-
Hyperelastic swelling of tough hydrogels
Authors:
**g Wang,
Justin C. Burton
Abstract:
Hydrogels are biphasic, swollen polymer networks where elastic deformation is coupled to nanoscale fluid flow. As a consequence, hydrogels can withstand large strains and exhibit nonlinear, hyperelastic properties. For low-modulus hydrogel and semiflexible biopolymer networks, previous studies have shown that these materials universally contract when sheared on timescales much longer than the poro…
▽ More
Hydrogels are biphasic, swollen polymer networks where elastic deformation is coupled to nanoscale fluid flow. As a consequence, hydrogels can withstand large strains and exhibit nonlinear, hyperelastic properties. For low-modulus hydrogel and semiflexible biopolymer networks, previous studies have shown that these materials universally contract when sheared on timescales much longer than the poroelastic relaxation timescale. Using rheological and tribological measurements, we find that tough polyacrylamide and polyacrylic acid hydrogels, with moduli of order ~10-100 kPa, exclusively exhibit dilatancy when sheared. The poroelastic relaxation process was examined using strain-controlled compression, indicating a diffusion constant of order 10^-9 m^2/s. On short timescales (minutes), an applied shear stress induced an increase in normal stress that varied quadratically with shear strain. At long timescales (hours), creep experiments revealed that tough hydrogels can ``remember'' the initial direction of applied shear, suggesting an evolution of the polymer network. Moreover, we show that this dilatant behavior manifests as swelling during tribological sliding, imbibing the hydrogel with fluid. We suggest that this inherent, hyperelastic dilatancy is an important feature in all tough hydrogels, and may explain rehydration and mechanical rejuvenation in biological tissues such as cartilage.
△ Less
Submitted 8 January, 2024;
originally announced January 2024.
-
Learning force laws in many-body systems
Authors:
Wentao Yu,
Eslam Abdelaleem,
Ilya Nemenman,
Justin C. Burton
Abstract:
Scientific laws describing natural systems may be more complex than our intuition can handle, and thus how we discover laws must change. Machine learning (ML) models can analyze large quantities of data, but their structure should match the underlying physical constraints to provide useful insight. Here we demonstrate a ML approach that incorporates such physical intuition to infer force laws in d…
▽ More
Scientific laws describing natural systems may be more complex than our intuition can handle, and thus how we discover laws must change. Machine learning (ML) models can analyze large quantities of data, but their structure should match the underlying physical constraints to provide useful insight. Here we demonstrate a ML approach that incorporates such physical intuition to infer force laws in dusty plasma experiments. Trained on 3D particle trajectories, the model accounts for inherent symmetries and non-identical particles, accurately learns the effective non-reciprocal forces between particles, and extracts each particle's mass and charge. The model's accuracy (R^2 > 0.99) points to new physics in dusty plasma beyond the resolution of current theories and demonstrates how ML-powered approaches can guide new routes of scientific discovery in many-body systems.
△ Less
Submitted 8 October, 2023;
originally announced October 2023.
-
Soft matter physics of the ground beneath our feet
Authors:
Anne Voigtländer,
Morgane Houssais,
Karol A. Bacik,
Ian C. Bourg,
Justin C. Burton,
Karen E. Daniels,
Sujit S. Datta,
Emanuela Del Gado,
Nakul S. Deshpande,
Olivier Devauchelle,
Behrooz Ferdowsi,
Rachel Glade,
Lucas Goehring,
Ian J. Hewitt,
Douglas Jerolmack,
Ruben Juanes,
Arshad Kudrolli,
Ching-Yao Lai,
Wei Li,
Claire Masteller,
Kavinda Nissanka,
Allan M. Rubin,
Howard A. Stone,
Jenny Suckale,
Nathalie M. Vriend
, et al. (2 additional authors not shown)
Abstract:
Inspired by presentations by the authors during a workshop organized at the Princeton Center for Theoretical Science (PCTS) in January 2022, we present a perspective on some of the outstanding questions related to the "physics of the ground beneath our feet." These identified challenges are intrinsically shared with the field of Soft Matter but also have unique aspects when the natural environment…
▽ More
Inspired by presentations by the authors during a workshop organized at the Princeton Center for Theoretical Science (PCTS) in January 2022, we present a perspective on some of the outstanding questions related to the "physics of the ground beneath our feet." These identified challenges are intrinsically shared with the field of Soft Matter but also have unique aspects when the natural environment is studied.
△ Less
Submitted 31 July, 2023;
originally announced August 2023.
-
3D tracking of particles in a dusty plasma by laser sheet tomography
Authors:
Wentao Yu,
Justin C. Burton
Abstract:
The collective behavior of levitated particles in a weakly-ionized plasma (dusty plasma) has raised significant scientific interest. This is due to the complex array of forces acting on the particles, and their potential to act as in-situ diagnostics of the plasma environment. Ideally, the three-dimensional (3D) motion of many particles should be tracked for long periods of time. Typically, stereo…
▽ More
The collective behavior of levitated particles in a weakly-ionized plasma (dusty plasma) has raised significant scientific interest. This is due to the complex array of forces acting on the particles, and their potential to act as in-situ diagnostics of the plasma environment. Ideally, the three-dimensional (3D) motion of many particles should be tracked for long periods of time. Typically, stereoscopic imaging using multiple cameras combined with particle image velocimetry (PIV) is used to obtain a velocity field of many particles, yet this method is limited by its sample volume and short time scales. Here we demonstrate a different, high-speed tomographic imaging method capable of tracking individual particles. We use a scanning laser sheet coupled to a single high-speed camera. We are able to identify and track tens of individual particles over centimeter length scales for several minutes, corresponding to more than 10,000 frames.
