Showing 1–50 of 52 results for author: Brown, J D

Extended body dynamics in general relativity: hyperelastic models

Authors: Nishita Jadoo, J. David Brown, Charles R. Evans

Abstract: We present a numerical framework for modeling extended hyperelastic bodies based on a Lagrangian formulation of general relativistic elasticity theory. We use finite element methods to discretize the body, then use the semi--discrete action to derive ordinary differential equations of motion for the discrete nodes. The nodes are evolved in time using fourth--order Runge--Kutta. We validate our cod… ▽ More We present a numerical framework for modeling extended hyperelastic bodies based on a Lagrangian formulation of general relativistic elasticity theory. We use finite element methods to discretize the body, then use the semi--discrete action to derive ordinary differential equations of motion for the discrete nodes. The nodes are evolved in time using fourth--order Runge--Kutta. We validate our code against the normal modes of oscillation of a hyperelastic sphere, which are known analytically in the limit of small (linear), slow (Newtonian) oscillations. The algorithm displays second order convergence. This numerical framework can be used to obtain the orbital motion and internal dynamics of a hyperelastic body of any shape, for any spacetime metric, and for varying hyperelastic energy models. △ Less

Submitted 17 October, 2023; v1 submitted 15 August, 2023; originally announced August 2023.

Comments: Corrected typos

Journal ref: Phys. Rev. D 108, 084020 (2023)

Dual-Modality Haptic Feedback Improves Dexterous Task Execution with Virtual EMG-Controlled Gripper

Authors: Kezi Li, Jeremy D. Brown

Abstract: Upper-extremity amputees who use myoelectric prostheses currently lack the haptic sensory information needed to perform dexterous activities of daily living. While considerable research has focused on restoring this haptic information, these approaches often rely on single-modality feedback schemes which are necessary but insufficient for the feedforward and feedback control strategies employed by… ▽ More Upper-extremity amputees who use myoelectric prostheses currently lack the haptic sensory information needed to perform dexterous activities of daily living. While considerable research has focused on restoring this haptic information, these approaches often rely on single-modality feedback schemes which are necessary but insufficient for the feedforward and feedback control strategies employed by the central nervous system. Multi-modality feedback approaches have been gaining attention in several application domains, however, the utility for myoelectric prosthesis use remains unclear. In this study, we investigated the utility of dual-modality haptic feedback in a virtual EMG-controlled grasp-and-hold task with a brittle object and variable load force. We recruited N=20 non-amputee participants to perform the task in four conditions: no feedback, vibration feedback of incipient slip, squeezing feedback of grip force, and dual (vibration + squeezing) feedback of incipient slip and grip force. Results suggest that receiving any feedback is better than receiving none, however, dual-modality feedback is far superior to either single-modality feedback approach in terms of preventing the object from breaking or drop**, even after it started slip**. Control with dual-modality feedback was also seen as more intuitive than with either of the single-modality feedback approaches. △ Less

Submitted 30 September, 2022; originally announced September 2022.

Singular Lagrangians and the Dirac--Bergmann Algorithm in Classical Mechanics

Authors: J. David Brown

Abstract: Textbook treatments of classical mechanics typically assume that the Lagrangian is nonsingular. That is, the matrix of second derivatives of the Lagrangian with respect to the velocities is invertible. This assumption insures that (i) Lagrange's equations can be solved for the accelerations as functions of coordinates and velocities, and (ii) the definition of the conjugate momenta can be inverted… ▽ More Textbook treatments of classical mechanics typically assume that the Lagrangian is nonsingular. That is, the matrix of second derivatives of the Lagrangian with respect to the velocities is invertible. This assumption insures that (i) Lagrange's equations can be solved for the accelerations as functions of coordinates and velocities, and (ii) the definition of the conjugate momenta can be inverted for the velocities as functions of coordinates and momenta. This assumption, however, is unnecessarily restrictive -- there are interesting classical dynamical systems with singular Lagrangians. The algorithm for analyzing such systems was developed by Dirac and Bergmann in the 1950's. After a brief review of the Dirac--Bergmann algorithm, several physical examples are constructed from familiar components: point masses connected by massless springs, rods, cords and pulleys. The algorithm is also used to develop an initial value formulation of systems with holonomic constraints. △ Less

Submitted 26 February, 2023; v1 submitted 30 June, 2022; originally announced July 2022.

Comments: 28 pages, 7 figures

Journal ref: American Journal of Physics 91, 214 (2023)

A Multi-purpose Realistic Haze Benchmark with Quantifiable Haze Levels and Ground Truth

Authors: Priya Narayanan, Xin Hu, Zhenyu Wu, Matthew D Thielke, John G Rogers, Andre V Harrison, John A D'Agostino, James D Brown, Long P Quang, James R Uplinger, Heesung Kwon, Zhangyang Wang

Abstract: Imagery collected from outdoor visual environments is often degraded due to the presence of dense smoke or haze. A key challenge for research in scene understanding in these degraded visual environments (DVE) is the lack of representative benchmark datasets. These datasets are required to evaluate state-of-the-art vision algorithms (e.g., detection and tracking) in degraded settings. In this paper… ▽ More Imagery collected from outdoor visual environments is often degraded due to the presence of dense smoke or haze. A key challenge for research in scene understanding in these degraded visual environments (DVE) is the lack of representative benchmark datasets. These datasets are required to evaluate state-of-the-art vision algorithms (e.g., detection and tracking) in degraded settings. In this paper, we address some of these limitations by introducing the first realistic hazy image benchmark, from both aerial and ground view, with paired haze-free images, and in-situ haze density measurements. This dataset was produced in a controlled environment with professional smoke generating machines that covered the entire scene, and consists of images captured from the perspective of both an unmanned aerial vehicle (UAV) and an unmanned ground vehicle (UGV). We also evaluate a set of representative state-of-the-art dehazing approaches as well as object detectors on the dataset. The full dataset presented in this paper, including the ground truth object classification bounding boxes and haze density measurements, is provided for the community to evaluate their algorithms at: https://a2i2-archangel.vision. A subset of this dataset has been used for the ``Object Detection in Haze'' Track of CVPR UG2 2022 challenge at http://cvpr2022.ug2challenge.org/track1.html. △ Less

Submitted 11 February, 2023; v1 submitted 13 June, 2022; originally announced June 2022.

Comments: This paper has been ACCEPTED for publication as a REGULAR paper in the IEEE Transactions on Image Processing (TIP)

Haptic Shared Control Improves Neural Efficiency During Myoelectric Prosthesis Use

Authors: Neha Thomas, Alexandra J. Miller, Hasan Ayaz, Jeremy D. Brown

Abstract: Clinical myoelectric prostheses lack the sensory feedback and sufficient dexterity required to complete activities of daily living efficiently and accurately. Providing haptic feedback of relevant environmental cues to the user or imbuing the prosthesis with autonomous control authority have been separately shown to improve prosthesis utility. Few studies, however, have investigated the effect of… ▽ More Clinical myoelectric prostheses lack the sensory feedback and sufficient dexterity required to complete activities of daily living efficiently and accurately. Providing haptic feedback of relevant environmental cues to the user or imbuing the prosthesis with autonomous control authority have been separately shown to improve prosthesis utility. Few studies, however, have investigated the effect of combining these two approaches in a shared control paradigm, and none have evaluated such an approach from the perspective of neural efficiency (the relationship between task performance and mental effort measured directly from the brain). In this work, we analyzed the neural efficiency of 30 non-amputee participants in a grasp-and-lift task of a brittle object. Here, a myoelectric prosthesis featuring vibrotactile feedback of grip force and autonomous control of gras** was compared with a standard myoelectric prosthesis with and without vibrotactile feedback. As a measure of mental effort, we captured the prefrontal cortex activity changes using functional near infrared spectroscopy during the experiment. Results showed that only the haptic shared control system enabled users to achieve high neural efficiency, and that vibrotactile feedback was important for gras** with the appropriate grip force. These results indicate that the haptic shared control system synergistically combines the benefits of haptic feedback and autonomous controllers, and is well-poised to inform such hybrid advancements in myoelectric prosthesis technology. △ Less

Submitted 27 May, 2022; originally announced May 2022.

The Utility of Synthetic Reflexes and Haptic Feedback for Upper-Limb Prostheses in a Dexterous Task Without Direct Vision

Authors: Neha Thomas, Farimah Fazlollahi, Katherine J. Kuchenbecker, Jeremy D. Brown

Abstract: Individuals who use myoelectric upper-limb prostheses often rely heavily on vision to complete their daily activities. They thus struggle in situations where vision is overloaded, such as multitasking, or unavailable, such as poor lighting conditions. Non-amputees can easily accomplish such tasks due to tactile reflexes and haptic sensation guiding their upper-limb motor coordination. Based on the… ▽ More Individuals who use myoelectric upper-limb prostheses often rely heavily on vision to complete their daily activities. They thus struggle in situations where vision is overloaded, such as multitasking, or unavailable, such as poor lighting conditions. Non-amputees can easily accomplish such tasks due to tactile reflexes and haptic sensation guiding their upper-limb motor coordination. Based on these principles, we developed and tested two novel prosthesis systems that incorporate autonomous controllers and provide the user with touch-location feedback through either vibration or distributed pressure. These capabilities were made possible by installing a custom contact-location sensor on thefingers of a commercial prosthetic hand, along with a custom pressure sensor on the thumb. We compared the performance of the two systems against a standard myoelectric prosthesis and a myoelectric prosthesis with only autonomous controllers in a difficult reach-to-pick-and-place task conducted without direct vision. Results from 40 non-amputee participants in this between-subjects study indicated that vibrotactile feedback combined with synthetic reflexes proved significantly more advantageous than the standard prosthesis in several of the task milestones. In addition, vibrotactile feedback and synthetic reflexes improved grasp placement compared to only synthetic reflexes or pressure feedback combined with synthetic reflexes. These results indicate that both autonomous controllers and haptic feedback facilitate success in dexterous tasks without vision, and that the type of haptic display matters. △ Less

Submitted 27 May, 2022; originally announced May 2022.

