-
Data-Driven Statistical Reduced-Order Modeling and Quantification of Polycrystal Mechanics Leading to Porosity-Based Ductile Damage
Authors:
Yinling Zhang,
Nan Chen,
Curt A. Bronkhorst,
Hansohl Cho,
Robert Argus
Abstract:
Predicting the process of porosity-based ductile damage in polycrystalline metallic materials is an essential practical topic. Ductile damage and its precursors are represented by extreme values in stress and material state quantities, the spatial PDF of which are highly non-Gaussian with strong fat tails. Traditional deterministic forecasts using physical models often fail to capture the statisti…
▽ More
Predicting the process of porosity-based ductile damage in polycrystalline metallic materials is an essential practical topic. Ductile damage and its precursors are represented by extreme values in stress and material state quantities, the spatial PDF of which are highly non-Gaussian with strong fat tails. Traditional deterministic forecasts using physical models often fail to capture the statistics of structural evolution during material deformation. This study proposes a data-driven statistical reduced-order modeling framework to provide a probabilistic forecast of the deformation process leading to porosity-based ductile damage, with uncertainty quantification. The framework starts with computing the time evolution of the leading moments of specific state variables from full-field polycrystal simulations. Then a sparse model identification algorithm based on causation entropy, including essential physical constraints, is used to discover the governing equations of these moments. An approximate solution of the time evolution of the PDF is obtained from the predicted moments exploiting the maximum entropy principle. Numerical experiments based on polycrystal realizations show that the model can characterize the time evolution of the non-Gaussian PDF of the von Mises stress and quantify the probability of extreme events. The learning process also reveals that the mean stress interacts with higher-order moments and extreme events in a strongly nonlinear and multiplicative fashion. In addition, the calibrated moment equations provide a reasonably accurate forecast when applied to the realizations outside the training data set, indicating the robustness of the model and the skill for extrapolation. Finally, an information-based measurement shows that the leading four moments are sufficient to characterize the crucial non-Gaussian features throughout the entire deformation history.
△ Less
Submitted 12 March, 2023;
originally announced March 2023.
-
Deformation and dislocation evolution in body-centered-cubic single- and polycrystal tantalum
Authors:
Seunghyeon Lee,
Hansohl Cho,
Curt A. Bronkhorst,
Reeju Pokharel,
Donald W. Brown,
Bjørn Clausen,
Sven C. Vogel,
Veronica Anghel,
George T. Gray III,
Jason R. Mayeur
Abstract:
A physically-informed continuum crystal plasticity model is presented to elucidate the deformation mechanisms and dislocation evolution in body-centered-cubic (bcc) tantalum widely used as a key structural material for mechanical and thermal extremes. We show our unified structural modeling framework informed by mesoscopic dislocation dynamics simulations is capable of capturing salient features o…
▽ More
A physically-informed continuum crystal plasticity model is presented to elucidate the deformation mechanisms and dislocation evolution in body-centered-cubic (bcc) tantalum widely used as a key structural material for mechanical and thermal extremes. We show our unified structural modeling framework informed by mesoscopic dislocation dynamics simulations is capable of capturing salient features of the large inelastic behavior of tantalum at quasi-static (10$^{-3}$ s$^{-1}$) to extreme strain rates (5000 s$^{-1}$) and at room temperature and higher (873K) at both single- and polycrystal levels. We also present predictive capabilities of our model for microstructural evolution in the material. To this end, we investigate the effects of dislocation interactions on slip activities, instability and strain-hardening behavior at the single crystal level. Furthermore, ex situ measurements on crystallographic texture evolution and dislocation density growth are carried out for the polycrystal tantalum specimens at increasing strains. Numerical simulation results also support that our modeling framework is capable of capturing the main features of the polycrystal behavior over a wide range of strains, strain rates and temperatures. The theoretical, experimental and numerical results at both single- and polycrystal levels provide critical insight into the underlying physical pictures for micro- and macroscopic responses and their relations in this important class of refractory bcc materials undergoing severe inelastic deformations.
△ Less
Submitted 30 September, 2021;
originally announced September 2021.
