-
Characterization of a SiPM-based monolithic neutron scatter camera using dark counts
Authors:
J. Balajthy,
J. Brown,
E. Brubaker,
B. Cabrera-Palmer,
J. Cates,
B. L. Goldblum,
M. Folsom,
P. Hausladen,
K. Keefe,
J. Nattress,
V. Negut,
K. Nishimura,
J. Steele,
K. Ziock
Abstract:
We report on the design and characterization of a prototype monolithic neutron scatter camera that is intended to significantly improve upon the geometrical shortcomings of conventional neutron cameras. The detector consists of a 50 mm $\times$ 56 mm $\times$ 60 mm monolithic block of EJ-204 plastic scintillator instrumented on two faces with arrays of 64 Hamamatsu S13360-6075PE silicon photomulti…
▽ More
We report on the design and characterization of a prototype monolithic neutron scatter camera that is intended to significantly improve upon the geometrical shortcomings of conventional neutron cameras. The detector consists of a 50 mm $\times$ 56 mm $\times$ 60 mm monolithic block of EJ-204 plastic scintillator instrumented on two faces with arrays of 64 Hamamatsu S13360-6075PE silicon photomultipliers (SiPMs). The electronic crosstalk is limited to < 5% between adjacent channels and < 0.1% between all other channel pairs. SiPMs introduce a significantly elevated dark count rate over PMTs, as well as correlated noise from after-pulsing and optical crosstalk. In this article, we characterize the dark count rate and optical crosstalk and present a modified event reconstruction likelihood function that accounts for them. We find that the average dark count rate per SiPM is 4.3 MHz with a standard deviation of 1.5 MHz among devices. The analysis method we employ to measure internal optical crosstalk also naturally yields the mean and width of the single-electron pulse height. We calculate separate contributions to the width of the single-electron pulse-height from electronic noise and avalanche fluctuations. We demonstrate a timing resolution for a single-photon pulse to be 128 ($\pm$4) ps. Finally, coincidence analysis is employed to measure external (pixel-to-pixel) optical crosstalk. We present a map of the average external crosstalk probability between 2-by-4 groups of SiPMs, as well as the in-situ timing characteristics extracted from the coincidence analysis. Further work is needed to characterize the performance of the camera at reconstructing single- and double-site interactions, as well as image reconstruction.
△ Less
Submitted 29 February, 2024; v1 submitted 26 September, 2023;
originally announced September 2023.
-
Design and Characterization of an Optically-Segmented Single Volume Scatter Camera Module
Authors:
Kevin Keefe,
Hassam Alhajaji,
Erik Brubaker,
Andrew Druetzler,
Aline Galindo-Tellez,
John Learned,
Paul Maggi,
Juan J. Manfredi,
Kurtis Nishimura,
Bejamin Pinto Souza,
John Steele,
Melinda Sweany,
Eric Takahashi
Abstract:
The Optically Segmented Single Volume Scatter Camera (OS-SVSC) aims to image neutron sources for nuclear non-proliferation applications using the kinematic reconstruction of elastic double-scatter events. We report on the design, construction, and calibration of one module of a new prototype. The module includes 16 EJ-204 organic plastic scintillating bars individually wrapped in Teflon tape, each…
▽ More
The Optically Segmented Single Volume Scatter Camera (OS-SVSC) aims to image neutron sources for nuclear non-proliferation applications using the kinematic reconstruction of elastic double-scatter events. We report on the design, construction, and calibration of one module of a new prototype. The module includes 16 EJ-204 organic plastic scintillating bars individually wrapped in Teflon tape, each measuring 0.5 cm$\times$0.5 cm$\times$20 cm. The scintillator array is coupled to two custom Silicon Photomultiplier (SiPM) boards consisting of a 2$\times$8 array of SensL J-Series-60035 Silicon Photomultipliers, which are read out by a custom 16 channel DRS-4 based digitizer board. The electrical crosstalk between SiPMs within the electronics chain is measured as 0.76% $\pm$ 0.11% among all 16 channels. We report the detector response of one module including interaction position, time, and energy, using two different optical coupling materials: EJ-560 silicone rubber optical coupling pads and EJ-550 optical coupling grease. We present results in terms of the overall mean and standard deviation of the z-position reconstruction and interaction time resolutions for all 16 bars in the module. We observed the z-position resolution for gamma interactions in the 0.3 MeVee to 0.4 MeVee range to be 2.24 cm$\pm$1.10 cm and 1.45 cm$\pm$0.19 cm for silicone optical coupling pad and optical grease, respectively. The observed interaction time resolution is 265 ps$\pm$29 ps and 235 ps$\pm$10 ps for silicone optical coupling pad and optical grease, respectively.
△ Less
Submitted 20 December, 2021;
originally announced December 2021.
-
Simultaneous measurement of organic scintillator response to carbon and proton recoils
Authors:
T. A. Laplace,
B. L. Goldblum,
J. J. Manfredi,
J. A. Brown,
D. L. Bleuel,
C. A. Brand,
G. Gabella,
J. Gordon,
E. Brubaker
Abstract:
Background: Organic scintillators are widely used for neutron detection in both basic nuclear physics and applications. While the proton light yield of organic scintillators has been extensively studied, measurements of the light yield from neutron interactions with carbon nuclei are scarce. Purpose: Demonstrate a new approach for the simultaneous measurement of the proton and carbon light yield o…
▽ More
Background: Organic scintillators are widely used for neutron detection in both basic nuclear physics and applications. While the proton light yield of organic scintillators has been extensively studied, measurements of the light yield from neutron interactions with carbon nuclei are scarce. Purpose: Demonstrate a new approach for the simultaneous measurement of the proton and carbon light yield of organic scintillators. Provide new carbon light yield data for the EJ-309 liquid and EJ-204 plastic organic scintillators. Method: A 33~MeV $^{2}$H$^{+}$ beam from the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory was im**ed upon a 3-mm-thick Be target to produce a high-flux, broad-spectrum neutron beam. The double time-of-flight technique was extended to simultaneously measure the proton and carbon light yield of the organic scintillators, wherein the light output associated with the recoil particle was determined using $np$ and $n$C elastic scattering kinematics. Results: The proton and carbon light yield relations of the EJ-309 liquid and EJ-204 plastic organic scintillators were measured over a recoil energy range of approximately 0.3 to 1~MeV and 2 to 5~MeV, respectively for EJ-309, and 0.2 to 0.5~MeV and 1 to 4~MeV, respectively for EJ-204. Conclusions: These data provide new insight into the ionization quenching effect in organic scintillators and key input for simulation of the response of organic scintillators for both basic science and a broad range of applications.
