-
Phase engineering in tantalum sulfide monolayers on Au(111)
Authors:
Daniela Dombrowski,
Abdus Samad,
Kai Mehlich,
Thais Chagas,
Udo Schwingenschlögl,
Carsten Busse
Abstract:
We prepare monolayers of tantalum sulfide on Au(111) by evaporation of Ta in a reactive background of H$_2$S. Under sulfur-rich conditions, monolayers of 2H-TaS$_2$ develop, whereas under sulfur-poor conditions TaS forms, a structure that can be derived from 2H-TaS$_2$ by removal of the bottom S layer. We analyse the alignment of the layers with respect to the substrate and the relation with the d…
▽ More
We prepare monolayers of tantalum sulfide on Au(111) by evaporation of Ta in a reactive background of H$_2$S. Under sulfur-rich conditions, monolayers of 2H-TaS$_2$ develop, whereas under sulfur-poor conditions TaS forms, a structure that can be derived from 2H-TaS$_2$ by removal of the bottom S layer. We analyse the alignment of the layers with respect to the substrate and the relation with the domains in the Au(111) herringbone reconstruction using scanning tunneling microscopy (STM). With the help of density functional theory (DFT) calculations we can determine the registry of the two phases with the substrate. We develop a growth process that allows preparation of uniquely oriented 2H-TaS$_2$ on Au(111). 2H-TaS$_2$ and TaS have a remarkably similar in-plane lattice structure and we observe the formation of lateral 2H-TaS$_2$-TaS heterostructures with atomically well-defined and defect-free boundaries. We observe mirror twin boundaries within 2H-TaS$_2$ along the S- and Ta-edge.
△ Less
Submitted 28 November, 2022;
originally announced November 2022.
-
Metal-insulator transition in monolayer MoS$_2$ via contactless chemical do**
Authors:
Camiel van Efferen,
Clifford Murray,
Jeison Fischer,
Carsten Busse,
Hannu-Pekka Komsa,
Thomas Michely,
Wouter Jolie
Abstract:
Much effort has been made to modify the properties of transition metal dichalcogenide layers via their environment as a route to new functionalization. However, it remains a challenge to induce large electronic changes without chemically altering the layer or compromising its two-dimensionality. Here, a non-invasive technique is used to shift the chemical potential of monolayer MoS$_2$ through p-…
▽ More
Much effort has been made to modify the properties of transition metal dichalcogenide layers via their environment as a route to new functionalization. However, it remains a challenge to induce large electronic changes without chemically altering the layer or compromising its two-dimensionality. Here, a non-invasive technique is used to shift the chemical potential of monolayer MoS$_2$ through p- and n-type do** of graphene (Gr), which remains a well-decoupled 2D substrate. With the intercalation of oxygen (O) under Gr, a nearly rigid Fermi level shift of 0.45 eV in MoS$_2$ is demonstrated, whereas the intercalation of europium (Eu) induces a metal-insulator transition in MoS$_2$, accompanied by a giant band gap reduction of 0.67 eV. Additionally, the effect of the substrate charge on 1D states within MoS$_2$ mirror-twin boundaries (MTBs) is explored. It is found that the 1D nature of the MTB states is not compromised, even when MoS$_2$ is made metallic. Furthermore, with the periodicity of the 1D states dependent on substrate-induced charging and depletion, the boundaries serve as chemical potential sensors functional up to room temperature.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
An Environment for Sustainable Research Software in Germany and Beyond: Current State, Open Challenges, and Call for Action
Authors:
Hartwig Anzt,
Felix Bach,
Stephan Druskat,
Frank Löffler,
Axel Loewe,
Bernhard Y. Renard,
Gunnar Seemann,
Alexander Struck,
Elke Achhammer,
Piush Aggarwal,
Franziska Appel,
Michael Bader,
Lutz Brusch,
Christian Busse,
Gerasimos Chourdakis,
Piotr W. Dabrowski,
Peter Ebert,
Bernd Flemisch,
Sven Friedl,
Bernadette Fritzsch,
Maximilian D. Funk,
Volker Gast,
Florian Goth,
Jean-Noël Grad,
Sibylle Hermann
, et al. (18 additional authors not shown)
Abstract:
Research software has become a central asset in academic research. It optimizes existing and enables new research methods, implements and embeds research knowledge, and constitutes an essential research product in itself. Research software must be sustainable in order to understand, replicate, reproduce, and build upon existing research or conduct new research effectively. In other words, software…
▽ More
