Showing 1–43 of 43 results for author: Burns, S

Design and Control of an Energy Accumulative Hop** Robot

Authors: Samuel Burns, Matthew Woodward

Abstract: Jum** and hop** locomotion are efficient means of traversing unstructured rugged terrain with the former being the focus of roboticists. This focus has led to significant performance and understanding in jum** robots but with limited practical applications as they require significant time between jumps to store energy, thus relegating jum** to a secondary role in locomotion. Hop** locomo… ▽ More Jum** and hop** locomotion are efficient means of traversing unstructured rugged terrain with the former being the focus of roboticists. This focus has led to significant performance and understanding in jum** robots but with limited practical applications as they require significant time between jumps to store energy, thus relegating jum** to a secondary role in locomotion. Hop** locomotion, however, can preserve and transfer energy to subsequent hops without long energy storage periods. Therefore, hop** has the potential to be far more energy efficient and agile than jum**. However, to date, only a single untethered hop** robot exists with limited payload and hop** heights (< 1 meter). This is due to the added design and control complexity inherent in the requirements to input energy during dynamic locomotion and control the orientation of the system throughout the hop** cycle, resulting in low energy input and control torques; a redevelopment from basic principles is necessary to advance the capabilities of hop** robots. Here we report hop** robot design principles for efficient and robust systems with high energy input and control torques that are validated through analytical, simulation, and experimental results. The resulting robot (MultiMo-MHR) can hop nearly 4 meters (> 6 times the current state-of-the-art); and is only limited by the impact mechanics and not energy input. The results also directly contradict a recent work that concluded hop** with aerodynamic energy input would be less efficient than flight for hops greater than 0.4 meters. △ Less

Submitted 13 December, 2023; originally announced December 2023.

Comments: 10 pages, 6 figures

Experimental investigation of Lord Kelvins isentropic cooling and heating expression in tensile bars for two engineering alloys

Authors: S. J. Burns, C. E. Pratt, J. Carrock, J-P Gagnon, A. B. Sefkow

Abstract: Solids when rapidly and elastically stressed change temperature, the effect proposed by Lord Kelvin is adiabatic thermo-elastic cooling or heating depending on the sign of the stress. A fast sensitive IR camera has measured temperature both decreasing and increasing. Temperature measurements made from the reversible, elastic part of the stress-strain curve during fast uniaxial tensile loading have… ▽ More Solids when rapidly and elastically stressed change temperature, the effect proposed by Lord Kelvin is adiabatic thermo-elastic cooling or heating depending on the sign of the stress. A fast sensitive IR camera has measured temperature both decreasing and increasing. Temperature measurements made from the reversible, elastic part of the stress-strain curve during fast uniaxial tensile loading have been investigated. The isentropic temperature cooling from the loading curve is recovered by heating after the specimen fractures when the load is released. These measurements establish for the first time isentropic thermal recovery in two engineering alloys. The materials tested are an AISI 4340 steel and an aluminum 2024 alloy. Measurements of the isentropic thermo-elastic stress cooling are -0.61 K/GPa for steel and -1.7 K/GPa for aluminum alloy. The isentropic thermo-elastic stress heating is -1.16 K/GPa for steel and -1.6 K/GPa for aluminum alloy. The isentropic, elastic part of the temperature is fully recoverable even after extensive plastic deformation upon fracture. △ Less

Submitted 10 November, 2023; originally announced November 2023.

The Issues with Journal Issues: Let Journals Be Digital Libraries

Authors: C. Sean Burns

Abstract: Science depends on a communication system, and today that is largely provided by digital technologies such as the internet and web. Despite that digital technologies provide the infrastructure for that communication system, peer-reviewed journals continue to mimic workflows and processes from the print era. This paper focuses on one artifact from the print era, the journal issue, and describes how… ▽ More Science depends on a communication system, and today that is largely provided by digital technologies such as the internet and web. Despite that digital technologies provide the infrastructure for that communication system, peer-reviewed journals continue to mimic workflows and processes from the print era. This paper focuses on one artifact from the print era, the journal issue, and describes how this artifact has been detrimental to the communication of science and therefore to science itself. To replace the journal issue, this paper argues that scholarly publishing and journals could more fully embrace digital technologies by creating digital libraries to present and organize scholarly output. △ Less

Submitted 2 January, 2023; originally announced January 2023.

Comments: 17 pages, submitted to Publications

Optomechanical ground-state cooling in a continuous and efficient electro-optic transducer

Authors: Benjamin M. Brubaker, Jonathan M. Kindem, Maxwell D. Urmey, Sarang Mittal, Robert D. Delaney, Peter S. Burns, Michael R. Vissers, Konrad W. Lehnert, Cindy A. Regal

Abstract: The demonstration of a quantum link between microwave and optical frequencies would be an important step towards the realization of a quantum network of superconducting processors. A major impediment to quantum electro-optic transduction in all platforms explored to date is noise added by thermal occupation of modes involved in the transduction process, and it has proved difficult to realize low t… ▽ More The demonstration of a quantum link between microwave and optical frequencies would be an important step towards the realization of a quantum network of superconducting processors. A major impediment to quantum electro-optic transduction in all platforms explored to date is noise added by thermal occupation of modes involved in the transduction process, and it has proved difficult to realize low thermal occupancy concurrently with other desirable features like high duty cycle and high efficiency. In this work, we present an efficient and continuously operating electro-optomechanical transducer whose mechanical mode has been optically sideband-cooled to its quantum ground state. The transducer achieves a maximum efficiency of 47% and minimum input-referred added noise of 3.2 photons in upconversion. Moreover, the thermal occupancy of the transducer's microwave mode is minimally affected by continuous laser illumination with power more than two orders of magnitude greater than that required for optomechanical ground-state cooling. △ Less

Submitted 26 December, 2021; originally announced December 2021.

Comments: 24 pages, 10 figures

A Highly Configurable Hardware/Software Stack for DNN Inference Acceleration

Authors: Suvadeep Banerjee, Steve Burns, Pasquale Cocchini, Abhijit Davare, Shweta Jain, Desmond Kirkpatrick, Anton Sorokin, ** Yang, Zhenkun Yang

Abstract: This work focuses on an efficient Agile design methodology for domain-specific accelerators. We employ feature-by-feature enhancement of a vertical development stack and apply it to the TVM/VTA inference accelerator. We have enhanced the VTA design space and enabled end-to-end support for additional workloads. This has been accomplished by augmenting the VTA micro-architecture and instruction set… ▽ More This work focuses on an efficient Agile design methodology for domain-specific accelerators. We employ feature-by-feature enhancement of a vertical development stack and apply it to the TVM/VTA inference accelerator. We have enhanced the VTA design space and enabled end-to-end support for additional workloads. This has been accomplished by augmenting the VTA micro-architecture and instruction set architecture (ISA), as well as by enhancing the TVM compilation stack to support a wide range of VTA configs. The VTA tsim implementation (CHISEL-based) has been enhanced with fully pipelined versions of the ALU/GEMM execution units. In tsim, memory width can now range between 8-64 bytes. Field widths have been made more flexible to support larger scratchpads. New instructions have been added: element-wise 8-bit multiplication to support depthwise convolution, and load with a choice of pad values to support max pooling. Support for more layers and better double buffering has also been added. Fully pipelining ALU/GEMM helps significantly: 4.9x fewer cycles with minimal area change to run ResNet-18 under the default config. Configs featuring a further 11.5x decrease in cycle count at a cost of 12x greater area can be instantiated. Many points on the area-performance pareto curve are shown, showcasing the balance of execution unit sizing, memory interface width, and scratchpad sizing. Finally, VTA is now able to run Mobilenet 1.0 and all layers for ResNets, including the previously disabled pooling and fully connected layers. The TVM/VTA architecture has always featured end-to-end workload evaluation on RTL in minutes. With our modifications, it now offers a much greater number of feasible configurations with a wide range of cost vs. performance. All capabilities mentioned are available in opensource forks while a subset of these capabilities have already been upstreamed. △ Less

Submitted 29 November, 2021; originally announced November 2021.

Non-destructive optical readout of a superconducting qubit

Authors: Robert D. Delaney, Maxwell D. Urmey, Sarang Mittal, Benjamin M. Brubaker, Jonathan M. Kindem, Peter S. Burns, Cindy A. Regal, Konrad W. Lehnert

Abstract: Entangling superconducting quantum processors via light would enable new means of secure communication and distributed quantum computing. However, transducing quantum signals between these disparate regimes of the electromagnetic spectrum remains an outstanding goal, and interfacing superconducting qubits with electro-optic transducers presents significant challenges due to the deleterious effects… ▽ More Entangling superconducting quantum processors via light would enable new means of secure communication and distributed quantum computing. However, transducing quantum signals between these disparate regimes of the electromagnetic spectrum remains an outstanding goal, and interfacing superconducting qubits with electro-optic transducers presents significant challenges due to the deleterious effects of optical photons on superconductors. Moreover, many remote entanglement protocols require multiple qubit gates both preceding and following the upconversion of the quantum state, and thus an ideal transducer should leave the state of the qubit unchanged: more precisely, the backaction from the transducer on the qubit should be minimal. Here we demonstrate non-destructive optical readout of a superconducting transmon qubit via a continuously operated electro-optic transducer. The modular nature of the transducer and circuit QED system used in this work enable complete isolation of the qubit from optical photons, and the backaction on the qubit from the transducer is less than that imparted by thermal radiation from the environment. Moderate improvements in transducer bandwidth and added noise will enable us to leverage the full suite of tools available in circuit QED to demonstrate transduction of non-classical signals from a superconducting qubit to the optical domain. △ Less

Submitted 18 October, 2021; originally announced October 2021.

