-
MmWave for Extended Reality: Open User Mobility Dataset, Characterisation, and Impact on Link Quality
Authors:
Alexander Marinsek,
Sam De Kunst,
Gilles Callebaut,
Lieven De Strycker,
Liesbet Van der Perre
Abstract:
User mobility in extended reality (XR) can have a major impact on millimeter-wave (mmWave) links and may require dedicated mitigation strategies to ensure reliable connections and avoid outage. The available prior art has predominantly focused on XR applications with constrained user mobility and limited impact on mmWave channels. We have performed dedicated experiments to extend the characterisat…
▽ More
User mobility in extended reality (XR) can have a major impact on millimeter-wave (mmWave) links and may require dedicated mitigation strategies to ensure reliable connections and avoid outage. The available prior art has predominantly focused on XR applications with constrained user mobility and limited impact on mmWave channels. We have performed dedicated experiments to extend the characterisation of relevant future XR use cases featuring a high degree of user mobility. To this end, we have carried out a tailor-made measurement campaign and conducted a characterisation of the collected tracking data, including the approximation of the data using statistical distributions. Moreover, we have provided an interpretation of the possible impact of the recorded mobility on mmWave technology. The dataset is made publicly accessible to provide a testing ground for wireless system design and to enable further XR mobility modelling.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
IoT on the Road to Sustainability: Vehicle or Bandit?
Authors:
Jona Cappelle,
Liesbet Van der Perre,
Emma Fitzgerald,
Simon Ravyts,
Weronika Gajda,
Valentijn De Smedt,
Bert Cox,
Gilles Callebaut
Abstract:
The Internet of Things (IoT) can support the evolution towards a digital and green future. However, the introduction of the technology clearly has in itself a direct adverse ecological impact. This paper assesses this impact at both the IoT-node and at the network side. For the nodes, we show that the electronics production of devices comes with a carbon footprint that can be much higher than duri…
▽ More
The Internet of Things (IoT) can support the evolution towards a digital and green future. However, the introduction of the technology clearly has in itself a direct adverse ecological impact. This paper assesses this impact at both the IoT-node and at the network side. For the nodes, we show that the electronics production of devices comes with a carbon footprint that can be much higher than during operation phase. We highlight that the inclusion of IoT support in existing cellular networks comes with a significant ecological penalty, raising overall energy consumption by more than 15%. These results call for novel design approaches for the nodes and for early consideration of the support for IoT in future networks. Raising the 'Vehicle or bandit?' question on the nature of IoT in the broader sense of sustainability, we illustrate the need for multidisciplinary cooperation to steer applications in desirable directions.
△ Less
Submitted 31 May, 2024;
originally announced May 2024.
-
Energy Reduction in Cell-Free Massive MIMO through Fine-Grained Resource Management
Authors:
Özlem Tuğfe Demir,
Lianet Méndez-Monsanto,
Nicola Bastianello,
Emma Fitzgerald,
Gilles Callebaut
Abstract:
The physical layer foundations of cell-free massive MIMO (CF-mMIMO) have been well-established. As a next step, researchers are investigating practical and energy-efficient network implementations. This paper focuses on multiple sets of access points (APs) where user equipments (UEs) are served in each set, termed a federation, without inter-federation interference. The combination of federations…
▽ More
The physical layer foundations of cell-free massive MIMO (CF-mMIMO) have been well-established. As a next step, researchers are investigating practical and energy-efficient network implementations. This paper focuses on multiple sets of access points (APs) where user equipments (UEs) are served in each set, termed a federation, without inter-federation interference. The combination of federations and CF-mMIMO shows promise for highly-loaded scenarios. Our aim is to minimize the total energy consumption while adhering to UE downlink data rate constraints. The energy expenditure of the full system is modelled using a detailed hardware model of the APs. We jointly design the AP-UE association variables, determine active APs, and assign APs and UEs to federations. To solve this highly combinatorial problem, we develop a novel alternating optimization algorithm. Simulation results for an indoor factory demonstrate the advantages of considering multiple federations, particularly when facing large data rate requirements. Furthermore, we show that adopting a more distributed CF-mMIMO architecture is necessary to meet the data rate requirements. Conversely, if feasible, using a less distributed system with more antennas at each AP is more advantageous from an energy savings perspective.
△ Less
Submitted 11 May, 2024;
originally announced May 2024.
-
Kee** Energy-Neutral Devices Operational: a Coherent Massive Beamforming Approach
Authors:
Jarne Van Mulders,
Bert Cox,
Benjamin J. B. Deutschmann,
Gilles Callebaut,
Lieven de Strycker,
Liesbet Van der Perre
Abstract:
Kee** the batteries on the shelf: this is the holy grail for low-cost Internet of Things (IoT) nodes. In this paper we study the potential of radio frequency (RF)-based wireless power transfer implementing coherent beamforming with many antennas to realize this ambitious target. We optimize the deployment of the antennas to charge electronic shelf labels (ESLs), considering actual regulatory con…
▽ More
Kee** the batteries on the shelf: this is the holy grail for low-cost Internet of Things (IoT) nodes. In this paper we study the potential of radio frequency (RF)-based wireless power transfer implementing coherent beamforming with many antennas to realize this ambitious target. We optimize the deployment of the antennas to charge electronic shelf labels (ESLs), considering actual regulatory constraints. The results confirm the feasibility to create power spots that are sufficient to keep the high density of battery-less devices operational.