Research software has become a central asset in academic research. It optimizes existing and enables new research methods, implements and embeds research knowledge, and constitutes an essential research product in itself. Research software must be sustainable in order to understand, replicate, reproduce, and build upon existing research or conduct new research effectively. In other words, software must be available, discoverable, usable, and adaptable to new needs, both now and in the future. Research software therefore requires an environment that supports sustainability. Hence, a change is needed in the way research software development and maintenance are currently motivated, incentivized, funded, structurally and infrastructurally supported, and legally treated. Failing to do so will threaten the quality and validity of research. In this paper, we identify challenges for research software sustainability in Germany and beyond, in terms of motivation, selection, research software engineering personnel, funding, infrastructure, and legal aspects. Besides researchers, we specifically address political and academic decision-makers to increase awareness of the importance and needs of sustainable research software practices. In particular, we recommend strategies and measures to create an environment for sustainable research software, with the ultimate goal to ensure that software-driven research is valid, reproducible and sustainable, and that software is recognized as a first class citizen in research. This paper is the outcome of two workshops run in Germany in 2019, at deRSE19 - the first International Conference of Research Software Engineers in Germany - and a dedicated DFG-supported follow-up workshop in Berlin.
△ Less
Submitted 5 May, 2020; v1 submitted 27 April, 2020;
originally announced May 2020.
-
Tomonaga-Luttinger liquid in a box: electrons confined within MoS$_2$ mirror twin boundaries
Authors:
Wouter Jolie,
Clifford Murray,
Philipp S. Weiß,
Joshua Hall,
Fabian Portner,
Nicolae Atodiresei,
Arkady V. Krasheninnikov,
Carsten Busse,
Hannu-Pekka Komsa,
Achim Rosch,
Thomas Michely
Abstract:
Two- or three-dimensional metals are usually well described by weakly interacting, fermionic quasiparticles. This concept breaks down in one dimension due to strong Coulomb interactions. There, low-energy electronic excitations are expected to be bosonic collective modes, which fractionalize into independent spin and charge density waves. Experimental research on one-dimensional metals is still ha…
▽ More
Two- or three-dimensional metals are usually well described by weakly interacting, fermionic quasiparticles. This concept breaks down in one dimension due to strong Coulomb interactions. There, low-energy electronic excitations are expected to be bosonic collective modes, which fractionalize into independent spin and charge density waves. Experimental research on one-dimensional metals is still hampered by their difficult realization, their limited accessibility to measurements, and by competing or obscuring effects such as Peierls distortions or zero bias anomalies. Here we overcome these difficulties by constructing a well-isolated, one-dimensional metal of finite length present in MoS$_2$ mirror twin boundaries. Using scanning tunneling spectroscopy we measure the single-particle density of the interacting electron system as a function of energy and position in the 1D box. Comparison to theoretical modeling provides unambiguous evidence that we are observing spin-charge separation in real space.
△ Less
Submitted 21 March, 2019;
originally announced March 2019.
-
Comprehensive tunneling spectroscopy of quasi-freestanding MoS$_2$ on graphene on Ir(111)
Authors:
Clifford Murray,
Wouter Jolie,
Jeison A. Fischer,
Joshua Hall,
Camiel van Efferen,
Niels Ehlen,
Alexander Grüneis,
Carsten Busse,
Thomas Michely
Abstract:
We apply scanning tunneling spectroscopy to determine the bandgaps of mono-, bi- and trilayer MoS$_2$ grown on a graphene single crystal on Ir(111). Besides the typical scanning tunneling spectroscopy at constant height, we employ two additional spectroscopic methods giving extra sensitivity and qualitative insight into the $k$-vector of the tunneling electrons. Employing this comprehensive set of…
▽ More
We apply scanning tunneling spectroscopy to determine the bandgaps of mono-, bi- and trilayer MoS$_2$ grown on a graphene single crystal on Ir(111). Besides the typical scanning tunneling spectroscopy at constant height, we employ two additional spectroscopic methods giving extra sensitivity and qualitative insight into the $k$-vector of the tunneling electrons. Employing this comprehensive set of spectroscopic methods in tandem, we deduce a bandgap of $2.53\pm0.08$ eV for the monolayer. This is close to the predicted values for freestanding MoS$_2$ and larger than is measured for MoS$_2$ on other substrates. Through precise analysis of the `comprehensive' tunneling spectroscopy we also identify critical point energies in the mono- and bilayer MoS$_2$ band structures. These compare well with their calculated freestanding equivalents, evidencing the graphene/Ir(111) substrate as an excellent environment upon which to study the many feted electronic phenomena of monolayer MoS$_2$ and similar materials. Additionally, this investigation serves to expand the fledgling field of the comprehensive tunneling spectroscopy technique itself.
