-
Heat and particle flux detachment with stable plasma conditions in the Wendelstein 7-X stellarator fusion experiment
Authors:
Marcin Jakubowski,
Ralf König,
Oliver Schmitz,
Yuhe Feng,
Maciej Krychowiak,
Matthias Otte,
Felix Reimold,
Andreas Dinklage,
Peter Drewelow,
Florian Effenberg,
Yu Gao,
Holger Niemann,
Georg Schlisio,
Andrea Pavone,
Thomas Sunn Pedersen,
Uwe Wenzel,
Daihong Zhang,
Sebastijan Brezinsek,
Sergey Bozhenkov,
Kai Jakob Brunner,
Daniel Carralero,
Ken Hammond,
Golo Fuchert,
Jens Knauer,
Andreas Langenberg
, et al. (8 additional authors not shown)
Abstract:
Reduction of particle and heat fluxes to plasma facing components is critical to achieve stable conditions for both the plasma and the plasma material interface in magnetic confinement fusion experiments. A stable and reproducible plasma state in which the heat flux is almost completely removed from the material surfaces was discovered recently in the Wendelstein 7-X stellarator experiment. At the…
▽ More
Reduction of particle and heat fluxes to plasma facing components is critical to achieve stable conditions for both the plasma and the plasma material interface in magnetic confinement fusion experiments. A stable and reproducible plasma state in which the heat flux is almost completely removed from the material surfaces was discovered recently in the Wendelstein 7-X stellarator experiment. At the same time also particle fluxes are reduced such that material erosion can be mitigated. Sufficient neutral pressure was reached to maintain stable particle exhaust for density control in this plasma state. This regime could be maintained for up to 28 seconds with a minimum feedback control.
△ Less
Submitted 10 January, 2020; v1 submitted 7 January, 2020;
originally announced January 2020.
-
The unintended influence of control systems on edge-plasma transport and stability in the Joint European Torus
Authors:
A. J. Webster,
J. Morris,
T. N. Todd,
S. Brezinsek,
JET EFDA Contributors
Abstract:
A unique experiment in the Joint European Torus (JET) consecutively produced 120 almost identical plasma pulses, providing two orders of magnitude more data than is usually available. This allows the statistical detection of previously unobservable phenomena such as a sequence of resonant-like waiting times between edge-localised instabilities (ELMs). Here we investigate the causes of this phenome…
▽ More
A unique experiment in the Joint European Torus (JET) consecutively produced 120 almost identical plasma pulses, providing two orders of magnitude more data than is usually available. This allows the statistical detection of previously unobservable phenomena such as a sequence of resonant-like waiting times between edge-localised instabilities (ELMs). Here we investigate the causes of this phenomenon. By synchronising data to the 1000s of ELM times and averaging the results, random errors are reduced by a factor of 50, allowing unprecedentedly detailed behaviour to be described. A clear link can then be observed between plasma confinement, ELM occurrence, vertical plasma oscillations, and an otherwise unobservable oscillation in a control coil current that is not usually associated with ELM occurrence. The results suggest a strong and unanticipated edge-plasma dependence on control system behaviour.
△ Less
Submitted 9 October, 2014;
originally announced October 2014.
-
Gas Analyses of First complete JET Cryopump Regeneration with ITER-Like Wall
Authors:
S. Grunhagen Romanelli,
S. Brezinsek,
B. Butler,
J. P. Coad,
A. Drenik,
C. Giroud,
S. Jachmich,
T. Keenan,
U. Kruezi,
M. Mozetic,
M. Oberkofler,
A. Parracho,
M. Romanelli,
R. Smith,
JET EFDA contributors
Abstract:
Analytical results of a complete JET cryopump regeneration, including the nitrogen panel, following the first ITER-Like Wall campaign are presented along with the in-situ analyses of residual gas. H/D mixtures and impurities such as nitrogen and neon were injected during plasma operation in the vessel to study radiation cooling in the scrape-off-layer and divertor region. The global gas inventory…
▽ More
Analytical results of a complete JET cryopump regeneration, including the nitrogen panel, following the first ITER-Like Wall campaign are presented along with the in-situ analyses of residual gas. H/D mixtures and impurities such as nitrogen and neon were injected during plasma operation in the vessel to study radiation cooling in the scrape-off-layer and divertor region. The global gas inventory over the campaign is incomplete, suggesting residual volatile impurities are remaining on the cryogenic panel. This paper presents results on a) residual deuterium on the panel which is related to the campaign very low, b) impurities like nitrogen which sticks on the panel and c) the ammonia production which can be observed in the RGA spectrum.
△ Less
Submitted 13 June, 2014;
originally announced June 2014.
-
Contrasting H-mode behaviour with deuterium fuelling and nitrogen seeding in the all-carbon and metallic versions of JET
Authors:
G. P. Maddison,
C. Giroud,
B. Alper,
G. Arnoux,
I. Balboa,
M. N. A. Beurskens,
A. Boboc,
S. Brezinsek,
M. Brix,
M. Clever,
R. Coelho,
J. W. Coenen,
I. Coffey,
P. C. da Silva Aresta Belo,
S. Devaux,
P. Devynck,
T. Eich,
R. C. Felton,
J. Flanagan,
L. Frassinetti,
L. Garzotti,
M. Groth,
S. Jachmich,
A. Järvinen,
E. Joffrin
, et al. (26 additional authors not shown)
Abstract:
The former all-carbon wall on JET has been replaced with beryllium in the main torus and tungsten in the divertor to mimic the surface materials envisaged for ITER. Comparisons are presented between Type I H-mode characteristics in each design by examining respective scans over deuterium fuelling and impurity seeding, required to ameliorate exhaust loads both in JET at full capability and in ITER.
