-
Thermodynamic Origin of Water's Thermal Conductivity Maximum
Authors:
Oliver R. Gittus,
Fernando Bresme
Abstract:
The thermal conductivity of water features a maximum (TCM) as a function of temperature at constant pressure. By examining why molecular force fields succeed or fail to reproduce the maximum and interpreting our results using the Bridgman equation, we show that water's TCM is connected with its compressibility minimum. Using Stillinger-Weber potentials for tetrahedral liquids, we interpolate betwe…
▽ More
The thermal conductivity of water features a maximum (TCM) as a function of temperature at constant pressure. By examining why molecular force fields succeed or fail to reproduce the maximum and interpreting our results using the Bridgman equation, we show that water's TCM is connected with its compressibility minimum. Using Stillinger-Weber potentials for tetrahedral liquids, we interpolate between the behaviour of simple liquids and highly tetrahedral materials such as carbon. Together with two vanishing limits at low/high tetrahedrality, we identify three regimes for the TCM: when it originates from either the compressibility minimum or density maximum, or both. Thus, the TCM exists in a "Goldilocks Zone" of tetrahedral order. We provide a thermodynamic explanation for the TCM of not only water, but tetrahedral liquids in general.
△ Less
Submitted 26 April, 2024;
originally announced April 2024.
-
The impact of the interfacial Kapitza resistance on colloidal thermophoresis
Authors:
Juan D. Olarte-Plata,
Fernando Bresme
Abstract:
Thermal gradients impart thermophoretic forces on colloidal particles, pushing colloids towards cold or hot regions, a phenomenon called thermophoresis. Current theoretical approaches relate the Soret coefficient to local changes in the interfacial tension around the colloid, which lead to fluid flow around the colloid surface. The Kapitza resistance, a key variable in the description of interfaci…
▽ More
Thermal gradients impart thermophoretic forces on colloidal particles, pushing colloids towards cold or hot regions, a phenomenon called thermophoresis. Current theoretical approaches relate the Soret coefficient to local changes in the interfacial tension around the colloid, which lead to fluid flow around the colloid surface. The Kapitza resistance, a key variable in the description of interfacial heat transport, is an experimentally accessible property that modifies interfacial thermal fields. Here, we introduce a theoretical approach that describes colloid thermophoretic forces by incorporating explicitly Kapitza resistance effects. Our formulation can be used to monitor the dependence of thermophoresis on the interfacial thermal resistance. We show that the resistance modifies the thermal field around the colloids and identify experimental conditions where the Kapitza resistance influences the thermophoretic forces. We validate our theoretical approach by implementing a non-equilibrium molecular dynamics model of a colloid suspended in a solvent.
△ Less
Submitted 7 June, 2024; v1 submitted 19 July, 2023;
originally announced July 2023.