The Location of Optimal Object Colors with More Than Two Transitions (Preprint)

Authors: Scott A. Burns

Abstract: The chromaticity diagram associated with the CIE 1931 color matching functions is shown to be slightly non-convex. While having no impact on practical colorimetric computations, the non-convexity does have a significant impact on the shape of some optimal object color reflectance distributions associated with the outer surface of the object color solid. Instead of the usual two-transition Schrodin… ▽ More The chromaticity diagram associated with the CIE 1931 color matching functions is shown to be slightly non-convex. While having no impact on practical colorimetric computations, the non-convexity does have a significant impact on the shape of some optimal object color reflectance distributions associated with the outer surface of the object color solid. Instead of the usual two-transition Schrodinger form, many optimal colors exhibit higher transition counts. A linear programming formulation is developed and is used to locate where these higher-transition optimal object colors reside on the object color solid surface. The regions of higher transition count appear to have a point-symmetric complementary structure. The final peer-reviewed version (to appear) contains additional material concerning convexification of the color-matching functions and and additional analysis of modern "physiologically-relevant" CMFs transformed from cone fundamentals. △ Less

Submitted 14 May, 2021; v1 submitted 11 March, 2021; originally announced March 2021.

Comments: 5/14/21 version adds notice of acceptance for publication and changes made in final version

An empirical approach to measuring interface energies in mixed-phase bismuth ferrite

Authors: Stuart R. Burns, Oliver Paull, Ralph Bulanadi, Christie Lau, Daniel Sando, J. Marty Gregg, Nagarajan Valanoor

Abstract: In complex oxide heteroepitaxy, strain engineering is a powerful tool to obtain phases in thin films that may be otherwise unstable in bulk. A successful example of this approach is mixed phase bismuth ferrite (BiFeO3) epitaxial thin films. The coexistence of a tetragonal-like (T-like) matrix and rhombohedral-like (R-like) striations provides an enhanced electromechanical response, along with othe… ▽ More In complex oxide heteroepitaxy, strain engineering is a powerful tool to obtain phases in thin films that may be otherwise unstable in bulk. A successful example of this approach is mixed phase bismuth ferrite (BiFeO3) epitaxial thin films. The coexistence of a tetragonal-like (T-like) matrix and rhombohedral-like (R-like) striations provides an enhanced electromechanical response, along with other attractive functional behaviors. In this paper, we compare the energetics associated with two thickness dependent strain relaxation mechanisms in this system: domain walls arising from monoclinic distortion in the T-like phase, and the interphase boundary between the host T-like matrix and tilted R-like phases. Combining x-ray diffraction measurements with scanning probe microscopy, we extract quantitative values using an empirical energy balance approach. The domain wall and phase boundary energies are found to be 113 $\pm$ 21 and 426 $\pm$ 23 mJ.m$^{-2}$, respectively. These numerical estimates will help us realize designer phase boundaries in multiferroics, which possess colossal responses to external stimuli, attractive for a diverse range of functional applications. △ Less

Submitted 22 February, 2021; v1 submitted 13 January, 2021; originally announced January 2021.

Comments: 21 pages, 5 figures. Submitted to Phys. Rev. Mater

Journal ref: Phys. Rev. Materials 5, 034404 (2021)

ALIGN: A System for Automating Analog Layout

Authors: Tonmoy Dhar, Kishor Kunal, Yaguang Li, Meghna Madhusudan, Jitesh Poojary, Arvind K. Sharma, Wenbin Xu, Steven M. Burns, Ramesh Harjani, Jiang Hu, Desmond A. Kirkpatrick, Parijat Mukherjee, Sachin S. Sapatnekar, Soner Yaldiz

Abstract: ALIGN ("Analog Layout, Intelligently Generated from Netlists") is an open-source automatic layout generation flow for analog circuits. ALIGN translates an input SPICE netlist to an output GDSII layout, specific to a given technology, as specified by a set of design rules. The flow first automatically detects hierarchies in the circuit netlist and translates layout synthesis to a problem of hierarc… ▽ More ALIGN ("Analog Layout, Intelligently Generated from Netlists") is an open-source automatic layout generation flow for analog circuits. ALIGN translates an input SPICE netlist to an output GDSII layout, specific to a given technology, as specified by a set of design rules. The flow first automatically detects hierarchies in the circuit netlist and translates layout synthesis to a problem of hierarchical block assembly. At the lowest level, parameterized cells are generated using an abstraction of the design rules; these blocks are then assembled under geometric and electrical constraints to build the circuit layout. ALIGN has been applied to generate layouts for a diverse set of analog circuit families: low frequency analog blocks, wireline circuits, wireless circuits, and power delivery circuits. △ Less

Submitted 24 August, 2020; originally announced August 2020.

Linear Dielectric Thermodynamics: A New Universal Law for Optical, Dielectric Constants

Authors: S. J. Burns

Abstract: Linear dielectric thermodynamics are formally developed to explore the isothermal and adiabatic temperature - pressure dependence of dielectric constants. The refractive index of optical materials is widely measured in the literature: it is both temperature and pressure dependent. The argument to establish the dielectric constant's isentropic temperature dependence is a thermodynamic one and is… ▽ More Linear dielectric thermodynamics are formally developed to explore the isothermal and adiabatic temperature - pressure dependence of dielectric constants. The refractive index of optical materials is widely measured in the literature: it is both temperature and pressure dependent. The argument to establish the dielectric constant's isentropic temperature dependence is a thermodynamic one and is thus applicable to all physical models that describe electron clouds and electronic resonances within materials. The isentropic slope of the displacement field versus the electric field at all temperatures is described by an adiabatic dielectric constant in an energy-per-unit mass system. This slope is shown through the electronic part of the entropy to be unstable at high temperatures due to the change in the curvature of the temperature dependence of the dielectric constant. The electronic entropy contribution for optical, thermo-electro materials has negative heat capacities which are unacceptable. The dielectric constant's temperature and pressure dependence is predicted to be only dependent on the specific volume so isentropes are always positive. A new universal form for the dielectric constant follows from this hypothesis: the dielectric constant is proportional to the square root of the specific volume. △ Less

Submitted 10 June, 2020; originally announced June 2020.

Comments: 32 pages, 6 figures plus 8 in appendices, 3 tables, 4 appendices

Universal Law for the Elastic Moduli of Solids and Structures

Authors: S. J. Burns, Sean P. Burns

Abstract: A law previously found for shear moduli of crystalline materials is developed and extended to all elastic moduli in solids and structures. Shear moduli were previously shown to depend only on specific volume. The bulk moduli of many materials and structures are now predicted analytically and empirically shown with unerring accuracy by observing the elasticity as a specific volume power law. The la… ▽ More A law previously found for shear moduli of crystalline materials is developed and extended to all elastic moduli in solids and structures. Shear moduli were previously shown to depend only on specific volume. The bulk moduli of many materials and structures are now predicted analytically and empirically shown with unerring accuracy by observing the elasticity as a specific volume power law. The law is supported by experimental evidence from: foams, Schneebeli 2-dimensional graphene mats, metamaterials, fully dense metals, ceramics and minerals. This new, generalized, universal, elastic moduli law always describes materials that support shear stresses i.e., solids; it is shown that all elastic moduli are directly dependent only on the specific volume. △ Less

Submitted 10 June, 2020; originally announced June 2020.

Comments: 22 pages, 8 figures, 1 Table and 1 Appendix

Journal ref: Int J Sol Str, 279, 2023, 112347

Leveraging the Super Instruction Architecture to Develop Massively Parallel Computational and Environmental Chemistry Applications

Authors: Jason N. Byrd, Stephen E. Masters, Douglas S. Burns, Victor F. Lotrich, Beverly A Sanders

Abstract: The task of develo** high performing parallel software must be made easier and more cost effective in order to fully exploit existing and emerging large scale computer systems for the advancement of science. The Super Instruction Architecture is a parallel programming platform geared towards applications that need to manage large amounts of data stored in potentially sparse multidimensional arra… ▽ More The task of develo** high performing parallel software must be made easier and more cost effective in order to fully exploit existing and emerging large scale computer systems for the advancement of science. The Super Instruction Architecture is a parallel programming platform geared towards applications that need to manage large amounts of data stored in potentially sparse multidimensional arrays during calculations. The SIA platform was originally designed for the Quantum Chemistry software package ACESIII. More recently, the SIA was reimplemented to overcome limitations in the original ACESIII program. It has now been successfully employed in the new Aces4 Quantum Chemistry software package and the development of the atmospheric transport application MATLOC, thus demonstrating the versatility of the SIA approach. MATLOC calculates transport and dispersion of mass over regions in the range of 100-1000s of square kilometers and is a significant improvement over existing community codes. This paper describes results from both the transport and dispersion application as well as some difficult Quantum Chemistry open shell coupled cluster benchmark calculations using Aces4. △ Less

Submitted 3 March, 2020; originally announced March 2020.