△ Less
Submitted 24 January, 2024;
originally announced January 2024.
-
Towards Practical Cell-Free 6G Network Deployments: An Open-Source End-to-End Ray Tracing Simulator
Authors:
William Tärneberg,
Aleksei Fedorov,
Gilles Callebaut,
Liesbet Van der Perre,
Emma Fitzgerald
Abstract:
The advent of 6G wireless communication marks a transformative era in technological connectivity, bringing forth challenges and opportunities alike. This paper unveils an innovative, open-source simulator, meticulously crafted for cell-free 6G wireless networks. This simulator is not just a tool but a gateway to the future, blending cutting-edge channel models with the simulation of both physical…
▽ More
The advent of 6G wireless communication marks a transformative era in technological connectivity, bringing forth challenges and opportunities alike. This paper unveils an innovative, open-source simulator, meticulously crafted for cell-free 6G wireless networks. This simulator is not just a tool but a gateway to the future, blending cutting-edge channel models with the simulation of both physical propagation effects and intricate system-level protocols. It stands at the forefront of technological advancement by integrating LIS and MIMO technologies, harnessing the power of the Unity game engine for efficient ray-tracing and GPU-accelerated computations. The unparalleled flexibility in scenario configuration, coupled with its unique ability to dynamically simulate interactions across network layers, establishes this simulator as an indispensable asset in pioneering &G systems' research and development.
△ Less
Submitted 7 December, 2023;
originally announced January 2024.
-
An Open Dataset Storage Standard for 6G Testbeds
Authors:
Gilles Callebaut,
Michiel Sandra,
Christian Nelson,
Thomas Wilding,
Daan Delabie,
Benjamin J. B. Deutschmann,
William Tärneberg,
Emma Fitzgerald,
Anders J. Johansson,
Liesbet Van der Perre
Abstract:
The emergence of sixth-generation (6G) networks has spurred the development of novel testbeds, including sub-THz networks, cell-free systems, and 6G simulators. To maximize the benefits of these systems, it is crucial to make the generated data publicly available and easily reusable by others. Although data sharing has become a common practice, a lack of standardization hinders data accessibility…
▽ More
The emergence of sixth-generation (6G) networks has spurred the development of novel testbeds, including sub-THz networks, cell-free systems, and 6G simulators. To maximize the benefits of these systems, it is crucial to make the generated data publicly available and easily reusable by others. Although data sharing has become a common practice, a lack of standardization hinders data accessibility and interoperability. In this study, we propose the Dataset Storage Standard (DSS) to address these challenges by facilitating data exchange and enabling convenient processing script creation in a testbed-agnostic manner. DSS supports both experimental and simulated data, allowing researchers to employ the same processing scripts and tools across different datasets. Unlike existing standardization efforts such as SigMF and NI RF Data Recording API, DSS provides a broader scope by accommodating a common definition file for testbeds and is not limited to RF data storage. The dataset format utilizes a hierarchical structure, with a tensor representation for specific experiment scenarios. In summary, DSS offers a comprehensive and flexible framework for enhancing the FAIR principles (Findability, Accessibility, Interoperability, and Reusability) in 6G testbeds, promoting open and efficient data sharing in the research community.
△ Less
Submitted 5 November, 2023;
originally announced November 2023.
-
6G Radio Testbeds: Requirements, Trends, and Approaches
Authors:
Gilles Callebaut,
Liang Liu,
Thomas Eriksson,
Liesbet Van der Perre,
Ove Edfors,
Christian Fager
Abstract:
The proof of the pudding is in the eating - that is why 6G testbeds are essential in the progress towards the next generation of wireless networks. Theoretical research towards 6G wireless networks is proposing advanced technologies to serve new applications and drastically improve the energy performance of the network. Testbeds are indispensable to validate these new technologies under more reali…
▽ More
The proof of the pudding is in the eating - that is why 6G testbeds are essential in the progress towards the next generation of wireless networks. Theoretical research towards 6G wireless networks is proposing advanced technologies to serve new applications and drastically improve the energy performance of the network. Testbeds are indispensable to validate these new technologies under more realistic conditions. This paper clarifies the requirements for 6G radio testbeds, reveals trends, and introduces approaches towards their development.
△ Less
Submitted 13 September, 2023;
originally announced September 2023.
-
Grant-Free Random Access of IoT devices in Massive MIMO with Partial CSI
Authors:
Gilles Callebaut,
François Rottenberg,
Liesbet Van der Perre,
Erik G. Larsson
Abstract:
The number of wireless devices is drastically increasing, resulting in many devices contending for radio resources. In this work, we present an algorithm to detect active devices for unsourced random access, i.e., the devices are uncoordinated. The devices use a unique, but non-orthogonal preamble, known to the network, prior to sending the payload data. They do not employ any carrier sensing tech…
▽ More
The number of wireless devices is drastically increasing, resulting in many devices contending for radio resources. In this work, we present an algorithm to detect active devices for unsourced random access, i.e., the devices are uncoordinated. The devices use a unique, but non-orthogonal preamble, known to the network, prior to sending the payload data. They do not employ any carrier sensing technique and blindly transmit the preamble and data. To detect the active users, we exploit partial channel state information (CSI), which could have been obtained through a previous channel estimate. For static devices, e.g., Internet of Things nodes, it is shown that CSI is less time-variant than assumed in many theoretical works. The presented iterative algorithm uses a maximum likelihood approach to estimate both the activity and a potential phase offset of each known device. The convergence of the proposed algorithm is evaluated. The performance in terms of probability of miss detection and false alarm is assessed for different qualities of partial CSI and different signal-to-noise ratio.