△ Less
Submitted 12 July, 2021;
originally announced July 2021.
-
Proton light yield of fast plastic scintillators for neutron imaging
Authors:
J. J. Manfredi,
B. L. Goldblum,
T. A. Laplace,
G. Gabella,
J. Gordon,
A. O'Brien,
S. Chowdhury,
J. A. Brown,
E. Brubaker
Abstract:
Plastic organic scintillators have been tailored in composition to achieve ultra-fast temporal response, thereby enabling the design and development of fast neutron detection systems with high timing resolution. Eljen Technology's plastic organic scintillators -- EJ-230, EJ-232, and EJ-232Q -- are prospective candidates for use in emerging neutron imaging systems, where fast timing is paramount. T…
▽ More
Plastic organic scintillators have been tailored in composition to achieve ultra-fast temporal response, thereby enabling the design and development of fast neutron detection systems with high timing resolution. Eljen Technology's plastic organic scintillators -- EJ-230, EJ-232, and EJ-232Q -- are prospective candidates for use in emerging neutron imaging systems, where fast timing is paramount. To support the neutron response characterization of these materials, the relative proton light yields of EJ-230, EJ-232, and EJ-232Q were measured at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory. Using a broad-spectrum neutron source and a double time-of-flight technique, the proton light yield relations were obtained over a proton recoil energy range of approximately 300 keV to 4 MeV. The EJ-230, EJ-232, and EJ-232Q scintillators exhibited similar proton light yield relations to each other as well as to other plastic scintillators with the same polymer base material. A comparison of the relative proton light yield of different sized cylindrical EJ-232 and EJ-232Q scintillators also revealed consistent results. This work provides key input data for the realistic computational modeling of neutron detection technologies employing these materials, thereby supporting new capabilities in near-field radionuclide detection for national security applications.
△ Less
Submitted 12 July, 2021;
originally announced July 2021.
-
Design and Calibration of an Optically Segmented Single Volume Scatter Camera for Neutron Imaging
Authors:
A. Galindo-Tellez,
K. Keefe,
E. Adamek,
E. Brubaker,
B. Crow,
R. Dorrill,
A. Druetzler,
C. J. Felix,
N. Kaneshige,
J. G. Learned,
J. J. Manfredi,
K. Nishimura,
B. Pinto Souza,
D. Schoen,
M. Sweany
Abstract:
The Optically Segmented Single Volume Scatter Camera (OS-SVSC) aims to image neutron sources for non-proliferation applications using the kinematic reconstruction of elastic double-scatter events. Our prototype system consists of 64 EJ-204 organic plastic scintillator bars, each measuring 5 mm $\times$ 5 mm $\times$ 200 mm and individually wrapped in Teflon tape. The scintillator array is opticall…
▽ More
The Optically Segmented Single Volume Scatter Camera (OS-SVSC) aims to image neutron sources for non-proliferation applications using the kinematic reconstruction of elastic double-scatter events. Our prototype system consists of 64 EJ-204 organic plastic scintillator bars, each measuring 5 mm $\times$ 5 mm $\times$ 200 mm and individually wrapped in Teflon tape. The scintillator array is optically coupled to two silicon photomultiplier ArrayJ-60035 64P-PCB arrays, each comprised of 64 individual 6 $\times$ 6 mm J-Series sensors arranged in an 8 $\times$ 8 array. We detail our calibration efforts, beginning with calibrations for the electronics, based on the IRS3D application-specific integrated circuits, and their associated timing resolutions, ranging from 30 ps to 90 ps. With electronics calibrations applied, energy and position calibrations were performed for a set of edge bars using $^{22}$Na and $^{90}$Sr, respectively, reporting an average resolution of (12.07$\pm$0.03) mm for energy depositions between 900 keVee and 1000 keVee. We further demonstrate a position calibration method for the internal bars of the matrix using cosmic-ray muons as an alternative to emission sources that cannot easily access these bars, with an average measured resolution of (14.86$\pm$0.29) mm for depositions between 900 keVee and 1000 keVee. The coincident time resolution reported between pairs of bars measured up to 400 ps from muon acquisitions. Energy and position calibration values measured with muons are consistent with those obtained using particle emission sources.
△ Less
Submitted 17 February, 2021; v1 submitted 4 February, 2021;
originally announced February 2021.
-
Proton Light Yield in Organic Scintillators using a Double Time-of-Flight Technique
Authors:
J. A. Brown,
B. L. Goldblum,
T. A. Laplace,
K. P. Harrig,
L. A. Bernstein,
D. L. Bleuel,
W. Younes,
D. Reyna,
E. Brubaker,
P. Marleau
Abstract:
Recent progress in the development of novel organic scintillators necessitates modern characterization capabilities. As the primary means of energy deposition by neutrons in these materials is n-p elastic scattering, knowledge of the proton light yield is paramount. This work establishes a new model-independent method to continuously measure proton light yield in organic scintillators over a broad…
▽ More
Recent progress in the development of novel organic scintillators necessitates modern characterization capabilities. As the primary means of energy deposition by neutrons in these materials is n-p elastic scattering, knowledge of the proton light yield is paramount. This work establishes a new model-independent method to continuously measure proton light yield in organic scintillators over a broad energy range. Using a deuteron breakup neutron source at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory and an array of organic scintillators, the proton light yield of EJ-301 and EJ-309, commercially available organic liquid scintillators from Eljen Technology, were measured via a double time-of-flight technique. The light yield was determined using a kinematically over-constrained system in the proton energy range of 1-20 MeV. The effect of pulse integration length on the magnitude and shape of the proton light yield relation was also explored. This work enables accurate simulation of the performance of advanced neutron detectors and supports the development of next-generation neutron imaging systems.
△ Less
Submitted 4 October, 2020;
originally announced October 2020.