-
On the microscopic origin of Soret coefficient minima in liquid mixtures
Authors:
Oliver R. Gittus,
Fernando Bresme
Abstract:
Temperature gradients induce mass separation in mixtures in a process called thermodiffusion and quantified by the Soret coefficient. The existence of minima in the Soret coefficient of aqueous solutions was controversial until fairly recently, where a combination of experiments and simulations provided evidence for the existence of this physical phenomenon. However, the physical origin of the min…
▽ More
Temperature gradients induce mass separation in mixtures in a process called thermodiffusion and quantified by the Soret coefficient. The existence of minima in the Soret coefficient of aqueous solutions was controversial until fairly recently, where a combination of experiments and simulations provided evidence for the existence of this physical phenomenon. However, the physical origin of the minima and more importantly its generality, e.g. in non-aqueous liquid mixtures, is still an outstanding question. We report the existence of a minimum in liquid mixtures of non-polar liquids modelled as Lennard-Jones mixtures, demonstrating the generality of this phenomenon. The Soret coefficient minimum originates from a coincident minimum in the thermodynamic factor, and hence denotes a maximimzation of non-ideality mixing conditions. We explain the microscopic origin of this effect in terms of the atomic coordination structure of the mixtures.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Enhanced thermo-optical response by means of anapole excitation
Authors:
Javier González-Colsa,
Juan D. Olarte-Plata,
Fernando Bresme,
Pablo Albella
Abstract:
High refractive index dielectric nanostructures offer a versatile platform to control light-matter interaction at the nanoscale as they can easily support electric and magnetic modes with low losses. An additional property that makes them extraordinary is that they can support low radiative modes, so-called anapole modes. In this work, we propose a spectrally tunable anapole nanoheater based on th…
▽ More
High refractive index dielectric nanostructures offer a versatile platform to control light-matter interaction at the nanoscale as they can easily support electric and magnetic modes with low losses. An additional property that makes them extraordinary is that they can support low radiative modes, so-called anapole modes. In this work, we propose a spectrally tunable anapole nanoheater based on the use of a dielectric anapole resonator able to amplify ten-fold the thermal response of a plasmonic nanoheater. This would allow the use of lower light intensities to achieve striking heating effects. As proof of concept, we perform a detailed study of the thermo-plasmonic response of a gold nanoring used as heating source and a silicon disk, designed to support anapole modes, located in its center acting as anapolar resonator. Furthermore, we utilize the anapole excitation to easily shift the thermal response of these structures from SWIR to the NIR range.
△ Less
Submitted 25 March, 2022;
originally announced March 2022.
-
Efficient Asymmetric photothermal source: Designing a heating Janus-Nanojet
Authors:
Javier González-Colsa,
Alfredo Franco Pérez,
Fernando Bresme,
Fernando Moreno,
Pablo Albella
Abstract:
Janus particles have flourished as subject of intensive research due to their synergetic properties and their promising use in different fields, especially in biomedicine. The combination of materials with radically different physical properties in the same nanostructure gives rise to the so-called Janus effects, allowing phenomena of a contrasting nature to occur in the same architecture. In part…
▽ More
Janus particles have flourished as subject of intensive research due to their synergetic properties and their promising use in different fields, especially in biomedicine. The combination of materials with radically different physical properties in the same nanostructure gives rise to the so-called Janus effects, allowing phenomena of a contrasting nature to occur in the same architecture. In particular, interesting advantages can be taken from a thermal Janus effect for photoinduced hyperthermia cancer therapies. Such therapies still have limitations associated to the heating control in terms of temperature stability and energy management. While previous studies have shown that some plasmonic single-material nanoparticles are somehow effective at killing cancer cells, it is necessary to investigate alternative plasmonic Janus nanoheaters to improve the heating efficiency and thermal control, mainly because the widespread single-material nanoheaters are highly homogeneous sources of heat, which implies that the surrounding biological medium is isotropically heated, equally affecting cancerous and healthy cells. A detailed thermoplasmonic study of the thermal Janus effect is still missing. Here we perform such study and demonstrate that doughnut-based Janus nanoparticles exhibit an outstanding photothermal control under practical illumination conditions, i.e., unpolarized light. Furthermore, we present novel and effective Janus nanoparticle designs that possess superior photothermal conversion features and unique directional heating capacity, being able to channel up to 91% of the total thermal energy onto a target. We discuss the implications of these innovative nanoparticles with regards to thermoplasmonics hyperthermia cancer therapy.
△ Less
Submitted 22 October, 2021;
originally announced October 2021.
