-
Resource allocation exploiting reflective surfaces to minimize the outage probability in VLC
Authors:
Borja Genoves Guzman,
Maximo Morales Cespedes,
Victor P. Gil Jimenez,
Ana Garcia Armada,
Maite Brandt-Pearce
Abstract:
Visible light communication (VLC) is a technology that complements radio frequency (RF) to fulfill the ever-increasing demand for wireless data traffic. The ubiquity of light-emitting diodes (LEDs), exploited as transmitters, increases the VLC market penetration and positions it as one of the most promising technologies to alleviate the spectrum scarcity of RF. However, VLC deployment is hindered…
▽ More
Visible light communication (VLC) is a technology that complements radio frequency (RF) to fulfill the ever-increasing demand for wireless data traffic. The ubiquity of light-emitting diodes (LEDs), exploited as transmitters, increases the VLC market penetration and positions it as one of the most promising technologies to alleviate the spectrum scarcity of RF. However, VLC deployment is hindered by blockage causing connectivity outages in the presence of obstacles. Recently, optical reconfigurable intelligent surfaces (ORISs) have been considered to mitigate this problem. While prior works exploit ORISs for data or secrecy rate maximization, this paper studies the optimal placement of mirrors and ORISs, and the LED power allocation, for jointly minimizing the outage probability while kee** the lighting standards. We describe an optimal outage minimization framework and present solvable heuristics. We provide extensive numerical results and show that the use of ORISs may reduce the outage probability by up to 67% with respect to a no-mirror scenario and provide a gain of hundreds of kbit/J in optical energy efficiency with respect to the presented benchmark.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
Optical Channel Impulse Response-Based Localization Using An Artificial Neural Network
Authors:
Hamid Hosseinianfar,
Hami Rabbani,
Maite Brandt-Pearce
Abstract:
Visible light positioning has the potential to yield sub-centimeter accuracy in indoor environments, yet conventional received signal strength (RSS)-based localization algorithms cannot achieve this because their performance degrades from optical multipath reflection. However, this part of the optical received signal is deterministic due to the often static and predictable nature of the optical wi…
▽ More
Visible light positioning has the potential to yield sub-centimeter accuracy in indoor environments, yet conventional received signal strength (RSS)-based localization algorithms cannot achieve this because their performance degrades from optical multipath reflection. However, this part of the optical received signal is deterministic due to the often static and predictable nature of the optical wireless channel. In this paper, the performance of optical channel impulse response (OCIR)-based localization is studied using an artificial neural network (ANN) to map embedded features of the OCIR to the user equipment's location. Numerical results show that OCIR-based localization outperforms conventional RSS techniques by two orders of magnitude using only two photodetectors as anchor points. The ANN technique can take advantage of multipath features in a wide range of scenarios, from using only the DC value to relying on high-resolution time sampling that can result in sub-centimeter accuracy.
△ Less
Submitted 4 November, 2022; v1 submitted 1 November, 2022;
originally announced November 2022.
-
Cooperative Object Detection and Parameter Estimation Using Visible Light Communications
Authors:
Hamid Hosseinianfar,
Maite Brandt-Pearce
Abstract:
Visible light communication (VLC) systems are promising candidates for future indoor access and peer-to-peer networks. The performance of these systems, however, is vulnerable to the line of sight (LOS) link blockage due to objects inside the room. In this paper, we develop a probabilistic object detection method that takes advantage of the blockage status of the LOS links between the user devices…
▽ More
Visible light communication (VLC) systems are promising candidates for future indoor access and peer-to-peer networks. The performance of these systems, however, is vulnerable to the line of sight (LOS) link blockage due to objects inside the room. In this paper, we develop a probabilistic object detection method that takes advantage of the blockage status of the LOS links between the user devices and transceivers on the ceiling to locate those objects. The target objects are modeled as cylinders with random radii. The location and size of an object can be estimated by using a quadratic programming approach. Simulation results show that the root-mean-squared error can be less than $1$ cm and $8$ cm for estimating the center and the radius of the object, respectively.
△ Less
Submitted 17 March, 2020;
originally announced March 2020.
