-
Microstructural and Micromechanical Evolution of Olivine Aggregates During Transient Creep
Authors:
Harison S. Wiesman,
Thomas Breithaupt,
David Wallis,
Lars N. Hansen
Abstract:
To examine the microstructural evolution that occurs during transient creep, we deformed olivine aggregates to different strains that spanned the initial transient deformation. Two sets of samples with different initial grain sizes of 5 $μ$m and 20 $μ$m were deformed in torsion at T = 1523 K, P = 300 MPa, and a constant shear strain rate of 1.5 $\times$ 10$^{-4}$ s$^{-1}$. Both sets of samples exp…
▽ More
To examine the microstructural evolution that occurs during transient creep, we deformed olivine aggregates to different strains that spanned the initial transient deformation. Two sets of samples with different initial grain sizes of 5 $μ$m and 20 $μ$m were deformed in torsion at T = 1523 K, P = 300 MPa, and a constant shear strain rate of 1.5 $\times$ 10$^{-4}$ s$^{-1}$. Both sets of samples experienced strain hardening during deformation. We characterized the microstructures at the end of each experiment using high-angular resolution electron backscatter diffraction (HR-EBSD) and dislocation decoration. In the coarse-grained samples, dislocation density increased from 1.5 $\times$ 10$^{11}$ m$^{-2}$ to 3.6 $\times$ 10$^{12}$ m$^{-2}$ with strain. Although the same final dislocation density was reached in the fine-grained samples, it did not vary significantly at small strains, potentially due to concurrent grain growth during deformation. In both sets of samples, HR-EBSD analysis revealed that intragranular stress heterogeneity increased in magnitude with strain and that elevated stresses are associated with regions of high geometrically necessary dislocation density. Further analysis of the stresses and their probability distributions indicate that the stresses are imparted by long-range elastic interactions among dislocations. These characteristics indicate that dislocation interactions were the primary cause of strain hardening during transient creep. A comparison of the results to predictions from three recent models reveals that the models do not correctly predict the evolution in stress and dislocation density with strain for our experiments due to a lack of previous such data in their calibrations.
△ Less
Submitted 6 July, 2024;
originally announced July 2024.
-
Mild-to-wild plasticity of Earth's upper mantle
Authors:
David Wallis,
Kathryn M. Kumamoto,
Thomas Breithaupt
Abstract:
The flow of Earth's upper mantle has long been considered to occur by slow and near-continuous creep. Such behaviour is observed in classical high-temperature deformation experiments and is a fundamental component of geodynamic models. However, the latest generation of high-resolution experiments, capable of sensing temporal heterogeneities in rates of dislocation motion, have revealed that materi…
▽ More
The flow of Earth's upper mantle has long been considered to occur by slow and near-continuous creep. Such behaviour is observed in classical high-temperature deformation experiments and is a fundamental component of geodynamic models. However, the latest generation of high-resolution experiments, capable of sensing temporal heterogeneities in rates of dislocation motion, have revealed that materials ranging from metals to ice exhibit a spectrum of behaviours termed mild-to-wild plasticity. It remains unknown whether olivine, the most abundant mineral in Earth's upper mantle, always exhibits mild continuous flow or can exhibit intermittent wild fluctuations in plastic strain rate. Here, we demonstrate that olivine exhibits measurable wildness, even under conditions at which its behaviour is predicted to be relatively mild. During nanoindentation experiments conducted at room temperature, continuous plastic flow is punctuated by intermittent bursts of displacement with log-normally distrubuted magnitudes, indicating avalanches of correlated dislocation motion that account for approximately 8 +/- 6% of the plastic strain. Remarkably, the framework of mild-to-wild plasticity predicts that wildness should increase with depth in the Earth, with flow of the asthenospheric upper mantle occurring almost entirely by wild fluctuations of deformation at the grain scale. The recognition of intermittent plasticity in geological materials provides new constraints for microphysical models of dislocation-mediated flow and raises questions about the mehcanisms of transient instabilities in otherwise ductile regimes, such as deep earthquakes and slow-slip events.
△ Less
Submitted 14 June, 2024;
originally announced June 2024.
