Showing 1–43 of 43 results for author: Calonico, D

Phase Noise in Real-World Twin-Field Quantum Key Distribution

Authors: Gianluca Bertaina, Cecilia Clivati, Simone Donadello, Carlo Liorni, Alice Meda, Salvatore Virzì, Marco Gramegna, Marco Genovese, Filippo Levi, Davide Calonico, Massimiliano Dispenza, Ivo Pietro Degiovanni

Abstract: The impact of noise sources in real-world implementations of Twin-Field Quantum Key Distribution (TF-QKD) protocols is investigated, focusing on phase noise from photon sources and connecting fibers. This work emphasizes the role of laser quality, network topology, fiber length, arm balance, and detector performance in determining key rates. Remarkably, it reveals that the leading TF-QKD protocols… ▽ More The impact of noise sources in real-world implementations of Twin-Field Quantum Key Distribution (TF-QKD) protocols is investigated, focusing on phase noise from photon sources and connecting fibers. This work emphasizes the role of laser quality, network topology, fiber length, arm balance, and detector performance in determining key rates. Remarkably, it reveals that the leading TF-QKD protocols are similarly affected by phase noise despite different mechanisms. This study demonstrates duty cycle improvements of over a factor of two through narrow-linewidth lasers and phase-control techniques, highlighting the potential synergy with high-precision time/frequency distribution services. Ultrastable lasers, evolving toward integration and miniaturization, offer promise for agile TF-QKD implementations on existing networks. Properly addressing phase noise and practical constraints allows for consistent key rate predictions, protocol selection, and layout design, crucial for establishing secure long-haul links for the Quantum Communication Infrastructures under development in several countries. △ Less

Submitted 29 May, 2024; v1 submitted 12 October, 2023; originally announced October 2023.

Comments: 20 pages, 8 figures, 3 tables. Post-print version

Journal ref: Adv. Quantum Technol. 2400032 (2024)

Roadmap towards the redefinition of the second

Authors: N. Dimarcq, M. Gertsvolf, G. Mileti, S. Bize, C. W. Oates, E. Peik, D. Calonico, T. Ido, P. Tavella, F. Meynadier, G. Petit, G. Panfilo, J. Bartholomew, P. Defraigne, E. A. Donley, P. O. Hedekvist, I. Sesia, M. Wouters, P. Dube, F. Fang, F. Levi, J. Lodewyck, H. S. Margolis, D. Newell, S. Slyusarev , et al. (12 additional authors not shown)

Abstract: This paper outlines the roadmap towards the redefinition of the second, which was recently updated by the CCTF Task Force created by the CCTF in 2020. The main achievements and the open challenges related to the status of the optical frequency standards, their contribution to time scales and UTC, the possibility of their comparison and the knowledge of the Earth's gravitational potential at the ne… ▽ More This paper outlines the roadmap towards the redefinition of the second, which was recently updated by the CCTF Task Force created by the CCTF in 2020. The main achievements and the open challenges related to the status of the optical frequency standards, their contribution to time scales and UTC, the possibility of their comparison and the knowledge of the Earth's gravitational potential at the necessary level of uncertainty are discussed. In addition, the mandatory criteria to be achieved before redefinition and their current fulfilment level, together with the redefinition options based on a single or on a set of transitions are described. △ Less

Submitted 26 July, 2023; originally announced July 2023.

Comments: 26 pages. This paper is based on the work of a CCTF Task Force on the roadmap to the redefinition of the second

Journal ref: Metrologia 61 012001 (2024)

Seismic monitoring using the telecom fiber network

Authors: Simone Donadello, Cecilia Clivati, Aladino Govoni, Lucia Margheriti, Maurizio Vassallo, Daniele Brenda, Marianna Hovsepyan, Elio K. Bertacco, Roberto Concas, Filippo Levi, Alberto Mura, Andrè Herrero, Francesco Carpentieri, Davide Calonico

Abstract: Laser interferometry enables to remotely measure microscopical length changes of deployed telecommunication cables originating from earthquakes. Long range and compatibility with data traffic make it unique to the exploration of remote regions, as well as highly-populated areas where optical networks are pervasive, and its large-scale implementation is attractive for both Earth scientists and tele… ▽ More Laser interferometry enables to remotely measure microscopical length changes of deployed telecommunication cables originating from earthquakes. Long range and compatibility with data traffic make it unique to the exploration of remote regions, as well as highly-populated areas where optical networks are pervasive, and its large-scale implementation is attractive for both Earth scientists and telecom operators. However, validation and modeling of its response and sensitivity are still at an early stage and suffer from lack of statistically-significant event catalogs and limited availability of co-located seismometers. We implemented laser interferometry on a land-based telecommunication cable and analyzed 1.5 years of continuous acquisition, with successful detections of events in a broad range of magnitudes, including very weak ones. By comparing fiber and seismometer recordings we determined relations between a cable's detection probability and the magnitude and distance of events, and showed that spectral analysis of recorded data allows considerations on the earthquake dynamics. Our results reveal that quantitative analysis is possible for this sensing technique and support the interpretation of data from the growing amount of interferometric deployments. We anticipate the high integration and scalability of laser interferometry into existing telecommunication grids to be useful for the daily seismicity monitoring, in perspective exploitable for civilian protection use. △ Less

Submitted 8 July, 2024; v1 submitted 12 July, 2023; originally announced July 2023.

Journal ref: Communications Earth & Environment 5, 178 (2024)

Embedded digital phase noise analyzer for optical frequency metrology

Authors: Simone Donadello, Elio K. Bertacco, Davide Calonico, Cecilia Clivati

Abstract: Digital signal processing (DSP) is supporting novel in-field applications of optical interferometry, such as in laser ranging and distributed acoustic sensing. While the highest performances are achieved with field-programmable gated arrays (FPGAs), their complexity and cost are often too high for many tasks. Here, we describe an alternative solution for processing optical signals in real-time, ba… ▽ More Digital signal processing (DSP) is supporting novel in-field applications of optical interferometry, such as in laser ranging and distributed acoustic sensing. While the highest performances are achieved with field-programmable gated arrays (FPGAs), their complexity and cost are often too high for many tasks. Here, we describe an alternative solution for processing optical signals in real-time, based on a dual-core 32-bit microcontroller. We implemented in-phase and quadrature (IQ) demodulation of optical beat-notes resulting from the interference of independent laser sources, phase noise analysis of deployed optical fibers covering intercity distances, and synchronization of remote acquisitions via optical trigger signals. The embedded architecture can efficiently accomplish a large variety of tasks in the context of optical signal processing, being also easily configurable, compact, and upgradable. These features make it attractive for applications that require long-term, remotely operated, and field-deployed instrumentation. △ Less

Submitted 5 August, 2023; v1 submitted 3 February, 2023; originally announced February 2023.

Journal ref: IEEE Transactions on Instrumentation and Measurement, vol. 72, 2005412 (2023)

Absolute frequency measurement of a Yb optical clock at the limit of the Cs fountain

Authors: Irene Goti, Stefano Condio, Cecilia Clivati, Matias Risaro, Michele Gozzelino, Giovanni A. Costanzo, Filippo Levi, Davide Calonico, Marco Pizzocaro

Abstract: We present the new absolute frequency measurement of ytterbium (171Yb) obtained at INRiM with the optical lattice clock IT-Yb1 against the cryogenic caesium (133Cs) fountain IT-CsF2, evaluated through a measurement campaign that lasted 14 months. Measurements are performed by either using a hydrogen maser as a transfer oscillator or by synthesizing a low-noise microwave for Cs interrogation using… ▽ More We present the new absolute frequency measurement of ytterbium (171Yb) obtained at INRiM with the optical lattice clock IT-Yb1 against the cryogenic caesium (133Cs) fountain IT-CsF2, evaluated through a measurement campaign that lasted 14 months. Measurements are performed by either using a hydrogen maser as a transfer oscillator or by synthesizing a low-noise microwave for Cs interrogation using an optical frequency comb. The frequency of the 171Yb unperturbed clock transition 1S0 - 3P0 results to be 518 295 836 590 863.44(14) Hz, with a total fractional uncertainty of 2.7e-16 that is limited by the uncertainty of IT-CsF2. Our measurement is in agreement with the Yb frequency recommended by the Consultative Committee for Time and Frequency (CCTF). This result confirms the reliability of Yb as a secondary representation of the second and is relevant to the process of redefining the second in the International System of Units (SI) on an optical transition △ Less

Submitted 29 December, 2022; originally announced December 2022.

