-
Increased instantaneous bandwidth of Rydberg atom electrometry with an optical frequency comb probe
Authors:
Alexandra B. Artusio-Glimpse,
David A. Long,
Sean M. Bresler,
Nikunjkumar Prajapati,
Dangka Shylla,
Andrew P. Rotunno,
Matthew T. Simons,
Samuel Berweger,
Noah Schlossberger,
Thomas W. LeBrun,
Christopher L. Holloway
Abstract:
We show that the use of an optical frequency comb probe leads to dramatically improved bandwidth (as high as 12+/-1 MHz) for the detection of modulated radio frequencies in Rydberg atom-based electrometry.
We show that the use of an optical frequency comb probe leads to dramatically improved bandwidth (as high as 12+/-1 MHz) for the detection of modulated radio frequencies in Rydberg atom-based electrometry.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Low-power, agile electro-optic frequency comb spectrometer for integrated sensors
Authors:
Kyunghun Han,
David A. Long,
Sean M. Bresler,
Junyeob Song,
Yiliang Bao,
Benjamin J. Reschovsky,
Kartik Srinivasan,
Jason J. Gorman,
Vladimir A. Aksyuk,
Thomas W. LeBrun
Abstract:
Sensing platforms based upon photonic integrated circuits have shown considerable promise; however, they require corresponding advancements in integrated optical readout technologies. Here, we present an on-chip spectrometer that leverages an integrated thin-film lithium niobate modulator to produce a frequency-agile electro-optic frequency comb for interrogating chip-scale temperature and acceler…
▽ More
Sensing platforms based upon photonic integrated circuits have shown considerable promise; however, they require corresponding advancements in integrated optical readout technologies. Here, we present an on-chip spectrometer that leverages an integrated thin-film lithium niobate modulator to produce a frequency-agile electro-optic frequency comb for interrogating chip-scale temperature and acceleration sensors. The chirped comb process allows for ultralow radiofrequency drive voltages, which are as much as seven orders of magnitude less than the lowest found in the literature and are generated using a chip-scale, microcontroller-driven direct digital synthesizer. The on-chip comb spectrometer is able to simultaneously interrogate both an on-chip temperature sensor and an off-chip, microfabricated optomechanical accelerometer with cutting-edge sensitivities of $\approx 5\ μ \mathrm{K} \cdot \mathrm{Hz}^{-1/2}$ and $\approx 130\ μ\mathrm{m} \cdot \mathrm{s}^{-2} \cdot \mathrm{Hz}^{-1/2}$, respectively. This platform is compatible with a broad range of existing photonic integrated circuit technologies, where its combination of frequency agility and ultralow radiofrequency power requirements are expected to have applications in fields such as quantum science and optical computing.
△ Less
Submitted 16 April, 2024; v1 submitted 14 September, 2023;
originally announced September 2023.
-
GPU enabled real-time optical frequency comb spectroscopy and photonic readout
Authors:
Sean M. Bresler,
David A. Long,
Benjamin J. Reschovsky,
Yiliang. Bao,
Thomas W. LeBrun
Abstract:
We describe a GPU-enabled approach for real-time optical frequency comb spectroscopy in which data is recorded, Fourier transformed, normalized, and fit at data rates up to 2.2 GB/s. As an initial demonstration we have applied this approach to rapidly interrogate the motion of an optomechanical accelerometer through the use of an electro-optic frequency comb. However, we note that this approach is…
▽ More
We describe a GPU-enabled approach for real-time optical frequency comb spectroscopy in which data is recorded, Fourier transformed, normalized, and fit at data rates up to 2.2 GB/s. As an initial demonstration we have applied this approach to rapidly interrogate the motion of an optomechanical accelerometer through the use of an electro-optic frequency comb. However, we note that this approach is readily amenable to both self-heterodyne and dual comb spectrometers for molecular spectroscopy as well as photonic readout where the approach's agility, speed, and simplicity are expected to enable future improvements and applications.
△ Less
Submitted 12 July, 2023;
originally announced July 2023.
-
High accuracy, high dynamic range optomechanical accelerometry enabled by dual comb spectroscopy
Authors:
D. A. Long,
J. R. Stroud,
B. J. Reschovsky,
Y. Bao,
F. Zhou,
S. M. Bresler,
T. W. LeBrun,
D. F. Plusquellic,
J. J. Gorman
Abstract:
Cavity optomechanical sensors can offer exceptional sensitivity; however, interrogating the cavity motion with high accuracy and dynamic range has proven to be challenging. Here we employ a dual optical frequency comb spectrometer to readout a microfabricated cavity optomechanical accelerometer, allowing for rapid simultaneous measurements of the cavity's displacement, finesse, and coupling at acc…
▽ More
Cavity optomechanical sensors can offer exceptional sensitivity; however, interrogating the cavity motion with high accuracy and dynamic range has proven to be challenging. Here we employ a dual optical frequency comb spectrometer to readout a microfabricated cavity optomechanical accelerometer, allowing for rapid simultaneous measurements of the cavity's displacement, finesse, and coupling at accelerations up to 24 g (236 m/s$^2$). With this approach, we have achieved a displacement sensitivity of 3 fm/Hz$^{1/2}$, a measurement rate of 100 kHz, and a dynamic range of 3.9 $\times$ 10$^5$ which is the highest we are aware of for a microfabricated cavity optomechanical sensor. In addition, comparisons of our optomechanical sensor coupled directly to a commercial reference accelerometer show agreement at the 0.5% level, a value which is limited by the reference's reported uncertainty. Further, the methods described herein are not limited to accelerometry but rather can be readily applied to nearly any optomechanical sensor where the combination of high speed, dynamic range, and sensitivity is expected to be enabling.
