-
Parallel refreshed cryogenic charge-locking array with low power dissipation
Authors:
Xinya Bian,
G Andrew D Briggs,
Jan A Mol
Abstract:
To build a large scale quantum circuit comprising millions of cryogenic qubits will require an efficient way to supply large numbers of classic control signals. Given the limited number of direct connections allowed from room temperature, multiple level of signal multiplexing becomes essential. The stacking of hardware to accomplish this task is highly dependent on the lowest level implementation…
▽ More
To build a large scale quantum circuit comprising millions of cryogenic qubits will require an efficient way to supply large numbers of classic control signals. Given the limited number of direct connections allowed from room temperature, multiple level of signal multiplexing becomes essential. The stacking of hardware to accomplish this task is highly dependent on the lowest level implementation of control electronics, of which an open question is the feasibility of mK integration. Such integration is preferred for signal transmission and wire interconnection, provided it is not limited by the large power dissipation involved. Novel cryogenic electronics that prioritises power efficiency has to be developed to meet the tight thermal budget. In this paper, we present a power efficient approach to implement charge-locking array.
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
Reconfigurable multiplex setup for high throughput electrical characterisation at cryogenic temperature
Authors:
Xinya Bian,
Hannah J Joyce,
Charles G Smith,
Michael J Kelly,
G Andrew D Briggs,
Jan A Mol
Abstract:
In this paper, we present a reconfigurable multiplex (MUX) setup that increases the throughput of electrical characterisation at cryogenic temperature. The setup separates the MUX circuitry from quantum device under test (qDUT), allowing qDUT chips to be exchanged easily and MUX chips to be reused. To interface with different types of qDUTs, board-level designs are incorporated to allow interconne…
▽ More
In this paper, we present a reconfigurable multiplex (MUX) setup that increases the throughput of electrical characterisation at cryogenic temperature. The setup separates the MUX circuitry from quantum device under test (qDUT), allowing qDUT chips to be exchanged easily and MUX chips to be reused. To interface with different types of qDUTs, board-level designs are incorporated to allow interconnects flexibly routed into different topology. MUXs are built based on a multiple level selective gating (MLSG) scheme, where the number of multiplexed output channels (interconnects) is exponentially dependent on the number of control lines. In the prototype setup presented in this paper, with 14 out of 44 existing wires from room temperature, 4 MUXs at cryogenic temperature can supply in total 128 interconnects to interface with qDUTs. We validate the MUX setup operation and assess the various limits existed by measuring k$Ω$ resistors made of $μ$m-size graphene ribbons. We further demonstrate the setup by performing charge transport measurement on 128 nm-size graphene quantum devices in a single cooling down.
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
A cry for help: Early detection of brain injury in newborns
Authors:
Charles C. Onu,
Samantha Latremouille,
Arsenii Gorin,
Junhao Wang,
Innocent Udeogu,
Uchenna Ekwochi,
Peter O. Ubuane,
Omolara A. Kehinde,
Muhammad A. Salisu,
Datonye Briggs,
Yoshua Bengio,
Doina Precup
Abstract:
Since the 1960s, neonatal clinicians have known that newborns suffering from certain neurological conditions exhibit altered crying patterns such as the high-pitched cry in birth asphyxia. Despite an annual burden of over 1.5 million infant deaths and disabilities, early detection of neonatal brain injuries due to asphyxia remains a challenge, particularly in develo** countries where the majorit…
▽ More
Since the 1960s, neonatal clinicians have known that newborns suffering from certain neurological conditions exhibit altered crying patterns such as the high-pitched cry in birth asphyxia. Despite an annual burden of over 1.5 million infant deaths and disabilities, early detection of neonatal brain injuries due to asphyxia remains a challenge, particularly in develo** countries where the majority of births are not attended by a trained physician. Here we report on the first inter-continental clinical study to demonstrate that neonatal brain injury can be reliably determined from recorded infant cries using an AI algorithm we call Roseline. Previous and recent work has been limited by the lack of a large, high-quality clinical database of cry recordings, constraining the application of state-of-the-art machine learning. We develop a new training methodology for audio-based pathology detection models and evaluate this system on a large database of newborn cry sounds acquired from geographically diverse settings -- 5 hospitals across 3 continents. Our system extracts interpretable acoustic biomarkers that support clinical decisions and is able to accurately detect neurological injury from newborns' cries with an AUC of 92.5% (88.7% sensitivity at 80% specificity). Cry-based neurological monitoring opens the door for low-cost, easy-to-use, non-invasive and contact-free screening of at-risk babies, especially when integrated into simple devices like smartphones or neonatal ICU monitors. This would provide a reliable tool where there are no alternatives, but also curtail the need to regularly exert newborns to physically-exhausting or radiation-exposing assessments such as brain CT scans. This work sets the stage for embracing the infant cry as a vital sign and indicates the potential of AI-driven sound monitoring for the future of affordable healthcare.
△ Less
Submitted 3 November, 2023; v1 submitted 12 October, 2023;
originally announced October 2023.
-
Quantum Interference Enhances the Performance of Single-Molecule Transistors
Authors:
Zhixin Chen,
Iain M. Grace,
Steffen L. Woltering,
Lina Chen,
Alex Gee,
Jonathan Baugh,
G. Andrew D. Briggs,
Lapo Bogani,
Jan A. Mol,
Colin J. Lambert,
Harry L. Anderson,
James O. Thomas
Abstract:
An unresolved challenge facing electronics at a few-nm scale is that resistive channels start leaking due to quantum tunneling. This affects the performance of nanoscale transistors, with single-molecule devices displaying particularly low switching ratios and operating frequencies, combined with large subthreshold swings.1 The usual strategy to mitigate quantum effects has been to increase device…
▽ More
An unresolved challenge facing electronics at a few-nm scale is that resistive channels start leaking due to quantum tunneling. This affects the performance of nanoscale transistors, with single-molecule devices displaying particularly low switching ratios and operating frequencies, combined with large subthreshold swings.1 The usual strategy to mitigate quantum effects has been to increase device complexity, but theory shows that if quantum effects are exploited correctly, they can simultaneously lower energy consumption and boost device performance.2-6 Here, we demonstrate experimentally how the performance of molecular transistors can be improved when the resistive channel contains two destructively-interfering waves. We use a zinc-porphyrin coupled to graphene electrodes in a three-terminal transistor device to demonstrate a >104 conductance-switching ratio, a subthreshold swing at the thermionic limit, a > 7 kHz operating frequency, and stability over >105 cycles. This performance is competitive with the best nanoelectronic transistors. We fully map the antiresonance interference features in conductance, reproduce the behaviour by density functional theory calculations, and trace back this high performance to the coupling between molecular orbitals and graphene edge states. These results demonstrate how the quantum nature of electron transmission at the nanoscale can enhance, rather than degrade, device performance, and highlight directions for future development of miniaturised electronics.
△ Less
Submitted 17 April, 2023;
originally announced April 2023.
-
Stability of long-sustained oscillations induced by electron tunneling
Authors:
Jorge Tabanera-Bravo,
Florian Vigneau,
Juliette Monsel,
Kushagra Aggarwal,
Léa Bresque,
Federico Fedele,
Federico Cerisola,
G. A. D. Briggs,
Janet Anders,
Alexia Aufèves,
Juan M. R. Parrondo,
Natalia Ares
Abstract:
Self-oscillations are the result of an efficient mechanism generating periodic motion from a constant power source. In quantum devices, these oscillations may arise due to the interaction between single electron dynamics and mechanical motion. We show that, due to the complexity of this mechanism, these self-oscillations may irrupt, vanish, or exhibit a bistable behaviour causing hysteresis cycles…
▽ More
Self-oscillations are the result of an efficient mechanism generating periodic motion from a constant power source. In quantum devices, these oscillations may arise due to the interaction between single electron dynamics and mechanical motion. We show that, due to the complexity of this mechanism, these self-oscillations may irrupt, vanish, or exhibit a bistable behaviour causing hysteresis cycles. We observe these hysteresis cycles and characterize the stability of different regimes in both single and double quantum dot configurations. In particular cases, we find these oscillations stable for over 20 seconds, many orders of magnitude above electronic and mechanical characteristic timescales, revealing the robustness of the mechanism at play.
△ Less
Submitted 26 March, 2024; v1 submitted 8 November, 2022;
originally announced November 2022.
-
Phase-Coherent Charge Transport through a Porphyrin Nanoribbon
Authors:
Zhixin Chen,
Jie-Ren Deng,
Songjun Hou,
Xinya Bian,
Jacob L. Swett,
Qingqing Wu,
Jonathan Baugh,
G. Andrew D. Briggs,
Jan A. Mol,
Colin J. Lambert,
Harry L. Anderson,
James O. Thomas
Abstract:
Quantum interference in nano-electronic devices could lead to reduced-energy computing and efficient thermoelectric energy harvesting. When devices are shrunk down to the molecular level it is still unclear to what extent electron transmission is phase coherent, as molecules usually act as scattering centres, without the possibility of showing particle-wave duality. Here we show electron transmiss…
▽ More
Quantum interference in nano-electronic devices could lead to reduced-energy computing and efficient thermoelectric energy harvesting. When devices are shrunk down to the molecular level it is still unclear to what extent electron transmission is phase coherent, as molecules usually act as scattering centres, without the possibility of showing particle-wave duality. Here we show electron transmission remains phase coherent in molecular porphyrin nanoribbons, synthesized with perfectly defined geometry, connected to graphene electrodes. The device acts as a graphene Fabry-Pérot interferometer, allowing direct probing of the transport mechanisms throughout several regimes, including the Kondo one. Electrostatic gating allows measurement of the molecular conductance in multiple molecular oxidation states, demonstrating a thousand-fold increase of the current by interference, and unravelling molecular and graphene transport pathways. These results demonstrate a platform for the use of interferometric effects in single-molecule junctions, opening up new avenues for studying quantum coherence in molecular electronic and spintronic devices.