△ Less
Submitted 12 January, 2023;
originally announced January 2023.
-
Multi-RAT IoT -- What's to Gain? An Energy-Monitoring Platform
Authors:
Guus Leenders,
Gilles Callebaut,
Liesbet Van der Perre,
Lieven De Strycker
Abstract:
Multiple LPWANs have been rolled out to support the variety of IoT applications that are crucial to the ongoing digital transformation. These networks vary largely in terms of quality-of-service, throughput and energy-efficiency. To cover all LPWAN use-cases most optimally, multiple networks can be combined into a multiple radio access technology (multi-RAT) solution. In particular environmental m…
▽ More
Multiple LPWANs have been rolled out to support the variety of IoT applications that are crucial to the ongoing digital transformation. These networks vary largely in terms of quality-of-service, throughput and energy-efficiency. To cover all LPWAN use-cases most optimally, multiple networks can be combined into a multiple radio access technology (multi-RAT) solution. In particular environmental monitoring in both smart city and remote landscapes. We present and share such a multi-RAT platform. To derive an accurate profile of the multi-RAT opportunities in various scenarios, in the-field network parameter are monitored. The platform collects per-packet energy-consumption, packet delivery ratio (PDR) and other parameters of LoRaWAN, NB-IoT and Sigfox. Our preliminary measurements demonstrate the validity of using a multi-RAT solution. For example, we illustrate the potential energy savings when adopting multi-RAT in various scenarios.
△ Less
Submitted 15 July, 2022;
originally announced July 2022.
-
The Z3RO Family of Precoders Cancelling Nonlinear Power Amplification Distortion in Large Array Systems
Authors:
François Rottenberg,
Gilles Callebaut,
Liesbet Van der Perre
Abstract:
Large array systems use a massive number of antenna elements and clever precoder designs to achieve an array gain at the user location. These precoders require linear front-ends, and more specifically linear power amplifiers (PAs), to avoid distortion. This reduces the energy efficiency since PAs are most efficient close to saturation, where they generate most nonlinear distortion. Moreover, the u…
▽ More
Large array systems use a massive number of antenna elements and clever precoder designs to achieve an array gain at the user location. These precoders require linear front-ends, and more specifically linear power amplifiers (PAs), to avoid distortion. This reduces the energy efficiency since PAs are most efficient close to saturation, where they generate most nonlinear distortion. Moreover, the use of conventional precoders can induce a coherent combining of distortion at the user locations, degrading the signal quality. In this work, novel linear precoders, simple to compute and to implement, are proposed that allow working close to saturation, while cancelling the third-order nonlinearity of the PA without prior knowledge of the signal statistics and PA model. Their design consists in saturating a single or a few antennas on purpose together with an negative gain with respect to all other antennas to compensate for the overall nonlinear distortion at the user location. The performance gains of the designs are significant for PAs working close to saturation, as compared to maximum ratio transmission (MRT) precoding and perfect per-antenna digital pre-distortion (DPD) compensation.
△ Less
Submitted 10 June, 2022;
originally announced June 2022.
-
Dynamic Federations for 6G Cell-Free Networking: Concepts and Terminology
Authors:
Gilles Callebaut,
William Tärneberg,
Liesbet Van der Perre,
Emma Fitzgerald
Abstract:
Cell-Free networking is one of the prime candidates for 6G networks. Despite being capable of providing the 6G needs, practical limitations and considerations are often neglected in current research. In this work, we introduce the concept of federations to dynamically scale and select the best set of resources, e.g., antennas, computing and data resources, to serve a given application. Next to com…
▽ More
Cell-Free networking is one of the prime candidates for 6G networks. Despite being capable of providing the 6G needs, practical limitations and considerations are often neglected in current research. In this work, we introduce the concept of federations to dynamically scale and select the best set of resources, e.g., antennas, computing and data resources, to serve a given application. Next to communication, 6G systems are expected to provide also wireless powering, positioning and sensing, further increasing the complexity of such systems. Therefore, each federation is self-managing and is distributed over the area in a cell-free manner. Next to the dynamic federations, new accompanying terminology is proposed to design cell-free systems taking into account practical limitations such as time synchronization and distributed processing. We conclude with an illustration with four federations, serving distinct applications, and introduce two new testbeds to study these architectures and concepts.
△ Less
Submitted 5 April, 2022;
originally announced April 2022.