Wrist-Squeezing Force Feedback Improves Accuracy and Speed in Robotic Surgery Training

Authors: Sergio Machaca, Eric Cao, Amy Chi, Gina Adrales, Katherine J Kuchenbecker, Jeremy D Brown

Abstract: Current robotic minimally invasive surgery (RMIS) platforms provide surgeons with no haptic feedback of the robot's physical interactions. This limitation forces surgeons to rely heavily on visual feedback and can make it challenging for surgical trainees to manipulate tissue gently. Prior research has demonstrated that haptic feedback can increase task accuracy in RMIS training. However, it remai… ▽ More Current robotic minimally invasive surgery (RMIS) platforms provide surgeons with no haptic feedback of the robot's physical interactions. This limitation forces surgeons to rely heavily on visual feedback and can make it challenging for surgical trainees to manipulate tissue gently. Prior research has demonstrated that haptic feedback can increase task accuracy in RMIS training. However, it remains unclear whether these improvements represent a fundamental improvement in skill, or if they simply stem from re-prioritizing accuracy over task completion time. In this study, we provide haptic feedback of the force applied by the surgical instruments using custom wrist-squeezing devices. We hypothesize that individuals receiving haptic feedback will increase accuracy (produce less force) while increasing their task completion time, compared to a control group receiving no haptic feedback. To test this hypothesis, N=21 novice participants were asked to repeatedly complete a ring rollercoaster surgical training task as quickly as possible. Results show that participants receiving haptic feedback apply significantly less force (0.67 N) than the control group, and they complete the task no faster or slower than the control group after twelve repetitions. Furthermore, participants in the feedback group decreased their task completion times significantly faster (7.68%) than participants in the control group (5.26%). This form of haptic feedback, therefore, has the potential to help trainees improve their technical accuracy without compromising speed. △ Less

Submitted 31 March, 2023; v1 submitted 13 May, 2022; originally announced May 2022.

Comments: 6 figures, 8 pages

Journal ref: 2022 9th IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics, Seoul, Republic of Korea, pp. 1-8

Singular Lagrangians, Constrained Hamiltonian Systems and Gauge Invariance: An Example of the Dirac-Bergmann Algorithm

Authors: J. David Brown

Abstract: The Dirac-Bergmann algorithm is a recipe for converting a theory with a singular Lagrangian into a constrained Hamiltonian system. Constrained Hamiltonian systems include gauge theories -- general relativity, electromagnetism, Yang Mills, string theory, etc. The Dirac-Bergmann algorithm is elegant but at the same time rather complicated. It consists of a large number of logical steps linked togeth… ▽ More The Dirac-Bergmann algorithm is a recipe for converting a theory with a singular Lagrangian into a constrained Hamiltonian system. Constrained Hamiltonian systems include gauge theories -- general relativity, electromagnetism, Yang Mills, string theory, etc. The Dirac-Bergmann algorithm is elegant but at the same time rather complicated. It consists of a large number of logical steps linked together by a subtle chain of reasoning. Examples of the Dirac-Bergmann algorithm found in the literature are designed to isolate and illustrate just one or two of those logical steps. In this paper I analyze a finite-dimensional system that exhibits all of the major steps in the algorithm. The system includes primary and secondary constraints, first and second class constraints, restrictions on Lagrange multipliers, and both physical and gauge degrees of freedom. This relatively simple system provides a platform for discussing the Dirac conjecture, constructing Dirac brackets, and applying gauge conditions. △ Less

Submitted 9 March, 2022; v1 submitted 17 January, 2022; originally announced January 2022.

Comments: Final Version

Journal ref: Universe 2022, 8(3), 171

Generalized geodesic deviation in de Sitter spacetime

Authors: Isaac Raj Waldstein, J. David Brown

Abstract: The geodesic deviation equation (GDE) describes the tendency of objects to accelerate towards or away from each other due to spacetime curvature. The GDE assumes that nearby geodesics have a small rate of separation, which is formally treated as the same order in smallness as the separation itself. This assumption is discussed in various papers, but is typically not recognized in textbooks. Relaxi… ▽ More The geodesic deviation equation (GDE) describes the tendency of objects to accelerate towards or away from each other due to spacetime curvature. The GDE assumes that nearby geodesics have a small rate of separation, which is formally treated as the same order in smallness as the separation itself. This assumption is discussed in various papers, but is typically not recognized in textbooks. Relaxing this assumption leads to the generalized geodesic deviation equation (GGDE). We demonstrate the distinction between the GDE and the GGDE by computing the relative acceleration between timelike geodesics in two-dimensional de Sitter spacetime. We do this by considering a fiducial geodesic and a secondary geodesic (both timelike) that cross with nonzero speed. These geodesics are spanned by a spacelike geodesic, whose tangent evaluated at the fiducial geodesic defines the separation. The second derivative of the separation describes the relative acceleration between the fiducial and secondary geodesics. Near the crossing point, where the separation between the timelike geodesics is small but their rates of separation can be large, we show that the GGDE holds but the GDE fails to apply. △ Less

Submitted 26 June, 2022; v1 submitted 3 December, 2021; originally announced December 2021.

Comments: 9 pages, 6 figures. Final version published in Classical and Quantum Gravity

Journal ref: Classical and Quantum Gravity, Volume 39, Number 11, 2022

Preliminary investigation into how limb choice affects kinesthetic perception

Authors: Mohit Singhala, Amy Chi, Maria Coleman, Jeremy D. Brown

Abstract: We have a limited understanding of how we integrate haptic information in real-time from our upper limbs to perform complex bimanual tasks, an ability that humans routinely employ to perform tasks of varying levels of difficulty. In order to understand how information from both limbs is used to create a unified percept, it is important to study both the limbs separately first. Prevalent theories h… ▽ More We have a limited understanding of how we integrate haptic information in real-time from our upper limbs to perform complex bimanual tasks, an ability that humans routinely employ to perform tasks of varying levels of difficulty. In order to understand how information from both limbs is used to create a unified percept, it is important to study both the limbs separately first. Prevalent theories highlighting the role of central nervous system (CNS) in accounting for internal body dynamics seem to suggest that both upper limbs should be equally sensitive to external stimuli. However, there is empirical proof demonstrating a perceptual difference in our upper limbs for tasks like shape discrimination, prompting the need to study effects of limb choice on kinesthetic perception. In this manuscript, we start evaluating Just Noticeable Difference (JND) for stiffness for both forearms separately. Early results validate the need for a more thorough investigation of limb choice on kinesthetic perception. △ Less

Submitted 22 July, 2021; originally announced July 2021.

Comments: Accepted as Works-in-Progress paper to World Haptics 2019

Investigating the effects of exploration dynamics on stiffness perception

Authors: Mohit Singhala, Jeremy D. Brown

Abstract: The utility of Human-in-the-loop telerobotic systems (HiLTS) is driven in part by the quality of feedback it can provide to the operator. While the dynamic interaction between robot and environment can often be sensed or modeled, the dynamic coupling of the human-robot interface is often overlooked. Enabling dexterous manipulation through HiLTS however, will require careful consideration of human… ▽ More The utility of Human-in-the-loop telerobotic systems (HiLTS) is driven in part by the quality of feedback it can provide to the operator. While the dynamic interaction between robot and environment can often be sensed or modeled, the dynamic coupling of the human-robot interface is often overlooked. Enabling dexterous manipulation through HiLTS however, will require careful consideration of human haptic perception as it relates to the human's changing limb impedance at the human-robot interface. In this manuscript, we present results from a stiffness perception task run on a simple 1-DoF rotational kinesthetic device at three different angular velocities, based on participant's natural exploration strategy. We evaluated performance effects of exploration velocity as a proxy measurement for limb impedance and the results indicate the need to further investigate how the human body incorporates its knowledge of the body dynamics in kinesthetic perception under active exploration. △ Less

Submitted 22 July, 2021; originally announced July 2021.

