Showing 1–31 of 31 results for author: Cahen, D

Experimental Evidence for Defect Tolerance in Pb-Halide Perovskites

Authors: Naga Prathibha Jasti, Igal Levine, Yishay Feldman, Gary Hodes, Sigalit Aharon, David Cahen

Abstract: The term defect tolerance (DT) is used often to rationalize the exceptional optoelectronic properties of Halide Perovskites (HaPs) and their devices. Even though DT lacked direct experimental evidence, it became a "fact" in the field. DT in semiconductors implies that structural defects do not translate to electrical and optical effects (e.g., due to charge trap**), associated with such defects.… ▽ More The term defect tolerance (DT) is used often to rationalize the exceptional optoelectronic properties of Halide Perovskites (HaPs) and their devices. Even though DT lacked direct experimental evidence, it became a "fact" in the field. DT in semiconductors implies that structural defects do not translate to electrical and optical effects (e.g., due to charge trap**), associated with such defects. We present the first direct experimental evidence for DT in Pb-HaPs by comparing the structural quality of 2-dimensional (2D), 2D-3D, and 3D Pb-iodide HaP crystals with their optoelectronic characteristics using high-sensitivity methods. Importantly, we get information from the materials' bulk, because we sample at least a few hundred nanometers, up to several micrometers, from the sample's surface, which allows for assessing intrinsic bulk (and not only surface-) properties of HaPs. The results point to DT in 3D, 2D-3D, and 2D Pb-HaPs. Overall, our data provide an experimental basis to rationalize DT in Pb-HaPs. These experiments and findings can guide the search for, and design of other materials with DT. △ Less

Submitted 22 February, 2024; v1 submitted 25 May, 2023; originally announced May 2023.

The pursuit of stability in halide perovskites: the monovalent cation and the key for surface and bulk self-repair

Authors: D R Ceratti, A V Cohen, R Tenne, Y Rakita, L Snarski, L Cremonesi, I Goldian, I Kaplan-Ashiri, T Bendikov, V Kalchenko, M Elbaum, M A C Potenza, L Kronik, G Hodes, D Cahen

Abstract: We find significant differences between degradation and healing at the surface or in the bulk for each of the different APbBr3 single crystals (A=CH3NH3+, methylammonium (MA); HC(NH2)2+, formamidinium (FA); and cesium, Cs+). Using 1- and 2-photon microscopy and photobleaching we conclude that kinetics dominate the surface, and thermodynamics the bulk stability. Fluorescence-lifetime imaging micros… ▽ More We find significant differences between degradation and healing at the surface or in the bulk for each of the different APbBr3 single crystals (A=CH3NH3+, methylammonium (MA); HC(NH2)2+, formamidinium (FA); and cesium, Cs+). Using 1- and 2-photon microscopy and photobleaching we conclude that kinetics dominate the surface, and thermodynamics the bulk stability. Fluorescence-lifetime imaging microscopy, as well as results from several other methods, relate the (damaged) state of the halide perovskite (HaP) after photobleaching to its modified optical and electronic properties. The A cation type strongly influences both the kinetics and the thermodynamics of recovery and degradation: FA heals best the bulk material with faster self-healing; Cs+ protects the surface best, being the least volatile of the A cations and possibly through O-passivation; MA passivates defects via methylamine from photo-dissociation, which binds to Pb2+. DFT simulations not only provide insight into the latter conclusion, but also show the importance and stability of the Br3- defect. These results rationalize the use of mixed A-cation materials for optimizing both solar cell stability and overall performance of HaP-based devices, and provide a basis for designing new HaP variants. △ Less

Submitted 30 September, 2020; originally announced September 2020.

Off-resonant coherent electron transport over three nanometers in multi-heme protein bioelectronic junctions

Authors: Zdenek Futera, Ichiro Ide, Ben Kayser, Kavita Garg, Xiuyun Jiang, Jessica H. van Wonderen, Julea N. Butt, Hisao Ishii, Israel Pecht, Mordechai Sheves, David Cahen, Jochen Blumberger

Abstract: Multi-heme cytochromes (MHC) are fascinating proteins used by bacterial organisms to shuttle electrons within and between their cells. When placed in a solid state electronic junction, they support temperature-independent currents over several nanometers that are three orders of magnitude higher compared to other redox proteins of comparable size. To gain microscopic insight into their astonishing… ▽ More Multi-heme cytochromes (MHC) are fascinating proteins used by bacterial organisms to shuttle electrons within and between their cells. When placed in a solid state electronic junction, they support temperature-independent currents over several nanometers that are three orders of magnitude higher compared to other redox proteins of comparable size. To gain microscopic insight into their astonishingly high conductivities, we present herein the first current-voltage calculations of its kind, for a MHC sandwiched between two Au(111) electrodes, complemented by photo-emission spectroscopy experiments. We find that conduction proceeds via off-resonant coherent tunneling mediated by a large number of protein valence-band orbitals that are strongly delocalized over heme and protein residues, effectively "gating" the current between the two electrodes. This picture is profoundly different from the dominant electron hop** mechanism supported by the same protein in aqueous solution. Our results imply that current output in MHC junctions could be even further increased in the resonant regime, e.g. by application of a gate voltage, making these proteins extremely interesting for next-generation bionanoelectronic devices. △ Less

Submitted 20 July, 2020; originally announced July 2020.

Comments: 18 pages, 5 figures

Pitfalls and prospects of optical spectroscopy to characterize perovskite-transport layer interfaces

Authors: Eline M. Hutter, Thomas Kirchartz, Bruno Ehrler, David Cahen, Elizabeth von Hauff

Abstract: Perovskite photovoltaics has witnessed an unprecedented increase in power conversion efficiency over the last decade. The choice of transport layers, through which photo-generated electrons and holes are transported to the electrodes, is a crucial factor for further improving both the device performance and stability. In this perspective, we critically examine the application of optical spectrosco… ▽ More Perovskite photovoltaics has witnessed an unprecedented increase in power conversion efficiency over the last decade. The choice of transport layers, through which photo-generated electrons and holes are transported to the electrodes, is a crucial factor for further improving both the device performance and stability. In this perspective, we critically examine the application of optical spectroscopy to characterize the quality of the transport layer-perovskite interface. We highlight the power of complementary studies that use both continuous wave (cw) and time-resolved photoluminescence (PL) to understand non-radiative losses, and additional transient spectroscopies for characterizing the potential for loss-less carrier extraction at the solar cell interfaces. Based on this discussion, we make recommendations on how to extrapolate results from optical measurements to assess the quality of a transport layer, and its impact on solar cell efficiency. △ Less

Submitted 22 December, 2019; originally announced December 2019.