△ Less
Submitted 5 September, 2022; v1 submitted 17 May, 2022;
originally announced May 2022.
-
Charge-state dependent vibrational relaxation in a single-molecule junction
Authors:
Xinya Bian,
Zhixin Chen,
Jakub K. Sowa,
Charalambos Evangeli,
Bart Limburg,
Jacob L. Swett,
Jonathan Baugh,
G. Andrew D. Briggs,
Harry L. Anderson,
Jan A. Mol,
James O. Thomas
Abstract:
The interplay between nuclear and electronic degrees of freedom strongly influences molecular charge transport. Herein, we report on transport through a porphyrin dimer molecule, weakly coupled to graphene electrodes, that displays sequential tunneling within the Coulomb-blockade regime. The sequential transport is initiated by current-induced phonon absorption and proceeds by rapid sequential tra…
▽ More
The interplay between nuclear and electronic degrees of freedom strongly influences molecular charge transport. Herein, we report on transport through a porphyrin dimer molecule, weakly coupled to graphene electrodes, that displays sequential tunneling within the Coulomb-blockade regime. The sequential transport is initiated by current-induced phonon absorption and proceeds by rapid sequential transport via a non-equilibrium vibrational distribution. We demonstrate this is possible only when the vibrational dissipation is slow relative to sequential tunneling rates, and obtain a lower bound for the vibrational relaxation time of 8 ns, a value that is dependent on the molecular charge state.
△ Less
Submitted 25 February, 2022;
originally announced February 2022.
-
Identifying Pauli spin blockade using deep learning
Authors:
Jonas Schuff,
Dominic T. Lennon,
Simon Geyer,
David L. Craig,
Federico Fedele,
Florian Vigneau,
Leon C. Camenzind,
Andreas V. Kuhlmann,
G. Andrew D. Briggs,
Dominik M. Zumbühl,
Dino Sejdinovic,
Natalia Ares
Abstract:
Pauli spin blockade (PSB) can be employed as a great resource for spin qubit initialisation and readout even at elevated temperatures but it can be difficult to identify. We present a machine learning algorithm capable of automatically identifying PSB using charge transport measurements. The scarcity of PSB data is circumvented by training the algorithm with simulated data and by using cross-devic…
▽ More
Pauli spin blockade (PSB) can be employed as a great resource for spin qubit initialisation and readout even at elevated temperatures but it can be difficult to identify. We present a machine learning algorithm capable of automatically identifying PSB using charge transport measurements. The scarcity of PSB data is circumvented by training the algorithm with simulated data and by using cross-device validation. We demonstrate our approach on a silicon field-effect transistor device and report an accuracy of 96% on different test devices, giving evidence that the approach is robust to device variability. The approach is expected to be employable across all types of quantum dot devices.
△ Less
Submitted 1 August, 2023; v1 submitted 1 February, 2022;
originally announced February 2022.
-
Constraints on the structure and seasonal variations of Triton's atmosphere from the 5 October 2017 stellar occultation and previous observations
Authors:
J. Marques Oliveira,
B. Sicardy,
A. R. Gomes-Júnior,
J. L. Ortiz,
D. F. Strobel,
T. Bertrand,
F. Forget,
E. Lellouch,
J. Desmars,
D. Bérard,
A. Doressoundiram,
J. Lecacheux,
R. Leiva,
E. Meza,
F. Roques,
D. Souami,
T. Widemann,
P. Santos-Sanz,
N. Morales,
R. Duffard,
E. Fernández-Valenzuela,
A. J. Castro-Tirado,
F. Braga-Ribas,
B. E. Morgado,
M. Assafin
, et al. (212 additional authors not shown)
Abstract:
A stellar occultation by Neptune's main satellite, Triton, was observed on 5 October 2017 from Europe, North Africa, and the USA. We derived 90 light curves from this event, 42 of which yielded a central flash detection.
We aimed at constraining Triton's atmospheric structure and the seasonal variations of its atmospheric pressure since the Voyager 2 epoch (1989). We also derived the shape of th…
▽ More
A stellar occultation by Neptune's main satellite, Triton, was observed on 5 October 2017 from Europe, North Africa, and the USA. We derived 90 light curves from this event, 42 of which yielded a central flash detection.
We aimed at constraining Triton's atmospheric structure and the seasonal variations of its atmospheric pressure since the Voyager 2 epoch (1989). We also derived the shape of the lower atmosphere from central flash analysis. We used Abel inversions and direct ray-tracing code to provide the density, pressure, and temperature profiles in the altitude range $\sim$8 km to $\sim$190 km, corresponding to pressure levels from 9 μbar down to a few nanobars.
Results. (i) A pressure of 1.18$\pm$0.03 μbar is found at a reference radius of 1400 km (47 km altitude). (ii) A new analysis of the Voyager 2 radio science occultation shows that this is consistent with an extrapolation of pressure down to the surface pressure obtained in 1989. (iii) A survey of occultations obtained between 1989 and 2017 suggests that an enhancement in surface pressure as reported during the 1990s might be real, but debatable, due to very few high S/N light curves and data accessible for reanalysis. The volatile transport model analysed supports a moderate increase in surface pressure, with a maximum value around 2005-2015 no higher than 23 μbar. The pressures observed in 1995-1997 and 2017 appear mutually inconsistent with the volatile transport model presented here. (iv) The central flash structure does not show evidence of an atmospheric distortion. We find an upper limit of 0.0011 for the apparent oblateness of the atmosphere near the 8 km altitude.
△ Less
Submitted 25 January, 2022;
originally announced January 2022.
-
Bridging the reality gap in quantum devices with physics-aware machine learning
Authors:
D. L. Craig,
H. Moon,
F. Fedele,
D. T. Lennon,
B. Van Straaten,
F. Vigneau,
L. C. Camenzind,
D. M. Zumbühl,
G. A. D. Briggs,
M. A. Osborne,
D. Sejdinovic,
N. Ares
Abstract:
The discrepancies between reality and simulation impede the optimisation and scalability of solid-state quantum devices. Disorder induced by the unpredictable distribution of material defects is one of the major contributions to the reality gap. We bridge this gap using physics-aware machine learning, in particular, using an approach combining a physical model, deep learning, Gaussian random field…
▽ More
The discrepancies between reality and simulation impede the optimisation and scalability of solid-state quantum devices. Disorder induced by the unpredictable distribution of material defects is one of the major contributions to the reality gap. We bridge this gap using physics-aware machine learning, in particular, using an approach combining a physical model, deep learning, Gaussian random field, and Bayesian inference. This approach has enabled us to infer the disorder potential of a nanoscale electronic device from electron transport data. This inference is validated by verifying the algorithm's predictions about the gate voltage values required for a laterally-defined quantum dot device in AlGaAs/GaAs to produce current features corresponding to a double quantum dot regime.
△ Less
Submitted 22 November, 2021;
originally announced November 2021.
-
Cross-architecture Tuning of Silicon and SiGe-based Quantum Devices Using Machine Learning
Authors:
B. Severin,
D. T. Lennon,
L. C. Camenzind,
F. Vigneau,
F. Fedele,
D. Jirovec,
A. Ballabio,
D. Chrastina,
G. Isella,
M. de Kruijf,
M. J. Carballido,
S. Svab,
A. V. Kuhlmann,
F. R. Braakman,
S. Geyer,
F. N. M. Froning,
H. Moon,
M. A. Osborne,
D. Sejdinovic,
G. Katsaros,
D. M. Zumbühl,
G. A. D. Briggs,
N. Ares
Abstract:
The potential of Si and SiGe-based devices for the scaling of quantum circuits is tainted by device variability. Each device needs to be tuned to operation conditions. We give a key step towards tackling this variability with an algorithm that, without modification, is capable of tuning a 4-gate Si FinFET, a 5-gate GeSi nanowire and a 7-gate SiGe heterostructure double quantum dot device from scra…
▽ More
The potential of Si and SiGe-based devices for the scaling of quantum circuits is tainted by device variability. Each device needs to be tuned to operation conditions. We give a key step towards tackling this variability with an algorithm that, without modification, is capable of tuning a 4-gate Si FinFET, a 5-gate GeSi nanowire and a 7-gate SiGe heterostructure double quantum dot device from scratch. We achieve tuning times of 30, 10, and 92 minutes, respectively. The algorithm also provides insight into the parameter space landscape for each of these devices. These results show that overarching solutions for the tuning of quantum devices are enabled by machine learning.
△ Less
Submitted 27 July, 2021;
originally announced July 2021.
