-
First release of Apertif imaging survey data
Authors:
Elizabeth A. K. Adams,
B. Adebahr,
W. J. G. de Blok,
H. Denes,
K. M. Hess,
J. M. van der Hulst,
A. Kutkin,
D. M. Lucero,
R. Morganti,
V. A. Moss,
T. A. Oosterloo,
E. Orru,
R. Schulz,
A. S. van Amesfoort,
A. Berger,
O. M. Boersma,
M. Bouwhuis,
R. van den Brink,
W. A. van Cappellen,
L. Connor,
A. H. W. M. Coolen,
S. Damstra,
G. N. J. van Diepen,
T. J. Dijkema,
N. Ebbendorf
, et al. (34 additional authors not shown)
Abstract:
(Abridged) Apertif is a phased-array feed system for WSRT, providing forty instantaneous beams over 300 MHz of bandwidth. A dedicated survey program started on 1 July 2019, with the last observations taken on 28 February 2022. We describe the release of data products from the first year of survey operations, through 30 June 2020. We focus on defining quality control metrics for the processed data…
▽ More
(Abridged) Apertif is a phased-array feed system for WSRT, providing forty instantaneous beams over 300 MHz of bandwidth. A dedicated survey program started on 1 July 2019, with the last observations taken on 28 February 2022. We describe the release of data products from the first year of survey operations, through 30 June 2020. We focus on defining quality control metrics for the processed data products. The Apertif imaging pipeline, Apercal, automatically produces non-primary beam corrected continuum images, polarization images and cubes, and uncleaned spectral line and dirty beam cubes for each beam of an Apertif imaging observation. For this release, processed data products are considered on a beam-by-beam basis within an observation. We validate the continuum images by using metrics that identify deviations from Gaussian noise in the residual images. If the continuum image passes validation, we release all processed data products for a given beam. We apply further validation to the polarization and line data products. We release all raw observational data from the first year of survey observations, for a total of 221 observations of 160 independent target fields, covering approximately one thousand square degrees of sky. Images and cubes are released on a per beam basis, and 3374 beams are released. The median noise in the continuum images is 41.4 uJy/bm, with a slightly lower median noise of 36.9 uJy/bm in the Stokes V polarization image. The median angular resolution is 11.6"/sin(Dec). The median noise for all line cubes, with a spectral resolution of 36.6 kHz, is 1.6 mJy/bm, corresponding to a 3-sigma HI column density sensitivity of 1.8 x 10^20 atoms cm^-2 over 20 km/s (for a median angular resolution of 24" x 15"). We also provide primary beam images for each individual Apertif compound beam. The data are made accessible using a Virtual Observatory interface.
△ Less
Submitted 22 November, 2022; v1 submitted 10 August, 2022;
originally announced August 2022.
-
Continuum source catalog for the first APERTIF data release
Authors:
A. M. Kutkin,
T. A. Oosterloo,
R. Morganti,
E. A. K. Adams,
M. Mancini,
B. Adebahr,
W. J. G. de Blok,
H. Dénes,
K. M. Hess,
J. M. van der Hulst,
D. M. Lucero,
V. A. Moss,
A. Berger,
R. van den Brink,
W. A. van Cappellen,
L. Connor,
S. Damstra,
G. M. Loose,
J. van Leeuwen,
Y. Maan,
A'. Mika,
M. J. Norden,
A. R. Offringa,
L. C. Oostrum,
D. van der Schuur
, et al. (3 additional authors not shown)
Abstract:
The first data release of Apertif survey contains 3074 radio continuum images covering a thousand square degrees of the sky. The observations were performed during August 2019 to July 2020. The continuum images were produced at a central frequency 1355 MHz with the bandwidth of $\sim$150 MHz and angular resolution reaching 10". In this work we introduce and apply a new method to obtain a primary b…
▽ More
The first data release of Apertif survey contains 3074 radio continuum images covering a thousand square degrees of the sky. The observations were performed during August 2019 to July 2020. The continuum images were produced at a central frequency 1355 MHz with the bandwidth of $\sim$150 MHz and angular resolution reaching 10". In this work we introduce and apply a new method to obtain a primary beam model using a machine learning approach, Gaussian process regression. The primary beam models obtained with this method are published along with the data products for the first Apertif data release. We apply the method to the continuum images, mosaic them and extract the source catalog. The catalog contains 249672 radio sources many of which are detected for the first time at these frequencies. We cross-match the coordinates with the NVSS, LOFAR/DR1/value-added and LOFAR/DR2 catalogs resulting in 44523, 22825 and 152824 common sources respectively. The first sample provides a unique opportunity to detect long term transient sources which have significantly changed their flux density for the last 25 years. The second and the third ones combined together provide information about spectral properties of the sources as well as the redshift estimates.
△ Less
Submitted 10 August, 2022;
originally announced August 2022.