Journal ref: Applied Physics Letters 116, 100501 (2020)

Requirements for functional pn-homojunctions in lead-halide perovskite solar cells

Authors: Thomas Kirchartz, David Cahen

Abstract: Cui et al. describe the fabrication and characterization of planar pn-junction solar cells based on lead-halide perovskites. The do** densities measured using Hall effect measurements vary from $N_D = 10^{12} cm^{-3}$ to $8\times 10^{12} cm^{-3}$ for the solution-processed n-type layer and $N_A = 8\times 10^9 cm^{-3}$ for the evaporated p-type layer. While these devices outperform their counterp… ▽ More Cui et al. describe the fabrication and characterization of planar pn-junction solar cells based on lead-halide perovskites. The do** densities measured using Hall effect measurements vary from $N_D = 10^{12} cm^{-3}$ to $8\times 10^{12} cm^{-3}$ for the solution-processed n-type layer and $N_A = 8\times 10^9 cm^{-3}$ for the evaporated p-type layer. While these devices outperform their counterparts, that are supposedly un-doped, the results raise three important questions: (i) Are the reported do** densities high enough to change the electrostatic potential distribution in the device from that for the un-doped ones, (ii) are the do** densities high enough for the pn-junction to remain intact under typical photovoltaic operation conditions and (iii) is a pn-junction beneficial for photovoltaic performance given the typical properties of lead-halide perovskites. △ Less

Submitted 25 July, 2019; originally announced July 2019.

Type and Degree of Covalence: Empirical Derivation and Implications

Authors: Yevgeny Rakita, Thomas Kirchartz, Gary Hodes, David Cahen

Abstract: The way atoms attach to each other defines the function(s), e.g., mechanical, optical, electronic, of a given material. The nature of the chemical bond is, therefore, one of the most fundamental issues in materials. Both ionic interactions, i.e., resulting from electrical charges associated with the atoms, and covalent ones, i.e., the sharing of electrons between nuclei of different atoms, are usu… ▽ More The way atoms attach to each other defines the function(s), e.g., mechanical, optical, electronic, of a given material. The nature of the chemical bond is, therefore, one of the most fundamental issues in materials. Both ionic interactions, i.e., resulting from electrical charges associated with the atoms, and covalent ones, i.e., the sharing of electrons between nuclei of different atoms, are usually viewed as forces that attract between atoms to form a rigid structure. Although less common for solid materials, it was shown theoretically to be possible for covalent interactions at the chemically-active electronic shell (or valence-band maximum) of semiconductors to reverse their more common nature and become repulsive, i.e., act against bonding. Some semiconductors with such predicted anti-bonding valence-band maximum levels (such as halide perovskites) show experimentally some amazing (opto-) electronic properties. Predictions that anti-bonding character can allow tolerance for existing defects, at least in part, can explain the superior properties of such semiconductors. Although there are known experimental ways to estimate the degree of the covalent nature (e.g., electronegativity), this was not possible hitherto for the type, i.e., distinguishing whether a material exhibits bonding or anti-bonding covalent interactions. We have developed a simple way to reveal the complete nature (both type and degree) of chemical bonds, using experimental data. After confirming our development with classical models and theoretical predictions, with a set of ~40 different functional semi-conductors, we show how knowledge of the complete nature of covalent bonding is of critical importance for fundamental properties of semiconductors. △ Less

Submitted 8 July, 2019; originally announced July 2019.

Comments: 25 Pages, 8 figures, ESI follows the main text. References are at the end of the ESI

Solar Energy Conversion and the Shockley-Queisser Model, a Guide for the Perplexed

Authors: Jean-Francois Guillemoles, Thomas Kirchartz, David Cahen, Uwe Rau

Abstract: The Shockley-Queisser model is a landmark in photovoltaic device analysis by defining an ideal situation as reference for actual solar cells. However, the model and its implications are easily misunderstood. Thus, we present a guide to help understand and avoid misinterpreting it. Focusing on the five assumptions, underlying the model, we define figures of merit to quantify how close real solar ce… ▽ More The Shockley-Queisser model is a landmark in photovoltaic device analysis by defining an ideal situation as reference for actual solar cells. However, the model and its implications are easily misunderstood. Thus, we present a guide to help understand and avoid misinterpreting it. Focusing on the five assumptions, underlying the model, we define figures of merit to quantify how close real solar cells approach each of these assumptions. △ Less

Submitted 28 March, 2019; originally announced March 2019.

Journal ref: Nature Photonics, volume 13, page 501 (2019)

Halide perovskites: Is it all about the interfaces?

Authors: Philip Schulz, David Cahen, Antoine Kahn

Abstract: Design and modification of the interfaces, always a critical issue for semiconductor devices, has become the primary tool to harness the full potential of halide perovskite (HaP)-based ones. In particular the outstanding improvements in HaP solar cell performance and stability can be primarily ascribed to a careful choice of the interfacial layout in the layer stack. In this review we describe the… ▽ More Design and modification of the interfaces, always a critical issue for semiconductor devices, has become the primary tool to harness the full potential of halide perovskite (HaP)-based ones. In particular the outstanding improvements in HaP solar cell performance and stability can be primarily ascribed to a careful choice of the interfacial layout in the layer stack. In this review we describe the unique challenges and opportunities of these approaches (section A). For this purpose, we first elucidate the basic physical and chemical properties of the exposed HaP thin film and crystal surface (section B). We then lay out the energetic alignment processes to adjacent transport and buffer layers (section C) and finally elaborate on the impact of the interface formation on how well/poor a device functions. Based on those sections we then present a road map for the next steps in interfacial design principles for HaP semiconductors (section D). △ Less

Submitted 12 December, 2018; originally announced December 2018.