△ Less
Submitted 4 June, 2023; v1 submitted 24 February, 2023;
originally announced February 2023.
-
Hydrodynamic Collapse of the Leidenfrost Vapor Layer
Authors:
Dana Harvey,
Justin C. Burton
Abstract:
During the Leidenfrost effect, a stable vapor film can separate a hot solid from an evaporating liquid. Eventually, after formation and upon cooling, the vapor layer cannot be sustained and undergoes a violent collapse evidenced by explosive boiling. Computationally, modeling this instability involves an interplay between hydrodynamics, thermodynamics, rapid evaporation, and length-scales from…
▽ More
During the Leidenfrost effect, a stable vapor film can separate a hot solid from an evaporating liquid. Eventually, after formation and upon cooling, the vapor layer cannot be sustained and undergoes a violent collapse evidenced by explosive boiling. Computationally, modeling this instability involves an interplay between hydrodynamics, thermodynamics, rapid evaporation, and length-scales from $μ$m to cm. Selective assumptions, made to reduce computational costs, have limited most previous studies to steady-state investigations. Here, we combine two-phase laminar flow, heat transfer, and evaporation in a finite-element simulation to examine the failure of Leidenfrost vapor layers during cooling. During periods of quiescence, the geometry of the vapor layer agrees well with steady-state lubrication theory. In the simulations, we report the local temperature of the solid at failure, $T_-$, which provides a lower bound for recent experimental work using the same geometric and material conditions. Surprisingly, we find that inertial forces, which are typically ignored in theoretical treatments of the vapor layer, are responsible for initiating the instability leading to failure.
△ Less
Submitted 25 January, 2023;
originally announced January 2023.
-
Coalescing Clusters Unveil New Regimes of Frictional Fluid Mechanics
Authors:
Haicen Yue,
Justin C. Burton,
Daniel M. Sussman
Abstract:
Droplet coalescence is essential in a host of biological and industrial processes, involving complex systems as diverse as cellular aggregates, colloidal suspensions, and polymeric liquids. Classical solutions for the time evolution of coalescing clusters are typically based on tractable limiting physics, such as analytical solutions to the Stokes equation. By combining computational and theoretic…
▽ More
Droplet coalescence is essential in a host of biological and industrial processes, involving complex systems as diverse as cellular aggregates, colloidal suspensions, and polymeric liquids. Classical solutions for the time evolution of coalescing clusters are typically based on tractable limiting physics, such as analytical solutions to the Stokes equation. By combining computational and theoretical analyses, we show that there is an unexplored family of coalescence processes: those governed by highly dissipative coupling to the environment. This leads to new scaling laws characterizing droplet coalescence, as well as new time-invariant parameterizations of the shape evolution of the coalescing system. We demonstrate these effects via particle-based simulations and both continuum and boundary-integral solutions to hydrodynamic equations, which we then understand in the context of a generalized Navier-Stokes-like equation. Our theoretical description of highly frictional coalescence mathematically maps onto Darcy flow in the presence of surface tension effects, opening up exciting avenues of research in applying well-studied fluid dynamical techniques to a broad range of novel systems.
△ Less
Submitted 12 January, 2024; v1 submitted 12 October, 2022;
originally announced October 2022.
-
Dynamics of Mass Polar Spheroids During Sedimentation
Authors:
Kavinda J. Nissanka,
Xiaolei Ma,
Justin C. Burton
Abstract:
The dynamics of sedimenting particles under gravity are surprisingly complex due to the presence of effective long-ranged forces. When the particles are polar with a well-defined symmetry axis and non-uniform density, recent theoretical predictions suggest that prolate objects will repel and oblate ones will weakly attract. We tested these predictions using mass polar proalte spheroids, which are…
▽ More
The dynamics of sedimenting particles under gravity are surprisingly complex due to the presence of effective long-ranged forces. When the particles are polar with a well-defined symmetry axis and non-uniform density, recent theoretical predictions suggest that prolate objects will repel and oblate ones will weakly attract. We tested these predictions using mass polar proalte spheroids, which are composed of 2 mm spheres glued together. We probed different aspect rations ($κ$) and center of mass offsets ($χ$) by combining spheres of different densities. Experiments were done in both quasi-two-dimensional (2D) and three=dimensional (3D) chambers. By optically tracking the motion of single particles, we found that the dynamics were well-described by a reduced mobility matrix model that could be solved analytically. Pairs of particles exhibited an effective repulsion, and their separation roughly scaled as ~$(κ-1)/χ^{0.39}$, i.e. particles that were more prolate or had smaller mass asymmetry had stronger repulsion effects. In 3D, particles with $χ>0$ were distributed more uniformly than $χ=0$ particles, and the degree of uniformity increased with $κ$, indicating that the effective 2-body repulsion manifests for a large number of particles.
