-
A Deep uGMRT view of the ultra steep spectrum radio halo in Abell 521
Authors:
Ramananda Santra,
Ruta Kale,
Simona Giacintucci,
Maxim Markevitch,
Federico De. Luca,
Herve Bourdin,
Tiziana Venturi,
Daniele Dallacasa,
Rossella Cassano,
Gianfranco Brunetti,
Kaushal Buch
Abstract:
We present the first detailed analysis of the ultra-steep spectrum radio halo in the merging galaxy cluster Abell 521, based on upgraded Giant Metrewave Radio telescope (uGMRT) observations. The combination of radio observations (300-850 MHz) and archival X-ray data provide a new window into the complex physics occurring in this system. When compared to all previous analyses, our sensitive radio i…
▽ More
We present the first detailed analysis of the ultra-steep spectrum radio halo in the merging galaxy cluster Abell 521, based on upgraded Giant Metrewave Radio telescope (uGMRT) observations. The combination of radio observations (300-850 MHz) and archival X-ray data provide a new window into the complex physics occurring in this system. When compared to all previous analyses, our sensitive radio images detected the centrally located radio halo emission to a greater extent of $\sim$ 1.3 Mpc. A faint extension of the southeastern radio relic has been discovered. We detected another relic, recently discovered by MeerKAT, and coincident with a possible shock front in the X-rays, at the northwest position of the center. We find that the integrated spectrum of the radio halo is well-fitted with a spectral index of $-1.86 \pm 0.12$. A spatially resolved spectral index map revealed the spectral index fluctuations, as well as an outward radial steepening of the average spectral index. The radio and X-ray surface brightness are well correlated for the entire and different sub-parts of the halo, with sub-linear correlation slopes (0.50$-$0.65). We also found a mild anti-correlation between the spectral index and X-ray surface brightness. Newly detected extensions of the SE relic and the counter relic are consistent with the merger in the plane of the sky.
△ Less
Submitted 16 November, 2023;
originally announced November 2023.
-
Real-time RFI Filtering for uGMRT: Overview of the Released System and Relevance to the SKA
Authors:
Kaushal D. Buch,
Ruta Kale,
Mekhala Muley,
Sanjay Kudale,
Ajithkumar B.
Abstract:
Radio Frequency Interference (RFI) of impulsive nature is created by sources like sparking on high-power transmission lines due to gap or corona discharge and automobile sparking, and it affects the entire observing frequency bands of low-frequency radio telescopes. Such RFI is a significant problem at the Upgraded Giant Metrewave Radio Telescope (uGMRT). A real-time RFI filtering scheme has been…
▽ More
Radio Frequency Interference (RFI) of impulsive nature is created by sources like sparking on high-power transmission lines due to gap or corona discharge and automobile sparking, and it affects the entire observing frequency bands of low-frequency radio telescopes. Such RFI is a significant problem at the Upgraded Giant Metrewave Radio Telescope (uGMRT). A real-time RFI filtering scheme has been developed and implemented to mitigate the effect on astronomical observations. The scheme works in real-time on pre-correlation data from each antenna and allows the detection of RFI based on median absolute deviation statistics. The samples are identified as RFI based on user-defined thresholds and are replaced by digital noise, a constant or zeros. We review the testing and implementation of this system at the uGMRT. We illustrate the effectiveness of the filtering for continuum, spectral line and time-domain data. The real-time filter is released for regular observations in the bands falling in 250 - 1450 MHz, and recent observing cycles show growing usage. Further, we explain the relevance of the released system to the Square Kilometer Array (SKA) receiver chain and possible ways of implementation to meet the computational requirements.
△ Less
Submitted 18 January, 2023;
originally announced January 2023.