Frequency stability and phase noise measurements of a 5,860 km-long intercontinental seafloor optical fibre cable

Authors: Giuseppe Marra, Paul Gaynor, Mattia Cantono, Valey Kamalov, Sean Mulholland, Ian Hill, Marco Schioppo, Jacques-Olivier Gaudron, Irene-Barbeito Edreira, Cecilia Clivati, Davide Calonico

Abstract: Optical clock comparison via optical fibre links has been achieved over continental scales, but has not yet been demonstrated intercontinentally. The transfer of ultra-stable optical frequencies over transoceanic distances is a challenging task, as the seafloor cable architecture prevents the use of environmental noise suppression techniques currently employed on land-based metrological links. As… ▽ More Optical clock comparison via optical fibre links has been achieved over continental scales, but has not yet been demonstrated intercontinentally. The transfer of ultra-stable optical frequencies over transoceanic distances is a challenging task, as the seafloor cable architecture prevents the use of environmental noise suppression techniques currently employed on land-based metrological links. As a fundamental first step towards devising suitable frequency transfer techniques to enable future clock comparison on a global scale, here we show the free-running frequency stability and phase noise measurements of a transatlantic seafloor optical link between the UK and Canada. To the best of our knowledge, these are the first ever measurements of an intercontinental optical fibre link. △ Less

Submitted 5 December, 2022; originally announced December 2022.

Improving the resolution of comb-based frequency measurements using a track and hold amplifier

Authors: Matias Risaro, Paolo Savio, Marco Pizzocaro, Filippo Levi, Davide Calonico, Cecilia Clivati

Abstract: The advent of optical frequency standards with ultimate uncertainties in the low 1x10$^{-18}$ requires femtosecond frequency combs to support a similar level of resolution in the spectral transfer and the computation of optical frequency ratios. The related experimental challenges grow together with the number of optical frequencies to be measured simultaneously, as in many cases the comb's optica… ▽ More The advent of optical frequency standards with ultimate uncertainties in the low 1x10$^{-18}$ requires femtosecond frequency combs to support a similar level of resolution in the spectral transfer and the computation of optical frequency ratios. The related experimental challenges grow together with the number of optical frequencies to be measured simultaneously, as in many cases the comb's optical power does not allow reliable beatnote counting or tracking in all the spectral regions of interest. Here we describe the use of a track-and-hold amplifier to implement the gated detection, a previously proposed technique for improving the signal-to-noise ratio of the beatnote between a low-power tooth of the frequency comb and a continuous wave laser. We demonstrate a 12dB improvement in the signal-to-noise ratio of beatnotes involving a broadband-spanning optical comb as compared to traditional detection schemes. Our approach enables reliable and cycle-slip-free spectral purity transfer and reduces the system sensitivity to power drops in the comb spectrum. Being based on a single chip, it is robust, versatile and easily embedded in more complex experimental schemes. Keywords: frequency comb, spectral purity transfer, gated detection, track and hold amplifier. △ Less

Submitted 26 May, 2022; originally announced May 2022.

Cold Atoms in Space: Community Workshop Summary and Proposed Road-Map

Authors: Ivan Alonso, Cristiano Alpigiani, Brett Altschul, Henrique Araujo, Gianluigi Arduini, Jan Arlt, Leonardo Badurina, Antun Balaz, Satvika Bandarupally, Barry C Barish Michele Barone, Michele Barsanti, Steven Bass, Angelo Bassi, Baptiste Battelier, Charles F. A. Baynham, Quentin Beaufils, Aleksandar Belic, Joel Berge, Jose Bernabeu, Andrea Bertoldi, Robert Bingham, Sebastien Bize, Diego Blas, Kai Bongs, Philippe Bouyer , et al. (224 additional authors not shown)

Abstract: We summarize the discussions at a virtual Community Workshop on Cold Atoms in Space concerning the status of cold atom technologies, the prospective scientific and societal opportunities offered by their deployment in space, and the developments needed before cold atoms could be operated in space. The cold atom technologies discussed include atomic clocks, quantum gravimeters and accelerometers, a… ▽ More We summarize the discussions at a virtual Community Workshop on Cold Atoms in Space concerning the status of cold atom technologies, the prospective scientific and societal opportunities offered by their deployment in space, and the developments needed before cold atoms could be operated in space. The cold atom technologies discussed include atomic clocks, quantum gravimeters and accelerometers, and atom interferometers. Prospective applications include metrology, geodesy and measurement of terrestrial mass change due to, e.g., climate change, and fundamental science experiments such as tests of the equivalence principle, searches for dark matter, measurements of gravitational waves and tests of quantum mechanics. We review the current status of cold atom technologies and outline the requirements for their space qualification, including the development paths and the corresponding technical milestones, and identifying possible pathfinder missions to pave the way for missions to exploit the full potential of cold atoms in space. Finally, we present a first draft of a possible road-map for achieving these goals, that we propose for discussion by the interested cold atom, Earth Observation, fundamental physics and other prospective scientific user communities, together with ESA and national space and research funding agencies. △ Less

Submitted 19 January, 2022; originally announced January 2022.

Comments: Summary of the Community Workshop on Cold Atoms in Space and corresponding Road-map: https://indico.cern.ch/event/1064855/

Journal ref: EPJ Quantum Technol. 9, 30 (2022)

Optically loaded Strontium lattice clock with a single multi-wavelength reference cavity

Authors: Matteo Barbiero, Davide Calonico, Filippo Levi, Marco G. Tarallo

Abstract: We report on the realization of a new compact strontium optical clock using a 2-D magneto-optical-trap (2D-MOT) as cold atomic source and a multi-wavelength cavity as the frequency stabilization system. All needed optical frequencies are stabilized to a zero-thermal expansion high-finesse optical resonator and can be operated without frequency adjustments for weeks. We present the complete charact… ▽ More We report on the realization of a new compact strontium optical clock using a 2-D magneto-optical-trap (2D-MOT) as cold atomic source and a multi-wavelength cavity as the frequency stabilization system. All needed optical frequencies are stabilized to a zero-thermal expansion high-finesse optical resonator and can be operated without frequency adjustments for weeks. We present the complete characterization of the apparatus. Optical control of the atomic source allows us to perform low-noise clock operation without atomic signal normalization. Long- and short-term stability tests of the clock have been performed for the 88 Sr bosonic isotope by means of interleaved clock operation. Finally, we present the first preliminary accuracy budget of the system. △ Less

Submitted 28 April, 2022; v1 submitted 19 November, 2021; originally announced November 2021.

Journal ref: IEEE Transactions on Instrumentation and Measurement, vol. 71, pp. 1-9, 2022, Art no. 1501509

Towards fully-fledged quantum and classical communication over deployed fiber with up-conversion module

Authors: Davide Bacco, Ilaria Vagniluca, Daniele Cozzolino, Søren M. M. Friis, Lasse Høgstedt, Andrea Giudice, Davide Calonico, Francesco Saverio Cataliotti, Karsten Rottwitt, Alessandro Zavatta

Abstract: Quantum key distribution (QKD), the distribution of quantum secured keys useful for data encryption, is expected to have a crucial impact in the next decades. However, although the notable achievements accomplished in the last twenty years, many practical and serious challenges are limiting the full deployment of this novel quantum technology in the current telecommunication infrastructures. In pa… ▽ More Quantum key distribution (QKD), the distribution of quantum secured keys useful for data encryption, is expected to have a crucial impact in the next decades. However, although the notable achievements accomplished in the last twenty years, many practical and serious challenges are limiting the full deployment of this novel quantum technology in the current telecommunication infrastructures. In particular, the co-propagation of quantum signals and high-speed data traffic within the same optical fiber, is not completely resolved, due to the intrinsic noise caused by the high intensity of the classical signals. As a consequence, current co-propagation schemes limit the amount of classical optical power in order to reduce the overall link noise. However, this ad-hoc solution restrains the overall range of possibilities for a large-scale QKD deployment. Here, we propose and demonstrate a new method, based on up-conversion assisted receiver, for co-propagating classical light and QKD signals. In addition, we compare the performances of this scheme with an off-the-shelf quantum receiver, equipped with a standard InGaAs detector, over different lengths of an installed fiber link. Our proposal exhibits higher tolerance for noise in comparison to the standard receiver, thus enabling the distribution of secret keys in the condition of 4 dB-higher classical power. △ Less

Submitted 9 June, 2021; originally announced June 2021.

