Showing 1–10 of 10 results for author: Brothers, M

High throughput data-driven design of laser crystallized 2D MoS2 chemical sensors

Authors: Drake Austin, Paige Miesle, Deanna Sessions, Michael Motala, David Moore, Griffin Beyer, Adam Miesle, Andrew Sarangan, Amritanand Sebastian, Saptarshi Das, Anand Puthirath, Xiang Zhang, Jordan Hachtel, Pulickel Ajayan, Tyson Back, Peter Stevenson, Michael Brothers, Steven Kim, Philip Buskohl, Rahul Rao, Christopher Muratore, Nicholas Glavin

Abstract: High throughput characterization and processing techniques are becoming increasingly necessary to navigate multivariable, data-driven design challenges for sensors and electronic devices. For two-dimensional materials, device performance is highly dependent upon a vast array of material properties including number of layers, lattice strain, carrier concentration, defect density, and grain structur… ▽ More High throughput characterization and processing techniques are becoming increasingly necessary to navigate multivariable, data-driven design challenges for sensors and electronic devices. For two-dimensional materials, device performance is highly dependent upon a vast array of material properties including number of layers, lattice strain, carrier concentration, defect density, and grain structure. In this work, laser-crystallization was used to locally pattern and transform hundreds of regions of amorphous MoS2 thin films into 2D 2H-MoS2. A high throughput Raman spectroscopy approach was subsequently used to assess the process-dependent structural and compositional variations for each illuminated region, yielding over 5500 distinct non-resonant, resonant, and polarized Raman spectra. The rapid generation of a comprehensive library of structural and compositional data elucidated important trends between structure-property-processing relationships involving laser-crystallized MoS2, including the relationships between grain size, grain orientation, and intrinsic strain. Moreover, extensive analysis of structure/property relationships allowed for intelligent design, and evaluation of major contributions to, device performance in MoS2 chemical sensors. In particular, it is found that sensor performance is strongly dependent on the orientation of the MoS2 grains relative to the crystal plane. △ Less

Submitted 26 January, 2022; originally announced January 2022.

An ultra-wide bandwidth (704 to 4032 MHz) receiver for the Parkes radio telescope

Authors: G. Hobbs, R. N. Manchester, A. Dunning, A. Jameson, P. Roberts, D. George, J. A. Green, J. Tuthill, L. Toomey, J. F. Kaczmarek, S. Mader, M. Marquarding, A. Ahmed, S. W. Amy, M. Bailes, R. Beresford, N. D. R. Bhat, D. C. -J. Bock, M. Bourne, M. Bowen, M. Brothers, A. D. Cameron, E. Carretti, N. Carter, S. Castillo , et al. (47 additional authors not shown)

Abstract: We describe an ultra-wide-bandwidth, low-frequency receiver ("UWL") recently installed on the Parkes radio telescope. The receiver system provides continuous frequency coverage from 704 to 4032 MHz. For much of the band (~60%) the system temperature is approximately 22K and the receiver system remains in a linear regime even in the presence of strong mobile phone transmissions. We discuss the scie… ▽ More We describe an ultra-wide-bandwidth, low-frequency receiver ("UWL") recently installed on the Parkes radio telescope. The receiver system provides continuous frequency coverage from 704 to 4032 MHz. For much of the band (~60%) the system temperature is approximately 22K and the receiver system remains in a linear regime even in the presence of strong mobile phone transmissions. We discuss the scientific and technical aspects of the new receiver including its astronomical objectives, as well as the feed, receiver, digitiser and signal-processor design. We describe the pipeline routines that form the archive-ready data products and how those data files can be accessed from the archives. The system performance is quantified including the system noise and linearity, beam shape, antenna efficiency, polarisation calibration and timing stability. △ Less

Submitted 2 November, 2019; originally announced November 2019.