-
IoT with a Soft Touch: A Modular Remote Sensing Platform for STE(A)M Applications
Authors:
Jona Cappelle,
Geoffrey Ottoy,
Sarah Goossens,
Hanne Deprez,
Jarne Van Mulders,
Guus Leenders,
Gilles Callebaut
Abstract:
Besides wide attraction in the industry, IoT is being used to advance STEM and STEAM education across a range of education levels. This work presents a remote sensing platform, named IoT with a Soft Touch, developed to achieve two goals. First, it aims to lower the technicality, stimulating the students to do STE(A)M. Second, the technology is to be used in `softer' applications (e.g., environment…
▽ More
Besides wide attraction in the industry, IoT is being used to advance STEM and STEAM education across a range of education levels. This work presents a remote sensing platform, named IoT with a Soft Touch, developed to achieve two goals. First, it aims to lower the technicality, stimulating the students to do STE(A)M. Second, the technology is to be used in `softer' applications (e.g., environmental and health care), thereby aiming to attract a more diverse set of student profiles. Students can easily build a wireless sensing device, with a specific application in mind. The modular design of the platform and an intuitive graphical configurator tool allows them to tailor the device's functionality to their needs. The sensor's data is transmitted wirelessly with LoRaWAN. The data can be viewed and analyzed on a dashboard, or the raw data can be extracted for further processing, e.g., as part of the school's STE(A)M curriculum. This work elaborates on the low-power and modular design challenges, and how the platform is used in education.
△ Less
Submitted 29 March, 2022;
originally announced April 2022.
-
Techtile -- Open 6G R&D Testbed for Communication, Positioning, Sensing, WPT and Federated Learning
Authors:
Gilles Callebaut,
Jarne Van Mulders,
Geoffrey Ottoy,
Daan Delabie,
Bert Cox,
Nobby Stevens,
Liesbet Van der Perre
Abstract:
New concepts for next-generation wireless systems are being developed. It is expected that these 6G and beyond systems will incorporate more than only communication, but also sensing, positioning, (deep) edge computing, and other services. The discussed measurement facility and approach, named Techtile, is an open, both in design and operation, and unique testbed to evaluate these newly envisioned…
▽ More
New concepts for next-generation wireless systems are being developed. It is expected that these 6G and beyond systems will incorporate more than only communication, but also sensing, positioning, (deep) edge computing, and other services. The discussed measurement facility and approach, named Techtile, is an open, both in design and operation, and unique testbed to evaluate these newly envisioned systems. Techtile is a multi-functional and versatile testbed, providing fine-grained distributed resources for new communication, positioning and sensing technologies. The facility enables experimental research on hyper-connected interactive environments and validation of new algorithms and topologies. The backbone connects 140~resource units equipped with edge computing devices, software-defined radios, sensors, and LED sources. By doing so, different network topologies and local-versus-central computing can be assessed. The introduced diversity of i) the technologies (e.g., RF, acoustics and light), ii) the distributed resources and iii) the interconnectivity allows exploring more degrees and new types of diversity, which can be investigated in this testbed.
△ Less
Submitted 9 February, 2022;
originally announced February 2022.
-
Measurement-Based Validation of Z3RO Precoder to Prevent Nonlinear Amplifier Distortion in Massive MIMO Systems
Authors:
Thomas Feys,
Gilles Callebaut,
Liesbet Van der Perre,
François Rottenberg
Abstract:
In multiple input multiple output (MIMO) systems, precoding allows the base station to spatially focus and multiplex signals towards each user. However, distortion introduced by power amplifier nonlinearities coherently combines in the same spatial directions when using a conventional precoder such as maximum ratio transmission (MRT). This can strongly limit the user performance and moreover creat…
▽ More
In multiple input multiple output (MIMO) systems, precoding allows the base station to spatially focus and multiplex signals towards each user. However, distortion introduced by power amplifier nonlinearities coherently combines in the same spatial directions when using a conventional precoder such as maximum ratio transmission (MRT). This can strongly limit the user performance and moreover create unauthorized out-of-band (OOB) emissions. In order to overcome this problem, the zero third-order distortion (Z3RO) precoder was recently introduced. This precoder constraints the third-order distortion at the user location to be zero. In this work, the performance of the Z3RO precoder is validated based on real-world channel measurement data. The results illustrate the reduction in distortion power at the UE locations: an average distortion reduction of 6.03 dB in the worst-case single-user scenario and 3.54 dB in the 2-user case at a back-off rate of -3 dB.
△ Less
Submitted 16 September, 2022; v1 submitted 1 February, 2022;
originally announced February 2022.
-
Aerial Energy Provisioning for Massive Energy-Constrained IoT by UAVs
Authors:
Jarne Van Mulders,
Guus Leenders,
Gilles Callebaut,
Lieven De Strycker,
Liesbet Van der Perre
Abstract:
Autonomy of devices is a major challenge in many Internet of Things (IoT) applications, in particular when the nodes are deployed remotely or difficult to assess places. In this paper we present an approach to provide energy to these devices by Unmanned Aerial Vehicles (UAVs). Therefore, the two major challenges, finding and charging the node are presented. We propose a model to give the energy co…
▽ More
Autonomy of devices is a major challenge in many Internet of Things (IoT) applications, in particular when the nodes are deployed remotely or difficult to assess places. In this paper we present an approach to provide energy to these devices by Unmanned Aerial Vehicles (UAVs). Therefore, the two major challenges, finding and charging the node are presented. We propose a model to give the energy constrained node an unlimited autonomy by taken the Wireless Power Transfer (WPT) link and battery capacity into account. Selecting the most suitable battery technology allows a reduction in battery capacity and waste. Moreover, an upgrade of existing IoT nodes is feasible with a limited impact on the design and form factor.
△ Less
Submitted 4 January, 2022;
originally announced January 2022.
-
Out-of-Band Distortion in Massive MIMO: What to expect under realistic conditions?
