-
A Test for IP-ECN Propagation by a Remote Tunnel Endpoint
Authors:
Bob Briscoe
Abstract:
This memo defines a brief set of tests to determine the decapsulation behaviour of an unknown remote tunnel endpoint with respect to the Explicit Congestion Notification (ECN) field in the Internet Protocol (IP) header. The tests could be automated to be used by a tunnel ingress to determine whether the egress that it is paired with will propagate ECN correctly.
This memo defines a brief set of tests to determine the decapsulation behaviour of an unknown remote tunnel endpoint with respect to the Explicit Congestion Notification (ECN) field in the Internet Protocol (IP) header. The tests could be automated to be used by a tunnel ingress to determine whether the egress that it is paired with will propagate ECN correctly.
△ Less
Submitted 28 November, 2023;
originally announced November 2023.
-
Friendliness between AIMD Algorithms
Authors:
Bob Briscoe,
Olga Albisser
Abstract:
This paper aims to provide a robust grounding for the additive increase factor used in the `TCP-Friendly' mode of the CUBIC congestion control algorithm.
This paper aims to provide a robust grounding for the additive increase factor used in the `TCP-Friendly' mode of the CUBIC congestion control algorithm.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Disentangling Flaws in Linux DCTCP
Authors:
Joakim Misund,
Bob Briscoe
Abstract:
In the process of testing improvements to the Linux DCTCP code in various scenarios, we found different performance problems kept surfacing with no apparent pattern. This report records a systematic sequence of experiments designed to track down the causes of these problems, which were found to be due to a complex tangle of bugs and flaws. The report also provides and evaluates solutions in each c…
▽ More
In the process of testing improvements to the Linux DCTCP code in various scenarios, we found different performance problems kept surfacing with no apparent pattern. This report records a systematic sequence of experiments designed to track down the causes of these problems, which were found to be due to a complex tangle of bugs and flaws. The report also provides and evaluates solutions in each case.
△ Less
Submitted 14 November, 2022;
originally announced November 2022.
-
Dual Queue Coupled AQM: Deployable Very Low Queuing Delay for All
Authors:
Koen De Schepper,
Olga Albisser,
Olivier Tilmans,
Bob Briscoe
Abstract:
On the Internet, sub-millisecond queueing delay and capacity-seeking have traditionally been considered mutually exclusive. We introduce a service that offers both: Low Latency Low Loss Scalable throughput (L4S). When tested under a wide range of conditions emulated on a testbed using real residential broadband equipment, queue delay remained both low (median 100--300 $μ$s) and consistent (99th pe…
▽ More
On the Internet, sub-millisecond queueing delay and capacity-seeking have traditionally been considered mutually exclusive. We introduce a service that offers both: Low Latency Low Loss Scalable throughput (L4S). When tested under a wide range of conditions emulated on a testbed using real residential broadband equipment, queue delay remained both low (median 100--300 $μ$s) and consistent (99th percentile below 2 ms even under highly dynamic workloads), without compromising other metrics (zero congestion loss and close to full utilization). L4S exploits the properties of `Scalable' congestion controls (e.g., DCTCP, TCP Prague). Flows using such congestion control are however very aggressive, which causes a deployment challenge as L4S has to coexist with so-called `Classic' flows (e.g., Reno, CUBIC). This paper introduces an architectural solution: `Dual Queue Coupled Active Queue Management', which enables balance between Scalable and Classic flows. It counterbalances the more aggressive response of Scalable flows with more aggressive marking, without having to inspect flow identifiers. The Dual Queue structure has been implemented as a Linux queuing discipline. It acts like a semi-permeable membrane, isolating the latency of Scalable and `Classic' traffic, but coupling their capacity into a single bandwidth pool. This paper justifies the design and implementation choices, and visualizes a representative selection of hundreds of thousands of experiment runs to test our claims.
△ Less
Submitted 2 September, 2022;
originally announced September 2022.
-
PI$^2$ Parameters
Authors:
Bob Briscoe
Abstract:
This report gives the reasoning for the setting of the target queue delay parameter in the reference Linux implementation of PI$^2$ Active Queue Management (AQM)
This report gives the reasoning for the setting of the target queue delay parameter in the reference Linux implementation of PI$^2$ Active Queue Management (AQM)
△ Less
Submitted 27 October, 2021; v1 submitted 2 June, 2021;
originally announced July 2021.