Interactive Multi-User 3D Visual Analytics in Augmented Reality

Authors: Wanze Xie, Yining Liang, Janet Johnson, Andrea Mower, Samuel Burns, Colleen Chelini, Paul D Alessandro, Nadir Weibel, Jürgen P. Schulze

Abstract: This publication reports on a research project in which we set out to explore the advantages and disadvantages augmented reality (AR) technology has for visual data analytics. We developed a prototype of an AR data analytics application, which provides users with an interactive 3D interface, hand gesture-based controls and multi-user support for a shared experience, enabling multiple people to col… ▽ More This publication reports on a research project in which we set out to explore the advantages and disadvantages augmented reality (AR) technology has for visual data analytics. We developed a prototype of an AR data analytics application, which provides users with an interactive 3D interface, hand gesture-based controls and multi-user support for a shared experience, enabling multiple people to collaboratively visualize, analyze and manipulate data with high dimensional features in 3D space. Our software prototype, called DataCube, runs on the Microsoft HoloLens - one of the first true stand-alone AR headsets, through which users can see computer-generated images overlaid onto real-world objects in the user's physical environment. Using hand gestures, the users can select menu options, control the 3D data visualization with various filtering and visualization functions, and freely arrange the various menus and virtual displays in their environment. The shared multi-user experience allows all participating users to see and interact with the virtual environment, changes one user makes will become visible to the other users instantly. As users engage together they are not restricted from observing the physical world simultaneously and therefore they can also see non-verbal cues such as gesturing or facial reactions of other users in the physical environment. The main objective of this research project was to find out if AR interfaces and collaborative analysis can provide an effective solution for data analysis tasks, and our experience with our prototype system confirms this. △ Less

Submitted 12 February, 2020; originally announced February 2020.

Comments: In Proceedings of IS&T The Engineering Reality of Virtual Reality 2020

ACM Class: H.5.1; I.3.8; J.1

Journal ref: Electronic Imaging, The Engineering Reality of Virtual Reality 2020, pp. 363-1-363-6(6)

Analysis of membrane phononic crystals with wide bandgaps and low-mass defects

Authors: Chris Reetz, Ran Fischer, Gabriel G. T. Assumpcao, Dylan P. McNally, Peter S. Burns, Jack C. Sankey, Cindy A. Regal

Abstract: We present techniques to model and design membrane phononic crystals with low-mass defects, optimized for force sensing. Further, we identify the importance of the phononic crystal mass contrast as it pertains to the size of acoustic bandgaps and to the dissipation properties of defect modes. In particular, we quantify the tradeoff between high mass contrast phononic crystals with their associated… ▽ More We present techniques to model and design membrane phononic crystals with low-mass defects, optimized for force sensing. Further, we identify the importance of the phononic crystal mass contrast as it pertains to the size of acoustic bandgaps and to the dissipation properties of defect modes. In particular, we quantify the tradeoff between high mass contrast phononic crystals with their associated robust acoustic isolation, and a reduction of soft clam** of the defect mode. We fabricate a set of phononic crystals with a variety of defect geometries out of high stress stoichiometric silicon nitride membranes, and measured at both room temperature and 4 K in order to characterize the dissipative pathways across a variety of geometries. Analysis of these devices highlights a number of design principles integral to the implementation of low-mass, low-dissipation mechanical modes into optomechanical systems. △ Less

Submitted 26 June, 2019; originally announced June 2019.

Comments: 12 pages, 11 figures

Journal ref: Phys. Rev. Applied 12, 044027 (2019)

Chromatic Adaptation Transform by Spectral Reconstruction (Preprint)

Authors: Scott A Burns

Abstract: A color appearance model (CAM) is an advanced colorimetric tool used to predict color appearance under a wide variety of viewing conditions. A chromatic adaptation transform (CAT) is an integral part of a CAM. Its role is to predict "corresponding colors," that is, a pair of colors that have the same color appearance when viewed under different illuminants, after partial or full adaptation to each… ▽ More A color appearance model (CAM) is an advanced colorimetric tool used to predict color appearance under a wide variety of viewing conditions. A chromatic adaptation transform (CAT) is an integral part of a CAM. Its role is to predict "corresponding colors," that is, a pair of colors that have the same color appearance when viewed under different illuminants, after partial or full adaptation to each illuminant. Modern CATs perform well when applied to a limited range of illuminant pairs and a limited range of source (test) colors. However, they can fail if operated outside these ranges. For imaging applications, it is important to have a CAT that can operate on any real color and illuminant pair without failure. This paper proposes a new CAT that does not operate on the standard von Kries model of adaptation. Instead it relies on spectral reconstruction and how these reconstructions behave with respect to different illuminants. It is demonstrated that the proposed CAT is immune to some of the limitations of existing CATs (such as producing colors with negative tristimulus values). The proposed CAT does not use established empirical corresponding-color datasets to optimize performance, as most modern CATs do, yet it performs as well as or better than the most recent CATs when tested against the corresponding-color datasets. This increase in robustness comes at the expense of additional complexity and computational effort. If robustness is of prime importance, then the proposed method may be justifiable. △ Less

Submitted 28 September, 2019; v1 submitted 26 February, 2019; originally announced February 2019.

Comments: Ver 2 adds the abstract. Ver 3 gives attribution to Eq 1. Ver 4 adds publication notice. Ver 5 corrects Table 4. Ver 6 adds email address, date, and updates publication notice. Ver 7 adds link to full text of the final published version at Color Res Appl. Ver 8 adds citation of final publication

Journal ref: Color Res Appl. 2019;44(5):682-693

77 New Thermodynamic Identities among Crystalline Elastic Material Properties Leading to a Shear Modulus Constitutive Law in Isotropic Solids

Authors: S. J. Burns

Abstract: Thermodynamics of crystalline materials is analyzed using strain volumes, an incremental tensorial state variable which is the volume per unit mass multiplied by the incremental strain. Thermodynamics of crystalline materials is analyzed using strain volumes, an incremental tensorial state variable which is the volume per unit mass multiplied by the incremental strain. △ Less

Submitted 26 July, 2018; originally announced July 2018.

Comments: 28 Pages, 5 large tables and 2 figures

Cut-free Completeness for Modular Hypersequent Calculi for Modal Logics K, T, and D

Authors: Samara Burns, Richard Zach

Abstract: We investigate a recent proposal for modal hypersequent calculi. The interpretation of relational hypersequents incorporates an accessibility relation along the hypersequent. These systems give the same interpretation of hypersequents as Lellman's linear nested sequents, but were developed independently by Restall for S5 and extended to other normal modal logics by Parisi. The resulting systems ob… ▽ More We investigate a recent proposal for modal hypersequent calculi. The interpretation of relational hypersequents incorporates an accessibility relation along the hypersequent. These systems give the same interpretation of hypersequents as Lellman's linear nested sequents, but were developed independently by Restall for S5 and extended to other normal modal logics by Parisi. The resulting systems obey Dosen's principle: the modal rules are the same across different modal logics. Different modal systems only differ in the presence or absence of external structural rules. With the exception of S5, the systems are modular in the sense that different structural rules capture different properties of the accessibility relation. We provide the first direct semantical cut-free completeness proofs for K, T, and D, and show how this method fails in the case of B and S4. △ Less

Submitted 5 November, 2021; v1 submitted 23 May, 2018; originally announced May 2018.

MSC Class: 03B45; 03F05

Journal ref: The Review of Symbolic Logic 14 (2021) 910-929

Harnessing electro-optic correlations in an efficient mechanical converter

Authors: A. P. Higginbotham, P. S. Burns, M. D. Urmey, R. W. Peterson, N. S. Kampel, B. M. Brubaker, G. Smith, K. W. Lehnert, C. A. Regal

Abstract: An optical network of superconducting quantum bits (qubits) is an appealing platform for quantum communication and distributed quantum computing, but develo** a quantum-compatible link between the microwave and optical domains remains an outstanding challenge. Operating at $T < 100$ mK temperatures, as required for quantum electrical circuits, we demonstrate a mechanically-mediated microwave-opt… ▽ More An optical network of superconducting quantum bits (qubits) is an appealing platform for quantum communication and distributed quantum computing, but develo** a quantum-compatible link between the microwave and optical domains remains an outstanding challenge. Operating at $T < 100$ mK temperatures, as required for quantum electrical circuits, we demonstrate a mechanically-mediated microwave-optical converter with 47$\%$ conversion efficiency, and use a feedforward protocol to reduce added noise to 38 photons. The feedforward protocol harnesses our discovery that noise emitted from the two converter output ports is strongly correlated because both outputs record thermal motion of the same mechanical mode. We also discuss a quantum feedforward protocol that, given high system efficiencies, allows quantum information to be transferred even when thermal phonons enter the mechanical element faster than the electro-optic conversion rate. △ Less

Submitted 17 September, 2019; v1 submitted 18 December, 2017; originally announced December 2017.

Comments: Main text: 7 pages 4 figures. Supplement: 12 pages 7 figures

Journal ref: Nature Physics 14, 1038-1042 (2018)

An Undergraduate Test of Gravitational Time Dilation

Authors: Brian Patterson, Mario Serna, Jerry F. Sell, M. Alina Gearba, Robert Olesen, Patrick O'Shea, Jonathan Schiller, David Emanuel, M. Shane Burns, Michael D. Leveille, Armand R. Dominguez, Brian B. Gebhard, Samuel E. Huestis, Jeffrey Steele

Abstract: Students at Colorado College and cadets at the US Air Force Academy have conducted an experimental test of gravitational time dilation. This relativistic effect, highlighted in the movie Interstellar, causes clocks to tick more slowly near massive objects. A measurement of gravitational time dilation was made by comparing signals generated by a GPS frequency standard, which is based on sea-level t… ▽ More Students at Colorado College and cadets at the US Air Force Academy have conducted an experimental test of gravitational time dilation. This relativistic effect, highlighted in the movie Interstellar, causes clocks to tick more slowly near massive objects. A measurement of gravitational time dilation was made by comparing signals generated by a GPS frequency standard, which is based on sea-level time, to a cesium-beam frequency standard located at three different elevations above sea level. The effect is small but observable; for the highest elevation studied (4302 m on the summit of Pikes Peak), a local clock ticks only 41 ns/day faster than a sea-level clock. Our results are consistent with the predictions of general relativity. We also discuss implications of gravitational time dilation on GPS operations. △ Less

Submitted 19 October, 2017; originally announced October 2017.