△ Less
Submitted 24 January, 2023; v1 submitted 19 June, 2022;
originally announced June 2022.
-
The lifetime of charged dust in the atmosphere
Authors:
Josh Méndez Harper,
Dana Harvey,
Tianshu Huang,
Jack McGrath III,
David Meer,
Justin C. Burton
Abstract:
Windblown dust plays critical roles in numerous geophysical and biological systems, yet current models fail to explain the transport of coarse-mode particles (>5 $μ$m) to great distances from their sources. For particles larger than a few microns, electrostatic effects have been invoked to account for longer-than-predicted atmospheric residence times. Although much effort has focused on elucidatin…
▽ More
Windblown dust plays critical roles in numerous geophysical and biological systems, yet current models fail to explain the transport of coarse-mode particles (>5 $μ$m) to great distances from their sources. For particles larger than a few microns, electrostatic effects have been invoked to account for longer-than-predicted atmospheric residence times. Although much effort has focused on elucidating the charging processes, comparatively little effort has been expended understanding the stability of charge on particles once electrified. Overall, electrostatic-driven transport requires that charge remain present on particles for days to weeks. Here, we present a set of experiments designed to explore the longevity of electrostatic charge on levitated airborne particles after a single charging event. Using an acoustic levitator, we measured the charge on particles of different material compositions suspended in atmospheric conditions for long periods of time. In dry environments, the total charge on particles decayed in over 1 week. The decay timescale decreased to days in humid environments. These results were independent of particle material and charge polarity. However, exposure to UV radiation could both increase or decrease the decay time depending on polarity. Our work suggests that the rate of charge decay on airborne particles is solely determined by ion capture from the air. Furthermore, using a one-dimensional sedimentation model, we predict that atmospheric dust of order 10 $μ$m will experience the largest change in residence time due to electrostatic forces.
△ Less
Submitted 21 June, 2022; v1 submitted 14 June, 2022;
originally announced June 2022.
-
Extracting Forces from Noisy Dynamics in Dusty Plasmas
Authors:
Wentao Yu,
Jonathan Cho,
Justin C. Burton
Abstract:
Extracting environmental forces from noisy data is a common yet challenging task in complex physical systems. Machine learning represents a robust approach to this problem, yet is mostly tested on simulated data with known parameters. Here we use supervised machine learning to extract the electrostatic, hydrodynamic, and stochastic forces acting on micron-sized charged particles levitated in an ar…
▽ More
Extracting environmental forces from noisy data is a common yet challenging task in complex physical systems. Machine learning represents a robust approach to this problem, yet is mostly tested on simulated data with known parameters. Here we use supervised machine learning to extract the electrostatic, hydrodynamic, and stochastic forces acting on micron-sized charged particles levitated in an argon plasma. Trained on simulated particle trajectories using more than 100 dynamical and statistical features, the model predicts system parameters with 50\% better accuracy than conventional methods, and provides non-contact measurements of the particle charge and Debye length.
△ Less
Submitted 3 October, 2022; v1 submitted 7 March, 2022;
originally announced March 2022.
-
Relaxation and Recovery in Hydrogel Friction on Smooth Surfaces
Authors:
Brady Wu,
Joshua Méndez Harper,
Justin C. Burton
Abstract:
\textbf{Background} Hydrogels are crosslinked polymer networks that can absorb and retain a large fraction of liquid. Near a critical sliding velocity, hydrogels pressed against smooth surfaces exhibit time-dependent frictional behavior occurring over multiple timescales, yet the origin of these dynamics is unresolved. \textbf{Objective} Here, we characterize this time-dependent regime and show th…
▽ More
\textbf{Background} Hydrogels are crosslinked polymer networks that can absorb and retain a large fraction of liquid. Near a critical sliding velocity, hydrogels pressed against smooth surfaces exhibit time-dependent frictional behavior occurring over multiple timescales, yet the origin of these dynamics is unresolved. \textbf{Objective} Here, we characterize this time-dependent regime and show that it is consistent with two distinct molecular processes: sliding-induced relaxation and quiescent recovery. \textbf{Methods} Our experiments use a custom pin-on-disk tribometer to examine poly(acrylic acid) hydrogels on smooth poly(methyl methacrylate) surfaces over a variety of sliding conditions, from minutes to hours. \textbf{Results} We show that at a fixed sliding velocity, the friction coefficient decays exponentially and reaches a steady-state value. The time constant associated with this decay varies exponentially with the sliding velocity, and is sensitive to any precedent frictional shearing of the interface. This process is reversible; upon cessation of sliding, the friction coefficient recovers to its original state. We also show that the initial direction of shear can be imprinted as an observable "memory", and is visible after 24 hrs of repeated frictional shearing. \textbf{Conclusions} We attribute this behavior to nanoscale extension and relaxation dynamics of the near-surface polymer network, leading to a model of frictional relaxation and recovery with two parallel timescales.
△ Less
Submitted 12 January, 2021;
originally announced January 2021.