Comments: 13 figures

Journal ref: Advanced Quantum Technologies 2021, 2000156

SI-traceable frequency dissemination at 1572.06 nm in a stabilized fiber network with ring topology

Authors: Dominik Husmann, Laurent-Guy Bernier, Mathieu Bertrand, Davide Calonico, Konstantinos Chaloulos, Gloria Clausen, Cecilia Clivati, Jérôme Faist, Ernst Heiri, Urs Hollenstein, Anatoly Johnson, Fabian Mauchle, Ziv Meir, Frédéric Merkt, Alberto Mura, Giacomo Scalari, Simon Scheidegger, Hansjürg Schmutz, Mudit Sinhal, Stefan Willitsch, Jacques Morel

Abstract: Frequency dissemination in phase-stabilized optical fiber networks for metrological frequency comparisons and precision measurements are promising candidates to overcome the limitations imposed by satellite techniques. However, network constraints restrict the availability of dedicated channels in the commonly-used C-band. Here, we demonstrate the dissemination of an SI-traceable ultrastable optic… ▽ More Frequency dissemination in phase-stabilized optical fiber networks for metrological frequency comparisons and precision measurements are promising candidates to overcome the limitations imposed by satellite techniques. However, network constraints restrict the availability of dedicated channels in the commonly-used C-band. Here, we demonstrate the dissemination of an SI-traceable ultrastable optical frequency in the L-band over a 456 km fiber network with ring topology, in which telecommunication data traffic occupies the full C-band. We characterize the optical phase noise and evaluate a link instability of $4.7\cdot 10^{-16}$ at 1 s and $3.8\cdot 10^{-19}$ at 2000 s integration time, and a link accuracy of $2\cdot 10^{-18}$, which is comparable to existing metrology networks in the C-band. We demonstrate the application of the disseminated frequency by establishing the SI-traceability of a laser in a remote laboratory. Finally, we show that our metrological frequency does not interfere with data traffic in the telecommunication channels. Our approach combines an unconventional spectral choice in the telecommunication L-band with established frequency-stabilization techniques, providing a novel, cost-effective solution for ultrastable frequency-comparison and dissemination, and may contribute to a foundation of a world-wide metrological network. △ Less

Submitted 19 April, 2021; originally announced April 2021.

Comments: 10 pages, 6 figures

Coherent phase transfer for real-world twin-field quantum key distribution

Authors: Cecilia Clivati, Alice Meda, Simone Donadello, Salvatore Virzì, Marco Genovese, Filippo Levi, Alberto Mura, Mirko Pittaluga, Zhiliang L. Yuan, Andrew J. Shields, Marco Lucamarini, Ivo Pietro Degiovanni, Davide Calonico

Abstract: Quantum mechanics allows the distribution of intrinsically secure encryption keys by optical means. Twin-field quantum key distribution is the most promising technique for its implementation on long-distance fibers, but requires stabilizing the optical length of the communication channels between parties. In proof-of-principle experiments based on spooled fibers, this was achieved by interleaving… ▽ More Quantum mechanics allows the distribution of intrinsically secure encryption keys by optical means. Twin-field quantum key distribution is the most promising technique for its implementation on long-distance fibers, but requires stabilizing the optical length of the communication channels between parties. In proof-of-principle experiments based on spooled fibers, this was achieved by interleaving the quantum communication with periodical adjustment frames. In this approach, longer duty cycles for the key streaming come at the cost of a looser control of channel length, and a successful key-transfer using this technique in a real world remains a significant challenge. Using interferometry techniques derived from frequency metrology, we developed a solution for the simultaneous key streaming and channel length control, and demonstrate it on a 206 km field-deployed fiber with 65 dB loss. Our technique reduces the quantum-bit-error-rate contributed by channel length variations to <1%, representing an effective solution for real-world quantum communications. △ Less

Submitted 30 December, 2020; originally announced December 2020.

Journal ref: Nature Communications13, 157 (2022)

Direct comparisons of European primary and secondary frequency standards via satellite techniques

Authors: F. Riedel, A. Al-Masoudi, E. Benkler, S. Dörscher, V. Gerginov, C. Grebing, S. Häfner, N. Huntemann, B. Lipphardt, C. Lisdat, E. Peik, D. Piester, C. Sanner, C. Tamm, S. Weyers, H. Denker, L. Timmen, C. Voigt, D. Calonico, G. Cerretto, G. A. Costanzo, F. Levi, I. Sesia, J. Achkar, J. Guèna , et al. (24 additional authors not shown)

Abstract: We carried out a 26-day comparison of five simultaneously operated optical clocks and six atomic fountain clocks located at INRIM, LNE-SYRTE, NPL and PTB by using two satellite-based frequency comparison techniques: broadband Two-Way Satellite Time and Frequency Transfer (TWSTFT) and Global Positioning System Precise Point Positioning (GPS PPP). With an enhanced statistical analysis procedure taki… ▽ More We carried out a 26-day comparison of five simultaneously operated optical clocks and six atomic fountain clocks located at INRIM, LNE-SYRTE, NPL and PTB by using two satellite-based frequency comparison techniques: broadband Two-Way Satellite Time and Frequency Transfer (TWSTFT) and Global Positioning System Precise Point Positioning (GPS PPP). With an enhanced statistical analysis procedure taking into account correlations and gaps in the measurement data, combined overall uncertainties in the range of $1.8 \times 10^{-16}$ to $3.5 \times 10^{-16}$ for the optical clock comparisons were found. The comparison of the fountain clocks yields results with a maximum relative frequency difference of $6.9 \times 10^{-16}$, and combined overall uncertainties in the range of $4.8 \times 10^{-16}$ to $7.7 \times 10^{-16}$. △ Less

Submitted 9 October, 2019; originally announced October 2019.

A Sideband-Enhanced Cold Atomic Source For Optical Clocks

Authors: Matteo Barbiero, Marco G. Tarallo, Davide Calonico, Filippo Levi, G. Lamporesi, G. Ferrari

Abstract: We demonstrate the enhancement and optimization of a cold strontium atomic beam from a two-dimensional magneto-optical trap (2D-MOT) transversely loaded from a collimated atomic beam by adding a sideband frequency to the cooling laser. The parameters of the cooling and sideband beams were scanned to achieve the maximum atomic beam flux and compared with Monte Carlo simulations. We obtained a 2.3 t… ▽ More We demonstrate the enhancement and optimization of a cold strontium atomic beam from a two-dimensional magneto-optical trap (2D-MOT) transversely loaded from a collimated atomic beam by adding a sideband frequency to the cooling laser. The parameters of the cooling and sideband beams were scanned to achieve the maximum atomic beam flux and compared with Monte Carlo simulations. We obtained a 2.3 times larger, and 4 times brighter, atomic flux than a conventional, single-frequency 2D-MOT, for a given total power of 200 mW. We show that the sideband-enhanced 2D-MOT can reach the loading rate performances of space demanding Zeeman slower-based systems, while it can overcome systematic effects due to thermal beam collisions and hot black-body radiation shift, making it suitable for both transportable and accurate optical lattice clocks. Finally we numerically studied the possible extensions of the sideband-enhanced 2D-MOT to other alkaline-earth species. △ Less

Submitted 12 September, 2019; originally announced September 2019.

Journal ref: Phys. Rev. Applied 13, 014013 (2020)

Exploring the Foundations of the Universe with Space Tests of the Equivalence Principle

Authors: Baptiste Battelier, Joël Bergé, Andrea Bertoldi, Luc Blanchet, Kai Bongs, Philippe Bouyer, Claus Braxmaier, Davide Calonico, Pierre Fayet, Naceur Gaaloul, Christine Guerlin, Aurélien Hees, Philippe Jetzer, Claus Lämmerzahl, Steve Lecomte, Christophe Le Poncin-Lafitte, Sina Loriani, Gilles Métris, Miguel Nofrarias, Ernst Rasel, Serge Reynaud, Manuel Rodrigues, Markus Rothacher, Albert Roura, Christophe Salomon , et al. (12 additional authors not shown)

Abstract: We present the scientific motivation for future space tests of the equivalence principle, and in particular the universality of free fall, at the $10^{-17}$ level or better. Two possible mission scenarios, one based on quantum technologies, the other on electrostatic accelerometers, that could reach that goal are briefly discussed. We present the scientific motivation for future space tests of the equivalence principle, and in particular the universality of free fall, at the $10^{-17}$ level or better. Two possible mission scenarios, one based on quantum technologies, the other on electrostatic accelerometers, that could reach that goal are briefly discussed. △ Less

Submitted 12 December, 2019; v1 submitted 30 August, 2019; originally announced August 2019.