-
Removing the Clock Machinery Lag from DCTCP/Prague
Authors:
Bob Briscoe
Abstract:
This report explains how DCTCP takes 2--3 rounds before it even starts to respond to congestion. This is due to the clocking machinery in its moving average of congestion feedback. Instead, per-ACK mechanisms are proposed, which cut out all the extra lag, leaving just the inherent single round of feedback delay. Even though clocking per ACK updates the average much more frequently, it is arranged…
▽ More
This report explains how DCTCP takes 2--3 rounds before it even starts to respond to congestion. This is due to the clocking machinery in its moving average of congestion feedback. Instead, per-ACK mechanisms are proposed, which cut out all the extra lag, leaving just the inherent single round of feedback delay. Even though clocking per ACK updates the average much more frequently, it is arranged to inherently smooth out variations over the same number of round trips, independent of the number of ACKs per round.
Evaluation of the v02 algorithm found design errors. This version (v04) is published prior to evaluation, in order to elicit early feedback on the design.
△ Less
Submitted 7 September, 2022; v1 submitted 19 January, 2021;
originally announced January 2021.
-
TCP Prague Fall-back on Detection of a Classic ECN AQM
Authors:
Bob Briscoe,
Asad Sajjad Ahmed
Abstract:
The IETF's Prague L4S Requirements [DSBE20] expect an L4S congestion control to somehow detect if there is a classic ECN [RFB01] AQM at the bottleneck and fall back to Reno-friendly behaviour (as it would on a loss). This paper addresses that requirement in depth. A solution has been implemented in Linux and extensively tested, which distinguishes L4S from Classic AQMs primarily by their delay var…
▽ More
The IETF's Prague L4S Requirements [DSBE20] expect an L4S congestion control to somehow detect if there is a classic ECN [RFB01] AQM at the bottleneck and fall back to Reno-friendly behaviour (as it would on a loss). This paper addresses that requirement in depth. A solution has been implemented in Linux and extensively tested, which distinguishes L4S from Classic AQMs primarily by their delay variation. This paper describes version 2 of the design of that solution, giving extensive rationale and pseudocode. It briefly summarizes a comprehensive testbed evaluation of the solution, referring to the full details online. The v2 algorithm very rarely falsely detects a Classic AQM as L4S. It also rarely detects an L4S AQM as Classic in the majority of scenarios, but not at low link rates and large RTTs.
This report is a work in progress. It suggests ideas for improving on the approach. It also outlines new ideas that could solve the problem in complementary or alternative ways.
△ Less
Submitted 19 February, 2021; v1 submitted 2 November, 2019;
originally announced November 2019.
-
Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab -- 2018 update to PR12-16-001
Authors:
M. Battaglieri,
A. Bersani,
G. Bracco,
B. Caiffi,
A. Celentano,
R. De Vita,
L. Marsicano,
P. Musico,
F. Panza,
M. Ripani,
E. Santopinto,
M. Taiuti,
V. Bellini,
M. Bondi',
P. Castorina,
M. De Napoli,
A. Italiano,
V. Kuznetzov,
E. Leonora,
F. Mammoliti,
N. Randazzo,
L. Re,
G. Russo,
M. Russo,
A. Shahinyan
, et al. (100 additional authors not shown)
Abstract:
This document complements and completes what was submitted last year to PAC45 as an update to the proposal PR12-16-001 "Dark matter search in a Beam-Dump eXperiment (BDX)" at Jefferson Lab submitted to JLab-PAC44 in 2016. Following the suggestions contained in the PAC45 report, in coordination with the lab, we ran a test to assess the beam-related backgrounds and validate the simulation framework…
▽ More
This document complements and completes what was submitted last year to PAC45 as an update to the proposal PR12-16-001 "Dark matter search in a Beam-Dump eXperiment (BDX)" at Jefferson Lab submitted to JLab-PAC44 in 2016. Following the suggestions contained in the PAC45 report, in coordination with the lab, we ran a test to assess the beam-related backgrounds and validate the simulation framework used to design the BDX experiment. Using a common Monte Carlo framework for the test and the proposed experiment, we optimized the selection cuts to maximize the reach considering simultaneously the signal, cosmic-ray background (assessed in Catania test with BDX-Proto) and beam-related backgrounds (irreducible NC and CC neutrino interactions as determined by simulation). Our results confirmed what was presented in the original proposal: with 285 days of a parasitic run at 65 $μ$A (corresponding to $10^{22}$ EOT) the BDX experiment will lower the exclusion limits in the case of no signal by one to two orders of magnitude in the parameter space of dark-matter coupling versus mass.