Authors:
Laura Monteyne,
Gilles Callebaut,
Björn Sihlbom,
Liesbet Van der Perre
Abstract:
Massive Multiple Input Multiple Output (MIMO) offers superior capacity for future networks. In the quest for energy efficient implementation of these large array-based trans-mission systems, the power consumption of the Power Amplifiers(PAs) is a main bottleneck. This paper investigates whether it is possible to operate the PAs in their efficient nonlinear region, as the Out-of-Band (OOB) distorti…
▽ More
Massive Multiple Input Multiple Output (MIMO) offers superior capacity for future networks. In the quest for energy efficient implementation of these large array-based trans-mission systems, the power consumption of the Power Amplifiers(PAs) is a main bottleneck. This paper investigates whether it is possible to operate the PAs in their efficient nonlinear region, as the Out-of-Band (OOB) distortion may not get the same array gain as the in-band (IB) signals. We present a framework to simulate the effects under realistic conditions, leveraging on an accurate Ray-Tracing Simulator (RTS). The results show that the often assumed i.i.d. Rayleigh fading channel model results in too optimistic predictions, also in Non Line of Sight (NLoS) multi-path scenarios, regarding the spatial distribution of OOB emissions. We further comment on the consequences in view of current regulatory constraints.
△ Less
Submitted 29 November, 2021;
originally announced November 2021.
-
Array Placement in Distributed Massive MIMO for Power Saving considering Environment Information
Authors:
Yi-Hang Zhu,
Gilles Callebaut,
Liesbet Van der Perre,
François Rottenberg
Abstract:
Distributed massive MIMO (D-mMIMO) has been considered for future networks as it holds the potential to offer superior capacity while enabling energy savings in the network. A D-mMIMO system has multiple arrays. Optimizing the locations of the arrays is essential for the energy efficiency of the system. In existing works, array placement has been optimized mostly based on common channel models, wh…
▽ More
Distributed massive MIMO (D-mMIMO) has been considered for future networks as it holds the potential to offer superior capacity while enabling energy savings in the network. A D-mMIMO system has multiple arrays. Optimizing the locations of the arrays is essential for the energy efficiency of the system. In existing works, array placement has been optimized mostly based on common channel models, which rely on a given statistical distribution and Euclidean distance between user locations and arrays. These models are justified if applied to sufficiently large cells, where the statistical description of the channel is expected to fit its empirical condition. However, with the advent of small cells, this is no longer the case. The channel propagation condition becomes highly environment-specific. This paper investigates array placement optimization with different ways of modeling the propagation conditions taking the environment information (e.g., buildings) into account. We capture the environment information via a graph. Two shortest path-based propagation models are introduced based on the graph. We validate the performance of the models with a ray-tracing simulator considering different signal coverage levels. The simulation results demonstrate that higher energy efficiency is achieved by using the array placements found via the proposed models compared to a Euclidean distance-based propagation model in small cells. The average power saving at 96% signal coverage, for example, reaches more than 5 dB.
△ Less
Submitted 16 November, 2021;
originally announced November 2021.
-
Grant-Free Random Access in Massive MIMO for Static Low-Power IoT Nodes
Authors:
Gilles Callebaut,
Liesbet Van der Perre,
François Rottenberg
Abstract:
Massive MIMO is a promising technology to enable a massive number of Internet of Things nodes to transmit short and sporadic data bursts at low power. In conventional cellular networks, devices use a grant-based random access scheme to initiate communications. This scheme relies on a limited set of orthogonal preambles, which simplify signal processing operations at network access points. However,…
▽ More
Massive MIMO is a promising technology to enable a massive number of Internet of Things nodes to transmit short and sporadic data bursts at low power. In conventional cellular networks, devices use a grant-based random access scheme to initiate communications. This scheme relies on a limited set of orthogonal preambles, which simplify signal processing operations at network access points. However, it is not well suited for Internet of Things (IoT) devices due to: (i) the large protocol overhead, and (ii) the high probability of collision. In contrast to the grant-based scheme, a grant-free approach uses user-specific preambles and has a small overhead, at the expense of more complexity at access points. In this work, a grant-free method is proposed, applicable for both co-located and cell-free deployments. The method has a closed form solution, which results in a significantly low complexity with respect to the state-of-the art. The algorithm exploits the static nature of IoT devices through the use of prior channel state information. With a power budget of 1 mW, 64 antennas are sufficient to support 1000 nodes with 200 simultaneous access requests with a probability of false alarm and miss detection below 10-6 and 10-4, respectively.
△ Less
Submitted 7 July, 2022; v1 submitted 15 October, 2021;
originally announced October 2021.
-
Z3RO Precoder Canceling Nonlinear Power Amplifier Distortion in Large Array Systems
Authors:
François Rottenberg,
Gilles Callebaut,
Liesbet Van der Perre
Abstract:
Large array-based transmission uses the combination of a massive number of antenna elements and clever precoder designs to achieve array gain and spatially multiplex different users. These precoders require linear front-ends, and more specifically linear power amplifiers (PAs). However, this reduces energy efficiency since PAs are most efficient close to saturation, where they generate most nonlin…
▽ More
Large array-based transmission uses the combination of a massive number of antenna elements and clever precoder designs to achieve array gain and spatially multiplex different users. These precoders require linear front-ends, and more specifically linear power amplifiers (PAs). However, this reduces energy efficiency since PAs are most efficient close to saturation, where they generate most nonlinear distortion. Moreover, the use of conventional precoders, such as \gls{mrt}, induces a coherent combining of distortion at the user location, degrading the signal quality. In this work, a linear precoder is proposed that allows working close to saturation while canceling the coherent combining of the third order nonlinear \gls{pa} distortion at the user location. In contrast to other solutions, the zero third-order distortion (Z3RO) precoder does not require prior knowledge of the signal statistics and the PA model. The design consists of saturating a single or a few antennas on purpose together with an opposite phase shift to compensate for the distortion of all other antennas. The resulting array gain penalty becomes negligible as the number of base station antennas grows large.