-
Low Energy Light Yield of Fast Plastic Scintillators
Authors:
T. A. Laplace,
B. L. Goldblum,
J. A. Brown,
D. L. Bleuel,
C. A. Brand,
G. Gabella,
T. Jordan,
C. Moore,
N. Munshi,
Z. W. Sweger,
A. Ureche,
E. Brubaker
Abstract:
Compact neutron imagers using double-scatter kinematic reconstruction are being designed for localization and characterization of special nuclear material. These neutron imaging systems rely on scintillators with a rapid prompt temporal response as the detection medium. As n-p elastic scattering is the primary mechanism for light generation by fast neutron interactions in organic scintillators, pr…
▽ More
Compact neutron imagers using double-scatter kinematic reconstruction are being designed for localization and characterization of special nuclear material. These neutron imaging systems rely on scintillators with a rapid prompt temporal response as the detection medium. As n-p elastic scattering is the primary mechanism for light generation by fast neutron interactions in organic scintillators, proton light yield data are needed for accurate assessment of scintillator performance. The proton light yield of a series of commercial fast plastic organic scintillators---EJ-200, EJ-204, and EJ-208---was measured via a double time-of-flight technique at the 88-Inch Cyclotron at Lawrence Berkeley National Laboratory. Using a tunable deuteron breakup neutron source, target scintillators housed in a dual photomultiplier tube configuration, and an array of pulse-shape-discriminating observation scintillators, the fast plastic scintillator light yield was measured over a broad and continuous energy range down to proton recoil energies of approximately 50 keV. This work provides key input to event reconstruction algorithms required for utilization of these materials in emerging neutron imaging modalities.
△ Less
Submitted 15 September, 2020;
originally announced September 2020.
-
Pressure-induced suppression of ferromagnetism in the itinerant ferromagnet LaCrSb$_3$
Authors:
Z. E. Brubaker,
J. S. Harvey,
J. R. Badger,
R. R. Ullah,
D. J. Campbell,
Y. Xiao,
P. Chow,
C. Kenney-Benson,
J. S. Smith,
C. Reynolds,
J. Paglione,
R. J. Zieve,
J. R. Jeffries,
V. Taufour
Abstract:
We have performed an extensive pressure-dependent structural, spectroscopic, and electrical transport study of LaCrSb$_3$. The ferromagnetic phase (T$_C$ = 120 K at p = 0 GPa) is fully suppressed by p = 26.5 GPa and the Cr-moment decreases steadily with increasing pressure. The unit cell volume decreases smoothly up to p = 55 GPa. We find that the bulk modulus and suppression of the magnetism are…
▽ More
We have performed an extensive pressure-dependent structural, spectroscopic, and electrical transport study of LaCrSb$_3$. The ferromagnetic phase (T$_C$ = 120 K at p = 0 GPa) is fully suppressed by p = 26.5 GPa and the Cr-moment decreases steadily with increasing pressure. The unit cell volume decreases smoothly up to p = 55 GPa. We find that the bulk modulus and suppression of the magnetism are in good agreement with theoretical predictions, but the Cr-moment decreases smoothly with pressure, in contrast to steplike drops predicted by theory. The ferromagnetic ordering temperature appears to be driven by the Cr-moment.
△ Less
Submitted 22 May, 2020;
originally announced May 2020.
-
Valence instability across magnetostructural transition in USb$_2$
Authors:
Z. E. Brubaker,
Y. Xiao,
P. Chow,
C. Kenney-Benson,
J. S. Smith,
H. Cynn,
C. Reynolds,
N. P. Butch,
R. J. Zieve,
J. R. Jeffries
Abstract:
We have performed pressure dependent X-ray diffraction and resonant X-ray emission spectroscopy experiments on USb$_2$ to further characterize the AFM-FM transition occurring near 8 GPa. We have found the magnetic transition coincides with a tetragonal to orthorhombic transition resulting in a 17% volume collapse as well as a transient $\textit{f}$-occupation enhancement. Compared to UAs$_2$ and U…
▽ More
We have performed pressure dependent X-ray diffraction and resonant X-ray emission spectroscopy experiments on USb$_2$ to further characterize the AFM-FM transition occurring near 8 GPa. We have found the magnetic transition coincides with a tetragonal to orthorhombic transition resulting in a 17% volume collapse as well as a transient $\textit{f}$-occupation enhancement. Compared to UAs$_2$ and UAsS, USb$_2$ shows a reduced bulk modulus and transition pressure and an increased volume collapse at the structural transition. Except for an enhancement across the transition region, the $\textit{f}$-occupancy decreases steadily from 1.96 to 1.75.
△ Less
Submitted 31 January, 2020;
originally announced February 2020.
-
Interfacial-Redox-Induced Tuning of Superconductivity in YBa$_{2}$Cu$_{3}$O$_{7-δ}$
Authors:
Peyton D. Murray,
Dustin A. Gilbert,
Alexander J. Grutter,
Brian J. Kirby,
David Hernandez-Maldonado,
Maria Varela,
Zachary E. Brubaker,
W. L. N. C. Liyanage,
Rajesh V. Chopdekar,
Valentin Taufour,
Rena J. Zieve,
Jason R. Jeffries,
Elke Arenholz,
Yayoi Takamura,
Julie A. Borchers,
Kai Liu
Abstract:
Solid state ionic approaches for modifying ion distributions in getter/oxide heterostructures offer exciting potentials to control material properties. Here we report a simple, scalable approach allowing for total control of the superconducting transition in optimally doped YBa$_{2}$Cu$_{3}$O$_{7-δ}$ (YBCO) films via a chemically-driven ionic migration mechanism. Using a thin Gd cap** layer of u…
▽ More
Solid state ionic approaches for modifying ion distributions in getter/oxide heterostructures offer exciting potentials to control material properties. Here we report a simple, scalable approach allowing for total control of the superconducting transition in optimally doped YBa$_{2}$Cu$_{3}$O$_{7-δ}$ (YBCO) films via a chemically-driven ionic migration mechanism. Using a thin Gd cap** layer of up to 20 nm deposited onto 100 nm thick epitaxial YBCO films, oxygen is found to leach from deep within the YBCO. Progressive reduction of the superconducting transition is observed, with complete suppression possible for a sufficiently thick Gd layer. These effects arise from the combined impact of redox-driven electron do** and modification of the YBCO microstructure due to oxygen migration and depletion. This work demonstrates an effective ionic control of superconductivity in oxides, an interface induced effect that goes well into the quasi-bulk regime, opening up possibilities for electric field manipulation.