-
Single-electron transport in a molecular Hubbard dimer
Authors:
James O. Thomas,
Jakub K. Sowa,
Bart Limburg,
Xinya Bian,
Charalambos Evangeli,
Jacob L. Swett,
Sumit Tewari,
Jonathan Baugh,
George C. Schatz,
G. Andrew D. Briggs,
Harry L. Anderson,
Jan A. Mol
Abstract:
Many-body electron interactions are at the heart of chemistry and solid-state physics. Understanding these interactions is crucial for the development of molecular-scale quantum and nanoelectronic devices. Here, we investigate single-electron tunneling through an edge-fused porphyrin oligomer and demonstrate that its transport behavior is well described by the Hubbard dimer model. This allows us t…
▽ More
Many-body electron interactions are at the heart of chemistry and solid-state physics. Understanding these interactions is crucial for the development of molecular-scale quantum and nanoelectronic devices. Here, we investigate single-electron tunneling through an edge-fused porphyrin oligomer and demonstrate that its transport behavior is well described by the Hubbard dimer model. This allows us to study the role of electron-electron interactions in the transport setting. In particular, we empirically determine the molecule's on-site and inter-site electron-electron repulsion energies, which are in good agreement with density functional calculations, and establish the molecular electronic structure within various charge states. The gate-dependent rectification behavior is used to further confirm the selection rules and state degeneracies resulting from the Hubbard model. We therefore demonstrate that current flow through the molecule is governed by a non-trivial set of vibrationally coupled electronic transitions between various many-body states, and experimentally confirm the importance of electron-electron interactions in single-molecule devices.
△ Less
Submitted 2 May, 2021;
originally announced May 2021.
-
Understanding Electrical Conduction and Nanopore Formation During Controlled Breakdown
Authors:
Jasper P. Fried,
Jacob L. Swett,
Binoy Paulose Nadappuram,
Aleksandra Fedosyuk,
Pedro Miguel Sousa,
Dayrl P. Briggs,
Aleksandar P. Ivanov,
Joshua B. Edel,
Jan A. Mol,
James R. Yates
Abstract:
Controlled breakdown has recently emerged as a highly appealing technique to fabricate solid-state nanopores for a wide range of biosensing applications. This technique relies on applying an electric field of approximately 0.6-1 V/nm across the membrane to induce a current, and eventually, breakdown of the dielectric. However, a detailed description of how electrical conduction through the dielect…
▽ More
Controlled breakdown has recently emerged as a highly appealing technique to fabricate solid-state nanopores for a wide range of biosensing applications. This technique relies on applying an electric field of approximately 0.6-1 V/nm across the membrane to induce a current, and eventually, breakdown of the dielectric. However, a detailed description of how electrical conduction through the dielectric occurs during controlled breakdown has not yet been reported. Here, we study electrical conduction and nanopore formation in SiN$_x$ membranes during controlled breakdown. We show that depending on the membrane stoichiometry, electrical conduction is limited by either oxidation reactions that must occur at the membrane-electrolyte interface (Si-rich SiN$_x$), or electron transport across the dielectric (stoichiometric Si$_3$N$_4$). We provide several important implications resulting from understanding this process which will aid in further develo** controlled breakdown in the coming years, particularly for extending this technique to integrate nanopores with on-chip nanostructures.
△ Less
Submitted 30 March, 2021;
originally announced March 2021.
-
Radio-frequency characterization of a supercurrent transistor made from a carbon nanotube
Authors:
M. Mergenthaler,
F. J. Schupp,
A. Nersisyan,
N. Ares,
A. Baumgartner,
C. Schönenberger,
G. A. D. Briggs,
P. J. Leek,
E. A. Laird
Abstract:
A supercurrent transistor is a superconductor-semiconductor hybrid device in which the Josephson supercurrent is switched on and off using a gate voltage. While such devices have been studied using DC transport, radio-frequency measurements allow for more sensitive and faster experiments. Here a supercurrent transistor made from a carbon nanotube is measured simultaneously via DC conductance and r…
▽ More
A supercurrent transistor is a superconductor-semiconductor hybrid device in which the Josephson supercurrent is switched on and off using a gate voltage. While such devices have been studied using DC transport, radio-frequency measurements allow for more sensitive and faster experiments. Here a supercurrent transistor made from a carbon nanotube is measured simultaneously via DC conductance and radio-frequency reflectometry. The radio-frequency measurement resolves all the main features of the conductance data across a wide range of bias and gate voltage, and many of these features are seen more clearly. These results are promising for measuring other kinds of hybrid superconducting devices, in particular for detecting the reactive component of the impedance, which a DC measurement can never detect.
△ Less
Submitted 30 March, 2021;
originally announced March 2021.
-
Ultrastrong coupling between electron tunneling and mechanical motion
Authors:
Florian Vigneau,
Juliette Monsel,
Jorge Tabanera,
Kushagra Aggarwal,
Léa Bresque,
Federico Fedele,
G. A. D Briggs,
Janet Anders,
Juan M. R. Parrondo,
Alexia Auffèves,
Natalia Ares
Abstract:
The ultrastrong coupling of single-electron tunneling and nanomechanical motion opens exciting opportunities to explore fundamental questions and develop new platforms for quantum technologies. We have measured and modeled this electromechanical coupling in a fully-suspended carbon nanotube device and report a ratio of $g_\mathrm{m}/ω_\mathrm{m} = 2.72 \pm 0.14$, where…
▽ More
The ultrastrong coupling of single-electron tunneling and nanomechanical motion opens exciting opportunities to explore fundamental questions and develop new platforms for quantum technologies. We have measured and modeled this electromechanical coupling in a fully-suspended carbon nanotube device and report a ratio of $g_\mathrm{m}/ω_\mathrm{m} = 2.72 \pm 0.14$, where $g_\mathrm{m}/2π= 0.80\pm 0.04$ GHz is the coupling strength and $ω_\mathrm{m}/2π=294.5$ MHz is the mechanical resonance frequency. This is well within the ultrastrong coupling regime and the highest among all other electromechanical platforms. We show that, although this regime was present in similar fully-suspended carbon nanotube devices, it went unnoticed. Even higher ratios could be achieved with improvement on device design.
△ Less
Submitted 6 October, 2022; v1 submitted 28 March, 2021;
originally announced March 2021.
-
Deep Reinforcement Learning for Efficient Measurement of Quantum Devices
Authors:
V. Nguyen,
S. B. Orbell,
D. T. Lennon,
H. Moon,
F. Vigneau,
L. C. Camenzind,
L. Yu,
D. M. Zumbühl,
G. A. D. Briggs,
M. A. Osborne,
D. Sejdinovic,
N. Ares
Abstract:
Deep reinforcement learning is an emerging machine learning approach which can teach a computer to learn from their actions and rewards similar to the way humans learn from experience. It offers many advantages in automating decision processes to navigate large parameter spaces. This paper proposes a novel approach to the efficient measurement of quantum devices based on deep reinforcement learnin…
▽ More
Deep reinforcement learning is an emerging machine learning approach which can teach a computer to learn from their actions and rewards similar to the way humans learn from experience. It offers many advantages in automating decision processes to navigate large parameter spaces. This paper proposes a novel approach to the efficient measurement of quantum devices based on deep reinforcement learning. We focus on double quantum dot devices, demonstrating the fully automatic identification of specific transport features called bias triangles. Measurements targeting these features are difficult to automate, since bias triangles are found in otherwise featureless regions of the parameter space. Our algorithm identifies bias triangles in a mean time of less than 30 minutes, and sometimes as little as 1 minute. This approach, based on dueling deep Q-networks, can be adapted to a broad range of devices and target transport features. This is a crucial demonstration of the utility of deep reinforcement learning for decision making in the measurement and operation of quantum devices.
△ Less
Submitted 30 September, 2020;
originally announced September 2020.
-
Measuring the thermodynamic cost of timekee**
Authors:
A. N. Pearson,
Y. Guryanova,
P. Erker,
E. A. Laird,
G. A. D. Briggs,
M. Huber,
N. Ares
Abstract:
All clocks, in some form or another, use the evolution of nature towards higher entropy states to quantify the passage of time. Due to the statistical nature of the second law and corresponding entropy flows, fluctuations fundamentally limit the performance of any clock. This suggests a deep relation between the increase in entropy and the quality of clock ticks. Indeed, minimal models for autonom…
▽ More
All clocks, in some form or another, use the evolution of nature towards higher entropy states to quantify the passage of time. Due to the statistical nature of the second law and corresponding entropy flows, fluctuations fundamentally limit the performance of any clock. This suggests a deep relation between the increase in entropy and the quality of clock ticks. Indeed, minimal models for autonomous clocks in the quantum realm revealed that a linear relation can be derived, where for a limited regime every bit of entropy linearly increases the accuracy of quantum clocks. But can such a linear relation persist as we move towards a more classical system? We answer this in the affirmative by presenting the first experimental investigation of this thermodynamic relation in a nanoscale clock. We stochastically drive a nanometer-thick membrane and read out its displacement with a radio-frequency cavity, allowing us to identify the ticks of a clock. We show theoretically that the maximum possible accuracy for this classical clock is proportional to the entropy created per tick, similar to the known limit for a weakly coupled quantum clock but with a different proportionality constant. We measure both the accuracy and the entropy. Once non-thermal noise is accounted for, we find that there is a linear relation between accuracy and entropy and that the clock operates within an order of magnitude of the theoretical bound.
△ Less
Submitted 15 June, 2020;
originally announced June 2020.
