Showing 1–50 of 54 results for author: Cahill, G

Thermal contribution to current-driven antiferromagnetic-order switching

Authors: Myoung-Woo Yoo, Virginia O. Lorenz, Axel Hoffmann, David G. Cahill

Abstract: In information technology devices, current-driven state switching is crucial in various disciplines including spintronics, where the contribution of heating to the switching mechanism plays an inevitable role. Recently, current-driven antiferromagnetic order switching has attracted considerable attention due to its implications for next-generation spintronic devices. Although the switching mechani… ▽ More In information technology devices, current-driven state switching is crucial in various disciplines including spintronics, where the contribution of heating to the switching mechanism plays an inevitable role. Recently, current-driven antiferromagnetic order switching has attracted considerable attention due to its implications for next-generation spintronic devices. Although the switching mechanisms can be explained by spin dynamics induced by spin torques, some reports have claimed that demagnetization above the Neel temperature due to Joule heating is critical for switching. Here we present a systematic method and an analytical model to quantify the thermal contribution due to Joule heating in micro-electronic devices, focusing on current-driven octupole switching in the non-collinear antiferromagnet, Mn3Sn. The results consistently show that the critical temperature for switching remains relatively constant above the Neel temperature, while the threshold current density depends on the choice of substrate and the base temperature. In addition, we provide an analytical model to calculate the Joule-heating temperature which quantitatively explains our experimental results. From numerical calculations, we illustrate the reconfiguration of magnetic orders during cooling from a demagnetized state of polycrystalline Mn3Sn. This work not only provides deeper insights into magnetization switching in antiferromagnets, but also a general guideline for evaluating the Joule-heating temperature excursions in micro-electronic devices. △ Less

Submitted 19 May, 2024; originally announced May 2024.

Comments: Main: 9 pages, 6 figures, Supplementary Material: 9 pages, 8 figures

Improving nuclear magnetic resonance and electron spin resonance thermometry with size reduction of superparamagnetic iron oxide nanoparticles

Authors: Pei-Yun Lin, Darshan Chalise, David G. Cahill

Abstract: Thermometry based on magnetic resonance has been extensively studied due to its important application in biomedical imaging. In our previous work, we showed that the spin-spin relaxation time (T2) of nuclear magnetic resonance (NMR) in water is a highly sensitive thermometer as T2 scales with the highly temperature-sensitive self-diffusion constant of water. In this work, in addition to temperatur… ▽ More Thermometry based on magnetic resonance has been extensively studied due to its important application in biomedical imaging. In our previous work, we showed that the spin-spin relaxation time (T2) of nuclear magnetic resonance (NMR) in water is a highly sensitive thermometer as T2 scales with the highly temperature-sensitive self-diffusion constant of water. In this work, in addition to temperature dependent self-diffusion constant of a fluid, we utilize the temperature dependent magnetization of 4 nm SPIONs to improve T2 sensitivity (4.96) by 1.4 times over self-diffusion (3.48) alone in hexane between 248 K and 333 K. To extend the application of NMR T2 thermometry to engineering systems, we also investigate the temperature dependence of T2 in mineral oil (Thermo Scientific, J62592), which exhibits remarkably high sensitivity (11.62) between 273 K and 353 K. This result implies that applications of NMR T2 thermometry in heat transfer fluids are promising. NMR thermometry, however, is generally not applicable to solids. Therefore, we also evaluate the potential of electron spin resonance (ESR) thermometry with SPIONs in solids between 100 K and 290 K, for potential temperature monitoring in biomedical and engineering applications. The size and concentration effects on ESR signals are studied systematically, and our results show that the temperature dependent linewidth follows a T^-2 law for 4 nm SPIONs, while the concentration of SPIONs has no impact on the temperature dependence of the ESR linewidth. The linewidth at room temperature at 9.4 GHz is 10.5 mT. Combining our NMR and ESR results, we find that to obtain higher temperature sensitivity in a magnetic resonance technique using SPIONs, SPION with a small magnetic moment, i.e., a small volume and reduced magnetization, are beneficial. △ Less

Submitted 19 April, 2024; originally announced April 2024.

Comments: 45 pages, 16 figures

Temperature-dependent optical and magneto-optical spectra of ferromagnetic BCC Fe

Authors: Kisung Kang, David G. Cahill, André Schleife

Abstract: Optical and magneto-optical properties of magnetic materials have been widely exploited to characterize magnetic structures and phenomena, however, their temperature dependence is not well understood. This study implements the supercell approach with thermal lattice and magnetic disorders to obtain optical and magneto-optical spectra at finite temperatures based on Williams-Lax theory. Our results… ▽ More Optical and magneto-optical properties of magnetic materials have been widely exploited to characterize magnetic structures and phenomena, however, their temperature dependence is not well understood. This study implements the supercell approach with thermal lattice and magnetic disorders to obtain optical and magneto-optical spectra at finite temperatures based on Williams-Lax theory. Our results show that large optical spectrum signals are generated at photon energies below 1 eV, originating from the phonon- and magnon-assisted intraband transitions as lattice and magnetic temperatures increase. In addition, the prominent peak near 2.7 eV is redshifted proportionally to magnetic temperature but depends much less on lattice temperature. By analyzing unfolded bands, we show that the reduction of exchange splitting due to the thermal demagnetization causes this redshift. Our unfolded electronic band structure with magnetic disorder shows band kinks, which are characteristic evidence of the coupling between electrons and magnetic excitations. First-order magneto-optical spectra at finite temperature are also predicted, but due to their small magnitude suffer more from sampling errors. We discuss the effect of zero-point vibrations and the connection of these simulations to the Drude model for intraband transitions. △ Less

Submitted 4 April, 2024; originally announced April 2024.

Comments: 15 pages, 8 figrues

Ultrahigh Thermal Conductivity of Cubic Boron Arsenide with an Unexpectedly Strong Temperature Dependence

Authors: Songrui Hou, Fengjiao Pan, ** Shi, Zahra Ebrahim Nataj, Fariborz Kargar, Alexander A. Balandin, David G. Cahill, Chen Li, Zhifeng Ren, Richard B. Wilson

Abstract: Materials with high thermal conductivity are needed to conduct heat away from hot spots in power electronics and optoelectronic devices. Cubic boron arsenide (c-BAs) has a high thermal conductivity due to its special phonon dispersion relation. Previous experimental studies of c-BAs report a room-temperature thermal conductivity between 1000 and 1300 watts per meter-kelvin. We synthesized high pur… ▽ More Materials with high thermal conductivity are needed to conduct heat away from hot spots in power electronics and optoelectronic devices. Cubic boron arsenide (c-BAs) has a high thermal conductivity due to its special phonon dispersion relation. Previous experimental studies of c-BAs report a room-temperature thermal conductivity between 1000 and 1300 watts per meter-kelvin. We synthesized high purity c-BAs single crystals with room-temperature thermal conductivity of 1500 watts per meter-kelvin. We observed its thermal conductivity to be proportional to the inverse square of temperature between 300 and 600 kelvin, a stronger dependence than predicted by state-of-the-art theory. △ Less

Submitted 31 January, 2024; originally announced February 2024.

Comments: 14 pages, 3 figures

Temperature dependence of 7Li NMR relaxation rates in Li3InCl6, Li3YCl6, Li1.48Al0.48Ge1.52(PO4)3 and LiPS5Cl

Authors: Darshan Chalise, Carlos Juarez-Yescas, Beniamin Zahiri, Paul V. Braun, David G. Cahill

Abstract: Inorganic solid-state battery electrolytes show high ionic conductivities and enable the fabrication of all solid-state batteries. In this work, we present the temperature dependence of spin-lattice relaxation time (T1), spin-spin relaxation time (T2), and resonance linewidth of the 7Li nuclear magnetic resonance (NMR) for four solid-state battery electrolytes (Li3InCl6 (LIC), Li3YCl6 (LYC), Li1.4… ▽ More Inorganic solid-state battery electrolytes show high ionic conductivities and enable the fabrication of all solid-state batteries. In this work, we present the temperature dependence of spin-lattice relaxation time (T1), spin-spin relaxation time (T2), and resonance linewidth of the 7Li nuclear magnetic resonance (NMR) for four solid-state battery electrolytes (Li3InCl6 (LIC), Li3YCl6 (LYC), Li1.48Al0.48Ge1.52(PO4)3 (LAGP) and LiPS5Cl (LPSC)) from 173 K to 403 K at a 7Li resonance frequency of 233 MHz, and from 253 K to 353 K at a 7Li resonance frequency of 291 MHz. Additionally, we measured the spin-lattice relaxation rates at an effective 7Li resonance frequency of 133 kHz using a spin-locking pulse sequence in the temperature range of 253 K to 353 K. In LPSC, the 7Li NMR relaxation is consistent with the Bloembergen-Pound-Purcell (BPP) theory of NMR relaxation of dipolar nuclei. In LIC, LYC and LAGP, the BPP theory does not describe the NMR relaxation rates for the temperature range and frequencies of our measurements. The presented NMR relaxation data assists in providing a complete picture of Li diffusion in the four solid-state battery electrolytes. △ Less

Submitted 22 March, 2023; originally announced March 2023.

Anisotropic thermal conductivity of high bandwidth memory

Authors: Darshan Chalise, David G. Cahill

Abstract: Thermal management of integrated circuits (ICs) is important to prevent thermal hotspots which are the leading cause of IC failure. Thermal management is even more critical in 3D integrated circuits (3D ICs) as the prevalence of thermal hotspots is expected to increase due to the presence of polymers and solder materials that are of low thermal conductivity. Understanding how thermal conductivity… ▽ More Thermal management of integrated circuits (ICs) is important to prevent thermal hotspots which are the leading cause of IC failure. Thermal management is even more critical in 3D integrated circuits (3D ICs) as the prevalence of thermal hotspots is expected to increase due to the presence of polymers and solder materials that are of low thermal conductivity. Understanding how thermal conductivity is affected by the presence of these materials is required for develo** thermally aware IC design. The 3ω method can measure thermal conductivities spanning several orders of magnitude and is appropriate for measuring the thermal properties of layered structures such as 3D ICs. In this work, we use the 3ω method with planar and cylindrical heat flow geometries to determine thermal conductivities of the memory layers and layers with polymer and solder bumps in High Bandwidth Memory (HBM) Random Access Memory (RAM). We determine the in-plane thermal conductivity of the memory layers in HBM as 140 W/m-K, while the through-plane conductivity of the polymer/solder bump layer is 2 W/m-K. Combining the results of x-ray tomography and the 3-omega measurements, we estimate that the effective in-plane thermal conductivity of the overall HBM device is 100 W/m-K while the effective through-plane thermal conductivity is 7 W/m-K. Our results show that the presence of polymers and solder metals results in a significantly decreased through-plane thermal conductivity of a 3D IC compared to a single IC die. Improvement in the thermal performance of 3D ICs will require improvement in the thermal conductivity or the increased contact area of the solder metals used in 3D ICs. △ Less

Submitted 27 April, 2023; v1 submitted 12 March, 2023; originally announced March 2023.