-
Gold nanodoughnut as an outstanding nanoheater for photothermal applications
Authors:
Javier González-Colsa,
Guillermo Serrera,
José María Saiz,
Dolores Ortiz,
Francisco González,
Fernando Bresme,
Fernando Moreno,
Pablo Albella
Abstract:
Photoinduced hyperthermia is a cancer therapy technique that induces death to cancerous cells via heat generated by plasmonic nanoparticles. While previous studies have shown that some nanoparticles can be effective at killing cancer cells under certain conditions, there is still a necessity (or the need) to improve its heating efficiency. In this work, we perform a detailed thermoplasmonic study…
▽ More
Photoinduced hyperthermia is a cancer therapy technique that induces death to cancerous cells via heat generated by plasmonic nanoparticles. While previous studies have shown that some nanoparticles can be effective at killing cancer cells under certain conditions, there is still a necessity (or the need) to improve its heating efficiency. In this work, we perform a detailed thermoplasmonic study comparing the most effective nanoparticle geometries up to now with a doughnut-shaped nanoparticle, demonstrating that the latter exhibits a superior tunable photothermal response in practical illumination conditions, i.e., unpolarized light. Furthermore, we show that nanoparticle heating in fluidic environments, i.e., nanoparticles undergoing Brownian rotations, strongly depends on the particle orientation with respect to the illumination source. We conclude that the heating performance of nanodoughnuts is outstanding, with a temperature increment 35% higher than the second best nanoheater (nanodisks). Furthermore, nanodoughnuts feature a weak dependence on orientation, being therefore, ideal candidates for photothermal therapy applications. Finally, we present a designing guide, covering a wide range of toroid designs, which can help on its experimental implementation.
△ Less
Submitted 20 October, 2021; v1 submitted 2 June, 2021;
originally announced June 2021.
-
The nonlocal dielectric response of water in nanoconfinement
Authors:
Geoffrey Monet,
Fernando Bresme,
Alexei Kornyshev,
Hélène Berthoumieux
Abstract:
Recent experiments reporting a very low dielectric permittivity for nanoconfined water have renewed the interest to the structure and dielectric properties of water in narrow gaps. Here, we describe such systems with a minimal Landau-Ginzburg field-theory composed of a nonlocal bulk-determined term and a local water-surface interaction term. We show how the interplay between the boundary condition…
▽ More
Recent experiments reporting a very low dielectric permittivity for nanoconfined water have renewed the interest to the structure and dielectric properties of water in narrow gaps. Here, we describe such systems with a minimal Landau-Ginzburg field-theory composed of a nonlocal bulk-determined term and a local water-surface interaction term. We show how the interplay between the boundary conditions and intrinsic bulk correlations encodes dielectric properties of confined water. Our theoretical analysis is supported by molecular dynamics simulations and comparison with the experimental data.
△ Less
Submitted 18 February, 2021;
originally announced February 2021.
-
Non-equilibrium molecular dynamics and continuum modelling of transient freezing of atomistic solids
Authors:
Francesc Font,
William Micou,
Fernando Bresme
Abstract:
In this work we investigate the transient solidification of a Lennard-Jones liquid using non-equilibrium molecular dynamics simulations and continuum heat transfer theory. The simulations are performed in slab-shaped boxes, where a cold thermostat placed at the centre of the box drives the solidification of the liquid. Two well-defined solid fronts propagate outwards from the centre towards the en…
▽ More
In this work we investigate the transient solidification of a Lennard-Jones liquid using non-equilibrium molecular dynamics simulations and continuum heat transfer theory. The simulations are performed in slab-shaped boxes, where a cold thermostat placed at the centre of the box drives the solidification of the liquid. Two well-defined solid fronts propagate outwards from the centre towards the ends of the box until solidification is completed. A continuum phase change model that accounts for the difference between the solid and the liquid densities is formulated to describe the evolution of the temperature and the position of the solidification front. Simulation results for a small and a large nanoscale system, of sizes $30.27$\,nm and $60.54$\,nm, are compared with the predictions of the theoretical model. Following a transient period of $\sim$20-40 ps and a displacement of the solidification front of 1-2.5 nm we find that the simulations and the continuum theory show good agreement. We use this fact to combine the simulation and theoretical approaches to design a simple procedure to calculate the latent heat of the material. We also perform simulations of the homogeneous freezing process, i.e. in the absence of a temperature gradient and at constant temperature, by quenching the liquid at supercooled temperatures. We demonstrate that the solidification rate of homogenous freezing is much faster than the one obtained under a thermal gradient for systems of the same size subject to the same thermostat temperature. Our study and conclusions should be of general interest to a wide range of atomistic solids.
