-
Impact ionization in low-band-gap semiconductors driven by ultrafast THz excitation: beyond the ballistic regime
Authors:
Simone Biasco,
Florence Burri,
Sarah Houver,
Elsa Abreu,
Matteo Savoini,
Steven L. Johnson
Abstract:
Using two-dimensional THz spectroscopy in combination with numerical models, we investigate the dynamics linked to carrier multiplication caused by high-field THz excitation of the low-gap semiconductor InSb. In addition to previously observed dynamics connected with quasi-ballistic carrier dynamics, we observe other spectral and temporal features that we attribute to impact ionization for peak fi…
▽ More
Using two-dimensional THz spectroscopy in combination with numerical models, we investigate the dynamics linked to carrier multiplication caused by high-field THz excitation of the low-gap semiconductor InSb. In addition to previously observed dynamics connected with quasi-ballistic carrier dynamics, we observe other spectral and temporal features that we attribute to impact ionization for peak fields above 60 kV/cm, which continue up to the maximum investigated peak field of 430 kV/cm. At the highest fields we estimate a carrier multiplication factor greater than 10 due to impact ionization, which is well-reproduced by a numerical simulation of the impact ionization process which we have developed.
△ Less
Submitted 15 August, 2022;
originally announced August 2022.
-
Muon spin rotation study of type-I superconductivity: elemental $β-$Sn
Authors:
Richard Karl,
Florence Burri,
Alex Amato,
Mauro Donegà,
Severian Gvasaliya,
Hubertus Luetkens,
Elvezio Morenzoni,
Rustem Khasanov
Abstract:
The application of the muon-spin rotation/relaxation ($μ$SR) technique for studying type-I superconductivity is discussed. In the intermediate state, i.e. when a type-I superconducting sample with non-zero demagnetization factor $N$ is separated into normal state and Meissner state (superconducting) domains, the $μ$SR technique allows to determine with very high precision the value of the thermody…
▽ More
The application of the muon-spin rotation/relaxation ($μ$SR) technique for studying type-I superconductivity is discussed. In the intermediate state, i.e. when a type-I superconducting sample with non-zero demagnetization factor $N$ is separated into normal state and Meissner state (superconducting) domains, the $μ$SR technique allows to determine with very high precision the value of the thermodynamic critical field $B_{\rm c}$, as well as the volume of the sample in the normal and the superconducting state. Due to the microscopic nature of $μ$SR technique, the $B_{\rm c}$ values are determined directly via measurements of the internal field inside the normal state domains. No assumptions or introduction of any type of measurement criteria are needed.
Experiments performed on a 'classical' type-I superconductor, a cylindrically shaped $β-$Sn sample, allowed to reconstruct the full $B-T$ phase diagram. The zero-temperature value of the thermodynamic critical field $B_{\rm c}(0)=30.578(6)$ mT and the transition temperature $T_{\rm c}=3.717(3)$ K were determined and found to be in a good agreement with the literature data. An experimentally obtained demagnetization factor is in very good agreement with theoretical calculations of the demagnetization factor of a finite cylinder. The analysis of $B_{\rm c}(T)$ dependence within the framework of the phenomenological $α-$model allow to obtain the value of the superconducting energy gap $Δ=0.59(1)$ meV, of the electronic specific heat $γ_e=1.781(3)$ ${\rm mJ}/{\rm mol}\; {\rm K}^2$ and of the jump in the heat capacity ${ΔC(T_c)}/{γT_{\rm c}}=1.55(2)$.
△ Less
Submitted 10 May, 2019;
originally announced May 2019.
-
An ultracold neutron storage bottle for UCN density measurements
Authors:
G. Bison,
F. Burri,
M. Daum,
K. Kirch,
J. Krempel,
B. Lauss,
M. Meier,
D. Ries,
P. Schmidt-Wellenburg,
G. Zsigmond
Abstract:
We have developed a storage bottle for ultracold neutrons (UCN) in order to measure the UCN density at the beamports of the Paul Scherrer Institute's (PSI) UCN source. This paper describes the design, construction and commissioning of the robust and mobile storage bottle with a volume comparable to typical storage experiments 32 liter e.g. searching for an electric dipole moment of the neutron.