Comments: The x-ray tomography data was assigned a wrong scale bar. Consequently, the lengths of structures used in the analysis was wrong

Unsupervised Domain Adaptation for Automated Knee Osteoarthritis Phenotype Classification

Authors: Junru Zhong, Yongcheng Yao, Donal G. Cahill, Fan Xiao, Siyue Li, Jack Lee, Kevin Ki-Wai Ho, Michael Tim-Yun Ong, James F. Griffith, Weitian Chen

Abstract: Purpose: The aim of this study was to demonstrate the utility of unsupervised domain adaptation (UDA) in automated knee osteoarthritis (OA) phenotype classification using a small dataset (n=50). Materials and Methods: For this retrospective study, we collected 3,166 three-dimensional (3D) double-echo steady-state magnetic resonance (MR) images from the Osteoarthritis Initiative dataset and 50 3D t… ▽ More Purpose: The aim of this study was to demonstrate the utility of unsupervised domain adaptation (UDA) in automated knee osteoarthritis (OA) phenotype classification using a small dataset (n=50). Materials and Methods: For this retrospective study, we collected 3,166 three-dimensional (3D) double-echo steady-state magnetic resonance (MR) images from the Osteoarthritis Initiative dataset and 50 3D turbo/fast spin-echo MR images from our institute (in 2020 and 2021) as the source and target datasets, respectively. For each patient, the degree of knee OA was initially graded according to the MRI Osteoarthritis Knee Score (MOAKS) before being converted to binary OA phenotype labels. The proposed UDA pipeline included (a) pre-processing, which involved automatic segmentation and region-of-interest crop**; (b) source classifier training, which involved pre-training phenotype classifiers on the source dataset; (c) target encoder adaptation, which involved unsupervised adaption of the source encoder to the target encoder and (d) target classifier validation, which involved statistical analysis of the target classification performance evaluated by the area under the receiver operating characteristic curve (AUROC), sensitivity, specificity and accuracy. Additionally, a classifier was trained without UDA for comparison. Results: The target classifier trained with UDA achieved improved AUROC, sensitivity, specificity and accuracy for both knee OA phenotypes compared with the classifier trained without UDA. Conclusion: The proposed UDA approach improves the performance of automated knee OA phenotype classification for small target datasets by utilising a large, high-quality source dataset for training. The results successfully demonstrated the advantages of the UDA approach in classification on small datasets. △ Less

Submitted 13 December, 2022; originally announced December 2022.

Comments: Junru Zhong and Yongcheng Yao share the same contribution. 17 pages, 4 figures, 4 tables

Simultaneous map** of temperature and hydration in proton exchange membrane of fuel cells using magnetic resonance imaging

Authors: Darshan Chalise, Shreyan Majumdar, David G. Cahill

Abstract: The efficiency of a proton exchange membrane (PEM) fuel cell depends on the mobility of protons in the PEM, which is determined by the hydration and temperature of the membrane. While optical techniques or neutron or x-ray scattering techniques may be used to study the inhomogeneities in hydration and temperature in PEMs, these techniques cannot provide 3 dimensional spatial resolution in measurin… ▽ More The efficiency of a proton exchange membrane (PEM) fuel cell depends on the mobility of protons in the PEM, which is determined by the hydration and temperature of the membrane. While optical techniques or neutron or x-ray scattering techniques may be used to study the inhomogeneities in hydration and temperature in PEMs, these techniques cannot provide 3 dimensional spatial resolution in measuring layered PEMs. Due to their ability to provide non-invasive 3D images, spin-lattice relaxation time (T1) and spin-spin relaxation time (T2) contrast magnetic resonance imaging (MRI) of protons in PEMs have been suggested as methods to map hydration in the fuel cells. We show that while T1 and T2 imaging may be used to map hydration in PEMs under isothermal conditions, proton T1 and T2 are also a function of temperature. For PEM fuel cells, where current densities are large and thermal gradients are expected, T1 and T2 relaxation times cannot be used for map** hydration. The chemical shift of the mobile proton is, however, a strong function of hydration but not temperature. Therefore, chemical shift imaging (CSI) can be used to map hydration. The diffusion constant of the mobile proton, which can be determined by pulsed field gradient NMR, increases with both temperature and hydration. Therefore, CSI followed by imaging of diffusion via pulsed field gradients can be used for separate map**s of hydration and temperature in PEMs. Here, we demonstrate a 16 x 16 pixel MRI map** of hydration and temperature in Nafion PEMs with a spatial resolution of 1 mm x 1 mm, a total scan time of 3 minutes, a temperature resolution of 6 K, and an uncertainty in hydration within 15%. The demonstrated map** can be generalized for imaging exchange membranes of any fuel cells or flow batteries. △ Less

Submitted 7 January, 2023; v1 submitted 5 December, 2022; originally announced December 2022.

Ionic Peltier Effect in Li-Ion Electrolytes

Authors: Zhe Cheng, Yu-Ju Huang, Beniamin Zahiri, Patrick Kwon, Paul V. Braun, David G. Cahill

Abstract: The coupled transport of charge and heat provide fundamental insights into the microscopic thermodynamics and kinetics of materials. We describe a sensitive ac differential resistance bridge that enables measurements of the temperature difference on two sides of a coin cell with a resolution of better than 10 uK. We use this temperature difference metrology to determine the ionic Peltier coefficie… ▽ More The coupled transport of charge and heat provide fundamental insights into the microscopic thermodynamics and kinetics of materials. We describe a sensitive ac differential resistance bridge that enables measurements of the temperature difference on two sides of a coin cell with a resolution of better than 10 uK. We use this temperature difference metrology to determine the ionic Peltier coefficients of symmetric Li-ion electrochemical cells as a function of Li salt concentration, solvent composition, electrode material, and temperature. The Peltier coefficients Π are negative, i.e., heat flows in the direction opposite to the drift of Li ions in the applied electric field, large, 30 kJ mol-1, and increase with increasing temperature at T > 300 K. The Peltier coefficient is approximately constant on time scales that span the characteristic time for mass diffusion across the thickness of the electrolyte, suggesting that heat of transport plays a minor role in comparison to the changes in partial molar entropy of Li at the interface between the electrode and electrolyte. Our work demonstrates a new platform for studying the non-equilibrium thermodynamics of electrochemical cells and provides a window into the transport properties of electrochemical materials through measurements of temperature differences and heat currents that complement traditional measurements of voltages and charge currents. △ Less

Submitted 12 December, 2023; v1 submitted 27 November, 2022; originally announced November 2022.

Angstrom-Scale Imaging of Magnetization in Antiferromagnetic Fe$_2$As via 4D-STEM

Authors: Kayla X. Nguyen, Jeffrey Huang, Manohar H. Karigerasi, Kisung Kang, David G. Cahill, Jian-Min Zuo, André Schleife, Daniel P. Shoemaker, Pinshane Y. Huang

Abstract: We demonstrate a combination of computational tools and experimental 4D-STEM methods to image the local magnetic moment in antiferromagnetic Fe$_2$As with 6 angstrom spatial resolution. Our techniques utilize magnetic diffraction peaks, common in antiferromagnetic materials, to create imaging modes that directly visualize the magnetic lattice. Using this approach, we show that center-of-mass analy… ▽ More We demonstrate a combination of computational tools and experimental 4D-STEM methods to image the local magnetic moment in antiferromagnetic Fe$_2$As with 6 angstrom spatial resolution. Our techniques utilize magnetic diffraction peaks, common in antiferromagnetic materials, to create imaging modes that directly visualize the magnetic lattice. Using this approach, we show that center-of-mass analysis can determine the local magnetization component in the plane perpendicular to the path of the electron beam. Moreover, we develop Magnstem, a quantum mechanical electron scattering simulation code, to model electron scattering of an angstrom-scale probe from magnetic materials. Using these tools, we identify optimal experimental conditions for separating weak magnetic signals from the much stronger interactions of an angstrom-scale probe with electrostatic potentials. Our techniques should be useful for characterizing the local magnetic order in systems such in thin films, interfaces, and domain boundaries of antiferromagnetic materials, which are difficult to probe with existing methods. △ Less

Submitted 18 November, 2022; originally announced November 2022.

Comments: 18 pages, 5 figures, plus Supplementary Material

Electron paramagnetic resonance of n-type silicon and germanium for applications in 3D thermometry

Authors: Darshan Chalise, David G. Cahill

Abstract: While several 2D thermometry techniques exist, there is a lack of 3D thermometry techniques that work for wide range of materials and offer good resolution in time, space and temperature. X-ray diffraction (XRD) and nuclear magnetic resonance (NMR) imaging can provide 3D temperature information. However, XRD is typically limited to crystalline materials while NMR is largely limited to liquids wher… ▽ More While several 2D thermometry techniques exist, there is a lack of 3D thermometry techniques that work for wide range of materials and offer good resolution in time, space and temperature. X-ray diffraction (XRD) and nuclear magnetic resonance (NMR) imaging can provide 3D temperature information. However, XRD is typically limited to crystalline materials while NMR is largely limited to liquids where the resonance lines are narrow. We investigate electron paramagnetic resonance (EPR) of n-type silicon and germanium for 3D thermometry. While in germanium the EPR linewidths are too broad, EPR linewidths in silicon are reasonably narrow and exhibit a strong temperature dependence. The temperature dependence of the spin-lattice relaxation rate (1/T1) of conduction electrons in n-type Si for low dopant concentrations follows a T^3 law due to phonon broadening. For heavily doped Si, which is desirable for good signal to noise ratio (SNR) for application in thermometry, impurity scattering is expected to decrease the temperature dependence of 1/T1. Our results show, in heavily doped n-type Si, spin-lattice relaxation induced by impurity scattering does not drastically decrease the temperature dependence of EPR linewidths. In P-doped Si with donor concentration of 7 x 10^18 /cm^3, the EPR linewidth has a T^(5/2) temperature dependence; the temperature dependence decreases to T^(3/2) when the donor concentration is 7 x 10^19 /cm^3. While the temperature dependence of linewidth decreases for heavier do**, EPR linewidth is still a sensitive thermometer. We define a figure of merit for SNR for thermometry from EPR linewidths of n-type Si and observe that increasing the do** results in a better SNR. Using effective medium theory, we show that EPR linewidth can be a sensitive thermometer for application in 3D thermometry with systems embedding microparticles of heavily doped n-type Si. △ Less

Submitted 17 January, 2023; v1 submitted 14 November, 2022; originally announced November 2022.

Frequency-domain probe beam deflection method for measurement of thermal conductivity of materials on micron length scale

Authors: **chi Sun, Guangxin Lv, David G. Cahill

Abstract: Time-domain thermoreflectance (TDTR) and frequency-domain thermoreflectance (FDTR) have been widely used for non-contact measurement of anisotropic thermal conductivity of materials with high spatial resolution. However, the requirement of high thermoreflectance coefficient restricts the choice of metal coating and laser wavelength. The accuracy of the measurement is often limited by the high sens… ▽ More Time-domain thermoreflectance (TDTR) and frequency-domain thermoreflectance (FDTR) have been widely used for non-contact measurement of anisotropic thermal conductivity of materials with high spatial resolution. However, the requirement of high thermoreflectance coefficient restricts the choice of metal coating and laser wavelength. The accuracy of the measurement is often limited by the high sensitivity to the radii of the laser beams. We describe an alternative frequency-domain pump-probe technique based on probe beam deflection. The beam deflection is primarily caused by thermoelastic deformation of the sample surface with a magnitude determined by the thermal expansion coefficient of the bulk material to measure. We derive an analytical solution to the coupled elasticity and heat diffusion equations for periodic heating of a multilayer sample with anisotropic elastic constants, thermal conductivity, and thermal expansion coefficients. In most cases, a simplified model can reliably describe the frequency dependence of the beam deflection signal without knowledge of the elastic constants and thermal expansion coefficients of the material. The magnitude of the probe beam deflection signal is larger than the maximum magnitude achievable by thermoreflectance detection of surface temperatures if the thermal expansion coefficient is greater than 5x10^(-6) /K. The sensitivity to laser beam radii is suppressed when a larger beam offset is used. We find nearly perfect matching of the measured signal and model prediction, and measure thermal conductivities within 6% of accepted values for materials spanning the range of polymers to gold, 0.1 - 300 W/(m K). △ Less

Submitted 20 September, 2022; v1 submitted 17 September, 2022; originally announced September 2022.