△ Less
Submitted 17 November, 2019;
originally announced November 2019.
-
Phonon Dispersion of Mo-stabilized $γ$-U measured using Inelastic X-ray Scattering
Authors:
Z. E. Brubaker,
S. Ran,
A. H. Said,
M. E. Manley,
P. Söderlind,
D. Rosas,
Y. Idell,
R. J. Zieve,
N. P. Butch,
J. R. Jeffries
Abstract:
We have measured the room-temperature phonon spectrum of Mo-stabilized $γ-$U. The dispersion curves show unusual softening near the H point, q=[1/2,1/2,1/2], which may derive from the metastability of the $γ-$U phase or from strong electron-phonon coupling. Near the zone center, the dispersion curves agree well with theory, though significant differences are observed away from the zone center. The…
▽ More
We have measured the room-temperature phonon spectrum of Mo-stabilized $γ-$U. The dispersion curves show unusual softening near the H point, q=[1/2,1/2,1/2], which may derive from the metastability of the $γ-$U phase or from strong electron-phonon coupling. Near the zone center, the dispersion curves agree well with theory, though significant differences are observed away from the zone center. The experimental phonon density of states is shifted to higher energy compared to theory and high-temperature neutron scattering. The elastic constants of $γ$-UMo are similar to those of body-centered cubic elemental metals.
△ Less
Submitted 5 September, 2019;
originally announced September 2019.
-
Pressure-Driven Valence Increase and Metallization in Kondo Insulator Ce$_3$Bi$_4$Pt$_3$
Authors:
Daniel J. Campbell,
Zachary E. Brubaker,
Connor Roncaioli,
Prathum Saraf,
Yuming Xiao,
Paul Chow,
Curtis Kenney-Benson,
Dmitry Popov,
Rena J. Zieve,
Jason R. Jeffries,
Johnpierre Paglione
Abstract:
We report the results of high pressure x-ray diffraction, x-ray absorption, and electrical transport measurements of Kondo insulator Ce$_3$Bi$_4$Pt$_3$ up to 42 GPa, the highest pressure reached in the study of any Ce-based KI. We observe a smooth decrease in volume and movement toward intermediate Ce valence with pressure, both of which point to increased electron correlations. Despite this, temp…
▽ More
We report the results of high pressure x-ray diffraction, x-ray absorption, and electrical transport measurements of Kondo insulator Ce$_3$Bi$_4$Pt$_3$ up to 42 GPa, the highest pressure reached in the study of any Ce-based KI. We observe a smooth decrease in volume and movement toward intermediate Ce valence with pressure, both of which point to increased electron correlations. Despite this, temperature-dependent resistance data show the suppression of the interaction-driven ambient pressure insulating ground state. We also discuss potential ramifications of these results for the predicted topological KI state.
△ Less
Submitted 8 October, 2019; v1 submitted 21 July, 2019;
originally announced July 2019.
-
Interaction position, time, and energy resolution in organic scintillator bars with dual-ended readout
Authors:
Melinda Sweany,
Aline Galindo-Tellez,
Joshua Brown,
Erik Brubaker,
Ryan Dorrill,
Andrew Druetzler,
Nathaniel Kaneshige,
John Learned,
Kurtis Nishimura,
Wonseok Bae
Abstract:
We report on the position, timing, and energy resolution of a range of plastic scintillator bars and reflector treatments using dual-ended silicon photomultiplier readout. These measurements are motivated by the upcoming construction of an optically segmented single-volume neutron scatter camera, in which neutron elastic scattering off of hydrogen is used to kinematically reconstruct the source di…
▽ More
We report on the position, timing, and energy resolution of a range of plastic scintillator bars and reflector treatments using dual-ended silicon photomultiplier readout. These measurements are motivated by the upcoming construction of an optically segmented single-volume neutron scatter camera, in which neutron elastic scattering off of hydrogen is used to kinematically reconstruct the source direction and energy of an incoming neutron. For this application, interaction position resolutions of about 10 mm and timing resolutions of about 1 ns are necessary to achieve the desired efficiency for fission-energy neutrons. The results presented here indicate that this is achievable with an array of $5\times5\times190~\mathrm{mm}^3$ bars of EJ-204 scintillator wrapped in Teflon tape, read out with SensL's J-series $6\times6~\mathrm{mm}^2$ silicon photomultipliers. With two independent setups, we also explore the systematic variability of the position resolution, and show that, in general, using the difference in the pulse arrival time at the two ends is less susceptible to systematic variation than using the log ratio of the charge amplitude of the two ends. Finally, we measure a bias in the absolute time of interactions as a function of position along the bar: the measured interaction time for events at the center of the bar is $\sim$100 ps later than interactions near the SiPM.
△ Less
Submitted 20 February, 2019;
originally announced February 2019.
-
Pressure dependent intermediate valence behavior in YbNiGa$_{4}$ and YbNiIn$_{4}$
Authors:
Z. E. Brubaker,
R. L. Stillwell,
P. Chow,
Y. Xiao,
C. Kenney-Benson,
R. Ferry,
D. Popov,
S. B. Donald,
P. Söderlind,
D. J. Campbell,
J. Paglione,
K. Huang,
R. E. Baumbach,
R. J. Zieve,
J. R. Jeffries
Abstract:
We report a comprehensive structural and valence study of the intermediate valent materials YbNiGa$_{4}$ and YbNiIn$_{4}$ under pressures up to 60 GPa. YbNiGa$_{4}$ undergoes a smooth volume contraction and shows steady increase in Yb-valence with pressure, though the Yb-valence reaches saturation around 25 GPa. In YbNiIn$_{4}$, a change in pressure dependence of the volume and a peak in Yb-valenc…
▽ More
We report a comprehensive structural and valence study of the intermediate valent materials YbNiGa$_{4}$ and YbNiIn$_{4}$ under pressures up to 60 GPa. YbNiGa$_{4}$ undergoes a smooth volume contraction and shows steady increase in Yb-valence with pressure, though the Yb-valence reaches saturation around 25 GPa. In YbNiIn$_{4}$, a change in pressure dependence of the volume and a peak in Yb-valence suggest a pressure induced electronic topological transition occurs around 10-14 GPa. In the pressure region where YbNiIn$_{4}$ and YbNiGa$_{4}$ possess similar Yb-Yb spacings the Yb-valence reveals a precipitous drop. This drop is not captured by density-functional-theory calculations and implies that both the lattice degrees of freedom and the chemical environment play an important role in establishing the valence of Yb.