△ Less
Submitted 18 September, 2020;
originally announced September 2020.
-
Molecular Dynamics Simulation of Imidazolium CnMIM-BF4 Ionic Liquids using a Coarse Grained Force-Field
Authors:
Oscar Y. Fajardo,
Silvia Di Lecce,
Fernando Bresme
Abstract:
Ionic Liquids feature thermophysical properties that are of interest in solvents, energy storage materials and tenable lubrication applications. Recently, a series of coarse grained (CG) models was developed to investigate 1-ethyl-3-methylimidazolium tetrafluoroborate [C2MIM][BF4] and 1-butyl-3-methylimidazolium hexafluorophosphate [C4MIM][PF6] ionic liquids. Building on these CG models we derive…
▽ More
Ionic Liquids feature thermophysical properties that are of interest in solvents, energy storage materials and tenable lubrication applications. Recently, a series of coarse grained (CG) models was developed to investigate 1-ethyl-3-methylimidazolium tetrafluoroborate [C2MIM][BF4] and 1-butyl-3-methylimidazolium hexafluorophosphate [C4MIM][PF6] ionic liquids. Building on these CG models we derive force-fields to investigate the [C_{2-8}MIM] [BF4] family of ionic liquids, as a starting step for systematic investigations of lubrication under nanoconfinement conditions. The simualted equation of state and diffusion coefficients are in good agreement with experimental data and with all-atom force fields. We use these model to analyze the nano nanostructuring of ILs characteristic of cations with longer aliphatic chains as well as the ILs liquidvapour interfacial structure. The CG nature of these models enables the simulation of very long time scales, which are needed to computer reliable results of dynamic and interfacial properties. For [C>4MIM] [BF4] the break in symmetry associated to the liquid-vapor interface induces nanostructuring in polar and non-polar domains in the direction perpendicular to the interface plane, hence mimicking the behavior observed in the bulk phases.
△ Less
Submitted 20 October, 2019;
originally announced October 2019.
-
The influence of surface roughness on the adhesive interactions and phase behavior of suspensions of calcite nanoparticles
Authors:
Juan D. Olarte-Plata,
Gøran Brekke-Svaland,
Fernando Bresme
Abstract:
We investigate the impact of nanoparticle roughness on the phase behaviour of suspensions in models of calcium carbonate nanoparticles. We use a Derjaguin approach that incorporates roughness effects and interactions between the nanoparticles modelled with a combination of DLVO forces and hydration forces, derived using experimental data and atomistic molecular dynamics simulations, respectively.…
▽ More
We investigate the impact of nanoparticle roughness on the phase behaviour of suspensions in models of calcium carbonate nanoparticles. We use a Derjaguin approach that incorporates roughness effects and interactions between the nanoparticles modelled with a combination of DLVO forces and hydration forces, derived using experimental data and atomistic molecular dynamics simulations, respectively. Roughness effects, such as atomic steps or terraces appearing in mineral surfaces result in very different effective inter-nanoparticle potentials. Using stochastic Langevin Dynamics computer simulations and the effective interparticle interactions we demonstrate that relatively small changes in the roughness of the particles modify significantly the stability of the suspensions. We propose that the sensitivity of the phase behavior to the roughness is connected to the short length scale of the adhesive attraction arising from the ordering of water layers confined between calcite surfaces. Particles with smooth surfaces feature strong adhesive forces, and form gel fractal structures, while small surface roughness, of the order of atomic steps in mineral faces, stabilize the suspension. We believe that our work helps to rationalize the contrasting experimental results that have been obtained recently using nanoparticles or extended surfaces, which provide support for the existence of adhesive or repulsive interactions, respectively. We further use our model to analyze the synergistic effects of roughness, pH and ion concentration on the phase behavior of suspensions, connecting with recent experiments using calcium carbonate nanoparticles.