-
Transient and steady-state dislocation creep of olivine controlled by dislocation interactions at the isostress endmember
Authors:
David Wallis,
Thomas Breithaupt,
Taco Broerse
Abstract:
The rheological behaviour of olivine deforming by dislocation creep controls geodynamic processes that involve steady-state flow or transient viscosity evolution. Longstanding rheological models applied to both contexts assume that dislocation creep of olivine aggregates occurs close to the isostrain endmember with each grain deforming to the same strain but supporting different stress. Here, we t…
▽ More
The rheological behaviour of olivine deforming by dislocation creep controls geodynamic processes that involve steady-state flow or transient viscosity evolution. Longstanding rheological models applied to both contexts assume that dislocation creep of olivine aggregates occurs close to the isostrain endmember with each grain deforming to the same strain but supporting different stress. Here, we test this assumption by constructing isostrain and isostress models based on flow laws for single crystals and comparing them to rheological data for aggregates. This analysis reveals that strain rates measured on olivine aggregates agree with those predicted by the isostress model but are an order of magnitude faster than those predicted by the isostrain model. When extrapolated to conditions typical of the shallow upper mantle, the isostress model predicts steady-state viscosities that are one to three orders of magnitude less than those predicted by the isostrain model. Furthermore, deformation close to the isostress endmember implies that transient creep occurs predominantly by dislocation interactions, suggesting viscosity changes that are approximately one order of magnitude greater than those predicted previously based on grain interactions associated with the isostrain model.
△ Less
Submitted 14 June, 2024;
originally announced June 2024.
-
The role of grain-environment heterogeneity in normal grain growth: a stochastic approach
Authors:
Thomas Breithaupt,
Lars N. Hansen,
Srikanth Toppaladoddi,
Richard F. Katz
Abstract:
The size distribution of grains is a fundamental characteristic of polycrystalline solids. In the absence of deformation, the grain-size distribution is controlled by normal grain growth. The canonical model of normal grain growth, developed by Hillert, predicts a grain-size distribution that bears a systematic discrepancy with observed distributions. To address this, we propose a change to the Hi…
▽ More
The size distribution of grains is a fundamental characteristic of polycrystalline solids. In the absence of deformation, the grain-size distribution is controlled by normal grain growth. The canonical model of normal grain growth, developed by Hillert, predicts a grain-size distribution that bears a systematic discrepancy with observed distributions. To address this, we propose a change to the Hillert model that accounts for the influence of heterogeneity in the local environment of grains. In our model, each grain evolves in response to its own local environment of neighbouring grains, rather than to the global population of grains. The local environment of each grain evolves according to an Ornstein-Uhlenbeck stochastic process. Our results are consistent with accepted grain-growth kinetics. Crucially, our model indicates that the size of relatively large grains evolves as a random walk due to the inherent variability in their local environments. This leads to a broader grain-size distribution than the Hillert model and indicates that heterogeneity has a critical influence on the evolution of microstructure.
△ Less
Submitted 2 February, 2021;
originally announced February 2021.
-
Hybrid sideways/longitudinal swimming in the monoflagellate Shewanella oneidensis: from aerotactic band to biofilm
Authors:
Laura Stricker,
Isabella Guido,
Thomas Breithaupt,
Marco G. Mazza,
Jürgen Vollmer
Abstract:
Shewanella oneidensis MR-1 are facultative aerobic electroactive bacteria, with an appealing potential for sustainable energy production and bioremediation. They gather around air sources, forming aerotactic bands and biofilms. Though accumulation is crucial to technological exploitation, their collective behaviour remains poorly reported. Here we establish a comprehensive framework for the study…
▽ More
Shewanella oneidensis MR-1 are facultative aerobic electroactive bacteria, with an appealing potential for sustainable energy production and bioremediation. They gather around air sources, forming aerotactic bands and biofilms. Though accumulation is crucial to technological exploitation, their collective behaviour remains poorly reported. Here we establish a comprehensive framework for the study of aerotaxis, unveiling a novel hybrid locomotion pattern. Despite having only one flagellum, MR-1 combine motility features of mono- and multiflagellate bacteria, alternating longitudinal fast and sideways slow swimming. The adaptive tuning of the resulting bimodal velocity distributions fulfils different biological functions, such as aerotaxis and confinement. Overall, we reveal the mechanisms underlying the aerotactic collective behaviour of MR-1, in the process leading from accumulation to biofilm formation
△ Less
Submitted 22 October, 2019;
originally announced October 2019.