Topological Metal MoP Nanowire for Interconnect

Authors: Hyeuk ** Han, Sushant Kumar, Xiaoyang Ji, James L. Hart, Gangtae **, David J. Hynek, Quynh P. Sam, Vicky Hasse, Claudia Felser, David G. Cahill, Ravishankar Sundararaman, Judy J. Cha

Abstract: The increasing resistance of Cu interconnects for decreasing dimensions is a major challenge in continued downscaling of integrated circuits beyond the 7-nm technology node as it leads to unacceptable signal delays and power consumption in computing. The resistivity of Cu increases due to electron scattering at surfaces and grain boundaries of the interconnects at the nanoscale. Topological semime… ▽ More The increasing resistance of Cu interconnects for decreasing dimensions is a major challenge in continued downscaling of integrated circuits beyond the 7-nm technology node as it leads to unacceptable signal delays and power consumption in computing. The resistivity of Cu increases due to electron scattering at surfaces and grain boundaries of the interconnects at the nanoscale. Topological semimetals, owing to their topologically protected surface states and suppressed electron backscattering, are promising material candidates to potentially replace current Cu interconnects as low-resistance interconnects. Here, we report the attractive resistivity scaling of topological metal MoP nanowires and show that the resistivity values are comparable to those of Cu interconnects below 500 nm$^2$ cross-section areas. More importantly, we demonstrate that the dimensional scaling of MoP nanowires, in terms of line resistance versus total cross-sectional area, is superior to those of effective Cu and barrier-less Ru interconnects, suggesting MoP is an attractive solution to the current scaling challenge of Cu interconnects. △ Less

Submitted 4 August, 2022; originally announced August 2022.

Comments: 4 figures

High Thermal Conductivity in Wafer Scale Cubic Silicon Carbide Crystals

Authors: Zhe Cheng, Jianbo Liang, Keisuke Kawamura, Hidetoshi Asamura, Hiroki Uratani, Samuel Graham, Yutaka Ohno, Yasuyoshi Nagai, Naoteru Shigekawa, David G. Cahill

Abstract: High thermal conductivity electronic materials are critical components for high-performance electronic and photonic devices as either active functional materials or thermal management materials. We report an isotropic high thermal conductivity over 500 W m-1K-1 at room temperature in high-quality wafer-scale cubic silicon carbide (3C-SiC) crystals, which is the second highest among large crystals… ▽ More High thermal conductivity electronic materials are critical components for high-performance electronic and photonic devices as either active functional materials or thermal management materials. We report an isotropic high thermal conductivity over 500 W m-1K-1 at room temperature in high-quality wafer-scale cubic silicon carbide (3C-SiC) crystals, which is the second highest among large crystals (only surpassed by diamond). Furthermore, the corresponding 3C-SiC thin films are found to have record-high in-plane and cross-plane thermal conductivity, even higher than diamond thin films with equivalent thicknesses. Our results resolve a long-lasting puzzle that the literature values of thermal conductivity for 3C-SiC are perplexingly lower than the structurally more complex 6H-SiC. Further analysis reveals that the observed high thermal conductivity in this work arises from the high purity and high crystal quality of 3C-SiC crystals which excludes the exceptionally strong defect-phonon scatterings in 3C-SiC. Moreover, by integrating 3C-SiC with other semiconductors by epitaxial growth, we show that the measured 3C-SiC-Si TBC is among the highest for semiconductor interfaces. These findings not only provide insights for fundamental phonon transport mechanisms, also suggest that 3C-SiC may constitute an excellent wide-bandgap semiconductor for applications of power electronics as either active components or substrates. △ Less

Submitted 11 July, 2022; originally announced July 2022.

Denoising of Three-Dimensional Fast Spin Echo Magnetic Resonance Images of Knee Joints using Spatial-Variant Noise-Relevant Residual Learning of Convolution Neural Network

Authors: Shutian Zhao, Donal G. Cahill, Siyue Li, Fan Xiao, Thierry Blu, James F Griffith, Weitian Chen

Abstract: Two-dimensional (2D) fast spin echo (FSE) techniques play a central role in the clinical magnetic resonance imaging (MRI) of knee joints. Moreover, three-dimensional (3D) FSE provides high-isotropic-resolution magnetic resonance (MR) images of knee joints, but it has a reduced signal-to-noise ratio compared to 2D FSE. Deep-learning denoising methods are a promising approach for denoising MR images… ▽ More Two-dimensional (2D) fast spin echo (FSE) techniques play a central role in the clinical magnetic resonance imaging (MRI) of knee joints. Moreover, three-dimensional (3D) FSE provides high-isotropic-resolution magnetic resonance (MR) images of knee joints, but it has a reduced signal-to-noise ratio compared to 2D FSE. Deep-learning denoising methods are a promising approach for denoising MR images, but they are often trained using synthetic noise due to challenges in obtaining true noise distributions for MR images. In this study, inherent true noise information from 2-NEX acquisition was used to develop a deep-learning model based on residual learning of convolutional neural network (CNN), and this model was used to suppress the noise in 3D FSE MR images of knee joints. The proposed CNN used two-step residual learning over parallel transporting and residual blocks and was designed to comprehensively learn real noise features from 2-NEX training data. The results of an ablation study validated the network design. The new method achieved improved denoising performance of 3D FSE knee MR images compared with current state-of-the-art methods, based on the peak signal-to-noise ratio and structural similarity index measure. The improved image quality after denoising using the new method was verified by radiological evaluation. A deep CNN using the inherent spatial-varying noise information in 2-NEX acquisitions was developed. This method showed promise for clinical MRI assessments of the knee, and has potential applications for the assessment of other anatomical structures. △ Less

Submitted 20 April, 2022; originally announced April 2022.

Comments: 6 figures, abstract accepted by Joint Annual Meeting ISMRM-ESMRMB & ISMRT 31st Annual Meeting

Journal ref: Computers in Biology and Medicine, Volume 151, Part A, 2022, 106295, ISSN 0010-4825

Temperature map** of stacked silicon dies from x-ray diffraction intensities

Authors: Darshan Chalise, Peter Kenesei, Sarvjit D. Shastri, David G. Cahill

Abstract: Increasing power densities in integrated circuits has led to an increased prevalence of thermal hotspots in integrated circuits. Tracking these thermal hotspots is imperative to prevent circuit failures. In 3D integrated circuits, conventional surface techniques like infrared thermometry are unable to measure 3D temperature distribution and optical and magnetic resonance techniques are difficult t… ▽ More Increasing power densities in integrated circuits has led to an increased prevalence of thermal hotspots in integrated circuits. Tracking these thermal hotspots is imperative to prevent circuit failures. In 3D integrated circuits, conventional surface techniques like infrared thermometry are unable to measure 3D temperature distribution and optical and magnetic resonance techniques are difficult to apply due to the presence of metals and large current densities. X-rays offer high penetration depth and can be used to probe 3D structures. We report a method utilizing the temperature dependence of x-rays diffraction intensity via the Debye-Waller factor to simultaneously map the temperature of an individual silicon die that is a part of a stack of dies. Utilizing beamline 1-ID-E at the Advanced Photon Source (Argonne), we demonstrate for each individual silicon die, a temperature resolution of 3 K, a spatial resolution of 100 um x 400 um and a temporal resolution of 20 s. Utilizing a sufficiently high intensity laboratory source, e.g., from a liquid anode source, this method can be scaled down to laboratories for non-invasive temperature map** of 3D integrated circuits. △ Less

Submitted 29 March, 2022; v1 submitted 23 March, 2022; originally announced March 2022.

Journal ref: Phys. Rev. Applied 18, 014076 (2022)1-8)

Highly sensitive and high throughput magnetic resonance thermometry using superparamagnetic nanoparticles

Authors: Darshan Chalise, David G. Cahill

Abstract: Magnetic resonance imaging (MRI) enables non-invasive 3D thermometry during thermal ablation of cancerous tumors. While T1 or T2 contrast MRI are relatively insensitive to temperature, techniques with greater temperature sensitivity such as chemical shift or diffusion imaging suffer from motional artifacts and long scan times. We describe an approach for highly sensitive and high throughput MR the… ▽ More Magnetic resonance imaging (MRI) enables non-invasive 3D thermometry during thermal ablation of cancerous tumors. While T1 or T2 contrast MRI are relatively insensitive to temperature, techniques with greater temperature sensitivity such as chemical shift or diffusion imaging suffer from motional artifacts and long scan times. We describe an approach for highly sensitive and high throughput MR thermometry that is not susceptible to motional artifacts. We use superparamagnetic iron oxide nanoparticles (SPIONs) to spoil T2 of water protons. Motional narrowing results in proportionality between T2 and the diffusion constant, dependent only on the temperature in a specific environment. Our results show, for pure water, the nuclear magnetic resonance (NMR) linewidth and T2 follow the same temperature dependence as the self-diffusion constant of water. Thus, T2 map** is a diffusion map** in the presence of SPIONs, and T2 is a thermometer. For pure water, a T2 map** of a 64 x 64 image (voxel size = 0.5 mm x 0.5 mm x 3 mm) in a 9.4 T MRI scanner resulted in a temperature resolution of 0.5 K for a scan time of 2 minutes. This indicates a highly sensitive and high throughput MR thermometry technique potentially useful for monitoring of biological tissues during thermal therapies or for diagnosis. △ Less

Submitted 1 January, 2023; v1 submitted 23 March, 2022; originally announced March 2022.

Phonon, Electron, and Magnon Excitations in Antiferromagnetic L1$_{0}$-type MnPt

Authors: Kisung Kang, David G. Cahill, André Schleife

Abstract: Antiferromagnetic L1$_{0}$-type MnPt is a material with relatively simple crystal and magnetic structure, recently attracting interest due to its high N{é}el temperature and wide usage as a pinning layer in magnetic devices. While it is experimentally well characterized, the theoretical understanding is much less developed, in part due to the challenging accuracy requirements dictated by the small… ▽ More Antiferromagnetic L1$_{0}$-type MnPt is a material with relatively simple crystal and magnetic structure, recently attracting interest due to its high N{é}el temperature and wide usage as a pinning layer in magnetic devices. While it is experimentally well characterized, the theoretical understanding is much less developed, in part due to the challenging accuracy requirements dictated by the small underlying energy scales that govern magnetic ordering in antiferromagnetic metals. In this work, we use density functional theory, the Korringa-Kohn-Rostoker formalism, and a Heisenberg model to establish a comprehensive theoretical description of antiferromagnetic L1$_{0}$-type MnPt, along with accuracy limits, by thoroughly comparing to available literature data. Our simulations show that the contribution of the magnetic dipole interaction to the magnetocrystalline anisotropy energy of $K_{1}$=1.07$\times 10^{6}$\,J/m$^3$ is comparable in magnitude to the spin-orbit contribution. Using our result for the magnetic susceptibility of $5.25\times10^{-4}$, a lowest magnon frequency of about 2.02\,THz is predicted, confirming THz spin dynamics in this material. From our data for electron, phonon, and magnon dispersion we compute the individual contributions to the total heat capacity and show that the dominant term at or above 2\,K arises from phonons. From the Landau-Lifshitz-Gilbert equation, we compute a Néel temperature of 990--1070 K. Finally, we quantify the magnitude of the magneto-optical Kerr effect generated by applying an external magnetic field. Our results provide insight into the underlying physics, which is critical for a deep understanding of fundamental limits of the time scale of spin dynamics, stability of the magnetic ordering, and the possibility of magneto-optical detection of collective spin motion. △ Less

Submitted 27 December, 2021; originally announced December 2021.

