Showing 1–44 of 44 results for author: Brener, E A

A finite geometry, inertia assisted coarsening-to-complexity transition in homogeneous frictional systems

Authors: Thibault Roch, Efim A. Brener, Jean-François Molinari, Eran Bouchbinder

Abstract: The emergence of statistical complexity in frictional systems, manifested in broad distributions of various observables, is not yet understood. We study this problem in velocity-driven, homogeneous (no quenched disorder) unstable frictional systems of height $H$. The latter are described at the continuum scale within a realistic rate-and-state friction interfacial constitutive framework, where ela… ▽ More The emergence of statistical complexity in frictional systems, manifested in broad distributions of various observables, is not yet understood. We study this problem in velocity-driven, homogeneous (no quenched disorder) unstable frictional systems of height $H$. The latter are described at the continuum scale within a realistic rate-and-state friction interfacial constitutive framework, where elasto-frictional instabilities emerge from rate-weakening friction. For large $H$, such frictional systems were recently shown to undergo continuous coarsening until settling into a spatially periodic traveling solution. We show that when the system's height-to-length ratio becomes small, coarsening is less effective and the periodic solution is dynamically avoided. Instead, and consistently with previous reports, the system settles into a stochastic, statistically stationary state. The latter features slip bursts, classified into predominantly non-propagating small bursts and propagating large bursts, which are non-trivially distributed. The statistical distributions emerge from dynamically self-generated heterogeneity, where both the non-equilibrium history of the interface and wave reflections from finite boundaries, mediated by material inertia, play central roles. Specifically, the dynamics and statistics of large bursts reveal a timescale $\sim\!H/c_{\rm s}$, where $c_{\rm s}$ is the shear wave-speed. We discuss the robustness of our findings against variations of the frictional parameters, most notably affecting the magnitude of frictional rate-weakening, as well as against different interfacial state evolution laws. Finally, we demonstrate a reverse transition in which statistical complexity disappears in favor of the spatially periodic traveling solution. Overall, our results elucidate how relatively simple physical ingredients can give rise to the emergence of slip complexity. △ Less

Submitted 26 May, 2024; v1 submitted 11 February, 2024; originally announced February 2024.

Comments: v2: new results on the robustness of complexity and a reverse complexity-to-coarsening transition, including new section, figures (Figs. 4 & 5) and appendix

The dynamics of unsteady frictional slip pulses

Authors: Anna Pomyalov, Fabian Barras, Thibault Roch, Efim A. Brener, Eran Bouchbinder

Abstract: Self-healing slip pulses are major spatiotemporal failure modes of frictional systems, featuring a characteristic size $L(t)$ and a propagation velocity $c_{\rm p}(t)$ ($t$ is time). Here, we develop a theory of slip pulses in realistic rate-and-state dependent frictional systems. We show that slip pulses are intrinsically unsteady objects -- in agreement with previous findings -- yet their dynami… ▽ More Self-healing slip pulses are major spatiotemporal failure modes of frictional systems, featuring a characteristic size $L(t)$ and a propagation velocity $c_{\rm p}(t)$ ($t$ is time). Here, we develop a theory of slip pulses in realistic rate-and-state dependent frictional systems. We show that slip pulses are intrinsically unsteady objects -- in agreement with previous findings -- yet their dynamical evolution is closely related to their unstable steady-state counterparts. In particular, we show that each point along the time-independent $L^{\mbox{(0)}}(τ_{\rm d})\!-\!c^{\mbox{(0)}}_{\rm p}(τ_{\rm d})$ line, obtained from a family of steady-state pulse solutions parameterized by the driving shear stress $τ_{\rm d}$, is unstable. Nevertheless, and remarkably, the $c^{\mbox{(0)}}_{\rm p}[L^{\mbox{(0)}}]$ line is a dynamic attractor such that the unsteady dynamics of slip pulses (when they exist) -- whether growing ($\dot{L}(t)\!>\!0$) or decaying ($\dot{L}(t)\!<\!0$) -- reside on the steady-state line. The unsteady dynamics along the line are controlled by a single slow unstable mode. The slow dynamics of growing pulses, manifested by $\dot{L}(t)/c_{\rm p}(t)\!\ll\!1$, explain the existence of sustained pulses, i.e.~pulses that propagate many times their characteristic size without appreciably changing their properties. Our theoretical picture of unsteady frictional slip pulses is quantitatively supported by large-scale, dynamic boundary-integral method simulations. △ Less

Submitted 23 August, 2023; v1 submitted 4 June, 2023; originally announced June 2023.

Comments: Note an addition to v2: Literature results for the thermal pressurization constitutive relation are consistent with our findings and indicate the relevance of the emerging picture to strongly weakening frictional interfaces

Journal ref: Proceedings of the National Academy of Sciences 120, e2309374120 (2023)

Self-healing (solitonic) slip pulses in frictional systems

Authors: Anna Pomyalov, Yuri Lubomirsky, Lara Braverman, Efim A. Brener, Eran Bouchbinder

Abstract: A prominent spatiotemporal failure mode of frictional systems is self-healing slip pulses, which are propagating solitonic structures that feature a characteristic length. Here, we numerically derive a family of steady state slip pulse solutions along generic and realistic rate-and-state dependent frictional interfaces, separating large deformable bodies in contact. Such nonlinear interfaces featu… ▽ More A prominent spatiotemporal failure mode of frictional systems is self-healing slip pulses, which are propagating solitonic structures that feature a characteristic length. Here, we numerically derive a family of steady state slip pulse solutions along generic and realistic rate-and-state dependent frictional interfaces, separating large deformable bodies in contact. Such nonlinear interfaces feature a non-monotonic frictional strength as a function of the slip velocity, with a local minimum. The solutions exhibit a diverging length and strongly inertial propagation velocities, when the driving stress approaches the frictional strength characterizing the local minimum from above, and change their character when it is away from it. An approximate scaling theory quantitatively explains these observations. The derived pulse solutions also exhibit significant spatially-extended dissipation in excess of the edge-localized dissipation (the effective fracture energy) and an unconventional edge singularity. The relevance of our findings for available observations is discussed. △ Less

Submitted 30 May, 2022; originally announced May 2022.

Comments: 5 pages, 4 figures + extended Supplemental Materials

Journal ref: Physical Review E 107, L013001 (2023)

Velocity-driven frictional sliding: Coarsening and steady-state pulse trains

Authors: Thibault Roch, Efim A. Brener, Jean-Francois Molinari, Eran Bouchbinder

Abstract: Frictional sliding is an intrinsically complex phenomenon, emerging from the interplay between driving forces, elasto-frictional instabilities, interfacial nonlinearity and dissipation, material inertia and bulk geometry. We show that homogeneous rate-and-state dependent frictional systems, driven at a prescribed boundary velocity -- as opposed to a prescribed stress -- in a range where the fricti… ▽ More Frictional sliding is an intrinsically complex phenomenon, emerging from the interplay between driving forces, elasto-frictional instabilities, interfacial nonlinearity and dissipation, material inertia and bulk geometry. We show that homogeneous rate-and-state dependent frictional systems, driven at a prescribed boundary velocity -- as opposed to a prescribed stress -- in a range where the frictional interface is rate-weakening, generically host self-healing slip pulses, a sliding mode not yet fully understood. Such velocity-driven frictional systems are then shown to exhibit coarsening dynamics saturated at the system length in the sliding direction, independently of the system's height, leading to steadily propagating pulse trains. The latter may be viewed as a propagating phase-separated state, where slip and stick characterize the two phases. While pulse trains' periodicity is coarsening-limited by the system's length, the single pulse width, characteristic slip velocity and propagation speed exhibit rich properties, which are comprehensively understood using theory and extensive numerics. Finally, we show that for sufficiently small system heights, pulse trains are accompanied by periodic elasto-frictional instabilities. △ Less

Submitted 27 April, 2021; originally announced April 2021.