Between Structure and Performance in Halide Perovskites for Photovoltaic Applications: the Role of Defects

Authors: Yevgeny Rakita, David Cahen, Gary Hodes

Abstract: My study is about Halide Perovskites (HaPs) and focuses the fundamental structural, chemical and dielectric properties of HaPs in reference to their PV-related properties. * I present my main research model: HaP single-crystals - their growth and characterization; * I start by exploring the bond nature of HaPs using Nanoindentation and Solid-State NMR techniques. * I explore the 'deformation… ▽ More My study is about Halide Perovskites (HaPs) and focuses the fundamental structural, chemical and dielectric properties of HaPs in reference to their PV-related properties. * I present my main research model: HaP single-crystals - their growth and characterization; * I start by exploring the bond nature of HaPs using Nanoindentation and Solid-State NMR techniques. * I explore the 'deformation potential' of the structure and show that its low and positive value in HaPs strongly suggests a pronounced 'defect tolerance'. * I explore the scattering mechanism of charges in the soft and highly polarizable system such as HaPs, and show that its low mobility (relative to other heteropolar systems) is fundamental and cannot be improved. I also show that a positive 'deformation potential' (so the valence band is 'anti-bonding', where a system should promote 'defect-tolerance') is something that is common to other highly polarizable systems, such as AgX, and Pb-chalcogenides. * I explore the chemistry of the system and show that HaPs can easily break to constituents, but also easily be made by the same constituents, suggesting a low activation energy for annealing process to take care even at RT. This RT annealing can promote 'self-healing' at ~second to ~minute time-scale, which we clearly observe. We find 'entropic-stabilization' to be very important in 'self-healing' processes of that kind. * I explore the importance of symmetry breaking in the HaP structure, which can induce a polar - and thus Ferroelectric - structure. We conclude that Ferroelectricity is not a fundamental property of HaPs, since it doesn't exist in MAPbBr3, but only in MAPbI3 - as proven unambiguously - and what is present in MAPbI3 is in doubt important for photovoltaics, when using them at RT or above. Due to compression, if you find a low-quality figure you want- please email me. △ Less

Submitted 28 September, 2018; originally announced September 2018.

Comments: PhD thesis

Can we use time-resolved measurements to get Steady-State Transport data for Halide perovskites?

Authors: Igal Levine, Satyajit Gupta, Achintya Bera, Davide Ceratti, Gary Hodes, David Cahen, Dengyang Guo, Tom J. Savenije, Jorge Avila, Henk J. Bolink, Oded Millo, Doron Azulay, Isaac Balberg

Abstract: Time-resolved, pulsed excitation methods are widely used to deduce optoelectronic properties of semiconductors, including now also Halide Perovskites (HaPs), especially transport properties. Howev-er, as yet no evaluation of their amenability and justification for the use of the results for the above-noted purposes has been reported. To check if we can learn from pulsed measurement results about s… ▽ More Time-resolved, pulsed excitation methods are widely used to deduce optoelectronic properties of semiconductors, including now also Halide Perovskites (HaPs), especially transport properties. Howev-er, as yet no evaluation of their amenability and justification for the use of the results for the above-noted purposes has been reported. To check if we can learn from pulsed measurement results about steady-state phototransport properties, we show here that, although pulsed measurements can be useful to extract information on the recombination kinetics of HaPs, great care should be taken. One issue is that no changes in the material are induced during or as a result of the excitation, and another one concerns in how far pulsed excitation-derived data can be used to find relevant steady-state pa-rameters. To answer the latter question, we revisited pulsed excitation, and propose a novel way to compare between pulsed and steady state measurements at different excitation intensities. We per-formed steady-state photoconductivity and ambipolar diffusion length measurements, as well as pulsed TR-MC and TR-PL measurements as function of excitation intensity on the same samples of dif-ferent MAPbI3 thin films, and find good quasi-quantitative agreement between the results, explaining them with a generalized single level recombination model that describes the basic physics of photo-transport of HaP absorbers. Moreover, we find the first experimental manifestation of the boundaries between several effective recombination regimes that exist in HaPs, by analyzing their phototransport behavior as a function of excitation intensity. △ Less

Submitted 1 May, 2018; originally announced May 2018.

Tetragonal CH3NH3PbI3 Is Ferroelectric

Authors: Yevgeny Rakita, Omri Bar-Elli, Elena Meirzadeh, Hadar Kaslasi, Yagel Peleg, Gary Hodes, Igor Lubo-mirsky, Dan Oron, David Ehre, David Cahen

Abstract: Halide perovskite (HaP) semiconductors are revolutionizing photovoltaic (PV) solar energy conversion by showing remarkable performance of solar cells made with esp. tetragonal methylammonium lead tri-iodide (MAPbI3). In particular, the low voltage loss of these cells implies a remarkably low recombination rate of photogenerated carriers. It was suggested that low recombination can be due to spatia… ▽ More Halide perovskite (HaP) semiconductors are revolutionizing photovoltaic (PV) solar energy conversion by showing remarkable performance of solar cells made with esp. tetragonal methylammonium lead tri-iodide (MAPbI3). In particular, the low voltage loss of these cells implies a remarkably low recombination rate of photogenerated carriers. It was suggested that low recombination can be due to spatial separation of electrons and holes, a possibility if MAPbI3 is a semiconducting ferroelectric, which, however, requires clear experimental evidence. As a first step we show that, in operando, MAPbI3 (unlike MAPbBr3) is pyroelectric, which implies it can be ferroelectric. The next step, proving it is (not) ferroelectric, is challenging, because of the material s relatively high electrical conductance (a consequence of an optical band gap suitable for PV conversion!) and low stability under high applied bias voltage. This excludes normal measurements of a ferroelectric hysteresis loop to prove ferroelctricity s hallmark for switchable polarization. By adopting an approach suitable for electrically leaky materials as MAPbI3, we show here ferroelectric hysteresis from well-characterized single crystals at low temperature (still within the tetragonal phase, which is the room temperature stable phase). Using chemical etching, we also image polar domains, the structural fingerprint for ferroelectricity, periodically stacked along the polar axis of the crystal, which, as predicted by theory, scale with the overall crystal size. We also succeeded in detecting clear second-harmonic generation, direct evidence for the material s non-centrosymmetry. We note that the material s ferroelectric nature, can, but not obviously need to be important in a PV cell, operating around room temperature. △ Less

Submitted 17 February, 2017; originally announced February 2017.