Direct Observation of Reversible Heat Absorption in Li-ion Battery Enabled by Ultra-Sensitive Thermometry

Authors: Zhe Cheng, Xiaoyang Ji, David G. Cahill

Abstract: The reversible heat in lithium-ion batteries (LIBs) due to entropy change is fundamentally important for understanding the chemical reactions in LIBs and develo** proper thermal management strategies. However, the direct measurements of reversible heat are challenging due to the limited temperature resolution of applied thermometry. In this work, by develo** an ultra-sensitive thermometry with… ▽ More The reversible heat in lithium-ion batteries (LIBs) due to entropy change is fundamentally important for understanding the chemical reactions in LIBs and develo** proper thermal management strategies. However, the direct measurements of reversible heat are challenging due to the limited temperature resolution of applied thermometry. In this work, by develo** an ultra-sensitive thermometry with a differential AC bridge using two thermistors, the noise-equivalent temperature resolution we achieve (10 uK) is several orders of magnitude higher than previous thermometry applied on LIBs. We directly observe reversible heat absorption of a LIR2032 coin cell during charging with negligible irreversible heat generation and a linear relation between heat generations and discharging currents. The cell entropy changes determined from the reversible heat agree excellently with those measured from temperature dependent open circuit voltage. Moreover, it is found that the large reversible entropy change can cancel out the irreversible entropy generation at a charging rate as large as C/3.7 and produce a zero-heat-dissipation LIB during charging. Our work significantly contributes to fundamental understanding of the entropy changes and heat generations of the chemical reactions in LIBs, and reveals that reversible heat absorption can be an effective way to cool LIBs during charging. △ Less

Submitted 1 July, 2021; originally announced July 2021.

Thermal conductivity of intercalation, conversion, and alloying lithium-ion battery electrode materials as function of their state of charge

Authors: Jungwoo Shin, Sanghyeon Kim, Hoonkee Park, Ho Won Jang, David G. Cahill, Paul V. Braun

Abstract: Upon insertion and extraction of lithium, materials important for electrochemical energy storage can undergo changes in thermal conductivity ($Λ$) and elastic modulus ($\it M$). These changes are attributed to evolution of the intrinsic thermal carrier lifetime and interatomic bonding strength associated with structural transitions of electrode materials with varying degrees of reversibility. Usin… ▽ More Upon insertion and extraction of lithium, materials important for electrochemical energy storage can undergo changes in thermal conductivity ($Λ$) and elastic modulus ($\it M$). These changes are attributed to evolution of the intrinsic thermal carrier lifetime and interatomic bonding strength associated with structural transitions of electrode materials with varying degrees of reversibility. Using in situ time-domain thermoreflectance (TDTR) and picosecond acoustics, we systemically study $Λ$ and $\it M$ of conversion, intercalation and alloying electrode materials during cycling. The intercalation V$_{2}$O$_{5}$ and TiO$_{2}$ exhibit non-monotonic reversible $Λ$ and $\it M$ switching up to a factor of 1.8 ($Λ$) and 1.5 ($\it M$) as a function of lithium content. The conversion Fe$_{2}$O$_{3}$ and NiO undergo irreversible decays in $Λ$ and $\it M$ upon the first lithiation. The alloying Sb shows the largest and partially reversible order of the magnitude switching in $Λ$ between the delithiated (18 W m$^{-1}$ K$^{-1}$) and lithiated states (<1 W m$^{-1}$ K$^{-1}$). The irreversible $Λ$ is attributed to structural degradation and pulverization resulting from substantial volume changes during cycling. These findings provide new understandings of the thermal and mechanical property evolution of electrode materials during cycling of importance for battery design, and also point to pathways for forming materials with thermally switchable properties. △ Less

Submitted 21 September, 2021; v1 submitted 30 June, 2021; originally announced June 2021.

Comments: Main article: 31 pages, 6 figures. SI: 23 pages, 12 figures

Journal ref: Curr. Opin. Solid State Mater. Sci. 26 (2022) 100980

Good Solid-State Electrolytes Have Low, Glass-like Thermal Conductivity

Authors: Zhe Cheng, Beniamin Zahiri, Xiaoyang Ji, Chen Chen, Darshan Chalise, Paul V. Braun, David G. Cahill

Abstract: Management of heat during charging and discharging of Li-ion batteries is critical for their safety, reliability, and performance. Understanding the thermal conductivity of the materials comprising batteries is crucial for controlling the temperature and temperature distribution in batteries. This work provides systemic quantitative measurements of the thermal conductivity of three important class… ▽ More Management of heat during charging and discharging of Li-ion batteries is critical for their safety, reliability, and performance. Understanding the thermal conductivity of the materials comprising batteries is crucial for controlling the temperature and temperature distribution in batteries. This work provides systemic quantitative measurements of the thermal conductivity of three important classes of solid electrolytes (oxides, sulfides, and halides) over the temperature range 150-350 K. Studies include the oxides Li1.5Al0.5Ge1.5(PO4)3 and Li6.4La3Zr1.4Ta0.6O12, sulfides Li2S-P2S5, Li6PS5Cl, and Na3PS4, and halides Li3InCl6 and Li3YCl6. Thermal conductivities of sulfide and halide solid electrolytes are in the range 0.45-0.70 W m-1 K-1; thermal conductivities of Li6.4La3Zr1.4Ta0.6O12 and Li1.5Al0.5Ge1.5(PO4)3 are 1.4 W m-1 K-1 and 2.2 W m-1 K-1, respectively. For most of the solid electrolytes studied in this work, the thermal conductivity increases with increasing temperature; i.e., the thermal conductivity has a glass-like temperature dependence. The measured room-temperature thermal conductivities agree well with the calculated minimum thermal conductivities indicating the phonon mean-free-paths in these solid electrolytes are close to an atomic spacing. We attribute the low, glass-like thermal conductivity of the solid electrolytes investigated to the combination of their complex crystal structures and the atomic-scale disorder induced by the materials processing methods that are typically needed to produce high ionic conductivities. △ Less

Submitted 15 March, 2021; originally announced March 2021.

Thermal Visualization of Buried Interfaces by Transient and Steady-State Responses of Time-Domain Thermoreflectance

Authors: Zhe Cheng, Fengwen Mu, Xiaoyang Ji, Tiangui You, Wenhui Xu, Tadatomo Suga, Xin Ou, David G. Cahill, Samuel Graham

Abstract: Thermal resistances from interfaces impede heat dissipation in micro/nanoscale electronics, especially for high-power electronics. Despite the growing importance of understanding interfacial thermal transport, advanced thermal characterization techniques which can visualize thermal conductance across buried interfaces, especially for nonmetal-nonmetal interfaces, are still under development. This… ▽ More Thermal resistances from interfaces impede heat dissipation in micro/nanoscale electronics, especially for high-power electronics. Despite the growing importance of understanding interfacial thermal transport, advanced thermal characterization techniques which can visualize thermal conductance across buried interfaces, especially for nonmetal-nonmetal interfaces, are still under development. This work reports a dual-modulation-frequency TDTR map** technique to visualize the thermal conduction across buried semiconductor interfaces for beta-Ga2O3-SiC samples. Both the beta-Ga2O3 thermal conductivity and the buried beta-Ga2O3-SiC thermal boundary conductance (TBC) are visualized for an area of 200 um x 200 um. Areas with low TBC values ( smaller than 20 MW/m2-K) are successfully identified on the TBC map, which correspond to weakly bonded interfaces caused by high-temperature annealing. The steady-state temperature rise (detector voltage), usually ignored in TDTR measurements, is found to be able to probe TBC variations of the buried interfaces without the limit of thermal penetration depth. This technique can be applied to detect defects/voids in deeply buried heterogeneous interfaces non-destructively, and also opens a door for the visualization of thermal conductance in nanoscale nonhomogeneous structures. △ Less

Submitted 14 March, 2021; originally announced March 2021.

Thermal Conductivity Map** of Oxidized SiC SiC Composites by Time Domain Thermoreflectance with Heterodyne Detection

Authors: Xiaoyang Ji, Zhe Cheng, Ella Kartika Pek, David G. Cahill

Abstract: Silicon carbide silicon carbide (SiC SiC) composites are often used in oxidizing environments at high temperatures. Measurements of the thermal conductance of the oxide layer provide a way to better understand the oxidation process with high spatial resolution. We use time domain thermoreflectance (TDTR) to map the thermal conductance of the oxide layer and the thermal conductivity of the SiC SiC… ▽ More Silicon carbide silicon carbide (SiC SiC) composites are often used in oxidizing environments at high temperatures. Measurements of the thermal conductance of the oxide layer provide a way to better understand the oxidation process with high spatial resolution. We use time domain thermoreflectance (TDTR) to map the thermal conductance of the oxide layer and the thermal conductivity of the SiC SiC composite with a spatial resolution of 3 μm. Heterodyne detection using a 50 kHz modulated probe beam and a 10 MHz modulated pump suppresses the coherent pick-up and enables faster data acquisition than what has previously been possible using sequential demodulation. By analyzing the noise of the measured signals, we find that in the limit of small integration time constants or low laser powers, the dominant source of noise is the input noise of the preamplifier. The thermal conductance of the oxide that forms on the fiber region is lower than the oxide on the matrix due to small differences in thickness and thermal conductivity. △ Less

Submitted 1 February, 2021; originally announced February 2021.

Journal ref: Journal of the American Ceramic Society, 2021: 00,1-9

Polar magneto-optical Kerr effect in antiferromagnetic M$_2$As (M=Cr, Mn, Fe) under an external magnetic field

Authors: Kisung Kang, Kexin Yang, Krithik Puthalath, David G. Cahill, André Schleife

Abstract: Antiferromagnetic metals attract tremendous interest for memory applications due to their expected fast response dynamics in the terahertz frequency regime. Reading from and writing information into these materials is not easily achievable using magnetic fields, due to weak high-order magneto-optical signals and robustness of the magnetic structure against external magnetic fields. Polarized elect… ▽ More Antiferromagnetic metals attract tremendous interest for memory applications due to their expected fast response dynamics in the terahertz frequency regime. Reading from and writing information into these materials is not easily achievable using magnetic fields, due to weak high-order magneto-optical signals and robustness of the magnetic structure against external magnetic fields. Polarized electromagnetic radiation is a promising alternative for probing their response, however, when ideal antiferromagnetic symmetry is present, this response vanishes. Hence, in this work we combine first-principles simulations with measurements of the polar magneto-optical Kerr effect under external magnetic fields, to study magneto-optical response of antiferromagnetic M$_2$As (M=Cr, Mn, and Fe). We devise a computational scheme to compute the magnetic susceptibility from total-energy changes using constraints on magnetic-moment tilting. Our predictions of the spectral dependence of polar magneto-optical Kerr rotation and ellipticity allow us to attribute these effects to breaking of the magnetic symmetry. We show that tilting affects the exchange interaction, while the spin-orbit interaction remains unaffected as the tilting angle changes. Our work provides understanding of the polar magneto-optical Kerr effect on a band structure level and underscores the importance of the magnetic susceptibility when searching for materials with large magneto-optical response. △ Less

Submitted 3 December, 2020; originally announced December 2020.

Comments: 9 pages, 9 figures

Effect of isotope disorder on the Raman spectra of cubic boron arsenide

Authors: Akash Rai, Sheng Li, Hanlin Wu, Bing Lv, David G. Cahill

Abstract: Boron arsenide (c-BAs) is at the forefront of research on ultrahigh thermal conductivity materials. We present a Raman scattering study of isotopically tailored cubic boron arsenide single crystals for 11 isotopic compositions spanning the range from nearly pure c-$^{10}$BAs to nearly pure c-$^{11}$BAs. Our results provide insights on the effects of strong mass disorder on optical phonons and the… ▽ More Boron arsenide (c-BAs) is at the forefront of research on ultrahigh thermal conductivity materials. We present a Raman scattering study of isotopically tailored cubic boron arsenide single crystals for 11 isotopic compositions spanning the range from nearly pure c-$^{10}$BAs to nearly pure c-$^{11}$BAs. Our results provide insights on the effects of strong mass disorder on optical phonons and the appearance of two-mode behavior in the Raman spectra of mixed crystals. Strong isotope disorder also relaxes the one-phonon Raman selection rules, resulting in disorder-activated Raman scattering by acoustic phonons. △ Less

Submitted 10 August, 2020; v1 submitted 10 August, 2020; originally announced August 2020.