△ Less
Submitted 14 December, 2018;
originally announced December 2018.
-
Single-Volume Neutron Scatter Camera for High-Efficiency Neutron Imaging and Spectroscopy
Authors:
Joshua Braverman,
James Brennan,
Erik Brubaker,
Belkis Cabrera-Palmer,
Steven Czyz,
Peter Marleau,
John Mattingly,
Aaron Nowack,
John Steele,
Melinda Sweany,
Kyle Weinfurther,
Eli Woods
Abstract:
Neutron detection provides an effective method to detect, locate, and characterize sources of interest to nuclear security applications. Current neutron imaging systems based on double-scatter kinematic reconstruction provide good signal vs. background discrimination and spectral capability, but suffer from poor sensitivity due to geometrical constraints. This weakness can be overcome if both neut…
▽ More
Neutron detection provides an effective method to detect, locate, and characterize sources of interest to nuclear security applications. Current neutron imaging systems based on double-scatter kinematic reconstruction provide good signal vs. background discrimination and spectral capability, but suffer from poor sensitivity due to geometrical constraints. This weakness can be overcome if both neutron-proton scattering interactions are detected and resolved within one large contiguous active detector volume. We describe here a maximum likelihood approach to event reconstruction in a single-volume system with no optical segmentation and sensitivity to individual optical photons on the surfaces of the scintillator. We present results from a Geant4-based simulation establishing the feasibility of this single-volume neutron scatter camera concept given notional performance of existing photodetector and readout technologies.
△ Less
Submitted 14 February, 2018;
originally announced February 2018.
-
On the Relationship Between Scintillation Anisotropy and Crystal Structure in Pure Crystalline Organic Scintillator Materials
Authors:
Patricia Schuster,
Patrick Feng,
Erik Brubaker
Abstract:
The scintillation anisotropy effect for proton recoil events has been investigated in five pure organic crystalline materials: anthracene, trans-stilbene, p-terphenyl, bibenzyl, and diphenylacetylene. These measurements include characterization of the scintillation response for one hemisphere of proton recoil directions in each crystal. In addition to standard measurements of the total light outpu…
▽ More
The scintillation anisotropy effect for proton recoil events has been investigated in five pure organic crystalline materials: anthracene, trans-stilbene, p-terphenyl, bibenzyl, and diphenylacetylene. These measurements include characterization of the scintillation response for one hemisphere of proton recoil directions in each crystal. In addition to standard measurements of the total light output and pulse shape at each angle, the prompt and delayed light anisotropies are analyzed, allowing for investigation of the singlet and triplet molecular excitation behaviors independently. This work provides new quantitative and qualitative observations that make progress toward understanding the physical mechanisms behind the scintillation anisotropy. These measurements show that the relationship between the prompt and delayed light anisotropies is correlated with crystal structure, as it changes between the pi-stacked crystal structure materials (anthracene and p-terphenyl) and the herringbone crystal structure materials (stilbene, bibenzyl, and diphenylacetylene). The observations are consistent with a model in which there are preferred directions of kinetic processes for the molecular excitations. These processes and the impact of their directional dependencies on the scintillation anisotropy are discussed.
△ Less
Submitted 2 May, 2018; v1 submitted 29 November, 2017;
originally announced November 2017.
-
Pressure dependence of Ce valence in CeRhIn5
Authors:
Z. E. Brubaker,
R. L. Stillwell,
P. Chow,
Y. Xiao,
C. Kenney-Benson,
R. Ferry,
Z. Jenei,
R. J. Zieve,
J. R. Jeffries
Abstract:
We have studied the Ce valence as a function of pressure in CeRhIn5 at 300 K and at 22 K using x-ray absorption spectroscopy in partial fluorescent yield mode. At room temperature, we found no detectable change in Ce valence greater than 0.01 up to a pressure of 5.5 GPa. At 22 K, the valence remains robust against pressure below 6 GPa, in contrast to the predicted valence crossover at P=2.35 GPa.…
▽ More
We have studied the Ce valence as a function of pressure in CeRhIn5 at 300 K and at 22 K using x-ray absorption spectroscopy in partial fluorescent yield mode. At room temperature, we found no detectable change in Ce valence greater than 0.01 up to a pressure of 5.5 GPa. At 22 K, the valence remains robust against pressure below 6 GPa, in contrast to the predicted valence crossover at P=2.35 GPa. This work yields an upper limit for the change in Ce-valence and suggests that the critical valence fluctuation scenario, in its current form, is unlikely.
△ Less
Submitted 17 November, 2017;
originally announced November 2017.
-
Model-based Design Evaluation of a Compact, High-Efficiency Neutron Scatter Camera
Authors:
Kyle Weinfurther,
John Mattingly,
Erik Brubaker,
John Steele
Abstract:
This paper presents the model-based design and evaluation of an instrument that estimates incident neutron direction using the kinematics of neutron scattering by hydrogen-1 nuclei in an organic scintillator. The instrument design uses a single, nearly contiguous volume of organic scintillator that is internally subdivided only as necessary to create optically isolated pillars. Scintillation light…
▽ More
This paper presents the model-based design and evaluation of an instrument that estimates incident neutron direction using the kinematics of neutron scattering by hydrogen-1 nuclei in an organic scintillator. The instrument design uses a single, nearly contiguous volume of organic scintillator that is internally subdivided only as necessary to create optically isolated pillars. Scintillation light emitted in a given pillar is confined to that pillar by a combination of total internal reflection and a specular reflector applied to the four sides of the pillar transverse to its long axis. The scintillation light is collected at each end of the pillar using a photodetector. In this optically segmented design, the (x, y) position of scintillation light emission (where the x and y coordinates are transverse to the long axis of the pillars) is estimated as the pillar's (x, y) position in the scintillator "block", and the z-position (the position along the pillar's long axis) is estimated from the amplitude and relative timing of the signals produced by the photodetectors at each end of the pillar. For proton recoils greater than 1 MeV, we show that the (x, y, z)-position of neutron-proton scattering can be estimated with < 1 cm root-mean-squared [RMS] error and the proton recoil energy can be estimated with < 50 keV RMS error by fitting the photodetectors' response time history to models of optical photon transport within the scintillator pillars. Finally, we evaluate several alternative designs of this proposed single-volume scatter camera made of pillars of plastic scintillator (SVSC-PiPS), studying the effect of pillar dimensions, scintillator material, and photodetector response vs. time. Specifically, we conclude that an SVSC-PiPS constructed using EJ-204 and an MCP-PM will produce the most precise estimates of incident neutron direction and energy.