△ Less
Submitted 15 October, 2021;
originally announced October 2021.
-
Spatial Distribution of Distortion due to Nonlinear Power Amplification in Distributed Massive MIMO
Authors:
François Rottenberg,
Gilles Callebaut,
Liesbet Van der Perre
Abstract:
Due to the nonlinearity of power amplifiers (PAs), the transmit signal is distorted. Previous works have studied the spatial distribution of this distortion for a central massive MIMO array. In this work, we extend the analysis for distributed massive MIMO in a line-of-sight scenario. We show that the distortion is not always uniformly distributed in space. In the single-user case, it coherently c…
▽ More
Due to the nonlinearity of power amplifiers (PAs), the transmit signal is distorted. Previous works have studied the spatial distribution of this distortion for a central massive MIMO array. In this work, we extend the analysis for distributed massive MIMO in a line-of-sight scenario. We show that the distortion is not always uniformly distributed in space. In the single-user case, it coherently combines at the user location. In the few users case, the signals will add up at the user locations plus several others locations. As the number of users increases, it becomes close to uniformly distributed. As a comparison with a central massive MIMO system, having the same total number of antennas, the distortion in distributed massive MIMO is considerably more uniformly distributed in space. Moreover, the potential coherent combining is contained in a zone rather than in generic directions, i.e., in a beamspot. Furthermore, a small-scale fading effect is observed at unintended locations due to the non-coherent combining of the signals. As a result, one can expect that going towards distributed systems allows working closer to saturation, increasing the PA operating efficiency and/or using low-cost PAs.
△ Less
Submitted 18 June, 2021;
originally announced June 2021.
-
Array Placement in Distributed Massive MIMO for power saving considering Radiation Pattern
Authors:
Yi-Hang Zhu,
Laura Monteyne,
Gilles Callebaut,
François Rottenberg,
Liesbet Van der Perre
Abstract:
A distributed antenna system (DAS) consists of several interconnected access points (APs) which are distributed over an area. Each AP has an antenna array. In previous studies, the DAS has been demonstrated great potential to improve capacity and power efficiency compared to a centralized antenna system (CAS) which has all the antennas located in one place. The existing research also has shown tha…
▽ More
A distributed antenna system (DAS) consists of several interconnected access points (APs) which are distributed over an area. Each AP has an antenna array. In previous studies, the DAS has been demonstrated great potential to improve capacity and power efficiency compared to a centralized antenna system (CAS) which has all the antennas located in one place. The existing research also has shown that the placement of the APs is essential for the performance of the DAS. However, most research on AP placement does not take into account realistic constraints. For instance, they assume that APs can be placed at any location in a region or the array radiation pattern of each AP is isotropic. This paper focuses on optimizing the AP placement for the DAS with massive MIMO (D-mMIMO) in order to reduce the transmit power. A square topology for the AP placement is applied, which is reasonable for deploying the D-mMIMO in urban areas while also offering theoretically interesting insights. We investigate the impact of the radiation pattern, signal coherence, and region size on the D-mMIMO's performance. Our results suggest that i) among the three factors, the array radiation pattern of each AP is the most important one in determining the optimal AP placement for the D-mMIMO; ii) the performance of the D-mMIMO is highly impacted by the placement and array radiation pattern of each AP, the D-mMIMO with unoptimized placement may perform even worse than the CAS with massive MIMO (C-mMIMO); iii) with the consideration of patch antennas and the mutual coupling effect, the optimized D-mMIMO can potentially save more than 7 dB transmit power compared to the C-mMIMO. Furthermore, our analytical results also provide an intuition for determining an adequate AP placement for the D-mMIMO in practice.
△ Less
Submitted 13 December, 2021; v1 submitted 10 June, 2021;
originally announced June 2021.
-
Experimental Exploration of Unlicensed Sub-GHz Massive MIMO for Massive Internet-of-Things
Authors:
Gilles Callebaut,
Sara Gunnarsson,
Andrea P. Guevara,
Anders J Johansson,
Liesbet Van der Perre,
Fredrik Tufvesson
Abstract:
Due to the increase of Internet-of-Things (IoT) devices, IoT networks are getting overcrowded. Networks can be extended with more gateways, increasing the number of supported devices. However, as investigated in this work, massive MIMO has the potential to increase the number of simultaneous connections, while also lowering the energy expenditure of these devices. We present a study of the channel…
▽ More
Due to the increase of Internet-of-Things (IoT) devices, IoT networks are getting overcrowded. Networks can be extended with more gateways, increasing the number of supported devices. However, as investigated in this work, massive MIMO has the potential to increase the number of simultaneous connections, while also lowering the energy expenditure of these devices. We present a study of the channel characteristics of massive MIMO in the unlicensed sub-GHz band. The goal is to support IoT applications with strict requirements in terms of number of devices, power consumption, and reliability. The assessment is based on experimental measurements using both a uniform linear and a rectangular array. Our study demonstrates and validates the advantages of deploying massive MIMO gateways to serve IoT nodes. While the results are general, here we specifically focus on static nodes. The array gain and channel hardening effect yield opportunities to lower the transmit-power of IoT nodes while also increasing reliability. The exploration confirms that exploiting large arrays brings great opportunities to connect a massive number of IoT devices by separating the nodes in the spatial domain. In addition, we give an outlook on how static IoT nodes could be scheduled based on partial channel state information.