Comments: Abstract (p:1), Main text [Includes 7 figures] (P:2-13), References (p:14-17), Supporting information (p:18-36)

Protein bioelectronics: a review of what we do and do not know

Authors: Christopher D. Bostick, Sabyasachi Mukhopadhyay, Israel Pecht, Mordechai Sheves, David Cahen, David Lederman

Abstract: We review the status of protein-based molecular electronics. First we discuss fundamental concepts of electron transfer and transport in and across proteins and proposed mechanisms for these processes. We then describe the immobilization of proteins to solid-state surfaces in both nanoscale and macroscopic approaches, and highlight how different methodologies can alter protein electronic propertie… ▽ More We review the status of protein-based molecular electronics. First we discuss fundamental concepts of electron transfer and transport in and across proteins and proposed mechanisms for these processes. We then describe the immobilization of proteins to solid-state surfaces in both nanoscale and macroscopic approaches, and highlight how different methodologies can alter protein electronic properties. Because immobilizing proteins while retaining biological activity is crucial to the successful development of bioelectronic devices, we discuss this process at length. We briefly discuss computational predictions and their link to experimental results. We then summarize how the biological activity of immobilized proteins is beneficial for bioelectronics devices, and how conductance measurements can shed light on protein properties. Finally, we consider how the research to date could influence the development of future bioelectronics devices. △ Less

Submitted 4 August, 2017; v1 submitted 16 February, 2017; originally announced February 2017.

Comments: 155 pages, 38 figures

Self-Repairing Energy Materials: Sine Qua Non for a Sustainable Future

Authors: David Cahen, Igor Lubomirky

Abstract: Materials are central to our way of life and future. Energy and materials as resources are connected and the obvious connections between them are the energy cost of materials and the materials cost of energy. For both of these resilience of the materials is critical; thus a major goal of future chemistry should be to find materials for energy that can last longer, i.e., design principles for self-… ▽ More Materials are central to our way of life and future. Energy and materials as resources are connected and the obvious connections between them are the energy cost of materials and the materials cost of energy. For both of these resilience of the materials is critical; thus a major goal of future chemistry should be to find materials for energy that can last longer, i.e., design principles for self-repair in these. △ Less

Submitted 10 February, 2017; originally announced February 2017.

Comments: Going to be published next month: Cahen-Lubomirski, Acc Chem Res. Holy Grail issue Revised 1-2017

Molecular Electronics by Chemical Modification of Semiconductor Surfaces

Authors: Ayelet Vilan, David Cahen

Abstract: Inserting molecular monolayers within metal / semiconductor interfaces provides one of the most powerful expressions of how minute chemical modifications can affect electronic devices. This topic also has direct importance for technology as it can help improve the efficiency of a variety of electronic devices such as solar cells, LEDs, sensors and possible future bioelectronic devices, which are b… ▽ More Inserting molecular monolayers within metal / semiconductor interfaces provides one of the most powerful expressions of how minute chemical modifications can affect electronic devices. This topic also has direct importance for technology as it can help improve the efficiency of a variety of electronic devices such as solar cells, LEDs, sensors and possible future bioelectronic devices, which are based mostly on non-classical semiconducting materials (section 1). The review covers the main aspects of using chemistry to - control alignment of energy levels at interfaces (section 2): - passivate interface states (section 3), - insert molecular dipoles at interfaces (section 4), - induce charge rearrangement at and around interfaces (section 5). After setting the stage, we consider the unique current-voltage characteristics that result from transport across metal / molecular monolayer / semiconductor interfaces. Here we focus on the interplay between the monolayer as tunneling barrier on the one hand, and the electrostatic barrier within the semiconductor, due to its space-charge region (section 6), on the other hand, as well as how different monolayer chemistries control each of the these barriers. Section 7 provides practical tools to experimentally identify these two barriers, and distinguish between them, after which section 8 concludes the story with a summary and a view to the future. While this review is concerned with hybrid semiconductor / molecular effects (see Refs. 1,2 for earlier reviews on this topic), issues related to formation of monolayers and contacts, as well as charge transport that is solely dominated by molecules, have been reviewed elsewhere[3-6], including by us recently[7]. △ Less

Submitted 11 December, 2016; originally announced December 2016.

Large-area, ensemble molecular electronics: Motivation and challenges

Authors: Ayelet Vilan, Dinesh Aswal, David Cahen

Abstract: We review charge transport across molecular monolayers, which is central to molecular electronics (MoE) using large-area junctions (NmJ). We strive to provide a wide conceptual overview of three main sub-topics. First, a broad introduction places NmJ in perspective to related fields of research, and to single molecule junctions (1mJ), in addition to a brief historical account. As charge transport… ▽ More We review charge transport across molecular monolayers, which is central to molecular electronics (MoE) using large-area junctions (NmJ). We strive to provide a wide conceptual overview of three main sub-topics. First, a broad introduction places NmJ in perspective to related fields of research, and to single molecule junctions (1mJ), in addition to a brief historical account. As charge transport presents an ultra sensitive probe for the electronic perfection of interfaces, in the second part ways to form both the monolayer and the contacts are described to construct reliable, defect-free interfaces. The last part is dedicated to understanding and analyses of current-voltage (I-V) traces across molecular junctions. Notwithstanding the original motivation of MoE, I-V traces are often not very sensitive to molecular details and then provide a poor probe for chemical information. Instead we focus on how to analyse the net electrical performance of molecular junctions, from a functional device perspective. Finally, we shortly point to creation of a built-in electric field as a key to achieve functionality, including non-linear current-voltage characteristics that originate in the molecules or their contacts to the electrodes. △ Less

Submitted 24 December, 2016; v1 submitted 11 December, 2016; originally announced December 2016.