△ Less
Submitted 17 October, 2017;
originally announced October 2017.
-
Source detection at 100 meter standoff with a time-encoded imaging system
Authors:
J. Brennan,
E. Brubaker,
M. Gerling,
P. Marleau,
M. Monterial,
A. Nowack,
P. Schuster,
B. Sturm,
M. Sweany
Abstract:
We present the design, characterization, and testing of a laboratory prototype radiological search and localization system. The system, based on time-encoded imaging, uses the attenuation signature of neutrons in time, induced by the geometrical layout and motion of the system. We have demonstrated the ability to detect a ~1 mCi Cf-252 radiological source at 100 m standoff with 90% detection effic…
▽ More
We present the design, characterization, and testing of a laboratory prototype radiological search and localization system. The system, based on time-encoded imaging, uses the attenuation signature of neutrons in time, induced by the geometrical layout and motion of the system. We have demonstrated the ability to detect a ~1 mCi Cf-252 radiological source at 100 m standoff with 90% detection efficiency and 10% false positives against background in 12 min. This same detection efficiency is met at 15 s for a 40 m standoff, and 1.2 s for a 20 m standoff.
△ Less
Submitted 5 September, 2017; v1 submitted 13 June, 2017;
originally announced June 2017.
-
Fast neutron background characterization with the Radiological Multi-sensor Analysis Platform (RadMAP)
Authors:
John R. Davis,
Erik Brubaker,
Kai Vetter
Abstract:
In an effort to characterize the fast neutron radiation background, 16 EJ-309 liquid scintillator cells were installed in the Radiological Multi-sensor Analysis Platform (RadMAP) to collect data in the San Francisco Bay Area. Each fast neutron event was associated with specific weather metrics (pressure, temperature, absolute humidity) and GPS coordinates. The expected exponential dependence of th…
▽ More
In an effort to characterize the fast neutron radiation background, 16 EJ-309 liquid scintillator cells were installed in the Radiological Multi-sensor Analysis Platform (RadMAP) to collect data in the San Francisco Bay Area. Each fast neutron event was associated with specific weather metrics (pressure, temperature, absolute humidity) and GPS coordinates. The expected exponential dependence of the fast neutron count rate on atmospheric pressure was demonstrated and event rates were subsequently adjusted given the measured pressure at the time of detection. Pressure adjusted data was also used to investigate the influence of other environmental conditions on the neutron background rate. Using National Oceanic and Atmospheric Administration (NOAA) coastal area lidar data, an algorithm was implemented to approximate sky-view factors (the total fraction of visible sky) for points along RadMAPs route. Three areas analyzed in San Francisco, Downtown Oakland, and Berkeley all demonstrated a suppression in the background rate of over 50% for the range of sky-view factors measured. This effect, which is due to the shielding of cosmic-ray produced neutrons by surrounding buildings, was comparable to the pressure influence which yielded a 32% suppression in the count rate over the range of pressures measured.
△ Less
Submitted 15 November, 2016;
originally announced November 2016.
-
Characterization of the scintillation anisotropy in crystalline stilbene scintillator detectors
Authors:
Patricia Schuster,
Erik Brubaker
Abstract:
This paper reports a series of measurements that characterize the directional dependence of the scintillation response of crystalline melt-grown and solution-grown stilbene to incident DT and DD neutrons. These measurements give the amplitude and pulse shape dependence on the proton recoil direction over one hemisphere of the crystal, confirming and extending previous results in the literature for…
▽ More
This paper reports a series of measurements that characterize the directional dependence of the scintillation response of crystalline melt-grown and solution-grown stilbene to incident DT and DD neutrons. These measurements give the amplitude and pulse shape dependence on the proton recoil direction over one hemisphere of the crystal, confirming and extending previous results in the literature for melt-grown stilbene and providing the first measurements for solution-grown stilbene. In similar measurements of liquid and plastic detectors, no directional dependence was observed, confirming the hypothesis that the anisotropy in stilbene and other organic crystal scintillators is a result of internal effects due to the molecular or crystal structure and not an external effect on the measurement system.
△ Less
Submitted 21 June, 2016;
originally announced June 2016.
-
Development of an Ideal Observer that Incorporates Nuisance Parameters and Processes List-Mode Data
Authors:
Christopher J. MacGahan,
Matthew A. Kupinski,
Nathan R. Hilton,
Erik M. Brubaker,
William C. Johnson
Abstract:
Observer models were developed to process data in list-mode format in order to perform binary discrimination tasks for use in an arms-control-treaty context. Data used in this study was generated using GEANT4 Monte Carlo simulations for photons using custom models of plutonium inspection objects and a radiation imaging system. Observer model performance was evaluated and presented using the area u…
▽ More
Observer models were developed to process data in list-mode format in order to perform binary discrimination tasks for use in an arms-control-treaty context. Data used in this study was generated using GEANT4 Monte Carlo simulations for photons using custom models of plutonium inspection objects and a radiation imaging system. Observer model performance was evaluated and presented using the area under the receiver operating characteristic curve. The ideal observer was studied under both signal-known-exactly conditions and in the presence of unknowns such as object orientation and absolute count-rate variability; when these additional sources of randomness were present, their incorporation into the observer yielded superior performance.
△ Less
Submitted 2 February, 2016;
originally announced February 2016.
