-
Giant negative electrostriction and dielectric tunability in a van der Waals layered ferroelectric
Authors:
Sabine M. Neumayer,
Eugene A. Eliseev,
Michael A. Susner,
Alexander Tselev,
Brian J. Rodriguez,
John A. Brehm,
Sokrates T. Pantelides,
Ganesh Panchapakesan,
Stephen Jesse,
Sergei V. Kalinin,
Michael A. McGuire,
Anna N. Morozovska,
Petro Maksymovych,
Nina Balke
Abstract:
The interest in ferroelectric van der Waals crystals arises from the potential to realize ultrathin ferroic systems owing to the reduced surface energy of these materials and the layered structure that allows for exfoliation. Here, we quantitatively unravel giant negative electrostriction of van der Waals layered copper indium thiophosphate (CIPS), which exhibits an electrostrictive coefficient Q3…
▽ More
The interest in ferroelectric van der Waals crystals arises from the potential to realize ultrathin ferroic systems owing to the reduced surface energy of these materials and the layered structure that allows for exfoliation. Here, we quantitatively unravel giant negative electrostriction of van der Waals layered copper indium thiophosphate (CIPS), which exhibits an electrostrictive coefficient Q33 as high as -3.2 m4/C2 and a resulting bulk piezoelectric coefficient d33 up to -85 pm/V. As a result, the electromechanical response of CIPS is comparable in magnitude to established perovskite ferroelectrics despite possessing a much smaller spontaneous polarization of only a few uC/cm2. In the paraelectric state, readily accessible owing to low transition temperatures, CIPS exhibits large dielectric tunability, similar to widely-used barium strontium titanate, and as a result both giant and continuously tunable electromechanical response. The persistence of electrostrictive and tunable responses in the paraelectric state indicates that even few layer films or nanoparticles will sustain significant electromechanical functionality, offsetting the inevitable suppression of ferroelectric properties in the nanoscale limit. These findings can likely be extended to other ferroelectric transition metal thiophosphates and (quasi-) two-dimensional materials and might facilitate the quest towards novel ultrathin functional devices incorporating electromechanical response.
△ Less
Submitted 1 February, 2019; v1 submitted 21 March, 2018;
originally announced March 2018.
-
Predicted bulk photovoltaic effect in hydrogenated Zintl compounds
Authors:
John A. Brehm
Abstract:
The bulk photovoltaic effect (BPVE) is a phenomenon which creates a net electrical current from sunlight in a polar noncentrosymmetric material possessing a moderate band gap. This effect is being explored as an alternative to traditional pn-junction solar cells to convert solar energy into electricity. This paper assesses the possibility that hydrogenated Zintl-phase compounds consisting only of…
▽ More
The bulk photovoltaic effect (BPVE) is a phenomenon which creates a net electrical current from sunlight in a polar noncentrosymmetric material possessing a moderate band gap. This effect is being explored as an alternative to traditional pn-junction solar cells to convert solar energy into electricity. This paper assesses the possibility that hydrogenated Zintl-phase compounds consisting only of metal, metalloid, and hydrogen atoms, may be able to provide a BPVE response. Towards this end, the magnitude of the BPVE shift current is calculated for each of the compounds AeTrTtH (Ae = Ca, Sr, and Ba; Tr = Al and Ga; and Tt = Si, Ge, and Sn). For this family of hydogenated Zintl compounds, maximum shift current responses are predicted that are up to eight times greater than that calculated for BiFeO3, and have a significant response down to much lower photon energies than BiFeO3 as well. With band gaps below 1 eV, and with some members of this family of compounds exhibiting stability in air up to 770 K, some of these compounds may find use in photovoltaic devices.
△ Less
Submitted 9 November, 2017;
originally announced November 2017.
-
Substantial optical dielectric enhancement by volume compression in LiAsSe$_2$
Authors:
Fan Zheng,
John A. Brehm,
Steve M. Young,
Youngkuk Kim,
Andrew M. Rappe
Abstract:
Based on first-principles calculations, we predict a substantial increase in the optical dielectric function of LiAsSe$_2$ under pressure. We find that the optical dielectric constant is enhanced threefold under volume compression. This enhancement is mainly due to the dimerization strength reduction of the one-dimensional (1D) As--Se chains in LiAsSe$_2$, which significantly alters the wavefuncti…
▽ More
Based on first-principles calculations, we predict a substantial increase in the optical dielectric function of LiAsSe$_2$ under pressure. We find that the optical dielectric constant is enhanced threefold under volume compression. This enhancement is mainly due to the dimerization strength reduction of the one-dimensional (1D) As--Se chains in LiAsSe$_2$, which significantly alters the wavefunction phase mismatch between two neighboring chains and changes the transition intensity. By develo** a tight-binding model of the interacting 1D chains, the essential features of the low-energy electronic structure of LiAsSe$_2$ are captured. Our findings are important for understanding the fundamental physics of LiAsSe$_2$ and provide a feasible way to enhance the material optical response that can be applied to light harvesting for energy applications.
△ Less
Submitted 28 August, 2015;
originally announced August 2015.
