-
Efficient Model Reduction and Prediction of Superharmonic Resonances in Frictional and Hysteretic Systems
Authors:
Justin H. Porter,
Matthew R. W. Brake
Abstract:
Modern engineering structures exhibit nonlinear vibration behavior as designs are pushed to reduce weight and energy consumption. Of specific interest here, joints in assembled structures introduce friction, hysteresis, and unilateral contact resulting in nonlinear vibration effects. In many cases, it is impractical to remove jointed connections necessitating, the understanding of these behaviors.…
▽ More
Modern engineering structures exhibit nonlinear vibration behavior as designs are pushed to reduce weight and energy consumption. Of specific interest here, joints in assembled structures introduce friction, hysteresis, and unilateral contact resulting in nonlinear vibration effects. In many cases, it is impractical to remove jointed connections necessitating, the understanding of these behaviors. This work focuses on superharmonic and internal resonances in hysteretic and jointed systems. Superharmonic resonances occur when a nonlinear system is forced at an integer fraction of a natural frequency resulting in a large (locally maximal) response at an integer multiple of the forcing frequency. When a second vibration mode simultaneously responds in resonance at the forcing frequency, the combined phenomena is termed an internal resonance. First, variable phase resonance nonlinear modes (VPRNM) is extended to track superharmonic resonances in multiple degree of freedom systems exhibiting hysteresis. Then a novel reduced order model based on VPRNM (VPRNM ROM) is proposed to reconstruct frequency response curves faster than utilizing the harmonic balance method (HBM). The VPRNM ROM is demonstrated for a 3 degree of freedom system with a 3:1 internal resonance and for the jointed Half Brake-Reuss Beam (HBRB), which exhibits a 7:1 internal resonance. For the HBRB, new experimental results are used to validate the modeling approaches, and a previously developed physics-based friction model is further validated, achieving frequency predictions within 3%. For the considered cases, VPRNM ROM construction is up to 4 times faster than HBM, and the evaluation of the VPRNM ROM is up to 780,000 times faster than HBM. The modeling shows that both tangential slip** and normal direction clap** of the joint play important roles in exciting the superharmonic resonances in the HBRB.
△ Less
Submitted 24 May, 2024;
originally announced May 2024.
-
Tracking Superharmonic Resonances for Nonlinear Vibration of Conservative and Hysteretic Single Degree of Freedom Systems
Authors:
Justin H. Porter,
Matthew R. W. Brake
Abstract:
Many modern engineering structures exhibit nonlinear vibration. Characterizing such vibrations efficiently is critical to optimizing designs for reliability and performance. For linear systems, steady-state vibration occurs only at the forcing frequencies. However, nonlinearities (e.g., contact, friction, large deformation, etc.) can result in nonlinear vibration behavior including superharmonics…
▽ More
Many modern engineering structures exhibit nonlinear vibration. Characterizing such vibrations efficiently is critical to optimizing designs for reliability and performance. For linear systems, steady-state vibration occurs only at the forcing frequencies. However, nonlinearities (e.g., contact, friction, large deformation, etc.) can result in nonlinear vibration behavior including superharmonics - responses at integer multiples of the forcing frequency. When the forcing frequency is near an integer fraction of the natural frequency, superharmonic resonance occurs, and the magnitude of the superharmonics can exceed that of the fundamental harmonic that is externally forced. Characterizing such superharmonic resonances is critical to improving engineering designs. The present work extends the concept of phase resonance nonlinear modes (PRNM) to be applicable to general nonlinearities, and is demonstrated for eight different nonlinear forces. The considered forces include stiffening, softening, contact, dam**, and frictional nonlinearities that have not been previously considered with PRNM. The proposed variable phase resonance nonlinear modes (VPRNM) method can accurately track superharmonic resonances for hysteretic nonlinearities that exhibit amplitude dependent phase resonance conditions that cannot be captured by PRNM. The proposed method allows for characterization of superharmonic resonances without constructing a full frequency response curve at every force level with the harmonic balance method. Thus, the present method allows for analysis of potential failures due to large amplitudes near the superharmonic resonance with reduced computational cost. The consideration of single degree of freedom systems in the present paper provides insights into superharmonic resonances and a basis for understanding internal resonances for multiple degree of freedom systems.
△ Less
Submitted 30 April, 2024; v1 submitted 16 January, 2024;
originally announced January 2024.