-
Thermomechanical conversion in metals: dislocation plasticity model evaluation of the Taylor-Quinney coefficient
Authors:
Charles K. C. Lieou,
Curt A. Bronkhorst
Abstract:
Using a partitioned-energy thermodynamic framework which assigns energy to that of atomic configurational stored energy of cold work and kinetic-vibrational, we derive an important constraint on the Taylor-Quinney coefficient, which quantifies the fraction of plastic work that is converted into heat during plastic deformation. Associated with the two energy contributions are two separate temperatu…
▽ More
Using a partitioned-energy thermodynamic framework which assigns energy to that of atomic configurational stored energy of cold work and kinetic-vibrational, we derive an important constraint on the Taylor-Quinney coefficient, which quantifies the fraction of plastic work that is converted into heat during plastic deformation. Associated with the two energy contributions are two separate temperatures -- the ordinary temperature for the thermal energy and the effective temperature for the configurational energy. We show that the Taylor-Quinney coefficient is a function of the thermodynamically defined effective temperature that measures the atomic configurational disorder in the material. Finite-element analysis of recently published experiments on the aluminum alloy 6016-T4 \citep{neto_2020}, using the thermodynamic dislocation theory (TDT), shows good agreement between theory and experiment for both stress-strain behavior and temporal evolution of the temperature. The simulations include both conductive and convective thermal energy loss during the experiments, and significant thermal gradients exist within the simulation results. Computed values of the differential Taylor-Quinney coefficient are also presented and suggest a value which differs between materials and increases with increasing strain.
△ Less
Submitted 8 July, 2020;
originally announced July 2020.
-
Thermodynamic theory of crystal plasticity: formulation and application to polycrystal fcc copper
Authors:
Charles K. C. Lieou,
Curt A. Bronkhorst
Abstract:
We present a thermodynamic description of crystal plasticity. Our formulation is based on the Langer-Bouchbinder-Lookman thermodynamic dislocation theory (TDT), which asserts the fundamental importance of an effective temperature that describes the state of configurational disorder and therefore the dislocation density of the crystalline material. We extend the TDT description from isotropic plast…
▽ More
We present a thermodynamic description of crystal plasticity. Our formulation is based on the Langer-Bouchbinder-Lookman thermodynamic dislocation theory (TDT), which asserts the fundamental importance of an effective temperature that describes the state of configurational disorder and therefore the dislocation density of the crystalline material. We extend the TDT description from isotropic plasticity to crystal plasticity with many slip systems. Finite-element simulations show favourable comparison with experiments on polycrystal fcc copper under uniaxial compression, tension, and simple shear. The thermodynamic theory of crystal plasticity thus provides a thermodynamically consistent and physically rigorous description of dislocation motion in crystals. We also discuss new insights about the interaction of dislocations belonging to different slip systems.
△ Less
Submitted 9 December, 2019;
originally announced December 2019.
-
Modeling Material Stress Using Integrated Gaussian Markov Random Fields
Authors:
Peter W. Marcy,
Scott A. Vander Wiel,
Curtis B. Storlie,
Veronica Livescu,
Curt A. Bronkhorst
Abstract:
The equations of a physical constitutive model for material stress within tantalum grains were solved numerically using a tetrahedrally meshed volume. The resulting output included a scalar vonMises stress for each of the more than 94,000 tetrahedra within the finite element discretization. In this paper, we define an intricate statistical model for the spatial field of vonMises stress which uses…
▽ More
The equations of a physical constitutive model for material stress within tantalum grains were solved numerically using a tetrahedrally meshed volume. The resulting output included a scalar vonMises stress for each of the more than 94,000 tetrahedra within the finite element discretization. In this paper, we define an intricate statistical model for the spatial field of vonMises stress which uses the given grain geometry in a fundamental way. Our model relates the three-dimensional field to integrals of latent stochastic processes defined on the vertices of the one- and two-dimensional grain boundaries. An intuitive neighborhood structure of said boundary nodes suggested the use of a latent Gaussian Markov random field (GMRF). However, despite the potential for computational gains afforded by GMRFs, the integral nature of our model and the sheer number of data points pose substantial challenges for a full Bayesian analysis. To overcome these problems and encourage efficient exploration of the posterior distribution, a number of techniques are now combined: parallel computing, sparse matrix methods, and a modification of a block update strategy within the sampling routine. In addition, we use an auxiliary variables approach to accommodate the presence of outliers in the data.
△ Less
Submitted 6 November, 2019;
originally announced November 2019.