△ Less
Submitted 20 March, 2019;
originally announced March 2019.
-
Product Line Metrics for Legacy Software in Practice
Authors:
Christian Berger,
Holger Rendel,
Bernhard Rumpe,
Carsten Busse,
Thorsten Jablonski,
Fabian Wolf
Abstract:
Nowadays, customer products like vehicles do not only contain mechanical parts but also a highly complex software and their manufacturers have to offer many variants of technically very similar systems with sometimes only small differences in their behavior. The proper reuse of software artifacts which realize this behavior using a software product line is discussed in recent literature and approp…
▽ More
Nowadays, customer products like vehicles do not only contain mechanical parts but also a highly complex software and their manufacturers have to offer many variants of technically very similar systems with sometimes only small differences in their behavior. The proper reuse of software artifacts which realize this behavior using a software product line is discussed in recent literature and appropriate methods and techniques for their management are proposed. However, establishing a software product line for integrating already existing legacy software to reuse valuable resources for future similar products is very company-specific. In this paper, a method is outlined for evaluating objectively a legacy software's potential to create a software product line. This method is applied to several development projects at Volkswagen AG Business Unit Braunschweig to evaluate the software product line potential for steering systems.
△ Less
Submitted 22 September, 2014;
originally announced September 2014.
-
The mechanism of caesium intercalation of graphene
Authors:
M. Petrovic,
I. Srut Rakic,
S. Runte,
C. Busse,
J. T. Sadowski,
P. Lazic,
I. Pletikosic,
Z. -H. Pan,
M. Milun,
P. Pervan,
N. Atodiresei,
R. Brako,
D. Sokcevic,
T. Valla,
T. Michely,
M. Kralj
Abstract:
Properties of many layered materials, including copper- and iron-based superconductors, topological insulators, graphite and epitaxial graphene can be manipulated by inclusion of different atomic and molecular species between the layers via a process known as intercalation. For example, intercalation in graphite can lead to superconductivity and is crucial in the working cycle of modern batteries…
▽ More
Properties of many layered materials, including copper- and iron-based superconductors, topological insulators, graphite and epitaxial graphene can be manipulated by inclusion of different atomic and molecular species between the layers via a process known as intercalation. For example, intercalation in graphite can lead to superconductivity and is crucial in the working cycle of modern batteries and supercapacitors. Intercalation involves complex diffusion processes along and across the layers, but the microscopic mechanisms and dynamics of these processes are not well understood. Here we report on a novel mechanism for intercalation and entrapment of alkali-atoms under epitaxial graphene. We find that the intercalation is adjusted by the van der Waals interaction, with the dynamics governed by defects anchored to graphene wrinkles. Our findings are relevant for the future design and application of graphene-based nano-structures. Similar mechanisms can also play a role for intercalation of layered materials.
△ Less
Submitted 18 November, 2013; v1 submitted 15 November, 2013;
originally announced November 2013.