-
Quantum device fine-tuning using unsupervised embedding learning
Authors:
N. M. van Esbroeck,
D. T. Lennon,
H. Moon,
V. Nguyen,
F. Vigneau,
L. C. Camenzind,
L. Yu,
D. M. Zumbühl,
G. A. D. Briggs,
D. Sejdinovic,
N. Ares
Abstract:
Quantum devices with a large number of gate electrodes allow for precise control of device parameters. This capability is hard to fully exploit due to the complex dependence of these parameters on applied gate voltages. We experimentally demonstrate an algorithm capable of fine-tuning several device parameters at once. The algorithm acquires a measurement and assigns it a score using a variational…
▽ More
Quantum devices with a large number of gate electrodes allow for precise control of device parameters. This capability is hard to fully exploit due to the complex dependence of these parameters on applied gate voltages. We experimentally demonstrate an algorithm capable of fine-tuning several device parameters at once. The algorithm acquires a measurement and assigns it a score using a variational auto-encoder. Gate voltage settings are set to optimise this score in real-time in an unsupervised fashion. We report fine-tuning times of a double quantum dot device within approximately 40 min.
△ Less
Submitted 13 January, 2020;
originally announced January 2020.
-
Machine learning enables completely automatic tuning of a quantum device faster than human experts
Authors:
H. Moon,
D. T. Lennon,
J. Kirkpatrick,
N. M. van Esbroeck,
L. C. Camenzind,
Liuqi Yu,
F. Vigneau,
D. M. Zumbühl,
G. A. D. Briggs,
M. A Osborne,
D. Sejdinovic,
E. A. Laird,
N. Ares
Abstract:
Device variability is a bottleneck for the scalability of semiconductor quantum devices. Increasing device control comes at the cost of a large parameter space that has to be explored in order to find the optimal operating conditions. We demonstrate a statistical tuning algorithm that navigates this entire parameter space, using just a few modelling assumptions, in the search for specific electron…
▽ More
Device variability is a bottleneck for the scalability of semiconductor quantum devices. Increasing device control comes at the cost of a large parameter space that has to be explored in order to find the optimal operating conditions. We demonstrate a statistical tuning algorithm that navigates this entire parameter space, using just a few modelling assumptions, in the search for specific electron transport features. We focused on gate-defined quantum dot devices, demonstrating fully automated tuning of two different devices to double quantum dot regimes in an up to eight-dimensional gate voltage space. We considered a parameter space defined by the maximum range of each gate voltage in these devices, demonstrating expected tuning in under 70 minutes. This performance exceeded a human benchmark, although we recognise that there is room for improvement in the performance of both humans and machines. Our approach is approximately 180 times faster than a pure random search of the parameter space, and it is readily applicable to different material systems and device architectures. With an efficient navigation of the gate voltage space we are able to give a quantitative measurement of device variability, from one device to another and after a thermal cycle of a device. This is a key demonstration of the use of machine learning techniques to explore and optimise the parameter space of quantum devices and overcome the challenge of device variability.
△ Less
Submitted 8 January, 2020;
originally announced January 2020.
-
The role of metallic leads and electronic degeneracies in thermoelectric power generation in quantum dots
Authors:
Achim Harzheim,
Jakub K. sowa,
Jacob L. Swett,
G. Andrew D. Briggs,
Jan A. Mol,
Pascal Gehring
Abstract:
The power factor of a thermoelectric device is a measure of the heat-to-energy conversion efficiency in nanoscopic devices. Yet, even as interest in low-dimensional thermoelectric materials has increased, experimental research on what influences the power factor in these systems is scarce. Here, we present a detailed thermoelectric study of graphene quantum dot devices. We show that spin-degenerac…
▽ More
The power factor of a thermoelectric device is a measure of the heat-to-energy conversion efficiency in nanoscopic devices. Yet, even as interest in low-dimensional thermoelectric materials has increased, experimental research on what influences the power factor in these systems is scarce. Here, we present a detailed thermoelectric study of graphene quantum dot devices. We show that spin-degeneracy of the quantum dot states has a significant impact on the zero-bias conductance of the device and leads to an increase of the power factor. Conversely, we demonstrate that non-ideal heat exchange within the leads can suppress the power factor near the charge degeneracy point and non-trivially influences its temperature dependence.
△ Less
Submitted 12 June, 2019;
originally announced June 2019.
-
Realization of a Carbon-Nanotube-Based Superconducting Qubit
Authors:
Matthias Mergenthaler,
Ani Nersisyan,
Andrew Patterson,
Martina Esposito,
Andreas Baumgartner,
Christian Schönenberger,
G. Andrew D. Briggs,
Edward A. Laird,
Peter J. Leek
Abstract:
Hybrid circuit quantum electrodynamics (QED) involves the study of coherent quantum physics in solid state systems via their interactions with superconducting microwave circuits. Here we present an implementation of a hybrid superconducting qubit that employs a carbon nanotube as a Josephson junction. We realize the junction by contacting a carbon nanotube with a superconducting Pd/Al bi-layer, an…
▽ More
Hybrid circuit quantum electrodynamics (QED) involves the study of coherent quantum physics in solid state systems via their interactions with superconducting microwave circuits. Here we present an implementation of a hybrid superconducting qubit that employs a carbon nanotube as a Josephson junction. We realize the junction by contacting a carbon nanotube with a superconducting Pd/Al bi-layer, and implement voltage tunability of the qubit frequency using a local electrostatic gate. We demonstrate strong dispersive coupling to a coplanar waveguide resonator via observation of a resonator frequency shift dependent on applied gate voltage. We extract qubit parameters from spectroscopy using dispersive readout and find qubit relaxation and coherence times in the range of $10-200~\rm{ns}$.
△ Less
Submitted 22 April, 2019;
originally announced April 2019.
-
A coherent nanomechanical oscillator driven by single-electron tunnelling
Authors:
Yutian Wen,
N. Ares,
F. J. Schupp,
T. Pei,
G. A. D. Briggs,
E. A. Laird
Abstract:
A single-electron transistor incorporated as part of a nanomechanical resonator represents an extreme limit of electron-phonon coupling. While it allows for fast and sensitive electromechanical measurements, it also introduces backaction forces from electron tunnelling which randomly perturb the mechanical state. Despite the stochastic nature of this backaction, under conditions of strong coupling…
▽ More
A single-electron transistor incorporated as part of a nanomechanical resonator represents an extreme limit of electron-phonon coupling. While it allows for fast and sensitive electromechanical measurements, it also introduces backaction forces from electron tunnelling which randomly perturb the mechanical state. Despite the stochastic nature of this backaction, under conditions of strong coupling it is predicted to create self-sustaining coherent mechanical oscillations. Here, we verify this prediction using time-resolved measurements of a vibrating carbon nanotube transistor. This electromechanical oscillator has intriguing similarities with a laser. The single-electron transistor, pumped by an electrical bias, acts as a gain medium while the resonator acts as a phonon cavity. Despite the unconventional operating principle, which does not involve stimulated emission, we confirm that the output is coherent, and demonstrate other laser behaviour including injection locking and frequency narrowing through feedback.
△ Less
Submitted 11 March, 2019;
originally announced March 2019.
-
Radio-frequency optomechanical characterization of a silicon nitride drum
Authors:
A. N. Pearson,
K. E. Khosla,
M. Mergenthaler,
G. A. D. Briggs,
E. A. Laird,
N. Ares
Abstract:
On-chip actuation and readout of mechanical motion is key to characterize mechanical resonators and exploit them for new applications. We capacitively couple a silicon nitride membrane to an off resonant radio-frequency cavity formed by a lumped element circuit. Despite a low cavity quality factor (Q$_\mathrm{E}\approx$ 7.4) and off resonant, room temperature operation, we are able to parametrize…
▽ More
On-chip actuation and readout of mechanical motion is key to characterize mechanical resonators and exploit them for new applications. We capacitively couple a silicon nitride membrane to an off resonant radio-frequency cavity formed by a lumped element circuit. Despite a low cavity quality factor (Q$_\mathrm{E}\approx$ 7.4) and off resonant, room temperature operation, we are able to parametrize several mechanical modes and estimate their optomechanical coupling strengths. This enables real-time measurements of the membrane's driven motion and fast characterization without requiring a superconducting cavity, thereby eliminating the need for cryogenic cooling. Finally, we observe optomechanically induced transparency and absorption, crucial for a number of applications including sensitive metrology, ground state cooling of mechanical motion and slowing of light.
△ Less
Submitted 20 July, 2020; v1 submitted 4 March, 2019;
originally announced March 2019.
-
Understanding resonant charge transport through weakly coupled single-molecule junctions
Authors:
James O. Thomas,
Bart Limburg,
Jakub K. Sowa,
Kyle Willick,
Jonathan Baugh,
G. Andrew D. Briggs,
Erik M. Gauger,
Harry L. Anderson,
Jan A. Mol
Abstract:
Off-resonant charge transport through molecular junctions has been extensively studied since the advent of single-molecule electronics and it is now well understood within the framework of the non-interacting Landauer approach. Conversely, gaining a qualitative and quantitative understanding of the resonant transport regime has proven more elusive. Here, we study resonant charge transport through…
▽ More
Off-resonant charge transport through molecular junctions has been extensively studied since the advent of single-molecule electronics and it is now well understood within the framework of the non-interacting Landauer approach. Conversely, gaining a qualitative and quantitative understanding of the resonant transport regime has proven more elusive. Here, we study resonant charge transport through graphene-based zinc-porphyrin junctions. We experimentally demonstrate an inadequacy of the non-interacting Landauer theory as well as the conventional single-mode Franck-Condon model. Instead, we model the overall charge transport as a sequence of non-adiabatic electron transfers, the rates of which depend on both outer and inner-sphere vibrational interactions. We show that the transport properties of our molecular junctions are determined by a combination of electron-electron and electron-vibrational coupling, and are sensitive to the interactions with the wider local environment. Furthermore, we assess the importance of nuclear tunnelling and examine the suitability of semi-classical Marcus theory as a description of charge transport in molecular devices.
