-
Coexistence of ferroelectric and ferrielectric phases in ultrathin antiferroelectric PbZrO3 thin films
Authors:
Ying Liu,
Ranming Niu,
Roger Uriach,
David Pesquera,
Jose Manuel Caicedo Roque,
Jose Santiso,
Julie M Cairney,
Xiaozhou Liao,
Jordi Arbiol,
Gustau Catalan
Abstract:
Whereas ferroelectricity may vanish in ultra-thin ferroelectric films, it is expected to emerge in ultra-thin anti-ferroelectric films, sparking people's interest in using antiferroelectric materials as an alternative to ferroelectric ones for high-density data storage applications. Lead Zirconate (PbZrO3) is considered the prototype material for antiferroelectricity, and indeed previous studies i…
▽ More
Whereas ferroelectricity may vanish in ultra-thin ferroelectric films, it is expected to emerge in ultra-thin anti-ferroelectric films, sparking people's interest in using antiferroelectric materials as an alternative to ferroelectric ones for high-density data storage applications. Lead Zirconate (PbZrO3) is considered the prototype material for antiferroelectricity, and indeed previous studies indicated that nanoscale PbZrO3 films exhibit ferroelectricity. The understanding of such phenomena from the microstructure aspect is crucial but still lacking. In this study, we fabricated a PbZrO3 film with thicknesses varying from 5 nm to 80 nm. Using Piezoresponse Force Microscopy, we discovered the film displayed a transition from antiferroelectric behaviour in the thicker areas to ferroelectric behaviour in the thinner ones, with a critical thickness between 10 and 15 nm. In this critical thickness range, a 12 nm PZO thin film was chosen for further study using aberration-corrected scanning transmission electron microscopy. The investigation showed that the film comprises both ferroelectric and ferrielectric phases. The ferroelectric phase is characterized by polarisation along the pseudocubic [011] projection direction. The positions of Pb, Zr, and O were determined using the integrated differential phase contrast method. This allowed us to ascertain that the ferroelectric PbZrO3 unit cell is half the size of that in the antiferroelectric phase on the ab plane. The observed unit cell is different from the electric field-induced ferroelectric rhombohedral phases. Additionally, we identified a ferrielectric phase with a unique up-up-zero-zero dipole configuration. The finding is crucial for understanding the performance of ultrathin antiferroelectric thin films and the subsequent design and development of antiferroelectric devices.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Hydrogen Trap** and Embrittlement in Metals -- A Review
Authors:
Y. -S. Chen,
C. Huang,
P. -Y. Liu,
H. -W. Yen,
R. Niu,
P. Burr,
K. L. Moore,
E. Martínez-Pañeda,
A. Atrens,
J. M. Cairney
Abstract:
Hydrogen embrittlement in metals (HE) is a serious challenge for the use of high strength materials in engineering practice and a major barrier to the use of hydrogen for global decarbonization. Here we describe the factors and variables that determine HE susceptibility and provide an overview of the latest understanding of HE mechanisms. We discuss hydrogen uptake and how it can be managed. We su…
▽ More
Hydrogen embrittlement in metals (HE) is a serious challenge for the use of high strength materials in engineering practice and a major barrier to the use of hydrogen for global decarbonization. Here we describe the factors and variables that determine HE susceptibility and provide an overview of the latest understanding of HE mechanisms. We discuss hydrogen uptake and how it can be managed. We summarize hydrogen trap** and the techniques used for its characterization. We also review literature that argues that hydrogen trap** can be used to decrease HE susceptibility. We discuss the future research that is required to advance the understanding of HE and hydrogen trap** and to develop HE-resistant alloys.
△ Less
Submitted 11 April, 2024;
originally announced April 2024.