-
Characterising the Apertif primary beam response
Authors:
H. Dénes,
K. M. Hess,
E. A. K. Adams,
A. Kutkin,
R. Morganti,
J. M. van der Hulst,
T. A. Oosterloo,
V. A. Moss,
B. Adebahr,
W. J. G. de Blok,
M. V. Ivashina,
A. H. W. M. Coolen,
S. Damstra,
B. Hut,
G. M. Loose,
D. M. Lucero,
Y. Maan,
Á. Mika,
M. J. Norden,
L. C. Oostrum,
D. J. Pisano,
R. Smits,
W. A. van Cappellen,
R. van den Brink,
D. van der Schuur
, et al. (5 additional authors not shown)
Abstract:
Context. Phased Array Feeds (PAFs) are multi element receivers in the focal plane of a telescope that make it possible to form simultaneously multiple beams on the sky by combining the complex gains of the individual antenna elements. Recently the Westerbork Synthesis Radio Telescope (WSRT) was upgraded with PAF receivers and carried out several observing programs including two imaging surveys and…
▽ More
Context. Phased Array Feeds (PAFs) are multi element receivers in the focal plane of a telescope that make it possible to form simultaneously multiple beams on the sky by combining the complex gains of the individual antenna elements. Recently the Westerbork Synthesis Radio Telescope (WSRT) was upgraded with PAF receivers and carried out several observing programs including two imaging surveys and a time domain survey. The Apertif imaging surveys use a configuration, where 40 partially overlap** compound beams (CBs) are simultaneously formed on the sky and arranged in an approximately rectangular shape. Aims. This manuscript aims to characterise the response of the 40 Apertif CBs to create frequency-resolved, I, XX and YY polarization empirical beam shapes. The measured CB maps can be used for image deconvolution, primary beam correction and mosaicing of Apertif imaging data. Methods. We use drift scan measurements to measure the response of each of the 40 CBs of Apertif. We derive beam maps for all individual beams in I, XX and YY polarisation in 10 or 18 frequency bins over the same bandwidth as the Apertif imaging surveys. We sample the main lobe of the beams and the side lobes up to a radius of 0.6 degrees from the beam centres. In addition, we derive beam maps for each individual WSRT dish as well. Results. We present the frequency and time dependence of the beam shapes and sizes. We compare the compound beam shapes derived with the drift scan method to beam shapes derived with an independent method using a Gaussian Process Regression comparison between the Apertif continuum images and the NRAO VLA Sky Survey (NVSS) catalogue. We find a good agreement between the beam shapes derived with the two independent methods.
△ Less
Submitted 2 August, 2022; v1 submitted 19 May, 2022;
originally announced May 2022.
-
Towards European Standards for Quantum Technologies
Authors:
O. van Deventer,
N. Spethmann,
M. Loeffler,
M. Amoretti,
R. van den Brink,
N. Bruno,
P. Comi,
N. Farrugia,
M. Gramegna,
B. Kassenberg,
W. Kozlowski,
T. Länger,
T. Lindstrom,
V. Martin,
N. Neumann,
H. Papadopoulos,
S. Pascazio,
M. Peev,
R. Pitwon,
M. A. Rol,
P. Traina,
P. Venderbosch,
F. K. Wilhelm-Mauch,
A. Jenet
Abstract:
The Second Quantum Revolution facilitates the engineering of new classes of sensors, communication technologies, and computers with unprecedented capabilities. Supply chains for quantum technologies are emerging, some focussed on commercially available components for enabling technologies and/or quantum-technologies research infrastructures, others with already higher technology-readiness levels,…
▽ More
The Second Quantum Revolution facilitates the engineering of new classes of sensors, communication technologies, and computers with unprecedented capabilities. Supply chains for quantum technologies are emerging, some focussed on commercially available components for enabling technologies and/or quantum-technologies research infrastructures, others with already higher technology-readiness levels, near to the market.
In 2018, the European Commission has launched its large-scale and long-term Quantum Flagship research initiative to support and foster the creation and development of a competitive European quantum technologies industry, as well as the consolidation and expansion of leadership and excellence in European quantum technology research. One of the measures to achieve an accelerated development and uptake has been identified by the Quantum Flagship in its Strategic Research Agenda: the promotion of coordinated, dedicated standardisation and certification efforts. Standardisation is indeed of paramount importance to facilitate the growth of new technologies, and the development of efficient and effective supply chains. The harmonisation of technologies, methodologies, and interfaces enables interoperable products, innovation, and competition, all leading to structuring and hence growth of markets. As quantum technologies are maturing, time has come to start thinking about further standardisation needs.
This article presents insights on standardisation for quantum technologies from the perspective of the CEN-CENELEC Focus Group on Quantum Technologies (FGQT), which was established in June 2020 to coordinate and support the development of standards relevant for European industry and research.
△ Less
Submitted 3 October, 2022; v1 submitted 3 March, 2022;
originally announced March 2022.