△ Less
Submitted 1 October, 2019; v1 submitted 18 December, 2018;
originally announced December 2018.
-
Geometrically Enhanced Thermoelectric Effects in Graphene Nanoconstrictions
Authors:
Achim Harzheim,
Jean Spiece,
Charalambos Evangeli,
Edward McCann,
Vladimir Falko,
Yuewen Sheng,
Jamie H. Warner,
G. Andrew D. Briggs,
Jan A. Mol,
Pascal Gehring,
Oleg V. Kolosov
Abstract:
The influence of nanostructuring and quantum confinement on the thermoelectric properties of materials has been extensively studied. While this has made possible multiple breakthroughs in the achievable figure of merit, classical confinement, and its effect on the local Seebeck coefficient has mostly been neglected, as has the Peltier effect in general due to the complexity of measuring small temp…
▽ More
The influence of nanostructuring and quantum confinement on the thermoelectric properties of materials has been extensively studied. While this has made possible multiple breakthroughs in the achievable figure of merit, classical confinement, and its effect on the local Seebeck coefficient has mostly been neglected, as has the Peltier effect in general due to the complexity of measuring small temperature gradients locally. Here we report that reducing the width of a graphene channel to 100 nm changes the Seebeck coefficient by orders of magnitude. Using a scanning thermal microscope allows us to probe the local temperature of electrically contacted graphene two-terminal devices or to locally heat the sample. We show that constrictions in mono- and bilayer graphene facilitate a spatially correlated gradient in the Seebeck and Peltier coefficient, as evidenced by the pronounced thermovoltage $V_{th}$ and heating/cooling response $ΔT_{Peltier}$, respectively. This geometry dependent effect, which has not been reported previously in 2D materials, has important implications for measurements of patterned nanostructures in graphene and points to novel solutions for effective thermal management in electronic graphene devices or concepts for single material thermocouples.
△ Less
Submitted 29 November, 2018;
originally announced November 2018.
-
Efficiently measuring a quantum device using machine learning
Authors:
D. T. Lennon,
H. Moon,
L. C. Camenzind,
Liuqi Yu,
D. M. Zumbühl,
G. A. D. Briggs,
M. A. Osborne,
E. A. Laird,
N. Ares
Abstract:
Scalable quantum technologies will present challenges for characterizing and tuning quantum devices. This is a time-consuming activity, and as the size of quantum systems increases, this task will become intractable without the aid of automation. We present measurements on a quantum dot device performed by a machine learning algorithm. The algorithm selects the most informative measurements to per…
▽ More
Scalable quantum technologies will present challenges for characterizing and tuning quantum devices. This is a time-consuming activity, and as the size of quantum systems increases, this task will become intractable without the aid of automation. We present measurements on a quantum dot device performed by a machine learning algorithm. The algorithm selects the most informative measurements to perform next using information theory and a probabilistic deep-generative model, the latter capable of generating multiple full-resolution reconstructions from scattered partial measurements. We demonstrate, for two different measurement configurations, that the algorithm outperforms standard grid scan techniques, reducing the number of measurements required by up to 4 times and the measurement time by 3.7 times. Our contribution goes beyond the use of machine learning for data search and analysis, and instead presents the use of algorithms to automate measurement. This work lays the foundation for automated control of large quantum circuits.
△ Less
Submitted 23 October, 2018;
originally announced October 2018.
-
Radio-frequency reflectometry of a quantum dot using an ultra-low-noise SQUID amplifier
Authors:
F. J. Schupp,
F. Vigneau,
Y. Wen,
A. Mavalankar,
J. Griffiths,
G. A. C. Jones,
I. Farrer,
D. A. Ritchie,
C. G. Smith,
L. C. Camenzind,
L. Yu,
D. M. Zumbühl,
G. A. D. Briggs,
N. Ares,
E. A. Laird
Abstract:
Fault-tolerant spin-based quantum computers will require fast and accurate qubit readout. This can be achieved using radio-frequency reflectometry given sufficient sensitivity to the change in quantum capacitance associated with the qubit states. Here, we demonstrate a 23-fold improvement in capacitance sensitivity by supplementing a cryogenic semiconductor amplifier with a SQUID preamplifier. The…
▽ More
Fault-tolerant spin-based quantum computers will require fast and accurate qubit readout. This can be achieved using radio-frequency reflectometry given sufficient sensitivity to the change in quantum capacitance associated with the qubit states. Here, we demonstrate a 23-fold improvement in capacitance sensitivity by supplementing a cryogenic semiconductor amplifier with a SQUID preamplifier. The SQUID amplifier operates at a frequency near 200 MHz and achieves a noise temperature below 600 mK when integrated into a reflectometry circuit, which is within a factor 120 of the quantum limit. It enables a record sensitivity to capacitance of 0.07 aF/\sqrt{Hz}. The setup is used to acquire charge stability diagrams of a gate-defined double quantum dot in a short time with a signal-to-noise ration of about 38 in 1 microsecond of integration time.
△ Less
Submitted 29 June, 2020; v1 submitted 12 October, 2018;
originally announced October 2018.
-
Phonon-induced multi-color correlations in hBN single-photon emitters
Authors:
Matthew Feldman,
Alex Puretzky,
Lucas Lindsay,
Ethan Tucker,
Dayrl Briggs,
Philip Evans,
Richard Haglund,
Benjamin Lawrie
Abstract:
Color centers in hexagonal boron nitride have shown enormous promise as single-photon sources, but a clear understanding of electron-phonon interaction dynamics is critical to their development for quantum communications or quantum simulations. We demonstrate photon antibunching in the filtered auto- and cross-correlations $g^{(2)}_{lm}(τ)$ between zero-, one- and two-phonon replicas of defect lum…
▽ More
Color centers in hexagonal boron nitride have shown enormous promise as single-photon sources, but a clear understanding of electron-phonon interaction dynamics is critical to their development for quantum communications or quantum simulations. We demonstrate photon antibunching in the filtered auto- and cross-correlations $g^{(2)}_{lm}(τ)$ between zero-, one- and two-phonon replicas of defect luminescence. Moreover, we combine autocorrelation measurements with a violation of the Cauchy-Schwarz inequality in the filtered cross-correlation measurements to distinguish a low quantum-efficiency defect from phonon replicas of a bright defect. With no background correction, we observe single photon purity of $g^{(2)}(0)=0.20$ in a phonon replica and cross-spectral correlations of $g^{(2)}_{lm}(0)=0.18$ between a phonon replica and the zero phonon line. These results illustrate a coherent interface between visible photons and mid-infrared phonons and provide a clear path toward control of photon-phonon entanglement in 2D materials.
△ Less
Submitted 21 August, 2018;
originally announced August 2018.
-
Measuring carbon nanotube vibrations using a single-electron transistor as a fast linear amplifier
Authors:
Yutian Wen,
N. Ares,
T. Pei,
G. A. D. Briggs,
E. A. Laird
Abstract:
We demonstrate sensitive and fast electrical measurements of a carbon nanotube mechanical resonator. The nanotube is configured as a single-electron transistor, whose conductance is a sensitive transducer for its own displacement. Using an impedance-matching circuit followed by a cryogenic amplifier, the vibrations can be monitored in real time. The sensitivity of this continuous displacement meas…
▽ More
We demonstrate sensitive and fast electrical measurements of a carbon nanotube mechanical resonator. The nanotube is configured as a single-electron transistor, whose conductance is a sensitive transducer for its own displacement. Using an impedance-matching circuit followed by a cryogenic amplifier, the vibrations can be monitored in real time. The sensitivity of this continuous displacement measurement approaches within a factor 470 of the standard quantum limit.
△ Less
Submitted 23 October, 2018; v1 submitted 14 August, 2018;
originally announced August 2018.
-
Seeing opportunity in every difficulty: protecting information with weak value techniques
Authors:
George C. Knee,
G. Andrew D. Briggs
Abstract:
A weak value is an effective description of the influence of a pre and post-selected 'principal' system on another 'meter' system to which it is weakly coupled. Weak values can describe anomalously large deflections of the meter, and deflections in otherwise unperturbed variables: this motivates investigation of the potential benefits of the protocol in precision metrology. We present a visual int…
▽ More
A weak value is an effective description of the influence of a pre and post-selected 'principal' system on another 'meter' system to which it is weakly coupled. Weak values can describe anomalously large deflections of the meter, and deflections in otherwise unperturbed variables: this motivates investigation of the potential benefits of the protocol in precision metrology. We present a visual interpretation of weak value experiments in phase space, enabling an evaluation of the effects of three types of detector noise as 'Fisher information efficiency' functions. These functions depend on the marginal distribution of the Wigner function of the meter, and give a unified view of the weak value protocol as a way of protecting Fisher information from detector imperfections. This approach explains why weak value techniques are more effective for avoiding detector saturation than for mitigating detector jitter or pixelation.