-
Dislocation interactions during low-temperature plasticity of olivine strengthen the lithospheric mantle
Authors:
David Wallis,
Lars. N. Hansen,
Kathryn M. Kumamoto,
Christopher A. Thom,
Oliver Plümper,
Markus Ohl,
William B. Durham,
David L. Goldsby,
David E. J. Armstrong,
Cameron D. Meyers,
Rellie Goddard,
Jessica M. Warren,
Thomas Breithaupt,
Martyn R. Drury,
Angus J. Wilkinson
Abstract:
The strength of the lithosphere is typically modelled based on constitutive equations for steady-state flow. However, models of lithospheric flexure reveal differences in lithospheric strength that are difficult to reconcile based on such flow laws. Recent rheological data from low-temperature deformation experiments on olivine suggest that this discrepancy may be largely explained by strain harde…
▽ More
The strength of the lithosphere is typically modelled based on constitutive equations for steady-state flow. However, models of lithospheric flexure reveal differences in lithospheric strength that are difficult to reconcile based on such flow laws. Recent rheological data from low-temperature deformation experiments on olivine suggest that this discrepancy may be largely explained by strain hardening. Details of the mechanical data, specifically the effects of temperature-independent back stresses stored in the samples, indicate that strain hardening in olivine occurs primarily due to long-range elastic interactions between dislocations. These interpretations provided the basis for a new flow law that incorporates hardening by development of back stress. Here, we test this hypothesis by examining the microstructures of olivine samples deformed plastically at room temperature either in a deformation-DIA apparatus at differential stresses of < 4.3 GPa or in a nanoindenter at applied contact stresses of > 10.2 GPa. High-angular resolution electron backscatter diffraction maps reveal the presence of geometrically necessary dislocations with densities commonly above 10$^{14}$ m$^{-2}$ and intragranular heterogeneities in residual stress on the order of 1 GPa in both sets of samples. Scanning transmission electron micrographs reveal straight dislocations aligned along slip bands and interacting with dislocations of other types that act as obstacles. The stress heterogeneities and accumulations of dislocations along their slip planes are consistent with strain hardening resulting from long-range back-stresses acting between dislocations. These results corroborate the mechanical data in supporting the form of the new flow law for low-temperature plasticity and provide new microstructural criteria for identifying the operation of this deformation mechanism in natural samples.
△ Less
Submitted 18 September, 2019;
originally announced September 2019.
-
The flow generated by an active olfactory system of the red swamp crayfish
Authors:
P. Denissenko,
S. Lukaschuk,
T. Breithaupt
Abstract:
Crayfish are nocturnal animals that mainly rely on their chemoreceptors to locate food. On a crayfish scale chemical stimuli received from a distant source are dispersed by an ambient flow rather than molecular diffusion. When the flow is weak or absent, food search can be facilitated by currents generated by the animal itself. Crayfish employ their anterior fan organs to produce a variety of fl…
▽ More
Crayfish are nocturnal animals that mainly rely on their chemoreceptors to locate food. On a crayfish scale chemical stimuli received from a distant source are dispersed by an ambient flow rather than molecular diffusion. When the flow is weak or absent, food search can be facilitated by currents generated by the animal itself. Crayfish employ their anterior fan organs to produce a variety of flow patterns. Here we study the flow generated by Procambarus clarkii in response to odour stimulation. We found that while searching for food the crayfish generates one or two outward jets. These jets create an inflow which draws odour to the crayfish's anterior chemoreceptors. We quantified velocity fields in the inflow region using Particle Image Velocimetry. The results show that the inflow velocity decreases proportionally to the inverse distance from the animal so that it takes about a minute for an odour plume to reach the animal's chemoreceptors from a distance of 10 cm. We compare the inflow generated by live crayfish with that produced by a mimicking device, a phantom. The phantom consisted of two nozzles and an inlet providing two jets and a sink so that the overall mass flux was zero. The use of a phantom enabled us to analyze the inflow at various jet parameters. We showed that variation of the jets' directions and relative intensities allows changing the direction of odour attraction. These results provide a rationale for biomimetic robot design. We discuss sensitivity and efficiency of such a robot.
△ Less
Submitted 21 June, 2007; v1 submitted 10 October, 2006;
originally announced October 2006.