Comments: Accepted as Works-in-Progress paper at World Haptics 2019

Towards an understanding of how humans perceive stiffness during bimanual exploration

Authors: Mohit Singhala, Jacob Carducci, Jeremy D. Brown

Abstract: In this paper, an experimental testbed and associated psychophysical paradigm are presented for understanding how people discriminate torsional stiffness using wrist rotation about their forearm. Featured in the testbed are two 1-DoF rotary kinesthetic haptic devices. An adaptive staircase was used to evaluate JNDs for a stiffness discrimination task where participants explored virtual torsion spr… ▽ More In this paper, an experimental testbed and associated psychophysical paradigm are presented for understanding how people discriminate torsional stiffness using wrist rotation about their forearm. Featured in the testbed are two 1-DoF rotary kinesthetic haptic devices. An adaptive staircase was used to evaluate JNDs for a stiffness discrimination task where participants explored virtual torsion springs by rotating their forearms. The JNDs were evaluated across seven different conditions, under four different exploration modes: bimanual, unimanual, bimanual feedback for unimanual displacement, and unimanual feedback for bimanual displacement. The discrimination results will inform future investigation into understanding how stiffness percepts vary. △ Less

Submitted 22 July, 2021; originally announced July 2021.

Comments: Accepted as Works-in-Progress paper at Haptics Symposium 2020

A novel teleoperator testbed to understand the effects of master-slave dynamics on embodiment and kinesthetic perception *

Authors: Mohit Singhala, Jeremy D. Brown

Abstract: With the rising popularity of telerobotic systems, the focus on transparency with regards to haptic perception is also increasing. Transparency, however, represents a theoretical ideal as most bilateral force-reflecting telerobots introduce dynamics (stiffness and dam**) between the operator and the environment. To achieve true dexterity, it will be essential to understand how humans embody the… ▽ More With the rising popularity of telerobotic systems, the focus on transparency with regards to haptic perception is also increasing. Transparency, however, represents a theoretical ideal as most bilateral force-reflecting telerobots introduce dynamics (stiffness and dam**) between the operator and the environment. To achieve true dexterity, it will be essential to understand how humans embody the dynamics of these telerobots and thereby distinguish them from the environment they are exploring. In this short manuscript, we introduce a novel single degree-of-freedom testbed designed to perform psychophysical and task performance assessments of kinesthetic perception during telerobotic exploration. The system is capable of being configured as a rigid mechanical teleoperator, a dynamic mechanical teleoperator, and an electromechanicaal teleoperator. We performed prefatory system identification and found that the system is capable of simulating telerobotic exploration necessary to understand the impact of master-slave dynamics on kinesthetic perception. △ Less

Submitted 22 July, 2021; originally announced July 2021.

Comments: Accepted as Works-in-Progress paper at Haptics Symposium 2020

Towards an Understanding of the Role Operator Limb Dynamics Plays in Haptic Perception of Stiffness

Authors: Mohit Singhala, Jeremy D. Brown

Abstract: Creating haptic interfaces capable of rendering the rich sensation needed for dexterous manipulation is crucial for the advancement of human-in-the-loop telerobotic systems (HiLTS). One limiting factor has been the absence of detailed knowledge of the effect of operator limb dynamics and haptic exploration dynamics on haptic perception. We propose to begin investigations of these effects with sing… ▽ More Creating haptic interfaces capable of rendering the rich sensation needed for dexterous manipulation is crucial for the advancement of human-in-the-loop telerobotic systems (HiLTS). One limiting factor has been the absence of detailed knowledge of the effect of operator limb dynamics and haptic exploration dynamics on haptic perception. We propose to begin investigations of these effects with single-joint haptic exploration and feedback of physical and virtual environments. Here, we present our experimental apparatus, a 1-DoF rotational kinesthetic haptic device and electromyography (EMG) system, along with preliminary findings from our efforts to investigate the change in stiffness discrimination thresholds for differing exploration velocities. Result trends indicate a possible relationship between exploration velocity and discrimination thresholds, as well as a complex interaction between muscle activation, exploration velocity, and haptic feedback. △ Less

Submitted 22 July, 2021; originally announced July 2021.

Comments: Accepted as Works-in-Progress paper in Haptics Symposium 2018

A novel testbed for investigating the impact of teleoperator dynamics on perceived environment dynamics

Authors: Mohit Singhala, Jeremy D. Brown

Abstract: Human-in-the-loop telerobotic systems (HiLTS) are robotic tools designed to extend and in some circumstances improve the dexterous capabilities of the human operator in virtual and remote environments. Dexterous manipulation, however, depends on how well the telerobot is incorporated into the operator's sensorimotor control scheme. Empirical evidence suggests that haptic feedback can lead to impro… ▽ More Human-in-the-loop telerobotic systems (HiLTS) are robotic tools designed to extend and in some circumstances improve the dexterous capabilities of the human operator in virtual and remote environments. Dexterous manipulation, however, depends on how well the telerobot is incorporated into the operator's sensorimotor control scheme. Empirical evidence suggests that haptic feedback can lead to improved dexterity. Unfortunately, haptic feedback can also introduce dynamics between the leader and follower of the telerobot that affect both stability and device performance. While concerted research effort has focused on masking these device dynamics or bypassing them altogether, it is not well understood how human operators incorporate these dynamics into their control scheme. We believe that to advance dexterous telerobotic manipulation, it is crucial to understand the process by which humans operators incorporate teleoperator dynamics and distinguish them from the dynamics of the environment. Key to this knowledge is an understanding of how advanced telerobotic architectures compare to the gold standard, the rigid mechanical teleoperators first introduced in the 1950's. In this manuscript, we present a teleoperator testbed that has reconfigurable transmissions between the leader and follower to change its dynamic behavior. The intent of this testbed is to investigate the effect of the teleoperator's dynamics on perception of and task performance in the remote/virtual environment. We describe the hardware and software components of the testbed and then demonstrate how the different teleoperator transmissions can lead to differences, sometimes significant, in the dynamics that would be felt by the operator when exploring the same environment. △ Less

Submitted 22 July, 2021; originally announced July 2021.

Comments: Accepted to IROS 2021

Sensorimotor-inspired Tactile Feedback and Control Improve Consistency of Prosthesis Manipulation in the Absence of Direct Vision

Authors: Neha Thomas, Farimah Fazlollahi, Jeremy D. Brown, Katherine J. Kuchenbecker

Abstract: The lack of haptically aware upper-limb prostheses forces amputees to rely largely on visual cues to complete activities of daily living. In contrast, able-bodied individuals inherently rely on conscious haptic perception and automatic tactile reflexes to govern volitional actions in situations that do not allow for constant visual attention. We therefore propose a myoelectric prosthesis system th… ▽ More The lack of haptically aware upper-limb prostheses forces amputees to rely largely on visual cues to complete activities of daily living. In contrast, able-bodied individuals inherently rely on conscious haptic perception and automatic tactile reflexes to govern volitional actions in situations that do not allow for constant visual attention. We therefore propose a myoelectric prosthesis system that reflects these concepts to aid manipulation performance without direct vision. To implement this design, we built two fabric-based tactile sensors that measure contact location along the palmar and dorsal sides of the prosthetic fingers and grasp pressure at the tip of the prosthetic thumb. Inspired by the natural sensorimotor system, we use the measurements from these sensors to provide vibrotactile feedback of contact location and implement a tactile grasp controller that uses automatic reflexes to prevent over-gras** and object slip. We compare this system to a standard myoelectric prosthesis in a challenging reach-to-pick-and-place task conducted without direct vision; 17 able-bodied adults took part in this single-session between-subjects study. Participants in the tactile group achieved more consistent high performance compared to participants in the standard group. These results indicate that the addition of contact-location feedback and reflex control increases the consistency with which objects can be grasped and moved without direct vision in upper-limb prosthetics. △ Less

Submitted 14 July, 2021; originally announced July 2021.

Comments: Accepted to IROS 2021

Overhaul and Installation of the ICARUS-T600 Liquid Argon TPC Electronics for the FNAL Short Baseline Neutrino Program

Authors: L. Bagby, B. Baibussinov, B. Behera, V. Bellini, R. Benocci, M. Betancourt, M. Bettini, M. Bonesini, T. Boone, A. Braggiotti, J. D. Brown, H. Budd, F. Calaon, L. Castellani, S. Centro, A. G. Cocco, M. Convery, F. Fabris, A. Falcone, C. Farnese, A. Fava, F. Fichera, M. Giarin, D. Gibin, A. Guglielmi , et al. (39 additional authors not shown)

Abstract: The ICARUS T600 liquid argon (LAr) time projection chamber (TPC) underwent a major overhaul at CERN in 2016-2017 to prepare for the operation at FNAL in the Short Baseline Neutrino (SBN) program. This included a major upgrade of the photo-multiplier system and of the TPC wire read-out electronics. The full TPC wire read-out electronics together with the new wire biasing and interconnection scheme… ▽ More The ICARUS T600 liquid argon (LAr) time projection chamber (TPC) underwent a major overhaul at CERN in 2016-2017 to prepare for the operation at FNAL in the Short Baseline Neutrino (SBN) program. This included a major upgrade of the photo-multiplier system and of the TPC wire read-out electronics. The full TPC wire read-out electronics together with the new wire biasing and interconnection scheme are described. The design of a new signal feed-through flange is also a fundamental piece of this overhaul whose major feature is the integration of all electronics components onto the signal flange. Initial functionality tests of the full TPC electronics chain installed in the T600 detector at FNAL are also described. △ Less

Submitted 25 November, 2020; v1 submitted 5 October, 2020; originally announced October 2020.