-
Map** Image Potential States on Graphene Quantum Dots
Authors:
Fabian Craes,
Sven Runte,
Jürgen Klinkhammer,
Marko Kralj,
Thomas Michely,
Carsten Busse
Abstract:
Free electron like image potential states are observed in scanning tunneling spectroscopy on graphene quantum dots on Ir(111) acting as potential wells. The spectrum strongly depends on the size of the nanostructure as well as on the spatial position on top, indicating lateral confinement. Analysis of the substructure of the first state by spatial map** of constant energy local density of states…
▽ More
Free electron like image potential states are observed in scanning tunneling spectroscopy on graphene quantum dots on Ir(111) acting as potential wells. The spectrum strongly depends on the size of the nanostructure as well as on the spatial position on top, indicating lateral confinement. Analysis of the substructure of the first state by spatial map** of constant energy local density of states reveals characteristic patterns of confined states. The most pronounced state is not the ground state, but an excited state with a favorable combination of local density of states and parallel momentum transfer in the tunneling process. Chemical gating tunes the confining potential by changing the local workfunction. Our experimental determination of this workfunction allows to deduce the associated shift of the Dirac point.
△ Less
Submitted 14 June, 2013; v1 submitted 7 March, 2013;
originally announced March 2013.
-
Graphene on Ir(111) characterized by angle-resolved photoemission
Authors:
M. Kralj,
I. Pletikosic,
M. Petrovic,
P. Pervan,
M. Milun,
A. T. N'Diaye,
C. Busse,
T. Michely,
J. Fujii,
I. Vobornik
Abstract:
Angle resolved photoelectron spectroscopy (ARPES) is extensively used to characterize the dependence of the electronic structure of graphene on Ir(111) on the preparation process. ARPES findings reveal that temperature programmed growth alone or in combination with chemical vapor deposition leads to graphene displaying sharp electronic bands. The photoemission intensity of the Dirac cone is monito…
▽ More
Angle resolved photoelectron spectroscopy (ARPES) is extensively used to characterize the dependence of the electronic structure of graphene on Ir(111) on the preparation process. ARPES findings reveal that temperature programmed growth alone or in combination with chemical vapor deposition leads to graphene displaying sharp electronic bands. The photoemission intensity of the Dirac cone is monitored as a function of the increasing graphene area. Electronic features of the moiré superstructure present in the system, namely minigaps and replica bands are examined and used as robust features to evaluate graphene uniformity. The overall dispersion of the pi-band is analyzed. Finally, by the variation of photon energy, relative changes of the pi- and sigma-band intensities are demonstrated.
△ Less
Submitted 9 August, 2011; v1 submitted 20 May, 2011;
originally announced May 2011.
-
Graphene on Ir(111): Physisorption with chemical modulation
Authors:
Carsten Busse,
Predrag Lazić,
Rabie Djemour,
Johann Coraux,
Timm Gerber,
Nicolae Atodiresei,
Vasile Caciuc,
Radovan Brako,
Alpha T. N'Diaye,
Stefan Blügel,
Jörg Zegenhagen,
Thomas Michely
Abstract:
The non-local van der Waals density functional (vdW-DF) approach is applied to calculate the binding of graphene to Ir(111). The precise agreement of the calculated mean height h = 3.41 Å of the C atoms with their mean height h = (3.38 \pm 0.04) Å as measured by the X-ray standing wave (XSW) technique provides a benchmark for the applicability of the non-local functional. We find bonding of graphe…
▽ More
The non-local van der Waals density functional (vdW-DF) approach is applied to calculate the binding of graphene to Ir(111). The precise agreement of the calculated mean height h = 3.41 Å of the C atoms with their mean height h = (3.38 \pm 0.04) Å as measured by the X-ray standing wave (XSW) technique provides a benchmark for the applicability of the non-local functional. We find bonding of graphene to Ir(111) to be due to the van der Waals interaction with an antibonding average contribution from chemical interaction. Despite its globally repulsive character, in certain areas of the large graphene moiré unit cell charge accumulation between Ir substrate and grapheneC atoms is observed, signaling a weak covalent bond formation.
△ Less
Submitted 14 June, 2011; v1 submitted 19 May, 2011;
originally announced May 2011.