-
Progression of Digital-Receiver Architecture: From MWA to SKA1-Low,and beyond
Authors:
Girish B. S.,
Harshavardhan Reddy S.,
Shiv Sethi,
Srivani K. S.,
Abhishek R.,
Ajithkumar B.,
Sahana Bhattramakki,
Kaushal Buch,
Sandeep Chaudhuri,
Yashwant Gupta,
Kamini P. A.,
Sanjay Kudale,
Madhavi S.,
Mekhala Muley,
Prabu T.,
Raghunathan A.,
Shelton G. J
Abstract:
Backed by advances in digital electronics, signal processing, computation, and storage technologies, aperture arrays, which had strongly influenced the design of telescopes in the early years of radio astronomy, have made a comeback. Amid all these developments, an international effort to design and build the world's largest radio telescope, the Square Kilometre Array (SKA), is ongoing. With its v…
▽ More
Backed by advances in digital electronics, signal processing, computation, and storage technologies, aperture arrays, which had strongly influenced the design of telescopes in the early years of radio astronomy, have made a comeback. Amid all these developments, an international effort to design and build the world's largest radio telescope, the Square Kilometre Array (SKA), is ongoing. With its vast collecting area of 1 sq-km, the SKA is envisaged to provide unsurpassed sensitivity and leverage technological advances to implement a complex receiver to provide a large field of view through multiple beams on the sky. Many pathfinders and precursor aperture array telescopes for the SKA, operating in the frequency range of 10-300 MHz, have been constructed and operationalized to obtain valuable feedback on scientific, instrumental, and functional aspects. This review article looks explicitly into the progression of digital-receiver architecture from the Murchison Widefield Array (precursor) to the SKA1-Low. It highlights the technological advances in analog-to-digital converters (ADCs),field-programmable gate arrays (FPGAs), and central processing unit-graphics processing unit (CPU-GPU) hybrid platforms around which complex digital signal processing systems implement efficient channelizers, beamformers, and correlators. The article concludes with a preview of the design of a new generation signal processing platform based on radio frequency system-on-chip (RFSoC).
△ Less
Submitted 17 January, 2023;
originally announced January 2023.
-
Performance Analysis Techniques for Real-time Broadband RFI Filtering System of uGMRT
Authors:
Kaushal D. Buch,
Ruta Kale,
Kishor D. Naik,
Rahul Aragade,
Mekhala Muley,
Sanjay Kudale,
Ajith Kumar B
Abstract:
Electromagnetic radiation from human activities, known as man-made Radio Frequency Interference (RFI), adversely affects radio astronomy observations. In the vicinity of the Upgraded Giant Metrewave Radio Telescope (uGMRT) array, the sparking on power lines is the major cause of interference at observing frequencies less than 800 MHz. A real-time broadband RFI detection and filtering system is imp…
▽ More
Electromagnetic radiation from human activities, known as man-made Radio Frequency Interference (RFI), adversely affects radio astronomy observations. In the vicinity of the Upgraded Giant Metrewave Radio Telescope (uGMRT) array, the sparking on power lines is the major cause of interference at observing frequencies less than 800 MHz. A real-time broadband RFI detection and filtering system is implemented as part of the uGMRT wideband signal processing backend to mitigate the effect of broadband RFI. Performance analysis techniques used for testing and commissioning the system for observations in the beamformer and correlator modes of the uGMRT are presented. The concept and implementation of recording simultaneous unfiltered and filtered data along with data analysis and interpretation is illustrated using an example. For the beamformer mode, spectrogram, single spectral channel, and its Fourier transform is used for performance analysis whereas, in the correlator mode, the cross-correlation function, closure phase, and visibilities from the simultaneously recorded unfiltered and filtered is carried out. These techniques are used for testing the performance of the broadband RFI filter and releasing it for uGMRT users.
△ Less
Submitted 20 September, 2022;
originally announced September 2022.
-
The Expanded Giant Metrewave Radio Telescope
Authors:
N. N. Patra,
N. Kanekar,
J. N. Chengalur,
R. Sharma,
M. de Villiers,
B. Ajit Kumar,
B. Bhattacharyya,
V. Bhalerao,
R. Bombale,
K. D. Buch,
B. Dixit,
A. Ghalame,
Y. Gupta,
P. Hande,
S. Hande,
K. Hariharan,
R. Kale,
S. Lokhande,
S. Phakatkar,
A. Prajapati,
S. K. Rai,
P. Raybole,
J. Roy,
A. K. Shaikh,
S. Sureshkumar
Abstract:
With 30 antennas and a maximum baseline length of 25 km, the Giant Metrewave Radio Telescope (GMRT) is the premier low-frequency radio interferometer today. We have carried out a study of possible expansions of the GMRT, via adding new antennas and installing focal plane arrays (FPAs), to improve its point-source sensitivity, surface brightness sensitivity, angular resolution, field of view, and U…
▽ More
With 30 antennas and a maximum baseline length of 25 km, the Giant Metrewave Radio Telescope (GMRT) is the premier low-frequency radio interferometer today. We have carried out a study of possible expansions of the GMRT, via adding new antennas and installing focal plane arrays (FPAs), to improve its point-source sensitivity, surface brightness sensitivity, angular resolution, field of view, and U-V coverage. We have carried out array configuration studies, aimed at minimizing the number of new GMRT antennas required to obtain a well-behaved synthesized beam over a wide range of angular resolutions for full-synthesis observations. This was done via two approaches, tomographic projection and random sampling, to identify the optimal locations for the new antennas. We report results for the optimal locations of the antennas of an expanded array (the "EGMRT"), consisting of the existing 30 GMRT antennas, 30 new antennas at short distances, $\leq 2.5$ km from the array centre, and 26 new antennas at long distances, $\approx 5-25$ km from the array centre. The collecting area and the field of view of the proposed EGMRT array would be larger by factors of, respectively, $\approx 3$ and $\approx 30$, than those of the GMRT. Indeed, the EGMRT continuum sensitivity and survey speed with 550-850 MHz FPAs installed on the 45 antennas within a distance of $\approx 2.5$ km of the array centre would be far better than those of any existing interferometer, and comparable to the sensitivity and survey speed of Phase-1 of the Square Kilometre Array.