Comments: 18 page, 9 figures (including appendices)

Journal ref: Journal of the Mechanics and Physics of Solids 158, 104607 (2022)

Theory of unconventional singularities of frictional shear cracks

Authors: Efim A. Brener, Eran Bouchbinder

Abstract: Crack-like objects that propagate along frictional interfaces, i.e.~frictional shear cracks, play a major role in a broad range of frictional phenomena. Such frictional cracks are commonly assumed to feature the universal square root near-edge singularity of ideal shear cracks, as predicted by Linear Elastic Fracture Mechanics. Here we show that this is not the generic case due to the intrinsic de… ▽ More Crack-like objects that propagate along frictional interfaces, i.e.~frictional shear cracks, play a major role in a broad range of frictional phenomena. Such frictional cracks are commonly assumed to feature the universal square root near-edge singularity of ideal shear cracks, as predicted by Linear Elastic Fracture Mechanics. Here we show that this is not the generic case due to the intrinsic dependence of the frictional strength on the slip rate, even if the bodies forming the frictional interface are identical and predominantly linear elastic. Instead, frictional shear cracks feature unconventional singularities characterized by a singularity order $ξ$ that differs from the conventional $-\tfrac{1}{2}$ one. It is shown that $ξ$ depends on the friction law, on the propagation speed and on the symmetry mode of loading. We discuss the general structure of a theory of unconventional singularities, along with their implications for the energy balance and dynamics of frictional cracks. Finally, we present explicit calculations of $ξ$ and the associated near-edge fields for linear viscous-friction -- which may emerge as a perturbative approximation of nonlinear friction laws or on its own -- for both in-plane (mode-II) and anti-plane (mode-III) shear loadings. △ Less

Submitted 19 March, 2021; originally announced March 2021.

Comments: 15 pages, 2 figures

Journal ref: Journal of the Mechanics and Physics of Solids 153, 104466 (2021)

Unconventional singularities, scale separation and energy balance in frictional rupture

Authors: Efim A. Brener, Eran Bouchbinder

Abstract: A widespread framework for understanding frictional rupture, such as earthquakes along geological faults, invokes an analogy to ordinary cracks. A distinct feature of ordinary cracks is that their near edge fields are characterized by a square root singularity, which is intimately related to the existence of strict dissipation-related lengthscale separation and edge-localized energy balance. Yet,… ▽ More A widespread framework for understanding frictional rupture, such as earthquakes along geological faults, invokes an analogy to ordinary cracks. A distinct feature of ordinary cracks is that their near edge fields are characterized by a square root singularity, which is intimately related to the existence of strict dissipation-related lengthscale separation and edge-localized energy balance. Yet, the interrelations between the singularity order, lengthscale separation and edge-localized energy balance in frictional rupture are not fully understood, even in physical situations in which the conventional square root singularity remains approximately valid. Here we develop a macroscopic theory that shows that the generic rate-dependent nature of friction leads to deviations from the conventional singularity, and that even if this deviation is small, significant non-edge-localized rupture-related dissipation emerges. The physical origin of the latter, which is predicted to vanish identically in the crack analogy, is the breakdown of scale separation that leads an accumulated spatially-extended dissipation, involving macroscopic scales. The non-edge-localized rupture-related dissipation is also predicted to be position dependent. The theoretical predictions are quantitatively supported by available numerical results, and their possible implications for earthquake physics are discussed. △ Less

Submitted 15 March, 2021; v1 submitted 11 August, 2020; originally announced August 2020.

Comments: Revised presentation, no change in content (10 pages, 5 figures)

Journal ref: Nature Communications 12, 2585 (2021)

Spatiotemporal dynamics of frictional systems: The interplay of interfacial friction and bulk elasticity

Authors: Yohai Bar-Sinai, Michael Aldam, Robert Spatschek, Efim A. Brener, Eran Bouchbinder

Abstract: Frictional interfaces are abundant in natural and engineering systems, and predicting their behavior still poses challenges of prime scientific and technological importance. At the heart of these challenges lies the inherent coupling between the interfacial constitutive relation -- the macroscopic friction law -- and the bulk elasticity of the bodies that form the frictional interface. In this fea… ▽ More Frictional interfaces are abundant in natural and engineering systems, and predicting their behavior still poses challenges of prime scientific and technological importance. At the heart of these challenges lies the inherent coupling between the interfacial constitutive relation -- the macroscopic friction law -- and the bulk elasticity of the bodies that form the frictional interface. In this feature paper, we discuss the generic properties of the macroscopic friction law and the many ways in which its coupling to bulk elasticity gives rise to rich spatiotemporal frictional dynamics. We first present the widely used rate-and-state friction constitutive framework, discuss its power and limitations, and propose extensions that are supported by experimental data. We then discuss how bulk elasticity couples different parts of the interface, and how the range and nature of this interaction are affected by the system's geometry. Finally, in light of the coupling between interfacial and bulk physics, we discuss basic phenomena in spatially-extended frictional systems, including the stability of homogeneous sliding, the onset of sliding motion and a wide variety of propagating frictional modes (e.g. rupture fronts, healing fronts and slip pulses). Overall, the results presented and discussed in this feature paper highlight the inseparable roles played by interfacial and bulk physics in spatially-extended frictional systems. △ Less

Submitted 7 August, 2019; originally announced August 2019.

Comments: An invited feature paper (24 pages including Appendices, 8 figures)

Journal ref: Lubricants 7, 91 (2019)

The emergence of crack-like behavior of frictional rupture: Edge singularity and energy balance

Authors: Fabian Barras, Michael Aldam, Thibault Roch, Efim A. Brener, Eran Bouchbinder, Jean-François Molinari

Abstract: The failure of frictional interfaces -- the process of frictional rupture -- is widely assumed to feature crack-like properties, with far-reaching implications for various disciplines, ranging from engineering tribology to earthquake physics. An important condition for the emergence of a crack-like behavior is the existence of stress drops in frictional rupture, whose basic physical origin has bee… ▽ More The failure of frictional interfaces -- the process of frictional rupture -- is widely assumed to feature crack-like properties, with far-reaching implications for various disciplines, ranging from engineering tribology to earthquake physics. An important condition for the emergence of a crack-like behavior is the existence of stress drops in frictional rupture, whose basic physical origin has been recently elucidated. Here we show that for generic and realistic frictional constitutive relations, and once the necessary conditions for the emergence of an effective crack-like behavior are met, frictional rupture dynamics are approximately described by a crack-like, fracture mechanics energy balance equation. This is achieved by independently calculating the intensity of the crack-like singularity along with its associated elastic energy flux into the rupture edge region, and the frictional dissipation in the edge region. We further show that while the fracture mechanics energy balance equation provides an approximate, yet quantitative, description of frictional rupture dynamics, interesting deviations from the ordinary crack-like framework -- associated with non-edge-localized dissipation -- exist. Together with the recent results about the emergence of stress drops in frictional rupture, this work offers a comprehensive and basic understanding of why, how and to what extent frictional rupture might be viewed as an ordinary fracture process. Various implications are discussed. △ Less

Submitted 20 November, 2019; v1 submitted 9 July, 2019; originally announced July 2019.