-
Investigating the anisotropic scintillation response in anthracene through neutron, gamma-ray, and muon measurements
Authors:
Patricia Schuster,
Erik Brubaker
Abstract:
This paper reports a series of measurements that characterize the directional dependence of the scintillation response of crystalline anthracene to incident DT neutrons, DD neutrons, Cs-137 gamma rays, and, for the first time, cosmic ray muons. The neutron measurements give the amplitude and pulse shape dependence on the proton recoil direction over one hemisphere of the crystal, confirming and ex…
▽ More
This paper reports a series of measurements that characterize the directional dependence of the scintillation response of crystalline anthracene to incident DT neutrons, DD neutrons, Cs-137 gamma rays, and, for the first time, cosmic ray muons. The neutron measurements give the amplitude and pulse shape dependence on the proton recoil direction over one hemisphere of the crystal, confirming and extending previous results in the literature. In similar measurements using incident gamma rays, no directional effect is evident, and any anisotropy with respect to the electron recoil direction is constrained to have a magnitude of less than a tenth of that present in the proton recoil events. Cosmic muons are measured at two directions, and no anisotropy is observed. This set of observations indicates that high dE/dx is necessary for an anisotropy to be present for a given type of scintillation event, which in turn could be used to discriminate among different hypotheses for the underlying causes of the anisotropy, which are not well understood.
△ Less
Submitted 31 October, 2015;
originally announced November 2015.
-
Studying the Underlying Event in Drell-Yan and High Transverse Momentum Jet Production at the Tevatron
Authors:
The CDF Collaboration,
T. Aaltonen,
J. Adelman,
B. Alvarez Gonzalez,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
A. Attal,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
G. Bauer
, et al. (554 additional authors not shown)
Abstract:
We study the underlying event in proton-antiproton collisions by examining the behavior of charged particles (transverse momentum pT > 0.5 GeV/c, pseudorapidity |η| < 1) produced in association with large transverse momentum jets (~2.2 fb-1) or with Drell-Yan lepton-pairs (~2.7 fb-1) in the Z-boson mass region (70 < M(pair) < 110 GeV/c2) as measured by CDF at 1.96 TeV center-of-mass energy. We u…
▽ More
We study the underlying event in proton-antiproton collisions by examining the behavior of charged particles (transverse momentum pT > 0.5 GeV/c, pseudorapidity |η| < 1) produced in association with large transverse momentum jets (~2.2 fb-1) or with Drell-Yan lepton-pairs (~2.7 fb-1) in the Z-boson mass region (70 < M(pair) < 110 GeV/c2) as measured by CDF at 1.96 TeV center-of-mass energy. We use the direction of the lepton-pair (in Drell-Yan production) or the leading jet (in high-pT jet production) in each event to define three regions of η-φspace; toward, away, and transverse, where φis the azimuthal scattering angle. For Drell-Yan production (excluding the leptons) both the toward and transverse regions are very sensitive to the underlying event. In high-pT jet production the transverse region is very sensitive to the underlying event and is separated into a MAX and MIN transverse region, which helps separate the hard component (initial and final-state radiation) from the beam-beam remnant and multiple parton interaction components of the scattering. The data are corrected to the particle level to remove detector effects and are then compared with several QCD Monte-Carlo models. The goal of this analysis is to provide data that can be used to test and improve the QCD Monte-Carlo models of the underlying event that are used to simulate hadron-hadron collisions.
△ Less
Submitted 16 March, 2010;
originally announced March 2010.
-
The Evolution of FTK, a Real-Time Tracker for Hadron Collider Experiments
Authors:
A. Annovi,
M. Beretta,
P. Laurelli,
E. Bossini,
V. Cavasinni,
F. Crescioli,
M. Dell'Orso,
P. Giannetti,
M. Piendibene,
G. Punzi,
F. Sarri,
I. Vivarelli,
G. Volpi,
L. Sartori,
A. Boveia,
E. Brubaker,
F. Canelli,
M. Dunford,
A. Kapliy,
Y. K. Kim,
C. Melachrinos,
M. Shochet,
J. Tuggle,
H. DeBerg,
A. McCarn
, et al. (8 additional authors not shown)
Abstract:
We describe the architecture evolution of the highly-parallel dedicated processor FTK, which is driven by the simulation of LHC events at high luminosity (1034 cm-2 s-1). FTK is able to provide precise on-line track reconstruction for future hadronic collider experiments. The processor, organized in a two-tiered pipelined architecture, execute very fast algorithms based on the use of a large ban…
▽ More
We describe the architecture evolution of the highly-parallel dedicated processor FTK, which is driven by the simulation of LHC events at high luminosity (1034 cm-2 s-1). FTK is able to provide precise on-line track reconstruction for future hadronic collider experiments. The processor, organized in a two-tiered pipelined architecture, execute very fast algorithms based on the use of a large bank of pre-stored patterns of trajectory points (first tier) in combination with full resolution track fitting to refine pattern recognition and to determine off-line quality track parameters. We describe here how the high luminosity simulation results have produced a new organization of the hardware inside the FTK processor core.
△ Less
Submitted 20 November, 2009;
originally announced November 2009.
-
Development of FTK architecture: a fast hardware track trigger for the ATLAS detector
Authors:
A. Annovi,
M. Beretta,
E. Bossini,
A. Boveia,
E. Brubaker,
F. Canelli,
V. Cavasinni,
F. Crescioli,
H. DeBerg,
M. Dell'Orso,
M. Dunford,
M. Franklin,
P. Giannetti,
A. Kapliy,
Y. K. Kim,
N. Kimura,
P. Laurelli,
A. McCarn,
C. Melachrinos,
C. Mills,
M. Neubauer,
J. Proudfoot,
M. Piendibene,
G. Punzi,
F. Sarri
, et al. (8 additional authors not shown)
Abstract:
The Fast Tracker (FTK) is a proposed upgrade to the ATLAS trigger system that will operate at full Level-1 output rates and provide high quality tracks reconstructed over the entire detector by the start of processing in Level-2. FTK solves the combinatorial challenge inherent to tracking by exploiting the massive parallelism of Associative Memories (AM) that can compare inner detector hits to m…
▽ More
The Fast Tracker (FTK) is a proposed upgrade to the ATLAS trigger system that will operate at full Level-1 output rates and provide high quality tracks reconstructed over the entire detector by the start of processing in Level-2. FTK solves the combinatorial challenge inherent to tracking by exploiting the massive parallelism of Associative Memories (AM) that can compare inner detector hits to millions of pre-calculated patterns simultaneously. The tracking problem within matched patterns is further simplified by using pre-computed linearized fitting constants and leveraging fast DSP's in modern commercial FPGA's. Overall, FTK is able to compute the helix parameters for all tracks in an event and apply quality cuts in approximately one millisecond. By employing a pipelined architecture, FTK is able to continuously operate at Level-1 rates without deadtime. The system design is defined and studied using ATLAS full simulation. Reconstruction quality is evaluated for single muon events with zero pileup, as well as WH events at the LHC design luminosity. FTK results are compared with the tracking capability of an offline algorithm.