Report number: FERMILAB-PUB-20-504-ND

Elasticity Theory in General Relativity

Authors: J. David Brown

Abstract: The general relativistic theory of elasticity is reviewed from a Lagrangian, as opposed to Eulerian, perspective. The equations of motion and stress-energy-momentum tensor for a hyperelastic body are derived from the gauge-invariant action principle first considered by DeWitt. This action is a natural extension of the action for a single relativistic particle. The central object in the Lagrangian… ▽ More The general relativistic theory of elasticity is reviewed from a Lagrangian, as opposed to Eulerian, perspective. The equations of motion and stress-energy-momentum tensor for a hyperelastic body are derived from the gauge-invariant action principle first considered by DeWitt. This action is a natural extension of the action for a single relativistic particle. The central object in the Lagrangian treatment is the Landau-Lifshitz radar metric, which is the relativistic version of the right Cauchy-Green deformation tensor. We also introduce relativistic definitions of the deformation gradient, Green strain, and first and second Piola-Kirchhoff stress tensors. A gauge-fixed description of relativistic hyperelasticity is also presented, and the nonrelativistic theory is derived in the limit as the speed of light becomes infinite. △ Less

Submitted 2 February, 2021; v1 submitted 7 April, 2020; originally announced April 2020.

Comments: 12 pages, 2 figures, to be published in Classical and Quantum Gravity

Continuous body dynamics and the Mathisson-Papapetrou-Dixon equations

Authors: S. P. Loomis, J. David Brown

Abstract: We show that an effective particle Lagrangian yields the Mathisson-Papapetrou-Dixon (MPD) equations. The spin of the effective particle is defined without any reference to a fixed body frame or angular velocity variable. We then demonstrate that a continuous body, defined by a congruence of world lines and described by a general action, can be rewritten as an effective particle. We analyze the gau… ▽ More We show that an effective particle Lagrangian yields the Mathisson-Papapetrou-Dixon (MPD) equations. The spin of the effective particle is defined without any reference to a fixed body frame or angular velocity variable. We then demonstrate that a continuous body, defined by a congruence of world lines and described by a general action, can be rewritten as an effective particle. We analyze the gauge freedom of the body and show that a natural center of mass condition is related to a spin supplementary condition. △ Less

Submitted 6 January, 2017; originally announced January 2017.

Numerical simulations with a first order BSSN formulation of Einstein's field equations

Authors: J. David Brown, Peter Diener, Scott E. Field, Jan S. Hesthaven, Frank Herrmann, Abdul H. Mroué, Olivier Sarbach, Erik Schnetter, Manuel Tiglio, Michael Wagman

Abstract: We present a new fully first order strongly hyperbolic representation of the BSSN formulation of Einstein's equations with optional constraint dam** terms. We describe the characteristic fields of the system, discuss its hyperbolicity properties, and present two numerical implementations and simulations: one using finite differences, adaptive mesh refinement and in particular binary black holes,… ▽ More We present a new fully first order strongly hyperbolic representation of the BSSN formulation of Einstein's equations with optional constraint dam** terms. We describe the characteristic fields of the system, discuss its hyperbolicity properties, and present two numerical implementations and simulations: one using finite differences, adaptive mesh refinement and in particular binary black holes, and another one using the discontinuous Galerkin method in spherical symmetry. The results of this paper constitute a first step in an effort to combine the robustness of BSSN evolutions with very high accuracy numerical techniques, such as spectral collocation multi-domain or discontinuous Galerkin methods. △ Less

Submitted 6 February, 2012; v1 submitted 5 February, 2012; originally announced February 2012.

Comments: To appear in Physical Review D

Generalized Harmonic Equations in 3+1 Form

Authors: J. David Brown

Abstract: The generalized harmonic equations of general relativity are written in 3+1 form. The result is a system of partial differential equations with first order time and second order space derivatives for the spatial metric, extrinsic curvature, lapse function and shift vector, plus fields that represent the time derivatives of the lapse and shift. This allows for a direct comparison between the genera… ▽ More The generalized harmonic equations of general relativity are written in 3+1 form. The result is a system of partial differential equations with first order time and second order space derivatives for the spatial metric, extrinsic curvature, lapse function and shift vector, plus fields that represent the time derivatives of the lapse and shift. This allows for a direct comparison between the generalized harmonic and the Arnowitt-Deser-Misner formulations. The 3+1 generalized harmonic equations are also written in terms of conformal variables and compared to the Baumgarte-Shapiro-Shibata-Nakamura equations with moving puncture gauge conditions. △ Less

Submitted 29 November, 2011; v1 submitted 8 September, 2011; originally announced September 2011.

Comments: This version (accepted for publication) contains some minor corrections and additional references

Oppenheimer-Snyder Collapse in Moving-Puncture Coordinates

Authors: Alexa N. Staley, Thomas W. Baumgarte, J. David Brown, Brian Farris, Stuart L. Shapiro

Abstract: Moving-puncture coordinates are commonly used in numerical simulations of black holes. Their properties for vacuum Schwarzschild black holes have been analyzed in a number of studies. The behavior of moving-puncture coordinates in spacetimes containing matter, however, is less well understood. In this paper we explore the behavior of these coordinates for Oppenheimer-Snyder collapse, i.e., the col… ▽ More Moving-puncture coordinates are commonly used in numerical simulations of black holes. Their properties for vacuum Schwarzschild black holes have been analyzed in a number of studies. The behavior of moving-puncture coordinates in spacetimes containing matter, however, is less well understood. In this paper we explore the behavior of these coordinates for Oppenheimer-Snyder collapse, i.e., the collapse of a uniform density, pressureless sphere of dust initially at rest to a black hole. Oppenheimer-Snyder collapse provides a stringent test of the singularity-avoiding properties of moving-puncture coordinates, since the singularity can form more quickly than it would for matter with pressure. Our results include analytical expressions for the matter density, lapse function, and mean curvature at early times, as well as interesting limits for later times. We also carry out numerical simulations to obtain the full solution and these show that, even in the absence of pressure, moving-puncture coordinates are able to avoid the singularity. At late times the geometry settles down to a trumpet slice of a vacuum black hole. △ Less

Submitted 2 September, 2011; originally announced September 2011.

Comments: 20 pages, 9 figures

Energy Efficiency and Reliability in Wireless Biomedical Implant Systems

Authors: Jamshid Abouei, J. David Brown, Konstantinos N. Plataniotis, Subbarayan Pasupathy

Abstract: The use of wireless implant technology requires correct delivery of the vital physiological signs of the patient along with the energy management in power-constrained devices. Toward these goals, we present an augmentation protocol for the physical layer of the Medical Implant Communications Service (MICS) with focus on the energy efficiency of deployed devices over the MICS frequency band. The pr… ▽ More The use of wireless implant technology requires correct delivery of the vital physiological signs of the patient along with the energy management in power-constrained devices. Toward these goals, we present an augmentation protocol for the physical layer of the Medical Implant Communications Service (MICS) with focus on the energy efficiency of deployed devices over the MICS frequency band. The present protocol uses the rateless code with the Frequency Shift Keying (FSK) modulation scheme to overcome the reliability and power cost concerns in tiny implantable sensors due to the considerable attenuation of propagated signals across the human body. In addition, the protocol allows a fast start-up time for the transceiver circuitry. The main advantage of using rateless codes is to provide an inherent adaptive duty-cycling for power management, due to the flexibility of the rateless code rate. Analytical results demonstrate that an 80% energy saving is achievable with the proposed protocol when compared to the IEEE 802.15.4 physical layer standard with the same structure used for wireless sensor networks. Numerical results show that the optimized rateless coded FSK is more energy efficient than that of the uncoded FSK scheme for deep tissue (e.g., digestive endoscopy) applications, where the optimization is performed over modulation and coding parameters. △ Less

Submitted 5 January, 2011; originally announced January 2011.

Comments: 12 Pages, The paper has been accepted for publication in IEEE Transaction on Information Technology in Biomedicine, 2011

On the Energy Efficiency of LT Codes in Proactive Wireless Sensor Networks

Authors: Jamshid Abouei, J. David Brown, Konstantinos N. Plataniotis, Subbarayan Pasupathy

Abstract: This paper presents an in-depth analysis on the energy efficiency of Luby Transform (LT) codes with Frequency Shift Keying (FSK) modulation in a Wireless Sensor Network (WSN) over Rayleigh fading channels with pathloss. We describe a proactive system model according to a flexible duty-cycling mechanism utilized in practical sensor apparatus. The present analysis is based on realistic parameters in… ▽ More This paper presents an in-depth analysis on the energy efficiency of Luby Transform (LT) codes with Frequency Shift Keying (FSK) modulation in a Wireless Sensor Network (WSN) over Rayleigh fading channels with pathloss. We describe a proactive system model according to a flexible duty-cycling mechanism utilized in practical sensor apparatus. The present analysis is based on realistic parameters including the effect of channel bandwidth used in the IEEE 802.15.4 standard, active mode duration and computation energy. A comprehensive analysis, supported by some simulation studies on the probability mass function of the LT code rate and coding gain, shows that among uncoded FSK and various classical channel coding schemes, the optimized LT coded FSK is the most energy-efficient scheme for distance d greater than the pre-determined threshold level d_T , where the optimization is performed over coding and modulation parameters. In addition, although the optimized uncoded FSK outperforms coded schemes for d < d_T , the energy gap between LT coded and uncoded FSK is negligible for d < d_T compared to the other coded schemes. These results come from the flexibility of the LT code to adjust its rate to suit instantaneous channel conditions, and suggest that LT codes are beneficial in practical low-power WSNs with dynamic position sensor nodes. △ Less

Submitted 13 November, 2010; originally announced November 2010.