Comments: 3 pages, 2 figures

Subtractive Color Mixture Computation

Authors: Scott Allen Burns

Abstract: Modeling subtractive color mixture (e.g., the way that paints mix) is difficult when working with colors described only by three-dimensional color space values, such as RGB. Although RGB values are sufficient to describe a specific color sensation, they do not contain enough information to predict the RGB color that would result from a subtractive mixture of two specified RGB colors. Methods do ex… ▽ More Modeling subtractive color mixture (e.g., the way that paints mix) is difficult when working with colors described only by three-dimensional color space values, such as RGB. Although RGB values are sufficient to describe a specific color sensation, they do not contain enough information to predict the RGB color that would result from a subtractive mixture of two specified RGB colors. Methods do exist for accurately modeling subtractive mixture, such as the Kubelka-Munk equations, but require extensive spectrophotometric measurements of the mixed components, making them unsuitable for many computer graphics applications. This paper presents a strategy for modeling subtractive color mixture given only the RGB information of the colors being mixed, written for a general audience. The RGB colors are first transformed to generic, representative spectral distributions, and then this spectral information is used to perform the subtractive mixture, using the weighted arithmetic-geometric mean. This strategy provides reasonable, representative subtractive mixture colors with only modest computational effort and no experimental measurements. As such, it provides a useful way to model subtractive color mixture in computer graphics applications. △ Less

Submitted 17 October, 2017; originally announced October 2017.

ACM Class: I.3.7

Generating Reflectance Curves from sRGB Triplets

Authors: Scott Allen Burns

Abstract: The color sensation evoked by an object depends on both the spectral power distribution of the illumination and the reflectance properties of the object being illuminated. The color sensation can be characterized by three color-space values, such as XYZ, RGB, HSV, L*a*b*, etc. It is straightforward to compute the three values given the illuminant and reflectance curves. The converse process of com… ▽ More The color sensation evoked by an object depends on both the spectral power distribution of the illumination and the reflectance properties of the object being illuminated. The color sensation can be characterized by three color-space values, such as XYZ, RGB, HSV, L*a*b*, etc. It is straightforward to compute the three values given the illuminant and reflectance curves. The converse process of computing a reflectance curve given the color-space values and the illuminant is complicated by the fact that an infinite number of different reflectance curves can give rise to a single set of color-space values (metamerism). This paper presents five algorithms for generating a reflectance curve from a specified sRGB triplet, written for a general audience. The algorithms are designed to generate reflectance curves that are similar to those found with naturally occurring colored objects. The computed reflectance curves are compared to a database of thousands of reflectance curves measured from paints and pigments available both commercially and in nature, and the similarity is quantified. One particularly useful application of these algorithms is in the field of computer graphics, where modeling color transformations sometimes requires wavelength-specific information, such as when modeling subtractive color mixture. △ Less

Submitted 9 January, 2020; v1 submitted 11 October, 2017; originally announced October 2017.

Comments: v3 minor editing to clarify some points, and some webpage link updates, v4 adds the LHTSS method, v5 indicates LHTSS should be preferred to ILLSS generally

ACM Class: I.2.10; I.3.7; I.4.8

Measurement of Gravitational Time Dilation: An Undergraduate Research Project

Authors: M. Shane Burns, Michael D. Leveille, Armand R. Dominguez, Brian B. Gebhard, Samuel E. Huestis, Jeffery Steele, Brian Patterson, Jerry F. Sell, Mario Serna, M. Alina Gearba, Robert Olesen, Patrick O'Shea, Jonathan Schiller

Abstract: General relativity predicts that clocks run more slowly near massive objects. The effect is small---a clock at sea level lags behind one 1000 m above sea level by only 9.4 ns/day. Here, we demonstrate that a measurement of this effect can be done by undergraduate students. Our paper describes an experiment conducted by undergraduate researchers at Colorado College and the United States Air Force A… ▽ More General relativity predicts that clocks run more slowly near massive objects. The effect is small---a clock at sea level lags behind one 1000 m above sea level by only 9.4 ns/day. Here, we demonstrate that a measurement of this effect can be done by undergraduate students. Our paper describes an experiment conducted by undergraduate researchers at Colorado College and the United States Air Force Academy to measure gravitational time dilation. The measurement was done by comparing the signals generated by a GPS frequency standard (sea-level time) to a Cs-beam frequency standard at seven different altitudes above sea level. We found that our measurements are consistent with the predictions of general relativity. △ Less

Submitted 12 July, 2017; v1 submitted 1 July, 2017; originally announced July 2017.

Reconfigurable re-entrant cavity for wireless coupling to an electro-optomechanical device

Authors: Tim Menke, Peter S. Burns, Andrew P. Higginbotham, Nir S. Kampel, Robert W. Peterson, Katarina Cicak, Raymond W. Simmonds, Cindy A. Regal, Konrad W. Lehnert

Abstract: An electro-optomechanical device capable of microwave-to-optics conversion has recently been demonstrated, with the vision of enabling optical networks of superconducting qubits. Here we present an improved converter design that uses a three-dimensional (3D) microwave cavity for coupling between the microwave transmission line and an integrated LC resonator on the converter chip. The new design si… ▽ More An electro-optomechanical device capable of microwave-to-optics conversion has recently been demonstrated, with the vision of enabling optical networks of superconducting qubits. Here we present an improved converter design that uses a three-dimensional (3D) microwave cavity for coupling between the microwave transmission line and an integrated LC resonator on the converter chip. The new design simplifies the optical assembly and decouples it from the microwave part of the setup. Experimental demonstrations show that the modular device assembly allows us to flexibly tune the microwave coupling to the converter chip while maintaining small loss. We also find that electromechanical experiments are not impacted by the additional microwave cavity. Our design is compatible with a high-finesse optical cavity and will improve optical performance. △ Less

Submitted 19 March, 2017; originally announced March 2017.

Comments: 6 pages, 4 figures

Journal ref: Review of Scientific Instruments 88, 094701 (2017)

A wide-band, active antenna system for long wavelength radio astronomy

Authors: Brian C. Hicks, Nagini Paravastu-Dalal, Kenneth P. Stewart, William C. Erickson, Paul S. Ray, Namir E. Kassim, Steve Burns, Tracy Clarke, Henrique Schmitt, Joe Craig, Jake Hartman, Kurt W. Weiler

Abstract: We describe an "active" antenna system for HF/VHF (long wavelength) radio astronomy that has been successfully deployed 256-fold as the first station (LWA1) of the planned Long Wavelength Array. The antenna system, consisting of crossed dipoles, an active balun/preamp, a support structure, and a ground screen has been shown to successfully operate over at least the band from 20 MHz (15 m wavelengt… ▽ More We describe an "active" antenna system for HF/VHF (long wavelength) radio astronomy that has been successfully deployed 256-fold as the first station (LWA1) of the planned Long Wavelength Array. The antenna system, consisting of crossed dipoles, an active balun/preamp, a support structure, and a ground screen has been shown to successfully operate over at least the band from 20 MHz (15 m wavelength) to 80 MHz (3.75 m wavelength) with a noise figure that is at least 6 dB better than the Galactic background emission noise temperature over that band. Thus, the goal to design and construct a compact, inexpensive, rugged, and easily assembled antenna system that can be deployed many-fold to form numerous large individual "stations" for the purpose of building a large, long wavelength synthesis array telescope for radio astronomical and ionospheric observations was met. △ Less

Submitted 1 October, 2012; originally announced October 2012.

Comments: 33 pages, 12 figures, accepted for publication in Publications of the Astronomical Society of the Pacific

The Murchison Widefield Array: the Square Kilometre Array Precursor at low radio frequencies

Authors: S. J. Tingay, R. Goeke, J. D. Bowman, D. Emrich, S. M. Ord, D. A. Mitchell, M. F. Morales, T. Booler, B. Crosse, D. Pallot, A. Wicenec, W. Arcus, D. Barnes, G. Bernardi, F. Briggs, S. Burns, J. D. Bunton, R. J. Cappallo, T. Colegate, B. E. Corey, A. Deshpande, L. deSouza, B. M. Gaensler, L. J. Greenhill, J. Hall , et al. (35 additional authors not shown)

Abstract: The Murchison Widefield Array (MWA) is one of three Square Kilometre Array Precursor telescopes and is located at the Murchison Radio-astronomy Observatory in the Murchison Shire of the mid-west of Western Australia, a location chosen for its extremely low levels of radio frequency interference. The MWA operates at low radio frequencies, 80-300 MHz, with a processed bandwidth of 30.72 MHz for both… ▽ More The Murchison Widefield Array (MWA) is one of three Square Kilometre Array Precursor telescopes and is located at the Murchison Radio-astronomy Observatory in the Murchison Shire of the mid-west of Western Australia, a location chosen for its extremely low levels of radio frequency interference. The MWA operates at low radio frequencies, 80-300 MHz, with a processed bandwidth of 30.72 MHz for both linear polarisations, and consists of 128 aperture arrays (known as tiles) distributed over a ~3 km diameter area. Novel hybrid hardware/software correlation and a real-time imaging and calibration systems comprise the MWA signal processing backend. In this paper the as-built MWA is described both at a system and sub-system level, the expected performance of the array is presented, and the science goals of the instrument are summarised. △ Less

Submitted 29 June, 2012; originally announced June 2012.