Temperature-dependent Hysteresis in MAPbI3 Solar Cells

Authors: Igal Levine, Pabitra K. Nayak, Jacob Tse-Wei Wang, Nobuya Sakai, Stephan Van Reenen, Thomas M. Brenner, Sabyasachi Mukhopadhyay, Henry J. Snaith, Gary Hodes, David Cahen

Abstract: Hysteresis in the current-voltage characteristics of hybrid organic-inorganic perovskite-based solar cells is one of the fundamental aspects of these cells that we do not understand well. One possible cause, suggested for the hysteresis, is polarization of the perovskite layer under applied voltage and illumination bias, due to ion migration within the perovskite. To study this problem systemicall… ▽ More Hysteresis in the current-voltage characteristics of hybrid organic-inorganic perovskite-based solar cells is one of the fundamental aspects of these cells that we do not understand well. One possible cause, suggested for the hysteresis, is polarization of the perovskite layer under applied voltage and illumination bias, due to ion migration within the perovskite. To study this problem systemically current-voltage characteristics of both regular (light incident through the electron conducting contact) and so-called inverted (light incident through the hole conducting contact) perovskite cells were studied at different temperatures and scan rates. We explain our results by assuming that the effects of scan rate and temperature on hysteresis are strongly correlated to ion migration within the device, with the rate-determining step being ion migration at/across the interfaces of the perovskite layer with the contact materials. By correlating between the scan rate with the measurement temperature we show that the inverted and regular cells operate in different hysteresis regimes, with different activation energies of 0.28+-0.04 eV and 0.59+-0.09 eV, respectively. We suggest that the differences, observed between the two architectures are due to different rates of ion migration close to the interfaces, and conclude that the diffusion coefficient of migrating ions in the inverted cells is 3 orders of magnitude higher than in the regular cells, leading to different accumulation rates of ions near the interfaces. Analysis of VOC as a function of temperature shows that the main recombination mechanism is trap-assisted (Shockley-Read Hall, SRH) in the space charge region, similar to what is the case for other thin film inorganic solar cells. △ Less

Submitted 13 April, 2016; originally announced April 2016.

Comments: 47 pages including supplementary information

Journal ref: JPCL C 120.30 , 2016, 16399-16411

Cesium Enhances Long-Term Stability of Lead Bromide Perovskite-Based Solar Cells

Authors: Michael Kulbak, Satyajit Gupta, Nir Kedem, Igal Levine, Tatyana Bendikov, Gary Hodes, David Cahen

Abstract: Direct comparison between perovskite-structured hybrid organic-inorganic - methyl ammonium lead bromide (MAPbBr3) and all-inorganic cesium lead bromide (CsPbBr3), allows identifying possible fundamental differences in their structural, thermal and electronic characteristics. Both materials possess a similar direct optical band-gap, but CsPbBr3 demonstrates a higher thermal stability than MAPbBr3.… ▽ More Direct comparison between perovskite-structured hybrid organic-inorganic - methyl ammonium lead bromide (MAPbBr3) and all-inorganic cesium lead bromide (CsPbBr3), allows identifying possible fundamental differences in their structural, thermal and electronic characteristics. Both materials possess a similar direct optical band-gap, but CsPbBr3 demonstrates a higher thermal stability than MAPbBr3. In order to compare device properties we fabricated solar cells, with similarly synthesized MAPbBr3 or CsPbBr3, over mesoporous titania scaffolds. Both cell types demonstrated comparable photovoltaic performances under AM1.5 illumination, reaching power conversion efficiencies of ~6 % with a poly-aryl amine-based derivative as hole transport material. Further analysis shows that Cs-based devices are as efficient as, and more stable than methyl ammonium-based ones, after aging (storing the cells for 2 weeks in a dry (relative humidity 15-20%) air atmosphere in the dark) for 2 weeks, under constant illumination (at maximum power), and under electron beam irradiation. △ Less

Submitted 24 November, 2015; originally announced November 2015.

Are Mobilities in Hybrid Organic-Inorganic Halide Perovskites Actually 'High'?

Authors: Thomas M. Brenner, David A. Egger, Andrew M. Rappe, Leeor Kronik, Gary Hodes, David Cahen

Abstract: We present an experimental and theoretical viewpoint on the electronic carrier mobilities of typical hybrid organic-inorganic perovskites (HOIPs). While these mobilities are often quoted as high, a review of them shows that although otherwise the semiconducting properties of HOIPs are impressively good, mobilities of HOIPs used in most solar cells are actually not that high. This is especially app… ▽ More We present an experimental and theoretical viewpoint on the electronic carrier mobilities of typical hybrid organic-inorganic perovskites (HOIPs). While these mobilities are often quoted as high, a review of them shows that although otherwise the semiconducting properties of HOIPs are impressively good, mobilities of HOIPs used in most solar cells are actually not that high. This is especially apparent if they are compared to those of inorganic semiconductors used in other high efficiency solar cells. We critically examine possible causes and focus on electron-lattice coupling mechanisms that are active at room temperature, and can lead to carrier scattering. From this, we propose scattering due to acoustic phonons or polarons as possible causes, but also point out the difficulties with each of these in view of additional experimental and theoretical findings in the literature. Further research in this direction will contribute to making HOIP solar cells even more efficient than they already are. △ Less

Submitted 29 October, 2015; originally announced October 2015.

Mechanical Properties of APbX3 (A=Cs or CH3NH3; X=I or Br) Perovskite Single Crystals

Authors: Yevgeny Rakita, Sidney R. Cohen, Nir Klein Kedem, Gary Hodes, David Cahen

Abstract: The remarkable optoelectronic, and especially photovoltaic performance of hybrid-organic-inorganic perovskite (HOIP) materials drives efforts to connect materials properties to this performance. From nano-indentation experiments on solution-grown single crystals we obtain elastic modulus and nano-hardness values of APbX3 (A = Cs, CH3NH3 and X = I, Br). The Youngs moduli are about 14, 19.5 and 16 G… ▽ More The remarkable optoelectronic, and especially photovoltaic performance of hybrid-organic-inorganic perovskite (HOIP) materials drives efforts to connect materials properties to this performance. From nano-indentation experiments on solution-grown single crystals we obtain elastic modulus and nano-hardness values of APbX3 (A = Cs, CH3NH3 and X = I, Br). The Youngs moduli are about 14, 19.5 and 16 GPa, for CH3NH3PbI3, CH3NH3PbBr3 and CsPbBr3, respectively, lending credence to theoretically calculated values. We discuss possible relevance of our results to suggested self-healing, ion diffusion and ease of manufacturing. Using our results, together with literature data on elastic moduli, we classified HOIPs amongst relevant materials groups, based on their elasto-mechanical properties. △ Less

Submitted 17 August, 2015; originally announced August 2015.

