-
Chemoreception and chemotaxis of a three-sphere swimmer
Authors:
Stevens Paz,
Roberto F. Ausas,
Juan P. Carbajal,
Gustavo C. Buscaglia
Abstract:
The coupled problem of hydrodynamics and solute transport for the Najafi-Golestanian three-sphere swimmer is studied, with the Reynolds number set to zero and Péclet numbers (Pe) ranging from 0.06 to 60. The adopted method is the numerical simulation of the problem with a finite element code based upon the FEniCS library. For the swimmer executing the optimal locomotion gait, we report the Sherwoo…
▽ More
The coupled problem of hydrodynamics and solute transport for the Najafi-Golestanian three-sphere swimmer is studied, with the Reynolds number set to zero and Péclet numbers (Pe) ranging from 0.06 to 60. The adopted method is the numerical simulation of the problem with a finite element code based upon the FEniCS library. For the swimmer executing the optimal locomotion gait, we report the Sherwood number as a function of Pe in homogeneous fluids and confirm that little gain in solute flux is achieved by swimming unless Pe is significantly larger than 10. We also consider the swimmer as an learning agent moving inside a fluid that has a concentration gradient. The outcomes of Q-learning processes show that learning locomotion (with the displacement as reward) is significantly easier than learning chemotaxis (with the increase of solute flux as reward). The chemotaxis problem, even at low Pe, has a varying environment that renders learning more difficult. Further, the learning difficulty increases severely with the Péclet number. The results demonstrate the challenges that natural and artificial swimmers need to overcome to migrate efficiently when exposed to chemical inhomogeneities.
△ Less
Submitted 5 May, 2022;
originally announced May 2022.
-
A finite element method for simulating soft active non-shearable rods immersed in generalized Newtonian fluids
Authors:
Roberto F. Ausas,
Cristian G. Gebhardt,
Gustavo C. Buscaglia
Abstract:
We propose a finite element method for simulating one-dimensional solid models moving and experiencing large deformations while immersed in generalized Newtonian fluids. The method is oriented towards applications involving microscopic devices or organisms in the soft-bio-matter realm. By considering that the strain energy of the solid may explicitly depend on time, we incorporate a mechanism for…
▽ More
We propose a finite element method for simulating one-dimensional solid models moving and experiencing large deformations while immersed in generalized Newtonian fluids. The method is oriented towards applications involving microscopic devices or organisms in the soft-bio-matter realm. By considering that the strain energy of the solid may explicitly depend on time, we incorporate a mechanism for active response. The solids are modeled as Cosserat rods, a detailed formulation being provided for the special case of a planar non-shearable rod. The discretization adopts one-dimensional Hermite elements for the rod and low-order Lagrange two-dimensional elements for the fluid's velocity and pressure. The fluid mesh is boundary-fitted, with remeshing at each time step. Several time marching schemes are studied, of which a semi-implicit scheme emerges as most effective. The method is demonstrated in very challenging examples: the roll-up of a rod to circular shape and later sudden release, the interaction of a soft rod with a fluid jet and the active self-locomotion of a sperm-like rod. The article includes a detailed description of a code that implements the method in the Firedrake library.
△ Less
Submitted 27 July, 2021;
originally announced July 2021.
-
A multiscale Robin-coupled implicit method for two-phase flows in high-contrast formations
Authors:
Franciane F. Rocha,
Fabricio S. Sousa,
Roberto F. Ausas,
Gustavo C. Buscaglia,
Felipe Pereira
Abstract:
In the presence of strong heterogeneities, it is well known that the use of explicit schemes for the transport of species in a porous medium suffers from severe restrictions on the time step. This has led to the development of implicit schemes that are increasingly favoured by practitioners for their computational efficiency. The transport equation requires knowledge of the velocity field, which r…
▽ More
In the presence of strong heterogeneities, it is well known that the use of explicit schemes for the transport of species in a porous medium suffers from severe restrictions on the time step. This has led to the development of implicit schemes that are increasingly favoured by practitioners for their computational efficiency. The transport equation requires knowledge of the velocity field, which results from an elliptic problem (Darcy problem) that is the most expensive part of the computation. When considering large reservoirs, a cost-effective way of approximating the Darcy problems is using multiscale domain decomposition (MDD) methods. They allow for the pressure and velocity fields to be computed on coarse meshes (large scale), while detailed basis functions are defined locally, usually in parallel, in a much finer grid (small scale). In this work we adopt the Multiscale Robin Coupled Method (MRCM, [Guiraldello, et al., J. Comput. Phys., 355 (2018) pp. 1-21], [Rocha, et al., J. Comput. Phys., (2020) 109316]), which is a generalization of previous MDD methods that allows for great flexibility in the choice of interface spaces. In this article we investigate the combination of the MRCM with implicit transport schemes. A sequentially implicit strategy is proposed, with different trust-region algorithms ensuring the convergence of the transport solver. The method is assessed on several very stringent 2D two-phase problems, demonstrating its stability even for large time steps. It is also shown that the best accuracy is achieved by considering recently introduced non-polynomial interface spaces, since polynomial spaces are not optimal for high-contrast channelized permeability fields.