Comments: 16 pages, 6 figures, "submitted to Physical Review Materials"

Journal ref: Phys. Rev. Materials 5, 013603 (2021)

Magnetocrystalline anisotropy of the easy-plane metallic antiferromagnet Fe$_2$As

Authors: Kexin Yang, Kisung Kang, Zhu Diao, Manohar H. Karigerasi, Daniel P. Shoemaker, André Schleife, David G. Cahill

Abstract: Magnetocrystalline anisotropy is a fundamental property of magnetic materials that determines the dynamics of magnetic precession, the frequency of spin waves, the thermal stability of magnetic domains, and the efficiency of spintronic devices. We combine torque magnetometry and density functional theory calculations to determine the magnetocrystalline anisotropy of the metallic antiferromagnet Fe… ▽ More Magnetocrystalline anisotropy is a fundamental property of magnetic materials that determines the dynamics of magnetic precession, the frequency of spin waves, the thermal stability of magnetic domains, and the efficiency of spintronic devices. We combine torque magnetometry and density functional theory calculations to determine the magnetocrystalline anisotropy of the metallic antiferromagnet Fe$_2$As. Fe$_2$As has a tetragonal crystal structure with the Néel vector lying in the (001) plane. We report that the four-fold magnetocrystalline anisotropy in the (001)-plane of Fe$_2$As is extremely small, ${K_{22}} = - 150~{\rm{ J/}}{\rm{m}^{\rm{3}}}$ at T = 4 K, much smaller than perpendicular magnetic anisotropy of ferromagnetic structure widely used in spintronics device. ${K_{22}}$ is strongly temperature dependent and close to zero at T > 150 K. The anisotropy ${K_1}$ in the (010) plane is too large to be measured by torque magnetometry and we determine ${K_1} = -830~{\rm{ kJ/}}{\rm{m}^{\rm{3}}}$ using first-principles density functional theory. Our simulations show that the contribution to the anisotropy from classical magnetic dipole-dipole interactions is comparable to the contribution from spin-orbit coupling. The calculated four-fold anisotropy in the (001) plane ${K_{22}}$ ranges from $- 292~{\rm{ J/}}{\rm{m}^{\rm{3}}}$ to $280~{\rm{ J/}}{\rm{m}^{\rm{3}}}$, the same order of magnitude as the measured value. We use ${K_1}$ from theory to predict the frequency and polarization of the lowest frequency antiferromagnetic resonance mode and find that the mode is linearly polarized in the (001)-plane with $f = $ 670 GHz. △ Less

Submitted 7 June, 2020; originally announced June 2020.

Journal ref: Phys. Rev. B 102, 064415 (2020)

Non-Equilibrium Heat Transport in Pt and Ru Probed by an Ultrathin Co Thermometer

Authors: Hye** Jang, Johannes Kimling, David G. Cahill

Abstract: Non-equilibrium of electrons, phonons, and magnons in metals is a fundamental phenomenon in condensed matter physics and serves as an important driver in the field of ultrafast magnetism. In this work, we demonstrate that the magnetization of a sub-nm-thick Co layer with perpendicular magnetic anisotropy can effectively serve as a thermometer to monitor non-equilibrium dynamics in adjacent metals,… ▽ More Non-equilibrium of electrons, phonons, and magnons in metals is a fundamental phenomenon in condensed matter physics and serves as an important driver in the field of ultrafast magnetism. In this work, we demonstrate that the magnetization of a sub-nm-thick Co layer with perpendicular magnetic anisotropy can effectively serve as a thermometer to monitor non-equilibrium dynamics in adjacent metals, Pt and Ru, via time-resolved magneto-optic Kerr effect. The temperature evolutions of the Co thermometer embedded in Pt layers of different thicknesses, 6-46 nm, are adequately described by a phenomenological three temperature model with a consistent set of materials parameters. We do not observe any systematic deviations between the model and the data that can be caused by a non-thermal distribution of electronic excitations. We attribute the consistently good agreement between the model and the data to strong electron-electron interaction in Pt. By using Pt/Co/Pt and Pt/Co/Pt/Ru structures, we determine the electron-phonon coupling parameters of Pt and Ru, g_ep(Pt)=(6+/-1)x10^17 W m-3 K-1 and g_ep(Ru)=(9+/-2)x10^17 W m-3 K-1. We also find that the length scales of non-equilibrium between electrons and phonons are l_ep=(Λ_e/g_ep)^1/2 =9 nm for Pt and 7 nm for Ru, shorter than their optical absorption depths, 11 and 13 nm, respectively. Therefore, the optically thick Pt and Ru layers show two steps of temperature rise: The initial jump of electron temperature that occurs within 1 ps is caused by direct optical excitation and electronic heat transport within a distance l_ep for the Co layer. The second temperature rise is caused by heat transport by electrons and phonons that are near thermal equilibrium. We contrast two-temperature modeling of heat transport in Pt an Ru films to calculations for Cu, which has a much longer non-equilibrium length scale, l_ep=63 nm. △ Less

Submitted 28 December, 2019; originally announced December 2019.

Comments: 37 pages, 8 figures

Journal ref: Phys. Rev. B 101, 064304 (2020)

Thermal Conductivity of Oxide Tunnel Barriers in Magnetic Tunnel Junctions Measured by Ultrafast Thermoreflectance and Magneto-optic Kerr Effect Thermometry

Authors: Hye** Jang, Luca Marnitz, Torsten Huebner, Johannes Kimling, Timo Kuschel, David G. Cahill

Abstract: Spin-dependent charge transport in magnetic tunnel junctions (MTJs) can be manipulated by a temperature gradient, which can be utilized for spintronic and spin caloritronic applications. Evaluation of the thermally induced phenomena requires knowledge of the temperature differences across the oxide tunnel barrier adjacent to the ferromagnetic (FM) leads. However, it is challenging to accurately me… ▽ More Spin-dependent charge transport in magnetic tunnel junctions (MTJs) can be manipulated by a temperature gradient, which can be utilized for spintronic and spin caloritronic applications. Evaluation of the thermally induced phenomena requires knowledge of the temperature differences across the oxide tunnel barrier adjacent to the ferromagnetic (FM) leads. However, it is challenging to accurately measure thermal properties of an oxide tunnel barrier consisting of only a few atomic layers. In this work, we experimentally interrogate the temperature evolutions in Ru/oxide/FM/seed/MgO (oxide=MgO, MgAl2O4; FM=Co, CoFeB; seed=Pt, Ta) structures having perpendicular magnetic anisotropy using ultrafast thermometry. The Ru layer is optically thick and heated by ultrafast laser pulses; the subsequent temperature changes are monitored using thermoreflectance of Ru and magneto-optic Kerr effect (MOKE) of the FM layers. We independently measure the response times of Co and CoFeB magnetism using quadratic MOKE and obtain τem=0.2 ps for Co and 2 ps for CoFeB. These time scales are much shorter than the time scale of heat transport through the oxide tunnel barrier, which occurs at 10-3000 ps. We determine effective thermal conductivities of MgO and MgAl2O4 tunnel barriers in the range of 0.4-0.6 W m-1 K-1, comparable to an estimate of the series conductance of the Ru/oxide and oxide/FM interfaces and an order of magnitude smaller than the thermal conductivity of MgO thin films. We find that the electron-phonon thermal conductance near the tunnel barrier is only a factor of 5-12 larger than the thermal conductance of the oxide tunnel barrier. Therefore, the drop in the electronic temperature is approximately 20-30% larger than the drop in the phonon temperature across the tunnel barrier. △ Less

Submitted 7 December, 2019; originally announced December 2019.

Comments: 31 pages, 5 figures

Journal ref: Phys. Rev. Applied 13, 024007 (2020)

Magneto-optic Response of the Metallic Antiferromagnet Fe$_{2}$As to Ultrafast Temperature Excursions

Authors: Kexin Yang, Kisung Kang, Zhu Diao, Arun Ramanathan, Manohar H. Karigerasi, Daniel P. Shoemaker, André Schleife, David G. Cahill

Abstract: The linear magneto-optical Kerr effect (MOKE) is often used to probe magnetism of ferromagnetic materials, but MOKE cannot be applied to collinear antiferromagnets (AFs) due to the cancellation of sub-lattice magnetization. Magneto-optical constants that are quadratic in magnetization, however, provide an approach for studying AFs on picosecond time scales. Here, we combine transient measurements… ▽ More The linear magneto-optical Kerr effect (MOKE) is often used to probe magnetism of ferromagnetic materials, but MOKE cannot be applied to collinear antiferromagnets (AFs) due to the cancellation of sub-lattice magnetization. Magneto-optical constants that are quadratic in magnetization, however, provide an approach for studying AFs on picosecond time scales. Here, we combine transient measurements of optical reflectivity and birefringence to study the linear optical response of Fe$_{2}$As to small ultrafast temperature excursions. We performed temperature dependent pump-probe measurements on crystallographically isotropic (001) and anisotropic (010) faces of Fe$_{2}$As bulk crystals. We find the largest optical signals arise from changes in the index of refraction along the $z$-axis, i.e. perpendicular to the Néel vector. Both real and imaginary parts of the time-resolved optical birefringence rotation signal approximately follow the temperature dependence of the magnetic heat capacity, as expected if the changes in dielectric constants are dominated by contributions of exchange interactions to the dielectric constant. We conclude that under our experimental conditions, changes in the exchange interaction contribute more strongly to the temperature dependence of the magneto-optic constants than the Voigt effect. △ Less

Submitted 5 August, 2019; v1 submitted 18 March, 2019; originally announced March 2019.

Journal ref: Phys. Rev. Materials 3, 124408 (2019)

Anomalous Spin-Orbit Torques in Magnetic Single-Layer Films

Authors: Wenrui Wang, Tao Wang, Vivek P. Amin, Yang Wang, Anil radhakrishnan, Angie Davidson, Shane R. Allen, T. J. Silva, Hendrik Ohldag, Davor Balzar, Barry L. Zink, Paul M. Haney, John Q. Xiao, David G. Cahill, Virginia O. Lorenz, Xin Fan

Abstract: Spin-orbit interaction (SOI) couples charge and spin transport, enabling electrical control of magnetization. A quintessential example of SOI-induced transport is the anomalous Hall effect (AHE), first observed in 1880, in which an electric current perpendicular to the magnetization in a magnetic film generates charge accumulation on the surfaces. Here we report the observation of a counterpart of… ▽ More Spin-orbit interaction (SOI) couples charge and spin transport, enabling electrical control of magnetization. A quintessential example of SOI-induced transport is the anomalous Hall effect (AHE), first observed in 1880, in which an electric current perpendicular to the magnetization in a magnetic film generates charge accumulation on the surfaces. Here we report the observation of a counterpart of the AHE that we term the anomalous spin-orbit torque (ASOT), wherein an electric current parallel to the magnetization generates opposite spin-orbit torques on the surfaces of the magnetic film. We interpret the ASOT as due to a spin-Hall-like current generated with an efficiency of 0.053+/-0.003 in Ni80Fe20, comparable to the spin Hall angle of Pt. Similar effects are also observed in other common ferromagnetic metals, including Co, Ni, and Fe. First principles calculations corroborate the order of magnitude of the measured values. This work suggests that a strong spin current with spin polarization transverse to magnetization can exist in a ferromagnet, despite spin dephasing. It challenges the current understanding of spin-orbit torque in magnetic/nonmagnetic bilayers, in which the charge-spin conversion in the magnetic layer has been largely neglected. △ Less

Submitted 14 February, 2019; originally announced February 2019.