Comments: Submitted to PASA. 11 figures, 2 tables

Precision Measurement of The Most Distant Spectroscopically Confirmed Supernova Ia with the Hubble Space Telescope

Authors: D. Rubin, R. A. Knop, E. Rykoff, G. Aldering, R. Amanullah, K. Barbary, M. S. Burns, A. Conley, N. Connolly, S. Deustua, V. Fadeyev, H. K. Fakhouri, A. S. Fruchter, R. A. Gibbons, G. Goldhaber, A. Goobar, E. Y. Hsiao, X. Huang, M. Kowalski, C. Lidman, J. Meyers, J. Nordin, S. Perlmutter, C. Saunders, A. L. Spadafora , et al. (3 additional authors not shown)

Abstract: We report the discovery of a redshift 1.71 supernova in the GOODS North field. The Hubble Space Telescope (HST) ACS spectrum has almost negligible contamination from the host or neighboring galaxies. Although the rest frame sampled range is too blue to include any Si ii line, a principal component analysis allows us to confirm it as a Type Ia supernova with 92% confidence. A recent serendipitous a… ▽ More We report the discovery of a redshift 1.71 supernova in the GOODS North field. The Hubble Space Telescope (HST) ACS spectrum has almost negligible contamination from the host or neighboring galaxies. Although the rest frame sampled range is too blue to include any Si ii line, a principal component analysis allows us to confirm it as a Type Ia supernova with 92% confidence. A recent serendipitous archival HST WFC3 grism spectrum contributed a key element of the confirmation by giving a host-galaxy redshift of 1.713 +/- 0.007. In addition to being the most distant SN Ia with spectroscopic confirmation, this is the most distant Ia with a precision color measurement. We present the ACS WFC and NICMOS 2 photometry and ACS and WFC3 spectroscopy. Our derived supernova distance is in agreement with the prediction of LambdaCDM. △ Less

Submitted 8 January, 2013; v1 submitted 15 May, 2012; originally announced May 2012.

Comments: 13 pages, 6 figures, published in ApJ with updated analysis

Latent rank change detection for analysis of splice-junction microarrays with nonlinear effects

Authors: Jonathan Gelfond, Lee Ann Zarzabal, Tarea Burton, Suzanne Burns, Mari Sogayar, Luiz O. F. Penalva

Abstract: Alternative splicing of gene transcripts greatly expands the functional capacity of the genome, and certain splice isoforms may indicate specific disease states such as cancer. Splice junction microarrays interrogate thousands of splice junctions, but data analysis is difficult and error prone because of the increased complexity compared to differential gene expression analysis. We present Rank Ch… ▽ More Alternative splicing of gene transcripts greatly expands the functional capacity of the genome, and certain splice isoforms may indicate specific disease states such as cancer. Splice junction microarrays interrogate thousands of splice junctions, but data analysis is difficult and error prone because of the increased complexity compared to differential gene expression analysis. We present Rank Change Detection (RCD) as a method to identify differential splicing events based upon a straightforward probabilistic model comparing the over- or underrepresentation of two or more competing isoforms. RCD has advantages over commonly used methods because it is robust to false positive errors due to nonlinear trends in microarray measurements. Further, RCD does not depend on prior knowledge of splice isoforms, yet it takes advantage of the inherent structure of mutually exclusive junctions, and it is conceptually generalizable to other types of splicing arrays or RNA-Seq. RCD specifically identifies the biologically important cases when a splice junction becomes more or less prevalent compared to other mutually exclusive junctions. The example data is from different cell lines of glioblastoma tumors assayed with Agilent microarrays. △ Less

Submitted 15 April, 2011; originally announced April 2011.

Comments: Published in at http://dx.doi.org/10.1214/10-AOAS389 the Annals of Applied Statistics (http://www.imstat.org/aoas/) by the Institute of Mathematical Statistics (http://www.imstat.org)

Report number: IMS-AOAS-AOAS389

Journal ref: Annals of Applied Statistics 2011, Vol. 5, No. 1, 364-380

First Spectroscopic Imaging Observations of the Sun at Low Radio Frequencies with the Murchison Widefield Array Prototype

Authors: Divya Oberoi, Lynn D. Matthews, Iver H. Cairns, David Emrich, Vasili Lobzin, Colin J. Lonsdale, Edward H. Morgan, T. Prabu, Harish Vedantham, Randall B. Wayth, Andrew Williams, Christopher Williams, Stephen M. White, G. Allen, Wayne Arcus, David Barnes, Leonid Benkevitch, Gianni Bernardi, Judd D. Bowman, Frank H. Briggs, John D. Bunton, Steve Burns, Roger C. Cappallo, M. A. Clark, Brian E. Corey , et al. (45 additional authors not shown)

Abstract: We present the first spectroscopic images of solar radio transients from the prototype for the Murchison Widefield Array (MWA), observed on 2010 March 27. Our observations span the instantaneous frequency band 170.9-201.6 MHz. Though our observing period is characterized as a period of `low' to `medium' activity, one broadband emission feature and numerous short-lived, narrowband, non-thermal emis… ▽ More We present the first spectroscopic images of solar radio transients from the prototype for the Murchison Widefield Array (MWA), observed on 2010 March 27. Our observations span the instantaneous frequency band 170.9-201.6 MHz. Though our observing period is characterized as a period of `low' to `medium' activity, one broadband emission feature and numerous short-lived, narrowband, non-thermal emission features are evident. Our data represent a significant advance in low radio frequency solar imaging, enabling us to follow the spatial, spectral, and temporal evolution of events simultaneously and in unprecedented detail. The rich variety of features seen here reaffirms the coronal diagnostic capability of low radio frequency emission and provides an early glimpse of the nature of radio observations that will become available as the next generation of low frequency radio interferometers come on-line over the next few years. △ Less

Submitted 3 January, 2011; originally announced January 2011.

Comments: 15 pages, 5 figures, accepted for publication in Astrophysical Journal Letters. Movies for figures 4 and 5 available at http://www.mwatelescope.org/info/mwa_proto.html

Interferometric imaging with the 32 element Murchison Wide-field Array

Authors: S. M. Ord, D. A. Mitchell, R. B. Wayth, L. J. Greenhill, G. Bernardi, S. Gleadow, R. G. Edgar, M. A. Clark, G. Allen, W. Arcus, L. Benkevitch, J. D. Bowman, F. H. Briggs, J. D. Bunton, S. Burns, R. J. Cappallo, W. A. Coles, B. E. Corey, L. deSouza, S. S. Doeleman, M. Derome, A. Deshpande, D. Emrich, R. Goeke, M. R. Gopalakrishna , et al. (34 additional authors not shown)

Abstract: The Murchison Wide-field Array (MWA) is a low frequency radio telescope, currently under construction, intended to search for the spectral signature of the epoch of re-ionisation (EOR) and to probe the structure of the solar corona. Sited in Western Australia, the full MWA will comprise 8192 dipoles grouped into 512 tiles, and be capable of imaging the sky south of 40 degree declination, from 80 M… ▽ More The Murchison Wide-field Array (MWA) is a low frequency radio telescope, currently under construction, intended to search for the spectral signature of the epoch of re-ionisation (EOR) and to probe the structure of the solar corona. Sited in Western Australia, the full MWA will comprise 8192 dipoles grouped into 512 tiles, and be capable of imaging the sky south of 40 degree declination, from 80 MHz to 300 MHz with an instantaneous field of view that is tens of degrees wide and a resolution of a few arcminutes. A 32-station prototype of the MWA has been recently commissioned and a set of observations taken that exercise the whole acquisition and processing pipeline. We present Stokes I, Q, and U images from two ~4 hour integrations of a field 20 degrees wide centered on Pictoris A. These images demonstrate the capacity and stability of a real-time calibration and imaging technique employing the weighted addition of warped snapshots to counter extreme wide field imaging distortions. △ Less

Submitted 8 October, 2010; originally announced October 2010.

Comments: Accepted for publication in PASP. This is the draft before journal typesetting corrections and proofs so does contain formatting and journal style errors, also has with lower quality figures for space requirements

The Murchison Widefield Array

Authors: Daniel A. Mitchell, Lincoln J. Greenhill, Stephen M. Ord, Gianni Bernardi, Randall B. Wayth, Richard G. Edgar, Michael A. Clark, Kevin Dal, Hanspeter Pfister, Stewart J. Gleadow, W. Arcus, F. H. Briggs, L. Benkevitch, J. D. Bowman, J. D. Bunton, S. Burns, R. J. Cappallo, B. E. Corey, A. de Oliveira-Costa, L. Desouza, S. S. Doeleman, M. F. Derome, D. Emrich, M. Glossop, R. Goeke , et al. (35 additional authors not shown)

Abstract: It is shown that the excellent Murchison Radio-astronomy Observatory site allows the Murchison Widefield Array to employ a simple RFI blanking scheme and still calibrate visibilities and form images in the FM radio band. The techniques described are running autonomously in our calibration and imaging software, which is currently being used to process an FM-band survey of the entire southern sky. It is shown that the excellent Murchison Radio-astronomy Observatory site allows the Murchison Widefield Array to employ a simple RFI blanking scheme and still calibrate visibilities and form images in the FM radio band. The techniques described are running autonomously in our calibration and imaging software, which is currently being used to process an FM-band survey of the entire southern sky. △ Less

Submitted 15 August, 2010; originally announced August 2010.