Comments: 20 pages (including 4 pages of Supporting Information after the references), 3 figures (+3 in the Supporting Information), 2 tables (+1 in the Supporting Information)

Journal ref: MRS Communications, 5, 623-629 (2015)

Mode-selective vibrational control of charge transport in $π$-conjugated molecular materials

Authors: Artem A. Bakulin, Robert Lovrinčić, Yu Xi, Oleg Selig, Huib J. Bakker, Yves L. A. Rezus, Pabitra K. Nayak, Alexandr Fonari, Veaceslav Coropceanu, Jean-Luc Brédas, David Cahen

Abstract: The soft character of organic materials leads to strong coupling between molecular nuclear and electronic dynamics. This coupling opens the way to control charge transport in organic electronic devices by inducing molecular vibrational motions. However, despite encouraging theoretical predictions, experimental realization of such control has remained elusive. Here we demonstrate experimentally tha… ▽ More The soft character of organic materials leads to strong coupling between molecular nuclear and electronic dynamics. This coupling opens the way to control charge transport in organic electronic devices by inducing molecular vibrational motions. However, despite encouraging theoretical predictions, experimental realization of such control has remained elusive. Here we demonstrate experimentally that photoconductivity in a model organic optoelectronic device can be controlled by the selective excitation of molecular vibrations. Using an ultrafast infrared laser source to create a coherent superposition of vibrational motions in a pentacene/C60 photoresistor, we observe that excitation of certain modes in the 1500-1700 cm$^{-1}$ region leads to photocurrent enhancement. Excited vibrations affect predominantly trapped carriers. The effect depends on the nature of the vibration and its mode-specific character can be well described by the vibrational modulation of intermolecular electronic couplings. Vibrational control thus presents a new tool for studying electron-phonon coupling and charge dynamics in (bio)molecular materials. △ Less

Submitted 2 March, 2015; originally announced March 2015.

Journal ref: Nature Communications 6, 7880, 2015

Why Lead Methylammonium tri-IODIDE perovskite-based solar cells requires a mesoporous electron transporting scaffold (but not necessarily a hole conductor)

Authors: Eran Edri, Saar Kirmayer, Alex Henning, Sabyasachi Mukhopadhyay, Konstantin Gartsman, Yossi Rosenwaks, Gary Hodes, David Cahen

Abstract: CH3NH3PbI3-based solar cells were characterized with electron beam-induced current (EBIC), and compared to CH3NH3PbI3-xClx ones. A spatial map of charge separation efficiency in working cells shows p-i-n structures for both thin film cells. Effective diffusion lengths, LD, (from EBIC profile) show that holes are extracted significantly more efficiently than electrons in CH3NH3PbI3, explaining why… ▽ More CH3NH3PbI3-based solar cells were characterized with electron beam-induced current (EBIC), and compared to CH3NH3PbI3-xClx ones. A spatial map of charge separation efficiency in working cells shows p-i-n structures for both thin film cells. Effective diffusion lengths, LD, (from EBIC profile) show that holes are extracted significantly more efficiently than electrons in CH3NH3PbI3, explaining why CH3NH3PbI3-based cells require mesoporous electron conductors, while CH3NH3PbI3-xClx ones, where LD values are comparable for both charge types, do not. △ Less

Submitted 12 January, 2014; originally announced January 2014.

Comments: 18 pages, 6 figured, submitted to Nano Letters on December 2nd, 2013

A permanent, stable, and simple top-contact for molecular electronics on Si: Pb evaporated on organic monolayers

Authors: Robert Lovrinčić, Olga Kraynis, Rotem Har-Lavan, Abd-Elrazek Haj-Yahya, Wenjie Li, Ayelet Vilan, David Cahen

Abstract: We show that thermally evaporated lead (Pb) preserves the electronic properties of organic monolayers on Si and the surface passivation of the Si surface itself. The obtained current-voltage characteristics are in accordance with results from the well-established hanging mercury drop method and preserve both the molecule-induced dipolar effect and length-attenuation of current. We rationalize our… ▽ More We show that thermally evaporated lead (Pb) preserves the electronic properties of organic monolayers on Si and the surface passivation of the Si surface itself. The obtained current-voltage characteristics are in accordance with results from the well-established hanging mercury drop method and preserve both the molecule-induced dipolar effect and length-attenuation of current. We rationalize our findings by the lack of interaction between the Pb and the Si substrate. Our method is fast, scalable, compatible to standard semiconductor processing, and can help to spur the large-scale utilization of silicon-organic hybrid electronics. △ Less

Submitted 9 November, 2012; originally announced November 2012.

Aluminum oxide n Si field effect inversion layer solar cells with organic top contact

Authors: A. S. Erickson, N. K. Kedem, A. E. Haj-Yahia, D. Cahen

Abstract: We demonstrate a novel type of solar cell, one that uses fixed negative charges, formed at the interface of n-Si with Al2O3, to generate strong inversion at the Si surface by electrostatic repulsion. Built-in voltages of up to 755 mV are found at this interface. To be able to harness this large built-in voltage, we demonstrate a new photovoltaic device concept, where the photocurrent, generated in… ▽ More We demonstrate a novel type of solar cell, one that uses fixed negative charges, formed at the interface of n-Si with Al2O3, to generate strong inversion at the Si surface by electrostatic repulsion. Built-in voltages of up to 755 mV are found at this interface. To be able to harness this large built-in voltage, we demonstrate a new photovoltaic device concept, where the photocurrent, generated in this inversion layer, is extracted via an inversion layer induced by a high work function PEDOT:PSS top contact, deposited on top of a passivating and dipole-inducing molecular monolayer. Results of the effect of the molecular monolayer on device performance yield open-circuit voltages of up to 550 mV for moderately doped Si, demonstrating the effectiveness of this contact structure in removing the Fermi level pinning that has hindered past efforts in develo** this type of solar cell with n-type Si. △ Less

Submitted 3 December, 2012; v1 submitted 13 September, 2012; originally announced September 2012.