△ Less
Submitted 10 May, 2020; v1 submitted 17 May, 2019;
originally announced May 2019.
-
Limits to crystallization pressure
Authors:
Lei Li,
Felix Kohler,
Joanna Dziadkowiec,
Anja Røyne,
Rosa M. Espinosa Marzal,
Fernando Bresme,
Espen Jettestuen,
Dag Kristian Dysthe
Abstract:
Crystallization pressure drives deformation and damage in monuments, buildings and the Earth's crust. Even though the phenomenon has been known for 170 years there is no agreement between theoretical calculations of the maximum attainable pressure and that found experimentally. We have therefore developed a novel experimental technique to image the nano-confined crystallization process while contr…
▽ More
Crystallization pressure drives deformation and damage in monuments, buildings and the Earth's crust. Even though the phenomenon has been known for 170 years there is no agreement between theoretical calculations of the maximum attainable pressure and that found experimentally. We have therefore developed a novel experimental technique to image the nano-confined crystallization process while controlling the pressure and applied it to calcite. The results show that displacement by crystallization pressure is arrested at pressures well below the thermodynamic limit. We use existing molecular dynamics simulations and atomic force microscopy data to construct a robust model of the disjoining pressure in this system and thereby calculate the absolute distance between the surfaces. Based on the high resolution experiments and modelling we formulate a novel mechanism for the transition between damage and adhesion by crystallization that may find application in Earth and materials sciences and in conservation of cultural heritage.
△ Less
Submitted 25 May, 2021; v1 submitted 9 April, 2019;
originally announced April 2019.
-
Deconstructing temperature gradients across fluid interfaces: the structural origin of the thermal resistance of liquid-vapor interfaces
Authors:
Jordan Muscatello,
Enrique Chacón,
Pedro Tarazona,
Fernando Bresme
Abstract:
The interfacial thermal resistance determines condensation-evaporation processes and thermal transport across material-fluid interfaces. Despite its importance in transport processes, the interfacial structure responsible for the thermal resistance is still unknown. By combining non-equilibrium molecular dynamics simulations and interfacial analyses that remove the interfacial thermal fluctuations…
▽ More
The interfacial thermal resistance determines condensation-evaporation processes and thermal transport across material-fluid interfaces. Despite its importance in transport processes, the interfacial structure responsible for the thermal resistance is still unknown. By combining non-equilibrium molecular dynamics simulations and interfacial analyses that remove the interfacial thermal fluctuations we show that the thermal resistance of liquid-vapor interfaces is connected to a low density fluid layer that is adsorbed at the liquid surface. This thermal resistance layer (TRL) defines the boundary where the thermal transport mechanism changes from that of gases (ballistic) to that characteristic of dense liquids, dominated by frequent particle collisions involving very short mean free paths. We show that the thermal conductance is proportional to the number of atoms adsorbed in the TRL, and hence we explain the structural origin of the thermal resistance in liquid-vapor interfaces.
△ Less
Submitted 5 July, 2017; v1 submitted 13 February, 2017;
originally announced February 2017.