-
Comparison of DCO-OFDM and M-PAM for LED-Based Communication Systems
Authors:
Jie Lian,
Mohammad Noshad,
Maite Brandt-Pearce
Abstract:
Light-emitting diode (LED)-based communications, such as visible light communications (VLC) and infrared (IR) communications, are candidate techniques to provide short-range and high-speed data transmission. In this paper, M-ary pulse amplitude modulation (M-PAM), used as a high bandwidth efficiency scheme, is compared with an optimized DC-biased optical orthogonal frequency division multiplexing…
▽ More
Light-emitting diode (LED)-based communications, such as visible light communications (VLC) and infrared (IR) communications, are candidate techniques to provide short-range and high-speed data transmission. In this paper, M-ary pulse amplitude modulation (M-PAM), used as a high bandwidth efficiency scheme, is compared with an optimized DC-biased optical orthogonal frequency division multiplexing (DCO-OFDM) scheme. Considering the bandwidth limit and constrained peak transmitted power characteristics of LEDs, a bit loading algorithm with an optimized modulation index is used for the DCO-OFDM. To reduce the inter-symbol interference caused by LEDs, a waveform design algorithm with a minimum mean squared error (MMSE) equalizer is applied to the M-PAM system. From numerical results, M-PAM with the optimized signal processing can provide a substantially higher data rate than the optimally designed DCO-OFDM for the same performance.
△ Less
Submitted 17 June, 2018;
originally announced June 2018.
-
Analysis of Indoor Uplink Optical Communication Positioning System Exploiting Multipath Reflections
Authors:
Hamid Hosseinianfar,
Maite Brandt-Pearce
Abstract:
In this paper, we introduce an uplink optical wireless positioning system for indoor applications. This technique uses fingerprints based on the indoor optical wireless channel impulse response for localization. Exploiting the line of sight peak power (LOS), the second power peak (SPP) of the impulse response, and the delay between the LOS and SPP, we present a proof of concept design and theoreti…
▽ More
In this paper, we introduce an uplink optical wireless positioning system for indoor applications. This technique uses fingerprints based on the indoor optical wireless channel impulse response for localization. Exploiting the line of sight peak power (LOS), the second power peak (SPP) of the impulse response, and the delay between the LOS and SPP, we present a proof of concept design and theoretical analysis for localization employing a single fixed reference point, i.e., a photodetector (PD) on the ceiling. Adding more PDs leads to more accurate transmitter position estimation. As a benchmark, we present analytical expressions of the Cramer-Rao lower bound (CRLB) for different numbers of PDs and features. We further present closed form analytical approximations for the chosen features of the channel impulse response. Simulation results show a root mean square (RMS) positioning accuracy of 25\,cm and 5\,cm for one and four PDs, respectively, for a typical indoor room at high SNR. Numerical results verify that the derived analytic approximations closely match the simulations.
△ Less
Submitted 25 April, 2018;
originally announced April 2018.
-
Positioning for Visible Light Communication System Exploiting Multipath Reflections
Authors:
Hamid Hosseinianfar,
Mohammad Noshad,
Maite Brandt-Pearce
Abstract:
In this paper, we introduce a new uplink visible light indoor positioning system that estimates the position of the users in the network-side of a visible light communications (VLC) system. This technique takes advantage of the diffuse components of the uplink channel impulse response for positioning, which has been considered as a destructive noise in existing visible light communication position…
▽ More
In this paper, we introduce a new uplink visible light indoor positioning system that estimates the position of the users in the network-side of a visible light communications (VLC) system. This technique takes advantage of the diffuse components of the uplink channel impulse response for positioning, which has been considered as a destructive noise in existing visible light communication positioning literature. Exploiting the line of sight (LOS) component, the most significant diffusive component of the channel (the second power peak (SPP)), and the delay time between LOS and SPP, we present a proof of concept analysis for positioning using fixed reference points, i.e. uplink photodetectors (PDs). Simulation results show the root mean square (RMS) positioning accuracy of 25 cm and 5 cm for one and 4 PDs scenarios, respectively.
△ Less
Submitted 14 June, 2017;
originally announced July 2017.