Comments: 19 pages, 5 figures

Journal ref: Applied Physics Letters 101, 233901 (2012)

Do** Human Serum Albumin with Retinoate Markedly Enhances Electron Transport Across the Protein

Authors: Nadav Amdursky, Israel Pecht, Mordechai Sheves, David Cahen

Abstract: Electrons can migrate via proteins over distances that are considered long for non-conjugated systems. Proteins' nano-scale dimensions and the enormous flexibility of their structures and chemistry makes them fascinating subjects for investigating the mechanism of their electron transport (ETp) capacity. One particular attractive research direction is that of tuning their ETp efficiency by do**… ▽ More Electrons can migrate via proteins over distances that are considered long for non-conjugated systems. Proteins' nano-scale dimensions and the enormous flexibility of their structures and chemistry makes them fascinating subjects for investigating the mechanism of their electron transport (ETp) capacity. One particular attractive research direction is that of tuning their ETp efficiency by do** them with external small molecules. Here we report that solid-state ETp across human serum albumin (HSA) increases by more than two orders of magnitude upon retinoate (RA) binding to HSA. RA was chosen because optical spectroscopy has provided evidence for the non-covalent binding of at least three RA molecules to HSA and indications for their relative structural positions. The temperature dependence of ETp shows that both the activation energy and the distance-decay constant decrease with increasing RA binding to HSA. Furthermore, the observed transition from temperature-activated ETp above 190K to temperature-independent ETp below this temperature suggests a change in the ETp mechanism with temperature. △ Less

Submitted 22 July, 2012; originally announced July 2012.

Comments: 7 pages, 3 figures 5 Supplementary figures

Marked changes in electron transport through the blue copper protein azurin in the solid state upon deuteration

Authors: Nadav Amdursky, Israel Pecht, Mordechai Sheves, David Cahen

Abstract: Measuring electron transport (ETp) across proteins in the solid-state offers a way to study electron transfer (ET) mechanism(s) that minimizes solvation effects on the process. Solid state ETp is sensitive to any static (conformational) or dynamic (vibrational) changes in the protein. Our macroscopic measurement technique extends the use of ETp meas-urements down to low temperatures and the concom… ▽ More Measuring electron transport (ETp) across proteins in the solid-state offers a way to study electron transfer (ET) mechanism(s) that minimizes solvation effects on the process. Solid state ETp is sensitive to any static (conformational) or dynamic (vibrational) changes in the protein. Our macroscopic measurement technique extends the use of ETp meas-urements down to low temperatures and the concomitant lower current densities, because the larger area still yields measurable currents. Thus, we reported previously a surprising lack of temperature-dependence for ETp via the blue copper protein azurin (Az), from 80K till denaturation, while ETp via apo-(Cu-free) Az was found to be temperature de-pendent \geq 200K. H/D substitution (deuteration) can provide a potentially powerful means to unravel factors that affect the ETp mechanism at a molecular level. Therefore, we measured and report here the kinetic deuterium isotope effect (KIE) on ETp through holo-Az as a function of temperature (30-340K). We find that deuteration has a striking effect in that it changes ETp from temperature independent to temperature dependent above 180K. This change is expressed in KIE values between 1.8 at 340K and 9.1 at \leq 180K. These values are particularly remarkable in light of the previously reported inverse KIE on the ET in Az in solution. The high values that we obtain for the KIE on the ETp process across the protein monolayer are consistent with a transport mechanism that involves through-(H-containing)-bonds of the β-sheet structure of Az, likely those of am-ide groups. △ Less

Submitted 22 July, 2012; originally announced July 2012.

Comments: 15 pages, 3 figures, 2 Supplementary figures

Temperature and force dependence of nanoscale electron transport via the Cu protein Azurin

Authors: Wenjie Li, Lior Sepunaru, Nadav Amdursky, Sidney R. Cohen, Israel Pecht, Mordechai Sheves, David Cahen

Abstract: The mechanisms of solid-state electron transport (ETp) via a monolayer of immobilized Azurin (Az) was examined by conducting probe atomic force microscopy (CP-AFM), both as function of temperature (248 - 373K) and of applied tip force (6-12 nN). By varying both temperature and force in CP-AFM, we find that the ETp mechanism can alter with a change in the force applied via the tip to the proteins.… ▽ More The mechanisms of solid-state electron transport (ETp) via a monolayer of immobilized Azurin (Az) was examined by conducting probe atomic force microscopy (CP-AFM), both as function of temperature (248 - 373K) and of applied tip force (6-12 nN). By varying both temperature and force in CP-AFM, we find that the ETp mechanism can alter with a change in the force applied via the tip to the proteins. As the applied force increases, ETp via Az changes from temperature-independent to thermally activated at high temperatures. This is in contrast to the Cu-depleted form of Az (apo-Az), where increasing the applied force causes only small quantitative effects, that fit with a decrease in electrode spacing. At low force ETp via holo-Az is temperature-independent and thermally activated via apo-Az. This observation agrees with macroscopic-scale measurements, thus confirming that the difference in ETp dependence on temperature between holo- and apo-Az is an inherent one that may reflect a difference in rigidity between the two forms. An important implication of these results, which depend on CP-AFM measurements over a significant temperature range, is that for ETp measurements on floppy systems, such as proteins, the stress applied to the sample should be kept constant or, at least controlled during measurement. △ Less

Submitted 14 September, 2012; v1 submitted 22 July, 2012; originally announced July 2012.

