-
Study of selected mild steels for application in vacuum systems of future gravitational wave detectors
Authors:
Carlo Scarcia,
Giuseppe Bregliozzi,
Paolo Chiggiato,
Alice Ingrid Michet,
Ana Teresa Perez Fontenla,
Martino Rimoldi,
Mauro Taborelli,
Ivo Wevers
Abstract:
Next-generation gravitational wave detectors (GWDs) like the Cosmic Explorer and Einstein Telescope require extensive vacuum tubing, necessitating cost-effective materials. This study explores the viability of mild steel as an alternative to austenitic stainless steel for UHV beampipes, focusing on outgassing rates and surface chemistry after low-temperature bakeouts. Mild steels exhibit significa…
▽ More
Next-generation gravitational wave detectors (GWDs) like the Cosmic Explorer and Einstein Telescope require extensive vacuum tubing, necessitating cost-effective materials. This study explores the viability of mild steel as an alternative to austenitic stainless steel for UHV beampipes, focusing on outgassing rates and surface chemistry after low-temperature bakeouts. Mild steels exhibit significantly lower hydrogen outgassing rates, below 10$^{-14}$ mbar l s$^{-1}$ cm$^{-2}$ after bakeouts at 80°C for 48 hours. While water vapor is the primary residual gas after such low-temperature bakeouts, repeated treatments reduce its outgassing rate and modify surface conditions so that such benefit is preserved after at least six months of exposure to laboratory air. These findings position mild steel as an economical and efficient material for future GWD beampipes.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Machine learning for beam dynamics studies at the CERN Large Hadron Collider
Authors:
P. Arpaia,
G. Azzopardi,
F. Blanc,
G. Bregliozzi,
X. Buffat,
L. Coyle,
E. Fol,
F. Giordano,
M. Giovannozzi,
T. Pieloni,
R. Prevete,
S. Redaelli,
B. Salvachua,
B. Salvant,
M. Schenk,
M. Solfaroli Camillocci,
R. Tomàs,
G. Valentino,
F. F. Van der Veken,
J. Wenninger
Abstract:
Machine learning entails a broad range of techniques that have been widely used in Science and Engineering since decades. High-energy physics has also profited from the power of these tools for advanced analysis of colliders data. It is only up until recently that Machine Learning has started to be applied successfully in the domain of Accelerator Physics, which is testified by intense efforts dep…
▽ More
Machine learning entails a broad range of techniques that have been widely used in Science and Engineering since decades. High-energy physics has also profited from the power of these tools for advanced analysis of colliders data. It is only up until recently that Machine Learning has started to be applied successfully in the domain of Accelerator Physics, which is testified by intense efforts deployed in this domain by several laboratories worldwide. This is also the case of CERN, where recently focused efforts have been devoted to the application of Machine Learning techniques to beam dynamics studies at the Large Hadron Collider (LHC). This implies a wide spectrum of applications from beam measurements and machine performance optimisation to analysis of numerical data from tracking simulations of non-linear beam dynamics. In this paper, the LHC-related applications that are currently pursued are presented and discussed in detail, paying also attention to future developments.
△ Less
Submitted 17 September, 2020;
originally announced September 2020.
-
Vacuum Acceptance Tests for Particle Accelerator Equipment
Authors:
G. Bregliozzi
Abstract:
The effective and reliable operation of particle accelerator machines is strongly related to obtaining and kee** the required ultra-high vacuum level. This paper briefly presents some generic requirements to take in consideration for components that need to be installed in a particle accelerator like design constraints, materials choices, chemical cleaning process, outgassing rate, and their pos…
▽ More
The effective and reliable operation of particle accelerator machines is strongly related to obtaining and kee** the required ultra-high vacuum level. This paper briefly presents some generic requirements to take in consideration for components that need to be installed in a particle accelerator like design constraints, materials choices, chemical cleaning process, outgassing rate, and their possible mitigation. Moreover, it will discuss vacuum acceptance tests put in place in the CERN accelerator complex for both, baked and unbaked system.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.