-
On the Performance of Millimeter Wave-based RF-FSO Multi-hop and Mesh Networks
Authors:
Behrooz Makki,
Tommy Svensson,
Maite Brandt-Pearce,
Mohamed-Slim Alouini
Abstract:
This paper studies the performance of multi-hop and mesh networks composed of millimeter wave (MMW)-based radio frequency (RF) and free-space optical (FSO) links. The results are obtained in cases with and without hybrid automatic repeat request (HARQ). Taking the MMW characteristics of the RF links into account, we derive closed-form expressions for the networks' outage probability and ergodic ac…
▽ More
This paper studies the performance of multi-hop and mesh networks composed of millimeter wave (MMW)-based radio frequency (RF) and free-space optical (FSO) links. The results are obtained in cases with and without hybrid automatic repeat request (HARQ). Taking the MMW characteristics of the RF links into account, we derive closed-form expressions for the networks' outage probability and ergodic achievable rates. We also evaluate the effect of various parameters such as power amplifiers efficiency, number of antennas as well as different coherence times of the RF and the FSO links on the system performance. Finally, we determine the minimum number of the transmit antennas in the RF link such that the same rate is supported in the RF- and the FSO-based hops. The results show the efficiency of the RF-FSO setups in different conditions. Moreover, HARQ can effectively improve the outage probability/energy efficiency, and compensate for the effect of hardware impairments in RF-FSO networks. For common parameter settings of the RF-FSO dual-hop networks, outage probability of 10^{-4} and code rate of 3 nats-per-channel-use, the implementation of HARQ with a maximum of 2 and 3 retransmissions reduces the required power, compared to cases with open-loop communication, by 13 and 17 dB, respectively.
△ Less
Submitted 27 March, 2017;
originally announced March 2017.
-
Performance analysis of RF-FSO multi-hop networks
Authors:
Behrooz Makki,
Tommy Svensson,
Maite Brandt-Pearce,
Mohamed-Slim Alouini
Abstract:
We study the performance of multi-hop networks composed of millimeter wave (MMW)-based radio frequency (RF) and free-space optical (FSO) links. The results are obtained in the cases with and without hybrid automatic repeat request (HARQ). Taking the MMW characteristics of the RF links into account, we derive closed-form expressions for the network outage probability. We also evaluate the effect of…
▽ More
We study the performance of multi-hop networks composed of millimeter wave (MMW)-based radio frequency (RF) and free-space optical (FSO) links. The results are obtained in the cases with and without hybrid automatic repeat request (HARQ). Taking the MMW characteristics of the RF links into account, we derive closed-form expressions for the network outage probability. We also evaluate the effect of various parameters such as power amplifiers efficiency, number of antennas as well as different coherence times of the RF and the FSO links on the system performance. Finally, we present map**s between the performance of RF-FSO multi-hop networks and the ones using only the RF- or the FSO-based communication, in the sense that with appropriate parameter settings the same outage probability is achieved in these setups. The results show the efficiency of the RF-FSO setups in different conditions. Moreover, the HARQ can effectively improve the outage probability/energy efficiency, and compensate the effect of hardware impairments in RF-FSO networks. For common parameter settings of the RF-FSO dual-hop networks, outage probability 10^{-4} and code rate 3 nats-per-channel-use, the implementation of HARQ with a maximum of 2 and 3 retransmissions reduces the required power, compared to the cases with no HARQ, by 13 and 17 dB, respectively.
△ Less
Submitted 21 March, 2017;
originally announced March 2017.