Comments: White paper submitted to the ESA Voyage 2050 long term plan. Partly derived from Altschul et al., Advances in Space Research, 2015, 55, 501 - 524, arXiv:1404.4307

Journal ref: Experimental Astronomy (2021) 51:1695-1736

Passively stable distribution of polarisation entanglement over 192 km of deployed optical fibre

Authors: Sören Wengerowsky, Siddarth Koduru Joshi, Fabian Steinlechner, Julien R. Zichi, Bo Liu, Thomas Scheidl, Sergiy M. Dobrovolskiy, René van der Molen, Johannes W. N. Los, Val Zwiller, Marijn A. M. Versteegh, Alberto Mura, Davide Calonico, Massimo Inguscio, Anton Zeilinger, André Xuereb, Rupert Ursin

Abstract: Quantum key distribution (QKD) based on entangled photon pairs holds the potential for repeater-based quantum networks connecting clients over long distance. We demonstrate long-distance entanglement distribution by means of polarisation-entangled photon pairs through two successive deployed 96 km-long telecommunications fibres in the same submarine cable. One photon of each pair was detected dire… ▽ More Quantum key distribution (QKD) based on entangled photon pairs holds the potential for repeater-based quantum networks connecting clients over long distance. We demonstrate long-distance entanglement distribution by means of polarisation-entangled photon pairs through two successive deployed 96 km-long telecommunications fibres in the same submarine cable. One photon of each pair was detected directly after the source, while the other travelled the fibre cable in both directions for a total distance of 192 km and attenuation of 48 dB. The observed two-photon Bell state exhibited a fidelity 85% $\pm$ 2% and was stable over several hours. We employed neither active stabilisation of the quantum state nor chromatic dispersion compensation for the fibre. △ Less

Submitted 10 July, 2019; originally announced July 2019.

Comments: 7 pages, 3 figures

Journal ref: npj Quantum Inf 6, 5 (2020)

Room-Temperature Continuous-Wave Frequency-Referenced Spectrometer up to 7.5 THz

Authors: Michele De Regis, Saverio Bartalini, Marco Ravaro, Davide Calonico, Paolo De Natale, Luigi Consolino

Abstract: The lack of coherent room-temperature sources in the whole terahertz spectral window (0.3-10 THz) has significantly hampered the growth of scientific and technological applications in this range. Among them, high-precision frequency measurements of molecular transitions play a central role but remain an open challenge. Here, room-temperature generation and detection of continuous-wave, broadly tun… ▽ More The lack of coherent room-temperature sources in the whole terahertz spectral window (0.3-10 THz) has significantly hampered the growth of scientific and technological applications in this range. Among them, high-precision frequency measurements of molecular transitions play a central role but remain an open challenge. Here, room-temperature generation and detection of continuous-wave, broadly tunable, narrow-linewidth THz radiation are presented, and their application to high-resolution spectroscopy in the broad 1-7.5 THz spectral range is demonstrated. This result has been achieved by implementing a Cherenkov phase-matching scheme into a channel waveguide in a nonlinear crystal. This simple approach, entirely based on robust telecom technology, unprecedently merges in a single source an ultra-broad continuous-wave spectral coverage and a state-of-the-art accuracy (approximately 10-9) in molecular-transition-center determination. △ Less

Submitted 2 May, 2019; originally announced May 2019.

Field trial of a finite-key quantum key distribution system in the Florence metropolitan area

Authors: Davide Bacco, Ilaria Vagniluca, Beatrice Da Lio, Nicola Biagi, Adriano Della Frera, Davide Calonico, Costanza Toninelli, Francesco S. Cataliotti, Marco Bellini, Leif K. Oxenløwe, Alessandro Zavatta

Abstract: In-field demonstrations in real-world scenarios boost the development of a rising technology towards its integration in existing infrastructures. Although quantum key distribution (QKD) devices are already adopted outside the laboratories, current field implementations still suffer from high costs and low performances, preventing this emerging technology from a large-scale deployment in telecommun… ▽ More In-field demonstrations in real-world scenarios boost the development of a rising technology towards its integration in existing infrastructures. Although quantum key distribution (QKD) devices are already adopted outside the laboratories, current field implementations still suffer from high costs and low performances, preventing this emerging technology from a large-scale deployment in telecommunication networks. Here we present a simple, practical and efficient QKD scheme with finite-key analysis, performed over a 21 dB-losses fiber link installed in the metropolitan area of Florence (Italy). Coexistence of quantum and weak classical communication is also demonstrated by transmitting an optical synchronization signal through the same fiber link. △ Less

Submitted 29 March, 2019; originally announced March 2019.

Comments: 6 pages, 6 figures

Phase noise cancellation in polarisation-maintaining fibre links

Authors: Benjamin Rauf, Maria Carmen Velez Lopez, Pierre Thoumany, Marco Pizzocaro, Davide Calonico

Abstract: The distribution of ultra-narrow linewidth laser radiation is an integral part of many challenging metrological applications. Changes in the optical pathlength induced by environmental disturbances compromise the stability and accuracy of optical fibre networks distributing the laser light and call for active phase noise cancellation. Here we present a laboratory scale optical (at 578 nm) fibre ne… ▽ More The distribution of ultra-narrow linewidth laser radiation is an integral part of many challenging metrological applications. Changes in the optical pathlength induced by environmental disturbances compromise the stability and accuracy of optical fibre networks distributing the laser light and call for active phase noise cancellation. Here we present a laboratory scale optical (at 578 nm) fibre network featuring all polarisation maintaining fibres in a setup with low optical powers available and tracking voltage-controlled oscillators implemented. The stability and accuracy of this system reach performance levels below 1 * 10^(-19) after 10 000 s of averaging △ Less

Submitted 25 July, 2018; originally announced July 2018.

Comments: This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. The following article appeared in "Phase noise cancellation in polarisation-maintaining fibre links", Rauf et al., Review of Scientific Instruments, 89, 033103 (2018) and may be found at https://doi.org/10.1063/1.5016514

Journal ref: Review of Scientific Instruments, 89, 033103 (2018)

In-field entanglement distribution over a 96 km-long submarine optical fibre

Authors: Sören Wengerowsky, Siddarth Koduru Joshi, Fabian Steinlechner, Julien R. Zichi, Sergiy. M. Dobrovolskiy, René van der Molen, Johannes W. N. Los, Val Zwiller, Marijn A. M. Versteegh, Alberto Mura, Davide Calonico, Massimo Inguscio, Hannes Hübel, Anton Zeilinger, André Xuereb, Rupert Ursin

Abstract: Techniques for the distribution of quantum-secured cryptographic keys have reached a level of maturity allowing them to be implemented in all kinds of environments, away from any form of laboratory infrastructure. Here, we detail the distribution of entanglement between Malta and Sicily over a 96 km-long submarine telecommunications optical fibre cable. We used this standard telecommunications fib… ▽ More Techniques for the distribution of quantum-secured cryptographic keys have reached a level of maturity allowing them to be implemented in all kinds of environments, away from any form of laboratory infrastructure. Here, we detail the distribution of entanglement between Malta and Sicily over a 96 km-long submarine telecommunications optical fibre cable. We used this standard telecommunications fibre as a quantum channel to distribute polarisation-entangled photons and were able to observe around 257 photon pairs per second, with a polarisation visibility above 90%. Our experiment demonstrates the feasibility of using deployed submarine telecommunications optical fibres as long-distance quantum channels for polarisation-entangled photons. This opens up a plethora of possibilities for future experiments and technological applications using existing infrastructure. △ Less

Submitted 1 March, 2018; originally announced March 2018.

Comments: 6 pages, 4 figures

Journal ref: PNAS 116 (14), 6684-6688 (2019)

Seismology with optical links: enabling a global network for submarine earthquake monitoring

Authors: Giuseppe Marra, Cecilia Clivati, Luckett Richard, Anna Tampellini, Jochen Kronjäger, Louise Wright, Alberto Mura, Filippo Levi, Stephen Robinson, André Xuereb, Brian Baptie, Davide Calonico

Abstract: Earthquake monitoring across the globe is currently achieved with networks of seismic stations. The data from these networks have been instrumental in advancing our understanding of the Earth's interior structure and dynamic behaviour. However, almost all seismic stations are located on land and earthquakes of magnitude smaller than 4 at the bottom of the oceans remain largely undetected. Here we… ▽ More Earthquake monitoring across the globe is currently achieved with networks of seismic stations. The data from these networks have been instrumental in advancing our understanding of the Earth's interior structure and dynamic behaviour. However, almost all seismic stations are located on land and earthquakes of magnitude smaller than 4 at the bottom of the oceans remain largely undetected. Here we show that ordinary telecommunication optical fibre links can detect seismic events when combined with state-of-the-art frequency metrology techniques. We have detected earthquakes over terrestrial and submarine optical fibre links with length ranging from 75 to 535 km and a geographical distance from the earthquake's epicentre ranging from 25 to 18,500 km. In contrast to existing commercial reflectometry-based acoustic sensing methods used widely in the oil and gas industry, which are limited to only a few tens of kilometres, the technique presented here can be extended over thousands of kilometres, paving the way for detection of remote underwater earthquakes. By using the proposed technique on the existing extensive submarine optical fibre infrastructure, which already criss-crosses the seas and oceans, a global seismic network for real-time detection of underwater earthquakes could be implemented. The ability to detect off-shore earthquakes closer to the source could also enable a cost-effective solution for early detection of tsunamis. △ Less

Submitted 18 December, 2017; originally announced January 2018.