△ Less
Submitted 8 October, 2019;
originally announced October 2019.
-
Physics with Positron Beams at Jefferson Lab 12 GeV
Authors:
A. Afanasev,
I. Albayrak,
S. Ali,
M. Amaryan,
A. D'Angelo,
J. Annand,
J. Arrington,
A. Asaturyan,
H. Avakian,
T. Averett,
L. Barion,
M. Battaglieri,
V. Bellini,
V. Berdnikov,
J. Bernauer,
A. Biselli,
M. Boer,
M. Bondì,
K. -T. Brinkmann,
B. Briscoe,
V. Burkert,
A. Camsonne,
T. Cao,
L. Cardman,
M. Carmignotto
, et al. (102 additional authors not shown)
Abstract:
Positron beams, both polarized and unpolarized, are identified as essential ingredients for the experimental program at the next generation of lepton accelerators. In the context of the Hadronic Physics program at the Jefferson Laboratory (JLab), positron beams are complementary, even essential, tools for a precise understanding of the electromagnetic structure of the nucleon, in both the elastic…
▽ More
Positron beams, both polarized and unpolarized, are identified as essential ingredients for the experimental program at the next generation of lepton accelerators. In the context of the Hadronic Physics program at the Jefferson Laboratory (JLab), positron beams are complementary, even essential, tools for a precise understanding of the electromagnetic structure of the nucleon, in both the elastic and the deep-inelastic regimes. For instance, elastic scattering of (un)polarized electrons and positrons off the nucleon allows for a model independent determination of the electromagnetic form factors of the nucleon. Also, the deeply virtual Compton scattering of (un)polarized electrons and positrons allows us to separate unambiguously the different contributions to the cross section of the lepto-production of photons, enabling an accurate determination of the nucleon Generalized Parton Distributions (GPDs), and providing an access to its Gravitational Form Factors. Furthermore, positron beams offer the possibility of alternative tests of the Standard Model through the search of a dark photon or the precise measurement of electroweak couplings. This letter proposes to develop an experimental positron program at JLab to perform unique high impact measurements with respect to the two-photon exchange problem, the determination of the proton and the neutron GPDs, and the search for the $A^{\prime}$ dark photon.
△ Less
Submitted 22 June, 2019;
originally announced June 2019.
-
Managing a Queue to a Soft Delay Target
Authors:
Bob Briscoe
Abstract:
This memo proposes to transplant the core idea of Curvy RED, the softened delay target, into AQMs that are better designed to deal with dynamics, such as PIE or PI2, but that suffer from the weakness of a fixed delay target.
This memo proposes to transplant the core idea of Curvy RED, the softened delay target, into AQMs that are better designed to deal with dynamics, such as PIE or PI2, but that suffer from the weakness of a fixed delay target.
△ Less
Submitted 15 April, 2019;
originally announced May 2019.
-
Resolving Tensions between Congestion Control Scaling Requirements
Authors:
Bob Briscoe,
Koen De Schepper
Abstract:
Low Latency, Low Loss Scalable throughput (L4S) is being proposed as the new default Internet service. L4S can be considered as an `incrementally deployable clean-slate' for new Internet flow-rate control mechanisms. Because, for a brief period, researchers are free to develop host and network mechanisms in tandem, somewhat unconstrained by any pre-existing legacy.
Scaling requirements represent…
▽ More
Low Latency, Low Loss Scalable throughput (L4S) is being proposed as the new default Internet service. L4S can be considered as an `incrementally deployable clean-slate' for new Internet flow-rate control mechanisms. Because, for a brief period, researchers are free to develop host and network mechanisms in tandem, somewhat unconstrained by any pre-existing legacy.
Scaling requirements represent the main constraints on a clean-slate design space. This document confines its scope to the steady state. It aims to resolve the tensions between a number of apparently conflicting scalability requirements for L4S congestion controllers. It has been produced to inform and provide structure to the debate as researchers work towards pre-standardization consensus on this issue.
This work is important, because clean-slate opportunities like this arise only rarely and will only be available briefly---for roughly one year. The decisions we make now will tend to dirty the slate again, probably for many decades.