Comments: v2: slightly revised single-edge singularity analysis (see revised Figs. 3 & S2 and Sect. S-1), new Fig. S4, new discussion of an analytic expression for the effective fracture energy (see Eq. S10). See also arXiv:1906.11533

Journal ref: Earth and Planetary Science Letters 531, 115978 (2020)

The emergence of crack-like behavior of frictional rupture: The origin of stress drops

Authors: Fabian Barras, Michael Aldam, Thibault Roch, Efim A. Brener, Eran Bouchbinder, Jean-François Molinari

Abstract: The process of frictional rupture, i.e. the failure of frictional systems, abounds in the technological and natural world around us, ranging from squealing car brake pads to earthquakes along geological faults. A general framework for understanding and interpreting frictional rupture commonly involves an analogy to ordinary crack propagation, with far-reaching implications for various disciplines,… ▽ More The process of frictional rupture, i.e. the failure of frictional systems, abounds in the technological and natural world around us, ranging from squealing car brake pads to earthquakes along geological faults. A general framework for understanding and interpreting frictional rupture commonly involves an analogy to ordinary crack propagation, with far-reaching implications for various disciplines, from engineering tribology to geophysics. An important feature of the analogy to cracks is the existence of a reduction in the stress-bearing capacity of the ruptured interface, i.e. of a drop from the applied stress, realized far ahead of a propagating rupture, to the residual stress left behind it. Yet, how and under what conditions such finite and well-defined stress drops emerge from basic physics are not well understood. Here we show that for rapid rupture a stress drop is directly related to wave radiation from the frictional interface to the bodies surrounding it and to long-range bulk elastodynamics, and not exclusively to the physics of the contact interface. Furthermore, we show that the emergence of a stress drop is a transient effect, affected by the wave travel time in finite systems and by the decay of long-range elastic interactions. Finally, we supplement our results for rapid rupture with predictions for slow rupture. All of the theoretical predictions are supported by available experimental data and by extensive computations. Our findings elucidate the origin of stress drops in frictional rupture, i.e. they offer a comprehensive and fundamental understanding of why, how and to what extent frictional rupture might be viewed as an ordinary fracture process. △ Less

Submitted 20 November, 2019; v1 submitted 27 June, 2019; originally announced June 2019.

Comments: v2: a new analysis of the spatiotemporal integral contribution to the stress drop (Sect. IIB and Appendix A7). See also: arXiv:1907.04376

Journal ref: Phys. Rev. X 9, 041043 (2019)

Unstable slip pulses and earthquake nucleation as a non-equilibrium first-order phase transition

Authors: Efim A. Brener, Michael Aldam, Fabian Barras, Jean-François Molinari, Eran Bouchbinder

Abstract: The onset of rapid slip along initially quiescent frictional interfaces, the process of `earthquake nucleation', and dissipative spatiotemporal slippage dynamics play important roles in a broad range of physical systems. Here we first show that interfaces described by generic friction laws feature stress-dependent steady-state slip pulse solutions, which are unstable in the quasi-1D approximation… ▽ More The onset of rapid slip along initially quiescent frictional interfaces, the process of `earthquake nucleation', and dissipative spatiotemporal slippage dynamics play important roles in a broad range of physical systems. Here we first show that interfaces described by generic friction laws feature stress-dependent steady-state slip pulse solutions, which are unstable in the quasi-1D approximation of thin elastic bodies. We propose that such unstable slip pulses of linear size $L^*$ and characteristic amplitude are `critical nuclei' for rapid slip in a non-equilibrium analogy to equilibrium first-order phase transitions, and quantitatively support this idea by dynamical calculations. We then perform 2D numerical calculations that indicate that the nucleation length $L^*$ exists also in 2D, and that the existence of a fracture mechanics Griffith-like length $L_G\!<\!L^*$ gives rise to a richer phase-diagram that features also sustained slip pulses. △ Less

Submitted 15 November, 2018; v1 submitted 18 July, 2018; originally announced July 2018.

Comments: Updated Figs. 3, 5 and S3, added scaling theory for $L^*$, added references

Journal ref: Phys. Rev. Lett. 121, 234302 (2018)

Critical nucleation length for accelerating frictional slip

Authors: Michael Aldam, Marc Weikamp, Robert Spatschek, Efim A. Brener, Eran Bouchbinder

Abstract: The spontaneous nucleation of accelerating slip along slowly driven frictional interfaces is central to a broad range of geophysical, physical and engineering systems, with particularly far-reaching implications for earthquake physics. A common approach to this problem associates nucleation with an instability of an expanding creep patch upon surpassing a critical length $L_c$. The critical nuclea… ▽ More The spontaneous nucleation of accelerating slip along slowly driven frictional interfaces is central to a broad range of geophysical, physical and engineering systems, with particularly far-reaching implications for earthquake physics. A common approach to this problem associates nucleation with an instability of an expanding creep patch upon surpassing a critical length $L_c$. The critical nucleation length $L_c$ is conventionally obtained from a spring-block linear stability analysis extended to interfaces separating elastically-deformable bodies using model-dependent fracture mechanics estimates. We propose an alternative approach in which the critical nucleation length is obtained from a related linear stability analysis of homogeneous sliding along interfaces separating elastically-deformable bodies. For elastically identical half-spaces and rate-and-state friction, the two approaches are shown to yield $L_c$ that features the same scaling structure, but with substantially different numerical pre-factors, resulting in a significantly larger $L_c$ in our approach. The proposed approach is also shown to be naturally applicable to finite-size systems and bimaterial interfaces, for which various analytic results are derived. To quantitatively test the proposed approach, we performed inertial Finite-Element-Method calculations for a finite-size two-dimensional elastically-deformable body in rate-and-state frictional contact with a rigid body under sideway loading. We show that the theoretically predicted $L_c$ and its finite-size dependence are in reasonably good quantitative agreement with the full numerical solutions, lending support to the proposed approach. These results offer a theoretical framework for predicting rapid slip nucleation along frictional interfaces. △ Less

Submitted 13 November, 2017; v1 submitted 13 July, 2017; originally announced July 2017.

Comments: Added discussion about nonlinearity, new results for the slip law & different background strength (Fig. 3)

Journal ref: Geophysical Research Letters 44, 11390 (2017)

Non-monotonicity of the frictional bimaterial effect

Authors: Michael Aldam, Shiqing Xu, Efim A. Brener, Yehuda Ben-Zion, Eran Bouchbinder

Abstract: Sliding along frictional interfaces separating dissimilar elastic materials is qualitatively different from sliding along interfaces separating identical materials due to the existence of an elastodynamic coupling between interfacial slip and normal stress perturbations in the former case. This bimaterial coupling has important implications for the dynamics of frictional interfaces, including thei… ▽ More Sliding along frictional interfaces separating dissimilar elastic materials is qualitatively different from sliding along interfaces separating identical materials due to the existence of an elastodynamic coupling between interfacial slip and normal stress perturbations in the former case. This bimaterial coupling has important implications for the dynamics of frictional interfaces, including their stability and rupture propagation along them. We show that while this bimaterial coupling is a monotonically increasing function of the bimaterial contrast, when it is coupled to interfacial shear stress perturbations through a friction law, various physical quantities exhibit a non-monotonic dependence on the bimaterial contrast. In particular, we show that for a regularized Coulomb friction, the maximal growth rate of unstable interfacial perturbations of homogeneous sliding is a non-monotonic function of the bimaterial contrast, and provide analytic insight into the origin of this non-monotonicity. We further show that for velocity-strengthening rate-and-state friction, the maximal growth rate of unstable interfacial perturbations of homogeneous sliding is also a non-monotonic function of the bimaterial contrast. Results from simulations of dynamic rupture along a bimaterial interface with slip-weakening friction provide evidence that the theoretically predicted non-monotonicity persists in non-steady, transient frictional dynamics. △ Less

Submitted 4 July, 2017; originally announced July 2017.

