-
Surface-emitting electroholographic SAW modulator
Authors:
Joy C. Perkinson,
Michael G. Moebius,
Elizabeth J. Brundage,
William A. Teynor,
Steven J. Byrnes,
James C. Hsiao,
William D. Sawyer,
Dennis M. Callahan,
Ian W. Frank,
John J. LeBlanc,
Gregg E. Favalora
Abstract:
We report the design and operation of a surface-emitting surface acoustic wave (SAW) acousto-optical modulator which behaves as a cm-scale linear hologram in response to an applied electronic waveform. The modulator is formed by an optical waveguide, transducer, and out-coupling surface grating on a 1 mm-thick lithium niobate substrate. We demonstrate the ability to load and illuminate a 9-region…
▽ More
We report the design and operation of a surface-emitting surface acoustic wave (SAW) acousto-optical modulator which behaves as a cm-scale linear hologram in response to an applied electronic waveform. The modulator is formed by an optical waveguide, transducer, and out-coupling surface grating on a 1 mm-thick lithium niobate substrate. We demonstrate the ability to load and illuminate a 9-region linear hologram into the modulator's 8 mm-long interaction region using applied waveforms of 280-320 MHz. To the best of the authors' knowledge, this is the first demonstration of a monolithically-integrated, surface-emitting SAW modulator fabricated using lithographic techniques. Applications include practical implementations of a holographic display.
△ Less
Submitted 17 June, 2019;
originally announced June 2019.
-
Photorefractive second-harmonic detection for ultrasound-modulated optical tomography
Authors:
Steven J. Byrnes
Abstract:
Ultrasound-modulated optical tomography enables sharp 3D optical imaging of tissues and other turbid media, but the light modulation signals are hard to sensitively measure. A common solution, involving photorefractive crystals, enables the measurement of a relatively slow and low-spatial-resolution signal tracking the envelope of the ultrasound wave. We reexamine the photorefractive detection pri…
▽ More
Ultrasound-modulated optical tomography enables sharp 3D optical imaging of tissues and other turbid media, but the light modulation signals are hard to sensitively measure. A common solution, involving photorefractive crystals, enables the measurement of a relatively slow and low-spatial-resolution signal tracking the envelope of the ultrasound wave. We reexamine the photorefractive detection principle both intuitively and quantitatively, and from this analysis we predict that the photodetector should additionally see a fast response at twice the ultrasound frequency, and correspondingly high spatial frequency. The fast and slow response usually have similar amplitudes and reveal complementary information, thus allowing ultrasound-modulated optical tomography to create dramatically sharper tomographic images under the same measurement conditions, integration time, and experimental complexity.
△ Less
Submitted 17 April, 2018;
originally announced April 2018.
-
Multilayer optical calculations
Authors:
Steven J. Byrnes
Abstract:
When light hits a multilayer planar stack, it is reflected, refracted, and absorbed in a way that can be derived from the Fresnel equations. The analysis is treated in many textbooks, and implemented in many software programs, but certain aspects of it are difficult to find explicitly and consistently worked out in the literature. Here, we derive the formulas underlying the transfer-matrix method…
▽ More
When light hits a multilayer planar stack, it is reflected, refracted, and absorbed in a way that can be derived from the Fresnel equations. The analysis is treated in many textbooks, and implemented in many software programs, but certain aspects of it are difficult to find explicitly and consistently worked out in the literature. Here, we derive the formulas underlying the transfer-matrix method of calculating the optical properties of these stacks, including oblique-angle incidence, absorption-vs-position profiles, and ellipsometry parameters. We discuss and explain some strange consequences of the formulas in the situation where the incident and/or final (semi-infinite) medium are absorptive, such as calculating $T>1$ in the absence of gain. We also discuss some implementation details like complex-plane branch cuts. Finally, we derive modified formulas for including one or more "incoherent" layers, i.e. very thick layers in which interference can be neglected. This document was written in conjunction with the "tmm" Python software package, which implements these calculations.
△ Less
Submitted 30 December, 2020; v1 submitted 5 March, 2016;
originally announced March 2016.
-
Designing large, high-efficiency, high-numerical-aperture, transmissive meta-lenses for visible light
Authors:
Steven J. Byrnes,
Alan Lenef,
Francesco Aieta,
Federico Capasso
Abstract:
A metasurface lens (meta-lens) bends light using nanostructures on a flat surface. Macroscopic meta-lenses (mm- to cm-scale diameter) have been quite difficult to simulate and optimize, due to the large area, the lack of periodicity, and the billions of adjustable parameters. We describe a method for designing a large-area meta-lens that allows not only prediction of the efficiency and far-field,…
▽ More
A metasurface lens (meta-lens) bends light using nanostructures on a flat surface. Macroscopic meta-lenses (mm- to cm-scale diameter) have been quite difficult to simulate and optimize, due to the large area, the lack of periodicity, and the billions of adjustable parameters. We describe a method for designing a large-area meta-lens that allows not only prediction of the efficiency and far-field, but also optimization of the shape and position of each individual nanostructure, with a computational cost that is almost independent of the lens size. As examples, we design three large NA=0.94 meta-lenses: One with 79% predicted efficiency for yellow light, one with dichroic properties, and one broadband lens. All have a minimum feature size of 100nm.
△ Less
Submitted 2 March, 2016; v1 submitted 15 November, 2015;
originally announced November 2015.