Comments: submitted to PASA

The Australian Square Kilometre Array Pathfinder: Performance of the Boolardy Engineering Test Array

Authors: D. McConnell, J. R. Allison, K. Bannister, M. E. Bell, H. E. Bignall, A. P. Chippendale, P. G. Edwards, L. Harvey-Smith, S. Hegarty, I. Heywood, A. W. Hotan, B. T. Indermuehle, E. Lenc, J. Marvil, A. Pop**, W. Raja, J. E. Reynolds, R. J. Sault, P. Serra, M. A. Voronkov, M. Whiting, S. W. Amy, P. Axtens, L. Ball, T. J. Bateman , et al. (49 additional authors not shown)

Abstract: We describe the performance of the Boolardy Engineering Test Array (BETA), the prototype for the Australian Square Kilometre Array Pathfinder telescope ASKAP. BETA is the first aperture synthesis radio telescope to use phased array feed technology, giving it the ability to electronically form up to nine dual-polarization beams. We report the methods developed for forming and measuring the beams, a… ▽ More We describe the performance of the Boolardy Engineering Test Array (BETA), the prototype for the Australian Square Kilometre Array Pathfinder telescope ASKAP. BETA is the first aperture synthesis radio telescope to use phased array feed technology, giving it the ability to electronically form up to nine dual-polarization beams. We report the methods developed for forming and measuring the beams, and the adaptations that have been made to the traditional calibration and imaging procedures in order to allow BETA to function as a multi-beam aperture synthesis telescope. We describe the commissioning of the instrument and present details of BETA's performance: sensitivity, beam characteristics, polarimetric properties and image quality. We summarise the astronomical science that it has produced and draw lessons from operating BETA that will be relevant to the commissioning and operation of the final ASKAP telescope. △ Less

Submitted 2 August, 2016; originally announced August 2016.

Comments: Accepted for publication in PASA

Wide-field broadband radio imaging with phased array feeds: a pilot multi-epoch continuum survey with ASKAP-BETA

Authors: I. Heywood, K. W. Bannister, J. Marvil, J. R. Allison, L. Ball, M. E. Bell, D. C. -J. Bock, M. Brothers, J. D. Bunton, A. P. Chippendale, F. Cooray, T. J. Cornwell, D. DeBoer, P. Edwards, R. Gough, N. Gupta, L. Harvey-Smith, S. Hay, A. W. Hotan, B. Indermuehle, C. Jacka, C. A. Jackson, S. Johnston, A. E. Kimball, B. S. Koribalski , et al. (23 additional authors not shown)

Abstract: The Boolardy Engineering Test Array is a 6 x 12 m dish interferometer and the prototype of the Australian Square Kilometre Array Pathfinder (ASKAP), equipped with the first generation of ASKAP's phased array feed (PAF) receivers. These facilitate rapid wide-area imaging via the deployment of simultaneous multiple beams within a 30 square degree field of view. By cycling the array through 12 interl… ▽ More The Boolardy Engineering Test Array is a 6 x 12 m dish interferometer and the prototype of the Australian Square Kilometre Array Pathfinder (ASKAP), equipped with the first generation of ASKAP's phased array feed (PAF) receivers. These facilitate rapid wide-area imaging via the deployment of simultaneous multiple beams within a 30 square degree field of view. By cycling the array through 12 interleaved pointing positions and using 9 digitally formed beams we effectively mimic a traditional 1 hour x 108 pointing survey, covering 150 square degrees over 711 - 1015 MHz in 12 hours of observing time. Three such observations were executed over the course of a week. We verify the full bandwidth continuum imaging performance and stability of the system via self-consistency checks and comparisons to existing radio data. The combined three epoch image has arcminute resolution and a 1-sigma thermal noise level of 375 micro-Jy per beam, although the effective noise is a factor 3 higher due to residual sidelobe confusion. From this we derive a catalogue of 3,722 discrete radio components, using the 35 percent fractional bandwidth to measure in-band spectral indices for 1,037 of them. A search for transient events reveals one significantly variable source within the survey area. The survey covers approximately two-thirds of the Spitzer South Pole Telescope Deep Field. This pilot project demonstrates the viability and potential of using PAFs to rapidly and accurately survey the sky at radio wavelengths. △ Less

Submitted 21 January, 2016; originally announced January 2016.