Comments: 14 pages, 5 figures

Journal ref: J. Geophys. Res. Solid Earth 122, 8270 (2017)

Frictional sliding without geometrical reflection symmetry

Authors: Michael Aldam, Yohai Bar-Sinai, Ilya Svetlizky, Efim A. Brener, Jay Fineberg, Eran Bouchbinder

Abstract: The dynamics of frictional interfaces play an important role in many physical systems spanning a broad range of scales. It is well-known that frictional interfaces separating two dissimilar materials couple interfacial slip and normal stress variations, a coupling that has major implications on their stability, failure mechanism and rupture directionality. In contrast, interfaces separating identi… ▽ More The dynamics of frictional interfaces play an important role in many physical systems spanning a broad range of scales. It is well-known that frictional interfaces separating two dissimilar materials couple interfacial slip and normal stress variations, a coupling that has major implications on their stability, failure mechanism and rupture directionality. In contrast, interfaces separating identical materials are traditionally assumed not to feature such a coupling due to symmetry considerations. We show, combining theory and experiments, that interfaces which separate bodies made of macroscopically identical materials, but lack geometrical reflection symmetry, generically feature such a coupling. We discuss two applications of this novel feature. First, we show that it accounts for a distinct, and previously unexplained, experimentally observed weakening effect in frictional cracks. Second, we demonstrate that it can destabilize frictional sliding which is otherwise stable. The emerging framework is expected to find applications in a broad range of systems. △ Less

Submitted 29 September, 2016; v1 submitted 17 May, 2016; originally announced May 2016.

Comments: 14 pages, 5 figures + Supplementary Material. Minor change in the title, extended analysis in the second part

Journal ref: Phys. Rev. X 6, 041023 (2016)

Dynamic instabilities of frictional sliding at a bimaterial interface

Authors: Efim A. Brener, Marc Weikamp, Robert Spatschek, Yohai Bar-Sinai, Eran Bouchbinder

Abstract: We study the 2D linear stability analysis of a deformable solid of a finite height $H$, steadily sliding on top of a rigid solid within a generic rate-and-state friction type constitutive framework, fully accounting for elastodynamic effects. We derive the linear stability spectrum, quantifying the interplay between stabilization related to the frictional constitutive law and destabilization relat… ▽ More We study the 2D linear stability analysis of a deformable solid of a finite height $H$, steadily sliding on top of a rigid solid within a generic rate-and-state friction type constitutive framework, fully accounting for elastodynamic effects. We derive the linear stability spectrum, quantifying the interplay between stabilization related to the frictional constitutive law and destabilization related both to the elastodynamic bi-material coupling between normal stress variations and interfacial slip, and to finite size effects. The stabilizing effects related to the frictional constitutive law include velocity-strengthening friction (i.e.~an increase in frictional resistance with increasing slip velocity, both instantaneous and under steady-state conditions) and a regularized response to normal stress variations. We first consider the small wave-number $k$ limit and demonstrate that homogeneous sliding in this case is universally unstable, independently of the details of the friction law. This universal instability is mediated by propagating waveguide-like modes, whose fastest growing mode is characterized by a wave-number satisfying $k H\!\sim\!{\cal O}(1)$ and by a growth rate that scales with $H^{-1}$. We then consider the limit $k H\!\to\!\infty$ and derive the stability phase diagram in this case. We show that the dominant instability mode travels at nearly the dilatational wave-speed in the opposite direction to the sliding direction. Instability modes which travel at nearly the shear wave-speed in the sliding direction also exist in some range of physical parameters. Finally, we show that a finite-time regularized response to normal stress variations, within the framework of generalized rate-and-state friction models, tends to promote stability. △ Less

Submitted 1 July, 2015; originally announced July 2015.

Comments: 37 pages, 9 figures

Journal ref: Journal of the Mechanics and Physics of Solids 89, 149 (2016)

Elimination of surface diffusion in the non-diagonal phase field model

Authors: G. Boussinot, Efim A. Brener, C. Hueter, R. Spatschek

Abstract: We present a non-diagonal phase field model for phase transformations with unequal but finite diffusivities in the two phases. This model allows to recover the desired boundary conditions at the interface, and especially the elimination of the artificial surface diffusion effect. The model is non-diagonal since it incorporates the kinetic cross coupling between the non-conserved and the conserved… ▽ More We present a non-diagonal phase field model for phase transformations with unequal but finite diffusivities in the two phases. This model allows to recover the desired boundary conditions at the interface, and especially the elimination of the artificial surface diffusion effect. The model is non-diagonal since it incorporates the kinetic cross coupling between the non-conserved and the conserved fields that was recently introduced [{Phys. Rev. E {\bf 86}, 060601(R), (2012)}]. We test numerically this model for the two-dimensional relaxation of a weakly perturbed interface toward its flat equilibrium. △ Less

Submitted 3 November, 2014; originally announced November 2014.

Elastic and plastic effects on heterogeneous nucleation and nanowire formation

Authors: G. Boussinot, R. Schulz, C. Hüter, E. A. Brener, R. Spatschek

Abstract: We investigate theoretically the effects of elastic and plastic deformations on heterogeneous nucleation and nanowire formation. In the first case, the influence of the confinement of the critical nucleus between two parallel misfitting substrates is investigated using scaling arguments. We present phase diagrams giving the nature of the nucleation regime as a function of the driving force and the… ▽ More We investigate theoretically the effects of elastic and plastic deformations on heterogeneous nucleation and nanowire formation. In the first case, the influence of the confinement of the critical nucleus between two parallel misfitting substrates is investigated using scaling arguments. We present phase diagrams giving the nature of the nucleation regime as a function of the driving force and the degree of confinement. We complement this analytical study by amplitude equations simulations. In the second case, the influence of a screw dislocation inside a nanowire on the development of the morphological surface stability of the wire, related to the Rayleigh-Plateau instability, is examined. Here the screw dislocation provokes a torsion of the wire known as Eshelby twist. Numerical calculations using the finite element method and the amplitude equations are performed to support analytical investigations. It is shown that the screw dislocation promotes the Rayleigh-Plateau instability. △ Less

Submitted 4 August, 2014; originally announced August 2014.

Comments: 16 pages

Journal ref: Eur. Phys. J. Special Topics 223, 527 (2014)

Velocity-strengthening friction significantly affects interfacial dynamics, strength and dissipation

Authors: Yohai Bar-Sinai, Robert Spatschek, Efim A. Brener, Eran Bouchbinder

Abstract: Frictional interfaces are abundant in natural and manmade systems and their dynamics still pose challenges of fundamental and technological importance. A recent extensive compilation of multiple-source experimental data has revealed that velocity-strengthening friction, where the steady-state frictional resistance increases with sliding velocity over some range, is a generic feature of such interf… ▽ More Frictional interfaces are abundant in natural and manmade systems and their dynamics still pose challenges of fundamental and technological importance. A recent extensive compilation of multiple-source experimental data has revealed that velocity-strengthening friction, where the steady-state frictional resistance increases with sliding velocity over some range, is a generic feature of such interfaces. Moreover, velocity-strengthening friction has very recently been linked to slow laboratory earthquakes and stick-slip motion. Here we elucidate the importance of velocity-strengthening friction by theoretically studying three variants of a realistic rate-and-state friction model. All variants feature identical logarithmic velocity-weakening friction at small sliding velocities, but differ in their higher velocity behaviors. By quantifying energy partition (e.g. radiation and dissipation), the selection of interfacial rupture fronts and rupture arrest, we show that the presence or absence of velocity-strengthening friction can significantly affect the global interfacial resistance and the total energy released during frictional instabilities ("event magnitude"). Furthermore, we show that different forms of velocity-strengthening friction (e.g. logarithmic vs. linear) may result in events of similar magnitude, yet with dramatically different dissipation and radiation rates. This happens because the events are mediated by interfacial rupture fronts with vastly different propagation velocities, where stronger velocity-strengthening friction promotes slower rupture. These theoretical results may have significant implications on our understanding of frictional dynamics. △ Less

Submitted 16 July, 2014; originally announced July 2014.