-
A computational approach to calculate the heat of transport of aqueous solutions
Authors:
Silvia Di Lecce,
Tim Albrecht,
Fernando Bresme
Abstract:
Thermal gradients induce concentration gradients in alkali halide solutions, and the salt migrates towards hot or cold regions depending on the average temperature of the solution. This effect has been interpreted using the heat of transport, which provides a route to rationalize thermophoretic phenomena. Early theories provide estimates of the heat of transport at infinite dilution. These values…
▽ More
Thermal gradients induce concentration gradients in alkali halide solutions, and the salt migrates towards hot or cold regions depending on the average temperature of the solution. This effect has been interpreted using the heat of transport, which provides a route to rationalize thermophoretic phenomena. Early theories provide estimates of the heat of transport at infinite dilution. These values are used to interpret thermodiffusion (Soret) and thermoelectric (Seebeck) effects. However, accessing heats of transport of individual ions at finite concentration remains an outstanding question both theoretically and experimentally. Here we discuss a computational approach to calculate heats of transport of aqueous solutions at finite concentrations, and apply our method to study lithium chloride solutions at concentrations $>0.5$~M. The heats of transport are significantly different for Li$^+$ and Cl$^-$ ions, unlike what is expected at infinite dilution. We find theoretical evidence for the existence of minima in the Soret coefficient of LiCl, where the magnitude of the heat of transport is maximized. The Seebeck coefficient obtained from the ionic heats of transport varies significantly with temperature and concentration. We identify thermodynamic conditions leading to a maximization of the thermoelectric response of aqueous solutions.
△ Less
Submitted 25 January, 2017;
originally announced January 2017.
-
Electrotunable friction with ionic liquid lubricants: how important is the molecular structure of the ions?
Authors:
O. Y. Fajardo,
Fernando Bresme,
Alexei A. Kornyshev,
Michael Urbakh
Abstract:
Using non-equilibrium molecular dynamics simulations and a coarse grained model of ionic liquids, we have investigated the impact that the shape and the intramolecular charge distribution of the ions have on the electrotuneable friction with ionic-liquid nanoscale films. We show that the electric-field induces significant structural changes in the film, leading to dramatic modifications of the fri…
▽ More
Using non-equilibrium molecular dynamics simulations and a coarse grained model of ionic liquids, we have investigated the impact that the shape and the intramolecular charge distribution of the ions have on the electrotuneable friction with ionic-liquid nanoscale films. We show that the electric-field induces significant structural changes in the film, leading to dramatic modifications of the friction force. Comparison of the present work with previous studies using different models of ionic liquids indicate that the phenomenology presented here applies to a wide range of ionic liquids. In particular, the electric-field-induced shift of the slippage plane from the solid-liquid interface to the interior of the film and the non-monotonic variation of the friction force are common features of ionic lubricants under strong confinement. We also demonstrate that the molecular structure of the ions plays an important role in determining the electrostriction and electroswelling of the confined film, hence showing the importance of ion-specific effects in electrotuneable friction.
△ Less
Submitted 23 August, 2015;
originally announced August 2015.
-
Assembling Ellipsoidal Particles at Fluid Interfaces using Switchable Dipolar Capillary Interactions
Authors:
Gary B. Davies,
Timm Krueger,
Peter V. Coveney,
Jens Harting,
Fernando Bresme
Abstract:
The fabrication of novel soft materials is an important scientific and technological challenge. We investigate the response of magnetic ellipsoidal particles adsorbed at fluid-fluid interfaces to external magnetic fields. By exploiting previously discovered first-order orientation phase transitions we show how to switch on and off dipolar capillary interactions between particles, leading to the fo…
▽ More
The fabrication of novel soft materials is an important scientific and technological challenge. We investigate the response of magnetic ellipsoidal particles adsorbed at fluid-fluid interfaces to external magnetic fields. By exploiting previously discovered first-order orientation phase transitions we show how to switch on and off dipolar capillary interactions between particles, leading to the formation of distinctive self-assembled structures and allowing dynamic control of the bottom-up fabrication of reconfigurable novel-structured materials
△ Less
Submitted 13 August, 2014;
originally announced August 2014.