-
Impact of Wavelength and Modulation Conversion on Transluscent Elastic Optical Networks Using MILP
Authors:
Xu Wang,
Maite Brandt-Pearce,
Suresh Subramaniam
Abstract:
Compared to legacy wavelength division multiplexing networks, elastic optical networks (EON) have added flexibility to network deployment and management. EONs can include previously available technology, such as signal regeneration and wavelength conversion, as well as new features such as finer-granularity spectrum assignment and modulation conversion. Yet each added feature adds to the cost of t…
▽ More
Compared to legacy wavelength division multiplexing networks, elastic optical networks (EON) have added flexibility to network deployment and management. EONs can include previously available technology, such as signal regeneration and wavelength conversion, as well as new features such as finer-granularity spectrum assignment and modulation conversion. Yet each added feature adds to the cost of the network. In order to quantify the potential benefit of each technology, we present a link-based mixed-integer linear programming (MILP) formulation to solve the optimal resource allocation problem. We then propose a recursive model in order to either augment existing network deployments or speed up the resource allocation computation time for larger networks with higher traffic demand requirements than can be solved using an MILP. We show through simulation that systems equipped with signal regenerators or wavelength converters require a notably smaller total bandwidth, depending on the topology of the network. We also show that the suboptimal recursive solution speeds up the calculation and makes the running-time more predictable, compared to the optimal MILP.
△ Less
Submitted 27 December, 2014;
originally announced December 2014.
-
Hadamard Coded Modulation for Visible Light Communications
Authors:
Mohammad Noshad,
Maite Brandt-Pearce
Abstract:
Visible light communication (VLC) systems using the indoor lighting system to also provide downlink communications require high average optical powers in order to satisfy the illumination needs. This can cause high amplitude signals common in higher-order modulation schemes to be clipped by the peak power constraint of the light emitting diode (LED) and lead to high signal distortion. In this pape…
▽ More
Visible light communication (VLC) systems using the indoor lighting system to also provide downlink communications require high average optical powers in order to satisfy the illumination needs. This can cause high amplitude signals common in higher-order modulation schemes to be clipped by the peak power constraint of the light emitting diode (LED) and lead to high signal distortion. In this paper we introduce Hadamard coded modulation (HCM) to achieve low error probabilities in LED-based VLC systems needing high average optical powers. This technique uses a fast Walsh-Hadamard transform (FWHT) to modulate the data as an alternative modulation technique to orthogonal frequency division multiplexing (OFDM). HCM achieves a better performance for high illumination levels because of its small peak to average power ratio (PAPR). The power efficiency of HCM can be improved by reducing the DC part of the transmitted signals without losing any information. The resulting so-called DC-reduced HCM (DCR-HCM) is well suited to environments requiring dimmer lighting as it transmits signals with lower peak amplitudes compared to HCM, which are thus subject to less nonlinear distortion. Interleaving can be applied to HCM to make the resulting signals more resistant against inter-symbol interference (ISI) in dispersive VLC links.
△ Less
Submitted 17 June, 2015; v1 submitted 11 June, 2014;
originally announced June 2014.
-
Hadamard Coded Modulation: An Alternative to OFDM for Optical Wireless Communications
Authors:
Mohammad Noshad,
Maite Brandt-Pearce
Abstract:
Orthogonal frequency division multiplexing (OFDM) is a modulation technique susceptible to source, channel and amplifier nonlinearities because of its high peak-to-average ratio (PAPR). The distortion gets worse by increasing the average power of the OFDM signals since larger portion of the signals are affected by nonlinearity. In this paper we introduce Hadamard coded modulation (HCM) that uses t…
▽ More
Orthogonal frequency division multiplexing (OFDM) is a modulation technique susceptible to source, channel and amplifier nonlinearities because of its high peak-to-average ratio (PAPR). The distortion gets worse by increasing the average power of the OFDM signals since larger portion of the signals are affected by nonlinearity. In this paper we introduce Hadamard coded modulation (HCM) that uses the fast Walsh-Hadamard transform (FWHT) to modulate data as an alternative technique to OFDM in direct-detection wireless optical systems. This technique is shown to have a better performance for high average optical power scenarios because of its small PAPR, and can be used instead of OFDM in two scenarios: 1) in optical systems that require high average optical powers such as visible light communications (VLC), and 2) in optical wireless systems unconstrained by average power, for which HCM achieves lower bit error rate (BER) compared to OFDM. The power efficiency of HCM can be improved by removing a part of the signal's DC bias without losing any information. In this way, the amplitude of the transmitted signal is decreased and the signals become less susceptible to nonlinearity. Interleaving can be applied on HCM to make the resulting signals resistent against inter-symbol interference (ISI) effects in dispersive channels by uniformly distributing the interference over all symbols.