△ Less
Submitted 16 April, 2019;
originally announced April 2019.
-
Scaling TCP's Congestion Window for Small Round Trip Times
Authors:
Bob Briscoe,
Koen De Schepper
Abstract:
This memo explains that deploying active queue management (AQM) to counter bufferbloat will not prevent TCP from overriding the AQM and building large queues in a range of not uncommon scenarios. This is a brief paper study to explain this effect which was observed in a number of low latency testbed experiments.
To keep its queue short, an AQM drops (or marks) packets to make the TCP flow(s) tra…
▽ More
This memo explains that deploying active queue management (AQM) to counter bufferbloat will not prevent TCP from overriding the AQM and building large queues in a range of not uncommon scenarios. This is a brief paper study to explain this effect which was observed in a number of low latency testbed experiments.
To keep its queue short, an AQM drops (or marks) packets to make the TCP flow(s) traversing it reduce their packet rate. Nearly all TCP implementations will not run at less than two packets per round trip time (RTT). 2pkt / RTT need not imply low bit-rate if the RTT is small. For instance, it represents 2Mb/s over a 6ms round trip. When a few TCP flows share a link, in certain scenarios, including regular broadband and data centres, no matter how much the AQM signals to the flows to keep the queue short, they will not obey, because it is impossible for them to run below this floor. The memo proposes the necessary modification to the TCP standard.
△ Less
Submitted 16 April, 2019;
originally announced April 2019.
-
Insights from Curvy RED (Random Early Detection)
Authors:
Bob Briscoe,
Koen De Schepper
Abstract:
Active queue management (AQM) drops packets early in the growth of a queue, to prevent a capacity-seeking sender (e.g. TCP) from kee** the buffer full. An AQM can mark instead of drop** packets if they indicate support for explicit congestion notification (ECN). Two modern AQMs (PIE and CoDel) are designed to keep queuing delay to a target by drop** packets as load varies. This memo uses Cur…
▽ More
Active queue management (AQM) drops packets early in the growth of a queue, to prevent a capacity-seeking sender (e.g. TCP) from kee** the buffer full. An AQM can mark instead of drop** packets if they indicate support for explicit congestion notification (ECN). Two modern AQMs (PIE and CoDel) are designed to keep queuing delay to a target by drop** packets as load varies. This memo uses Curvy RED and an idealised but sufficient model of TCP traffic to explain why attempting to keep delay constant is a bad idea, because it requires excessively high drop at high loads. This high drop itself takes over from queuing delay as the dominant cause of delay, particularly for short flows. At high load, a link is better able to preserve reasonable performance if the delay target is softened into a curve rather than a hard cap. The analysis proves that the same AQM can be deployed in different parts of a network whatever the capacity with the same optimal configuration. A surprising corollary of this analysis concerns cases with a highly aggregated number of flows through a bottleneck. Although aggregation reduces queue variation, if the target queuing delay of the AQM at that bottleneck is reduced to take advantage of this aggregation, TCP will still increase the loss level because of the reduction in round trip time. The way to resolve this dilemma is to overprovision (a formula is provided). Nonetheless, for traffic with ECN enabled, there is no harm in an AQM holding queuing delay constant or configuring an AQM to take advantage of any reduced delay due to aggregation without over-provisioning. Recently, the requirement of the ECN standard that ECN must be treated the same as drop has been questioned. The insight that the goals of an AQM for drop and for ECN should be different proves that this doubt is justified.
△ Less
Submitted 15 April, 2019;
originally announced April 2019.
-
The Native AQM for L4S Traffic
Authors:
Bob Briscoe
Abstract:
This memo focuses solely on the native AQM of Low Latency Low Loss Scalable throughput (L4S) traffic and proposes various improvements to the original step design. One motivation for DCTCP to use simple step marking was that it was possible to deploy it by merely configuring the RED implementations in existing hardware, albeit in an unexpected configuration by setting parameters to degenerate valu…
▽ More
This memo focuses solely on the native AQM of Low Latency Low Loss Scalable throughput (L4S) traffic and proposes various improvements to the original step design. One motivation for DCTCP to use simple step marking was that it was possible to deploy it by merely configuring the RED implementations in existing hardware, albeit in an unexpected configuration by setting parameters to degenerate values. However, there is no longer any imperative to stick with the original DCTCP step-function design, because changes will be needed to implement the DualQ Coupled AQM anyway, and the requirements for L4S congestion controls are not yet set in stone either. This paper proposes gradient (ramp) marking and a virtual (a.k.a. phantom) queue. It provides a way to implement virtual queuing delay (a.k.a. virtual sojourn time) and scaled virtual sojourn time.