Comments: 23 pages, 3 figures and 1 table

Impact of thermal fluctuations on transport in antiferromagnetic semimetals

Authors: Youngseok Kim, Moon Jip Park, David G. Cahill, Matthew J. Gilbert

Abstract: Recent demonstrations on manipulating antiferromagnetic (AF) order have triggered a growing interest in antiferromagnetic metal (AFM), and potential high-density spintronic applications demand further improvements in the anisotropic magnetoresistance (AMR). The antiferromagnetic semimetals (AFS) are newly discovered materials that possess massless Dirac fermions that are protected by the crystalli… ▽ More Recent demonstrations on manipulating antiferromagnetic (AF) order have triggered a growing interest in antiferromagnetic metal (AFM), and potential high-density spintronic applications demand further improvements in the anisotropic magnetoresistance (AMR). The antiferromagnetic semimetals (AFS) are newly discovered materials that possess massless Dirac fermions that are protected by the crystalline symmetries. In this material, a reorientation of the AF order may break the underlying symmetries and induce a finite energy gap. As such, the possible phase transition from the semimetallic to insulating phase gives us a choice for a wide range of resistance ensuring a large AMR. To further understand the robustness of the phase transition, we study thermal fluctuations of the AF order in AFS at a finite temperature. For macroscopic samples, we find that the thermal fluctuations effectively decrease the magnitude of the AF order by renormalizing the effective Hamiltonian. Our finding suggests that the insulating phase exhibits a gap narrowing at elevated temperatures, which leads to a substantial decrease in AMR. We also examine spatially correlated thermal fluctuations for microscopic samples by solving the microscopic Landau-Lifshitz-Gilbert equation finding a qualitative difference of the gap narrowing in the insulating phase. For both cases, the semimetallic phase shows a minimal change in its transmission spectrum illustrating the robustness of the symmetry protected states in AFS. Our finding may serve as a guideline for estimating and maximizing AMR of the AFS samples at elevated temperatures. △ Less

Submitted 24 May, 2018; originally announced May 2018.

Comments: 19 pages, 7 figures

Journal ref: Phys. Rev. B 98, 024409 (2018)

Picosecond spin Seebeck effect

Authors: Johannes Kimling, Gyung-Min Choi, Jack T. Brangham, Tristan Matalla-Wagner, Torsten Huebner, Timo Kuschel, Fengyuan Yang, David G. Cahill

Abstract: We report time-resolved magneto-optic Kerr effect measurements of the longitudinal spin Seebeck effect driven by an interfacial temperature difference between itinerant electrons and magnons. The measured time-evolution of spin accumulation induced by laser-excitation indicates transfer of angular momentum across Au/Y$_3$Fe$_5$O$_{12}$ and Cu/Y$_3$Fe$_5$O$_{12}$ interfaces on a picosecond time-sca… ▽ More We report time-resolved magneto-optic Kerr effect measurements of the longitudinal spin Seebeck effect driven by an interfacial temperature difference between itinerant electrons and magnons. The measured time-evolution of spin accumulation induced by laser-excitation indicates transfer of angular momentum across Au/Y$_3$Fe$_5$O$_{12}$ and Cu/Y$_3$Fe$_5$O$_{12}$ interfaces on a picosecond time-scale. The product of spin-mixing conductance and interfacial spin Seebeck coefficient determined is of the order of $10^8$ A m$^{-2}$ K$^{-1}$. △ Less

Submitted 2 August, 2016; originally announced August 2016.

Comments: 16 pages, 4 figures, 1 table

Journal ref: Phys. Rev. Lett. 118, 057201 (2017)

Role of remote interfacial phonon (RIP) scattering in heat transport across graphene/SiO2 interfaces

Authors: Yee Kan Koh, Austin S. Lyons, Myung-Ho Bae, Bin Huang, Vincent E. Dorgan, David G. Cahill, Eric Pop

Abstract: Heat transfer across interfaces of graphene and polar dielectrics (e.g. SiO2) could be mediated by direct phonon coupling, as well as electronic coupling with remote interfacial phonons (RIPs). To understand the relative contribution of each component, we develop a new pump-probe technique, called voltage-modulated thermoreflectance (VMTR), to accurately measure the change of interfacial thermal c… ▽ More Heat transfer across interfaces of graphene and polar dielectrics (e.g. SiO2) could be mediated by direct phonon coupling, as well as electronic coupling with remote interfacial phonons (RIPs). To understand the relative contribution of each component, we develop a new pump-probe technique, called voltage-modulated thermoreflectance (VMTR), to accurately measure the change of interfacial thermal conductance under an electrostatic field. We employed VMTR on top gates of graphene field-effect transistors and find that the thermal conductance of SiO2/graphene/SiO2 interfaces increases by up to ΔG=0.8 MW m-2 K-1 under electrostatic fields of <0.2 V nm-1 . We propose two possible explanations for the observed ΔG. First, since the applied electrostatic field induces charge carriers in graphene, our VMTR measurements could originate from heat transfer between the charge carriers in graphene and RIPs in SiO2. Second, the increase in heat conduction could be caused by better conformity of graphene interfaces un-der electrostatic pressure exerted by the induced charge carriers. Regardless of the origins of the observed ΔG, our VMTR measurements establish an upper limit for heat transfer from unbiased graphene to SiO2 substrates via RIP scattering; i.e., only <2 % of the interfacial heat transport is facilitated by RIP scattering even at a carrier concentration of 4x10^12 cm-2. △ Less

Submitted 31 August, 2016; v1 submitted 28 February, 2016; originally announced March 2016.

Comments: 19 pages, 3 figures

Anisotropic Thermal Conductivity of Exfoliated Black Phosphorus

Authors: Hye** Jang, Joshua D. Wood, Christopher R. Ryder, Mark C. Hersam, David G. Cahill

Abstract: We ascertain the anisotropic thermal conductivity of alumina passivated black phosphorus (BP), a reactive 2D nanomaterial with strong in-plane anisotropy. We measure the room temperature thermal conductivity by time-domain thermoreflectance for the three crystalline axes of exfoliated BP. The thermal conductivity along the zigzag direction (86 +/- 8 W/(m*K)) is ~2.5 times higher than that of the a… ▽ More We ascertain the anisotropic thermal conductivity of alumina passivated black phosphorus (BP), a reactive 2D nanomaterial with strong in-plane anisotropy. We measure the room temperature thermal conductivity by time-domain thermoreflectance for the three crystalline axes of exfoliated BP. The thermal conductivity along the zigzag direction (86 +/- 8 W/(m*K)) is ~2.5 times higher than that of the armchair direction (34 +/- 4 W/(m*K)). △ Less

Submitted 30 September, 2015; originally announced October 2015.

Comments: 6 figures, extensive supporting information, in Advanced Materials (2015)

Micro- and Nano-scale Measurement Methods for Phase Change Heat Transfer on Planar and Structured Surfaces

Authors: Jacopo Buongiorno, David G. Cahill, Carlos H. Hidrovo, Saeed Moghaddam, Aaron J. Schmidt, Li Shi

Abstract: In this opinion piece, we discuss recent advances in experimental methods for characterizing phase change heat transfer. We begin with a survey of techniques for high-resolution measurements of temperature and heat flux at the solid surface and in the working fluid. Next, we focus on diagnostic tools for boiling heat transfer and describe techniques for visualizing the temperature and velocity fie… ▽ More In this opinion piece, we discuss recent advances in experimental methods for characterizing phase change heat transfer. We begin with a survey of techniques for high-resolution measurements of temperature and heat flux at the solid surface and in the working fluid. Next, we focus on diagnostic tools for boiling heat transfer and describe techniques for visualizing the temperature and velocity fields, as well as measurements at the single bubble level. Finally, we discuss techniques to probe the kinetics of vapor formation within a few molecular layers of the interface. We conclude with our outlook for future progress in experimental methods for phase change heat transfer. △ Less

Submitted 1 August, 2014; originally announced August 2014.

Journal ref: J. Buongiorno, D. G. Cahill, C. H. Hidrovo, S. Moghaddam, A.J. Schmidt, L. Shi, Nanoscale and Microscale Thermophysical Engineering, vol. 18, p. 270-287 (2014)

Compositionally-modulated Si1-xGex multilayers with cross-plane thermal conductivity below the thin-film alloy limit

Authors: Peixuan Chen, N. A. Katcho, J. P. Feser, Wu Li, M. Glaser, O. G. Schmidt, David G. Cahill, N. Mingo, A. Rastelli

Abstract: We describe epitaxial Ge/Si multilayers with cross-plane thermal conductivities which can be systematically reduced to exceptionally low values, as compared both with bulk and thin-film SiGe alloys of the same average concentration, by simply changing the thicknesses of the constituent layers. Ab initio calculations reveal that partial interdiffusion of Ge into the Si spacers, which naturally resu… ▽ More We describe epitaxial Ge/Si multilayers with cross-plane thermal conductivities which can be systematically reduced to exceptionally low values, as compared both with bulk and thin-film SiGe alloys of the same average concentration, by simply changing the thicknesses of the constituent layers. Ab initio calculations reveal that partial interdiffusion of Ge into the Si spacers, which naturally results from Ge segregation during growth, plays a determinant role, lowering the thermal conductivity below what could be achieved without interdiffusion (perfect superlattice), or with total interdiffusion (alloy limit). This phenomenon is similar to the one previously observed in alloys with embedded nanoparticles, and it stresses the importance of combining alloy and nanosized scatterers simultaneously to minimize thermal conductivity. Our calculations thus suggest that superlattices with sharp interfaces, which are commonly sought but difficult to realize, are worse than compositionally-modulated Si1-xGex multilayers in the search for materials with ultralow thermal conductivities. △ Less

Submitted 3 January, 2013; originally announced January 2013.

Comments: 21 pages, 4 figures

The QUaD Galactic Plane Survey II: A Compact Source Catalog

Authors: T. Culverhouse, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, P. G. Castro, S. Church, R. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, C. Pryke, R. Schwarz, C. O'Sullivan, L. Piccirillo, N. Rajguru , et al. (6 additional authors not shown)

Abstract: We present a catalog of compact sources derived from the QUaD Galactic Plane Survey. The survey covers ~800 square degrees of the inner galaxy (|b|<4 degrees) in Stokes I, Q and U parameters at 100 and 150 GHz, with angular resolution 5 and 3.5 arcminutes. 505 unique sources are identified in I, of which 239 are spatially matched between frequency bands, with 50 (216) detected at 100 (150) GHz alo… ▽ More We present a catalog of compact sources derived from the QUaD Galactic Plane Survey. The survey covers ~800 square degrees of the inner galaxy (|b|<4 degrees) in Stokes I, Q and U parameters at 100 and 150 GHz, with angular resolution 5 and 3.5 arcminutes. 505 unique sources are identified in I, of which 239 are spatially matched between frequency bands, with 50 (216) detected at 100 (150) GHz alone; 182 sources are identified as ultracompact HII (UCHII) regions. Approximating the distribution of total intensity source fluxes as a power-law, we find a slope of $γ_{S,100}=-1.8\pm0.4$ at 100 GHz, and $γ_{S,150}=-2.2\pm0.4$ at 150 GHz. Similarly, the power-law index of the source two-point angular correlation function is $γ_{θ,100}=-1.21\pm0.04$ and $γ_{θ,150}=-1.25\pm0.04$. The total intensity spectral index distribution peaks at $α_{I}\sim0.25$, indicating that dust emission is not the only source of radiation produced by these objects between 100 and 150 GHz; free-free radiation is likely significant in the 100 GHz band. Four sources are detected in polarized intensity P, of which three have matching counterparts in I. Three of the polarized sources lie close to the galactic center, Sagittarius A*, Sagittarius B2 and the Galactic Radio Arc, while the fourth is RCW 49, a bright HII region. An extended polarized source, undetected by the source extraction algorithm on account of its $\sim0.5^{\circ}$ size, is identified visually, and is an isolated example of large-scale polarized emission oriented distinctly from the bulk galactic dust polarization. △ Less

Submitted 18 December, 2010; originally announced December 2010.