Comments: 9 pages, 6 figures

Journal ref: Sci. Rep. 5, 7841 (2015)

The influence of short range forces on melting along grain boundaries

Authors: C. Hüter, F. Twiste, R. Spatschek, J. Neugebauer, E. A. Brener

Abstract: We investigate a model which couples diffusional melting and nanoscale structural forces via a combined nano-mesoscale description. Specifically, we obtain analytic and numerical solutions for melting processes at grain boundaries influenced by structural disjoining forces in the experimentally relevant regime of small deviations from the melting temperature. Though spatially limited to the close… ▽ More We investigate a model which couples diffusional melting and nanoscale structural forces via a combined nano-mesoscale description. Specifically, we obtain analytic and numerical solutions for melting processes at grain boundaries influenced by structural disjoining forces in the experimentally relevant regime of small deviations from the melting temperature. Though spatially limited to the close vicinity of the tip of the propagating melt finger, the influence of the disjoining forces is remarkable and leads to a strong modification of the penetration velocity. The problem is represented in terms of a sharp interface model to capture the wide range of relevant length scales, predicting the growth velocity and the length scale describing the pattern, depending on temperature, grain boundary energy, strength and length scale of the exponential decay of the disjoining potential. Close to equilibrium the short-range effects near the triple junctions can be expressed through a contact angle renormalisation in a mesoscale formulation. For higher driving forces strong deviations are found, leading to a significantly higher melting velocity than predicted from a purely mesoscopic description. △ Less

Submitted 27 March, 2014; originally announced March 2014.

Comments: 10 pages

Achieving realistic interface kinetics in phase field models with a diffusional contrast

Authors: G. Boussinot, Efim A. Brener

Abstract: Phase field models are powerful tools to tackle free boundary problems. For phase transformations involving diffusion, the evolution of the non conserved phase field is coupled to the evolution of the conserved diffusion field. Introducing the kinetic cross coupling between these two fields [E. A. Brener, G. Boussinot, Phys. Rev. E {\bf 86}, 060601(R) (2012)], we solve the long-standing problem of… ▽ More Phase field models are powerful tools to tackle free boundary problems. For phase transformations involving diffusion, the evolution of the non conserved phase field is coupled to the evolution of the conserved diffusion field. Introducing the kinetic cross coupling between these two fields [E. A. Brener, G. Boussinot, Phys. Rev. E {\bf 86}, 060601(R) (2012)], we solve the long-standing problem of a realistic description of interface kinetics when a diffusional contrast between the phases is taken into account. Using the case of the solidification of a pure substance, we show how to eliminate the temperature jump at the interface and to recover full equilibrium boundary conditions. We confirm our results by numerical simulations. △ Less

Submitted 11 February, 2014; originally announced February 2014.

On the velocity-strengthening behavior of dry friction

Authors: Yohai Bar-Sinai, Robert Spatschek, Efim A. Brener, Eran Bouchbinder

Abstract: The onset of frictional instabilities, e.g. earthquakes nucleation, is intimately related to velocity-weakening friction, in which the frictional resistance of interfaces decreases with increasing slip velocity. While this frictional response has been studied extensively, less attention has been given to steady-state velocity-strengthening friction, in spite of its potential importance for various… ▽ More The onset of frictional instabilities, e.g. earthquakes nucleation, is intimately related to velocity-weakening friction, in which the frictional resistance of interfaces decreases with increasing slip velocity. While this frictional response has been studied extensively, less attention has been given to steady-state velocity-strengthening friction, in spite of its potential importance for various aspects of frictional phenomena such as the propagation speed of interfacial rupture fronts and the amount of stored energy released by them. In this note we suggest that a crossover from steady-state velocity-weakening friction at small slip velocities to steady-state velocity-strengthening friction at higher velocities might be a generic feature of dry friction. We further argue that while thermally activated rheology naturally gives rise to logarithmic steady-state velocity-strengthening friction, a crossover to stronger-than-logarithmic strengthening might take place at higher slip velocities, possibly accompanied by a change in the dominant dissipation mechanism. We sketch a few physical mechanisms that may account for the crossover to stronger-than-logarithmic steady-state velocity-strengthening and compile a rather extensive set of experimental data available in the literature, lending support to these ideas. △ Less

Submitted 15 April, 2014; v1 submitted 6 August, 2013; originally announced August 2013.

Comments: Updated to published version: 2 Figures and a section added

Journal ref: J. Geophys. Res. Solid Earth, 119, 1738-1748, (2014)

Instabilities at Frictional Interfaces: Creep Patches, Nucleation and Rupture Fronts

Authors: Yohai Bar-Sinai, Robert Spatschek, Efim A. Brener, Eran Bouchbinder

Abstract: The strength and stability of frictional interfaces, ranging from tribological systems to earthquake faults, are intimately related to the underlying spatially-extended dynamics. Here we provide a comprehensive theoretical account, both analytic and numeric, of spatiotemporal interfacial dynamics in a realistic rate-and-state friction model, featuring both velocity-weakening and strengthening beha… ▽ More The strength and stability of frictional interfaces, ranging from tribological systems to earthquake faults, are intimately related to the underlying spatially-extended dynamics. Here we provide a comprehensive theoretical account, both analytic and numeric, of spatiotemporal interfacial dynamics in a realistic rate-and-state friction model, featuring both velocity-weakening and strengthening behaviors. Slowly extending, loading-rate dependent, creep patches undergo a linear instability at a critical nucleation size, which is nearly independent of interfacial history, initial stress conditions and velocity-strengthening friction. Nonlinear propagating rupture fronts -- the outcome of instability -- depend sensitively on the stress state and velocity-strengthening friction. Rupture fronts span a wide range of propagation velocities and are related to steady state fronts solutions. △ Less

Submitted 16 December, 2013; v1 submitted 16 June, 2013; originally announced June 2013.

Comments: Typos and figures corrected. Supplementary information at: http://www.weizmann.ac.il/chemphys/bouchbinder/frictional_instabilities.html

Journal ref: Phys. Rev. E 88, 060403(R) (2013)

Interface kinetics in phase field models: isothermal transformations in binary alloys and steps dynamics in molecular-beam-epitaxy

Authors: G. Boussinot, Efim A. Brener

Abstract: We present a unified description of interface kinetic effects in phase field models for isothermal transformations in binary alloys and steps dynamics in molecular-beam-epitaxy. The phase field equations of motion incorporate a kinetic cross-coupling between the phase field and the concentration field. This cross coupling generalizes the phenomenology of kinetic effects and was omitted until recen… ▽ More We present a unified description of interface kinetic effects in phase field models for isothermal transformations in binary alloys and steps dynamics in molecular-beam-epitaxy. The phase field equations of motion incorporate a kinetic cross-coupling between the phase field and the concentration field. This cross coupling generalizes the phenomenology of kinetic effects and was omitted until recently in classical phase field models. We derive general expressions (independent of the details of the phase field model) for the kinetic coefficients within the corresponding macroscopic approach using a physically motivated reduction procedure. The latter is equivalent to the so-called thin interface limit but is technically simpler. It involves the calculation of the effective dissipation that can be ascribed to the interface in the phase field model. We discuss in details the possibility of a non positive definite matrix of kinetic coefficients, i.e. a negative effective interface dissipation, although being in the range of stability of the underlying phase field model. Numerically, we study the step-bunching instability in molecular-beam-epitaxy due to the Ehrlich-Schwoebel effect, present in our model due to the cross-coupling. Using the reduction procedure we compare the results of the phase field simulations with the analytical predictions of the macroscopic approach. △ Less

Submitted 11 February, 2014; v1 submitted 22 May, 2013; originally announced May 2013.