-
First-Principles Calculation of the Bulk Photovoltaic Effect in the Polar Compounds LiAsS$_\text{2}$, LiAsSe$_\text{2}$, and NaAsSe$_\text{2}$
Authors:
John A. Brehm,
Steve M. Young,
Fan Zheng,
Andrew M. Rappe
Abstract:
We calculate the shift current response, which has been identified as the dominant mechanism for the bulk photovoltaic effect, for the polar compounds LiAsS$_\text{2}$, LiAsSe$_\text{2}$, and NaAsSe$_\text{2}$. We find that the magnitudes of the photovoltaic responses in the visible range for these compounds exceed the maximum response obtained for BiFeO$_\text{3}$ by 10 - 20 times. We correlate t…
▽ More
We calculate the shift current response, which has been identified as the dominant mechanism for the bulk photovoltaic effect, for the polar compounds LiAsS$_\text{2}$, LiAsSe$_\text{2}$, and NaAsSe$_\text{2}$. We find that the magnitudes of the photovoltaic responses in the visible range for these compounds exceed the maximum response obtained for BiFeO$_\text{3}$ by 10 - 20 times. We correlate the high shift current response with the existence of $p$ states at both the valence and conduction band edges, as well as the dispersion of these bands, while also showing that high polarization is not a requirement. With low experimental band gaps of less than 2 eV and high shift current response, these materials have potential for use as bulk photovoltaics.
△ Less
Submitted 2 December, 2014; v1 submitted 12 August, 2014;
originally announced August 2014.
-
The Structural Diversity of ABS3 Compounds with d0 Electronic Configuration for the B-cation
Authors:
John A. Brehm,
Joseph W. Bennett,
Michael Rutenberg Schoenberg,
Ilya Grinberg,
Andrew M. Rappe
Abstract:
We use first-principles density functional theory (DFT) within the local density approx- imation (LDA) to ascertain the ground state structure of real and theoretical compounds with the formula ABS3 (A = K, Rb, Cs, Ca, Sr, Ba, Tl, Sn, Pb, and Bi; and B = Sc, Y, Ti, Zr, V, and Nb) under the constraint that B must have a d0 electronic configuration. Our findings indicate that none of these AB combin…
▽ More
We use first-principles density functional theory (DFT) within the local density approx- imation (LDA) to ascertain the ground state structure of real and theoretical compounds with the formula ABS3 (A = K, Rb, Cs, Ca, Sr, Ba, Tl, Sn, Pb, and Bi; and B = Sc, Y, Ti, Zr, V, and Nb) under the constraint that B must have a d0 electronic configuration. Our findings indicate that none of these AB combinations prefer a perovskite ground state with corner-sharing BS6 octahedra, but that they prefer phases with either edge- or face-sharing motifs. Further, a simple two-dimensional structure field map created from A and B ionic radii provides a neat demarcation between combinations preferring face-sharing versus edge- sharing phases for most of these combinations. We then show that by modifying the common Goldschmidt tolerance factor with a multiplicative term based on the electronegativity dif- ference between A and S, the demarcation between predicted edge-sharing and face-sharing ground state phases is enhanced. We also demonstrate that, by calculating the free energy contribution of phonons, some of these compounds may assume multiple phases as synthesis temperatures are altered, or as ambient temperatures rise or fall.
△ Less
Submitted 21 July, 2014; v1 submitted 4 March, 2014;
originally announced March 2014.
-
Density Functional Theory Study Of Hypothetical PbTiO3-Based Oxysulfides
Authors:
John A. Brehm,
Hiroyuki Takenaka,
Chan-Woo Lee,
Ilya Grinberg,
Joseph W. Bennett,
Michael Rutenberg Schoenberg,
Andrew M. Rappe
Abstract:
Using density functional theory (DFT) within the local density approximation (LDA), we calculate the physical and electronic properties of PbTiO3 (PTO) and a series of hypothetical compounds PbTiO3-xSx x = 0.2, 0.25, 0.33, 0.5, 1, 2, and 3 arranged in the corner-sharing cubic perovskite structure. We determine that replacing the apical oxygen atom in the PTO tetragonal unit cell with a sulfur atom…
▽ More
Using density functional theory (DFT) within the local density approximation (LDA), we calculate the physical and electronic properties of PbTiO3 (PTO) and a series of hypothetical compounds PbTiO3-xSx x = 0.2, 0.25, 0.33, 0.5, 1, 2, and 3 arranged in the corner-sharing cubic perovskite structure. We determine that replacing the apical oxygen atom in the PTO tetragonal unit cell with a sulfur atom reduces the x = 0 LDA calculated band gap of 1.47 eV to 0.43 - 0.67 eV for x = 0.2 - 1 and increases the polarization. PBE0 and GW methods predict that the hypothetical compositions x = 0.2 to x = 2 will have band gaps in the visible range. For all values of x < 2, the oxysulfide perovskite retains the tetragonal phase of PbTiO3, and the a-lattice parameter remains within 2.5% of the oxide. Thermodynamic analysis indicates that chemical routes using high temperature gas, such as H2S and CS2, can be used to substitute O for S in PTO for the compositions x = 0.2 - 0.5.
△ Less
Submitted 21 May, 2014; v1 submitted 13 November, 2013;
originally announced November 2013.