Comments: accepted for publication in IEEE Transactions on Signal Processing

Report number: November 9, 2010

Trumpet slices of the Schwarzschild-Tangherlini spacetime

Authors: Kenneth A. Dennison, John P. Wendell, Thomas W. Baumgarte, J. David Brown

Abstract: We study families of time-independent maximal and 1+log foliations of the Schwarzschild-Tangherlini spacetime, the spherically-symmetric vacuum black hole solution in D spacetime dimensions, for D >= 4. We identify special members of these families for which the spatial slices display a trumpet geometry. Using a generalization of the 1+log slicing condition that is parametrized by a constant n we… ▽ More We study families of time-independent maximal and 1+log foliations of the Schwarzschild-Tangherlini spacetime, the spherically-symmetric vacuum black hole solution in D spacetime dimensions, for D >= 4. We identify special members of these families for which the spatial slices display a trumpet geometry. Using a generalization of the 1+log slicing condition that is parametrized by a constant n we recover the results of Nakao, Abe, Yoshino and Shibata in the limit of maximal slicing. We also construct a numerical code that evolves the BSSN equations for D=5 in spherical symmetry using moving-puncture coordinates, and demonstrate that these simulations settle down to the trumpet solutions. △ Less

Submitted 27 October, 2010; originally announced October 2010.

Comments: 11 pages, 6 figures, submitted to PRD

Journal ref: Phys.Rev.D82:124057,2010

Action Principle for the Generalized Harmonic Formulation of General Relativity

Authors: J. David Brown

Abstract: An action principle for the generalized harmonic formulation of general relativity is presented. The action is a functional of the spacetime metric and the gauge source vector. An action principle for the Z4 formulation of general relativity has been proposed recently by Bona, Bona--Casas and Palenzuela (BBP). The relationship between the generalized harmonic action and the BBP action is discussed… ▽ More An action principle for the generalized harmonic formulation of general relativity is presented. The action is a functional of the spacetime metric and the gauge source vector. An action principle for the Z4 formulation of general relativity has been proposed recently by Bona, Bona--Casas and Palenzuela (BBP). The relationship between the generalized harmonic action and the BBP action is discussed in detail. △ Less

Submitted 7 September, 2011; v1 submitted 18 August, 2010; originally announced August 2010.

Comments: This version is contains more thorough presentations and discussions of the key results. To be published in PRD. (8 pages, no figures)

Adaptive Demodulation in Differentially Coherent Phase Systems: Design and Performance Analysis

Authors: J. David Brown, Jamshid Abouei, Konstantinos N. Plataniotis, Subbarayan Pasupathy

Abstract: Adaptive Demodulation (ADM) is a newly proposed rate-adaptive system which operates without requiring Channel State Information (CSI) at the transmitter (unlike adaptive modulation) by using adaptive decision region boundaries at the receiver and encoding the data with a rateless code. This paper addresses the design and performance of an ADM scheme for two common differentially coherent schemes:… ▽ More Adaptive Demodulation (ADM) is a newly proposed rate-adaptive system which operates without requiring Channel State Information (CSI) at the transmitter (unlike adaptive modulation) by using adaptive decision region boundaries at the receiver and encoding the data with a rateless code. This paper addresses the design and performance of an ADM scheme for two common differentially coherent schemes: M-DPSK (M-ary Differential Phase Shift Keying) and M-DAPSK (M-ary Differential Amplitude and Phase Shift Keying) operating over AWGN and Rayleigh fading channels. The optimal method for determining the most reliable bits for a given differential detection scheme is presented. In addition, simple (near-optimal) implementations are provided for recovering the most reliable bits from a received pair of differentially encoded symbols for systems using 16-DPSK and 16- DAPSK. The new receivers offer the advantages of a rate-adaptive system, without requiring CSI at the transmitter and a coherent phase reference at the receiver. Bit error analysis for the ADM system in both cases is presented along with numerical results of the spectral efficiency for the rate-adaptive systems operating over a Rayleigh fading channel. △ Less

Submitted 2 June, 2010; originally announced June 2010.

Comments: 25 pages, 11 Figures, submitted to IEEE Transactions on Communications, June 1, 2010

On the Energy Efficiency of LT Codes in Proactive Wireless Sensor Networks

Authors: Jamshid Abouei, J. David Brown, Konstantinos N. Plataniotis, Subbarayan Pasupathy

Abstract: This paper presents the first in-depth analysis on the energy efficiency of LT codes with Non Coherent M-ary Frequency Shift Keying (NC-MFSK), known as green modulation [1], in a proactive Wireless Sensor Network (WSN) over Rayleigh flat-fading channels with path-loss. We describe the proactive system model according to a pre-determined time-based process utilized in practical sensor nodes. The… ▽ More This paper presents the first in-depth analysis on the energy efficiency of LT codes with Non Coherent M-ary Frequency Shift Keying (NC-MFSK), known as green modulation [1], in a proactive Wireless Sensor Network (WSN) over Rayleigh flat-fading channels with path-loss. We describe the proactive system model according to a pre-determined time-based process utilized in practical sensor nodes. The present analysis is based on realistic parameters including the effect of channel bandwidth used in the IEEE 802.15.4 standard, and the active mode duration. A comprehensive analysis, supported by some simulation studies on the probability mass function of the LT code rate and coding gain, shows that among uncoded NC-MFSK and various classical channel coding schemes, the optimized LT coded NC-MFSK is the most energy-efficient scheme for distance $d$ greater than the pre-determined threshold level $d_T$, where the optimization is performed over coding and modulation parameters. In addition, although uncoded NC-MFSK outperforms coded schemes for $d < d_T$, the energy gap between LT coded and uncoded NC-MFSK is negligible for $d < d_T$ compared to the other coded schemes. These results come from the flexibility of the LT code to adjust its rate to suit instantaneous channel conditions, and suggest that LT codes are beneficial in practical low-power WSNs with dynamic position sensor nodes. △ Less

Submitted 3 December, 2009; originally announced December 2009.

Comments: submitted to IEEE Transactions on Wireless Communications (25 pages)

n-symplectic quantization on LRn

Authors: L. K. Norris, Jonathan D. Brown

Abstract: n-symplectic geometry, a generalization of symplectic geometry on the cotangent bundle of a manifold M, is formulated on the bundle of linear frames LM using the Rn-valued soldering 1-form as the generalized n-symplectic potential. In this paper we use n-symplectic geometry on LRn to formulate a quantization scheme for a single particle moving in Rn. By retaining the essence of the standard axio… ▽ More n-symplectic geometry, a generalization of symplectic geometry on the cotangent bundle of a manifold M, is formulated on the bundle of linear frames LM using the Rn-valued soldering 1-form as the generalized n-symplectic potential. In this paper we use n-symplectic geometry on LRn to formulate a quantization scheme for a single particle moving in Rn. By retaining the essence of the standard axioms for quantization on T*Rn, but adapting them to LR^n, we show it is possible to construct a full polynomial quantization that is consistent with the Schrödinger representation on a 2n-dimensional subbundle of LRn. △ Less

Submitted 2 November, 2009; originally announced November 2009.

MSC Class: 81S99; 53D99

Probing the puncture for black hole simulations

Authors: J. David Brown

Abstract: With the puncture method for black hole simulations, the second infinity of a wormhole geometry is compactified to a single "puncture point" on the computational grid. The region surrounding the puncture quickly evolves to a trumpet geometry. The computational grid covers only a portion of the trumpet throat. It ends at a boundary whose location depends on resolution. This raises the possibility… ▽ More With the puncture method for black hole simulations, the second infinity of a wormhole geometry is compactified to a single "puncture point" on the computational grid. The region surrounding the puncture quickly evolves to a trumpet geometry. The computational grid covers only a portion of the trumpet throat. It ends at a boundary whose location depends on resolution. This raises the possibility that perturbations in the trumpet geometry could propagate down the trumpet throat, reflect from the puncture boundary, and return to the black hole exterior with a resolution--dependent time delay. Such pathological behavior is not observed. This is explained by the observation that some perturbative modes propagate in the conformal geometry, others propagate in the physical geometry. The puncture boundary exists only in the physical geometry. The modes that propagate in the physical geometry are always directed away from the computational domain at the puncture boundary. The finite difference stencils ensure that these modes are advected through the boundary with no coupling to the modes that propagate in the conformal geometry. These results are supported by numerical experiments with a code that evolves spherically symmetric gravitational fields with standard Cartesian finite difference stencils. The code uses the Baumgarte--Shapiro--Shibata--Nakamura formulation of Einstein's equations with 1+log slicing and gamma--driver shift conditions. △ Less

Submitted 23 October, 2009; v1 submitted 26 August, 2009; originally announced August 2009.