Comments: Accepted for publication in Proceedings of Science [PoS(RFI2010)016]. 6 pages and 3 figures. Presented at RFI2010, the Third Workshop on RFI Mitigation in Radio Astronomy, 29-31 March 2010, Groningen, The Netherlands

Spectra and Light Curves of Six Type Ia Supernovae at 0.511 < z < 1.12 and the Union2 Compilation

Authors: R. Amanullah, C. Lidman, D. Rubin, G. Aldering, P. Astier, K. Barbary, M. S. Burns, A. Conley, K. S. Dawson, S. E. Deustua, M. Doi, S. Fabbro, L. Faccioli, H. K. Fakhouri, G. Folatelli, A. S. Fruchter, H. Furusawa, G. Garavini, G. Goldhaber, A. Goobar, D. E. Groom, I. Hook, D. A. Howell, N. Kashikawa, A. G. Kim , et al. (20 additional authors not shown)

Abstract: We report on work to increase the number of well-measured Type Ia supernovae (SNe Ia) at high redshifts. Light curves, including high signal-to-noise HST data, and spectra of six SNe Ia that were discovered during 2001 are presented. Additionally, for the two SNe with z>1, we present ground-based J-band photometry from Gemini and the VLT. These are among the most distant SNe Ia for which ground ba… ▽ More We report on work to increase the number of well-measured Type Ia supernovae (SNe Ia) at high redshifts. Light curves, including high signal-to-noise HST data, and spectra of six SNe Ia that were discovered during 2001 are presented. Additionally, for the two SNe with z>1, we present ground-based J-band photometry from Gemini and the VLT. These are among the most distant SNe Ia for which ground based near-IR observations have been obtained. We add these six SNe Ia together with other data sets that have recently become available in the literature to the Union compilation (Kowalski et al. 2008). We have made a number of refinements to the Union analysis chain, the most important ones being the refitting of all light curves with the SALT2 fitter and an improved handling of systematic errors. We call this new compilation, consisting of 557 supernovae, the Union2 compilation. The flat concordance LambdaCDM model remains an excellent fit to the Union2 data with the best fit constant equation of state parameter w=-0.997^{+0.050}_{-0.054} (stat) ^{+0.077}_{-0.082} (stat+sys\ together) for a flat universe, or w=-1.035^{+0.055}_{-0.059} (stat)^{+0.093}_{-0.097} (stat+sys together) with curvature. We also present improved constraints on w(z). While no significant change in w with redshift is detected, there is still considerable room for evolution in w. The strength of the constraints depend strongly on redshift. In particular, at z > 1, the existence and nature of dark energy are only weakly constrained by the data. △ Less

Submitted 10 April, 2010; originally announced April 2010.

Comments: 33 pages, 18 figures; accepted for publication in Astrophysical Journal. For data tables, code for cosmological analysis and full-resolution figures, see http://supernova.lbl.gov/Union/

Journal ref: Astrophys.J.716:712-738,2010

Constraining dust and color variations of high-z SNe using NICMOS on Hubble Space Telescope

Authors: S. Nobili, V. Fadeyev, G. Aldering, R. Amanullah, K. Barbary, M. S. Burns, K. S. Dawson, S. E. Deustua, L. Faccioli, A. S. Fruchter, G. Goldhaber, A. Goobar, I. Hook, D. A. Howell, A. G. Kim, R. A. Knop, C. Lidman, J. Meyers, P. E. Nugent, R. Pain, N. Panagia, S. Perlmutter, D. Rubin, A. L. Spadafora, M. Strovink , et al. (2 additional authors not shown)

Abstract: We present data from the Supernova Cosmology Project for five high redshift Type Ia supernovae (SNe Ia) that were obtained using the NICMOS infrared camera on the Hubble Space Telescope. We add two SNe from this sample to a rest-frame I-band Hubble diagram, doubling the number of high redshift supernovae on this diagram. This I-band Hubble diagram is consistent with a flat universe (Omega_Matter… ▽ More We present data from the Supernova Cosmology Project for five high redshift Type Ia supernovae (SNe Ia) that were obtained using the NICMOS infrared camera on the Hubble Space Telescope. We add two SNe from this sample to a rest-frame I-band Hubble diagram, doubling the number of high redshift supernovae on this diagram. This I-band Hubble diagram is consistent with a flat universe (Omega_Matter, Omega_Lambda= 0.29, 0.71). A homogeneous distribution of large grain dust in the intergalactic medium (replenishing dust) is incompatible with the data and is excluded at the 5 sigma confidence level, if the SN host galaxy reddening is corrected assuming R_V=1.75. We use both optical and infrared observations to compare photometric properties of distant SNe Ia with those of nearby objects. We find generally good agreement with the expected color evolution for all SNe except the highest redshift SN in our sample (SN 1997ek at z=0.863) which shows a peculiar color behavior. We also present spectra obtained from ground based telescopes for type identification and determination of redshift. △ Less

Submitted 30 August, 2009; v1 submitted 23 June, 2009; originally announced June 2009.

Comments: 30 pages, 10 figures; accepted for publication in ApJ; v2: revised to match the version in the journal

Journal ref: Astrophys.J.700:1415-1427,2009

The Murchison Widefield Array: Design Overview

Authors: Colin J. Lonsdale, Roger J. Cappallo, Miguel F. Morales, Frank H. Briggs, Leonid Benkevitch, Judd D. Bowman, John D. Bunton, Steven Burns, Brian E. Corey, Ludi deSouza, Sheperd S. Doeleman, Mark Derome, Avinash Deshpande, M. R. Gopalakrishna, Lincoln J. Greenhill, David Herne, Jacqueline N. Hewitt, P. A. Kamini, Justin C. Kasper, Barton B. Kincaid, Jonathan Kocz, Errol Kowald, Eric Kratzenberg, Deepak Kumar, Mervyn J. Lynch , et al. (23 additional authors not shown)

Abstract: The Murchison Widefield Array (MWA) is a dipole-based aperture array synthesis telescope designed to operate in the 80-300 MHz frequency range. It is capable of a wide range of science investigations, but is initially focused on three key science projects. These are detection and characterization of 3-dimensional brightness temperature fluctuations in the 21cm line of neutral hydrogen during the… ▽ More The Murchison Widefield Array (MWA) is a dipole-based aperture array synthesis telescope designed to operate in the 80-300 MHz frequency range. It is capable of a wide range of science investigations, but is initially focused on three key science projects. These are detection and characterization of 3-dimensional brightness temperature fluctuations in the 21cm line of neutral hydrogen during the Epoch of Reionization (EoR) at redshifts from 6 to 10, solar imaging and remote sensing of the inner heliosphere via propagation effects on signals from distant background sources,and high-sensitivity exploration of the variable radio sky. The array design features 8192 dual-polarization broad-band active dipoles, arranged into 512 tiles comprising 16 dipoles each. The tiles are quasi-randomly distributed over an aperture 1.5km in diameter, with a small number of outliers extending to 3km. All tile-tile baselines are correlated in custom FPGA-based hardware, yielding a Nyquist-sampled instantaneous monochromatic uv coverage and unprecedented point spread function (PSF) quality. The correlated data are calibrated in real time using novel position-dependent self-calibration algorithms. The array is located in the Murchison region of outback Western Australia. This region is characterized by extremely low population density and a superbly radio-quiet environment,allowing full exploitation of the instrumental capabilities. △ Less

Submitted 10 March, 2009; originally announced March 2009.

Comments: 9 pages, 5 figures, 1 table. Accepted for publication in Proceedings of the IEEE

Interpretation of the Cosmological Metric

Authors: Richard J. Cook, M. Shane Burns

Abstract: The cosmological Robertson-Walker metric of general relativity is often said to have the consequences that (1) the recessional velocity $v$ of a galaxy at proper distance $\ell$ obeys the Hubble law $v=H\ell$, and therefore galaxies at sufficiently great distance $\ell$ are receding faster than the speed of light $c$; (2) faster than light recession does not violate special relativity theory bec… ▽ More The cosmological Robertson-Walker metric of general relativity is often said to have the consequences that (1) the recessional velocity $v$ of a galaxy at proper distance $\ell$ obeys the Hubble law $v=H\ell$, and therefore galaxies at sufficiently great distance $\ell$ are receding faster than the speed of light $c$; (2) faster than light recession does not violate special relativity theory because the latter is not applicable to the cosmological problem, and because ``space itself is receding'' faster than $c$ at great distance, and it is velocity relative to local space that is limited by $c$, not the velocity of distant objects relative to nearby ones; (3) we can see galaxies receding faster than the speed of light; and (4) the cosmological redshift is not a Doppler shift, but is due to a stretching of photon wavelength during propagation in an expanding universe. We present a particular Robertson-Walker metric (an empty universe metric) for which a coordinate transformation shows that none of these interpretation necessarily holds. The resulting paradoxes of interpretation lead to a deeper understanding of the meaning of the cosmological metric. △ Less

Submitted 3 September, 2008; v1 submitted 18 March, 2008; originally announced March 2008.