Comments: 24 pages, 6 figures, plus Supporting Information with 4 pages and 2 figures

Charge transport across metal/molecular (alkyl) monolayer-Si junctions is dominated by the LUMO level

Authors: Omer Yaffe, Yabing Qi, Lior Segev, Luc Scheres, Sreenivasa Reddy Puniredd, Tal Ely, Hossam Haick, Han Zuilhof, Leeor Kronik, Antoine Kahn, Ayelet Vilan, David Cahen

Abstract: We compare the charge transport characteristics of heavy doped p- and n-Si-alkyl chain/Hg junctions. Photoelectron spectroscopy (UPS, IPES and XPS) results for the molecule-Si band alignment at equilibrium show the Fermi level to LUMO energy difference to be much smaller than the corresponding Fermi level to HOMO one. This result supports the conclusion we reach, based on negative differential res… ▽ More We compare the charge transport characteristics of heavy doped p- and n-Si-alkyl chain/Hg junctions. Photoelectron spectroscopy (UPS, IPES and XPS) results for the molecule-Si band alignment at equilibrium show the Fermi level to LUMO energy difference to be much smaller than the corresponding Fermi level to HOMO one. This result supports the conclusion we reach, based on negative differential resistance in an analogous semiconductor-inorganic insulator/metal junction, that for both p- and n-type junctions the energy difference between the Fermi level and LUMO, i.e., electron tunneling, controls charge transport. The Fermi level-LUMO energy difference, experimentally determined by IPES, agrees with the non-resonant tunneling barrier height deduced from the exponential length-attenuation of the current. △ Less

Submitted 26 October, 2011; v1 submitted 20 June, 2011; originally announced June 2011.

Assessing Possibilities & Limits for Solar Cells

Authors: Pabitra K. Nayak, Juan Bisquert, David Cahen

Abstract: This paper has been withdrawn by the authors. This paper has been withdrawn by the authors. △ Less

Submitted 8 March, 2011; v1 submitted 13 February, 2011; originally announced February 2011.

Comments: This paper has been withdrawn by the authors

Proteins as Bioelectronic Materials: Electron Transport Through Solid-State, Protein Monolayer Junctions

Authors: Izhar Ron, Lior Sepunaro, Stella Izhakov, Noga Friedman, Israel Pecht, Mordechai Sheves, David Cahen

Abstract: Electron transfer (ET) through proteins, a fundamental element of many biochemical reactions, has been studied intensively in solution. We report the results of electron transport (ETp) measurements across proteins, sandwiched between two solid electrodes with a long-range goal of understanding in how far protein properties are expressed (and can be utilized) in such a configuration. While most… ▽ More Electron transfer (ET) through proteins, a fundamental element of many biochemical reactions, has been studied intensively in solution. We report the results of electron transport (ETp) measurements across proteins, sandwiched between two solid electrodes with a long-range goal of understanding in how far protein properties are expressed (and can be utilized) in such a configuration. While most such studies to date were conducted with one or just a few molecules in the junction, we present the high yield, reproducible preparation of large area monolayer junctions of proteins from three different families: Azurin (Az), a blue-copper ET protein, Bacteriorhodopsin (bR), a membrane protein-chromophore complex with a proton pum** function, and Bovine Serum Albumin (BSA). Surprisingly, the current-voltage (I-V) measurements on such junctions, which are highly reproducible, show relatively minor differences between Az and bR, even though the latter lacks a known ET function. ETp across both Az and bR is much more efficient than across BSA, but also for the latter the currents are still high, and the decay coefficients too low to be consistent with coherent tunneling. Rather, inelastic hop** is proposed to dominate ETp in these junctions. Other features such as asymmetrical I-V curves and distinct behavior of different proteins can be viewed as molecular signatures in the solid-state conductance. △ Less

Submitted 25 March, 2009; originally announced March 2009.

Molecular electronics at Metal / Semiconductor Junctions Si inversion by Sub-nm Molecular Films

Authors: Omer Yaffe, Luc Scheres, Sreenivasa Reddy Puniredd, Nir Stein, Ariel Biller, Rotem Har Lavan, Hagay Shpaisman, Han Zuilhof, Hossam Haick, David Cahen, Ayelet Vilan

Abstract: Electronic transport across n-Si-alkyl monolayer/Hg junctions is, at reverse and low forward bias, independent of alkyl chain-length from 18 down to 1 or 2 carbons! This and further recent results indicate that electron transport is minority, rather than majority carrier-dominated, occurs via generation and recombination, rather than (the earlier assumed) thermionic emission and, as such is rath… ▽ More Electronic transport across n-Si-alkyl monolayer/Hg junctions is, at reverse and low forward bias, independent of alkyl chain-length from 18 down to 1 or 2 carbons! This and further recent results indicate that electron transport is minority, rather than majority carrier-dominated, occurs via generation and recombination, rather than (the earlier assumed) thermionic emission and, as such is rather insensitive to interface properties. The (m)ethyl results show that binding organic molecules directly to semiconductors provides semiconductor/metal interface control options, not accessible otherwise. △ Less

Submitted 22 March, 2009; originally announced March 2009.

How do electronic carriers cross Si-bound alkyl monolayers?

Authors: Adi Salomon, Olga Girshevitz, David Cahen, Till Bocking, Calvin K. Chan, Fabrice Amy, Antoine Kahn

Abstract: Electron transport through Si-C bound alkyl chains, sandwiched between n-Si and Hg, is characterized by two distinct types of barriers, each dominating in a different voltage range. At low voltage, current depends strongly on temperature but not on molecular length, suggesting transport by thermionic emission over a barrier in the Si. At higher voltage, the current decreases exponentially with m… ▽ More Electron transport through Si-C bound alkyl chains, sandwiched between n-Si and Hg, is characterized by two distinct types of barriers, each dominating in a different voltage range. At low voltage, current depends strongly on temperature but not on molecular length, suggesting transport by thermionic emission over a barrier in the Si. At higher voltage, the current decreases exponentially with molecular length, suggesting tunneling through the molecules. The tunnel barrier is estimated, from transport and photoemission data, to be ~1.5 eV with a 0.25me effective mass. △ Less

Submitted 26 September, 2005; originally announced September 2005.

Comments: 13 pages, 3 figures