△ Less
Submitted 3 April, 2014;
originally announced April 2014.
-
Application of Expurgated PPM to Indoor Visible Light Communications - Part II: Access Networks
Authors:
Mohammad Noshad,
Maite Brandt-Pearce
Abstract:
Providing network access for multiple users in a visible light communication (VLC) system that utilizes white light emitting diodes (LED) as sources requires new networking techniques adapted to the lighting features. In this paper we introduce two multiple access techniques using expurgated PPM (EPPM) that can be implemented using LEDs and support lighting features such as dimming. Multilevel sym…
▽ More
Providing network access for multiple users in a visible light communication (VLC) system that utilizes white light emitting diodes (LED) as sources requires new networking techniques adapted to the lighting features. In this paper we introduce two multiple access techniques using expurgated PPM (EPPM) that can be implemented using LEDs and support lighting features such as dimming. Multilevel symbols are used to provide M-ary signaling for multiple users using multilevel EPPM (MEPPM). Using these multiple-access schemes we are able to control the optical peak to average power ratio (PAPR) in the system, and hereby control the dimming level. In the first technique, the M-ary data of each user is first encoded using an optical orthogonal code (OOC) assigned to the user, and the result is fed into a EPPM encoder to generate a multilevel signal. The second multiple access method uses sub-sets of the EPPM constellation to apply MEPPM to the data of each user. While the first approach has a larger Hamming distance between the symbols of each user, the latter can provide higher bit-rates for users in VLC systems using bandwidth-limited LEDs.
△ Less
Submitted 3 September, 2013;
originally announced September 2013.
-
Application of Expurgated PPM to Indoor Visible Light Communications - Part I: Single-User Systems
Authors:
Mohammad Noshad,
Maite Brandt-Pearce
Abstract:
Visible light communications (VLC) in indoor environments suffer from the limited bandwidth of LEDs as well as from the inter-symbol interference (ISI) imposed by multipath. In this work, transmission schemes to improve the performance of indoor optical wireless communication (OWC) systems are introduced. Expurgated pulse-position modulation (EPPM) is proposed for this application since it can pro…
▽ More
Visible light communications (VLC) in indoor environments suffer from the limited bandwidth of LEDs as well as from the inter-symbol interference (ISI) imposed by multipath. In this work, transmission schemes to improve the performance of indoor optical wireless communication (OWC) systems are introduced. Expurgated pulse-position modulation (EPPM) is proposed for this application since it can provide a wide range of peak to average power ratios (PAPR) needed for dimming of the indoor illumination. A correlation decoder used at the receiver is shown to be optimal for indoor VLC systems, which are shot noise and background-light limited. Interleaving applied on EPPM in order to decrease the ISI effect in dispersive VLC channels can significantly decrease the error probability. The proposed interleaving technique makes EPPM a better modulation option compared to PPM for VLC systems or any other dispersive OWC system. An overlapped EPPM pulse technique is proposed to increase the transmission rate when bandwidth-limited white LEDs are used as sources.
△ Less
Submitted 3 September, 2013;
originally announced September 2013.
-
Can Visible Light Communications Provide Gb/s Service?
Authors:
Mohammad Noshad,
Maite Brandt-Pearce
Abstract:
Visible light communications (VLC) that use the infrastructure of the indoor illumination system have been envisioned as a compact, safe, and green alternative to WiFi for the downlink of an indoor wireless mobile communication system. Although the optical spectrum is typically well-suited to high throughput applications, combining communications with indoor lighting in a commercially viable syste…
▽ More
Visible light communications (VLC) that use the infrastructure of the indoor illumination system have been envisioned as a compact, safe, and green alternative to WiFi for the downlink of an indoor wireless mobile communication system. Although the optical spectrum is typically well-suited to high throughput applications, combining communications with indoor lighting in a commercially viable system imposes severe limitations both in bandwidth and received power. Clever techniques are needed to achieve Gb/s transmission, and to do it in a cost effective manner so as to successfully compete with other high-capacity alternatives for indoor access, such as millimeter-wave radio-frequency (RF). This article presents modulation schemes that have the potential to overcome the many challenges faced by VLC in providing multi Gb/s indoor wireless connectivity.