△ Less
Submitted 15 April, 2019;
originally announced April 2019.
-
Rapid Signalling of Queue Dynamics
Authors:
Bob Briscoe
Abstract:
Rather than directly considering the queuing delay of data, this memo focuses on reducing the delay that congestion signals experience within a queue management algorithm, which can be greater than the delay that the data itself experiences within the queue. Once the congestion signals are delayed, regulation of the load becomes more sloppy, and the queue tends to overshoot and undershoot more as…
▽ More
Rather than directly considering the queuing delay of data, this memo focuses on reducing the delay that congestion signals experience within a queue management algorithm, which can be greater than the delay that the data itself experiences within the queue. Once the congestion signals are delayed, regulation of the load becomes more sloppy, and the queue tends to overshoot and undershoot more as a result, leading the data itself to experience greater peaks in queuing delay as well as intermittent under-utilization. Where the service rate of a queue varies, it is preferable to measure the queue in units of time not bytes. However, the size of the queued backlog can be measured in bytes and signalled at the last instant as data leaves the queue, whereas measuring queuing delay introduces inherent delay. This paper proposes 'scaled sojourn time', which scales queuing delay by the ratio between the backlogs at dequeue and enqueue. This is equivalent to scaling the sojourn time by the ratio of the arrival and departure rates averaged over the time spent in the queue. The paper also proposes the removal of delays due to randomness in the signal encoding.
△ Less
Submitted 15 April, 2019;
originally announced April 2019.
-
Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab: an update on PR12-16-001
Authors:
M. Battaglieri,
A. Bersani,
G. Bracco,
B. Caiffi,
A. Celentano,
R. De Vita,
L. Marsicano,
P. Musico,
M. Osipenko,
F. Panza,
M. Ripani,
E. Santopinto,
M. Taiuti,
V. Bellini,
M. Bondi',
P. Castorina,
M. De Napoli,
A. Italiano,
V. Kuznetzov,
E. Leonora,
F. Mammoliti,
N. Randazzo,
L. Re,
G. Russo,
M. Russo
, et al. (101 additional authors not shown)
Abstract:
This document is an update to the proposal PR12-16-001 Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab submitted to JLab-PAC44 in 2016 reporting progress in addressing questions raised regarding the beam-on backgrounds. The concerns are addressed by adopting a new simulation tool, FLUKA, and planning measurements of muon fluxes from the dump with its existing shielding around t…
▽ More
This document is an update to the proposal PR12-16-001 Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab submitted to JLab-PAC44 in 2016 reporting progress in addressing questions raised regarding the beam-on backgrounds. The concerns are addressed by adopting a new simulation tool, FLUKA, and planning measurements of muon fluxes from the dump with its existing shielding around the dump. First, we have implemented the detailed BDX experimental geometry into a FLUKA simulation, in consultation with experts from the JLab Radiation Control Group. The FLUKA simulation has been compared directly to our GEANT4 simulations and shown to agree in regions of validity. The FLUKA interaction package, with a tuned set of biasing weights, is naturally able to generate reliable particle distributions with very small probabilities and therefore predict rates at the detector location beyond the planned shielding around the beam dump. Second, we have developed a plan to conduct measurements of the muon ux from the Hall-A dump in its current configuration to validate our simulations.
△ Less
Submitted 8 January, 2018; v1 submitted 5 December, 2017;
originally announced December 2017.