Comments: 10 pages, 4 figures

Geodesy and metrology with a transportable optical clock

Authors: Jacopo Grotti, Silvio Koller, Stefan Vogt, Sebastian Häfner, Uwe Sterr, Christian Lisdat, Heiner Denker, Christian Voigt, Ludger Timmen, Antoine Rolland, Fred N. Baynes, Helen S. Margolis, Michel Zampaolo, Pierre Thoumany, Marco Pizzocaro, Benjamin Rauf, Filippo Bregolin, Anna Tampellini, Piero Barbieri, Massimo Zucco, Giovanni A. Costanzo, Cecilia Clivati, Filippo Levi, Davide Calonico

Abstract: The advent of novel measurement instrumentation can lead to paradigm shifts in scientific research. Optical atomic clocks, due to their unprecedented stability and uncertainty, are already being used to test physical theories and herald a revision of the International System of units (SI). However, to unlock their potential for cross-disciplinary applications such as relativistic geodesy, a major… ▽ More The advent of novel measurement instrumentation can lead to paradigm shifts in scientific research. Optical atomic clocks, due to their unprecedented stability and uncertainty, are already being used to test physical theories and herald a revision of the International System of units (SI). However, to unlock their potential for cross-disciplinary applications such as relativistic geodesy, a major challenge remains. This is their transformation from highly specialized instruments restricted to national metrology laboratories into flexible devices deployable in different locations. Here we report the first field measurement campaign performed with a ubiquitously applicable $^{87}$Sr optical lattice clock. We use it to determine the gravity potential difference between the middle of a mountain and a location 90 km apart, exploiting both local and remote clock comparisons to eliminate potential clock errors. A local comparison with a $^{171}$Yb lattice clock also serves as an important check on the international consistency of independently developed optical clocks. This campaign demonstrates the exciting prospects for transportable optical clocks. △ Less

Submitted 11 May, 2017; originally announced May 2017.

Measuring molecular frequencies in the 1--10 μm range at 11-digits accuracy

Authors: G. Insero, S. Borri, D. Calonico, P. Cancio Pastor, C. Clivati, D. D'Ambrosio, P. De Natale, M. Inguscio, F. Levi, G. Santambrogio

Abstract: Mid infrared (MIR) photonics is a key region for molecular physics [1]. High-resolution spectroscopy in the 1--10 μm region, though, has never been fully tackled for the lack of widely-tunable and practical light sources. Indeed, all solutions proposed thus far suffer from at least one of three issues: they are feasible only in a narrow spectral range; the power available for spectroscopy is limit… ▽ More Mid infrared (MIR) photonics is a key region for molecular physics [1]. High-resolution spectroscopy in the 1--10 μm region, though, has never been fully tackled for the lack of widely-tunable and practical light sources. Indeed, all solutions proposed thus far suffer from at least one of three issues: they are feasible only in a narrow spectral range; the power available for spectroscopy is limited; the frequency accuracy is poor. Here, we present a setup for high-resolution spectroscopy that can be applied in the whole 1--10 μm range by combining the power of quantum cascade lasers (QCLs) and the accuracy achievable by difference frequency generation using an OP-GaP crystal. The frequency is measured against a primary frequency standard using the Italian metrological fibre link network. We demonstrate the performance of the setup by measuring a vibrational transition in a highly-excited metastable state of CO around 6 μm with 11 digits of precision, four orders of magnitude better than the value available in the literature [2]. △ Less

Submitted 18 May, 2017; v1 submitted 31 March, 2017; originally announced March 2017.

Comments: 6 pages, 3 figures

Synthetic dimensions and spin-orbit coupling with an optical clock transition

Authors: L. F. Livi, G. Cappellini, M. Diem, L. Franchi, C. Clivati, M. Frittelli, F. Levi, D. Calonico, J. Catani, M. Inguscio, L. Fallani

Abstract: We demonstrate a novel way of synthesizing spin-orbit interactions in ultracold quantum gases, based on a single-photon optical clock transition coupling two long-lived electronic states of two-electron $^{173}$Yb atoms. By map** the electronic states onto effective sites along a synthetic "electronic" dimension, we have engineered synthetic fermionic ladders with tunable magnetic fluxes. We hav… ▽ More We demonstrate a novel way of synthesizing spin-orbit interactions in ultracold quantum gases, based on a single-photon optical clock transition coupling two long-lived electronic states of two-electron $^{173}$Yb atoms. By map** the electronic states onto effective sites along a synthetic "electronic" dimension, we have engineered synthetic fermionic ladders with tunable magnetic fluxes. We have detected the spin-orbit coupling with fiber-link-enhanced clock spectroscopy and directly measured the emergence of chiral edge currents, probing them as a function of the magnetic field flux. These results open new directions for the investigation of topological states of matter with ultracold atomic gases. △ Less

Submitted 18 September, 2016; v1 submitted 15 September, 2016; originally announced September 2016.

Comments: Minor changes with respect to v1 (we have corrected some typos, fixed the use of some mathematical symbols, added one reference)

Journal ref: Phys. Rev. Lett. 117, 220401 (2016)

Absolute frequency measurement of the 1S0 - 3P0 transition of 171Yb

Authors: Marco Pizzocaro, Pierre Thoumany, Benjamin Rauf, Filippo Bregolin, Gianmaria Milani, Cecilia Clivati, Giovanni A. Costanzo, Filippo Levi, Davide Calonico

Abstract: We report the absolute frequency measurement of the unperturbed transition 1S0 - 3P0 at 578 nm in 171Yb realized in an optical lattice frequency standard. The absolute frequency is measured 518 295 836 590 863.55(28) Hz relative to a cryogenic caesium fountain with a fractional uncertainty of 5.4x10-16 . This value is in agreement with the ytterbium frequency recommended as a secondary representat… ▽ More We report the absolute frequency measurement of the unperturbed transition 1S0 - 3P0 at 578 nm in 171Yb realized in an optical lattice frequency standard. The absolute frequency is measured 518 295 836 590 863.55(28) Hz relative to a cryogenic caesium fountain with a fractional uncertainty of 5.4x10-16 . This value is in agreement with the ytterbium frequency recommended as a secondary representation of the second in the International System of Units. △ Less

Submitted 20 January, 2017; v1 submitted 6 September, 2016; originally announced September 2016.

Comments: This is an author-created, un-copyedited version of an article accepted for publication/published in Metrologia. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at http://dx.doi.org/10.1088/1681-7575/aa4e62. It is published under a CC BY licence

Journal ref: Metrologia 54 (2017) 102-112

Realization of a twin beam source based on four-wave mixing in Cesium

Authors: G. Adenier, D. Calonico, S. Micalizio, N. Samantaray, I. P. Degiovanni, I. Ruo Berchera

Abstract: Four-wave mixing (4WM) is a known source of intense non-classical twin beams. It can be generated when an intense laser beam (the pump) and a weak laser beam (the seed) overlap in a $χ^{(3)}$ medium (here cesium vapor), with frequencies close to resonance with atomic transitions. The twin beams generated by 4WM have frequencies naturally close to atomic transitions, and can be intense (gain… ▽ More Four-wave mixing (4WM) is a known source of intense non-classical twin beams. It can be generated when an intense laser beam (the pump) and a weak laser beam (the seed) overlap in a $χ^{(3)}$ medium (here cesium vapor), with frequencies close to resonance with atomic transitions. The twin beams generated by 4WM have frequencies naturally close to atomic transitions, and can be intense (gain $\gg 1$) even in the CW pump regime, which is not the case for PDC $χ^{(2)}$ phenomenon in non-linear crystals. So, 4WM is well suited for atom-light interaction and atom-based quantum protocols. Here we present the first realization of a source of 4-wave mixing exploiting $D_2$ line of Cesium atoms. △ Less

Submitted 6 April, 2016; originally announced April 2016.