Comments: REVTeX 4, 20 pages, accepted for publication in Am. J. Phys. Comments: edited version that will appear in the Am. J. Phys

Journal ref: Am.J.Phys.77:59-66,2009

Quantitative comparison between Type Ia supernova spectra at low and high redshifts: A case study

Authors: G. Garavini, G. Folatelli, S. Nobili, G. Aldering, R. Amanullah, P. Antilogus, P. Astier, G. Blanc, J. Bronder, M. S. Burns, A. Conley, S. E. Deustua, M. Doi, S. Fabbro, V. Fadeyev, R. Gibbons, G. Goldhaber, A. Goobar, D. E. Groom, I. Hook, D. A. Howell, N. Kashikawa, A. G. Kim, M. Kowalski, N. Kuznetsova , et al. (22 additional authors not shown)

Abstract: We develop a method to measure the strength of the absorption features in Type Ia supernova (SN Ia) spectra and use it to make a quantitative comparison between the spectra of Type Ia supernovae at low and high redshifts. In this case study, we apply the method to 12 high-redshift (0.212 < z < 0.912) SNe Ia observed by the Supernova Cosmology Project . Through measurements of the strengths of th… ▽ More We develop a method to measure the strength of the absorption features in Type Ia supernova (SN Ia) spectra and use it to make a quantitative comparison between the spectra of Type Ia supernovae at low and high redshifts. In this case study, we apply the method to 12 high-redshift (0.212 < z < 0.912) SNe Ia observed by the Supernova Cosmology Project . Through measurements of the strengths of these features and of the blueshift of the absorption minimum in Ca II H&K, we show that the spectra of the high-redshift SNe Ia are quantitatively similar to spectra of nearby SNe Ia (z < 0.15). One supernova in our high redshift sample, SN 2002fd at z=0.279, is found to have spectral characteristics that are associated with peculiar SN 1991T/SN 1999aa-like supernovae. △ Less

Submitted 24 March, 2007; originally announced March 2007.

Comments: accepted for publication on A&A

Spectra of High-Redshift Type Ia Supernovae and a Comparison with their Low-Redshift Counterparts

Authors: I. M. Hook, D. A. Howell, G. Aldering, R. Amanullah, M. S. Burns, A. Conley, S. E. Deustua, R. Ellis, S. Fabbro, V. Fadeyev, G. Folatelli, G. Garavini, R. Gibbons, G. Goldhaber, A. Goobar, D. E. Groom, A. G. Kim, R. A. Knop, M. Kowalski, C. Lidman, S. Nobili, P. E. Nugent, R. Pain, C. R. Pennypacker, S. Perlmutter , et al. (10 additional authors not shown)

Abstract: We present spectra for 14 high-redshift (0.17 < z < 0.83) supernovae, which were discovered by the Supernova Cosmology Project as part of a campaign to measure cosmological parameters. The spectra are used to determine the redshift and classify the supernova type, essential information if the supernovae are to be used for cosmological studies. Redshifts were derived either from the spectrum of t… ▽ More We present spectra for 14 high-redshift (0.17 < z < 0.83) supernovae, which were discovered by the Supernova Cosmology Project as part of a campaign to measure cosmological parameters. The spectra are used to determine the redshift and classify the supernova type, essential information if the supernovae are to be used for cosmological studies. Redshifts were derived either from the spectrum of the host galaxy or from the spectrum of the supernova itself. We present evidence that these supernovae are of Type Ia by matching to spectra of nearby supernovae. We find that the dates of the spectra relative to maximum light determined from this fitting process are consistent with the dates determined from the photometric light curves, and moreover the spectral time-sequence for SNe Type Ia at low and high redshift is indistinguishable. We also show that the expansion velocities measured from blueshifted CaHK are consistent with those measured for low-redshift Type Ia supernovae. From these first-level quantitative comparisons we find no evidence for evolution in SNIa properties between these low- and high-redshift samples. Thus even though our samples may not be complete, we conclude that there is a population of SNe Ia at high redshift whose spectral properties match those at low redshift. △ Less

Submitted 2 September, 2005; originally announced September 2005.

Comments: Accepted for publication in AJ. Also available at http://supernova.lbl.gov/

Journal ref: Astron.J.130:2788-2803,2005

Restframe I-band Hubble diagram for type Ia supernovae up to redshift z ~0.5

Authors: The Supernova Cosmology Project, :, S. Nobili, R. Amanullah, G. Garavini, A. Goobar, C. Lidman, V. Stanishev, G. Aldering, P. Antilogus, P. Astier, M. S. Burns, A. Conley, S. E. Deustua, R. Ellis, S. Fabbro, V. Fadeyev, G. Folatelli, R. Gibbons, G. Goldhaber, D. E. Groom, I. Hook, D. A. Howell, A. G. Kim, R. A. Knop , et al. (13 additional authors not shown)

Abstract: We present a novel technique for fitting restframe I-band light curves on a data set of 42 Type Ia supernovae (SNe Ia). Using the result of the fit, we construct a Hubble diagram with 26 SNe from the subset at 0.01< z<0.1. Adding two SNe at z~0.5 yields results consistent with a flat Lambda-dominated``concordance universe'' ($Ω_M,Ω_Λ$)=(0.25,0.75). For one of these, SN 2000fr, new near infrared… ▽ More We present a novel technique for fitting restframe I-band light curves on a data set of 42 Type Ia supernovae (SNe Ia). Using the result of the fit, we construct a Hubble diagram with 26 SNe from the subset at 0.01< z<0.1. Adding two SNe at z~0.5 yields results consistent with a flat Lambda-dominated``concordance universe'' ($Ω_M,Ω_Λ$)=(0.25,0.75). For one of these, SN 2000fr, new near infrared data are presented. The high redshift supernova NIR data are also used to test for systematic effects in the use of SNe Ia as distance estimators. A flat, Lambda=0, universe where the faintness of supernovae at z~0.5 is due to grey dust homogeneously distributed in the intergalactic medium is disfavoured based on the high-z Hubble diagram using this small data-set. However, the uncertainties are large and no firm conclusion may be drawn. We explore the possibility of setting limits on intergalactic dust based on B-I and B-V colour measurements, and conclude that about 20 well measured SNe are needed to give statistically significant results. We also show that the high redshift restframe I-band data points are better fit by light curve templates that show a prominent second peak, suggesting that they are not intrinsically underluminous. △ Less

Submitted 6 April, 2005; originally announced April 2005.

Comments: Accepted for publication in A&A (01/04/2005)

Spectroscopic confirmation of high-redshift supernovae with the ESO VLT

Authors: C. Lidman, D. A. Howell, G. Folatelli, G. Garavini, S. Nobili, G. Aldering, R. Amanullah, P. Antilogus, P. Astier, G. Blanc, M. S. Burns, A. Conley, S. E. Deustua, M. Doi, R. Ellis, S. Fabbro, V. Fadeyev, R. Gibbons, G. Goldhaber, A. Goobar, D. E. Groom, I. Hook, N. Kashikawa, A. G. Kim, R. A. Knop , et al. (22 additional authors not shown)

Abstract: We present VLT FORS1 and FORS2 spectra of 39 candidate high-redshift supernovae that were discovered as part of a cosmological study using Type Ia supernovae (SNe Ia) over a wide range of redshifts. From the spectra alone, 20 candidates are spectrally classified as SNe Ia with redshifts ranging from z=0.212 to z=1.181. Of the remaining 19 candidates, 1 might be a Type II supernova and 11 exhibit… ▽ More We present VLT FORS1 and FORS2 spectra of 39 candidate high-redshift supernovae that were discovered as part of a cosmological study using Type Ia supernovae (SNe Ia) over a wide range of redshifts. From the spectra alone, 20 candidates are spectrally classified as SNe Ia with redshifts ranging from z=0.212 to z=1.181. Of the remaining 19 candidates, 1 might be a Type II supernova and 11 exhibit broad supernova-like spectral features and/or have supernova-like light curves. The candidates were discovered in 8 separate ground-based searches. In those searches in which SNe Ia at z ~ 0.5 were targeted, over 80% of the observed candidates were spectrally classified as SNe Ia. In those searches in which SNe Ia with z > 1 were targeted, 4 candidates with z > 1 were spectrally classified as SNe Ia and later followed with ground and space based observatories. We present the spectra of all candidates, including those that could not be spectrally classified as supernova. △ Less

Submitted 21 October, 2004; originally announced October 2004.

Comments: 30 pages, 43 figures. Accepted by A&A. A version with higher resolution finding charts is available at http://supernova.lbl.gov/

Spectroscopic Observations and Analysis of the Peculiar SN 1999aa

Authors: G. Garavini, G. Folatelli, A. Goobar, S. Nobili, G. Aldering, A. Amadon, R. Amanullah, P. Astier, C. Balland, G. Blanc, M. S. Burns, A. Conley, T. Dahlen, S. E. Deustua, R. Ellis, S. Fabbro, X. Fan, B. Frye, E. L. Gates, R. Gibbons, G. Goldhaber, B. Goldman, D. E. Groom, J. Haissinski, D. Hardin , et al. (33 additional authors not shown)

Abstract: We present an extensive new time-series of spectroscopic data of the peculiar SN 1999aa in NGC 2595. Our data set includes 25 optical spectra between -11 and +58 days with respect to B-band maximum light, providing an unusually complete time history. The early spectra resemble those of a SN 1991T-like object but with a relatively strong Ca H&K absorption feature. The first clear sign of Si II 63… ▽ More We present an extensive new time-series of spectroscopic data of the peculiar SN 1999aa in NGC 2595. Our data set includes 25 optical spectra between -11 and +58 days with respect to B-band maximum light, providing an unusually complete time history. The early spectra resemble those of a SN 1991T-like object but with a relatively strong Ca H&K absorption feature. The first clear sign of Si II 6355, characteristic of Type Ia supernovae, is found at day -7 and its velocity remains constant up to at least the first month after B-band maximum light. The transition to normal-looking spectra is found to occur earlier than in SN 1991T suggesting SN 1999aa as a possible link between SN 1991T-like and Branch-normal supernovae. Comparing the observations with synthetic spectra, doubly ionized Fe, Si and Ni are identified at early epochs. These are characteristic of SN 1991T-like objects. Furthermore, in the day -11 spectrum, evidence is found for an absorption feature which could be identified as high velocity C II 6580 or H-alpha. At the same epoch C III 4648.8 at photospheric velocity is probably responsible for the absorption feature at 4500 A. High velocity Ca is found around maximum light together with Si II and Fe II confined in a narrow velocity window. Implied constraints on supernovae progenitor systems and explosion hydrodynamical models are briefly discussed. △ Less

Submitted 20 April, 2004; originally announced April 2004.