-
Wave function map** in graphene quantum dots with soft confinement
Authors:
D. Subramaniam,
F. Libisch,
Y. Li,
C. Pauly,
V. Geringer,
R. Reiter,
T. Mashoff,
M. Liebmann,
J. Burgdoerfer,
C. Busse,
T. Michely,
R. Mazzarello,
M. Pratzer,
M. Morgenstern
Abstract:
Using low-temperature scanning tunneling spectroscopy, we map the local density of states (LDOS) of graphene quantum dots supported on Ir(111). Due to a band gap in the projected Ir band structure around the graphene K point, the electronic properties of the QDs are dominantly graphene-like. Indeed, we compare the results favorably with tight binding calculations on the honeycomb lattice based on…
▽ More
Using low-temperature scanning tunneling spectroscopy, we map the local density of states (LDOS) of graphene quantum dots supported on Ir(111). Due to a band gap in the projected Ir band structure around the graphene K point, the electronic properties of the QDs are dominantly graphene-like. Indeed, we compare the results favorably with tight binding calculations on the honeycomb lattice based on parameters derived from density functional theory. We find that the interaction with the substrate near the edge of the island gradually opens a gap in the Dirac cone, which implies soft-wall confinement. Interestingly, this confinement results in highly symmetric wave functions. Further influences of the substrate are given by the known moir{é} potential and a 10% penetration of an Ir surface resonance
△ Less
Submitted 6 February, 2012; v1 submitted 19 April, 2011;
originally announced April 2011.
-
The molecular structure of the H2O wetting layer on Pt(111)
Authors:
Sebastian Standop,
Alex Redinger,
Markus Morgenstern,
Thomas Michely,
Carsten Busse
Abstract:
The molecular structure of the wetting layer of ice on Pt(111) is resolved using scanning tunneling microscopy (STM). Two structures observed previously by diffraction techniques are imaged for coverages at or close to completion of the wetting layer. At 140K only a sqrt(37) x sqrt(37) R25.3° superstructure can be established, while at 130K also a sqrt(39) x sqrt(39) R16.1° superstructure with sli…
▽ More
The molecular structure of the wetting layer of ice on Pt(111) is resolved using scanning tunneling microscopy (STM). Two structures observed previously by diffraction techniques are imaged for coverages at or close to completion of the wetting layer. At 140K only a sqrt(37) x sqrt(37) R25.3° superstructure can be established, while at 130K also a sqrt(39) x sqrt(39) R16.1° superstructure with slightly higher molecular density is formed. In the temperature range under concern the superstructures reversibly transform into each other by slight changes in coverage through adsorption or desorption. The superstructures exhibit a complex pattern of molecules in different geometries.
△ Less
Submitted 7 July, 2010; v1 submitted 28 April, 2010;
originally announced April 2010.
-
A versatile fabrication method for cluster superlattices
Authors:
Alpha T. N'Diaye,
Timm Gerber,
Carsten Busse,
Josef Myslivecek,
Johann Coraux,
Thomas Michely
Abstract:
On the graphene moire on Ir(111) a variety of highly perfect cluster superlattices can be grown as shown is for Ir, Pt, W, and Re. Even materials that do not form cluster superlattices upon room temperature deposition may be grown into such by low temperature deposition or the application of cluster seeding through Ir as shown for Au, AuIr, FeIr. Criteria for the suitability of a material to for…
▽ More
On the graphene moire on Ir(111) a variety of highly perfect cluster superlattices can be grown as shown is for Ir, Pt, W, and Re. Even materials that do not form cluster superlattices upon room temperature deposition may be grown into such by low temperature deposition or the application of cluster seeding through Ir as shown for Au, AuIr, FeIr. Criteria for the suitability of a material to form a superlattice are given and largely confirmed. It is proven that at least Pt and Ir even form epitaxial cluster superlattices. The temperature stability of the cluster superlattices is investigated and understood on the basis of positional fluctuations of the clusters around their sites of minimum potential energy. The binding sites of Ir, Pt, W and Re cluster superlattices are determined and the ability to cover samples macroscopically with a variety of superlattices is demonstrated.
△ Less
Submitted 26 August, 2009;
originally announced August 2009.