Comments: 10 pages, 10 figures

Measuring absolute frequencies beyond the GPS limit via long-haul optical frequency dissemination

Authors: C. Clivati, G. Cappellini, L. Livi, F. Poggiali, M. Siciliani de Cumis, M. Mancini, G. Pagano, M. Frittelli, A. Mura, G. A. Costanzo, F. Levi, D. Calonico, L. Fallani, J. Catani, M. Inguscio

Abstract: Global Positioning System (GPS) dissemination of frequency standards is ubiquitous at present, providing the most widespread time and frequency reference for the majority of industrial and research applications worldwide. On the other hand, the ultimate limits of the GPS presently curb further advances in high-precision, scientific and industrial applications relying on this dissemination scheme.… ▽ More Global Positioning System (GPS) dissemination of frequency standards is ubiquitous at present, providing the most widespread time and frequency reference for the majority of industrial and research applications worldwide. On the other hand, the ultimate limits of the GPS presently curb further advances in high-precision, scientific and industrial applications relying on this dissemination scheme. Here, we demonstrate that these limits can be reliably overcome even in laboratories without a local atomic clock by replacing the GPS with a 642-km-long optical fiber link to a remote primary caesium frequency standard. Through this configuration we stably address the $^1$S$_0$---$^3$P$_0$ clock transition in an ultracold gas of $^{173}$Yb, with a precision that exceeds the possibilities of a GPS-based measurement, dismissing the need for a local clock infrastructure to perform high-precision tasks beyond GPS limit. We also report an improvement of two orders of magnitude in the accuracy on the transition frequency reported in literature. △ Less

Submitted 26 November, 2015; originally announced November 2015.

Yellow laser performance of Dy$^{3+}$ in co-doped Dy,Tb:LiLuF$_4$

Authors: Giacomo Bolognesi, Daniela Parisi, Davide Calonico, Giovanni Antonio Costanzo, Filippo Levi, Philip Werner Metz, Christian Kränkel, Günter Huber, Mauro Tonelli

Abstract: We present laser results obtained from a Dy$^{3+}$-Tb$^{3+}$ co-doped LiLuF$_{4}$ crystal, pumped by a blue emitting InGaN laser diode, aiming for the generation of a compact 578 nm source. We exploit the yellow Dy$^{3+}$ transition $^{4}$F$_{9/2}$ $\Longrightarrow$ $^{6}$H$_{13/2}$ to generate yellow laser emission. The lifetime of the lower laser level is quenched via energy transfer to co-doped… ▽ More We present laser results obtained from a Dy$^{3+}$-Tb$^{3+}$ co-doped LiLuF$_{4}$ crystal, pumped by a blue emitting InGaN laser diode, aiming for the generation of a compact 578 nm source. We exploit the yellow Dy$^{3+}$ transition $^{4}$F$_{9/2}$ $\Longrightarrow$ $^{6}$H$_{13/2}$ to generate yellow laser emission. The lifetime of the lower laser level is quenched via energy transfer to co-doped Tb$^{3+}$ ions in the fluoride crystal. We report the growth technique, spectroscopic study and room temperature continuous wave (cw) laser results in a hemispherical cavity at 574 nm and with a highly reflective output coupler at 578 nm. A yellow laser at 578 nm is very relevant for metrological applications, in particular for pum** of the forbidden $^{1}$S$_{0} \Longrightarrow ^{3}$P$_{0}$ Ytterbium clock transition, which is recommended as a secondary representation of the second in the international system (SI) of units. This paper was published in Optics Letters and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: http://dx.doi.org/10.1364/OL.39.006628. Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law. △ Less

Submitted 16 January, 2015; originally announced January 2015.

Comments: 8 pages, 5 figures

Journal ref: Optics Letters, Vol. 39, Issue 23, pp. 6628-6631 (2014)

Direct observation of coherent inter-orbital spin-exchange dynamics

Authors: Giacomo Cappellini, Marco Mancini, Guido Pagano, Pietro Lombardi, Lorenzo Livi, Mario Siciliani de Cumis, Pablo Cancio, Marco Pizzocaro, Davide Calonico, Filippo Levi, Carlo Sias, Jacopo Catani, Massimo Inguscio, Leonardo Fallani

Abstract: We report on the first direct observation of fast spin-exchange coherent oscillations between different long-lived electronic orbitals of ultracold $^{173}$Yb fermions. We measure, in a model-independent way, the strength of the exchange interaction driving this coherent process. This observation allows us to retrieve important information on the inter-orbital collisional properties of $^{173}$Yb… ▽ More We report on the first direct observation of fast spin-exchange coherent oscillations between different long-lived electronic orbitals of ultracold $^{173}$Yb fermions. We measure, in a model-independent way, the strength of the exchange interaction driving this coherent process. This observation allows us to retrieve important information on the inter-orbital collisional properties of $^{173}$Yb atoms and paves the way to novel quantum simulations of paradigmatic models of two-orbital quantum magnetism. △ Less

Submitted 21 May, 2015; v1 submitted 25 June, 2014; originally announced June 2014.

Comments: In this version of the preprint we have swapped the assignment of the eg+ and eg- states to the spectroscopic signals, thus correcting a wrong attribution in the previous version. As a consequence, the scattering lengths of the two states have been inverted. Hovewer, the main results of the paper remain unchanged. 5 pages (paper) + 3 pages (Supplemental Material)

Journal ref: Phys. Rev. Lett. 113, 120402 (2014)

Beyond the fundamental noise limit in coherent optical fiber links

Authors: C. E. Calosso, E. Bertacco, D. Calonico, C. Clivati, G. A. Costanzo, M. Frittelli, F. Levi, S. Micalizio, A. Mura, A. Godone

Abstract: It is well known that temperature variations and acoustic noise affect ultrastable frequency dissemination along optical fiber. Active stabilization techniques are in general adopted to compensate for the fiber-induced phase noise. However, despite this compensation, the ultimate link performances remain limited by the so called delay-unsuppressed fiber noise that is related to the propagation del… ▽ More It is well known that temperature variations and acoustic noise affect ultrastable frequency dissemination along optical fiber. Active stabilization techniques are in general adopted to compensate for the fiber-induced phase noise. However, despite this compensation, the ultimate link performances remain limited by the so called delay-unsuppressed fiber noise that is related to the propagation delay of the light in the fiber. In this paper, we demonstrate a data post-processing approach which enables us to overcome this limit. We implement a subtraction algorithm between the optical signal delivered at the remote link end and the round-trip signal. In this way, a 6 dB improvement beyond the fundamental limit imposed by delay-unsuppressed noise is obtained. This result enhances the resolution of possible comparisons between remote optical clocks by a factor of 2. We confirm the theoretical prediction with experimental data obtained on a 47 km metropolitan fiber link, and propose how to extend this method for frequency dissemination purposes as well. △ Less

Submitted 1 July, 2014; v1 submitted 22 May, 2014; originally announced May 2014.

Journal ref: Opt. Lett. Vol. 40, no. 2, pp. 131-134 (2015)

Coherent optical frequency transfer at 5e-19 over a doubled 642 km fiber link

Authors: D. Calonico, E. K. Bertacco, C. E. Calosso, C. Clivati, G. A. Costanzo, M. Frittelli, A. Godone, A. Mura, N. Poli, D. V. Sutyrin, G. Tino, M. E. Zucco, F. Levi

Abstract: To significantly improve the frequency references used in radio-astronomy and precision measurements in atomic physics, we provide frequency dissemination through a 642 km coherent optical fiber link, that will be also part of a forthcoming European network of optical links. We obtained a resolution of 3e-19 at 1000 s on the frequency transfer, and an accuracy of 5e-19. The ultimate link performan… ▽ More To significantly improve the frequency references used in radio-astronomy and precision measurements in atomic physics, we provide frequency dissemination through a 642 km coherent optical fiber link, that will be also part of a forthcoming European network of optical links. We obtained a resolution of 3e-19 at 1000 s on the frequency transfer, and an accuracy of 5e-19. The ultimate link performance has been evaluated by doubling the link to 1284 km, demonstrating a new characterization technique based on the double round-trip on a single fiber. The arming of a second fiber is avoided: this is beneficial to long hauls realizations in view of a continental fiber network for frequency and time metrology. The data analysis is based on the Allan deviation; its expression is theoretically derived for the observed noise power spectrum, which is seldom found in the literature. △ Less

Submitted 1 July, 2014; v1 submitted 1 April, 2014; originally announced April 2014.