△ Less
Submitted 26 May, 2021;
originally announced May 2021.
-
A Primer on Techtile: An R&D Testbed for Distributed Communication, Sensing and Positioning
Authors:
Gilles Callebaut,
Jarne Van Mulders,
Geoffrey Ottoy,
Liesbet Van der Perre
Abstract:
The Techtile measurement infrastructure is a multi-functional, versatile testbed for new communication and sensing technologies relying on fine-grained distributed resources. The facility enables experimental research on hyper-connected interactive environments and validation of new wireless connectivity, sensing and positioning solutions. It consists of a data acquisition and processing equipment…
▽ More
The Techtile measurement infrastructure is a multi-functional, versatile testbed for new communication and sensing technologies relying on fine-grained distributed resources. The facility enables experimental research on hyper-connected interactive environments and validation of new wireless connectivity, sensing and positioning solutions. It consists of a data acquisition and processing equipment backbone and a fabric of dispersed edge computing devices, Software-Defined Radios, sensors, and LED sources. These bring intelligence close to the applications and can also collectively function as a massive, distributed resource. Furthermore, the infrastructure allows exploring more degrees and new types of diversity, i.e., scaling up the number of elements, introducing `3D directional diversity' by deploying the distributed elements with different orientations, and `interface diversity' by exploiting multiple technologies and hybrid signals (RF, acoustic, and visible light).
△ Less
Submitted 14 May, 2021;
originally announced May 2021.
-
Multi-RAT for IoT: The Potential in Combining LoRaWAN and NB-IoT
Authors:
Guus Leenders,
Gilles Callebaut,
Geoffrey Ottoy,
Liesbet Van der Perre,
Lieven De Strycker
Abstract:
The broad range of requirements of Internet of Things applications has lead to the development of several dedicated communication technologies, each tailored to meet a specific feature set. A solution combining different wireless technologies in one device, can overcome the disadvantages of any individual technology. The design of such Multiple Radio Access Technology solutions based on the divers…
▽ More
The broad range of requirements of Internet of Things applications has lead to the development of several dedicated communication technologies, each tailored to meet a specific feature set. A solution combining different wireless technologies in one device, can overcome the disadvantages of any individual technology. The design of such Multiple Radio Access Technology solutions based on the diverse characteristics of the technologies offers interesting opportunities. In this work we analyze the potential of combining LoRaWAN and NB-IoT in a Multi-RAT solution for IoT. To that end we evaluate key IoT node requirements in function of payload size and link quality: (1) energy efficiency, (2) coverage, (3) payload size, (4) latency performance, (5) Quality of Service, and (6) cost efficiency. Our theoretical assessment and experimental validation of these IoT features show the merits of a Multi-RAT solution. Notably, energy consumption in use cases with only sporadic large payload requirements, can be improved by a factor of at least 4 with respect to either single-mode technologies. Moreover, latency-critical messages can get delivered on time and coverage can be extended elegantly where needed.
△ Less
Submitted 28 October, 2021; v1 submitted 21 April, 2021;
originally announced April 2021.
-
Massive MIMO goes Sub-GHz: Implementation and Experimental Exploration for LPWANs
Authors:
Gilles Callebaut,
Sara Gunnarsson,
Andrea P. Guevara,
Fredrik Tufvesson,
Sofie Pollin,
Liesbet Van der Perre,
Anders J Johansson
Abstract:
Low-Power Wide-Area Networks operating in the unlicensed bands are being deployed to connect a rapidly growing number of Internet-of-Things devices. While the unlicensed sub-GHz band offers favorable propagation for long-range connections, measurements show that the energy consumption of the nodes is still mostly dominated by the wireless transmission affecting their autonomy. We investigate the p…
▽ More
Low-Power Wide-Area Networks operating in the unlicensed bands are being deployed to connect a rapidly growing number of Internet-of-Things devices. While the unlicensed sub-GHz band offers favorable propagation for long-range connections, measurements show that the energy consumption of the nodes is still mostly dominated by the wireless transmission affecting their autonomy. We investigate the potential benefits of deploying massive MIMO technology to increase system reliability and at the same time support low-energy devices with good coverage at sub-GHz frequencies. The impact of different antenna configurations and propagation conditions is analyzed. Both actual average experienced array gain and channel hardening are examined. The assessment demonstrates the effect of channel hardening as well as the potential benefits of the experienced array gain. These measurements serve as a first assessment of the channel conditions of massive MIMO at sub-GHz frequencies and are, to the best of our knowledge, the first of its kind.
△ Less
Submitted 3 December, 2020;
originally announced December 2020.