△ Less
Submitted 9 April, 2021;
originally announced April 2021.
-
Towards HPC simulations of Billion-cell Reservoirs by Multiscale Mixed Methods
Authors:
A. Jaramillo,
Rafael T. Guiraldello,
Stevens Paz,
Roberto F. Ausas,
Fabricio S. Sousa,
Felipe Pereira,
Gustavo C. Buscaglia
Abstract:
A three dimensional parallel implementation of Multiscale Mixed Methods based on non-overlap** domain decomposition techniques is proposed for multi-core computers and its computational performance is assessed by means of numerical experimentation. As a prototypical method, from which many others can be derived, the Multiscale Robin Coupled Method is chosen and its implementation explained in de…
▽ More
A three dimensional parallel implementation of Multiscale Mixed Methods based on non-overlap** domain decomposition techniques is proposed for multi-core computers and its computational performance is assessed by means of numerical experimentation. As a prototypical method, from which many others can be derived, the Multiscale Robin Coupled Method is chosen and its implementation explained in detail. Numerical results for problems ranging from millions up to more than 2 billion computational cells in highly heterogeneous anisotropic rock formations based on the SPE10 benchmark are shown. The proposed implementation relies on direct solvers for both local problems and the interface coupling system. We find good weak and strong scalalability as compared against a state-of-the-art global fine grid solver based on Algebric Multigrid preconditioning in single and two-phase flow problems.
△ Less
Submitted 15 March, 2021;
originally announced March 2021.
-
Interface spaces based on physics for multiscale mixed methods applied to flows in fractured-like porous media
Authors:
Franciane F. Rocha,
Fabricio S. Sousa,
Roberto F. Ausas,
Felipe Pereira,
Gustavo C. Buscaglia
Abstract:
It is well known that domain-decomposition-based multiscale mixed methods rely on interface spaces, defined on the skeleton of the decomposition, to connect the solution among the non-overlap** subdomains. Usual spaces, such as polynomial-based ones, cannot properly represent high-contrast channelized features such as fractures (high permeability) and barriers (low permeability) for flows in het…
▽ More
It is well known that domain-decomposition-based multiscale mixed methods rely on interface spaces, defined on the skeleton of the decomposition, to connect the solution among the non-overlap** subdomains. Usual spaces, such as polynomial-based ones, cannot properly represent high-contrast channelized features such as fractures (high permeability) and barriers (low permeability) for flows in heterogeneous porous media. We propose here new interface spaces, which are based on physics, to deal with permeability fields in the simultaneous presence of fractures and barriers, accommodated respectively, by the pressure and flux spaces. Existing multiscale methods based on mixed formulations can take advantage of the proposed interface spaces, however, in order to present and test our results, we use the newly developed Multiscale Robin Coupled Method (MRCM) [Guiraldello, et al., J. Comput. Phys., 355 (2018) pp. 1-21], which generalizes most well-known multiscale mixed methods, and allows for the independent choice of the pressure and flux interface spaces. An adaptive version of the MRCM [Rocha, et al., J. Comput. Phys., 409 (2020), 109316] is considered that automatically selects the physics-based pressure space for fractured structures and the physics-based flux space for regions with barriers, resulting in a procedure with unprecedented accuracy. The features of the proposed approach are investigated through several numerical simulations of single-phase and two-phase flows, in different heterogeneous porous media. The adaptive MRCM combined with the interface spaces based on physics provides promising results for challenging problems with the simultaneous presence of fractures and barriers.
△ Less
Submitted 12 March, 2021;
originally announced March 2021.