-
The payload of the Lunar Gravitational-wave Antenna
Authors:
Joris van Heijningen,
Marcel ter Brake,
Oliver Gerberding,
Shreevathsa Chalathadka Subrahmanya,
Jan Harms,
Xing Bian,
Alberto Gatti,
Morgane Zeoli,
Alessandro Bertolini,
Christophe Collette,
Andrea Perali,
Nicola Pinto,
Meenakshi Sharma,
Filip Tavernier,
Javad Rezvani
Abstract:
The toolbox to study the Universe grew on 14 September 2015 when the LIGO-Virgo collaboration heard a signal from two colliding black holes between 30-250 Hz. Since then, many more gravitational waves have been detected as detectors increased sensitivity. However, the current detector design sensitivity curves still have a lower cut-off of 10 Hz. To detect even lower-frequency gravitational-wave s…
▽ More
The toolbox to study the Universe grew on 14 September 2015 when the LIGO-Virgo collaboration heard a signal from two colliding black holes between 30-250 Hz. Since then, many more gravitational waves have been detected as detectors increased sensitivity. However, the current detector design sensitivity curves still have a lower cut-off of 10 Hz. To detect even lower-frequency gravitational-wave signals, the Lunar Gravitational-wave Antenna will use an array of seismic stations in a permanently shadowed crater. It aims to detect the differential between the elastic response of the Moon and the suspended inertial sensor proof mass motion induced by gravitational waves. A cryogenic superconducting inertial sensor is under development that aims for fm/rtHz sensitivity or better down to 1 Hz and is planned to be deployed in seismic stations. Here, we describe the current state of research towards the inertial sensor, its applications and additional auxiliary technologies in the payload of the lunar gravitational-wave detection mission.
△ Less
Submitted 1 February, 2023; v1 submitted 31 January, 2023;
originally announced January 2023.
-
ETpathfinder: a cryogenic testbed for interferometric gravitational-wave detectors
Authors:
A. Utina,
A. Amato,
J. Arends,
C. Arina,
M. de Baar,
M. Baars,
P. Baer,
N. van Bakel,
W. Beaumont,
A. Bertolini,
M. van Beuzekom,
S. Biersteker,
A. Binetti,
H. J. M. ter Brake,
G. Bruno,
J. Bryant,
H. J. Bulten,
L. Busch,
P. Cebeci,
C. Collette,
S. Cooper,
R. Cornelissen,
P. Cuijpers,
M. van Dael,
S. Danilishin
, et al. (90 additional authors not shown)
Abstract:
The third-generation of gravitational wave observatories, such as the Einstein Telescope (ET) and Cosmic Explorer (CE), aim for an improvement in sensitivity of at least a factor of ten over a wide frequency range compared to the current advanced detectors. In order to inform the design of the third-generation detectors and to develop and qualify their subsystems, dedicated test facilities are req…
▽ More
The third-generation of gravitational wave observatories, such as the Einstein Telescope (ET) and Cosmic Explorer (CE), aim for an improvement in sensitivity of at least a factor of ten over a wide frequency range compared to the current advanced detectors. In order to inform the design of the third-generation detectors and to develop and qualify their subsystems, dedicated test facilities are required. ETpathfinder prototype uses full interferometer configurations and aims to provide a high sensitivity facility in a similar environment as ET. Along with the interferometry at 1550 nm and silicon test masses, ETpathfinder will focus on cryogenic technologies, lasers and optics at 2090 nm and advanced quantum-noise reduction schemes. This paper analyses the underpinning noise contributions and combines them into full noise budgets of the two initially targeted configurations: 1) operating with 1550 nm laser light and at a temperature of 18 K and 2) operating at 2090 nm wavelength and a temperature of 123 K.
△ Less
Submitted 10 June, 2022;
originally announced June 2022.