Comments: 46 pages including 23 figures. Accepted for publication by AJ. For full-resolution figures see http://www.physto.se/~gabri/sn99aa/

Journal ref: Astron.J.128:387-404,2004

New Constraints on $Ω_M$, $Ω_Λ$, and w from an Independent Set of Eleven High-Redshift Supernovae Observed with HST

Authors: R. A. Knop, G. Aldering, R. Amanullah, P. Astier, G. Blanc, M. S. Burns, A. Conley, S. E. Deustua, M. Doi, R. Ellis, S. Fabbro, G. Folatelli, A. S. Fruchter, G. Garavini, S. Garmond, K. Garton, R. Gibbons, G. Goldhaber, A. Goobar, D. E. Groom, D. Hardin, I. Hook, D. A. Howell, A. G. Kim, B. C. Lee , et al. (23 additional authors not shown)

Abstract: We report measurements of $Ω_M$, $Ω_Λ$, and w from eleven supernovae at z=0.36-0.86 with high-quality lightcurves measured using WFPC-2 on the HST. This is an independent set of high-redshift supernovae that confirms previous supernova evidence for an accelerating Universe. Combined with earlier Supernova Cosmology Project data, the new supernovae yield a flat-universe measurement of the mass de… ▽ More We report measurements of $Ω_M$, $Ω_Λ$, and w from eleven supernovae at z=0.36-0.86 with high-quality lightcurves measured using WFPC-2 on the HST. This is an independent set of high-redshift supernovae that confirms previous supernova evidence for an accelerating Universe. Combined with earlier Supernova Cosmology Project data, the new supernovae yield a flat-universe measurement of the mass density $Ω_M=0.25^{+0.07}_{-0.06}$ (statistical) $\pm0.04$ (identified systematics), or equivalently, a cosmological constant of $Ω_Λ=0.75^{+0.06}_{-0.07}$ (statistical) $\pm0.04$ (identified systematics). When the supernova results are combined with independent flat-universe measurements of $Ω_M$ from CMB and galaxy redshift distortion data, they provide a measurement of $w=-1.05^{+0.15}_{-0.20}$ (statistical) $\pm0.09$ (identified systematic), if w is assumed to be constant in time. The new data offer greatly improved color measurements of the high-redshift supernovae, and hence improved host-galaxy extinction estimates. These extinction measurements show no anomalous negative E(B-V) at high redshift. The precision of the measurements is such that it is possible to perform a host-galaxy extinction correction directly for individual supernovae without any assumptions or priors on the parent E(B-V) distribution. Our cosmological fits using full extinction corrections confirm that dark energy is required with $P(Ω_Λ>0)>0.99$, a result consistent with previous and current supernova analyses which rely upon the identification of a low-extinction subset or prior assumptions concerning the intrinsic extinction distribution. △ Less

Submitted 12 September, 2003; originally announced September 2003.

Comments: Accepted for publication in Astrophysical Journal; For data tables and full-resolution figures, see http://supernova.lbl.gov

Journal ref: Astrophys.J.598:102,2003

The Hubble Diagram of Type Ia Supernovae as a Function of Host Galaxy Morphology

Authors: M. Sullivan, R. S. Ellis, G. Aldering, R. Amanullah, P. Astier, G. Blanc, M. S. Burns, A. Conley, S. E. Deustua, M. Doi, S. Fabbro, G. Folatelli, A. S. Fruchter, G. Garavini, R. Gibbons, G. Goldhaber, A. Goobar, D. E. Groom, D. Hardin, I. Hook, D. A. Howell, M. Irwin, A. G. Kim, R. A. Knop, C. Lidman , et al. (19 additional authors not shown)

Abstract: (Abridged) We present new results on the Hubble diagram of distant type Ia supernovae (SNe Ia) segregated according to the type of host galaxy. This makes it possible to check earlier evidence for a cosmological constant by explicitly comparing SNe residing in galaxies likely to contain negligible dust with the larger sample. The cosmological parameters derived from these SNe Ia hosted by presum… ▽ More (Abridged) We present new results on the Hubble diagram of distant type Ia supernovae (SNe Ia) segregated according to the type of host galaxy. This makes it possible to check earlier evidence for a cosmological constant by explicitly comparing SNe residing in galaxies likely to contain negligible dust with the larger sample. The cosmological parameters derived from these SNe Ia hosted by presumed dust-free early-type galaxies supports earlier claims for a cosmological constant, which we demonstrate at 5 sigma significance, and the internal extinction implied is small even for late-type systems (A_B<0.2). Thus, our data demonstrate that host galaxy extinction is unlikely to systematically dim distant SNe Ia in a manner that would produce a spurious cosmological constant. We classify the host galaxies of 39 distant SNe discovered by the Supernova Cosmology Project (SCP) using the combination of HST STIS imaging, Keck ESI spectroscopy and ground-based broad-band photometry. We compare with a low-redshift sample of 25 SNe Ia. The scatter observed in the SNe Ia Hubble diagrams correlates closely with host galaxy morphology. We find the scatter in the SNe Ia Hubble diagram is smallest for SNe occurring in early-type hosts and largest for those occurring in late-type galaxies. Moreover, SNe residing in early-type hosts appear only ~0.14+/-0.09 mag brighter in their light-curve-width-corrected luminosity than those in late-type hosts, implying only a modest amount of dust extinction even in the late-type systems. △ Less

Submitted 20 November, 2002; originally announced November 2002.

Comments: MNRAS; post-referee version. 21 pages, 10 figures including 4 colour figures. Preprint also available at http://supernova.lbl.gov/

Journal ref: Mon.Not.Roy.Astron.Soc. 340 (2003) 1057

Microwave Background Anisotropy and Large Scale Structure in Warm Dark Matter Models

Authors: Stephen D. Burns

Abstract: Large scale structure and microwave background anisotropies are studied for warm dark matter models. Two warm dark matter candidates are considered: gravitinos and sterile neutrinos. Linear large scale structure properties such as $σ_{8}$ and the excess power are calculated, as well as microwave background anisotropies. A rather robust feature of warm dark matter models is that the large scale s… ▽ More Large scale structure and microwave background anisotropies are studied for warm dark matter models. Two warm dark matter candidates are considered: gravitinos and sterile neutrinos. Linear large scale structure properties such as $σ_{8}$ and the excess power are calculated, as well as microwave background anisotropies. A rather robust feature of warm dark matter models is that the large scale structure properties are similar to those of mixed dark matter, but that the microwave background anisotropy is very similar to that of standard cold dark matter. △ Less

Submitted 25 November, 1997; originally announced November 1997.

Comments: 22 pages, 12 figures, 4 tables

Report number: UCLA/97/TEP/28

Isentropic and Isocurvature Axion Perturbations in Inflationary Cosmology

Authors: Stephen D. Burns

Abstract: Isentropic and isocurvature axion inflationary perturbations are studied in detail. If isocurvature perturbations are present, COBE requires the inflationary Hubble constant to be rather small, $H_{I} \stackrel{<}{\sim} 10^{12}$GeV, regardless of the inflation model. Microwave background anisotropies are calculated for CDM models with a mixture of axion and supersymmetric CDM. The angular power… ▽ More Isentropic and isocurvature axion inflationary perturbations are studied in detail. If isocurvature perturbations are present, COBE requires the inflationary Hubble constant to be rather small, $H_{I} \stackrel{<}{\sim} 10^{12}$GeV, regardless of the inflation model. Microwave background anisotropies are calculated for CDM models with a mixture of axion and supersymmetric CDM. The angular power spectrum of the microwave background depends not only on the amplitude of the isocurvature power spectrum but also on $Ω_{a}$. The Saskatoon data and $σ_{8}$ are used to constrain the contribution of axion isocurvature perturbations. Consistency with the Saskatoon data requires the square of the amplitude of the isocurvature perturbations to be $\stackrel{<}{\sim} 0.1$ times that of the adiabatic perturbations at $\ell=87$, and $\stackrel{<}{\sim} 10^{-3}-10^{-2}$ that of the adiabatic perturbations at $\ell=237$. Although not dominant, isocurvature perturbations are not yet ruled out. The consequences of isocurvature perturbations for axions and inflation are discussed. △ Less

Submitted 25 November, 1997; originally announced November 1997.

Comments: 48 pages, 22 figures, 2 tables

Report number: UCLA/97/TEP/27