Comments: 20 pages, 13 figures, 4 tables. Accepted for publication in MNRAS

A pilot ASKAP survey of radio transient events in the region around the intermittent pulsar PSR J1107-5907

Authors: G. Hobbs, I. Heywood, M. E. Bell, M. Kerr, A. Rowlinson, S. Johnston, R. M. Shannon, M. A. Voronkov, C. Ward, J. Banyer, P. J. Hancock, Tara Murphy, J. R. Allison, S. W. Amy, L. Ball, K. Bannister, D. C. -J. Bock, D. Brodrick, M. Brothers, A. J. Brown, J. D. Bunton, J. Chapman, A. P. Chippendale, Y. Chung, D. DeBoer , et al. (53 additional authors not shown)

Abstract: We use observations from the Boolardy Engineering Test Array (BETA) of the Australian Square Kilometre Array Pathfinder (ASKAP) telescope to search for transient radio sources in the field around the intermittent pulsar PSR J1107-5907. The pulsar is thought to switch between an "off" state in which no emission is detectable, a weak state and a strong state. We ran three independent transient detec… ▽ More We use observations from the Boolardy Engineering Test Array (BETA) of the Australian Square Kilometre Array Pathfinder (ASKAP) telescope to search for transient radio sources in the field around the intermittent pulsar PSR J1107-5907. The pulsar is thought to switch between an "off" state in which no emission is detectable, a weak state and a strong state. We ran three independent transient detection pipelines on two-minute snapshot images from a 13 hour BETA observation in order to 1) study the emission from the pulsar, 2) search for other transient emission from elsewhere in the image and 3) to compare the results from the different transient detection pipelines. The pulsar was easily detected as a transient source and, over the course of the observations, it switched into the strong state three times giving a typical timescale between the strong emission states of 3.7 hours. After the first switch it remained in the strong state for almost 40 minutes. The other strong states lasted less than 4 minutes. The second state change was confirmed using observations with the Parkes radio telescope. No other transient events were found and we place constraints on the surface density of such events on these timescales. The high sensitivity Parkes observations enabled us to detect individual bright pulses during the weak state and to study the strong state over a wide observing band. We conclude by showing that future transient surveys with ASKAP will have the potential to probe the intermittent pulsar population. △ Less

Submitted 8 December, 2015; originally announced December 2015.

Comments: Accepted by MNRAS

Measured Aperture-Array Noise Temperature of the Mark II Phased Array Feed for ASKAP

Authors: A. P. Chippendale, A. J. Brown, R. J. Beresford, G. A. Hampson, R. D. Shaw, D. B. Hayman, A. Macleod, A. R. Forsyth, S. G. Hay, M. Leach, C. Cantrall, M. L. Brothers, A. W. Hotan

Abstract: We have measured the aperture-array noise temperature of the first Mk. II phased array feed that CSIRO has built for the Australian Square Kilometre Array Pathfinder telescope. As an aperture array, the Mk. II phased array feed achieves a beam equivalent noise temperature less than 40 K from 0.78 GHz to 1.7 GHz and less than 50 K from 0.7 GHz to 1.8 GHz for a boresight beam directed at the zenith.… ▽ More We have measured the aperture-array noise temperature of the first Mk. II phased array feed that CSIRO has built for the Australian Square Kilometre Array Pathfinder telescope. As an aperture array, the Mk. II phased array feed achieves a beam equivalent noise temperature less than 40 K from 0.78 GHz to 1.7 GHz and less than 50 K from 0.7 GHz to 1.8 GHz for a boresight beam directed at the zenith. We believe these are the lowest reported noise temperatures over these frequency ranges for ambient-temperature phased arrays. The measured noise temperature includes receiver electronics noise, ohmic losses in the array, and stray radiation from sidelobes illuminating the sky and ground away from the desired field of view. This phased array feed was designed for the Australian Square Kilometre Array Pathfinder to demonstrate fast astronomical surveys with a wide field of view for the Square Kilometre Array. △ Less

Submitted 6 November, 2015; v1 submitted 17 September, 2015; originally announced September 2015.