We have developed a storage bottle for ultracold neutrons (UCN) in order to measure the UCN density at the beamports of the Paul Scherrer Institute's (PSI) UCN source. This paper describes the design, construction and commissioning of the robust and mobile storage bottle with a volume comparable to typical storage experiments 32 liter e.g. searching for an electric dipole moment of the neutron.
△ Less
Submitted 6 June, 2016;
originally announced June 2016.
-
Dynamic stabilization of the magnetic field surrounding the neutron electric dipole moment spectrometer at the Paul Scherrer Institute
Authors:
S. Afach,
G. Bison,
K. Bodek,
F. Burri,
Z. Chowdhuri,
M. Daum,
M. Fertl,
B. Franke,
Z. Grujic,
V. Helaine,
R. Henneck,
M. Kasprzak,
K. Kirch,
H. -C. Koch,
A. Kozela,
J. Krempel,
B. Lauss,
T. Lefort,
Y. Lemiere,
M. Meier,
O. Naviliat-Cuncic,
F. M. Piegsa,
G. Pignol,
C. Plonka-Spehr,
P. N. Prashanth
, et al. (12 additional authors not shown)
Abstract:
The Surrounding Field Compensation (SFC) system described in this work is installed around the four-layer Mu-metal magnetic shield of the neutron electric dipole moment spectrometer located at the Paul Scherrer Institute. The SFC system reduces the DC component of the external magnetic field by a factor of about 20. Within a control volume of approximately 2.5m x 2.5m x 3m disturbances of the magn…
▽ More
The Surrounding Field Compensation (SFC) system described in this work is installed around the four-layer Mu-metal magnetic shield of the neutron electric dipole moment spectrometer located at the Paul Scherrer Institute. The SFC system reduces the DC component of the external magnetic field by a factor of about 20. Within a control volume of approximately 2.5m x 2.5m x 3m disturbances of the magnetic field are attenuated by factors of 5 to 50 at a bandwidth from $10^{-3}$ Hz up to 0.5 Hz, which corresponds to integration times longer than several hundreds of seconds and represent the important timescale for the nEDM measurement. These shielding factors apply to random environmental noise from arbitrary sources. This is achieved via a proportional-integral feedback stabilization system that includes a regularized pseudoinverse matrix of proportionality factors which correlates magnetic field changes at all sensor positions to current changes in the SFC coils.
△ Less
Submitted 28 August, 2014;
originally announced August 2014.
-
Copper coated carbon fiber reinforced plastics for high and ultra high vacuum applications
Authors:
F. Burri,
M. Fertl,
P. Feusi,
R. Henneck,
K. Kirch,
B. Lauss,
P. Ruettimann,
P. Schmidt-Wellenburg,
A. Schnabel,
J. Voigt,
J. Zenner,
G. Zsigmond
Abstract:
We have used copper-coated carbon fiber reinforced plastic (CuCFRP) for the construction of high and ultra-high vacuum recipients. The vacuum performance is found to be comparable to typical stainless steel used for this purpose. In test recipients we have reached pressures of 2E-8 mbar and measured a desorption rate of 1E-11 mbar*liter/s/cm^2; no degradation over time (2 years) has been found. Su…
▽ More
We have used copper-coated carbon fiber reinforced plastic (CuCFRP) for the construction of high and ultra-high vacuum recipients. The vacuum performance is found to be comparable to typical stainless steel used for this purpose. In test recipients we have reached pressures of 2E-8 mbar and measured a desorption rate of 1E-11 mbar*liter/s/cm^2; no degradation over time (2 years) has been found. Suitability for baking has been found to depend on the CFRP production process, presumably on the temperature of the autoclave curing. Together with other unique properties of CuCFRP such as low weight and being nearly non-magnetic, this makes it an ideal material for many high-end vacuum applications.
△ Less
Submitted 12 August, 2013;
originally announced August 2013.