Journal ref: Appl. Phys. B, Vol. 117, no. 3, pp. 979-986, Nov. 2014

Efficient Frequency Doubling at 399 nm

Authors: Marco Pizzocaro, Davide Calonico, Pablo Cancio Pastor, Jacopo Catani, Giovanni A. Costanzo, Filippo Levi, Luca Lorini

Abstract: This article describes a high-power and narrow-linewidth laser source at 399 nm useful for cooling and trap** of ytterbium atoms. A continuous-wave titanium-sapphire laser at 798 nm is frequency doubled using a lithium triborate crystal in an enhancement cavity. Up to 1.0 W of light at 399 nm has been obtained from 1.3 W of infrared light, with an efficiency of 80 % This paper was published in… ▽ More This article describes a high-power and narrow-linewidth laser source at 399 nm useful for cooling and trap** of ytterbium atoms. A continuous-wave titanium-sapphire laser at 798 nm is frequency doubled using a lithium triborate crystal in an enhancement cavity. Up to 1.0 W of light at 399 nm has been obtained from 1.3 W of infrared light, with an efficiency of 80 % This paper was published in Applied Optics and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: http://www.opticsinfobase.org/ao/abstract.cfm?uri=ao-53-16-3388. Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law. △ Less

Submitted 21 May, 2014; v1 submitted 8 January, 2014; originally announced January 2014.

Journal ref: Applied Optics, Vol. 53, Issue 16, pp. 3388-3392 (2014)

Frequency transfer via a two-way optical phase comparison on a multiplexed fiber network

Authors: Claudio Calosso, Elio K. Bertacco, Davide Calonico, Cecilia Clivati, Giovanni A. Costanzo, Matteo Frittelli, Filippo Levi, Alberto Mura, Aldo Godone

Abstract: We performed a two-way remote optical phase comparison on optical fiber. Two optical frequency signals were launched in opposite directions in an optical fiber and their phases were simultaneously measured at the other end. In this technique, the fiber noise was passively cancelled, and we compared two optical frequencies at the ultimate 1E-21 stability level. The experiment was performed on a 47… ▽ More We performed a two-way remote optical phase comparison on optical fiber. Two optical frequency signals were launched in opposite directions in an optical fiber and their phases were simultaneously measured at the other end. In this technique, the fiber noise was passively cancelled, and we compared two optical frequencies at the ultimate 1E-21 stability level. The experiment was performed on a 47 km fiber that is part of the metropolitan network for Internet traffic. The technique relies on the synchronous measurement of the optical phases at the two ends of the link, that is made possible by the use of digital electronics. This scheme offers several advantages with respect to active noise cancellation, and can be upgraded to perform more complex tasks. △ Less

Submitted 1 July, 2014; v1 submitted 11 August, 2013; originally announced August 2013.

Journal ref: Opt. Lett. 39, p. 1177-1180 (2013)

A Large Area Fiber Optic Gyroscope on multiplexed fiber network

Authors: Cecilia Clivati, Davide Calonico, Giovanni A. Costanzo, Alberto Mura, Marco Pizzocaro, Filippo Levi

Abstract: We describe a fiber optical gyroscope based on the Sagnac effect realized on a multiplexed telecom fiber network. Our loop encloses an area of 20 km^2 and coexists with Internet data traffic. This Sagnac interferometer achieves a sensitivity of about 1e-8 (rad/s)/sqrt(Hz), thus approaching ring laser gyroscopes without using narrow-linewidth laser nor sophisticated optics. The proposed gyroscope i… ▽ More We describe a fiber optical gyroscope based on the Sagnac effect realized on a multiplexed telecom fiber network. Our loop encloses an area of 20 km^2 and coexists with Internet data traffic. This Sagnac interferometer achieves a sensitivity of about 1e-8 (rad/s)/sqrt(Hz), thus approaching ring laser gyroscopes without using narrow-linewidth laser nor sophisticated optics. The proposed gyroscope is sensitive enough for seismic applications, opening new possibilities for this kind of optical fiber sensors △ Less

Submitted 11 January, 2013; v1 submitted 22 December, 2012; originally announced December 2012.

Journal ref: Optics Letters 38, p. 1092-1094, 2013

Distributed Raman optical amplification in phase coherent transfer of optical frequencies

Authors: Cecilia Clivati, Gabriele Bolognini, Davide Calonico, Stefano Faralli, Filippo Levi, Alberto Mura, Nicola Poli

Abstract: We describe the application of Raman Optical-fiber Amplification (ROA) for the phase coherent transfer of optical frequencies in an optical fiber link. ROA uses the transmission fiber itself as a gain medium for bi-directional coherent amplification. In a test setup we evaluated the ROA in terms of on-off gain, signal-to-noise ratio, and phase noise added to the carrier. We transferred a laser fre… ▽ More We describe the application of Raman Optical-fiber Amplification (ROA) for the phase coherent transfer of optical frequencies in an optical fiber link. ROA uses the transmission fiber itself as a gain medium for bi-directional coherent amplification. In a test setup we evaluated the ROA in terms of on-off gain, signal-to-noise ratio, and phase noise added to the carrier. We transferred a laser frequency in a 200 km optical fiber link with an additional 16 dB fixed attenuator (equivalent to 275 km of fiber on a single span), and evaluated both co-propagating and counter-propagating amplification pump schemes, demonstrating nonlinear effects limiting the co-propagating pump configuration. The frequency at the remote end has a fractional frequency instability of 3e-19 over 1000 s with the optical fiber link noise compensation. △ Less

Submitted 16 November, 2012; originally announced November 2012.

Journal ref: IEEE Photon. Techn. Lett. 25, p. 1711-1714 (2013)

The Space Optical Clocks Project: Development of high-performance transportable and breadboard optical clocks and advanced subsystems

Authors: S. Schiller, A. Görlitz, A. Nevsky, S. Alighanbari, S. Vasilyev, C. Abou-Jaoudeh, G. Mura, T. Franzen, U. Sterr, S. Falke, Ch. Lisdat, E. Rasel, A. Kulosa, S. Bize, J. Lodewyck, G. M. Tino, N. Poli, M. Schioppo, K. Bongs, Y. Singh, P. Gill, G. Barwood, Y. Ovchinnikov, J. Stuhler, W. Kaenders , et al. (6 additional authors not shown)

Abstract: The use of ultra-precise optical clocks in space ("master clocks") will allow for a range of new applications in the fields of fundamental physics (tests of Einstein's theory of General Relativity, time and frequency metrology by means of the comparison of distant terrestrial clocks), geophysics (map** of the gravitational potential of Earth), and astronomy (providing local oscillators for radio… ▽ More The use of ultra-precise optical clocks in space ("master clocks") will allow for a range of new applications in the fields of fundamental physics (tests of Einstein's theory of General Relativity, time and frequency metrology by means of the comparison of distant terrestrial clocks), geophysics (map** of the gravitational potential of Earth), and astronomy (providing local oscillators for radio ranging and interferometry in space). Within the ELIPS-3 program of ESA, the "Space Optical Clocks" (SOC) project aims to install and to operate an optical lattice clock on the ISS towards the end of this decade, as a natural follow-on to the ACES mission, improving its performance by at least one order of magnitude. The payload is planned to include an optical lattice clock, as well as a frequency comb, a microwave link, and an optical link for comparisons of the ISS clock with ground clocks located in several countries and continents. Undertaking a necessary step towards optical clocks in space, the EU-FP7-SPACE-2010-1 project no. 263500 (SOC2) (2011-2015) aims at two "engineering confidence", accurate transportable lattice optical clock demonstrators having relative frequency instability below 1\times10^-15 at 1 s integration time and relative inaccuracy below 5\times10^-17. This goal performance is about 2 and 1 orders better in instability and inaccuracy, respectively, than today's best transportable clocks. The devices will be based on trapped neutral ytterbium and strontium atoms. One device will be a breadboard. The two systems will be validated in laboratory environments and their performance will be established by comparison with laboratory optical clocks and primary frequency standards. In this paper we present the project and the results achieved during the first year. △ Less

Submitted 17 June, 2012; originally announced June 2012.