△ Less
Submitted 6 October, 2009;
originally announced October 2009.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.
-
Top Quark Mass Measurements at CDF
Authors:
Erik Brubaker
Abstract:
The mass of the top quark M_top is interesting both as a fundamental parameter of the standard model and as an important input to precision electroweak tests. The Collider Detector at Fermilab (CDF) has a robust program of top quark mass analyses, including the most precise single measurement, M_top = 173.4 +/- 2.8 GeV/c^2, using 680 pb^-1 of ppbar collision data. A combination of current result…
▽ More
The mass of the top quark M_top is interesting both as a fundamental parameter of the standard model and as an important input to precision electroweak tests. The Collider Detector at Fermilab (CDF) has a robust program of top quark mass analyses, including the most precise single measurement, M_top = 173.4 +/- 2.8 GeV/c^2, using 680 pb^-1 of ppbar collision data. A combination of current results from CDF gives M_top = 172.0 +/- 2.7 GeV/c^2, surpassing the stated goal of 3 GeV/c^2 precision using 2 fb^-1 of data. Finally, a combination with current D0 results gives a world average top quark mass of 172.5 +/- 2.3 GeV/c^2.
△ Less
Submitted 19 May, 2006;
originally announced May 2006.
-
Search for First-Generation Scalar Leptoquarks in $\bm{p \bar{p}}$ collisions at $\sqrt{s}$=1.96 TeV
Authors:
The CDF Collaboration,
D. Acosta,
J. Adelman,
T. Affolder,
T. Akimoto,
M. G. Albrow,
D. Ambrose,
S. Amerio,
D. Amidei,
A. Anastassov,
K. Anikeev,
A. Annovi,
J. Antos,
M. Aoki,
G. Apollinari,
T. Arisawa,
J-F. Arguin,
A. Artikov,
W. Ashmanskas,
A. Attal,
F. Azfar,
P. Azzi-Bacchetta,
N. Bacchetta,
H. Bachacou,
W. Badgett
, et al. (605 additional authors not shown)
Abstract:
We report on a search for pair production of first-generation scalar leptoquarks ($LQ$) in $p \bar{p}$ collisions at $\sqrt{s}$=1.96 TeV using an integrated luminosity of 203 $pb^{-1}$ collected at the Fermilab Tevatron collider by the CDF experiment. We observe no evidence for $LQ$ production in the topologies arising from $LQ \bar{LQ} \to eqeq$ and $LQ \bar{LQ} \to eq νq$, and derive 95% C.L.…
▽ More
We report on a search for pair production of first-generation scalar leptoquarks ($LQ$) in $p \bar{p}$ collisions at $\sqrt{s}$=1.96 TeV using an integrated luminosity of 203 $pb^{-1}$ collected at the Fermilab Tevatron collider by the CDF experiment. We observe no evidence for $LQ$ production in the topologies arising from $LQ \bar{LQ} \to eqeq$ and $LQ \bar{LQ} \to eq νq$, and derive 95% C.L. upper limits on the $LQ$ production cross section. %as a function of $β$, where $β$ is the branching fraction for $LQ \to eq$. The results are combined with those obtained from a separately reported CDF search in the topology arising from $LQ\bar{LQ} \to νq νq$ and 95% C.L. lower limits on the LQ mass as a function of $β= BR(LQ \to eq) $ are derived. The limits are 236, 205 and 145 GeV/c$^2$ for $β$ = 1, $β$ = 0.5 and $β$ = 0.1, respectively.
△ Less
Submitted 29 June, 2005;
originally announced June 2005.
-
Comparison of Three-jet Events in Proton-Antiproton Collisions at Center-of-mass Energy 1.8 TeV to Predictions from a Next-to-leading Order QCD Calculation
Authors:
D. Acosta,
T. Affolder,
M. G. Albrow,
D. Ambrose,
D. Amidei,
K. Anikeev,
J. Antos,
G. Apollinari,
T. Arisawa,
A. Artikov,
W. Ashmanskas,
F. Azfar,
P. Azzi-Bacchetta,
N. Bacchetta,
H. Bachacou,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
S. Baroiant,
M. Barone,
G. Bauer,
F. Bedeschi,
S. Behari,
S. Belforte
, et al. (388 additional authors not shown)
Abstract:
The properties of three-jet events with total transverse energy greater than 320 GeV and individual jet energy greater than 20 GeV have been analyzed and compared to absolute predictions from a next-to-leading order (NLO) perturbative QCD calculation. These data, of integrated luminosity 86 pb^-1, were recorded by the CDF Experiment for proton-antiproton collisions at sqrt{s}=1.8 TeV. This study…
▽ More
The properties of three-jet events with total transverse energy greater than 320 GeV and individual jet energy greater than 20 GeV have been analyzed and compared to absolute predictions from a next-to-leading order (NLO) perturbative QCD calculation. These data, of integrated luminosity 86 pb^-1, were recorded by the CDF Experiment for proton-antiproton collisions at sqrt{s}=1.8 TeV. This study tests a model of higher order QCD processes that result in gluon emission and can be used to estimate the magnitude of the contribution of processes higher than NLO. The total cross section is measured to be 466 +/- 3(stat.)^{+207}_{-70}(syst.) pb. The differential cross section is furthermore measured for all kinematically accessible regions of the Dalitz plane, including those for which the theoretical prediction is unreliable. While the measured cross section is consistent with the theoretical prediction in magnitude, the two differ somewhat in shape in the Dalitz plane.
△ Less
Submitted 6 October, 2004;
originally announced October 2004.
