-
Single-photon detection using high-temperature superconductors
Authors:
I. Charaev,
D. A. Bandurin,
A. T. Bollinger,
I. Y. Phinney,
I. Drozdov,
M. Colangelo,
B. A. Butters,
T. Taniguchi,
K. Watanabe,
X. He,
I. Božović,
P. Jarillo-Herrero,
K. K. Berggren
Abstract:
The detection of individual quanta of light is important for quantum computation, fluorescence lifetime imaging, single-molecule detection, remote sensing, correlation spectroscopy, and more. Thanks to their broadband operation, high detection efficiency, exceptional signal-to-noise ratio, and fast recovery times, superconducting nanowire single-photon detectors (SNSPDs) have become a critical com…
▽ More
The detection of individual quanta of light is important for quantum computation, fluorescence lifetime imaging, single-molecule detection, remote sensing, correlation spectroscopy, and more. Thanks to their broadband operation, high detection efficiency, exceptional signal-to-noise ratio, and fast recovery times, superconducting nanowire single-photon detectors (SNSPDs) have become a critical component in these applications. The operation of SNSPDs based on conventional superconductors, which have a low critical temperature ($T_c$), requires costly and bulky cryocoolers. This motivated exploration of other superconducting materials with higher $T_c$ that would enable single-photon detection at elevated temperatures, yet this task has proven exceedingly difficult. Here we show that with proper processing, high-$T_c$ cuprate superconductors can meet this challenge. We fabricated superconducting nanowires (SNWs) out of thin flakes of Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ and La$_{1.55}$Sr$_{0.45}$CuO$_4$/La$_2$CuO$_4$ (LSCO-LCO) bilayer films and demonstrated their single-photon response up to $25$ and $8$ K, respectively. The single-photon operation is revealed through the linear scaling of the photon count rate (PCR) on the radiation power. Both of our cuprate-based SNSPDs exhibited single-photon sensitivity at the technologically-important $1.5$ $μ$m telecommunications wavelength. Our work expands the family of superconducting materials for SNSPD technology, opens the prospects of raising the temperature ceiling, and raises important questions about the underlying mechanisms of single-photon detection by unconventional superconductors.
△ Less
Submitted 11 August, 2022;
originally announced August 2022.
-
A compact and tunable forward coupler based on high-impedance superconducting nanowires
Authors:
Marco Colangelo,
Di Zhu,
Daniel F. Santavicca,
Brenden A. Butters,
Joshua C. Bienfang,
Karl K. Berggren
Abstract:
Develo** compact, low-dissipation, cryogenic-compatible microwave electronics is essential for scaling up low-temperature quantum computing systems. In this paper, we demonstrate an ultra-compact microwave directional forward coupler based on high-impedance slow-wave superconducting-nanowire transmission lines. The coupling section of the fabricated device has a footprint of…
▽ More
Develo** compact, low-dissipation, cryogenic-compatible microwave electronics is essential for scaling up low-temperature quantum computing systems. In this paper, we demonstrate an ultra-compact microwave directional forward coupler based on high-impedance slow-wave superconducting-nanowire transmission lines. The coupling section of the fabricated device has a footprint of $416\,\mathrm{μm^2}$. At 4.753 GHz, the input signal couples equally to the through port and forward-coupling port (50:50) at $-6.7\,\mathrm{dB}$ with $-13.5\,\mathrm{dB}$ isolation. The coupling ratio can be controlled with DC bias current or temperature by exploiting the dependence of the kinetic inductance on these quantities. The material and fabrication-process are suitable for direct integration with superconducting circuits, providing a practical solution to the signal distribution bottlenecks in develo** large-scale quantum computers.
△ Less
Submitted 23 November, 2020;
originally announced November 2020.