Comments: Contribution to European Frequency and Time Forum 2012, Gothenburg, Sweden

Planar-Waveguide External Cavity Laser Stabilization for an Optical Link with 1E-19 Frequency Stability

Authors: Cecilia Clivati, Alberto Mura, Davide Calonico, Filippo Levi, Giovanni A. Costanzo, Claudio E. Calosso, Aldo Godone

Abstract: We stabilized the frequency of a compact planar-waveguide external cavity laser (ECL) on a Fabry-Pérot cavity (FPC) through a Pound-Drever-Hall scheme. The residual frequency stability of the ECL is 1E-14, comparable to the stability achievable with a fiber laser (FL) locked to a FPC through the same scheme. We set up an optical link of 100 km, based on fiber spools, that reaches 1E-19 relative st… ▽ More We stabilized the frequency of a compact planar-waveguide external cavity laser (ECL) on a Fabry-Pérot cavity (FPC) through a Pound-Drever-Hall scheme. The residual frequency stability of the ECL is 1E-14, comparable to the stability achievable with a fiber laser (FL) locked to a FPC through the same scheme. We set up an optical link of 100 km, based on fiber spools, that reaches 1E-19 relative stability, and we show that its performances using the ECL or FL are comparable. Thus ECLs could serve as an excellent replacement for FLs in optical links where cost-effectiveness and robustness are important considerations. △ Less

Submitted 8 December, 2011; v1 submitted 7 July, 2011; originally announced July 2011.

Journal ref: IEEE Trans. Ultrason. Ferroel. Freq. Contr. 58, p. 2582-2587 (2011)

Bayesian estimate of the zero-density frequency of a Cs fountain

Authors: D Calonico, F Levi, L Lorini, G Mana

Abstract: Caesium fountain frequency-standards realize the second in the International System of Units with a relative uncertainty approaching 10^-16. Among the main contributions to the accuracy budget, cold collisions play an important role because of the atomic density shift of the reference atomic transition. This paper describes an application of the Bayesian analysis of the clock frequency to estima… ▽ More Caesium fountain frequency-standards realize the second in the International System of Units with a relative uncertainty approaching 10^-16. Among the main contributions to the accuracy budget, cold collisions play an important role because of the atomic density shift of the reference atomic transition. This paper describes an application of the Bayesian analysis of the clock frequency to estimate the density shift and describes how the Bayes theorem allows the a priori knowledge of the sign of the collisional coefficient to be rigourously embedded into the analysis. As an application, data from the INRIM caesium fountain are used and the Bayesian and orthodox analyses are compared. The Bayes theorem allows the orthodox uncertainty to be reduced by 28% and demonstrates to be an important tool in primary frequency-metrology. △ Less

Submitted 28 July, 2009; originally announced July 2009.

Comments: 13 pages, 5 figures, submitted to Metrologia, application of the Bayes theorem to metrology

Bayesian inference of a negative quantity from positive measurement results

Authors: D Calonico, F Levi, L Lorini, G Mana

Abstract: In this paper the Bayesian analysis is applied to assign a probability density to the value of a quantity having a definite sign. This analysis is logically consistent with the results, positive or negative, of repeated measurements. Results are used to estimate the atom density shift in a caesium fountain clock. The comparison with the classical statistical analysis is also reported and the adv… ▽ More In this paper the Bayesian analysis is applied to assign a probability density to the value of a quantity having a definite sign. This analysis is logically consistent with the results, positive or negative, of repeated measurements. Results are used to estimate the atom density shift in a caesium fountain clock. The comparison with the classical statistical analysis is also reported and the advantages of the Bayesian approach for the realization of the time unit are discussed. △ Less

Submitted 17 February, 2009; originally announced February 2009.

Comments: 10 pages, 4 figures, submitted to Metrologia

Black Body Radiation Shift of the 133Cs Hyperfine Transition Frequency

Authors: S. Micalizio, A. Godone, D. Calonico, F. Levi, L. Lorini

Abstract: We report the theoretical evaluations of the static scalar polarizability of the 133Cs ground state and of the black body radiation shift induced on the transition frequency between the two hyperfine levels with m_F = 0. This shift is of fundamental importance in the evaluation of the accuracy of the primary frequency standards based on atomic fountains and employed in the realization of the SI… ▽ More We report the theoretical evaluations of the static scalar polarizability of the 133Cs ground state and of the black body radiation shift induced on the transition frequency between the two hyperfine levels with m_F = 0. This shift is of fundamental importance in the evaluation of the accuracy of the primary frequency standards based on atomic fountains and employed in the realization of the SI second in the International Atomic Time (TAI) scale at the level of 1e-15. Our computed value for the polarizability is alpha_0=6.600(16)e-39 Cm^2/V in agreement at the level of 1e-3 with recent theoretical and experimental values. As regards the black body radiation shift we .nd for the relative hyper.ne transition frequency beta=-1.49 (7)e-14 at T = 300 K in agreement with frequency measurements reported by our group and by Bauch and Schroder [Phys. Rev. Lett. 78, 622, (1997)]. This value is lower by 2e-15 than that obtained with measurements based on the dc Stark shift and than the value commonly accepted up to now. △ Less

Submitted 17 October, 2003; originally announced October 2003.

Comments: 18 pages, 2 figures, 6 tables

Measurement of the Blackbody Radiation Shift of the 133Cs Hyperfine Transition in an Atomic Fountain

Authors: F. Levi, D. Calonico, L. Lorini, S. Micalizio, A. Godone

Abstract: We used a Cs atomic fountain frequency standard to measure the Stark shift on the ground state hyperfine transiton frequency in cesium (9.2 GHz) due to the electric field generated by the blackbody radiation. The measures relative shift at 300 K is -1.43(11)e-14 and agrees with our theoretical evaluation -1.49(07)e-14. This value differs from the currently accepted one -1.69(04)e-14. The differe… ▽ More We used a Cs atomic fountain frequency standard to measure the Stark shift on the ground state hyperfine transiton frequency in cesium (9.2 GHz) due to the electric field generated by the blackbody radiation. The measures relative shift at 300 K is -1.43(11)e-14 and agrees with our theoretical evaluation -1.49(07)e-14. This value differs from the currently accepted one -1.69(04)e-14. The difference has a significant implication on the accuracy of frequency standards, in clocks comparison, and in a variety of high precision physics tests such as the time stability of fundamental constants. △ Less

Submitted 13 October, 2003; originally announced October 2003.

Comments: 4 pages, 2 figures, 2 tables

A Search for Variations of Fundamental Constants using Atomic Fountain Clocks

Authors: H. Marion, F. Pereira Dos Santos, M. Abgrall, S. Zhang, Y. Sortais, S. Bize, I. Maksimovic, D. Calonico, J. Gruenert, C. Mandache, P. Lemonde, G. Santarelli, Ph. Laurent, A. Clairon, C. Salomon

Abstract: Over five years we have compared the hyperfine frequencies of 133Cs and 87Rb atoms in their electronic ground state using several laser cooled 133Cs and 87Rb atomic fountains with an accuracy of ~10^{-15}. These measurements set a stringent upper bound to a possible fractional time variation of the ratio between the two frequencies : (d/dt)ln(nu_Rb/nu_Cs)=(0.2 +/- 7.0)*10^{-16} yr^{-1} (1 sigma… ▽ More Over five years we have compared the hyperfine frequencies of 133Cs and 87Rb atoms in their electronic ground state using several laser cooled 133Cs and 87Rb atomic fountains with an accuracy of ~10^{-15}. These measurements set a stringent upper bound to a possible fractional time variation of the ratio between the two frequencies : (d/dt)ln(nu_Rb/nu_Cs)=(0.2 +/- 7.0)*10^{-16} yr^{-1} (1 sigma uncertainty). The same limit applies to a possible variation of the quantity (mu_Rb/mu_Cs)*alpha^{-0.44}, which involves the ratio of nuclear magnetic moments and the fine structure constant. △ Less

Submitted 31 December, 2002; originally announced December 2002.

Comments: 4 pages, 3 figures, 1 table submitted to Phys. Rev. Lett

Journal ref: Phys.Rev.Lett. 90 (2003) 150801

133Cs87Rb Laser Cooled Dual Fountain

Authors: D. Calonico, Y. Sortais, S. Bize, H. Marion, C. Mandache, C. Salomon, G. Santarelli, A. Clairon

Abstract: At BNM-SYRTE laboratories in Paris two 133Cs fountains and a 87Rb one have been already demonstrated. This paper illustrates the construction of a 87Rb and Cs dual fountain realized within the same structure to work simultaneously. Up to now only the Cs part is under operation but Rb part, already completed, will be soon operational. The experiment has been projected to improve present fountain… ▽ More At BNM-SYRTE laboratories in Paris two 133Cs fountains and a 87Rb one have been already demonstrated. This paper illustrates the construction of a 87Rb and Cs dual fountain realized within the same structure to work simultaneously. Up to now only the Cs part is under operation but Rb part, already completed, will be soon operational. The experiment has been projected to improve present fountain frequency standards and to perform a more precise laboratory test (at 10E-16 level) on a possible time variation of the fine structure constant alpha, as recent cosmological evidences strongly motivates. △ Less

Submitted 10 December, 2002; originally announced December 2002.

Comments: 3 pages, 7 figures, 1 table