△ Less
Submitted 10 August, 2018;
originally announced August 2018.
-
Beyond Marcus theory and the Landauer-Büttiker approach in molecular junctions: A unified framework
Authors:
Jakub K. Sowa,
Jan A. Mol,
G. Andrew D. Briggs,
Erik M. Gauger
Abstract:
Charge transport through molecular junctions is often described either as a purely coherent or a purely classical phenomenon, and described using the Landauer-Büttiker formalism or Marcus theory, respectively. Using a generalised quantum master equation, we here derive an expression for current through a molecular junction modelled as a single electronic level coupled to a collection of thermalise…
▽ More
Charge transport through molecular junctions is often described either as a purely coherent or a purely classical phenomenon, and described using the Landauer-Büttiker formalism or Marcus theory, respectively. Using a generalised quantum master equation, we here derive an expression for current through a molecular junction modelled as a single electronic level coupled to a collection of thermalised vibrational modes. We demonstrate that the aforementioned theoretical approaches can be viewed as two limiting cases of this more general expression, and present a series of approximations of this result valid at higher temperatures. We find that Marcus theory is often insufficient in describing the molecular charge transport characteristics and gives rise to a number of artefacts, especially at lower temperatures. Alternative expressions, retaining its mathematical simplicity but rectifying those shortcomings, are suggested. In particular, we show how lifetime broadening can be consistently incorporated into Marcus theory, and we derive a low-temperature correction to the semi-classical Marcus hop** rates. Our results are applied to examples building on phenomenological as well as microscopically-motivated electron-vibrational coupling. We expect them to be particularly useful in experimental studies of charge transport through single-molecule junctions as well as self-assembled monolayers.
△ Less
Submitted 29 September, 2018; v1 submitted 23 July, 2018;
originally announced July 2018.
-
Quantum Interference in Silicon 1D Quasi-Ballistic Junctionless Nanowire Field Effect Transistors
Authors:
Felix J. Schupp,
Muhammad M. Mirza,
Donald A. MacLaren,
G. Andrew D. Briggs,
Douglas J. Paul,
Jan A. Mol
Abstract:
We investigate the low temperature transport in 8 nm diameter Si junctionless nanowire field effect transistors fabricated by top down techniques with a wrap-around gate and two different activated do** densities. First we extract the intrinsic gate capacitance of the device geometry from a device that shows Coulomb blockade at 13 mK with over 500 Coulomb peaks across a gate voltage range of 6 V…
▽ More
We investigate the low temperature transport in 8 nm diameter Si junctionless nanowire field effect transistors fabricated by top down techniques with a wrap-around gate and two different activated do** densities. First we extract the intrinsic gate capacitance of the device geometry from a device that shows Coulomb blockade at 13 mK with over 500 Coulomb peaks across a gate voltage range of 6 V indicating the formation of a single island in the entire nanowire channel. In two other devices, doped Si:P $4\times10^{19}\,\text{cm}^{-3}$ and $2\times10^{20}\,\text{cm}^{-3}$, we observe quantum interference and use the extracted gate coupling to determine the dominant energy scale and the corresponding mean-free paths. For the higher doped device the analysis yields a mean free path of $4\pm2\,\text{nm}$, which is on the order of the average dopant spacing and suggests scattering on unactivated or activated dopants. For the device with an activated dopant density of $4\times10^{19}\,\text{cm}^{-3}$ the quantum interference effects suggest a mean free path of $10\pm2\,\text{nm}$, which is comparable to the nanowire width, and thus quasi-ballistic transport. A temperature dependent analysis of Universal Conductance Fluctuations suggests a coherence length above the nanowire length for temperatures below 1.9 K and decoherence from 1D electron-electron interactions for higher temperatures. The mobility is limited by scattering on impurities rather than the expected surface roughness scattering for nanowires with diameters larger or comparable to the Fermi wavelength. Our measurements therefore provide insight into the performance limitations from dominant scattering and dephasing mechanisms in technologically relevant silicon device geometries.
△ Less
Submitted 20 February, 2018;
originally announced February 2018.
-
Spiro-Conjugated Molecular Junctions: between Jahn-Teller Distortion and Destructive Quantum Interference
Authors:
Jakub K. Sowa,
Jan A. Mol,
G. Andrew D. Briggs,
Erik M. Gauger
Abstract:
The quest for molecular structures exhibiting strong quantum interference effects in the transport setting has long been on the forefront of chemical research. Here, we establish theoretically that the unusual geometry of spiro-conjugated systems gives rise to complete destructive interference in the resonant-transport regime. This results in a current blockade of the type not present in meta-conn…
▽ More
The quest for molecular structures exhibiting strong quantum interference effects in the transport setting has long been on the forefront of chemical research. Here, we establish theoretically that the unusual geometry of spiro-conjugated systems gives rise to complete destructive interference in the resonant-transport regime. This results in a current blockade of the type not present in meta-connected benzene or similar molecular structures. We further show that these systems can undergo a transport-driven Jahn-Teller distortion which can lift the aforementioned destructive-interference effects. The overall transport characteristics is determined by the interplay between the two phenomena. Spiro-conjugated systems may therefore serve as a novel platform for investigations of quantum interference and vibronic effects in the charge transport setting. The potential to control quantum interference in these systems can also turn them into attractive components in designing functional molecular circuits.
△ Less
Submitted 19 February, 2018;
originally announced February 2018.
-
High pressure electron spin resonance of the endohedral fullerene $^{15}\mathrm{N@C}_{60}$
Authors:
R. T. Harding,
A. Folli,
J. Zhou,
G. A. D. Briggs,
K. Porfyrakis,
E. A. Laird
Abstract:
We measure the electron spin resonance spectrum of the endohedral fullerene molecule $^{15}\mathrm{N@C}_{60}$ at pressures ranging from atmospheric pressure to 0.25 GPa, and find that the hyperfine coupling increases linearly with pressure. We present a model based on van der Waals interactions, which accounts for this increase via compression of the fullerene cage and consequent admixture of orbi…
▽ More
We measure the electron spin resonance spectrum of the endohedral fullerene molecule $^{15}\mathrm{N@C}_{60}$ at pressures ranging from atmospheric pressure to 0.25 GPa, and find that the hyperfine coupling increases linearly with pressure. We present a model based on van der Waals interactions, which accounts for this increase via compression of the fullerene cage and consequent admixture of orbitals with a larger hyperfine coupling. Combining this model with theoretical estimates of the bulk modulus, we predict the pressure shift and compare it to our experimental results, finding fair agreement given the spread in estimates of the bulk modulus. The spin resonance linewidth is also found to depend on pressure. This is explained by considering the pressure-dependent viscosity of the solvent, which modifies the effect of dipolar coupling between spins within fullerene clusters.
△ Less
Submitted 16 December, 2017;
originally announced December 2017.
-
Field-Effect Control of Graphene-Fullerene Thermoelectric Nanodevices
Authors:
Pascal Gehring,
Achim Harzheim,
Jean Spièce,
Yuewen Sheng,
Gregory Rogers,
Charalambos Evangeli,
Aadarsh Mishra,
Benjamin J. Robinson,
Kyriakos Porfyrakis,
Jamie H. Warner,
Oleg V. Kolosov,
G. Andrew D. Briggs,
Jan A. Mol
Abstract:
Although it was demonstrated that discrete molecular levels determine the sign and magnitude of the thermoelectric effect in single-molecule junctions, full electrostatic control of these levels has not been achieved to date. Here, we show that graphene nanogaps combined with gold microheaters serve as a testbed for studying single-molecule thermoelectricity. Reduced screening of the gate electric…
▽ More
Although it was demonstrated that discrete molecular levels determine the sign and magnitude of the thermoelectric effect in single-molecule junctions, full electrostatic control of these levels has not been achieved to date. Here, we show that graphene nanogaps combined with gold microheaters serve as a testbed for studying single-molecule thermoelectricity. Reduced screening of the gate electric field compared to conventional metal electrodes allows control of the position of the dominant transport orbital by hundreds of meV. We find that the power factor of graphene-fullerene junctions can be tuned over several orders of magnitude to a value close to the theoretical limit of an isolated Breit-Wigner resonance. Furthermore, our data suggest that the power factor of an isolated level is only given by the tunnel coupling to the leads and temperature. These results open up new avenues for exploring thermoelectricity and charge transport in individual molecules and highlight the importance of level alignment and coupling to the electrodes for optimum energy conversion in organic thermoelectric materials.
△ Less
Submitted 23 October, 2017;
originally announced October 2017.
-
Conditioned spin and charge dynamics of a single electron quantum dot
Authors:
Eliska Greplova,
Edward A. Laird,
G. Andrew D. Briggs,
Klaus Mølmer
Abstract:
In this article we describe the incoherent and coherent spin and charge dynamics of a single electron quantum dot. We use a stochastic master equation to model the state of the system, as inferred by an observer with access to only the measurement signal. Measurements obtained during an interval of time contribute, by a past quantum state analysis, to our knowledge about the system at any time…
▽ More
In this article we describe the incoherent and coherent spin and charge dynamics of a single electron quantum dot. We use a stochastic master equation to model the state of the system, as inferred by an observer with access to only the measurement signal. Measurements obtained during an interval of time contribute, by a past quantum state analysis, to our knowledge about the system at any time $t$ within that interval. Such analysis permits precise estimation of physical parameters, and we propose and test a modification of the classical Baum-Welch parameter re-estimation method to systems driven by both coherent and incoherent processes.