-
Interface deformations affect the orientation transition of magnetic ellipsoidal particles adsorbed at fluid-fluid interfaces
Authors:
Gary B. Davies,
Timm Krüger,
Peter V. Coveney,
Jens Harting,
Fernando Bresme
Abstract:
Manufacturing new soft materials with specific optical, mechanical and magnetic properties is a significant challenge. Assembling and manipulating colloidal particles at fluid interfaces is a promising way to make such materials. We use lattice-Boltzmann simulations to investigate the response of magnetic ellipsoidal particles adsorbed at liquid-liquid interfaces to external magnetic fields. We pr…
▽ More
Manufacturing new soft materials with specific optical, mechanical and magnetic properties is a significant challenge. Assembling and manipulating colloidal particles at fluid interfaces is a promising way to make such materials. We use lattice-Boltzmann simulations to investigate the response of magnetic ellipsoidal particles adsorbed at liquid-liquid interfaces to external magnetic fields. We provide further evidence for the first-order orientation phase transition predicted by Bresme and Faraudo [Journal of Physics: Condensed Matter 19 (2007), 375110]. We show that capillary interface deformations around the ellipsoidal particle significantly affect the tilt-angle of the particle for a given dipole-field strength, altering the properties of the orientation transition. We propose scaling laws governing this transition, and suggest how to use these deformations to facilitate particle assembly at fluid-fluid interfaces.
△ Less
Submitted 28 October, 2014; v1 submitted 23 May, 2014;
originally announced May 2014.
-
Minimum in the thermal conductivity of supercooled water: a computer simulation study
Authors:
F. Bresme,
J. W. Biddle,
J. V. Sengers,
M. A. Anisimov
Abstract:
We report the results of a computer simulation study of the thermodynamic properties and the thermal conductivity of supercooled water as a function of pressure and temperature using the TIP4P-2005 water model. The thermodynamic properties can be represented by a two-structure equation of state consistent with the presence of a liquid-liquid critical point in the supercooled region. Our simulation…
▽ More
We report the results of a computer simulation study of the thermodynamic properties and the thermal conductivity of supercooled water as a function of pressure and temperature using the TIP4P-2005 water model. The thermodynamic properties can be represented by a two-structure equation of state consistent with the presence of a liquid-liquid critical point in the supercooled region. Our simulations confirm the presence of a minimum in the thermal conductivity, not only at atmospheric pressure, as previously found for the TIP5P water model, but also at elevated pressures. This anomalous behavior of the thermal conductivity of supercooled water appears to be related to the maximum of the isothermal compressibility or the minimum of the speed of sound. However, the magnitudes of the simulated thermal conductivities are sensitive to the water model adopted and appear to be significantly larger than the experimental thermal conductivities of real water at low temperatures.
△ Less
Submitted 15 April, 2014; v1 submitted 24 March, 2014;
originally announced March 2014.
-
Solvent-mediated interactions between nanoparticles at fluid interfaces
Authors:
F. Bresme,
H. Lehle,
M. Oettel
Abstract:
We investigate the solvent mediated interactions between nanoparticles adsorbed at a liquid-vapor interface in comparison to the solvent mediated interactions in the bulk liquid and vapor phases of a Lennard-Jones solvent. Molecular dynamics simulation data for the latter are in good agreement with results from integral equations in the reference functional approximation and a simple geometric a…
▽ More
We investigate the solvent mediated interactions between nanoparticles adsorbed at a liquid-vapor interface in comparison to the solvent mediated interactions in the bulk liquid and vapor phases of a Lennard-Jones solvent. Molecular dynamics simulation data for the latter are in good agreement with results from integral equations in the reference functional approximation and a simple geometric approximation. Simulation results for the solvent mediated interactions at the interface differ markedly from the interactions of the particles in the corresponding bulk phases. We find that at short interparticle distances the interactions are considerably more repulsive than those in either bulk phase. At long interparticle distances we find evidence for a long-ranged attraction. We discuss these observations in terms of interfacial interactions, namely, the three-phase line tension that would operate at short distances, and capillary wave interactions for longer interparticle distances.
△ Less
Submitted 3 April, 2009;
originally announced April 2009.