-
The Minimum Leidenfrost Temperature on Smooth Surfaces
Authors:
Dana Harvey,
Joshua Mendez Harper,
Justin C. Burton
Abstract:
During the Leidenfrost effect, a thin insulating vapor layer separates an evaporating liquid from a hot solid. Here we demonstrate that Leidenfrost vapor layers can be sustained at much lower temperatures than those required for formation. Using a high-speed electrical technique to measure the thickness of water vapor layers over smooth, metallic surfaces, we find that the explosive failure point…
▽ More
During the Leidenfrost effect, a thin insulating vapor layer separates an evaporating liquid from a hot solid. Here we demonstrate that Leidenfrost vapor layers can be sustained at much lower temperatures than those required for formation. Using a high-speed electrical technique to measure the thickness of water vapor layers over smooth, metallic surfaces, we find that the explosive failure point is nearly independent of material and fluid properties, suggesting a purely hydrodynamic mechanism determines this threshold. For water vapor layers of several millimeters in size, the minimum temperature for stability is $\approx 140^{\circ}$C, corresponding to an average vapor layer thickness of 10-20$μ$m.
△ Less
Submitted 4 August, 2021; v1 submitted 20 October, 2020;
originally announced October 2020.
-
Pore-size dependence and slow relaxation of hydrogel friction on smooth surfaces
Authors:
Nicholas L. Cuccia,
Suraj Pothineni,
Brady Wu,
Joshua Méndez-Harper,
Justin C. Burton
Abstract:
Hydrogel consists of a crosslinked polymer matrix imbibed with a solvent such as water at volume fractions that can exceed 90\%. They are important in many scientific and engineering applications due to their tunable physiochemical properties, bio-compatibility, and ultra-low friction. Their multiphase structure leads to a complex interfacial rheology, yet a detailed, microscopic understanding of…
▽ More
Hydrogel consists of a crosslinked polymer matrix imbibed with a solvent such as water at volume fractions that can exceed 90\%. They are important in many scientific and engineering applications due to their tunable physiochemical properties, bio-compatibility, and ultra-low friction. Their multiphase structure leads to a complex interfacial rheology, yet a detailed, microscopic understanding of hydrogel friction is still emerging. Using a custom-built tribometer, here we identify three distinct regimes of frictional behavior for polyacrylic acid (PAA), polyacrylamide (PAAm), and agarose hydrogel spheres on smooth surfaces. We find that at low velocities, friction is controlled by hydrodynamic flow through the porous hydrogel network, and is inversely proportional to the characteristic pore size. At high velocities, a mesoscopic, lubricating liquid film forms between the gel and surface that obeys elastohydrodynamic theory. Between these regimes, the frictional force decreases by an order of magnitude and displays slow relaxation over several minutes. Our results can be interpreted as an interfacial shear thinning of the polymers with an increasing relaxation time due to the confinement of entanglements. This transition can be tuned by varying the solvent salt concentration, solvent viscosity, and sliding geometry at the interface.
△ Less
Submitted 27 March, 2020; v1 submitted 2 January, 2020;
originally announced January 2020.
-
The origin of large amplitude oscillations of dust particles in a plasma sheath
Authors:
Joshua Méndez Harper,
Guram Gogia,
Brady Wu,
Zachary Laseter,
Justin C. Burton
Abstract:
Micron-size charged particles can be easily levitated in low-density plasma environments. At low pressures, suspended particles have been observed to spontaneously oscillate around an equilibrium position. In systems of many particles, these oscillations can catalyze a variety of nonequilibrium, collective behaviors. Here, we report spontaneous oscillations of single particles that remain stable f…
▽ More
Micron-size charged particles can be easily levitated in low-density plasma environments. At low pressures, suspended particles have been observed to spontaneously oscillate around an equilibrium position. In systems of many particles, these oscillations can catalyze a variety of nonequilibrium, collective behaviors. Here, we report spontaneous oscillations of single particles that remain stable for minutes with striking regularity in amplitude and frequency. The oscillation amplitude can also exceed 1 cm, nearly an order of magnitude larger than previously observed. Using an integrated experimental and numerical approach, we show how the motion of an individual particle can be used to extract the electrostatic force and equilibrium charge variation in the plasma sheath. Additionally, using a delayed-charging model, we are able to accurately capture the nonlinear dynamics of the particle motion, and estimate the particle's equilibrium charging time in the plasma environment.
△ Less
Submitted 8 June, 2020; v1 submitted 8 August, 2019;
originally announced August 2019.
-
How to make a giant bubble
Authors:
Stephen Frazier,
Xinyi Jiang,
Justin C. Burton
Abstract:
Using mixtures of soap, water, and long chain polymers, free-floating soap bubbles can be formed with volumes approaching 100 m$^3$. Here we investigate how such thin films are created and maintained over time. We show how the extensional rheology is the most important factor in creating the bubble, and how polydispersity in molecular weight of the solvated polymers leads to better performance at…
▽ More
Using mixtures of soap, water, and long chain polymers, free-floating soap bubbles can be formed with volumes approaching 100 m$^3$. Here we investigate how such thin films are created and maintained over time. We show how the extensional rheology is the most important factor in creating the bubble, and how polydispersity in molecular weight of the solvated polymers leads to better performance at lower concentrations. Additionally, using IR absorption, we measure soap film thickness profiles and film lifetimes. Although the initial thickness mostly depends on the choice of detergent, polymers can dramatically increase film lifetime at high molecular weights and high concentrations, although such high concentrations can inhibit the initial film formation. Thus, the ideal concentration of polymer additives for making giant bubbles requires a robust viscoelastic rheology during extension, and is aided by long film lifetimes during gravitational drainage and evaporation.