-
Strain localization and dynamic recrystallization in polycrystalline metals: thermodynamic theory and simulation framework
Authors:
Charles K. C. Lieou,
Hashem M. Mourad,
Curt A. Bronkhorst
Abstract:
We describe a theoretical and computational framework for adiabatic shear banding (ASB) and dynamic recrystallization (DRX) in polycrystalline materials. The Langer-Bouchbinder-Lookman (LBL) thermodynamic theory of polycrystalline plasticity, which we recently reformulated to describe DRX via the inclusion of the grain boundary density or the grain size as an internal state variable, provides a co…
▽ More
We describe a theoretical and computational framework for adiabatic shear banding (ASB) and dynamic recrystallization (DRX) in polycrystalline materials. The Langer-Bouchbinder-Lookman (LBL) thermodynamic theory of polycrystalline plasticity, which we recently reformulated to describe DRX via the inclusion of the grain boundary density or the grain size as an internal state variable, provides a convenient and self-consistent way to represent the viscoplastic and thermal behavior of the material, with minimal ad-hoc assumptions regarding the initiation of yielding or onset of shear banding. We implement the LBL-DRX theory in conjunction with a finite-element computational framework. Favorable comparison to experimental measurements on a top-hat AISI 316L stainless steel sample compressed with a split-Hopkinson pressure bar suggests the accuracy and usefulness of the LBL-DRX framework, and demonstrates the crucial role of DRX in strain localization.
△ Less
Submitted 24 August, 2018; v1 submitted 22 August, 2018;
originally announced August 2018.
-
Dynamic recrystallization in adiabatic shear banding: effective-temperature model and comparison to experiments in ultrafine-grained titanium
Authors:
Charles K. C. Lieou,
Curt A. Bronkhorst
Abstract:
Dynamic recrystallization (DRX) is often observed in conjunction with adiabatic shear banding (ASB) in polycrystalline materials. The recrystallized nanograins in the shear band have few dislocations compared to the material outside of the shear band. In this paper, we reformulate the recently-developed Langer-Bouchbinder-Lookman (LBL) continuum theory of polycrystalline plasticity and include the…
▽ More
Dynamic recrystallization (DRX) is often observed in conjunction with adiabatic shear banding (ASB) in polycrystalline materials. The recrystallized nanograins in the shear band have few dislocations compared to the material outside of the shear band. In this paper, we reformulate the recently-developed Langer-Bouchbinder-Lookman (LBL) continuum theory of polycrystalline plasticity and include the creation of grain boundaries. While the shear-banding instability emerges because thermal heating is faster than heat dissipation, recrystallization is interpreted as an entropic effect arising from the competition between dislocation creation and grain boundary formation. We show that our theory closely matches recent results in sheared ultrafine-grained titanium. The theory thus provides a thermodynamically consistent way to systematically describe the formation of shear bands and recrystallized grains therein.
△ Less
Submitted 25 January, 2018;
originally announced January 2018.
-
Anomalous Plasticity of Body-Centered-Cubic Crystals with Non-Schmid Effect
Authors:
Hansohl Cho,
Curt A. Bronkhorst,
Hashem M. Mourad,
Jason R. Mayeur,
D. J. Luscher
Abstract:
Plastic deformations in body-centered-cubic (BCC) crystals have been of critical importance in diverse engineering and manufacturing contexts across length scales. Numerous experiments and atomistic simulations on BCC crystals reveal that classical crystal plasticity models with the Schmid law are not adequate to account for abnormal plastic deformations often found in these crystals. In this pape…
▽ More
Plastic deformations in body-centered-cubic (BCC) crystals have been of critical importance in diverse engineering and manufacturing contexts across length scales. Numerous experiments and atomistic simulations on BCC crystals reveal that classical crystal plasticity models with the Schmid law are not adequate to account for abnormal plastic deformations often found in these crystals. In this paper, we address a continuum mechanical treatment of anomalous plasticity in BCC crystals exhibiting non-Schmid effects, inspired from atomistic simulations recently reported. Specifically, anomalous features of plastic flows are addressed in conjunction with a single crystal constitutive model involving two non-Schmid projection tensors widely accepted for representing non-glide components of an applied stress tensor. Further, modeling results on a representative BCC single crystal (tantalum) are presented and compared to experimental data at a range of low temperatures to provide physical insight into deformation mechanisms in these crystals with non-Schmid effects.
△ Less
Submitted 13 August, 2017;
originally announced August 2017.