-
Analysis of water ice in nanoporous copper needles using cryo atom probe tomography
Authors:
Levi Tegg,
Ingrid E. McCarroll,
Se-Ho Kim,
Renelle Dubosq,
Eric V. Woods,
Ayman A. El-Zoka,
Baptiste Gault,
Julie M. Cairney
Abstract:
The application of atom probe tomography (APT) to frozen liquids is limited by difficulties in specimen preparation. Here, we report on the use of nanoporous Cu needles as a physical framework to hold water ice for investigation using APT. Nanoporous Cu needles are prepared by the electropolishing and dealloying of Cu-Mn matchstick precursors. Cryogenic scanning electron microscopy and focused-ion…
▽ More
The application of atom probe tomography (APT) to frozen liquids is limited by difficulties in specimen preparation. Here, we report on the use of nanoporous Cu needles as a physical framework to hold water ice for investigation using APT. Nanoporous Cu needles are prepared by the electropolishing and dealloying of Cu-Mn matchstick precursors. Cryogenic scanning electron microscopy and focused-ion beam milling reveal a hierarchical, dendritic, highly-wettable microstructure. The atom probe mass spectrum is dominated by peaks of Cu+ and H(H2O)n+ up to n <= 3, and the reconstructed volume shows the protrusion of a Cu ligament into an ice-filled pore. The continuous Cu ligament network electrically connects the apex to the cryostage, leading to enhanced electric field at the apex and increased cooling, both of which simplify the mass spectrum compared to previous reports.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
Estimation of the electric field in atom probe tomography experiments using charge state ratios
Authors:
Levi Tegg,
Leigh T. Stephenson,
Julie M. Cairney
Abstract:
(Kingham 1982) provided equations for the probability of observing higher charge states in atom probe tomography (APT) experiments. These "Kingham curves" have wide application in APT, but cannot be analytically transformed to provide the electric field in terms of the easily-measured charge state ratio (CSR). Here we provide a numerical scheme for the calculation of Kingham curves and the variati…
▽ More
(Kingham 1982) provided equations for the probability of observing higher charge states in atom probe tomography (APT) experiments. These "Kingham curves" have wide application in APT, but cannot be analytically transformed to provide the electric field in terms of the easily-measured charge state ratio (CSR). Here we provide a numerical scheme for the calculation of Kingham curves and the variation in electric field with CSR. We find the variation in electric field with CSR is well-described by a simple two or three-parameter equation, and the model is accurate to most elements and charge states. The model is applied to experimental APT data of pure aluminium and a microalloyed steel, demonstrating that the methods described in this work can be easily applied to a variety of APT problems to understand electric field variations.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
Nanoscale Analysis of Frozen Water by Atom Probe Tomography Using Graphene Encapsulation and Cryo-Workflows: A Parametric Study
Authors:
Florant Exertier,
Levi Tegg,
Adam Taylor,
Julie M. Cairney,
**g Fu,
Ross K. W. Marceau
Abstract:
There has been an increasing interest in atom probe tomography (APT) to characterise hydrated and biological materials. A major benefit of APT compared to microscopy techniques more commonly used in biology is its combination of outstanding 3D spatial resolution (~0.2 nm) and mass sensitivity. APT has already been successfully used to characterise biological materials, revealing key structural inf…
▽ More
There has been an increasing interest in atom probe tomography (APT) to characterise hydrated and biological materials. A major benefit of APT compared to microscopy techniques more commonly used in biology is its combination of outstanding 3D spatial resolution (~0.2 nm) and mass sensitivity. APT has already been successfully used to characterise biological materials, revealing key structural information at the atomic scale, however there are many challenges inherent to the analysis of hydrated materials. New preparation protocols, often involving sample preparation and transfer at cryogenic temperature, enable APT analysis of hydrated materials and have the potential to enable 3D atomic scale characterisation of biological materials in the near-native hydrated state. In this study, APT specimens of pure water at the tips of tungsten needles were prepared at room temperature by graphene encapsulation. A parametric study was conducted where samples were transferred at either room temperature or cryo-temperature and analysed by APT by varying parameters such as the flight path and pulsing mode. The differences between the acquisition scenarios are presented along with recommendations for future studies.
△ Less
Submitted 10 November, 2023;
originally announced November 2023.
-
Translational boundaries as incipient ferrielectric domains in antiferroelectric PbZrO3
Authors:
Ying Liu,
Ranming Niu,
Andrzej Majchrowski,
Krystian Roleder,
Julie M. Cairney,
Jordi Arbiol,
Gustau Catalan
Abstract:
In the archetypal antiferroelectric PbZrO3, antiparallel electric dipoles cancel each other, resulting in zero spontaneous polarisation at the macroscopic level. Yet in actual hysteresis loops, the cancellation is rarely perfect and some remnant polarization is often observed, suggesting the metastability of polar phases in this material. In this work, using aberration-corrected scanning transmiss…
▽ More
In the archetypal antiferroelectric PbZrO3, antiparallel electric dipoles cancel each other, resulting in zero spontaneous polarisation at the macroscopic level. Yet in actual hysteresis loops, the cancellation is rarely perfect and some remnant polarization is often observed, suggesting the metastability of polar phases in this material. In this work, using aberration-corrected scanning transmission electron microscopy methods on a PbZrO3 single crystal, we uncover the coexistence of the common antiferroelectric phase and a ferrielectric phase featuring an electric dipole pattern of "up down up". This dipole arrangement, predicted by Aramberri et al. (2021) to be the ground state of PbZrO3 at 0K, appears at room temperature in the form of translational boundaries that aggregate to form wider stripe domains of the polar phase embedded within the antiferroelectric matrix.
△ Less
Submitted 16 November, 2022;
originally announced November 2022.