Kinetic cross coupling between non-conserved and conserved fields in phase field models

Authors: Efim A. Brener, G. Boussinot

Abstract: We present a phase field model for isothermal transformations of two component alloys that includes Onsager kinetic cross coupling between the non-conserved phase field and the conserved concentration field. We also provide the reduction of the phase field model to the corresponding macroscopic description of the free boundary problem. The reduction is given in a general form. Additionally we use… ▽ More We present a phase field model for isothermal transformations of two component alloys that includes Onsager kinetic cross coupling between the non-conserved phase field and the conserved concentration field. We also provide the reduction of the phase field model to the corresponding macroscopic description of the free boundary problem. The reduction is given in a general form. Additionally we use an explicit example of a phase field model and check that the reduced macroscopic description, in the range of its applicability, is in excellent agreement with direct phase field simulations. The relevance of the newly introduced terms to solute trap** is also discussed. △ Less

Submitted 2 July, 2012; originally announced July 2012.

Journal ref: Physical Review E, 86 060601 (R) (2012)

Onsager approach to 1D solidification problem and its relation to phase field description

Authors: Efim A. Brener, D. E. Temkin

Abstract: We give a general phenomenological description of the steady state 1D front propagation problem in two cases: the solidification of a pure material and the isothermal solidification of two component dilute alloys. The solidification of a pure material is controlled by the heat transport in the bulk and the interface kinetics. The isothermal solidification of two component alloys is controlled… ▽ More We give a general phenomenological description of the steady state 1D front propagation problem in two cases: the solidification of a pure material and the isothermal solidification of two component dilute alloys. The solidification of a pure material is controlled by the heat transport in the bulk and the interface kinetics. The isothermal solidification of two component alloys is controlled by the diffusion in the bulk and the interface kinetics. We find that the condition of positive-definiteness of the symmetric Onsager matrix of interface kinetic coefficients still allows an arbitrary sign of the slope of the velocity-concentration line near the solidus in the alloy problem or of the velocity-temperature line in the case of solidification of a pure material. This result offers a very simple and elegant way to describe the interesting phenomenon of a possible non-single-value behavior of velocity versus concentration which has previously been discussed by different approaches. We also discuss the relation of this Onsager approach to the thin interface limit of the phase field description. △ Less

Submitted 13 December, 2011; originally announced December 2011.

Comments: 5 pages, 1 figure, submitted to Physical Review E

Slow rupture of frictional interfaces

Authors: Yohai Bar Sinai, Efim A. Brener, Eran Bouchbinder

Abstract: The failure of frictional interfaces and the spatiotemporal structures that accompany it are central to a wide range of geophysical, physical and engineering systems. Recent geophysical and laboratory observations indicated that interfacial failure can be mediated by slow slip rupture phenomena which are distinct from ordinary, earthquake-like, fast rupture. These discoveries have influenced the w… ▽ More The failure of frictional interfaces and the spatiotemporal structures that accompany it are central to a wide range of geophysical, physical and engineering systems. Recent geophysical and laboratory observations indicated that interfacial failure can be mediated by slow slip rupture phenomena which are distinct from ordinary, earthquake-like, fast rupture. These discoveries have influenced the way we think about frictional motion, yet the nature and properties of slow rupture are not completely understood. We show that slow rupture is an intrinsic and robust property of simple non-monotonic rate-and-state friction laws. It is associated with a new velocity scale $c_{min}$, determined by the friction law, below which steady state rupture cannot propagate. We further show that rupture can occur in a continuum of states, spanning a wide range of velocities from $c_{min}$ to elastic wave-speeds, and predict different properties for slow rupture and ordinary fast rupture. Our results are qualitatively consistent with recent high-resolution laboratory experiments and may provide a theoretical framework for understanding slow rupture phenomena along frictional interfaces. △ Less

Submitted 4 July, 2013; v1 submitted 14 November, 2011; originally announced November 2011.

Comments: 6 pages, 4 figures, 1 table (Supplementary material: 5 pages, 2 figures)

Journal ref: Geophys. Res. Lett., 39, L03308, 2012

Viscoelastic Fracture of Biological Composites

Authors: Eran Bouchbinder, Efim A. Brener

Abstract: Soft constituent materials endow biological composites, such as bone, dentin and nacre, with viscoelastic properties that may play an important role in their remarkable fracture resistance. In this paper we calculate the scaling properties of the quasi-static energy release rate and the viscoelastic contribution to the fracture energy of various biological composites, using both perturbative and n… ▽ More Soft constituent materials endow biological composites, such as bone, dentin and nacre, with viscoelastic properties that may play an important role in their remarkable fracture resistance. In this paper we calculate the scaling properties of the quasi-static energy release rate and the viscoelastic contribution to the fracture energy of various biological composites, using both perturbative and non-perturbative approaches. We consider coarse-grained descriptions of three types of anisotropic structures: (i) Liquid-crystal-like composites (ii) Stratified composites (iii) Staggered composites, for different crack orientations. In addition, we briefly discuss the implications of anisotropy for fracture criteria. Our analysis highlights the dominant lengthscales and scaling properties of viscoelastic fracture of biological composites. It may be useful for evaluating crack velocity toughening effects and structure-dissipation relations in these materials. △ Less

Submitted 5 April, 2011; originally announced April 2011.

Comments: 18 pages, 3 figures

Journal ref: Journal of the Mechanics and Physics of Solids 59, 2279 (2011)

Cracklike Dynamics at the Onset of Frictional Sliding

Authors: Eran Bouchbinder, Efim A. Brener, Itay Barel, Michael Urbakh

Abstract: We propose an elasto-plastic inspired friction model which incorporates interfacial stiffness. Steady state sliding friction is characterized by a generic nonmonotonic behavior, including both velocity weakening and strengthening branches. In 1D and upon the application of sideway loading, we demonstrate the existence of transient cracklike fronts whose velocity is independent of sound speed, whic… ▽ More We propose an elasto-plastic inspired friction model which incorporates interfacial stiffness. Steady state sliding friction is characterized by a generic nonmonotonic behavior, including both velocity weakening and strengthening branches. In 1D and upon the application of sideway loading, we demonstrate the existence of transient cracklike fronts whose velocity is independent of sound speed, which we propose to be analogous to the recently discovered slow interfacial rupture fronts. Most importantly, the properties of these transient inhomogeneously loaded fronts are determined by steady state front solutions at the {\em minimum} of the sliding friction law, implying the existence of a new velocity scale and a "forbidden gap" of rupture velocities. We highlight the role played by interfacial stiffness and supplement our analysis with 2D scaling arguments. △ Less

Submitted 21 March, 2011; originally announced March 2011.

Comments: 4 pages, 2 figures

Journal ref: Phys. Rev. Lett. 107, 235501 (2011)

Fracture as a pattern formation process

Authors: M. Fleck, D. Pilipenko, R. Spatschek, E. A. Brener

Abstract: A continuum model of crack propagation is presented and discussed. We obtain steady state solutions with a self-consistently selected propagation velocity and shape of the crack, provided that elastodynamic and viscoelastic effects are taken into account. Two different mechanism of crack propagation, a first order phase transition and surface diffusion are considered, and we discuss different load… ▽ More A continuum model of crack propagation is presented and discussed. We obtain steady state solutions with a self-consistently selected propagation velocity and shape of the crack, provided that elastodynamic and viscoelastic effects are taken into account. Two different mechanism of crack propagation, a first order phase transition and surface diffusion are considered, and we discuss different loading modes. The arising free boundary problems are solved by phase field methods and a sharp interface approach using a multipole expansion technique. △ Less

Submitted 17 December, 2010; originally announced December 2010.