Comments: 30 pages, 19 figures, two catalogs; submitted to ApJS; maps and catalogs downloadable from <http://find.spa.umn.edu/quad/quad_galactic>

High temperature thermoelectric response of double-doped SrTiO$_3$ epitaxial films

Authors: Jayakanth Ravichandran, Wolter Siemons, Dong-wook Oh, Justin T. Kardel, Arvind Chari, Herman Heijmerikx, Matthew L. Scullin, Arun Majumdar, Ramamoorthy Ramesh, David G. Cahill

Abstract: SrTiO$_3$ is a promising $n$-type oxide semiconductor for thermoelectric energy conversion. Epitaxial thin films of SrTiO$_3$ doped with both La and oxygen vacancies have been synthesized by pulsed laser deposition (PLD). The thermoelectric and galvanomagnetic properties of these films have been characterized at temperatures ranging from 300 K to 900 K and are typical of a doped semiconductor. The… ▽ More SrTiO$_3$ is a promising $n$-type oxide semiconductor for thermoelectric energy conversion. Epitaxial thin films of SrTiO$_3$ doped with both La and oxygen vacancies have been synthesized by pulsed laser deposition (PLD). The thermoelectric and galvanomagnetic properties of these films have been characterized at temperatures ranging from 300 K to 900 K and are typical of a doped semiconductor. Thermopower values of double-doped films are comparable to previous studies of La doped single crystals at similar carrier concentrations. The highest thermoelectric figure of merit ($ZT$) was measured to be 0.28 at 873 K at a carrier concentration of $2.5\times10^{21}$ cm$^{-3}$. △ Less

Submitted 8 November, 2010; originally announced November 2010.

Comments: Published version, 6 pages, 6 figures link: http://prb.aps.org/abstract/PRB/v82/i16/e165126

Journal ref: Phys. Rev. B 82, 165126 (2010)

Heat Conduction across Monolayer and Few-Layer Graphenes

Authors: Yee Kan Koh, Myung-Ho Bae, David G. Cahill, Eric Pop

Abstract: We report the thermal conductance G of Au/Ti/graphene/SiO2 interfaces (graphene layers 1 < n < 10) typical of graphene transistor contacts. We find G ~ 25 MW m-2 K-1 at room temperature, four times smaller than the thermal conductance of a Au/Ti/SiO2 interface, even when n = 1. We attribute this reduction to the thermal resistance of Au/Ti/graphene and graphene/SiO2 interfaces acting in series. Th… ▽ More We report the thermal conductance G of Au/Ti/graphene/SiO2 interfaces (graphene layers 1 < n < 10) typical of graphene transistor contacts. We find G ~ 25 MW m-2 K-1 at room temperature, four times smaller than the thermal conductance of a Au/Ti/SiO2 interface, even when n = 1. We attribute this reduction to the thermal resistance of Au/Ti/graphene and graphene/SiO2 interfaces acting in series. The temperature dependence of G from 50 < T < 500 K also indicates that heat is predominantly carried by phonons through these interfaces. Our findings indicate that metal contacts can limit not only electrical transport, but also thermal dissipation from sub-micron graphene devices. △ Less

Submitted 28 September, 2010; v1 submitted 26 September, 2010; originally announced September 2010.

Comments: 22 pages, 4 figures, accepted for publication in Nano Letters (2010) This paper has been withdrawn by the authors upon request by Nano Letters. The paper will be available in Nano Letters very soon

Journal ref: Nano Lett. 2010, 10, 4363-4368

Reliably Counting Atomic Planes of Few-Layer Graphene (n>4)

Authors: Yee Kan Koh, Myung-Ho Bae, David G. Cahill, Eric Pop

Abstract: We demonstrate a reliable technique for counting atomic planes (n) of few-layer graphene (FLG) on SiO2/Si substrates by Raman spectroscopy. Our approach is based on measuring the ratio of the integrated intensity of the G graphene peak and the optical phonon peak of Si, I(G)/I(Si), and is particularly useful in the range n>4 where few methods exist. We compare our results with atomic force microsc… ▽ More We demonstrate a reliable technique for counting atomic planes (n) of few-layer graphene (FLG) on SiO2/Si substrates by Raman spectroscopy. Our approach is based on measuring the ratio of the integrated intensity of the G graphene peak and the optical phonon peak of Si, I(G)/I(Si), and is particularly useful in the range n>4 where few methods exist. We compare our results with atomic force microscopy (AFM) measurements and Fresnel equation calculations. Lastly, we apply our method to unambiguously identify n of FLG devices and find that the mobility (~2000 cm2 V-1 s-1) is independent of layer thickness for n>4. △ Less

Submitted 28 September, 2010; v1 submitted 2 September, 2010; originally announced September 2010.

Comments: 18 pages, 5 figures The manuscipt was withdrawn to avoid complications for publication elsewhere

Journal ref: ACS Nano, 5(1), 269-274, 2011

The QUaD Galactic Plane Survey 1: Maps And Analysis of Diffuse Emission

Authors: T. Culverhouse, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, P. G. Castro, S. Church, R. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, R. Schwarz, C. O' Sullivan, L. Piccirillo, C. Pryke, N. Rajguru , et al. (6 additional authors not shown)

Abstract: We present a survey of ~800 square degrees of the galactic plane observed with the QUaD telescope. The primary product of the survey are maps of Stokes I, Q and U parameters at 100 and 150 GHz, with spatial resolution 5 and 3.5 arcminutes respectively. Two regions are covered, spanning approximately 245-295 and 315-5 degrees in galactic longitude l, and -4<b<+4 degrees in galactic latitude b. At 0… ▽ More We present a survey of ~800 square degrees of the galactic plane observed with the QUaD telescope. The primary product of the survey are maps of Stokes I, Q and U parameters at 100 and 150 GHz, with spatial resolution 5 and 3.5 arcminutes respectively. Two regions are covered, spanning approximately 245-295 and 315-5 degrees in galactic longitude l, and -4<b<+4 degrees in galactic latitude b. At 0.02 degree square pixel size, the median sensitivity is 74 and 107 kJy/sr at 100 GHz and 150 GHz respectively in I, and 98 and 120 kJy/sr for Q and U. In total intensity, we find an average spectral index of 2.35+/-0.01 (stat) +/- 0.02 (sys) for |b|<1 degree, indicative of emission components other than thermal dust. A comparison to published dust, synchrotron and free-free models implies an excess of emission in the 100 GHz QUaD band, while better agreement is found at 150 GHz. A smaller excess is observed when comparing QUaD 100 GHz data to WMAP 5-year W band; in this case the excess is likely due to the wider bandwidth of QUaD. Combining the QUaD and WMAP data, a two-component spectral fit to the inner galactic plane (|b|<1 degree) yields mean spectral indices of -0.32 +/- 0.03 and 2.84 +/- 0.03; the former is interpreted as a combination of the spectral indices of synchrotron, free-free and dust, while the second is attributed largely to the thermal dust continuum. In the same galactic latitude range, the polarization data show a high degree of alignment perpendicular to the expected galactic magnetic field direction, and exhibit mean polarization fraction 1.38+/-0.08 (stat) +/-0.1 (sys) % at 100 GHz and 1.70 +/- 0.06 (stat) +/- 0.1 (sys) % at 150GHz. We find agreement in polarization fraction between QUaD 100 GHz and WMAP W band, the latter giving 1.1 +/- 0.4 %. △ Less

Submitted 18 December, 2010; v1 submitted 8 January, 2010; originally announced January 2010.

Comments: 19 pages, 21 figures, accepted for publication in ApJ; new revision includes tests of spectral line contribution. The maps analyzed in this paper are available for public download at http://find.spa.umn.edu/quad/quad_galactic/

Journal ref: The Astrophysical Journal, Vol. 722, Issue 2, pp. 1057-1077 (2010)

Parameter Estimation from Improved Measurements of the CMB from QUaD

Authors: QUaD collaboration, S. Gupta, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, P. G. Castro, S. Church, T. Culverhouse, R. B. Friedman, K. Ganga, W. K. Gear, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, C. O'Sullivan, L. Piccirillo, C. Pryke, N. Rajguru , et al. (7 additional authors not shown)

Abstract: We evaluate the contribution of cosmic microwave background (CMB) polarization spectra to cosmological parameter constraints. We produce cosmological parameters using high-quality CMB polarization data from the ground-based QUaD experiment and demonstrate for the majority of parameters that there is significant improvement on the constraints obtained from satellite CMB polarization data. We split… ▽ More We evaluate the contribution of cosmic microwave background (CMB) polarization spectra to cosmological parameter constraints. We produce cosmological parameters using high-quality CMB polarization data from the ground-based QUaD experiment and demonstrate for the majority of parameters that there is significant improvement on the constraints obtained from satellite CMB polarization data. We split a multi-experiment CMB dataset into temperature and polarization subsets and show that the best-fit confidence regions for the LCDM 6-parameter cosmological model are consistent with each other, and that polarization data reduces the confidence regions on all parameters. We provide the best limits on parameters from QUaD EE/BB polarization data and we find best-fit parameters from the multi-experiment CMB dataset using the optimal pivot scale of k_p=0.013 Mpc-1 to be {omch2, ombh2, H_0, A_s, n_s, tau}= {0.113, 0.0224, 70.6, 2.29 times 10^-9, 0.960, 0.086}. △ Less

Submitted 27 May, 2010; v1 submitted 9 September, 2009; originally announced September 2009.

Comments: 7 pages, 5 figures, updated to reflect published version, minor changes to spelling and format

Journal ref: Astrophys.J.716:1040-1046, 2010

Characterization of the Millimeter-Wave Polarization of Centaurus A with QUaD

Authors: M. Zemcov, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, P. G. Castro, S. Church, T. Culverhouse, R. B. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, C. O'Sullivan, L. Piccirillo, C. Pryke, N. Rajguru , et al. (6 additional authors not shown)

Abstract: Centaurus (Cen) A represents one of the best candidates for an isolated, compact, highly polarized source that is bright at typical cosmic microwave background (CMB) experiment frequencies. We present measurements of the 4 degree by 2 degree region centered on Cen A with QUaD, a CMB polarimeter whose absolute polarization angle is known to 0.5 degrees. Simulations are performed to assess the effec… ▽ More Centaurus (Cen) A represents one of the best candidates for an isolated, compact, highly polarized source that is bright at typical cosmic microwave background (CMB) experiment frequencies. We present measurements of the 4 degree by 2 degree region centered on Cen A with QUaD, a CMB polarimeter whose absolute polarization angle is known to 0.5 degrees. Simulations are performed to assess the effect of misestimation of the instrumental parameters on the final measurement and systematic errors due to the field's background structure and temporal variability from Cen A's nuclear region are determined. The total (Q, U) of the inner lobe region is (1.00 +/- 0.07 (stat.) +/- 0.04 (sys.), -1.72 +/- 0.06 +/- 0.05) Jy at 100 GHz and (0.80 +/- 0.06 +/- 0.06, -1.40 +/- 0.07 +/- 0.08) Jy at 150 GHz, leading to polarization angles and total errors of -30.0 +/- 1.1 degrees and -29.1 +/- 1.7 degrees. These measurements will allow the use of Cen A as a polarized calibration source for future millimeter experiments. △ Less

Submitted 29 July, 2010; v1 submitted 17 August, 2009; originally announced August 2009.