-
Versatile Direct Writing of Dopants in a Solid State Host Through Recoil Implantation
Authors:
Johannes E. Fröch,
Alan Bahm,
Mehran Kianinia,
Mu Zhao,
Vijay Bhatia,
Sejeong Kim,
Julie M. Cairney,
Weibo Gao,
Carlo Bradac,
Igor Aharonovich,
Milos Toth
Abstract:
Modifying material properties at the nanoscale is crucially important for devices in nanoelectronics, nanophotonics and quantum information. Optically active defects in wide band gap materials, for instance, are vital constituents for the realisation of quantum technologies. Yet, the introduction of atomic defects through direct ion implantation remains a fundamental challenge. Herein, we establis…
▽ More
Modifying material properties at the nanoscale is crucially important for devices in nanoelectronics, nanophotonics and quantum information. Optically active defects in wide band gap materials, for instance, are vital constituents for the realisation of quantum technologies. Yet, the introduction of atomic defects through direct ion implantation remains a fundamental challenge. Herein, we establish a universal method for material do** by exploiting one of the most fundamental principles of physics - momentum transfer. As a proof of concept, we direct-write arrays of emitters into diamond via momentum transfer from a Xe+ focused ion beam (FIB) to thin films of the group IV dopants pre-deposited onto a diamond surface. We conclusively show that the technique, which we term knock-on do**, can yield ultra-shallow dopant profiles localized to the top 5 nm of the target surface, and use it to achieve sub-50 nm lateral resolution. The knock-on do** method is cost-effective, yet very versatile, powerful and universally suitable for applications such as electronic and magnetic do** of atomically thin materials and engineering of near-surface states of semiconductor devices.
△ Less
Submitted 8 October, 2020; v1 submitted 20 January, 2020;
originally announced January 2020.
-
A gas-phase reaction cell for modern Atom Probe systems
Authors:
Daniel Haley,
Ingrid McCarrol,
Paul. A. J. Bagot,
Julie. M. Cairney,
Michael P. Moody
Abstract:
In this work, we demonstrate a new system for the examination of gas interactions with surfaces via Atom Probe Tomography. This system provides the capability to examine the surface and subsurface interactions of gases with a wide range of specimens, as well as a selection of input gas types. This system has been primarily developed to aid the investigation of hydrogen interactions with metallurgi…
▽ More
In this work, we demonstrate a new system for the examination of gas interactions with surfaces via Atom Probe Tomography. This system provides the capability to examine the surface and subsurface interactions of gases with a wide range of specimens, as well as a selection of input gas types. This system has been primarily developed to aid the investigation of hydrogen interactions with metallurgical samples, to better understand the phenomenon of hydrogen embrittlement. In its current form, it is able to operate at pressures from 10^-6 to 1000 mbar (abs), can operate using a variety of gasses, and is equipped with heating and cryogenic quenching capabilities. We use this system to examine the interaction of hydrogen with Pd, as well as the interaction of water vapour and oxygen in Mg samples.
△ Less
Submitted 17 January, 2019;
originally announced January 2019.
-
Microstructural evolution during ageing of Al-Cu-Li-x alloys
Authors:
Vicente Araullo-Peters,
Baptiste Gault,
Frederic De Geuser,
Alexis Deschamps,
Julie M. Cairney
Abstract:
In this study atom probe tomography was used to investigate the microstructure of AA2198 (Al-1.35Cu-3.55Li-0.29Mg-0.08Ag) over a range of ageing conditions to examine the evolution of phases in the alloy, in particular aiming to reveal the nucleation mechanism of the strengthening T1 phase, which has been under debate for decades. T1 precursor phases were observed from early ageing, a significant…
▽ More
In this study atom probe tomography was used to investigate the microstructure of AA2198 (Al-1.35Cu-3.55Li-0.29Mg-0.08Ag) over a range of ageing conditions to examine the evolution of phases in the alloy, in particular aiming to reveal the nucleation mechanism of the strengthening T1 phase, which has been under debate for decades. T1 precursor phases were observed from early ageing, a significant number of which were connected to solute-enriched dislocations. Ag and Mg segregation to T1 interfaces was convincingly observed when the plates were oriented perpendicular to the probing direction, which is the condition under which the spatial resolution of the atom probe data is highest.
△ Less
Submitted 10 October, 2015;
originally announced October 2015.
-
Dynamic reconstruction for atom probe tomography
Authors:
Baptiste Gault,
Shyeh T**g Loi,
Vicente J. Araullo-Peters,
Leigh T. Stephenson,
Michael P. Moody,
Sachin L. Shrestha,
Ross K. W. Marceau,
Lan Yao,
Julie M. Cairney,
Simon P. Ringer
Abstract:
Progress in the reconstruction for atom probe tomography has been limited since the first implementation of the protocol proposed by Bas et al. in 1995. This approach, and those subsequently developed, assume that the geometric parameters used to build the three-dimensional atom map are constant over the course of an analysis. Here, we test this assumption within the analyses of low-alloyed materi…
▽ More
Progress in the reconstruction for atom probe tomography has been limited since the first implementation of the protocol proposed by Bas et al. in 1995. This approach, and those subsequently developed, assume that the geometric parameters used to build the three-dimensional atom map are constant over the course of an analysis. Here, we test this assumption within the analyses of low-alloyed materials. By building upon methods recently proposed to measure the tomographic reconstruction parameters, we demonstrate that this assumption can introduce significant limitations in the accuracy of the analysis. Moreover, we propose a strategy to alleviate this problem through the implementation of a new reconstruction algorithm that dynamically accommodates variations in the tomographic reconstruction parameters.
△ Less
Submitted 9 October, 2015;
originally announced October 2015.