-
Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab
Authors:
M. Battaglieri,
A. Bersani,
B. Caiffi,
A. Celentano,
R. De Vita,
E. Fanchini,
L. Marsicano,
P. Musico,
M. Osipenko,
F. Panza,
M. Ripani,
E. Santopinto,
M. Taiuti,
V. Bellini,
M. Bondí,
M. De Napoli,
F. Mammoliti,
E. Leonora,
N. Randazzo,
G. Russo,
M. Sperduto,
C. Sutera,
F. Tortorici,
N. Baltzell,
M. Dalton
, et al. (79 additional authors not shown)
Abstract:
MeV-GeV dark matter (DM) is theoretically well motivated but remarkably unexplored. This proposal presents the MeV-GeV DM discovery potential for a $\sim$1 m$^3$ segmented CsI(Tl) scintillator detector placed downstream of the Hall A beam-dump at Jefferson Lab, receiving up to 10$^{22}$ electrons-on-target (EOT) in 285 days. This experiment (Beam-Dump eXperiment or BDX) would be sensitive to elast…
▽ More
MeV-GeV dark matter (DM) is theoretically well motivated but remarkably unexplored. This proposal presents the MeV-GeV DM discovery potential for a $\sim$1 m$^3$ segmented CsI(Tl) scintillator detector placed downstream of the Hall A beam-dump at Jefferson Lab, receiving up to 10$^{22}$ electrons-on-target (EOT) in 285 days. This experiment (Beam-Dump eXperiment or BDX) would be sensitive to elastic DM-electron and to inelastic DM scattering at the level of 10 counts per year, reaching the limit of the neutrino irreducible background. The distinct signature of a DM interaction will be an electromagnetic shower of few hundreds of MeV, together with a reduced activity in the surrounding active veto counters. A detailed description of the DM particle $χ$ production in the dump and subsequent interaction in the detector has been performed by means of Monte Carlo simulations. Different approaches have been used to evaluate the expected backgrounds: the cosmogenic background has been extrapolated from the results obtained with a prototype detector running at INFN-LNS (Italy), while the beam-related background has been evaluated by GEANT4 Monte Carlo simulations. The proposed experiment will be sensitive to large regions of DM parameter space, exceeding the discovery potential of existing and planned experiments in the MeV-GeV DM mass range by up to two orders of magnitude.
△ Less
Submitted 5 July, 2016;
originally announced July 2016.
-
Analysis Tools for Next-Generation Hadron Spectroscopy Experiments
Authors:
M. Battaglieri,
B. J. Briscoe,
A. Celentano,
S. -U. Chung,
A. D'Angelo,
R. De Vita,
M. Döring,
J. Dudek,
S. Eidelman,
S. Fegan,
J. Ferretti,
A. Filippi,
G. Fox,
G. Galata,
H. Garcia-Tecocoatzi,
D. I. Glazier,
B. Grube,
C. Hanhart,
M. Hoferichter,
S. M. Hughes,
D. G. Ireland,
B. Ketzer,
F. J. Klein,
B. Kubis,
B. Liu
, et al. (22 additional authors not shown)
Abstract:
The series of workshops on New Partial-Wave Analysis Tools for Next-Generation Hadron Spectroscopy Experiments was initiated with the ATHOS 2012 meeting, which took place in Camogli, Italy, June 20-22, 2012. It was followed by ATHOS 2013 in Kloster Seeon near Munich, Germany, May 21-24, 2013. The third, ATHOS3, meeting is planned for April 13-17, 2015 at The George Washington University Virginia S…
▽ More
The series of workshops on New Partial-Wave Analysis Tools for Next-Generation Hadron Spectroscopy Experiments was initiated with the ATHOS 2012 meeting, which took place in Camogli, Italy, June 20-22, 2012. It was followed by ATHOS 2013 in Kloster Seeon near Munich, Germany, May 21-24, 2013. The third, ATHOS3, meeting is planned for April 13-17, 2015 at The George Washington University Virginia Science and Technology Campus, USA. The workshops focus on the development of amplitude analysis tools for meson and baryon spectroscopy, and complement other programs in hadron spectroscopy organized in the recent past including the INT-JLab Workshop on Hadron Spectroscopy in Seattle in 2009, the International Workshop on Amplitude Analysis in Hadron Spectroscopy at the ECT*-Trento in 2011, the School on Amplitude Analysis in Modern Physics in Bad Honnef in 2011, the Jefferson Lab Advanced Study Institute Summer School in 2012, and the School on Concepts of Modern Amplitude Analysis Techniques in Flecken-Zechlin near Berlin in September 2013. The aim of this document is to summarize the discussions that took place at the ATHOS 2012 and ATHOS 2013 meetings. We do not attempt a comprehensive review of the field of amplitude analysis, but offer a collection of thoughts that we hope may lay the ground for such a document.
△ Less
Submitted 30 March, 2015; v1 submitted 19 December, 2014;
originally announced December 2014.