-
An extended Elrod-Adams model to account for backpressure and blow-by inception
Authors:
Alfredo Jaramillo,
Gustavo C Buscaglia
Abstract:
The Piston-Ring-Liner system is the main tribological component of internal combustion engines. The Elrod-Adams model is customarily used to numerically assess the hydrodynamics of different ring designs and liner surface treatments. However, that model does not incorporate the backpressure boundary condition, which in this case corresponds to the combustion chamber pressure and is quite significa…
▽ More
The Piston-Ring-Liner system is the main tribological component of internal combustion engines. The Elrod-Adams model is customarily used to numerically assess the hydrodynamics of different ring designs and liner surface treatments. However, that model does not incorporate the backpressure boundary condition, which in this case corresponds to the combustion chamber pressure and is quite significant. In this contribution a model is proposed that imposes the combustion-chamber pressure in a mass-conserving way, together with an effective algorithm for its numerical approximation. The new model incorporates the pressure difference across the ring, which is shown to have a substantial effect on the predicted friction force and MFT. The model is further elaborated so as to provide a criterion for predicting blow-by inception.
△ Less
Submitted 6 May, 2019;
originally announced May 2019.
-
Lagrangian statistics of pressure fluctuation events in homogeneous isotropic turbulence
Authors:
Mehedi Bappy,
Pablo M. Carrica,
Gustavo C. Buscaglia
Abstract:
Homogeneous and isotropic turbulent fields obtained from two DNS databases (with $\mbox{Re}_λ$ equal to 150 and 418) were seeded with point particles that moved with the local fluid velocity to obtain Lagrangian pressure histories. Motivated by cavitation inception modeling, the statistics of events in which such particles undergo low-pressure fluctuations were computed, parameterized by the ampli…
▽ More
Homogeneous and isotropic turbulent fields obtained from two DNS databases (with $\mbox{Re}_λ$ equal to 150 and 418) were seeded with point particles that moved with the local fluid velocity to obtain Lagrangian pressure histories. Motivated by cavitation inception modeling, the statistics of events in which such particles undergo low-pressure fluctuations were computed, parameterized by the amplitude of the fluctuations and by their duration. The main results are the average frequencies of these events and the probabilistic distribution of their duration, which are of predictive value. A connection is also established between these average frequencies and the pressure probability density function, thus justifying experimental methods proposed in the literature. Further analyses of the data show that the occurrence of very-low-pressure events is highly intermittent and is associated with worm-like vortical structures of length comparable to the integral scale of the flow.
△ Less
Submitted 16 July, 2019; v1 submitted 7 May, 2019;
originally announced May 2019.
-
Simulating squirmers with volumetric solvers
Authors:
Stevens Paz Sánchez,
Gustavo C. Buscaglia
Abstract:
Squirmers are models of a class of microswimmers, such as ciliated organisms and phoretic particles, that self-propel in fluids without significant deformation of their body shape. Available techniques for their simulation are based on the boundary-element method and do not contemplate nonlinearities such as those arising from the fluid's inertia or non-Newtonian rheology. This article describes a…
▽ More
Squirmers are models of a class of microswimmers, such as ciliated organisms and phoretic particles, that self-propel in fluids without significant deformation of their body shape. Available techniques for their simulation are based on the boundary-element method and do not contemplate nonlinearities such as those arising from the fluid's inertia or non-Newtonian rheology. This article describes a methodology to simulate squirmers that overcomes these limitations by using volumetric numerical methods, such as finite elements or finite volumes. It deals with interface conditions at the squirmer's surface that generalize those in the published literature. The actual procedures to be performed on a fluid solver to implement the proposed methodology are provided, including the treatment of metachronal surface waves. Among the several numerical examples, a two-dimensional simulation is shown of the hydrodynamic interaction of two individuals of Opalina ranarum.
△ Less
Submitted 18 March, 2019;
originally announced March 2019.
-
A stable numerical strategy for Reynolds-Rayleigh-Plesset coupling
Authors:
Alfredo Jaramillo,
Gustavo C. Buscaglia
Abstract:
The coupling of Reynolds and Rayleigh-Plesset equations has been used in several works to simulate lubricated devices considering cavitation. The numerical strategies proposed so far are variants of a staggered strategy where Reynolds equation is solved considering the bubble dynamics frozen, and then the Rayleigh-Plesset equation is solved to update the bubble radius with the pressure frozen. We…
▽ More
The coupling of Reynolds and Rayleigh-Plesset equations has been used in several works to simulate lubricated devices considering cavitation. The numerical strategies proposed so far are variants of a staggered strategy where Reynolds equation is solved considering the bubble dynamics frozen, and then the Rayleigh-Plesset equation is solved to update the bubble radius with the pressure frozen. We show that this strategy has severe stability issues and a stable methodology is proposed. The proposed methodology performance is assessed on two physical settings. The first one concerns the propagation of a decompression wave along a fracture considering the presence of cavitation nuclei. The second one is a typical journal bearing, in which the coupled model is compared with the Elrod-Adams model.