-
Selecting a single orientation for millimeter sized graphene sheets
Authors:
R. van Gastel,
A. T. N'Diaye,
D. Wall,
J. Coraux,
C. Busse,
F. -J. Meyer zu Heringdorf,
N. Buckanie,
M. Horn von Hoegen,
T. Michely,
B. Poelsema
Abstract:
We have used Low Energy Electron Microscopy (LEEM) and Photo Emission Electron Microscopy (PEEM) to study and improve the quality of graphene films grown on Ir(111) using chemical vapor deposition (CVD). CVD at elevated temperature already yields graphene sheets that are uniform and of monatomic thickness. Besides domains that are aligned with respect to the substrate, other rotational variants…
▽ More
We have used Low Energy Electron Microscopy (LEEM) and Photo Emission Electron Microscopy (PEEM) to study and improve the quality of graphene films grown on Ir(111) using chemical vapor deposition (CVD). CVD at elevated temperature already yields graphene sheets that are uniform and of monatomic thickness. Besides domains that are aligned with respect to the substrate, other rotational variants grow. Cyclic growth exploiting the faster growth and etch rates of the rotational variants, yields films that are 99 % composed of aligned domains. Precovering the substrate with a high density of graphene nuclei prior to CVD yields pure films of aligned domains extending over millimeters. Such films can be used to prepare cluster-graphene hybrid materials for catalysis or nanomagnetism and can potentially be combined with lift-off techniques to yield high-quality, graphene based electronic devices.
△ Less
Submitted 21 July, 2009;
originally announced July 2009.
-
In situ observation of stress relaxation in epitaxial graphene
Authors:
Alpha T. N'Diaye,
Raoul van Gastel,
Antonio J. Martinez-Galera,
Johann Coraux,
Hichem Hattab,
Dirk Wall,
Frank-J. Meyer zu Heringdorf,
Michael Horn-von Hoegen,
Jose M. Gomez-Rodriguez,
Bene Poelsema,
Carsten Busse,
Thomas Michely
Abstract:
Upon cooling, branched line defects develop in epitaxial graphene grown at high temperature on Pt(111) and Ir(111). Using atomically resolved scanning tunneling microscopy we demonstrate that these defects are wrinkles in the graphene layer, i.e. stripes of partially delaminated graphene. With low energy electron microscopy (LEEM) we investigate the wrinkling phenomenon in situ. Upon temperature…
▽ More
Upon cooling, branched line defects develop in epitaxial graphene grown at high temperature on Pt(111) and Ir(111). Using atomically resolved scanning tunneling microscopy we demonstrate that these defects are wrinkles in the graphene layer, i.e. stripes of partially delaminated graphene. With low energy electron microscopy (LEEM) we investigate the wrinkling phenomenon in situ. Upon temperature cycling we observe hysteresis in the appearance and disappearance of the wrinkles. Simultaneously with wrinkle formation a change in bright field imaging intensity of adjacent areas and a shift in the moire spot positions for micro diffraction of such areas takes place. The stress relieved by wrinkle formation results from the mismatch in thermal expansion coefficients of graphene and the substrate. A simple one-dimensional model taking into account the energies related to strain, delamination and bending of graphene is in qualitative agreement with our observations.
△ Less
Submitted 15 September, 2009; v1 submitted 4 June, 2009;
originally announced June 2009.
-
Dirac Cones and Minigaps for Graphene on Ir(111)
Authors:
I. Pletikosic,
M. Kralj,
P. Pervan,
R. Brako,
J. Coraux,
A. T. N'Diaye,
C. Busse,
T. Michely
Abstract:
Epitaxial graphene on Ir(111) prepared in excellent structural quality is investigated by angle-resolved photoelectron spectroscopy. It clearly displays a Dirac cone with the Dirac point shifted only slightly above the Fermi level. The moire resulting from the overlaid graphene and Ir(111) surface lattices imposes a superperiodic potential giving rise to Dirac cone replicas and the opening of mi…
▽ More
Epitaxial graphene on Ir(111) prepared in excellent structural quality is investigated by angle-resolved photoelectron spectroscopy. It clearly displays a Dirac cone with the Dirac point shifted only slightly above the Fermi level. The moire resulting from the overlaid graphene and Ir(111) surface lattices imposes a superperiodic potential giving rise to Dirac cone replicas and the opening of minigaps in the band structure.
△ Less
Submitted 13 February, 2009; v1 submitted 17 July, 2008;
originally announced July 2008.