-
Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab
Authors:
BDX Collaboration,
M. Battaglieri,
A. Celentano,
R. De Vita,
E. Izaguirre,
G. Krnjaic,
E. Smith,
S. Stepanyan,
A. Bersani,
E. Fanchini,
S. Fegan,
P. Musico,
M. Osipenko,
M. Ripani,
E. Santopinto,
M. Taiuti,
P. Schuster,
N. Toro,
M. Dalton,
A. Freyberger,
F. -X. Girod,
V. Kubarovsky,
M. Ungaro,
G. De Cataldo,
R. De Leo
, et al. (61 additional authors not shown)
Abstract:
MeV-GeV dark matter (DM) is theoretically well motivated but remarkably unexplored. This Letter of Intent presents the MeV-GeV DM discovery potential for a 1 m$^3$ segmented plastic scintillator detector placed downstream of the beam-dump at one of the high intensity JLab experimental Halls, receiving up to 10$^{22}$ electrons-on-target (EOT) in a one-year period. This experiment (Beam-Dump eXperi…
▽ More
MeV-GeV dark matter (DM) is theoretically well motivated but remarkably unexplored. This Letter of Intent presents the MeV-GeV DM discovery potential for a 1 m$^3$ segmented plastic scintillator detector placed downstream of the beam-dump at one of the high intensity JLab experimental Halls, receiving up to 10$^{22}$ electrons-on-target (EOT) in a one-year period. This experiment (Beam-Dump eXperiment or BDX) is sensitive to DM-nucleon elastic scattering at the level of a thousand counts per year, with very low threshold recoil energies ($\sim$1 MeV), and limited only by reducible cosmogenic backgrounds. Sensitivity to DM-electron elastic scattering and/or inelastic DM would be below 10 counts per year after requiring all electromagnetic showers in the detector to exceed a few-hundred MeV, which dramatically reduces or altogether eliminates all backgrounds. Detailed Monte Carlo simulations are in progress to finalize the detector design and experimental set up. An existing 0.036 m$^3$ prototype based on the same technology will be used to validate simulations with background rate estimates, driving the necessary R$\&$D towards an optimized detector. The final detector design and experimental set up will be presented in a full proposal to be submitted to the next JLab PAC. A fully realized experiment would be sensitive to large regions of DM parameter space, exceeding the discovery potential of existing and planned experiments by two orders of magnitude in the MeV-GeV DM mass range.
△ Less
Submitted 11 June, 2014;
originally announced June 2014.
-
Polarization Transfer in the 4He(e,e'p)3H Reaction at Q^2 = 0.8 and 1.3 (GeV/c)^2
Authors:
M. Paolone,
S. P. Malace,
S. Strauch,
I. Albayrak,
J. Arrington,
B. L. Berman,
E. J. Brash,
B. Briscoe,
A. Camsonne,
J. -P. Chen,
M. E. Christy,
E. Chudakov,
E. Cisbani,
B. Craver,
F. Cusanno,
R. Ent,
F. Garibaldi,
R. Gilman,
O. Glamazdin,
J. Glister,
D. W. Higinbotham,
C. E. Hyde-Wright,
Y. Ilieva,
C. W. de Jager,
X. Jiang
, et al. (33 additional authors not shown)
Abstract:
Proton recoil polarization was measured in the quasielastic 4He(e,e'p)3H reaction at Q^2 = 0.8 (GeV/c)^2 and 1.3 (GeV/c)^2 with unprecedented precision. The polarization-transfer coefficients are found to differ from those of the 1H(e,e' p) reaction, contradicting a relativistic distorted-wave approximation, and favoring either the inclusion of medium-modified proton form factors predicted by the…
▽ More
Proton recoil polarization was measured in the quasielastic 4He(e,e'p)3H reaction at Q^2 = 0.8 (GeV/c)^2 and 1.3 (GeV/c)^2 with unprecedented precision. The polarization-transfer coefficients are found to differ from those of the 1H(e,e' p) reaction, contradicting a relativistic distorted-wave approximation, and favoring either the inclusion of medium-modified proton form factors predicted by the quark-meson coupling model or a spin-dependent charge-exchange final-state interaction. For the first time, the polarization-transfer ratio is studied as a function of the virtuality of the proton.
△ Less
Submitted 23 August, 2010; v1 submitted 10 February, 2010;
originally announced February 2010.