-
A Light Signalling Approach to Node Grou** for Massive MIMO IoT Networks
Authors:
Emma Fitzgerald,
Michał Pióro,
Harsh Tataria,
Gilles Callebaut,
Sara Gunnarsson,
Liesbet Van der Perre
Abstract:
Massive MIMO is a leading technology to connect very large numbers of energy constrained nodes, as it offers both extensive spatial multiplexing and large array gain. A challenge resides in partitioning the many nodes into groups that can communicate simultaneously such that the mutual interference is minimized. We here propose node partitioning strategies that do not require full channel state in…
▽ More
Massive MIMO is a leading technology to connect very large numbers of energy constrained nodes, as it offers both extensive spatial multiplexing and large array gain. A challenge resides in partitioning the many nodes into groups that can communicate simultaneously such that the mutual interference is minimized. We here propose node partitioning strategies that do not require full channel state information, but rather are based on nodes' respective directional channel properties. In our considered scenarios, these typically have a time constant that is far larger than the coherence time of the channel. We developed both an optimal and an approximation algorithm to partition users based on directional channel properties, and evaluated them numerically. Our results show that both algorithms, despite using only these directional channel properties, achieve similar performance in terms of the minimum signal-to-interference-plus-noise ratio for any user, compared with a reference method using full channel knowledge. In particular, we demonstrate that grou** nodes with related directional properties is to be avoided. We hence realise a simple partitioning method requiring minimal information to be collected from the nodes, and where this information typically remains stable over a long term, thus promoting their autonomy and energy efficiency.
△ Less
Submitted 16 June, 2022; v1 submitted 11 May, 2020;
originally announced May 2020.
-
LoRa Physical Layer Evaluation for Point-to-Point Links and Coverage Measurements in Diverse Environments
Authors:
Gilles Callebaut,
Guus Leenders,
Chesney Buyle,
Stijn Crul,
Liesbet Van der Perre
Abstract:
This paper focuses on Point-to-Point LoRa connections. We report on coverage measurements performed in three distinct environments, i.e., coastal, forest and urban. Our field experiments demonstrate coverage up to 1 km with antennas at only 1.5 m height in an urban scenario. In free Line-of-Sight (LoS) this coverage is extended to 4 km. Based on these results, we are develo** a path loss model i…
▽ More
This paper focuses on Point-to-Point LoRa connections. We report on coverage measurements performed in three distinct environments, i.e., coastal, forest and urban. Our field experiments demonstrate coverage up to 1 km with antennas at only 1.5 m height in an urban scenario. In free Line-of-Sight (LoS) this coverage is extended to 4 km. Based on these results, we are develo** a path loss model in future work. The developed hardware and software including measurements are open-source.
△ Less
Submitted 18 September, 2019;
originally announced September 2019.
-
Remote IoT devices: sleepy strategies and signal processing to the rescue for a long battery life
Authors:
Gilles Callebaut,
Geoffrey Ottoy,
Guus Leenders,
Bart Thoen,
Lieven De Strycker,
Liesbet Van der Perre
Abstract:
Long range wireless connectivity opens the door for new IoT applications. Low energy consumption is essential to enable long autonomy of devices powered by batteries or even relying on harvested energy. This paper introduces technologies for long-distance interaction with energy-constraint embedded devices. It proposes sleepy strategies for power management for the platform and the transmission. A…
▽ More
Long range wireless connectivity opens the door for new IoT applications. Low energy consumption is essential to enable long autonomy of devices powered by batteries or even relying on harvested energy. This paper introduces technologies for long-distance interaction with energy-constraint embedded devices. It proposes sleepy strategies for power management for the platform and the transmission. Adequate signal processing on the remote modules is demonstrated to play a crucial role to sustain the autonomy of these systems. The presented open-source development platform invites the signal processing community to a smooth validation of new algorithms and applications.
△ Less
Submitted 21 January, 2019;
originally announced January 2019.
-
Cross-layer framework and optimization for efficient use of the energy budget of IoT Nodes
Authors:
Gilles Callebaut,
Geoffrey Ottoy,
Liesbet Van der Perre
Abstract:
Both physical and MAC-layer need to be jointly optimized to maximize the autonomy of IoT devices. Therefore, a cross-layer design is imperative to effectively realize Low Power Wide Area networks (LPWANs). In the present paper, a cross-layer assessment framework including power modeling is proposed. Through this simulation framework, the energy consumption of IoT devices, currently deployed in LoR…
▽ More
Both physical and MAC-layer need to be jointly optimized to maximize the autonomy of IoT devices. Therefore, a cross-layer design is imperative to effectively realize Low Power Wide Area networks (LPWANs). In the present paper, a cross-layer assessment framework including power modeling is proposed. Through this simulation framework, the energy consumption of IoT devices, currently deployed in LoRaWAN networks, is evaluated. We demonstrate that a cross-layer approach significantly improves energy efficiency and overall throughput. Two major contributions are made. First, an open-source LPWAN assessment framework has been conceived. It allows testing and evaluating hypotheses and schemes. Secondly, as a representative case, the LoRaWAN protocol is assessed. The findings indicate how a cross-layer approach can optimize LPWANs in terms of energy efficiency and throughput. For instance, it is shown that the use of larger payloads can reduce up to three times the energy consumption on quasi-static channels yet may bring an energy penalty under adverse dynamic conditions.
△ Less
Submitted 20 March, 2020; v1 submitted 22 June, 2018;
originally announced June 2018.