-
Experimental assessment of polynomial nonlinear state-space and nonlinear-mode models for near-resonant vibrations
Authors:
Maren Scheel,
Gleb Kleyman,
Ali Tatar,
Matthew R. W. Brake,
Simon Peter,
Jean-Philippe Noël,
Matthew S. Allen,
Malte Krack
Abstract:
In the present paper, two existing nonlinear system identification methodologies are used to identify data-driven models. The first methodology focuses on identifying the system using steady-state excitations. To accomplish this, a phase-locked loop controller is implemented to acquire periodic oscillations near resonance and construct a nonlinear-mode model. This model is based on amplitude-depen…
▽ More
In the present paper, two existing nonlinear system identification methodologies are used to identify data-driven models. The first methodology focuses on identifying the system using steady-state excitations. To accomplish this, a phase-locked loop controller is implemented to acquire periodic oscillations near resonance and construct a nonlinear-mode model. This model is based on amplitude-dependent modal properties, i.e. does not require nonlinear basis functions. The second methodology exploits uncontrolled experiments with broadband random inputs to build polynomial nonlinear state-space models using advanced system identification tools. The methods are applied to two experimental test rigs, a magnetic cantilever beam and a free-free beam with a lap joint. The respective models of both methods and both specimens are then challenged to predict dynamic, near-resonant behavior observed under different sine and sine-sweep excitations. The vibration prediction of the nonlinear-mode and state-space models clearly highlight the capabilities and limitations of the models. The nonlinear-mode model, by design, yields a perfect match at resonance peaks and high accuracy in close vicinity. However, it is limited to well-spaced modes and sinusoidal excitation. The state-space model covers a wider dynamic range, including transient excitations. However, the real-life nonlinearities considered in this study can only be approximated by polynomial basis functions. Consequently, the identified state-space models are found to be highly input-dependent, in particular for sinusoidal excitations where they are found to lead to a low predictive capability.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
Mechanics of cooling liquids by forced evaporation in bubbles
Authors:
Michiel A. J. van Limbeek,
D. van Buuren,
M. R. P. van den Broek,
H. J. M. ter Brake,
S. Vanapalli
Abstract:
Injecting a non-dissolvable gas into a saturated liquid results in sub-cooling of the liquid due to forced evaporation into the bubble. Previous studies assumed the rate of evaporation of liquid into the bubble to be independent of the degree of sub-cooling. In our study we quantify the bubble growth by direct observation using high speed imaging and prove that this hypothesis is not true. A pheno…
▽ More
Injecting a non-dissolvable gas into a saturated liquid results in sub-cooling of the liquid due to forced evaporation into the bubble. Previous studies assumed the rate of evaporation of liquid into the bubble to be independent of the degree of sub-cooling. In our study we quantify the bubble growth by direct observation using high speed imaging and prove that this hypothesis is not true. A phenomenological model of the bubble growth as a function of the degree of sub-cooling is developed and we find excellent agreement between the measurements and theory. This bubble cooling process is employed in cooling a liquid. By identification of all heat flows, we can well describe the cool down curve using bubble cooling. Bubble cooling provides an alternative cooling method for liquids without the use of complicated cooling techniques.
△ Less
Submitted 13 July, 2018;
originally announced July 2018.
-
HARPS3 for a Roboticized Isaac Newton Telescope
Authors:
Samantha J. Thompson,
Didier Queloz,
Isabelle Baraffe,
Martyn Brake,
Andrey Dolgopolov,
Martin Fisher,
Michel Fleury,
Joost Geelhoed,
Richard Hall,
Jonay I. Gonzalez Hernandez,
Rik ter Horst,
Jan Kragt,
Ramon Navarro,
Tim Naylor,
Francesco Pepe,
Nikolai Piskunov,
Rafael Rebolo,
Louis Sander,
Damien Segransan,
Eugene Seneta,
David Sing,
Ignas Snellen,
Frans Snik,
Julien Spronck,
Eric Stempels
, et al. (3 additional authors not shown)
Abstract:
We present a description of a new instrument development, HARPS3, planned to be installed on an upgraded and roboticized Isaac Newton Telescope by end-2018. HARPS3 will be a high resolution (R = 115,000) echelle spectrograph with a wavelength range from 380-690 nm. It is being built as part of the Terra Hunting Experiment - a future 10 year radial velocity measurement programme to discover Earth-l…
▽ More
We present a description of a new instrument development, HARPS3, planned to be installed on an upgraded and roboticized Isaac Newton Telescope by end-2018. HARPS3 will be a high resolution (R = 115,000) echelle spectrograph with a wavelength range from 380-690 nm. It is being built as part of the Terra Hunting Experiment - a future 10 year radial velocity measurement programme to discover Earth-like exoplanets. The instrument design is based on the successful HARPS spectrograph on the 3.6m ESO telescope and HARPS-N on the TNG telescope. The main changes to the design in HARPS3 will be: a customised fibre adapter at the Cassegrain focus providing a stabilised beam feed and on-sky fibre diameter ~ 1.4 arcsec, the implementation of a new continuous flow cryostat to keep the CCD temperature very stable, detailed characterisation of the HARPS3 CCD to map the effective pixel positions and thus provide an improved accuracy wavelength solution, an optimised integrated polarimeter and the instrument integrated into a robotic operation. The robotic operation will optimise our programme which requires our target stars to be measured on a nightly basis. We present an overview of the entire project, including a description of our anticipated robotic operation.
△ Less
Submitted 16 August, 2016;
originally announced August 2016.