Comments: Minor typos corrected and references updated. To be published in PRD

Journal ref: Phys.Rev.D80:084042,2009

Covariant formulations of BSSN and the standard gauge

Authors: J. David Brown

Abstract: The BSSN and standard gauge equations are written in covariant form with respect to spatial coordinate transformations. The BSSN variables are defined as tensors with no density weights. This allows us to evolve a given set of initial data using two different coordinate systems and to relate the results using the familiar tensor transformation rules. Two variants of the covariant equations are c… ▽ More The BSSN and standard gauge equations are written in covariant form with respect to spatial coordinate transformations. The BSSN variables are defined as tensors with no density weights. This allows us to evolve a given set of initial data using two different coordinate systems and to relate the results using the familiar tensor transformation rules. Two variants of the covariant equations are considered. These differ from one another in the way that the determinant of the conformal metric is evolved. △ Less

Submitted 22 May, 2009; v1 submitted 20 February, 2009; originally announced February 2009.

Comments: 6 pages, no figures. Notation has been improved and typos have been corrected

Journal ref: Phys.Rev.D79:104029,2009

Strongly Hyperbolic Extensions of the ADM Hamiltonian

Authors: J. David Brown

Abstract: The ADM Hamiltonian formulation of general relativity with prescribed lapse and shift is a weakly hyperbolic system of partial differential equations. In general weakly hyperbolic systems are not mathematically well posed. For well posedness, the theory should be reformulated so that the complete system, evolution equations plus gauge conditions, is (at least) strongly hyperbolic. Traditionally,… ▽ More The ADM Hamiltonian formulation of general relativity with prescribed lapse and shift is a weakly hyperbolic system of partial differential equations. In general weakly hyperbolic systems are not mathematically well posed. For well posedness, the theory should be reformulated so that the complete system, evolution equations plus gauge conditions, is (at least) strongly hyperbolic. Traditionally, reformulation has been carried out at the level of equations of motion. This typically destroys the variational and Hamiltonian structures of the theory. Here I show that one can extend the ADM formalism to (i) incorporate the gauge conditions as dynamical equations and (ii) affect the hyperbolicity of the complete system, all while maintaining a Hamiltonian description. The extended ADM formulation is used to obtain a strongly hyperbolic Hamiltonian description of Einstein's theory that is generally covariant under spatial diffeomorphisms and time reparametrizations, and has physical characteristics. The extended Hamiltonian formulation with 1+log slicing and gamma--driver shift conditions is weakly hyperbolic. △ Less

Submitted 10 July, 2008; v1 submitted 3 March, 2008; originally announced March 2008.

Comments: This version contains minor corrections and clarifications. The format has been changed to conform with IOP style

Puncture Evolution of Schwarzschild Black Holes

Authors: J. David Brown

Abstract: The moving puncture method is analyzed for a single, non-spinning black hole. It is shown that the puncture region is not resolved by current numerical codes. As a result, the geometry near the puncture appears to evolve to an infinitely long cylinder of finite areal radius. The puncture itself actually remains at spacelike infinity throughout the evolution. In the limit of infinite resolution t… ▽ More The moving puncture method is analyzed for a single, non-spinning black hole. It is shown that the puncture region is not resolved by current numerical codes. As a result, the geometry near the puncture appears to evolve to an infinitely long cylinder of finite areal radius. The puncture itself actually remains at spacelike infinity throughout the evolution. In the limit of infinite resolution the data never become stationary. However, at any reasonable finite resolution the grid points closest to the puncture are rapidly drawn into the black hole interior by the Gamma-driver shift condition. The data can then evolve to a stationary state. These results suggest that the moving puncture technique should be viewed as a type of "natural excision". △ Less

Submitted 15 January, 2008; v1 submitted 9 May, 2007; originally announced May 2007.

Comments: This is the final version to be published in PRD. One important change: the phrase "excision by under resolution" is replaced by the more appropriate phrase "natural excision"

Journal ref: Phys.Rev.D77:044018,2008

Modifying the Einstein Equations off the Constraint Hypersuface

Authors: J. David Brown, Lisa L. Lowe

Abstract: A new technique is presented for modifying the Einstein evolution equations off the constraint hypersurface. With this approach the evolution equations for the constraints can be specified freely. The equations of motion for the gravitational field variables are modified by the addition of terms that are linear and nonlocal in the constraints. These terms are obtained from solutions of the linea… ▽ More A new technique is presented for modifying the Einstein evolution equations off the constraint hypersurface. With this approach the evolution equations for the constraints can be specified freely. The equations of motion for the gravitational field variables are modified by the addition of terms that are linear and nonlocal in the constraints. These terms are obtained from solutions of the linearized Einstein constraints. △ Less

Submitted 2 June, 2006; originally announced June 2006.

Comments: 4 pages, 1 figure, uses REVTeX

Journal ref: Phys.Rev. D74 (2006) 104023

Multigrid elliptic equation solver with adaptive mesh refinement

Authors: J. David Brown, Lisa L. Lowe

Abstract: In this paper we describe in detail the computational algorithm used by our parallel multigrid elliptic equation solver with adaptive mesh refinement. Our code uses truncation error estimates to adaptively refine the grid as part of the solution process. The presentation includes a discussion of the orders of accuracy that we use for prolongation and restriction operators to ensure second order… ▽ More In this paper we describe in detail the computational algorithm used by our parallel multigrid elliptic equation solver with adaptive mesh refinement. Our code uses truncation error estimates to adaptively refine the grid as part of the solution process. The presentation includes a discussion of the orders of accuracy that we use for prolongation and restriction operators to ensure second order accurate results and to minimize computational work. Code tests are presented that confirm the overall second order accuracy and demonstrate the savings in computational resources provided by adaptive mesh refinement. △ Less

Submitted 22 March, 2005; v1 submitted 23 November, 2004; originally announced November 2004.

Comments: 12 pages, 9 figures, Modified in response to reviewer suggestions, added figure, added references. Accepted for publication in J. Comp. Phys

Journal ref: J.Comput.Phys. 209 (2005) 582-598

Distorted Black Hole Initial Data Using the Puncture Method

Authors: J. David Brown, Lisa L. Lowe

Abstract: We solve for single distorted black hole initial data using the puncture method, where the Hamiltonian constraint is written as an elliptic equation in R^3 for the nonsingular part of the metric conformal factor. With this approach we can generate isometric and non--isometric black hole data. For the isometric case, our data are directly comparable to those obtained by Bernstein et al., who impo… ▽ More We solve for single distorted black hole initial data using the puncture method, where the Hamiltonian constraint is written as an elliptic equation in R^3 for the nonsingular part of the metric conformal factor. With this approach we can generate isometric and non--isometric black hole data. For the isometric case, our data are directly comparable to those obtained by Bernstein et al., who impose isometry boundary conditions at the black hole throat. Our numerical simulations are performed using a parallel multigrid elliptic equation solver with adaptive mesh refinement. Mesh refinement allows us to use high resolution around the black hole while kee** the grid boundaries far away in the asymptotic region. △ Less

Submitted 1 December, 2004; v1 submitted 27 August, 2004; originally announced August 2004.

Comments: This is the final version to be published in Phys. Rev. D. It includes minor revisions and some additional tests

Journal ref: Phys.Rev. D70 (2004) 124014

Evolving a puncture black hole with fixed mesh refinement

Authors: Breno Imbiriba, John Baker, Dae-Il Choi, Joan Centrella, David R. Fiske, J. David Brown, James R. van Meter, Kevin Olson

Abstract: We present an algorithm for treating mesh refinement interfaces in numerical relativity. We detail the behavior of the solution near such interfaces located in the strong field regions of dynamical black hole spacetimes, with particular attention to the convergence properties of the simulations. In our applications of this technique to the evolution of puncture initial data with vanishing shift,… ▽ More We present an algorithm for treating mesh refinement interfaces in numerical relativity. We detail the behavior of the solution near such interfaces located in the strong field regions of dynamical black hole spacetimes, with particular attention to the convergence properties of the simulations. In our applications of this technique to the evolution of puncture initial data with vanishing shift, we demonstrate that it is possible to simultaneously maintain second order convergence near the puncture and extend the outer boundary beyond 100M, thereby approaching the asymptotically flat region in which boundary condition problems are less difficult and wave extraction is meaningful. △ Less

Submitted 3 February, 2006; v1 submitted 11 March, 2004; originally announced March 2004.