△ Less
Submitted 22 August, 2017;
originally announced August 2017.
-
Environment-Assisted Quantum Transport through Single-Molecule Junctions
Authors:
Jakub K. Sowa,
Jan A. Mol,
G. Andrew D. Briggs,
Erik M. Gauger
Abstract:
Single-molecule electronics has been envisioned as the ultimate goal in the miniaturisation of electronic circuits. While the aim of incorporating single-molecule junctions into modern technology still proves elusive, recent developments in this field have begun to enable experimental investigation fundamental concepts within the area of chemical physics. One such phenomenon is the concept of Envi…
▽ More
Single-molecule electronics has been envisioned as the ultimate goal in the miniaturisation of electronic circuits. While the aim of incorporating single-molecule junctions into modern technology still proves elusive, recent developments in this field have begun to enable experimental investigation fundamental concepts within the area of chemical physics. One such phenomenon is the concept of Environment-Assisted Quantum Transport which has emerged from the investigation of exciton transport in photosynthetic complexes. Here, we study charge transport through a two-site molecular junction coupled to a vibrational environment. We demonstrate that vibrational interactions can also significantly enhance the current through specific molecular orbitals. Our study offers a clear pathway towards finding and identifying environment-assisted transport phenomena in charge transport settings.
△ Less
Submitted 19 October, 2017; v1 submitted 9 June, 2017;
originally announced June 2017.
-
The spin resonance clock transition of the endohedral fullerene $^{15}\mathrm{N@C}_{60}$
Authors:
R. T. Harding,
S. Zhou,
J. Zhou,
T. Lindvall,
W. K. Myers,
A. Ardavan,
G. A. D. Briggs,
K. Porfyrakis,
E. A. Laird
Abstract:
The endohedral fullerene $^{15}\mathrm{N@C}_{60}$ has narrow electron paramagnetic resonance lines which have been proposed as the basis for a condensed-matter portable atomic clock. We measure the low-frequency spectrum of this molecule, identifying and characterizing a clock transition at which the frequency becomes insensitive to magnetic field. We infer a linewidth at the clock field of 100 kH…
▽ More
The endohedral fullerene $^{15}\mathrm{N@C}_{60}$ has narrow electron paramagnetic resonance lines which have been proposed as the basis for a condensed-matter portable atomic clock. We measure the low-frequency spectrum of this molecule, identifying and characterizing a clock transition at which the frequency becomes insensitive to magnetic field. We infer a linewidth at the clock field of 100 kHz. Using experimental data, we are able to place a bound on the clock's projected frequency stability. We discuss ways to improve the frequency stability to be competitive with existing miniature clocks.
△ Less
Submitted 13 May, 2017;
originally announced May 2017.
-
Strong coupling of microwave photons to antiferromagnetic fluctuations in an organic magnet
Authors:
M. Mergenthaler,
J. Liu,
J. J. Le Roy,
N. Ares,
A. L. Thompson,
L. Bogani,
F. Luis,
S. J. Blundell,
T. Lancaster,
A. Ardavan,
G. A. D. Briggs,
P. J. Leek,
E. A. Laird
Abstract:
Coupling between a crystal of di(phenyl)-(2,4,6-trinitrophenyl)iminoazanium radicals and a superconducting microwave resonator is investigated in a circuit quantum electrodynamics (circuit QED) architecture. The crystal exhibits paramagnetic behavior above 4~K, with antiferromagnetic correlations appearing below this temperature, and we demonstrate strong coupling at base temperature. The magnetic…
▽ More
Coupling between a crystal of di(phenyl)-(2,4,6-trinitrophenyl)iminoazanium radicals and a superconducting microwave resonator is investigated in a circuit quantum electrodynamics (circuit QED) architecture. The crystal exhibits paramagnetic behavior above 4~K, with antiferromagnetic correlations appearing below this temperature, and we demonstrate strong coupling at base temperature. The magnetic resonance acquires a field angle dependence as the crystal is cooled down, indicating anisotropy of the exchange interactions. These results show that multispin modes in organic crystals are suitable for circuit QED, offering a platform for their coherent manipulation. They also utilize the circuit QED architecture as a way to probe spin correlations at low temperature.
△ Less
Submitted 9 October, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
-
Scaling limits of graphene nanoelectrodes
Authors:
Syed Ghazi Sarwat,
Pascal Gehring,
Gerardo Rodriguez Hernandez,
Jamie H. Warner,
G. Andrew. D. Briggs,
Jan A. Mol,
Harish Bhaskaran
Abstract:
Graphene is an ideal material for fabricating atomically thin nanometre spaced electrodes. Recently, carbon-based nanoelectrodes have been employed to create single-molecule transistors and phase change memory devices. In spite of the significant recent interest in their use in a range of nanoscale devices from phase change memories to molecular electronics, the operating and scaling limits of the…
▽ More
Graphene is an ideal material for fabricating atomically thin nanometre spaced electrodes. Recently, carbon-based nanoelectrodes have been employed to create single-molecule transistors and phase change memory devices. In spite of the significant recent interest in their use in a range of nanoscale devices from phase change memories to molecular electronics, the operating and scaling limits of these electrodes are completely unknown. In this paper, we report on our observations of consistent voltage driven resistance switching in sub-5 nm graphene nanogaps. We find that we are able to reversibly cycle between a low and a high resistance state using feedback-controlled voltage ramps.We attribute this unexplained switching in the gap to the formation and breakdown of carbon filaments.By increasing the gap, we find that such intrinsic resistance switching of graphene nanogaps imposes a scaling limit of 10 nm (approx.) on the gap-size for devices with operating voltages of 1 to 2 volts.
△ Less
Submitted 18 February, 2017;
originally announced February 2017.
-
A double quantum dot memristor
Authors:
Ying Li,
Gregory W. Holloway,
Simon C. Benjamin,
G. Andrew D. Briggs,
Jonathan Baugh,
Jan A. Mol
Abstract:
Memristive systems are generalisations of memristors, which are resistors with memory. In this paper, we present a quantum description of memristive systems. Using this model we propose and experimentally demonstrate a simple and practical scheme for realising memristive systems with quantum dots. The approach harnesses a phenomenon that is commonly seen as a bane of nanoelectronics, i.e. switchin…
▽ More
Memristive systems are generalisations of memristors, which are resistors with memory. In this paper, we present a quantum description of memristive systems. Using this model we propose and experimentally demonstrate a simple and practical scheme for realising memristive systems with quantum dots. The approach harnesses a phenomenon that is commonly seen as a bane of nanoelectronics, i.e. switching of a trapped charge in the vicinity of the device. We show that quantum-dot memristive systems have hysteresis current-voltage characteristics and quantum jump induced stochastic behaviour. Realising such a quantum memristor completes the menu of components for quantum circuit design.
△ Less
Submitted 8 September, 2017; v1 submitted 26 December, 2016;
originally announced December 2016.
-
Metasurface polarization splitter
Authors:
Brian A. Slovick,
You Zhou,
Zhi Gang Yu,
Ivan I. Kravchenckou,
Dayrl P. Briggs,
Parikshit Moitra,
Srini Krishnamurthy,
Jason Valentine
Abstract:
Polarization beam splitters, devices that separate the two orthogonal polarizations of light into different propagation directions, are one of the most ubiquitous optical elements. However, traditionally polarization splitters rely on bulky optical materials, while emerging optoelectronic and photonic circuits require compact, chip-scale polarization splitters. Here we show that a subwavelength re…
▽ More
Polarization beam splitters, devices that separate the two orthogonal polarizations of light into different propagation directions, are one of the most ubiquitous optical elements. However, traditionally polarization splitters rely on bulky optical materials, while emerging optoelectronic and photonic circuits require compact, chip-scale polarization splitters. Here we show that a subwavelength rectangular lattice of cylindrical silicon Mie resonators functions as a polarization splitter, efficiently reflecting one polarization while transmitting the other. We show that the polarization splitting arises from the anisotropic permittivity and permeability of the metasurface due to the two-fold rotational symmetry of the rectangular unit cell. The high polarization efficiency, low loss, and low profile make these metasurface polarization splitters ideally suited for monolithic integration with optoelectronic and photonic circuits.
△ Less
Submitted 13 October, 2016;
originally announced October 2016.
-
Quantum Interference in Graphene Nanoconstrictions
Authors:
Pascal Gehring,
Hatef Sadeghi,
Sara Sangtarash,
Chit Siong Lau,
Junjie Liu,
Arzhang Ardavan,
Jamie H. Warner,
Colin J. Lambert,
G. Andrew. D. Briggs,
Jan A. Mol
Abstract:
We report quantum interference effects in the electrical conductance of chemical vapor deposited graphene nanoconstrictions fabricated using feedback controlled electroburning. The observed multimode Fabry-Perot interferences can be attributed to reflections at potential steps inside the channel. Sharp antiresonance features with a Fano line shape are observed. Theoretical modeling reveals that th…
▽ More
We report quantum interference effects in the electrical conductance of chemical vapor deposited graphene nanoconstrictions fabricated using feedback controlled electroburning. The observed multimode Fabry-Perot interferences can be attributed to reflections at potential steps inside the channel. Sharp antiresonance features with a Fano line shape are observed. Theoretical modeling reveals that these Fano resonances are due to localized states inside the constriction, which couple to the delocalized states that also give rise to the Fabry-Perot interference patterns. This study provides new insight into the interplay between two fundamental forms of quantum interference in graphene nanoconstrictions.
