-
DISCUS - The Deep Interior Scanning CubeSat mission to a rubble pile near-Earth asteroid
Authors:
Patrick Bambach,
Jakob Deller,
Esa Vilenius,
Sampsa Pursiainen,
Mika Takala,
Hans Martin Braun,
Harald Lentz,
Manfred Wittig
Abstract:
We have performed an initial stage conceptual design study for the Deep Interior Scanning CubeSat (DISCUS), a tandem 6U CubeSat carrying a bistatic radar as main payload. DISCUS will be operated either as an independent mission or accompanying a larger one. It is designed to determine the internal macroporosity of a 260-600 m diameter Near Earth Asteroid (NEA) from a few kilometers distance. The m…
▽ More
We have performed an initial stage conceptual design study for the Deep Interior Scanning CubeSat (DISCUS), a tandem 6U CubeSat carrying a bistatic radar as main payload. DISCUS will be operated either as an independent mission or accompanying a larger one. It is designed to determine the internal macroporosity of a 260-600 m diameter Near Earth Asteroid (NEA) from a few kilometers distance. The main goal will be to achieve a global penetration with a low-frequency signal as well as to analyze the scattering strength for various different penetration depths and measurement positions. Moreover, the measurements will be inverted through a computed radar tomography (CRT) approach. The scientific data provided by DISCUS would bring more knowledge of the internal configuration of rubble pile asteroids and their collisional evolution in the Solar System. It would also advance the design of future asteroid deflection concepts. We aim at a single-unit (1U) radar design equipped with a half-wavelength dipole antenna. The radar will utilize a stepped-frequency modulation technique the baseline of which was developed for ESA's technology projects GINGER and PIRA. The radar measurements will be used for CRT and shape reconstruction. The CubeSat will also be equipped with an optical camera system and laser altimeter to sup- port navigation and shape reconstruction. We provide the details of the measurement methods to be applied along with the requirements derived of the known characteristics of rubble pile asteroids.
△ Less
Submitted 4 May, 2018;
originally announced May 2018.
-
Far-Field Inversion for the Deep Interior Scanning CubeSat
Authors:
Mika Takala,
Patrick Bambach,
Jakob Deller,
Esa Vilenus,
Manfred Wittig,
Harald Lentz,
Hans Martin Braun,
Mikko Kaasalainen,
Sampsa Pursiainen
Abstract:
This study aims at advancing mathematical and computational techniques for reconstructing the interior structure of a near earth asteroid (NEA) via Computed Radar Tomography (CRT). We introduce a far-field model for full-wave CRT and validate it numerically for sparse and limited-angle data and an orbiting distance of about 5 km. As a potential future application of the proposed method, we conside…
▽ More
This study aims at advancing mathematical and computational techniques for reconstructing the interior structure of a near earth asteroid (NEA) via Computed Radar Tomography (CRT). We introduce a far-field model for full-wave CRT and validate it numerically for sparse and limited-angle data and an orbiting distance of about 5 km. As a potential future application of the proposed method, we consider the Deep Interior Scanning CUbeSat (DISCUS) concept in which two small spacecraft carrying a bistatic radar localize internal macropores inside a rubble pile asteroid.
△ Less
Submitted 29 March, 2018; v1 submitted 13 September, 2017;
originally announced September 2017.
-
Relative luminosity measurement of the LHC with the ATLAS forward calorimeter
Authors:
A. Afonin,
A. V. Akimov,
T. Barillari,
V. Bezzubov,
M. Blagov,
H. M. Braun,
D. Bruncko,
S. V. Chekulaev,
A. Cheplakov,
R. Degele,
S. P. Denisov,
V. Drobin,
P. Eckstein,
V. Ershov,
V. N. Evdokimov,
J. Ferencei,
V. Fimushkin,
A. Fischer,
H. Futterschneider,
V. Garkusha,
A. Glatte,
C. Handel,
J. Huber,
N. Javadov,
M. Kazarinov
, et al. (54 additional authors not shown)
Abstract:
In this paper it is shown that a measurement of the relative luminosity changes at the LHC may be obtained by analysing the currents drawn from the high voltage power supplies of the electromagnetic section of the forward calorimeter of the ATLAS detector. The method was verified with a reproduction of a small section of the ATLAS forward calorimeter using proton beams of known beam energies and v…
▽ More
In this paper it is shown that a measurement of the relative luminosity changes at the LHC may be obtained by analysing the currents drawn from the high voltage power supplies of the electromagnetic section of the forward calorimeter of the ATLAS detector. The method was verified with a reproduction of a small section of the ATLAS forward calorimeter using proton beams of known beam energies and variable intensities at the U-70 accelerator at IHEP in Protvino, Russia. The experimental setup and the data taking during a test beam run in April 2008 are described in detail. A comparison of the measured high voltage currents with reference measurements from beam intensity monitors shows a linear dependence on the beam intensity. The non-linearities are measured to be less than 0.5 % combining statistical and systematic uncertainties.
△ Less
Submitted 11 May, 2010;
originally announced May 2010.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.
-
Hadronic Calibration of the ATLAS Liquid Argon End-Cap Calorimeter in the Pseudorapidity Region 1.6 < |eta| < 1.8 in Beam Tests
Authors:
C. Cojocaru,
J. Pinfold,
J. Soukup,
M. Vincter,
V. Datskov,
A. Fedorov,
S. Golubykh,
N. Javadov,
V. Kalinnikov,
S. Kakurin,
M. Kazarinov,
V. Kukhtin,
E. Ladygin,
A. Lazarev,
A. Neganov,
I. Pisarev,
N. Rousakovitch,
E. Serochkin,
S. Shilov,
A. Shalyugin,
Yu. Usov,
D. Bruncko,
R. Chytracek,
E. Kladiva,
P. Strizenec
, et al. (91 additional authors not shown)
Abstract:
A full azimuthal phi-wedge of the ATLAS liquid argon end-cap calorimeter has been exposed to beams of electrons, muons and pions in the energy range 6 GeV <= E <= 200 GeV at the CERN SPS. The angular region studied corresponds to the ATLAS impact position around the pseudorapidity interval 1.6 < |eta| < 1.8. The beam test set-up is described. A detailed study of the performance is given as well…
▽ More
A full azimuthal phi-wedge of the ATLAS liquid argon end-cap calorimeter has been exposed to beams of electrons, muons and pions in the energy range 6 GeV <= E <= 200 GeV at the CERN SPS. The angular region studied corresponds to the ATLAS impact position around the pseudorapidity interval 1.6 < |eta| < 1.8. The beam test set-up is described. A detailed study of the performance is given as well as the related intercalibration constants obtained. Following the ATLAS hadronic calibration proposal, a first study of the hadron calibration using a weighting ansatz is presented. The results are compared to predictions from Monte Carlo simulations, based on GEANT 3 and GEANT 4 models.
△ Less
Submitted 2 July, 2004;
originally announced July 2004.