△ Less
Submitted 22 November, 2019; v1 submitted 1 August, 2019;
originally announced August 2019.
-
Tuning contact line dynamics and deposition patterns in volatile liquid mixtures
Authors:
Asher P. Mouat,
Clay E. Wood,
Justin E. Pye,
Justin C. Burton
Abstract:
The spreading of a pure, volatile liquid on a wettable substrate has been studied in extensive detail. Here we show that the addition of a miscible, non-volatile liquid can strongly alter the contact line dynamics and the final liquid deposition pattern. We observe two distinct regimes of behavior depending on the relative strength of solutal Marangoni forces and surface wetting. Finger-like insta…
▽ More
The spreading of a pure, volatile liquid on a wettable substrate has been studied in extensive detail. Here we show that the addition of a miscible, non-volatile liquid can strongly alter the contact line dynamics and the final liquid deposition pattern. We observe two distinct regimes of behavior depending on the relative strength of solutal Marangoni forces and surface wetting. Finger-like instabilities precede the deposition of a sub-micron thick film for large Marangoni forces and small solute contact angles, whereas isolated, pearl-like drops emerge and are deposited in quasi-crystalline patterns for small Marangoni forces and large solute contact angles. This behavior can be tuned by directly varying the contact angle of the solute liquid on the solid substrate.
△ Less
Submitted 17 January, 2020; v1 submitted 22 May, 2019;
originally announced May 2019.
-
Intermittent "Turbulence" in a Many-body System
Authors:
Guram Gogia,
Wentao Yu,
Justin C. Burton
Abstract:
In natural settings, intermittent dynamics are ubiquitous and often arise from a coupling between external driving and spatial heterogeneities. A well-known example is the generation of transient, turbulent puffs of fluid through a pipe with rough walls. Here we show how similar dynamics can emerge in a discrete, crystalline system of particles driven by noise. Polydispersity in particle masses le…
▽ More
In natural settings, intermittent dynamics are ubiquitous and often arise from a coupling between external driving and spatial heterogeneities. A well-known example is the generation of transient, turbulent puffs of fluid through a pipe with rough walls. Here we show how similar dynamics can emerge in a discrete, crystalline system of particles driven by noise. Polydispersity in particle masses leads to localized vibrational modes that effectuate a transition to a gas-like phase. A minimal model for the evolution of the system's mechanical energies exhibits quasi-cyclic oscillations, and a single, dimensionless number captures the essential features of the intermittent dynamics, analogous to the Reynolds number for pipe flow.
△ Less
Submitted 15 January, 2020; v1 submitted 29 January, 2019;
originally announced January 2019.
-
Universal Scaling of Polygonal Desiccation Crack Patterns
Authors:
Xiaolei Ma,
Janna Lowensohn,
Justin C. Burton
Abstract:
Polygonal desiccation crack patterns are commonly observed in natural systems. Despite their quotidian nature, it is unclear whether similar crack patterns which span orders of magnitude in length scales share the same underlying physics. In thin films, the characteristic length of polygonal cracks is known to monotonically increase with the film thickness, however, existing theories that consider…
▽ More
Polygonal desiccation crack patterns are commonly observed in natural systems. Despite their quotidian nature, it is unclear whether similar crack patterns which span orders of magnitude in length scales share the same underlying physics. In thin films, the characteristic length of polygonal cracks is known to monotonically increase with the film thickness, however, existing theories that consider the mechanical, thermodynamic, hydrodynamic, and statistical properties of cracking often lead to contradictory predictions. Here we experimentally investigate polygonal cracks in drying suspensions of micron-sized particles by varying film thickness, boundary adhesion, packing fraction, and solvent. Although polygonal cracks were observed in most systems above a critical film thickness, in cornstarch-water mixtures, multi-scale crack patterns were observed due to two distinct desiccation mechanisms. Large-scale, primary polygons initially form due to capillary-induced film shrinkage, whereas small-scale, secondary polygons appear later due to the deswelling of the hygroscopic particles. In addition, we find that the characteristic area of the polygonal cracks, $A_p$, obeys a universal power law, $A_p=αh^{4/3}$, where $h$ is the film thickness. By quantitatively linking $α$ with the material properties during crack formation, we provide a robust framework for understanding multi-scale polygonal crack patterns from microscopic to geologic scales.
△ Less
Submitted 29 November, 2018; v1 submitted 16 July, 2018;
originally announced July 2018.