△ Less
Submitted 7 September, 2016;
originally announced September 2016.
-
Vibrational effects in charge transport through a molecular double quantum dot
Authors:
Jakub K. Sowa,
Jan A. Mol,
G. Andrew D. Briggs,
Erik M. Gauger
Abstract:
Recent progress in the field of molecular electronics has revealed the fundamental importance of the coupling between the electronic degrees of freedom and specific vibrational modes. Considering the examples of a molecular dimer and a carbon nanotube double quantum dot, we here theoretically investigate transport through a two-site system that is strongly coupled to a single vibrational mode. Usi…
▽ More
Recent progress in the field of molecular electronics has revealed the fundamental importance of the coupling between the electronic degrees of freedom and specific vibrational modes. Considering the examples of a molecular dimer and a carbon nanotube double quantum dot, we here theoretically investigate transport through a two-site system that is strongly coupled to a single vibrational mode. Using a quantum master equation approach, we demonstrate that, depending on the relative positions of the two dots, electron-phonon interactions can lead to negative differential conductance and suppression of the current through the system. We also discuss the experimental relevance of the presented results and possible implementations of the studied system.
△ Less
Submitted 17 February, 2017; v1 submitted 15 August, 2016;
originally announced August 2016.
-
Hyperfine and spin-orbit coupling effects on decay of spin-valley states in a carbon nanotube
Authors:
T. Pei,
A. Pályi,
M. Mergenthaler,
N. Ares,
A. Mavalankar,
J. H. Warner,
G. A. D. Briggs,
E. A. Laird
Abstract:
The decay of spin-valley states is studied in a suspended carbon nanotube double quantum dot via leakage current in Pauli blockade and via dephasing and decoherence of a qubit. From the magnetic field dependence of the leakage current, hyperfine and spin-orbit contributions to relaxation from blocked to unblocked states are identified and explained quantitatively by means of a simple model. The ob…
▽ More
The decay of spin-valley states is studied in a suspended carbon nanotube double quantum dot via leakage current in Pauli blockade and via dephasing and decoherence of a qubit. From the magnetic field dependence of the leakage current, hyperfine and spin-orbit contributions to relaxation from blocked to unblocked states are identified and explained quantitatively by means of a simple model. The observed qubit dephasing rate is consistent with the hyperfine coupling strength extracted from this model and inconsistent with dephasing from charge noise. However, the qubit coherence time, although longer than previously achieved, is probably still limited by charge noise in the device.
△ Less
Submitted 6 April, 2017; v1 submitted 6 July, 2016;
originally announced July 2016.
-
Resonant optomechanics with a vibrating carbon nanotube and a radio-frequency cavity
Authors:
Natalia Ares,
Tian Pei,
Aquila Mavalankar,
Matthias Mergenthaler,
Jamie H. Warner,
G. Andrew D. Briggs,
Edward A. Laird
Abstract:
In an optomechanical setup, the coupling between cavity and resonator can be increased by tuning them to the same frequency. We study this interaction between a carbon nanotube resonator and a radio-frequency circuit. In this resonant regime, the vacuum optomechanical coupling is enhanced by the DC voltage coupling the cavity and the mechanical resonator. Using the cavity to detect the nanotube's…
▽ More
In an optomechanical setup, the coupling between cavity and resonator can be increased by tuning them to the same frequency. We study this interaction between a carbon nanotube resonator and a radio-frequency circuit. In this resonant regime, the vacuum optomechanical coupling is enhanced by the DC voltage coupling the cavity and the mechanical resonator. Using the cavity to detect the nanotube's motion, we observe and simulate interference between mechanical and electrical oscillations. We measure the mechanical ring-down and show that further improvements to the system could enable measurement of mechanical motion at the quantum limit.
△ Less
Submitted 24 October, 2016; v1 submitted 17 May, 2016;
originally announced May 2016.
-
Detecting continuous spontaneous localisation with charged bodies in a Paul trap
Authors:
Ying Li,
Andrew M. Steane,
Daniel Bedingham,
G. Andrew D. Briggs
Abstract:
Continuous spontaneous localisation (CSL) is a model that captures the effects of a class of extensions to quantum theory which are expected to result from quantum gravity, and is such that wavefunction collapse is a physical process. The rate of such a process could be very much lower than the upper bounds set by searches to date, and yet still modify greatly the interpretation of quantum mechani…
▽ More
Continuous spontaneous localisation (CSL) is a model that captures the effects of a class of extensions to quantum theory which are expected to result from quantum gravity, and is such that wavefunction collapse is a physical process. The rate of such a process could be very much lower than the upper bounds set by searches to date, and yet still modify greatly the interpretation of quantum mechanics and solve the quantum measurement problem. Consequently experiments are sought to explore this. We describe an experiment that has the potential to extend sensitivity to CSL by many orders of magnitude. The method is to detect heating of the motion of charged macroscopic objects confined in a Paul trap. We discuss the detection and the chief noise sources. We find that CSL with standard parameters could be observed using a vibration-isolated ion trap of size 1 cm at ultra-low pressure, with optical interferometric detection.
△ Less
Submitted 6 May, 2016;
originally announced May 2016.
-
Photon-assisted tunneling and charge dephasing in a carbon nanotube double quantum dot
Authors:
Aquila Mavalankar,
Tian Pei,
Erik M. Gauger,
Jamie H. Warner,
G. Andrew D. Briggs,
Edward A. Laird
Abstract:
We report microwave-driven photon-assisted tunneling in a suspended carbon nanotube double quantum dot. From the resonant linewidth at a temperature of 13 mK, the charge dephasing time is determined to be 280 +- 30 ps. The linewidth is independent of driving frequency, but increases with increasing temperature. The moderate temperature dependence is inconsistent with expectations from electron-pho…
▽ More
We report microwave-driven photon-assisted tunneling in a suspended carbon nanotube double quantum dot. From the resonant linewidth at a temperature of 13 mK, the charge dephasing time is determined to be 280 +- 30 ps. The linewidth is independent of driving frequency, but increases with increasing temperature. The moderate temperature dependence is inconsistent with expectations from electron-phonon coupling alone, but consistent with charge noise arising in the device. The extracted level of charge noise is comparable with that expected from previous measurements of a valley-spin qubit, where it was hypothesized to be the main cause of qubit decoherence. Our results suggest a possible route towards improved valley-spin qubits.
△ Less
Submitted 1 July, 2016; v1 submitted 20 March, 2016;
originally announced March 2016.
-
Sensitive radio-frequency measurements of a quantum dot by tuning to perfect impedance matching
Authors:
N. Ares,
F. J. Schupp,
A. Mavalankar,
G. Rogers,
J. Griffiths,
G. A. C. Jones,
I. Farrer,
D. A. Ritchie,
C. G. Smith,
A. Cottet,
G. A. D. Briggs,
E. A. Laird
Abstract:
Electrical readout of spin qubits requires fast and sensitive measurements, but these are hindered by poor impedance matching to the device. We demonstrate perfect impedance matching in a radio-frequency readout circuit, realized by incorporating voltage-tunable varactors to cancel out parasitic capacitances. In the optimized setup, a capacitance sensitivity of…
▽ More
Electrical readout of spin qubits requires fast and sensitive measurements, but these are hindered by poor impedance matching to the device. We demonstrate perfect impedance matching in a radio-frequency readout circuit, realized by incorporating voltage-tunable varactors to cancel out parasitic capacitances. In the optimized setup, a capacitance sensitivity of $1.6~\mathrm{aF}/\sqrt{\mathrm{Hz}}$ is achieved at a maximum source-drain bias of $170~μ$V root-mean-square and with bandwidth above $15~$MHz. Coulomb blockade is measured via both conductance and capacitance in a quantum dot, and the two contributions are found to be proportional, as expected from a quasistatic tunneling model. We benchmark our results against the requirements for single-shot qubit readout using quantum capacitance, a goal that has so far been elusive.
△ Less
Submitted 30 November, 2015; v1 submitted 23 October, 2015;
originally announced October 2015.
-
Three-terminal graphene single-electron transistor fabricated using feedback-controlled electroburning
Authors:
Paweł Puczkarski,
Pascal Gehring,
Chit S. Lau,
Junjie Liu,
Arzhang Ardavan,
Jamie H. Warner,
G. Andrew D. Briggs,
Jan A. Mol
Abstract:
We report room-temperature Coulomb blockade in a single layer graphene three-terminal single-electron transistor (SET) fabricated using feedback-controlled electroburning. The small separation between the side gate electrode and the graphene quantum dot results in a gate coupling up to 3 times larger compared to the value found for the back gate electrode. This allows for an effective tuning betwe…
▽ More
We report room-temperature Coulomb blockade in a single layer graphene three-terminal single-electron transistor (SET) fabricated using feedback-controlled electroburning. The small separation between the side gate electrode and the graphene quantum dot results in a gate coupling up to 3 times larger compared to the value found for the back gate electrode. This allows for an effective tuning between the conductive and Coulomb blocked state using a small side gate voltage of about 1V. The technique can potentially be used in the future to fabricate all-graphene based room temperature single-electron transistors or three terminal single molecule transistors with enhanced gate coupling.
△ Less
Submitted 22 September, 2015;
originally announced September 2015.