-
A fast radio burst with sub-millisecond quasi-periodic structure
Authors:
Inés Pastor-Marazuela,
Joeri van Leeuwen,
Anna Bilous,
Liam Connor,
Yogesh Maan,
Leon Oostrum,
Emily Petroff,
Samayra Straal,
Dany Vohl,
E. A. K. Adams,
B. Adebahr,
Jisk Attema,
Oliver M. Boersma,
R. van den Brink,
W. A. van Cappellen,
A. H. W. M. Coolen,
S. Damstra,
H. Dénes,
K. M. Hess,
J. M. van der Hulst,
B. Hut,
A. Kutkin,
G. Marcel Loose,
D. M. Lucero,
Á. Mika
, et al. (9 additional authors not shown)
Abstract:
Fast radio bursts (FRBs) are extragalactic radio transients of extraordinary luminosity. Studying the diverse temporal and spectral behaviour recently observed in a number of FRBs may help determine the nature of the entire class. For example, a fast spinning or highly magnetised neutron star might generate the rotation-powered acceleration required to explain the bright emission. Periodic, sub-se…
▽ More
Fast radio bursts (FRBs) are extragalactic radio transients of extraordinary luminosity. Studying the diverse temporal and spectral behaviour recently observed in a number of FRBs may help determine the nature of the entire class. For example, a fast spinning or highly magnetised neutron star might generate the rotation-powered acceleration required to explain the bright emission. Periodic, sub-second components, suggesting such rotation, were recently reported in one FRB, and potentially in two more. Here we report the discovery of FRB 20201020A with Apertif, an FRB showing five components regularly spaced by 0.415 ms. This sub-millisecond structure in FRB 20201020A carries important clues about the progenitor of this FRB specifically, and potentially about that of FRBs in general. We thus contrast its features to the predictions of the main FRB source models. We perform a timing analysis of the FRB 20201020A components to determine the significance of the periodicity. We compare these against the timing properties of the previously reported CHIME FRBs with sub-second quasi-periodic components, and against two Apertif bursts from repeating FRB 20180916B that show complex time-frequency structure. We find the periodicity of FRB 20201020A to be marginally significant at 2.5$σ$. Its repeating subcomponents cannot be explained as a pulsar rotation since the required spin rate of over 2 kHz exceeds the limits set by typical neutron star equations of state and observations. The fast periodicity is also in conflict with a compact object merger scenario. These quasi-periodic components could, however, be caused by equidistant emitting regions in the magnetosphere of a magnetar. The sub-millisecond spacing of the components in FRB 20201020A, the smallest observed so far in a one-off FRB, may rule out both neutron-star rotation and binary mergers as the direct source of quasi-periodic FRBs.
△ Less
Submitted 16 February, 2022;
originally announced February 2022.
-
A search for radio emission from double-neutron star merger GW190425 using Apertif
Authors:
Olivér Boersma,
Joeri van Leeuwen,
Elizabeth A. K. Adams,
Björn Adebahr,
Alexander Kutkin,
Tom Oosterloo,
W. J. G. de Blok,
R. van den Brink,
A. H. W. M. Coolen,
L. Connor,
S. Damstra,
H. Dénes,
K. M. Hess,
J. M. van der Hulst,
B. Hut,
M. Ivashina,
G. M. Loose,
D. M. Lucero,
Y. Maan,
Á. Mika,
V. A. Moss,
H. Mulder,
L. C. Oostrum,
M. Ruiter,
D. van der Schuur
, et al. (4 additional authors not shown)
Abstract:
Detection of the electromagnetic emission from coalescing binary neutron stars (BNS) is important for understanding the merger and afterglow. We present a search for a radio counterpart to the gravitational-wave source GW190425, a BNS merger, using Apertif on the Westerbork Synthesis Radio Telescope (WSRT). We observe a field of high probability in the associated localisation region for 3 epochs a…
▽ More
Detection of the electromagnetic emission from coalescing binary neutron stars (BNS) is important for understanding the merger and afterglow. We present a search for a radio counterpart to the gravitational-wave source GW190425, a BNS merger, using Apertif on the Westerbork Synthesis Radio Telescope (WSRT). We observe a field of high probability in the associated localisation region for 3 epochs at 68, 90 and 109 days post merger. We identify all sources that exhibit flux variations consistent with the expected afterglow emission of GW190425. We also look for possible transients. These are sources which are only present in one epoch. In addition, we quantify our ability to search for radio afterglows in fourth and future observing runs of the gravitational-wave detector network using Monte Carlo simulations. We found 25 afterglow candidates based on their variability. None of these could be associated with a possible host galaxy at the luminosity distance of GW190425. We also found 55 transient afterglow candidates that were only detected in one epoch. All turned out to be image artefacts. In the fourth observing run, we predict that up to three afterglows will be detectable by Apertif. While we did not find a source related to the afterglow emission of GW190425, the search validates our methods for future searches of radio afterglows.
△ Less
Submitted 9 April, 2021;
originally announced April 2021.