△ Less
Submitted 14 August, 2013;
originally announced August 2013.
-
High-Speed Visible Light Indoor Networks Based on Optical Orthogonal Codes and Combinatorial Designs
Authors:
Mohammad Noshad,
Maite Brandt-Pearce
Abstract:
Interconnecting devices in an indoor environment using the illumination system and white light emitting diodes (LED) requires adaptive networking techniques that can provide network access for multiple users. Two techniques based on multilevel signaling and optical orthogonal codes (OOC) are explored in this paper in order to provide simultaneous multiple access in an indoor multiuser network. Bal…
▽ More
Interconnecting devices in an indoor environment using the illumination system and white light emitting diodes (LED) requires adaptive networking techniques that can provide network access for multiple users. Two techniques based on multilevel signaling and optical orthogonal codes (OOC) are explored in this paper in order to provide simultaneous multiple access in an indoor multiuser network. Balanced incomplete block designs (BIBD) are used to construct multilevel symbols for M-ary signaling. Using these multilevel symbols we are able to control the optical peak to average power ratio (PAPR) in the system, and hereby control the dimming level. In the first technique, the M-ary data of each user is first encoded using the OOC codeword that is assigned to that user, and then it is fed into a BIBD encoder to generate a multilevel signal. The second multiple access method uses sub-sets of a BIBD code to apply multilevel expurgated pulse-position modulation (MEPPM) to the data of each user. While the first approach has a larger Hamming distance between the symbols of each user, the latter can provide higher bit-rates for users in VLC systems with bandwidth-limited LEDs.
△ Less
Submitted 3 August, 2013;
originally announced August 2013.
-
NLOS UV Channel Modeling Using Numerical Integration and an Approximate Closed-Form Path Loss Model
Authors:
Ankit Gupta,
Mohammad Noshad,
Maïté Brandt-Pearce
Abstract:
In this paper we propose a simulation method using numerical integration, and develop a closed-form link loss model for physical layer channel characterization for non-line of sight (NLOS) ultraviolet (UV) communication systems. The impulse response of the channel is calculated by assuming both uniform and Gaussian profiles for transmitted beams and different geometries. The results are compared w…
▽ More
In this paper we propose a simulation method using numerical integration, and develop a closed-form link loss model for physical layer channel characterization for non-line of sight (NLOS) ultraviolet (UV) communication systems. The impulse response of the channel is calculated by assuming both uniform and Gaussian profiles for transmitted beams and different geometries. The results are compared with previously published results. The accuracy of the integration approach is compared to the Monte Carlo simulation. Then the path loss using the simulation method and the suggested closed-form expression are presented for different link geometries. The accuracies are evaluated and compared to the results obtained using other methods.
△ Less
Submitted 9 August, 2012;
originally announced August 2012.
-
Expurgated PPM Using Symmetric Balanced Incomplete Block Designs
Authors:
Mohammad Noshad,
Maite Brandt-Pearce
Abstract:
In this letter, we propose a new pulse position modulation (PPM) scheme, called expurgated PPM (EPPM), for application in peak power limited communication systems, such as impulse radio (IR) ultra wide band (UWB) systems and free space optical (FSO) communications. Using the proposed scheme, the constellation size and the bit-rate can be increased significantly in these systems. The symbols are ob…
▽ More
In this letter, we propose a new pulse position modulation (PPM) scheme, called expurgated PPM (EPPM), for application in peak power limited communication systems, such as impulse radio (IR) ultra wide band (UWB) systems and free space optical (FSO) communications. Using the proposed scheme, the constellation size and the bit-rate can be increased significantly in these systems. The symbols are obtained using symmetric balanced incomplete block designs (BIBD), forming a set of pair-wise equidistance symbols. The performance of Q-ary EPPM is better than any Q-ary pulse position-based modulation scheme with the same symbol length. Since the code is cyclic, the receiver for EPPM is simpler compared to multipulse PPM (MPPM).
△ Less
Submitted 23 March, 2012;
originally announced March 2012.