Comments: 18 pages, 12 figures. Minor changes, final PRD version

Journal ref: Phys.Rev. D70 (2004) 124025

Interface Conditions for Wave Propagation Through Mesh Refinement Boundaries

Authors: Dae-Il Choi, J. David Brown, Breno Imbiriba, Joan Centrella, Peter MacNeice

Abstract: We study the propagation of waves across fixed mesh refinement boundaries in linear and nonlinear model equations in 1--D and 2--D, and in the 3--D Einstein equations of general relativity. We demonstrate that using linear interpolation to set the data in guard cells leads to the production of reflected waves at the refinement boundaries. Implementing quadratic interpolation to fill the guard ce… ▽ More We study the propagation of waves across fixed mesh refinement boundaries in linear and nonlinear model equations in 1--D and 2--D, and in the 3--D Einstein equations of general relativity. We demonstrate that using linear interpolation to set the data in guard cells leads to the production of reflected waves at the refinement boundaries. Implementing quadratic interpolation to fill the guard cells suppresses these spurious signals. △ Less

Submitted 4 July, 2003; originally announced July 2003.

Comments: 46 pages, 18 figures, Submitted to Journal of Computational Physics

Journal ref: J.Comput.Phys. 193 (2004) 398-425

Action and Energy of the Gravitational Field

Authors: J. D. Brown, S. R. Lau, J. W. York

Abstract: We present a detailed examination of the variational principle for metric general relativity as applied to a ``quasilocal'' spacetime region $\M$ (that is, a region that is both spatially and temporally bounded). Our analysis relies on the Hamiltonian formulation of general relativity, and thereby assumes a foliation of $\M$ into spacelike hypersurfaces $Σ$. We allow for near complete generality… ▽ More We present a detailed examination of the variational principle for metric general relativity as applied to a ``quasilocal'' spacetime region $\M$ (that is, a region that is both spatially and temporally bounded). Our analysis relies on the Hamiltonian formulation of general relativity, and thereby assumes a foliation of $\M$ into spacelike hypersurfaces $Σ$. We allow for near complete generality in the choice of foliation. Using a field--theoretic generalization of Hamilton--Jacobi theory, we define the quasilocal stress-energy-momentum of the gravitational field by varying the action with respect to the metric on the boundary $\partial\M$. The gravitational stress-energy-momentum is defined for a two--surface $B$ spanned by a spacelike hypersurface in spacetime. We examine the behavior of the gravitational stress-energy-momentum under boosts of the spanning hypersurface. The boost relations are derived from the geometrical and invariance properties of the gravitational action and Hamiltonian. Finally, we present several new examples of quasilocal energy--momentum, including a novel discussion of quasilocal energy--momentum in the large-sphere limit towards spatial infinity. △ Less

Submitted 15 April, 2002; v1 submitted 6 October, 2000; originally announced October 2000.

Comments: To be published in Annals of Physics. This final version includes two new sections, one giving examples of quasilocal energy and the other containing a discussion of energy at spatial infinity. References have been added to papers by Bose and Dadhich, Anco and Tung

Dynamical Rotational Instability at Low $T/W$

Authors: Joan M. Centrella, Kimberly C. B. New, Lisa L. Lowe, J. David Brown

Abstract: Dynamical instability is shown to occur in differentially rotating polytropes with N = 3.33 and $T/|W| \gtrsim 0.14$. This instability has a strong m=1 mode, although the m=2, 3, and 4 modes also appear. Such instability may allow a centrifugally-hung core to begin collapsing to neutron star densities on a dynamical timescale. The gravitational radiation emitted by such unstable cores may be det… ▽ More Dynamical instability is shown to occur in differentially rotating polytropes with N = 3.33 and $T/|W| \gtrsim 0.14$. This instability has a strong m=1 mode, although the m=2, 3, and 4 modes also appear. Such instability may allow a centrifugally-hung core to begin collapsing to neutron star densities on a dynamical timescale. The gravitational radiation emitted by such unstable cores may be detectable with advanced ground-based detectors, such as LIGO II. If the instability occurs in a supermassive star, it may produce gravitational radiation detectable by the space-based detector LISA. △ Less

Submitted 27 October, 2000; originally announced October 2000.

Comments: 5 pages, 4 figures; submitted to The Astrophysical Journal Letters

Report number: LA-UR-00-5088

Journal ref: Astrophys.J. 550 (2001) L193-L196

Canonical Quasilocal Energy and Small Spheres

Authors: J. D. Brown, S. R. Lau, J. W. York

Abstract: Consider the definition E of quasilocal energy stemming from the Hamilton-Jacobi method as applied to the canonical form of the gravitational action. We examine E in the standard "small-sphere limit," first considered by Horowitz and Schmidt in their examination of Hawking's quasilocal mass. By the term "small sphere" we mean a cut S(r), level in an affine radius r, of the lightcone belonging to… ▽ More Consider the definition E of quasilocal energy stemming from the Hamilton-Jacobi method as applied to the canonical form of the gravitational action. We examine E in the standard "small-sphere limit," first considered by Horowitz and Schmidt in their examination of Hawking's quasilocal mass. By the term "small sphere" we mean a cut S(r), level in an affine radius r, of the lightcone belonging to a generic spacetime point. As a power series in r, we compute the energy E of the gravitational and matter fields on a spacelike hypersurface spanning S(r). Much of our analysis concerns conceptual and technical issues associated with assigning the zero-point of the energy. For the small-sphere limit, we argue that the correct zero-point is obtained via a "lightcone reference," which stems from a certain isometric embedding of S(r) into a genuine lightcone of Minkowski spacetime. Choosing this zero-point, we find agreement with Hawking's quasilocal mass expression, up to and including the first non-trivial order in the affine radius. The vacuum limit relates the quasilocal energy directly to the Bel-Robinson tensor. △ Less

Submitted 1 October, 1998; originally announced October 1998.

Comments: revtex, 22 p, uses amssymb option (can be removed)

Journal ref: Phys. Rev. D 59, 064028 (1999)

Energy of Isolated Systems at Retarded Times as the Null Limit of Quasilocal Energy

Authors: J. D. Brown, S. R. Lau, J. W. York, Jr

Abstract: We define the energy of a perfectly isolated system at a given retarded time as the suitable null limit of the quasilocal energy $E$. The result coincides with the Bondi-Sachs mass. Our $E$ is the lapse-unity shift-zero boundary value of the gravitational Hamiltonian appropriate for the partial system $Σ$ contained within a finite topologically spherical boundary $B = \partial Σ$. Moreover, we s… ▽ More We define the energy of a perfectly isolated system at a given retarded time as the suitable null limit of the quasilocal energy $E$. The result coincides with the Bondi-Sachs mass. Our $E$ is the lapse-unity shift-zero boundary value of the gravitational Hamiltonian appropriate for the partial system $Σ$ contained within a finite topologically spherical boundary $B = \partial Σ$. Moreover, we show that with an arbitrary lapse and zero shift the same null limit of the Hamiltonian defines a physically meaningful element in the space dual to supertranslations. This result is specialized to yield an expression for the full Bondi-Sachs four-momentum in terms of Hamiltonian values. △ Less

Submitted 24 September, 1996; originally announced September 1996.

Comments: REVTEX, 16 pages, 1 figure

Report number: NCSU/CTMP/013; TUW-10-96; IFP-730-UNC and TAR-054-UNC

Journal ref: Phys. Rev. D 55, 1977 (1997)

On Relativistic Material Reference Systems

Authors: J. David Brown, Donald Marolf

Abstract: This work closes certain gaps in the literature on material reference systems in general relativity. It is shown that perfect fluids are a special case of DeWitt's relativistic elastic media and that the velocity--potential formalism for perfect fluids can be interpreted as describing a perfect fluid coupled to a fleet of clocks. A Hamiltonian analysis of the elastic media with clocks is carried… ▽ More This work closes certain gaps in the literature on material reference systems in general relativity. It is shown that perfect fluids are a special case of DeWitt's relativistic elastic media and that the velocity--potential formalism for perfect fluids can be interpreted as describing a perfect fluid coupled to a fleet of clocks. A Hamiltonian analysis of the elastic media with clocks is carried out and the constraints that arise when the system is coupled to gravity are studied. When the Hamiltonian constraint is resolved with respect to the clock momentum, the resulting true Hamiltonian is found to be a functional only of the gravitational variables. The true Hamiltonian is explicitly displayed when the medium is dust, and is shown to depend on the detailed construction of the clocks. △ Less

Submitted 14 September, 1995; originally announced September 1995.

Comments: 18 pages, ReVTeX

Report number: UCSBTH-95-26, CTMP/012/NCSU

Journal ref: Phys.Rev. D53 (1996) 1835-1844

Black Hole Pair Creation and the Entropy Factor

Authors: J. David Brown

Abstract: It is shown that in the instanton approximation the rate of creation of black holes is always enhanced by a factor of the exponential of the black hole entropy relative to the rate of creation of compact matter distributions (stars). This result holds for any generally covariant theory of gravitational and matter fields that can be expressed in Hamiltonian form. It generalizes the result obtaine… ▽ More It is shown that in the instanton approximation the rate of creation of black holes is always enhanced by a factor of the exponential of the black hole entropy relative to the rate of creation of compact matter distributions (stars). This result holds for any generally covariant theory of gravitational and matter fields that can be expressed in Hamiltonian form. It generalizes the result obtained previously for the pair creation of magnetically charged black holes by a magnetic field in Einstein--Maxwell theory. The particular example of pair creation of electrically charged black holes by an electric field in Einstein--Maxwell theory is discussed in detail. △ Less

Submitted 3 February, 1995; v1 submitted 6 December, 1994; originally announced December 1994.