△ Less
Submitted 22 June, 2018; v1 submitted 4 December, 2017;
originally announced December 2017.
-
Continuous and discrete inf-sup conditions for surface incompressibility of a deformable continuum
Authors:
Gustavo C. Buscaglia
Abstract:
Surface incompressibility, also called inextensibility, imposes a zero-surface-divergence constraint on the velocity of a closed deformable material surface. The well-posedness of the mechanical problem under such constraint depends on an inf-sup or stability condition for which an elementary proof is provided. The result is also shown to hold in combination with the additional constraint of prese…
▽ More
Surface incompressibility, also called inextensibility, imposes a zero-surface-divergence constraint on the velocity of a closed deformable material surface. The well-posedness of the mechanical problem under such constraint depends on an inf-sup or stability condition for which an elementary proof is provided. The result is also shown to hold in combination with the additional constraint of preserving the enclosed volume, or isochoricity. These continuous results are then applied to prove a modified discrete inf-sup condition that is crucial for the convergence of stabilized finite element methods.
△ Less
Submitted 27 July, 2015;
originally announced July 2015.
-
A semi-implicit finite element method for viscous lipid membranes
Authors:
Diego S. Rodrigues,
Roberto F. Ausas,
Fernando Mut,
Gustavo C. Buscaglia
Abstract:
We propose a robust simulation method for phospholipid membranes. It is based on a mixed three-field formulation that accounts for tangential fluidity (Boussinesq-Scriven law), bending elasticity (Canham-Helfrich model) and inextensibility. The unknowns are the velocity, vector curvature and surface pressure fields, all of which are interpolated with linear continuous finite elements. The method i…
▽ More
We propose a robust simulation method for phospholipid membranes. It is based on a mixed three-field formulation that accounts for tangential fluidity (Boussinesq-Scriven law), bending elasticity (Canham-Helfrich model) and inextensibility. The unknowns are the velocity, vector curvature and surface pressure fields, all of which are interpolated with linear continuous finite elements. The method is semi-implicit - it requires the solution of a single linear system per time step. Conditional time stability is observed, with a time step restriction that scales as the square of the mesh size. Mesh quality and refinement are maintained by adaptively remeshing. Another ingredient is a numerical force that emulates the action of an optical tweezer, allowing for virtual interaction with the membrane. Extensive relaxation experiments are reported. Comparisons to exact shapes reveal the orders of convergence for position (5/3), vector curvature (3/2), surface pressure (1) and bending energy (2). Tweezing experiments are also presented. Convergence to the exact dynamics of a cylindrical tether is confirmed. Further tests illustrate the robustness of the method (six tweezers acting simultaneously) and the significance of viscous effects on membrane deformation under external forces.
△ Less
Submitted 25 September, 2014; v1 submitted 11 September, 2014;
originally announced September 2014.
-
Parametric study of the interface behavior between two immiscible liquids flowing through a porous medium
Authors:
Alejandro David Mariotti,
Elena Brandaleze,
Gustavo C. Buscaglia
Abstract:
When two immiscible liquids that coexist inside a porous medium are drained through an opening, a complex flow takes place in which the interface between the liquids moves, tilts and bends. The interface profiles depend on the physical properties of the liquids and on the velocity at which they are extracted. If the drainage flow rate, the liquids volume fraction in the drainage flow and the phy…
▽ More
When two immiscible liquids that coexist inside a porous medium are drained through an opening, a complex flow takes place in which the interface between the liquids moves, tilts and bends. The interface profiles depend on the physical properties of the liquids and on the velocity at which they are extracted. If the drainage flow rate, the liquids volume fraction in the drainage flow and the physical properties of the liquids are known, the interface angle in the immediate vicinity of the outlet (theta) can be determined. In this work, we define four nondimensional parameters that rule the fluid dynamical problem and, by means of a numerical parametric analysis, an equation to predict theta is developed. The equation is verified through several numerical assessments in which the parameters are modified simultaneously and arbitrarily. In addition, the qualitative influence of each nondimensional parameter on the interface shape is reported.
△ Less
Submitted 13 January, 2010;
originally announced January 2010.