Comments: 5 pages, 4 figures, accepted for publication in Antennas and Propagation (ISAP), 2015 International Symposium on

Report number: EP155528

Journal ref: 2015 International Symposium on Antennas and Propagation (ISAP), Hobart, TAS, 2015, pp. 1-4

Measured Sensitivity of the First Mark II Phased Array Feed on an ASKAP Antenna

Authors: A. P. Chippendale, A. J. Brown, R. J. Beresford, G. A. Hampson, A. Macleod, R. D. Shaw, M. L. Brothers, C. Cantrall, A. R. Forsyth, S. G. Hay, M. Leach

Abstract: This paper presents the measured sensitivity of CSIRO's first Mk. II phased array feed (PAF) on an ASKAP antenna. The Mk. II achieves a minimum system-temperature-over-efficiency $T_\mathrm{sys}/η$ of 78 K at 1.23 GHz and is 95 K or better from 835 MHz to 1.8 GHz. This PAF was designed for the Australian SKA Pathfinder telescope to demonstrate fast astronomical surveys with a wide field of view fo… ▽ More This paper presents the measured sensitivity of CSIRO's first Mk. II phased array feed (PAF) on an ASKAP antenna. The Mk. II achieves a minimum system-temperature-over-efficiency $T_\mathrm{sys}/η$ of 78 K at 1.23 GHz and is 95 K or better from 835 MHz to 1.8 GHz. This PAF was designed for the Australian SKA Pathfinder telescope to demonstrate fast astronomical surveys with a wide field of view for the Square Kilometre Array (SKA). △ Less

Submitted 1 September, 2015; originally announced September 2015.

Comments: 5 pages, 2 figures, accepted for publication in Electromagnetics in Advanced applications (ICEAA), 2015 International Conference on

ASKAP HI imaging of the galaxy group IC 1459

Authors: P. Serra, B. Koribalski, V. Kilborn, J. R. Allison, S. W. Amy, L. Ball, K. Bannister, M. E. Bell, D. C. -J. Bock, R. Bolton, M. Bowen, B. Boyle, S. Broadhurst, D. Brodrick, M. Brothers, J. D. Bunton, J. Chapman, W. Cheng, A. P. Chippendale, Y. Chung, F. Cooray, T. Cornwell, D. DeBoer, P. Diamond, R. Forsyth , et al. (54 additional authors not shown)

Abstract: We present HI imaging of the galaxy group IC 1459 carried out with six antennas of the Australian SKA Pathfinder equipped with phased-array feeds. We detect and resolve HI in eleven galaxies down to a column density of $\sim10^{20}$ cm$^{-2}$ inside a ~6 deg$^2$ field and with a resolution of ~1 arcmin on the sky and ~8 km/s in velocity. We present HI images, velocity fields and integrated spectra… ▽ More We present HI imaging of the galaxy group IC 1459 carried out with six antennas of the Australian SKA Pathfinder equipped with phased-array feeds. We detect and resolve HI in eleven galaxies down to a column density of $\sim10^{20}$ cm$^{-2}$ inside a ~6 deg$^2$ field and with a resolution of ~1 arcmin on the sky and ~8 km/s in velocity. We present HI images, velocity fields and integrated spectra of all detections, and highlight the discovery of three HI clouds -- two in the proximity of the galaxy IC 5270 and one close to NGC 7418. Each cloud has an HI mass of $10^9$ M$_\odot$ and accounts for ~15% of the HI associated with its host galaxy. Available images at ultraviolet, optical and infrared wavelengths do not reveal any clear stellar counterpart of any of the clouds, suggesting that they are not gas-rich dwarf neighbours of IC 5270 and NGC 7418. Using Parkes data we find evidence of additional extended, low-column-density HI emission around IC 5270, indicating that the clouds are the tip of the iceberg of a larger system of gas surrounding this galaxy. This result adds to the body of evidence on the presence of intra-group gas within the IC 1459 group. Altogether, the HI found outside galaxies in this group amounts to several times $10^9$ M$_\odot$, at least 10% of the HI contained inside galaxies. This suggests a substantial flow of gas in and out of galaxies during the several billion years of the group's evolution. △ Less

Submitted 14 June, 2015; originally announced June 2015.