Comments: (12 pages, ReVTeX) Revised version of "Pair Creation of Electrically Charged Black Holes". New section shows that the BH pair creation rate is enhanced by a factor $\exp(BH entropy)$ for any Hamiltonian gravity + matter theory

Report number: CTMP/010/NCSU

Journal ref: Phys.Rev. D51 (1995) 5725-5731

Dust as a Standard of Space and Time in Canonical Quantum Gravity

Authors: J. D. Brown, K. V. Kuchar

Abstract: The coupling of the metric to an incoherent dust introduces into spacetime a privileged dynamical reference frame and time foliation. The comoving coordinates of the dust particles and the proper time along the dust worldlines become canonical coordinates in the phase space of the system. The Hamiltonian constraint can be resolved with respect to the momentum that is canonically conjugate to the… ▽ More The coupling of the metric to an incoherent dust introduces into spacetime a privileged dynamical reference frame and time foliation. The comoving coordinates of the dust particles and the proper time along the dust worldlines become canonical coordinates in the phase space of the system. The Hamiltonian constraint can be resolved with respect to the momentum that is canonically conjugate to the dust time. Imposition of the resolved constraint as an operator restriction on the quantum states yields a functional Schrödinger equation. The ensuing Hamiltonian density has an extraordinary feature: it depends only on the geometric variables, not on the dust coordinates or time. This has three important consequences. First, the functional Schrödinger equation can be solved by separating the dust time from the geometric variables. Second, the Hamiltonian densities strongly commute and therefore can be simultaneously defined by spectral analysis. Third, the standard constraint system of vacuum gravity is cast into a form in which it generates a true Lie algebra. The particles of dust introduce into space a privileged system of coordinates that allows the supermomentum constraint to be solved explicitly. The Schrödinger equation yields a conserved inner product that can be written in terms of either the instantaneous state functionals or the solutions of constraints. Examples of gravitational observables are given, though neither the intrinsic metric nor the extrinsic curvature are observables. Disregarding factor--ordering difficulties, the introduction of dust provides a satisfactory phenomenological approach to the problem of time in canonical quantum gravity. △ Less

Submitted 1 September, 1994; originally announced September 1994.

Comments: 56 pages (REVTEX file + 3 postscipt figure files)

Journal ref: Phys.Rev.D51:5600-5629,1995

On Variational Principles for Gravitating Perfect Fluids

Authors: J. David Brown

Abstract: The connection is established between two different action principles for perfect fluids in the context of general relativity. For one of these actions, $S$, the fluid four--velocity is expressed as a sum of products of scalar fields and their gradients (the velocity--potential representation). For the other action, ${\bar S}$, the fluid four--velocity is proportional to the totally antisymmetri… ▽ More The connection is established between two different action principles for perfect fluids in the context of general relativity. For one of these actions, $S$, the fluid four--velocity is expressed as a sum of products of scalar fields and their gradients (the velocity--potential representation). For the other action, ${\bar S}$, the fluid four--velocity is proportional to the totally antisymmetric product of gradients of the fluid Lagrangian coordinates. The relationship between $S$ and ${\bar S}$ is established by expressing $S$ in Hamiltonian form and identifying certain canonical coordinates as ignorable. Elimination of these coordinates and their conjugates yields the action ${\bar S}$. The key step in the analysis is a point canonical transformation in which all tensor fields on space are expressed in terms of the Lagrangian coordinate system supplied by the fluid. The canonical transformation is of interest in its own right. It can be applied to any physical system that includes a material medium described by Lagrangian coordinates. The result is a Hamiltonian description of the system in which the momentum constraint is trivial. △ Less

Submitted 12 July, 1994; v1 submitted 11 July, 1994; originally announced July 1994.

Comments: (29 pages, REVTEX) (\end{document} statement has been added. That's all.)

The Path Integral Formulation of Gravitational Thermodynamics

Authors: J. D. Brown, J. W. York

Abstract: The first objective of this article is to show that the black hole partition function can be placed on a firm logical foundation by enclosing the black hole in a spatially finite "box" or boundary. The presence of the box has the effect of stabilizing the black hole and yields a system with a positive heat capacity. The second objective of this article is to explore the origin of black hole entr… ▽ More The first objective of this article is to show that the black hole partition function can be placed on a firm logical foundation by enclosing the black hole in a spatially finite "box" or boundary. The presence of the box has the effect of stabilizing the black hole and yields a system with a positive heat capacity. The second objective of this article is to explore the origin of black hole entropy. This is accomplished through the construction of a path integral expression for the density matrix for the gravitational field, and through an analysis of the connection between the density matrix and the black hole density of states. Our results suggest that black hole entropy can be associated with an absence of certain "inner boundary information" for the system. (Based on the talk presented by J.D. Brown at the conference "The Black Hole 25 Years After", Santiago, Chile, January 1994.) △ Less

Submitted 19 January, 1996; v1 submitted 9 May, 1994; originally announced May 1994.

Comments: 24 pages, LaTeX. Revised version contains additional remarks in the introduction and minor corrections

Report number: CTMP/007/NCSU, IFP-UNC-491, TAR-UNC-043

Temperature, Energy, and Heat Capacity of Asymptotically Anti-De Sitter Black Holes

Authors: J. D. Brown, J. Creighton, R. B. Mann

Abstract: We investigate the thermodynamical properties of black holes in (3+1) and (2+1) dimensional Einstein gravity with a negative cosmological constant. In each case, the thermodynamic internal energy is computed for a finite spatial region that contains the black hole. The temperature at the boundary of this region is defined by differentiating the energy with respect to entropy, and is equal to the… ▽ More We investigate the thermodynamical properties of black holes in (3+1) and (2+1) dimensional Einstein gravity with a negative cosmological constant. In each case, the thermodynamic internal energy is computed for a finite spatial region that contains the black hole. The temperature at the boundary of this region is defined by differentiating the energy with respect to entropy, and is equal to the product of the surface gravity (divided by~$2π$) and the Tolman redshift factor for temperature in a stationary gravitational field. We also compute the thermodynamic surface pressure and, in the case of the (2+1) black hole, show that the chemical potential conjugate to angular momentum is equal to the proper angular velocity of the black hole with respect to observers who are at rest in the stationary time slices. In (3+1) dimensions, a calculation of the heat capacity reveals the existence of a thermodynamically stable black hole solution and a negative heat capacity instanton. This result holds in the limit that the spatial boundary tends to infinity only if the comological constant is negative; if the cosmological constant vanishes, the stable black hole solution is lost. In (2+1) dimensions, a calculation of the heat capacity reveals the existence of a thermodynamically stable black hole solution, but no negative heat capacity instanton. △ Less

Submitted 3 May, 1994; originally announced May 1994.

Comments: (21 pages, Plain TeX)

Journal ref: Phys.Rev. D50 (1994) 6394-6403

Microcanonical Action and the Entropy of a Rotating Black Hole

Authors: J. David Brown, James W. York

Abstract: The authors have recently proposed a ``microcanonical functional integral" representation of the density of quantum states of the gravitational field. The phase of this real--time functional integral is determined by a ``microcanonical" or Jacobi action, the extrema of which are classical solutions at fixed total energy, not at fixed total time interval as in Hamilton's action. This approach is… ▽ More The authors have recently proposed a ``microcanonical functional integral" representation of the density of quantum states of the gravitational field. The phase of this real--time functional integral is determined by a ``microcanonical" or Jacobi action, the extrema of which are classical solutions at fixed total energy, not at fixed total time interval as in Hamilton's action. This approach is fully general but is especially well suited to gravitating systems because for them the total energy can be fixed simply as a boundary condition on the gravitational field. In this paper we describe how to obtain Jacobi's action for general relativity. We evaluate it for a certain complex metric associated with a rotating black hole and discuss the relation of the result to the density of states and to the entropy of the black hole. (Dedicated to Yvonne Choquet-Bruhat in honor of her retirement.) △ Less

Submitted 8 March, 1993; originally announced March 1993.

Comments: 12 pages, plain tex

Jacobi's Action and the Density of States

Authors: J. David Brown, James W. York

Abstract: The authors have introduced recently a ``microcanonical functional integral" which yields directly the density of states as a function of energy. The phase of the functional integral is Jacobi's action, the extrema of which are classical solutions at a given energy. This approach is general but is especially well suited to gravitating systems because for them the total energy can be fixed simply… ▽ More The authors have introduced recently a ``microcanonical functional integral" which yields directly the density of states as a function of energy. The phase of the functional integral is Jacobi's action, the extrema of which are classical solutions at a given energy. This approach is general but is especially well suited to gravitating systems because for them the total energy can be fixed simply as a boundary condition on the gravitational field. In this paper, however, we ignore gravity and illustrate the use of Jacobi's action by computing the density of states for a nonrelativistic harmonic oscillator. (Festschrift for Dieter Brill) △ Less

Submitted 19 January, 1993; v1 submitted 18 January, 1993; originally announced January 1993.

Comments: 10 pages, plain tex. (This replaces the previous version which consisted of less than half of the manuscript.)