-
Precursors to Molecular Slip on Smooth Hydrophobic Surfaces
Authors:
Justin E. Pye,
Clay E. Wood,
Justin C. Burton
Abstract:
Experiments and simulations suggest that simple liquids may experience slip while flowing near a smooth, hydrophobic surface. Here we show how precursors to molecular slip can be observed in the complex response of a liquid to oscillatory shear. We measure both the change in frequency and bandwidth of a quartz crystal microbalance (QCM) during the growth of a single drop of water immersed in an am…
▽ More
Experiments and simulations suggest that simple liquids may experience slip while flowing near a smooth, hydrophobic surface. Here we show how precursors to molecular slip can be observed in the complex response of a liquid to oscillatory shear. We measure both the change in frequency and bandwidth of a quartz crystal microbalance (QCM) during the growth of a single drop of water immersed in an ambient liquid. By varying the hydrophobicity of the surface using self-assembled monolayers, our results show little or no slip for water on all surfaces. However, we observe excess transverse motion near hydrophobic surfaces due to weak binding in the corrugated surface potential, an essential precursor to slip. We also show how this effect can be easily missed in simulations utilizing finite-ranged interaction potentials.
△ Less
Submitted 5 September, 2018; v1 submitted 24 March, 2018;
originally announced March 2018.
-
Self-organized oscillations of Leidenfrost drops
Authors:
Xiaolei Ma,
Justin C. Burton
Abstract:
In the Leidenfrost effect, a thin layer of evaporated vapor forms between a liquid and a hot solid. The complex interactions between the solid, liquid, and vapor phases can lead to rich dynamics even in a single Leidenfrost drop. Here we investigate the self-organized oscillations of Leidenfrost drops that are excited by a constant flow of evaporated vapor beneath the drop. We show that for small…
▽ More
In the Leidenfrost effect, a thin layer of evaporated vapor forms between a liquid and a hot solid. The complex interactions between the solid, liquid, and vapor phases can lead to rich dynamics even in a single Leidenfrost drop. Here we investigate the self-organized oscillations of Leidenfrost drops that are excited by a constant flow of evaporated vapor beneath the drop. We show that for small Leidenfrost drops, the frequency of a recently reported "breathing mode" can be explained by a simple balance of gravitational and surface tension forces. For large Leidenfrost drops, azimuthal star-shaped oscillations are observed. Our previous work showed how the coupling between the rapid evaporated vapor flow and the vapor-liquid interface excites the star oscillations (Ma \textit{et al., Phys. Rev. Fluids}, 2, 2017, 031602). In our experiments, star-shaped oscillation modes of $n=2$ to 13 are observed in different liquids, the number of observed modes depends sensitively on the liquid viscosity. Here we expand on this work by directly comparing the oscillations with theoretical predictions, and show how the oscillations are initiated by a parametric forcing mechanism through pressure oscillations in the vapor layer. The pressure oscillations are driven by the capillary waves of a characteristic wavelength beneath the drop. These capillary waves can be generated by a large shear stress at the liquid-vapor interface due to the rapid flow of evaporated vapor. We also explore potential effects of thermal convection in the liquid. Although the measured Rayleigh number is significantly larger than the critical value, the frequency (wavelength) of the oscillations depends only on the capillary length of the liquid, and is independent of the drop radius and substrate temperature. Thus convection seems to play a minor role in Leidenfrost drop oscillations, which are mostly hydrodynamic in origin.
△ Less
Submitted 30 March, 2018; v1 submitted 16 February, 2018;
originally announced February 2018.
-
Star-shaped Oscillations of Leidenfrost Drops
Authors:
Xiaolei Ma,
Juan-José Liétor-Santos,
Justin C. Burton
Abstract:
We experimentally investigate the self-sustained, star-shaped oscillations of Leidenfrost drops. The drops levitate on a cushion of evaporated vapor over a heated, curved surface. We observe modes with $n = 2-13$ lobes around the drop periphery. We find that the wavelength of the oscillations depends only on the capillary length of the liquid, and is independent of the drop radius and substrate te…
▽ More
We experimentally investigate the self-sustained, star-shaped oscillations of Leidenfrost drops. The drops levitate on a cushion of evaporated vapor over a heated, curved surface. We observe modes with $n = 2-13$ lobes around the drop periphery. We find that the wavelength of the oscillations depends only on the capillary length of the liquid, and is independent of the drop radius and substrate temperature. However, the number of observed modes depends sensitively on the liquid viscosity. The dominant frequency of pressure variations in the vapor layer is approximately twice the drop oscillation frequency, consistent with a parametric forcing mechanism. Our results show that the star-shaped oscillations are driven by capillary waves of a characteristic wavelength beneath the drop, and that the waves are generated by a large shear stress at the liquid-vapor interface.
△ Less
Submitted 16 September, 2016; v1 submitted 17 May, 2016;
originally announced May 2016.
-
Casimir effect between pinned particles in two-dimensional jammed systems
Authors:
Justin C. Burton,
Juan-José Liétor-Santos
Abstract:
The Casimir effect arises when long-ranged fluctuations are geometrically confined between two surfaces, leading to a macroscopic force. Traditionally, these forces have been observed in quantum systems and near critical points in classical systems. Here we show the existence of Casimir-like forces between two pinned particles immersed in two-dimensional systems near the jamming transition. We obs…
▽ More
The Casimir effect arises when long-ranged fluctuations are geometrically confined between two surfaces, leading to a macroscopic force. Traditionally, these forces have been observed in quantum systems and near critical points in classical systems. Here we show the existence of Casimir-like forces between two pinned particles immersed in two-dimensional systems near the jamming transition. We observe two components to the total force: a short-ranged, depletion force and a long-ranged, repulsive Casimir-like force. The Casimir-like force dominates as the jamming transition is approached, and when the pinned particles are much larger than the ambient jammed particles. We show that this repulsive force arises due to a clustering of particles with strong contact forces around the perimeter of the pinned particles. As the separation between the pinned particles decreases, a region of high-pressure develops between them, leading to a net repulsive force.