The former all-carbon wall on JET has been replaced with beryllium in the main torus and tungsten in the divertor to mimic the surface materials envisaged for ITER. Comparisons are presented between Type I H-mode characteristics in each design by examining respective scans over deuterium fuelling and impurity seeding, required to ameliorate exhaust loads both in JET at full capability and in ITER.
△ Less
Submitted 11 June, 2014;
originally announced June 2014.
-
Impact of nitrogen seeding on confinement and power load control of a high-triangularity JET ELMy H-mode plasma with a metal wall
Authors:
C Giroud,
G P Maddison,
S Jachmich,
F Rimini,
M N A Beurskens,
I Balboa,
S Brezinsek,
R Coelho,
J W Coenen,
L Frassinetti,
E Joffrin,
M Oberkofler,
M Lehnen,
Y Liu,
S Marsen,
K McCormick K,
A Meigs,
R Neu,
B Sieglin,
G van Rooij,
G Arnoux,
P Belo,
M Brix,
M Clever,
I Coffey
, et al. (17 additional authors not shown)
Abstract:
This paper reports the impact on confinement and power load of the high-shape 2.5MA ELMy H-mode scenario at JET of a change from an all carbon plasma facing components to an all metal wall. In preparation to this change, systematic studies of power load reduction and impact on confinement as a result of fuelling in combination with nitrogen seeding were carried out in JET-C and are compared to the…
▽ More
This paper reports the impact on confinement and power load of the high-shape 2.5MA ELMy H-mode scenario at JET of a change from an all carbon plasma facing components to an all metal wall. In preparation to this change, systematic studies of power load reduction and impact on confinement as a result of fuelling in combination with nitrogen seeding were carried out in JET-C and are compared to their counterpart in JET with a metallic wall. An unexpected and significant change is reported on the decrease of the pedestal confinement but is partially recovered with the injection of nitrogen.
△ Less
Submitted 31 October, 2013;
originally announced October 2013.
-
Time-Resonant Tokamak Plasma Edge Instabilities?
Authors:
A. J. Webster,
R. O. Dendy,
F. A. Calderon,
S. C. Chapman,
E. Delabie,
D. Dodt,
R. Felton,
T. N. Todd,
F. Maviglia,
J. Morris,
V. Riccardo,
B. Alper,
S Brezinsek,
P. Coad,
J. Likonen,
M. Rubel,
JET EFDA Contributors
Abstract:
For a two week period during the Joint European Torus (JET) 2012 experimental campaign, the same high confinement plasma was repeated 151 times. The dataset was analysed to produce a probability density function (pdf) for the waiting times between edge-localised plasma instabilities ("ELMS"). The result was entirely unexpected. Instead of a smooth single peaked pdf, a succession of 4-5 sharp maxim…
▽ More
For a two week period during the Joint European Torus (JET) 2012 experimental campaign, the same high confinement plasma was repeated 151 times. The dataset was analysed to produce a probability density function (pdf) for the waiting times between edge-localised plasma instabilities ("ELMS"). The result was entirely unexpected. Instead of a smooth single peaked pdf, a succession of 4-5 sharp maxima and minima uniformly separated by 7-8 millisecond intervals was found. Here we explore the causes of this newly observed phenomenon, and conclude that it is either due to a self-organised plasma phenomenon or an interaction between the plasma and a real-time control system. If the maxima are a result of "resonant" frequencies at which ELMs can be triggered more easily, then future ELM control techniques can, and probably will, use them. Either way, these results demand a deeper understanding of the ELMing process.
△ Less
Submitted 1 October, 2013;
originally announced October 2013.
-
Deuterium Balmer/Stark spectroscopy and impurity profiles: first results from mirror-link divertor spectroscopy system on the JET ITER-like wall
Authors:
A. G. Meigs,
S. Brezinsek,
M. Clever,
A. Huber,
S. Marsen,
C. Nicholas,
M. Stamp,
K-D Zastrow,
JET EFDA Contributors
Abstract:
For the ITER-like wall, the JET mirror link divertor spectroscopy system was redesigned to fully cover the tungsten horizontal strike plate with faster time resolution and improved near-UV performance. Since the ITER-like wall project involves a change in JET from a carbon dominated machine to a beryllium and tungsten dominated machine with residual carbon, the aim of the system is to provide the…
▽ More
For the ITER-like wall, the JET mirror link divertor spectroscopy system was redesigned to fully cover the tungsten horizontal strike plate with faster time resolution and improved near-UV performance. Since the ITER-like wall project involves a change in JET from a carbon dominated machine to a beryllium and tungsten dominated machine with residual carbon, the aim of the system is to provide the recycling flux, equivalent, to the im**ing deuterium ion flux, the impurity fluxes (C, Be, O) and tungsten sputtering fluxes and hence give information on the tungsten divertor source. In order to do this self-consistently, the system also needs to provide plasma characterization through the deuterium Balmer spectra measurements of electron density and temperature during high density. L-Mode results at the density limit from Stark broadening/line ratio analysis will be presented and compared to Langmuir probe profiles and 2D-tomography of low-n Balmer emission [1]. Comparison with other diagnostics will be vital for modelling attempts with the EDGE2D-EIRENE code[2] as the best possible data sets need to be provided to study detachment behaviour.
△ Less
Submitted 26 July, 2013;
originally announced July 2013.