Comments: MNRAS accepted

Discovery of HI gas in a young radio galaxy at $z = 0.44$ using the Australian Square Kilometre Array Pathfinder

Authors: J. R. Allison, E. M. Sadler, V. A. Moss, M. T. Whiting, R. W. Hunstead, M. B. Pracy, S. J. Curran, S. M. Croom, M. Glowacki, R. Morganti, S. S. Shabala, M. A. Zwaan, G. Allen, S. W. Amy, P. Axtens, L. Ball, K. W. Bannister, S. Barker, M. E. Bell, D. C. -J. Bock, R. Bolton, M. Bowen, B. Boyle, R. Braun, S. Broadhurst , et al. (78 additional authors not shown)

Abstract: We report the discovery of a new 21-cm HI absorption system using commissioning data from the Boolardy Engineering Test Array of the Australian Square Kilometre Array Pathfinder (ASKAP). Using the 711.5 - 1015.5 MHz band of ASKAP we were able to conduct a blind search for the 21-cm line in a continuous redshift range between $z = 0.4$ and 1.0, which has, until now, remained largely unexplored. The… ▽ More We report the discovery of a new 21-cm HI absorption system using commissioning data from the Boolardy Engineering Test Array of the Australian Square Kilometre Array Pathfinder (ASKAP). Using the 711.5 - 1015.5 MHz band of ASKAP we were able to conduct a blind search for the 21-cm line in a continuous redshift range between $z = 0.4$ and 1.0, which has, until now, remained largely unexplored. The absorption line is detected at $z = 0.44$ towards the GHz-peaked spectrum radio source PKS B1740$-$517 and demonstrates ASKAP's excellent capability for performing a future wide-field survey for HI absorption at these redshifts. Optical spectroscopy and imaging using the Gemini-South telescope indicates that the HI gas is intrinsic to the host galaxy of the radio source. The narrow OIII emission lines show clear double-peaked structure, indicating either large-scale outflow or rotation of the ionized gas. Archival data from the \emph{XMM-Newton} satellite exhibit an absorbed X-ray spectrum that is consistent with a high column density obscuring medium around the active galactic nucleus. The HI absorption profile is complex, with four distinct components ranging in width from 5 to 300 km s$^{-1}$ and fractional depths from 0.2 to 20 per cent. In addition to systemic HI gas, in a circumnuclear disc or ring structure aligned with the radio jet, we find evidence for a possible broad outflow of neutral gas moving at a radial velocity of $v \sim 300$ km s$^{-1}$. We infer that the expanding young radio source ($t_{\rm age} \approx 2500$ yr) is cocooned within a dense medium and may be driving circumnuclear neutral gas in an outflow of $\sim$ 1 $\mathrm{M}_{\odot}$ yr$^{-1}$. △ Less

Submitted 16 August, 2015; v1 submitted 4 March, 2015; originally announced March 2015.

Comments: 18 pages, 11 figures, accepted for publication in MNRAS

The Australian Square Kilometre Array Pathfinder: System Architecture and Specifications of the Boolardy Engineering Test Array

Authors: A. W. Hotan, J. D. Bunton, L. Harvey-Smith, B. Humphreys, B. D. Jeffs, T. Shimwell, J. Tuthill, M. Voronkov, G. Allen, S. Amy, K. Ardern, P. Axtens, L. Ball, K. Bannister, S. Barker, T. Bateman, R. Beresford, D. Bock, R. Bolton, M. Bowen, B. Boyle, R. Braun, S. Broadhurst, D. Brodrick, K. Brooks , et al. (76 additional authors not shown)

Abstract: This paper describes the system architecture of a newly constructed radio telescope - the Boolardy Engineering Test Array, which is a prototype of the Australian Square Kilometre Array Pathfinder telescope. Phased array feed technology is used to form multiple simultaneous beams per antenna, providing astronomers with unprecedented survey speed. The test array described here is a 6-antenna interfe… ▽ More This paper describes the system architecture of a newly constructed radio telescope - the Boolardy Engineering Test Array, which is a prototype of the Australian Square Kilometre Array Pathfinder telescope. Phased array feed technology is used to form multiple simultaneous beams per antenna, providing astronomers with unprecedented survey speed. The test array described here is a 6-antenna interferometer, fitted with prototype signal processing hardware capable of forming at least 9 dual-polarisation beams simultaneously, allowing several square degrees to be imaged in a single pointed observation. The main purpose of the test array is to develop beamforming and wide-field calibration methods for use with the full telescope, but it will also be capable of limited early science demonstrations. △ Less

Submitted 4 September, 2014; originally announced September 2014.

Comments: 17 pages, 12 figures, accepted for publication in PASA