Journal ref: Phys. Rev. E 83 (2011)

Nonlinear Two-Dimensional Green's Function in Smectics

Authors: E A. Brener, V. I. Marchenko, D. Pilipenko

Abstract: The problem of the strain of smectics subjected to a force distributed over a line in the basal plane has been solved. The problem of the strain of smectics subjected to a force distributed over a line in the basal plane has been solved. △ Less

Submitted 21 March, 2010; originally announced March 2010.

Journal ref: Pis'ma Zh. Eksp. Teor. Fiz. vol. 90, 761 (2009)

Pattern formation during diffusion limited transformations in solids

Authors: M. Fleck, C. Hueter, D. Pilipenko, R. Spatschek, E. A. Brener

Abstract: We develop a description of diffusion limited growth in solid-solid transformations, which are strongly influenced by elastic effects. Density differences and structural transformations provoke stresses at interfaces, which affect the phase equilibrium conditions. We formulate equations for the interface kinetics similar to dendritic growth and study the growth of a stable phase from a metastabl… ▽ More We develop a description of diffusion limited growth in solid-solid transformations, which are strongly influenced by elastic effects. Density differences and structural transformations provoke stresses at interfaces, which affect the phase equilibrium conditions. We formulate equations for the interface kinetics similar to dendritic growth and study the growth of a stable phase from a metastable solid in both a channel geometry and in free space. We perform sharp interface calculations based on Green's function methods and phase field simulations, supplemented by analytical investigations. For pure dilatational transformations we find a single growing finger with symmetry breaking at higher driving forces, whereas for shear transformations the emergence of twin structures can be favorable. We predict the steady state shapes and propagation velocities, which can be higher than in conventional dendritic growth. △ Less

Submitted 17 November, 2008; originally announced November 2008.

Comments: submitted to Philosophical Magazine

Theory of dendritic growth in the presence of lattice strain

Authors: D. Pilipenko, E. A. Brener, C. Hueter

Abstract: Elastic effects due to lattice strain modify the local equilibrium condition at the solid-solid interface compared to the classical dendritic growth. Both, the thermal and the elastic fields are eliminated by the Green's function techniques and a closed nonlinear integro-differential equation for the evolution of the interface is derived. In the case of pure dilatation, the elastic effects lead… ▽ More Elastic effects due to lattice strain modify the local equilibrium condition at the solid-solid interface compared to the classical dendritic growth. Both, the thermal and the elastic fields are eliminated by the Green's function techniques and a closed nonlinear integro-differential equation for the evolution of the interface is derived. In the case of pure dilatation, the elastic effects lead only to a trivial shift of the transition temperature while in the case of shear transitions, dendritic patterns are found even for isotropic surface energy. △ Less

Submitted 13 March, 2008; originally announced March 2008.

Crack growth by surface diffusion in viscoelastic media

Authors: R. Spatschek, E. A. Brener, D. Pilipenko

Abstract: We discuss steady state crack growth in the spirit of a free boundary problem. It turns out that mode I and mode III situations are very different from each other: In particular, mode III exhibits a pronounced transition towards unstable crack growth at higher driving forces, and the behavior close to the Griffith point is determined entirely through crack surface dissipation, whereas in mode I… ▽ More We discuss steady state crack growth in the spirit of a free boundary problem. It turns out that mode I and mode III situations are very different from each other: In particular, mode III exhibits a pronounced transition towards unstable crack growth at higher driving forces, and the behavior close to the Griffith point is determined entirely through crack surface dissipation, whereas in mode I the fracture energy is renormalized due to a remaining finite viscous dissipation. Intermediate mixed-mode scenarios allow steady state crack growth with higher velocities, leading to the conjecture that mode I cracks can be unstable with respect to a rotation of the crack front line. △ Less

Submitted 6 March, 2008; originally announced March 2008.

Melting of alloys along grain boundaries

Authors: Efim A. Brener, D. E. Temkin

Abstract: We discuss melting of alloys along grain boundaries as a free boundary problem for two moving solid-liquid interfaces. One of them is the melting front and the other is the solidification front. The presence of the triple junction plays an important role in controlling the velocity of this process. The interfaces strongly interact via the diffusion field in the thin liquid layer between them. In… ▽ More We discuss melting of alloys along grain boundaries as a free boundary problem for two moving solid-liquid interfaces. One of them is the melting front and the other is the solidification front. The presence of the triple junction plays an important role in controlling the velocity of this process. The interfaces strongly interact via the diffusion field in the thin liquid layer between them. In the liquid film migration (LFM) mechanism the system chooses a more efficient kinetic path, which is controlled by diffusion in the liquid film on relatively short distances. However, only weak coherency strain energy is the effective driving force for LFM in the case of melting of one-phase alloys. The process with only one melting front would be controlled by the very slow diffusion in the mother solid phase on relatively large distances. △ Less

Submitted 5 December, 2007; originally announced December 2007.

Comments: submitted to Acta Materialia

Velocity selection problem in the presence of the triple junction

Authors: E. A. Brener, C. Hüter, D. Pilipenko, D. E. Temkin

Abstract: Melting of a bicrystal along the grain boundary is discussed. A triple junction plays a crucial role in the velocity selection problem in this case. In some range of the parameters an entirely analytical solution of this problem is given. This allows to present a transparent picture of the structure of the selection theory. We also discuss the selection problem in the case of the growth of a ``e… ▽ More Melting of a bicrystal along the grain boundary is discussed. A triple junction plays a crucial role in the velocity selection problem in this case. In some range of the parameters an entirely analytical solution of this problem is given. This allows to present a transparent picture of the structure of the selection theory. We also discuss the selection problem in the case of the growth of a ``eutectoid dendrite'' where a triple junction is present because three phases are involved in the eutectoid reaction. △ Less

Submitted 17 April, 2007; originally announced April 2007.

Influence of Strain on the Kinetics of Phase Transitions in Solids

Authors: Efim A. Brener, V. I. Marchenko, R. Spatschek

Abstract: We consider a sharp interface kinetic model of phase transitions accompanied by elastic strain, together with its phase-field realization. Quantitative results for the steady-state growth of a new phase in a strip geometry are obtained and different pattern formation processes in this system are investigated. We consider a sharp interface kinetic model of phase transitions accompanied by elastic strain, together with its phase-field realization. Quantitative results for the steady-state growth of a new phase in a strip geometry are obtained and different pattern formation processes in this system are investigated. △ Less

Submitted 31 August, 2006; originally announced August 2006.

Melting of alloys along the inter-phase boundaries in eutectic and peritectic systems

Authors: Efim A. Brener, D. E. Temkin

Abstract: We discuss a simple model of the melting kinetics along the solid-solid interface in eutectic and peritectic systems. The process is controlled by the diffusion inside the liquid phase and the existence of a triple junction is crucial for the velocity selection problem. Using the lubrication approximation for the diffusion field in the liquid phase we obtain scaling results for the steady-state… ▽ More We discuss a simple model of the melting kinetics along the solid-solid interface in eutectic and peritectic systems. The process is controlled by the diffusion inside the liquid phase and the existence of a triple junction is crucial for the velocity selection problem. Using the lubrication approximation for the diffusion field in the liquid phase we obtain scaling results for the steady-state velocity of the moving pattern depending on the overheating above the equilibrium temperature and on the material parameters of the system, including the dependences on the angles at the triple junction. △ Less

Submitted 25 August, 2006; originally announced August 2006.