Comments: 9 pages, 8 figures, v2 matches version published in ApJ

Journal ref: ApJ 710:1541-1550, 2010

Improved measurements of the temperature and polarization of the CMB from QUaD

Authors: The QUaD collaboration, M. L. Brown, P. Ade, J. Bock, M. Bowden, G. Cahill, P. G. Castro, S. Church, T. Culverhouse, R. B. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, C. O'Sullivan, L. Piccirillo, C. Pryke, N. Rajguru , et al. (7 additional authors not shown)

Abstract: We present an improved analysis of the final dataset from the QUaD experiment. Using an improved technique to remove ground contamination, we double the effective sky area and hence increase the precision of our CMB power spectrum measurements by ~30% versus that previously reported. In addition, we have improved our modeling of the instrument beams and have reduced our absolute calibration unce… ▽ More We present an improved analysis of the final dataset from the QUaD experiment. Using an improved technique to remove ground contamination, we double the effective sky area and hence increase the precision of our CMB power spectrum measurements by ~30% versus that previously reported. In addition, we have improved our modeling of the instrument beams and have reduced our absolute calibration uncertainty from 5% to 3.5% in temperature. The robustness of our results is confirmed through extensive jackknife tests and by way of the agreement we find between our two fully independent analysis pipelines. For the standard 6-parameter LCDM model, the addition of QUaD data marginally improves the constraints on a number of cosmological parameters over those obtained from the WMAP experiment alone. The impact of QUaD data is significantly greater for a model extended to include either a running in the scalar spectral index, or a possible tensor component, or both. Adding both the QUaD data and the results from the ACBAR experiment, the uncertainty in the spectral index running is reduced by ~25% compared to WMAP alone, while the upper limit on the tensor-to-scalar ratio is reduced from r < 0.48 to r < 0.33 (95% c.l). This is the strongest limit on tensors to date from the CMB alone. We also use our polarization measurements to place constraints on parity violating interactions to the surface of last scattering, constraining the energy scale of Lorentz violating interactions to < 1.5 x 10^{-43} GeV (68% c.l.). Finally, we place a robust upper limit on the strength of the lensing B-mode signal. Assuming a single flat band power between l = 200 and l = 2000, we constrain the amplitude of B-modes to be < 0.57 micro-K^2 (95% c.l.). △ Less

Submitted 29 October, 2009; v1 submitted 5 June, 2009; originally announced June 2009.

Comments: 23 pages, 19 figures, updated to reflect published version

Journal ref: Astrophys.J.705:978-999,2009

Small Angular Scale Measurements of the CMB Temperature Power Spectrum from QUaD

Authors: QUaD collaboration, R. B. Friedman, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, P. G. Castro, S. Church, T. Culverhouse, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, C. O' Sullivan, L. Piccirillo, C. Pryke, N. Rajguru , et al. (7 additional authors not shown)

Abstract: We present measurements of the cosmic microwave background (CMB) radiation temperature anisotropy in the multipole range 2000<ell<3000 from the QUaD telescope's second and third observing seasons. After masking the brightest point sources our results are consistent with the primary LCDM expectation alone. We estimate the contribution of residual (un-masked) radio point sources using a model cali… ▽ More We present measurements of the cosmic microwave background (CMB) radiation temperature anisotropy in the multipole range 2000<ell<3000 from the QUaD telescope's second and third observing seasons. After masking the brightest point sources our results are consistent with the primary LCDM expectation alone. We estimate the contribution of residual (un-masked) radio point sources using a model calibrated to our own bright source observations, and a full simulation of the source finding and masking procedure. Including this contribution slightly improves the chi^2. We also fit a standard SZ template to the bandpowers and see no strong evidence of an SZ contribution, which is as expected for sigma_8 approx 0.8. △ Less

Submitted 30 June, 2009; v1 submitted 27 January, 2009; originally announced January 2009.

Comments: 5 pages, 5 figures, updated beam model, full data release available online (see text), accepted to ApJL

Journal ref: Astrophys.J.700:L187-L191,2009

Cosmological Parameters from the QUaD CMB polarization experiment

Authors: QUaD collaboration, P. G. Castro, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, S. Church, T. Culverhouse, R. B. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, C. Pryke, R. Schwarz, C. O'Sullivan, L. Piccirillo , et al. (7 additional authors not shown)

Abstract: In this paper we present a parameter estimation analysis of the polarization and temperature power spectra from the second and third season of observations with the QUaD experiment. QUaD has for the first time detected multiple acoustic peaks in the E-mode polarization spectrum with high significance. Although QUaD-only parameter constraints are not competitive with previous results for the stan… ▽ More In this paper we present a parameter estimation analysis of the polarization and temperature power spectra from the second and third season of observations with the QUaD experiment. QUaD has for the first time detected multiple acoustic peaks in the E-mode polarization spectrum with high significance. Although QUaD-only parameter constraints are not competitive with previous results for the standard 6-parameter LCDM cosmology, they do allow meaningful polarization-only parameter analyses for the first time. In a standard 6-parameter LCDM analysis we find the QUaD TT power spectrum to be in good agreement with previous results. However, the QUaD polarization data shows some tension with LCDM. The origin of this 1 to 2 sigma tension remains unclear, and may point to new physics, residual systematics or simple random chance. We also combine QUaD with the five-year WMAP data set and the SDSS Luminous Red Galaxies 4th data release power spectrum, and extend our analysis to constrain individual isocurvature mode fractions, constraining cold dark matter density, alpha(cdmi)<0.11 (95 % CL), neutrino density, alpha(ndi)<0.26 (95 % CL), and neutrino velocity, alpha(nvi)<0.23 (95 % CL), modes. Our analysis sets a benchmark for future polarization experiments. △ Less

Submitted 7 January, 2009; originally announced January 2009.

Comments: 8 pages, 5 figures, submitted to ApJ

Journal ref: Astrophys.J.701:857-864,2009

Parity violation constraints using 2006-2007 QUaD CMB polarization spectra

Authors: QUaD Collaboration, E. Y. S. Wu, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, P. G. Castro, S. Church, T. Culverhouse, R. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, L. Piccirillo, C. Pryke, N. Rajguru , et al. (7 additional authors not shown)

Abstract: We constrain parity-violating interactions to the surface of last scattering using spectra from the QUaD experiment's second and third seasons of observations by searching for a possible systematic rotation of the polarization directions of CMB photons. We measure the rotation angle due to such a possible "cosmological birefringence" to be 0.55 deg. +/- 0.82 deg. (random) +/- 0.5 deg. (systemati… ▽ More We constrain parity-violating interactions to the surface of last scattering using spectra from the QUaD experiment's second and third seasons of observations by searching for a possible systematic rotation of the polarization directions of CMB photons. We measure the rotation angle due to such a possible "cosmological birefringence" to be 0.55 deg. +/- 0.82 deg. (random) +/- 0.5 deg. (systematic) using QUaD's 100 and 150 GHz TB and EB spectra over the multipole range 200 < l < 2000, consistent with null, and constrain Lorentz violating interactions to < 2^-43 GeV (68% confidence limit). This is the best constraint to date on electrodynamic parity violation on cosmological scales. △ Less

Submitted 1 April, 2009; v1 submitted 4 November, 2008; originally announced November 2008.

Comments: 4 pages, 2 figures, accepted to Physical Review Letters. Improved method, updated result and clarified language

Journal ref: Phys.Rev.Lett.102:161302,2009

QUaD: A High-Resolution Cosmic Microwave Background Polarimeter

Authors: QUaD collaboration, J. R. Hinderks, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, J. E. Carlstrom, P. G. Castro, S. Church, T. Culverhouse, R. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Harris, V. Haynes, B. G. Keating, J. Kovac, E. Kirby, A. E. Lange, E. Leitch, O. E. Mallie, S. Melhuish, Y. Memari , et al. (14 additional authors not shown)

Abstract: We describe the QUaD experiment, a millimeter-wavelength polarimeter designed to observe the Cosmic Microwave Background (CMB) from a site at the South Pole. The experiment comprises a 2.64 m Cassegrain telescope equipped with a cryogenically cooled receiver containing an array of 62 polarization-sensitive bolometers. The focal plane contains pixels at two different frequency bands, 100 GHz and… ▽ More We describe the QUaD experiment, a millimeter-wavelength polarimeter designed to observe the Cosmic Microwave Background (CMB) from a site at the South Pole. The experiment comprises a 2.64 m Cassegrain telescope equipped with a cryogenically cooled receiver containing an array of 62 polarization-sensitive bolometers. The focal plane contains pixels at two different frequency bands, 100 GHz and 150 GHz, with angular resolutions of 5 arcmin and 3.5 arcmin, respectively. The high angular resolution allows observation of CMB temperature and polarization anisotropies over a wide range of scales. The instrument commenced operation in early 2005 and collected science data during three successive Austral winter seasons of observation. △ Less

Submitted 29 April, 2009; v1 submitted 14 May, 2008; originally announced May 2008.

Comments: 23 pages, author list and text updated to reflect published version

Journal ref: Astrophys.J.692:1221-1246,2009

Second and third season QUaD CMB temperature and polarization power spectra

Authors: QUaD collaboration, C. Pryke, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, P. G. Castro, S. Church, T. Culverhouse, R. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, R. Schwarz, C. O'Sullivan, L. Piccirillo , et al. (7 additional authors not shown)

Abstract: We report results from the second and third seasons of observation with the QUaD experiment. Angular power spectra of the Cosmic Microwave Background are derived for both temperature and polarization at both 100 GHz and 150 GHz, and as cross frequency spectra. All spectra are subjected to an extensive set of jackknife tests to probe for possible systematic contamination. For the implemented data… ▽ More We report results from the second and third seasons of observation with the QUaD experiment. Angular power spectra of the Cosmic Microwave Background are derived for both temperature and polarization at both 100 GHz and 150 GHz, and as cross frequency spectra. All spectra are subjected to an extensive set of jackknife tests to probe for possible systematic contamination. For the implemented data cuts and processing technique such contamination is undetectable. We analyze the difference map formed between the 100 and 150 GHz bands and find no evidence of foreground contamination in polarization. The spectra are then combined to form a single set of results which are shown to be consistent with the prevailing LCDM model. The sensitivity of the polarization results is considerably better than that of any previous experiment -- for the first time multiple acoustic peaks are detected in the E-mode power spectrum at high significance. △ Less

Submitted 24 February, 2009; v1 submitted 14 May, 2008; originally announced May 2008.

Comments: 24 pages, 23 figures, updated to reflect published version

Journal ref: Astrophys.J.692:1247-1270,2009

First season QUaD CMB temperature and polarization power spectra

Authors: QUaD Collaboration, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, J. E. Carlstrom, P. G. Castro, S. Church, T. Culverhouse, R. Friedman, K. Ganga, W. K. Gear, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, J. A. Murphy, A. Orlando, R. Schwarz, C. O'Sullivan, L. Piccirillo, C. Pryke, N. Rajguru , et al. (5 additional authors not shown)

Abstract: QUaD is a bolometric CMB polarimeter sited at the South Pole, operating at frequencies of 100 and 150 GHz. In this paper we report preliminary results from the first season of operation (austral winter 2005). All six CMB power spectra are presented derived as cross spectra between the 100 and 150 GHz maps using 67 days of observation in a low foreground region of approximately 60 square degrees.… ▽ More QUaD is a bolometric CMB polarimeter sited at the South Pole, operating at frequencies of 100 and 150 GHz. In this paper we report preliminary results from the first season of operation (austral winter 2005). All six CMB power spectra are presented derived as cross spectra between the 100 and 150 GHz maps using 67 days of observation in a low foreground region of approximately 60 square degrees. This data is a small fraction of the data acquired to date. The measured spectra are consistent with the LCDM cosmological model. We perform jackknife tests which indicate that the observed signal has negligible contamination from instrumental systematics. In addition by using a frequency jackknife we find no evidence for foreground contamination. △ Less

Submitted 16 May, 2007; originally announced May 2007.

Comments: 7 pages, 5 figures, submitted to ApJ

Journal ref: Astrophys.J.674:22-28, 2008