△ Less
Submitted 3 January, 2019;
originally announced January 2019.
-
Implementing and Characterizing Real-time Broadband RFI Excision for the GMRT Wideband Backend
Authors:
Kaushal D. Buch,
Kishor Naik,
Swapnil Nalawade,
Shruti Bhatporia,
Yashwant Gupta,
B Ajithkumar
Abstract:
The Giant Metrewave Radio Telescope (GMRT) is being upgraded to increase the receiver sensitivity. This makes the receiver more susceptible to man-made Radio Frequency Interference (RFI). To improve the receiver performance in presence of RFI, real-time RFI excision (filtering) is incorporated in the GMRT wideband backend (GWB). The RFI filtering system is implemented on FPGA and CPU-GPU platforms…
▽ More
The Giant Metrewave Radio Telescope (GMRT) is being upgraded to increase the receiver sensitivity. This makes the receiver more susceptible to man-made Radio Frequency Interference (RFI). To improve the receiver performance in presence of RFI, real-time RFI excision (filtering) is incorporated in the GMRT wideband backend (GWB). The RFI filtering system is implemented on FPGA and CPU-GPU platforms to detect and remove broadband and narrowband RFI. The RFI is detected using a threshold-based technique where the threshold is computed using Median Absolute Deviation (MAD) estimator. The filtering is carried out by replacing the RFI samples by either noise samples or constant value or threshold. This paper describes the status of the real-time broadband RFI excision system in the wideband receiver chain of the upgraded GMRT (uGMRT). The test methodology for carrying out various tests to demonstrate the performance of broadband RFI excision at the system level and on radio astronomical imaging experiments are also described.
△ Less
Submitted 23 October, 2017;
originally announced October 2017.
-
A Decade of Develo** Radio-Astronomy Instrumentation using CASPER Open-Source Technology
Authors:
Jack Hickish,
Zuhra Abdurashidova,
Zaki Ali,
Kaushal D. Buch,
Sandeep C. Chaudhari,
Hong Chen,
Matthew Dexter,
Rachel Simone Domagalski,
John Ford,
Griffin Foster,
David George,
Joe Greenberg,
Lincoln Greenhill,
Adam Isaacson,
Homin Jiang,
Glenn Jones,
Francois Kapp,
Henno Kriel,
Rich Lacasse,
Andrew Lutomirski,
David MacMahon,
Jason Manley,
Andrew Martens,
Randy McCullough,
Mekhala V. Muley
, et al. (11 additional authors not shown)
Abstract:
The Collaboration for Astronomy Signal Processing and Electronics Research (CASPER) has been working for a decade to reduce the time and cost of designing, building and deploying new digital radio-astronomy instruments. Today, CASPER open-source technology powers over 45 scientific instruments worldwide, and is used by scientists and engineers at dozens of academic institutions. In this paper we c…
▽ More
The Collaboration for Astronomy Signal Processing and Electronics Research (CASPER) has been working for a decade to reduce the time and cost of designing, building and deploying new digital radio-astronomy instruments. Today, CASPER open-source technology powers over 45 scientific instruments worldwide, and is used by scientists and engineers at dozens of academic institutions. In this paper we catalog the current offerings of the CASPER collaboration, and instruments past and present built by CASPER users and developers. We describe the ongoing state of software development, as CASPER looks to support a broader range of programming environments and hardware and ensure compatibility with the latest vendor tools.
△ Less
Submitted 6 November, 2016;
originally announced November 2016.