-
Single-Photon Single-Flux Coupled Detectors
Authors:
Murat Onen,
Marco Turchetti,
Brenden A. Butters,
Mina R. Bionta,
Phillip D. Keathley,
Karl K. Berggren
Abstract:
In this work, we present a novel device that is a combination of a superconducting nanowire single-photon detector and a superconducting multi-level memory. We show that these devices can be used to count the number of detections through single-photon to single-flux conversion. Electrical characterization of the memory properties demonstrates single-flux quantum (SFQ) separated states. Optical mea…
▽ More
In this work, we present a novel device that is a combination of a superconducting nanowire single-photon detector and a superconducting multi-level memory. We show that these devices can be used to count the number of detections through single-photon to single-flux conversion. Electrical characterization of the memory properties demonstrates single-flux quantum (SFQ) separated states. Optical measurements using attenuated laser pulses with different mean photon number, pulse energies and repetition rates are shown to differentiate single-photon detection from other possible phenomena, such as multi-photon detection and thermal activation. Finally, different geometries and material stacks to improve device performance, as well as arraying methods are discussed.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
Design and Characterization of Superconducting Nanowire-Based Processors for Acceleration of Deep Neural Network Training
Authors:
Murat Onen,
Brenden A. Butters,
Emily Toomey,
Tayfun Gokmen,
Karl K. Berggren
Abstract:
Training of deep neural networks (DNNs) is a computationally intensive task and requires massive volumes of data transfer. Performing these operations with the conventional von Neumann architectures creates unmanageable time and power costs. Recent studies have shown that mixed-signal designs involving crossbar architectures are capable of achieving acceleration factors as high as 30,000x over the…
▽ More
Training of deep neural networks (DNNs) is a computationally intensive task and requires massive volumes of data transfer. Performing these operations with the conventional von Neumann architectures creates unmanageable time and power costs. Recent studies have shown that mixed-signal designs involving crossbar architectures are capable of achieving acceleration factors as high as 30,000x over the state of the art digital processors. These approaches involve utilization of non-volatile memory (NVM) elements as local processors. However, no technology has been developed to-date that can satisfy the strict device requirements for the unit cell. This paper presents the superconducting nanowire-based processing element as a cross-point device. The unit cell has many programmable non-volatile states that can be used to perform analog multiplication. Importantly, these states are intrinsically discrete due to quantization of flux, which provides symmetric switching characteristics. Operation of these devices in a crossbar is described and verified with electro-thermal circuit simulations. Finally, validation of the concept in an actual DNN training task is shown using an emulator.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
Bridging the gap between nanowires and Josephson junctions: a superconducting device based on controlled fluxon transfer across nanowires
Authors:
Emily Toomey,
Murat Onen,
Marco Colangelo,
Brenden A. Butters,
Adam N. McCaughan,
Karl K. Berggren
Abstract:
The basis for superconducting electronics can broadly be divided between two technologies: the Josephson junction and the superconducting nanowire. While the Josephson junction (JJ) remains the dominant technology due to its high speed and low power dissipation, recently proposed nanowire devices offer improvements such as gain, high fanout, and compatibility with CMOS circuits. Despite these bene…
▽ More
The basis for superconducting electronics can broadly be divided between two technologies: the Josephson junction and the superconducting nanowire. While the Josephson junction (JJ) remains the dominant technology due to its high speed and low power dissipation, recently proposed nanowire devices offer improvements such as gain, high fanout, and compatibility with CMOS circuits. Despite these benefits, nanowire-based electronics have largely been limited to binary operations, with devices switching between the superconducting state and a high-impedance resistive state dominated by uncontrolled hotspot dynamics. Unlike the JJ, they cannot increment an output through successive switching, and their operation speeds are limited by their slow thermal reset times. Thus, there is a need for an intermediate device with the interfacing capabilities of a nanowire but a faster, moderated response allowing for modulation of the output. Here, we present a nanowire device based on controlled fluxon transport. We show that the device is capable of responding proportionally to the strength of its input, unlike other nanowire technologies. The device can be operated to produce a multilevel output with distinguishable states, which can be tuned by circuit parameters. Agreement between experimental results and electrothermal circuit simulations demonstrates that the device is classical and may be readily engineered for applications including use as a multilevel memory.
△ Less
Submitted 22 October, 2018;
originally announced October 2018.
-
A compact superconducting nanowire memory element operated by nanowire cryotrons
Authors:
Qing-Yuan Zhao,
Emily A. Toomey,
Brenden A. Butters,
Adam N. McCaughan,
Andrew E. Dane,
Sae-Woo Nam,
Karl K. Berggren
Abstract:
A superconducting loop stores persistent current without any ohmic loss, making it an ideal platform for energy efficient memories. Conventional superconducting memories use an architecture based on Josephson junctions (JJs) and have demonstrated access times less than 10 ps and power dissipation as low as $10^{-19}$ J. However, their scalability has been slow to develop due to the challenges in r…
▽ More
A superconducting loop stores persistent current without any ohmic loss, making it an ideal platform for energy efficient memories. Conventional superconducting memories use an architecture based on Josephson junctions (JJs) and have demonstrated access times less than 10 ps and power dissipation as low as $10^{-19}$ J. However, their scalability has been slow to develop due to the challenges in reducing the dimensions of JJs and minimizing the area of the superconducting loops. In addition to the memory itself, complex readout circuits require additional JJs and inductors for coupling signals, increasing the overall area. Here, we have demonstrated a superconducting memory based solely on lithographic nanowires. The small dimensions of the nanowire ensure that the device can be fabricated in a dense area in multiple layers, while the high kinetic inductance makes the loop essentially independent of geometric inductance, allowing it to be scaled down without sacrificing performance. The memory is operated by a group of nanowire cryotrons patterned alongside the storage loop, enabling us to reduce the entire memory cell to 3 μm $\times $ 7 μm in our proof-of-concept device. In this work we present the operation principles of a superconducting nanowire memory (nMem) and characterize its bit error rate, speed, and power dissipation.
△ Less
Submitted 22 November, 2017;
originally announced November 2017.