△ Less
Submitted 10 October, 2023; v1 submitted 30 June, 2023;
originally announced June 2023.
-
Data Incubation -- Synthesizing Missing Data for Handwriting Recognition
Authors:
Jen-Hao Rick Chang,
Martin Bresler,
Youssouf Chherawala,
Adrien Delaye,
Thomas Deselaers,
Ryan Dixon,
Oncel Tuzel
Abstract:
In this paper, we demonstrate how a generative model can be used to build a better recognizer through the control of content and style. We are building an online handwriting recognizer from a modest amount of training samples. By training our controllable handwriting synthesizer on the same data, we can synthesize handwriting with previously underrepresented content (e.g., URLs and email addresses…
▽ More
In this paper, we demonstrate how a generative model can be used to build a better recognizer through the control of content and style. We are building an online handwriting recognizer from a modest amount of training samples. By training our controllable handwriting synthesizer on the same data, we can synthesize handwriting with previously underrepresented content (e.g., URLs and email addresses) and style (e.g., cursive and slanted). Moreover, we propose a framework to analyze a recognizer that is trained with a mixture of real and synthetic training data. We use the framework to optimize data synthesis and demonstrate significant improvement on handwriting recognition over a model trained on real data only. Overall, we achieve a 66% reduction in Character Error Rate.
△ Less
Submitted 13 October, 2021;
originally announced October 2021.
-
SMaSH: A Benchmarking Toolkit for Human Genome Variant Calling
Authors:
Ameet Talwalkar,
Jesse Liptrap,
Julie Newcomb,
Christopher Hartl,
Jonathan Terhorst,
Kristal Curtis,
Ma'ayan Bresler,
Yun S. Song,
Michael I. Jordan,
David Patterson
Abstract:
Motivation: Computational methods are essential to extract actionable information from raw sequencing data, and to thus fulfill the promise of next-generation sequencing technology. Unfortunately, computational tools developed to call variants from human sequencing data disagree on many of their predictions, and current methods to evaluate accuracy and computational performance are ad-hoc and inco…
▽ More
Motivation: Computational methods are essential to extract actionable information from raw sequencing data, and to thus fulfill the promise of next-generation sequencing technology. Unfortunately, computational tools developed to call variants from human sequencing data disagree on many of their predictions, and current methods to evaluate accuracy and computational performance are ad-hoc and incomplete. Agreement on benchmarking variant calling methods would stimulate development of genomic processing tools and facilitate communication among researchers.
Results: We propose SMaSH, a benchmarking methodology for evaluating human genome variant calling algorithms. We generate synthetic datasets, organize and interpret a wide range of existing benchmarking data for real genomes, and propose a set of accuracy and computational performance metrics for evaluating variant calling methods on this benchmarking data. Moreover, we illustrate the utility of SMaSH to evaluate the performance of some leading single nucleotide polymorphism (SNP), indel, and structural variant calling algorithms.
Availability: We provide free and open access online to the SMaSH toolkit, along with detailed documentation, at smash.cs.berkeley.edu.
△ Less
Submitted 5 January, 2014; v1 submitted 31 October, 2013;
originally announced October 2013.
-
Optimal Assembly for High Throughput Shotgun Sequencing
Authors:
Guy Bresler,
Ma'ayan Bresler,
David Tse
Abstract:
We present a framework for the design of optimal assembly algorithms for shotgun sequencing under the criterion of complete reconstruction. We derive a lower bound on the read length and the coverage depth required for reconstruction in terms of the repeat statistics of the genome. Building on earlier works, we design a de Bru** graph based assembly algorithm which can achieve very close to the l…
▽ More
We present a framework for the design of optimal assembly algorithms for shotgun sequencing under the criterion of complete reconstruction. We derive a lower bound on the read length and the coverage depth required for reconstruction in terms of the repeat statistics of the genome. Building on earlier works, we design a de Bru** graph based assembly algorithm which can achieve very close to the lower bound for repeat statistics of a wide range of sequenced genomes, including the GAGE datasets. The results are based on a set of necessary and sufficient conditions on the DNA sequence and the reads for reconstruction. The conditions can be viewed as the shotgun sequencing analogue of Ukkonen-Pevzner's necessary and sufficient conditions for Sequencing by Hybridization.
△ Less
Submitted 18 February, 2013; v1 submitted 1 January, 2013;
originally announced January 2013.