△ Less
Submitted 18 January, 2017; v1 submitted 18 April, 2016;
originally announced April 2016.
-
Echoes from Anharmonic Normal Modes in Model Glasses
Authors:
Justin C. Burton,
Sidney R. Nagel
Abstract:
Glasses display a wide array of nonlinear acoustic phenomena at temperatures $T\lesssim 1$ K. This behavior has traditionally been explained by an ensemble of weakly-coupled, two-level tunneling states, a theory that is also used to describe the thermodynamic properties of glasses at low temperatures. One of the most striking acoustic signatures in this regime is the existence of phonon echoes, a…
▽ More
Glasses display a wide array of nonlinear acoustic phenomena at temperatures $T\lesssim 1$ K. This behavior has traditionally been explained by an ensemble of weakly-coupled, two-level tunneling states, a theory that is also used to describe the thermodynamic properties of glasses at low temperatures. One of the most striking acoustic signatures in this regime is the existence of phonon echoes, a feature that has been associated with two-level systems with the same formalism as spin echoes in NMR. Here we report the existence of distinctly different type of acoustic echo in classical models of glassy materials. Our simulations consist of finite-ranged, repulsive spheres and also particles with attractive forces using Lennard-Jones interactions. We show that these echoes are due to anharmonic, weakly-coupled vibrational modes, and perhaps provide an alternative explanation for the phonon echoes observed in glasses at low temperatures.
△ Less
Submitted 20 March, 2016; v1 submitted 19 January, 2016;
originally announced January 2016.
-
Coalescence of bubbles and drops in an outer fluid
Authors:
Joseph D. Paulsen,
Rémi Carmigniani,
Anerudh Kannan,
Justin C. Burton,
Sidney R. Nagel
Abstract:
When two liquid drops touch, a microscopic connecting liquid bridge forms and rapidly grows as the two drops merge into one. Whereas coalescence has been thoroughly studied when drops coalesce in vacuum or air, many important situations involve coalescence in a dense surrounding fluid, such as oil coalescence in brine. Here we study the merging of gas bubbles and liquid drops in an external fluid.…
▽ More
When two liquid drops touch, a microscopic connecting liquid bridge forms and rapidly grows as the two drops merge into one. Whereas coalescence has been thoroughly studied when drops coalesce in vacuum or air, many important situations involve coalescence in a dense surrounding fluid, such as oil coalescence in brine. Here we study the merging of gas bubbles and liquid drops in an external fluid. Our data indicate that the flows occur over much larger length scales in the outer fluid than inside the drops themselves. Thus we find that the asymptotic early regime is always dominated by the viscosity of the drops, independent of the external fluid. A phase diagram showing the crossovers into the different possible late-time dynamics identifies a dimensionless number that signifies when the external viscosity can be important.
△ Less
Submitted 24 July, 2014;
originally announced July 2014.
-
Collision Dynamics of Particle Clusters in a Two-dimensional Granular Gas
Authors:
Justin C. Burton,
Peter Y. Lu,
Sidney R. Nagel
Abstract:
In a granular gas, inelastic collisions produce an instability in which the constituent particles cluster heterogeneously. These clusters then interact with each other, further decreasing their kinetic energy. We report experiments of the free collisions of dense clusters of particles in a two-dimensional geometry. The particles are composed of solid CO$_{2}$, which float nearly frictionlessly on…
▽ More
In a granular gas, inelastic collisions produce an instability in which the constituent particles cluster heterogeneously. These clusters then interact with each other, further decreasing their kinetic energy. We report experiments of the free collisions of dense clusters of particles in a two-dimensional geometry. The particles are composed of solid CO$_{2}$, which float nearly frictionlessly on a hot surface due to sublimated vapor. After two dense clusters of $\approx$ 100 particles collide, there are two distinct stages of evolution. First, the translational kinetic energy rapidly decreases by over 90% as a "jamming front" sweeps across each cluster. Subsequently, the kinetic energy decreases more slowly as the particles approach the container boundaries. In this regime, the measured velocity distributions are non-Gaussian with long tails. Finally, we compare our experiments to computer simulations of colliding, two-dimensional, granular clusters composed of circular, viscoelastic particles with friction.
△ Less
Submitted 15 October, 2013;
originally announced October 2013.
-
Energy Loss at Propagating Jamming Fronts in Granular Gas Clusters
Authors:
Justin C. Burton,
Peter Y. Lu,
Sidney R. Nagel
Abstract:
We explore the initial moments of impact between two dense granular clusters in a two-dimensional geometry. The particles are composed of solid CO$_{2}$ and are levitated on a hot surface. Upon collision, the propagation of a dynamic "jamming front" produces a distinct regime for energy dissipation in a granular gas in which the translational kinetic energy decreases by over 90%. Experiments and a…
▽ More
We explore the initial moments of impact between two dense granular clusters in a two-dimensional geometry. The particles are composed of solid CO$_{2}$ and are levitated on a hot surface. Upon collision, the propagation of a dynamic "jamming front" produces a distinct regime for energy dissipation in a granular gas in which the translational kinetic energy decreases by over 90%. Experiments and associated simulations show that the initial loss of kinetic energy obeys a power law in time, $ΔE=-Kt^{3/2}$, a form that can be predicted from kinetic arguments.