Crack propagation as a free boundary problem

Authors: D. Pilipenko, R. Spatschek, E. A. Brener, H. Müller-Krumbhaar

Abstract: A newly developed sharp interface model describes crack propagation by a phase transition process. We solve this free boundary problem numerically and obtain steady state solutions with a self-consistently selected propagation velocity and shape of the crack, provided that elastodynamic effects are taken into account. Also, we find a saturation of the steady state crack velocity below the Raylei… ▽ More A newly developed sharp interface model describes crack propagation by a phase transition process. We solve this free boundary problem numerically and obtain steady state solutions with a self-consistently selected propagation velocity and shape of the crack, provided that elastodynamic effects are taken into account. Also, we find a saturation of the steady state crack velocity below the Rayleigh speed, tip blunting with increasing driving force and a tip splitting instability above a critical driving force. △ Less

Submitted 10 July, 2006; originally announced July 2006.

Elastic domains in antiferromagnets

Authors: Efim A. Brener, V. I. Marchenko

Abstract: We consider periodic domain structures which appear due to the magnetoelastic interaction if the antiferromagnetic crystal is attached to an elastic substrate. The peculiar behavior of such structures in an external magnetic field is discussed. In particular, we find the magnetic field dependence of the equilibrium period and the concentrations of different domains. We consider periodic domain structures which appear due to the magnetoelastic interaction if the antiferromagnetic crystal is attached to an elastic substrate. The peculiar behavior of such structures in an external magnetic field is discussed. In particular, we find the magnetic field dependence of the equilibrium period and the concentrations of different domains. △ Less

Submitted 9 March, 2006; originally announced March 2006.

Condensation and vortex formation in Bose-gas upon cooling

Authors: E. A. Brener, S. V. Iordanskiy, R. B. Saptsov

Abstract: The mechanism for the transition of a Bose gas to the superfluid state via thermal fluctuations is considered. It is shown that in the process of external cooling some critical fluctuations (instantons) are formed above the critical temperature. The probability of the instanton formation is calculated in the three and two-dimensional cases. It is found that this probability increases as the syst… ▽ More The mechanism for the transition of a Bose gas to the superfluid state via thermal fluctuations is considered. It is shown that in the process of external cooling some critical fluctuations (instantons) are formed above the critical temperature. The probability of the instanton formation is calculated in the three and two-dimensional cases. It is found that this probability increases as the system approaches the transition temperature. It is shown that the evolution of an individual instanton is impossible without the formation of vortices in its superfluid part. △ Less

Submitted 30 June, 2005; originally announced June 2005.

Velocity selection problem for combined motion of melting and solidification fronts

Authors: Efim A. Brener, D. E. Temkin

Abstract: We discuss a free boundary problem for two moving solid-liquid interfaces that strongly interact via the diffusion field in the liquid layer between them. This problem arises in the context of liquid film migration (LFM) during the partial melting of solid alloys. In the LFM mechanism the system chooses a more efficient kinetic path which is controlled by diffusion in the liquid film, whereas th… ▽ More We discuss a free boundary problem for two moving solid-liquid interfaces that strongly interact via the diffusion field in the liquid layer between them. This problem arises in the context of liquid film migration (LFM) during the partial melting of solid alloys. In the LFM mechanism the system chooses a more efficient kinetic path which is controlled by diffusion in the liquid film, whereas the process with only one melting front would be controlled by the very slow diffusion in the mother solid phase. The relatively weak coherency strain energy is the effective driving force for LFM. As in the classical dendritic growth problems, also in this case an exact family of steady-state solutions with two parabolic fronts and an arbitrary velocity exists if capillary effects are neglected. We develop a velocity selection theory for this problem, including anisotropic surface tension effects. The strong diffusion interaction and coherency strain effects in the solid near the melting front lead to substantial changes compared to classical dendritic growth. △ Less

Submitted 21 January, 2005; originally announced January 2005.

Comments: submitted to PRL

Fracture and Friction: Stick-Slip Motion

Authors: Efim A. Brener, S. V. Malinin, V. I. Marchenko

Abstract: We discuss the stick-slip motion of an elastic block sliding along a rigid substrate. We argue that for a given external shear stress this system shows a discontinuous nonequilibrium transition from a uniform stick state to uniform sliding at some critical stress which is nothing but the Griffith threshold for crack propagation. An inhomogeneous mode of sliding occurs, when the driving velocity… ▽ More We discuss the stick-slip motion of an elastic block sliding along a rigid substrate. We argue that for a given external shear stress this system shows a discontinuous nonequilibrium transition from a uniform stick state to uniform sliding at some critical stress which is nothing but the Griffith threshold for crack propagation. An inhomogeneous mode of sliding occurs, when the driving velocity is prescribed instead of the external stress. A transition to homogeneous sliding occurs at a critical velocity, which is related to the critical stress. We solve the elastic problem for a steady-state motion of a periodic stick-slip pattern and derive equations of motion for the tip and resticking end of the slip pulses. In the slip regions we use the linear viscous friction law and do not assume any intrinsic instabilities even at small sliding velocities. We find that, as in many other pattern forming system, the steady-state analysis itself does not select uniquely all the internal parameters of the pattern, especially the primary wavelength. Using some plausible analogy to first order phase transitions we discuss a ``soft'' selection mechanism. This allows to estimate internal parameters such as crack velocities, primary wavelength and relative fraction of the slip phase as function of the driving velocity. The relevance of our results to recent experiments is discussed. △ Less

Submitted 18 November, 2004; originally announced November 2004.

Comments: 12 pages, 7 figures

Fast crack propagation by surface diffusion

Authors: Efim A. Brener, Robert Spatschek

Abstract: We present a continuum theory which describes the fast growth of a crack by surface diffusion. This mechanism overcomes the usual cusp singularity by a self-consistent selection of the crack tip radius. It predicts the saturation of the steady state crack velocity appreciably below the Rayleigh speed and tip blunting. Furthermore, it includes the possibility of a tip splitting instability for hi… ▽ More We present a continuum theory which describes the fast growth of a crack by surface diffusion. This mechanism overcomes the usual cusp singularity by a self-consistent selection of the crack tip radius. It predicts the saturation of the steady state crack velocity appreciably below the Rayleigh speed and tip blunting. Furthermore, it includes the possibility of a tip splitting instability for high applied tensions. △ Less

Submitted 2 April, 2002; originally announced April 2002.

Frictional shear cracks

Authors: Efim A. Brener, V. I. Marchenko

Abstract: We discuss crack propagation along the interface between two dissimilar materials. The crack edge separates two states of the interface, ``stick'' and ``slip''. In the slip region we assume that the shear stress is proportional to the sliding velocity, i.e. the linear viscous friction law. In this picture the static friction appears as the Griffith threshold for crack propagation. We calculate t… ▽ More We discuss crack propagation along the interface between two dissimilar materials. The crack edge separates two states of the interface, ``stick'' and ``slip''. In the slip region we assume that the shear stress is proportional to the sliding velocity, i.e. the linear viscous friction law. In this picture the static friction appears as the Griffith threshold for crack propagation. We calculate the crack velocity as a function of the applied shear stress and find that the main dissipation comes from the macroscopic region and is mainly due to the friction at the interface. The relevance of our results to recent experiments, Baumberger et al, Phys. Rev. Lett. 88, 075509 (2002), is discussed. △ Less

Submitted 2 April, 2002; originally announced April 2002.

Comment on ``Solidification of a Supercooled Liquid in a Narrow Channel''

Authors: Efim A. Brener, David A. Kessler

Abstract: Comment on PRL v. 86, p. 5084 (2001) [cond-mat/0101016]. We point out that the authors' simulations are consistent with the known theory of steady-state solutions in this system. Comment on PRL v. 86, p. 5084 (2001) [cond-mat/0101016]. We point out that the authors' simulations are consistent with the known theory of steady-state solutions in this system. △ Less

Submitted 26 July, 2001; originally announced July 2001.