△ Less
Submitted 15 October, 2013; v1 submitted 11 June, 2013;
originally announced June 2013.
-
The inexorable resistance of inertia determines the initial regime of drop coalescence
Authors:
Joseph D. Paulsen,
Justin C. Burton,
Sidney R. Nagel,
Santosh Appathurai,
Michael T. Harris,
Osman A. Basaran
Abstract:
Drop coalescence is central to diverse processes involving dispersions of drops in industrial, engineering and scientific realms. During coalescence, two drops first touch and then merge as the liquid neck connecting them grows from initially microscopic scales to a size comparable to the drop diameters. The curvature of the interface is infinite at the point where the drops first make contact, an…
▽ More
Drop coalescence is central to diverse processes involving dispersions of drops in industrial, engineering and scientific realms. During coalescence, two drops first touch and then merge as the liquid neck connecting them grows from initially microscopic scales to a size comparable to the drop diameters. The curvature of the interface is infinite at the point where the drops first make contact, and the flows that ensue as the two drops coalesce are intimately coupled to this singularity in the dynamics. Conventionally, this process has been thought to have just two dynamical regimes: a viscous and an inertial regime with a crossover region between them. We use experiments and simulations to reveal that a third regime, one that describes the initial dynamics of coalescence for all drop viscosities, has been missed. An argument based on force balance allows the construction of a new coalescence phase diagram.
△ Less
Submitted 18 April, 2012;
originally announced April 2012.
-
The Geometry of the Vapor Layer Under a Leidenfrost Drop
Authors:
J. C. Burton,
A. L. Sharpe,
R. C. A. van der Veen,
A. Franco,
S. R. Nagel
Abstract:
In the Leidenfrost effect, liquid drops deposited on a hot surface levitate on a thin vapor cushion fed by evaporation of the liquid. This vapor layer forms a concave depression in the drop interface. Using laser-light interference coupled to high-speed imaging, we measured the radius, curvature, and height of the vapor pocket, as well as non-axisymmetric fluctuations of the interface for water dr…
▽ More
In the Leidenfrost effect, liquid drops deposited on a hot surface levitate on a thin vapor cushion fed by evaporation of the liquid. This vapor layer forms a concave depression in the drop interface. Using laser-light interference coupled to high-speed imaging, we measured the radius, curvature, and height of the vapor pocket, as well as non-axisymmetric fluctuations of the interface for water drops at different temperatures. The geometry of the vapor pocket depends primarily on the drop size and not on the substrate temperature.
△ Less
Submitted 20 June, 2012; v1 submitted 9 February, 2012;
originally announced February 2012.
-
Simulations of Coulombic Fission of Charged Inviscid Drops
Authors:
Justin C. Burton,
Peter Taborek
Abstract:
We present boundary-integral simulations of the evolution of critically charged droplets. For such droplets, small ellipsoidal perturbations are unstable and eventually lead to the formation of a "lemon"-shaped drop with very sharp tips. For perfectly conducting drops, the tip forms a self-similar cone shape with a subtended angle identical to that of a Taylor cone. At the tip, quantities such and…
▽ More
We present boundary-integral simulations of the evolution of critically charged droplets. For such droplets, small ellipsoidal perturbations are unstable and eventually lead to the formation of a "lemon"-shaped drop with very sharp tips. For perfectly conducting drops, the tip forms a self-similar cone shape with a subtended angle identical to that of a Taylor cone. At the tip, quantities such and pressure and fluid velocity diverge in time with power-law scaling. In contrast, when charge transport is described by a finite conductivity, we find that small progeny drops are formed at the tips whose size decreases as the conductivity is increased. These small progeny drops are of nearly critical charge, and are precursors to the emission of a sustained flow of liquid from the tips as observed in experiments of isolated charged drops.
△ Less
Submitted 15 January, 2011;
originally announced January 2011.
-
Viscous to Inertial Crossover in Liquid Drop Coalescence
Authors:
Joseph D. Paulsen,
Justin C. Burton,
Sidney R. Nagel
Abstract:
Using an electrical method and high-speed imaging we probe drop coalescence down to 10 ns after the drops touch. By varying the liquid viscosity over two decades, we conclude that at sufficiently low approach velocity where deformation is not present, the drops coalesce with an unexpectedly late crossover time between a regime dominated by viscous and one dominated by inertial effects. We argue th…
▽ More
Using an electrical method and high-speed imaging we probe drop coalescence down to 10 ns after the drops touch. By varying the liquid viscosity over two decades, we conclude that at sufficiently low approach velocity where deformation is not present, the drops coalesce with an unexpectedly late crossover time between a regime dominated by viscous and one dominated by inertial effects. We argue that the late crossover, not accounted for in the theory, can be explained by an appropriate choice of length-scales present in the flow geometry.
△ Less
Submitted 15 March, 2011; v1 submitted 6 December, 2010;
originally announced December 2010.
