-
First high peak and average power single-pass THz FEL based on high brightness photoinjector
Authors:
M. Krasilnikov,
Z. Aboulbanine,
G. Adhikari,
N. Aftab,
A. Asoyan,
P. Boonpornprasert,
H. Davtyan,
G. Georgiev,
J. Good,
A. Grebinyk,
M. Gross,
A. Hoffmann,
E. Kongmon,
X. -K. Li,
A. Lueangaramwong,
D. Melkumyan,
S. Mohanty,
R. Niemczyk,
A. Oppelt,
H. Qian,
C. Richard,
F. Stephan,
G. Vashchenko,
T. Weilbach,
X. Zhang
, et al. (9 additional authors not shown)
Abstract:
Advanced experiments using THz pump and X-ray probe pulses at modern free-electron lasers (FELs) like the European X-ray FEL require a frequency-tunable, high-power, narrow-band THz source maintaining the repetition rate and pulse structure of the X-ray pulses. This paper reports the first results from a THz source, that is based on a single-pass high-gain THz FEL operating with a central waveleng…
▽ More
Advanced experiments using THz pump and X-ray probe pulses at modern free-electron lasers (FELs) like the European X-ray FEL require a frequency-tunable, high-power, narrow-band THz source maintaining the repetition rate and pulse structure of the X-ray pulses. This paper reports the first results from a THz source, that is based on a single-pass high-gain THz FEL operating with a central wavelength of 100 micrometers. The THz FEL prototype is currently in operation at the Photo Injector Test facility at DESY in Zeuthen (PITZ) and uses the same type of electron source as the European XFEL photo injector. A self-amplified spontaneous emission (SASE) FEL was envisioned as the main mechanism for generating the THz pulses. Although the THz FEL at PITZ is supposed to use the same mechanism as at X-ray facilities, it cannot be considered as a simple scaling of the radiation wavelength because there is a large difference in the number of electrons per radiation wavelength, which is five orders of magnitude higher for the THz case. The bunching factor arising from the electron beam current profile contributes strongly to the initial spontaneous emission starting the FEL process. Proof-of-principle experiments were done at PITZ using an LCLS-I undulator to generate the first high-power, high-repetition-rate single-pass THz FEL radiation. Electron bunches with a beam energy of ~17 MeV and a bunch charge of up to several nC are used to generate THz pulses with a pulse energy of several tens of microjoules. For example, for an electron beam with a charge of ~2.4 nC, more than 100 microjoules were generated at a central wavelength of 100 micrometers. The narrowband spectrum was also demonstrated by spectral measurements. These proof-of-principle experiments pave the way for a tunable, high-repetition-rate THz source providing pulses with energies in the millijoule range.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
The LCLS-II Photoinjector Laser Infrastructure
Authors:
Hao Zhang,
Sasha Gilevich,
Alan Miahnahri,
Shawn Alverson,
Axel Brachmann,
Joseph Duris,
Paris Franz,
Alan Fry,
Jack Hirschman,
Kirk Larsen,
Randy Lemons,
Siqi Li,
Brittany Lu,
Agostino Marinelli,
Mikael Martinez,
Justin May,
Erel Milshtein,
Krishna Murari,
Nicole Neveu,
Joseph Robinson,
John Schmerge,
Linshan Sun,
Theodore Vecchione,
Chengcheng Xu,
Feng Zhou
, et al. (1 additional authors not shown)
Abstract:
This paper presents a comprehensive technical overview of the Linac Coherent Light Source II (LCLS-II) photoinjector laser system, its first and foremost component. The LCLS-II photoinjector laser system serves as an upgrade to the original LCLS at SLAC National Accelerator Laboratory. This advanced laser system generates high-quality laser beams for LCLS-II, contributing to the instrument's unpre…
▽ More
This paper presents a comprehensive technical overview of the Linac Coherent Light Source II (LCLS-II) photoinjector laser system, its first and foremost component. The LCLS-II photoinjector laser system serves as an upgrade to the original LCLS at SLAC National Accelerator Laboratory. This advanced laser system generates high-quality laser beams for LCLS-II, contributing to the instrument's unprecedented brightness, precision, and flexibility. Our discussion extends to the various subsystems that comprise the photoinjector, including the photocathode laser, laser heater, and beam transport systems. Lastly, we draw attention to the ongoing research and development infrastructure underway to enhance the functionality and efficiency of the LCLS-II, and similar X-ray free-electron laser facilities around the world, thereby contributing to the future of laser technology and its applications.
△ Less
Submitted 17 May, 2024; v1 submitted 22 July, 2023;
originally announced July 2023.
-
N2V2 -- Fixing Noise2Void Checkerboard Artifacts with Modified Sampling Strategies and a Tweaked Network Architecture
Authors:
Eva Höck,
Tim-Oliver Buchholz,
Anselm Brachmann,
Florian Jug,
Alexander Freytag
Abstract:
In recent years, neural network based image denoising approaches have revolutionized the analysis of biomedical microscopy data. Self-supervised methods, such as Noise2Void (N2V), are applicable to virtually all noisy datasets, even without dedicated training data being available. Arguably, this facilitated the fast and widespread adoption of N2V throughout the life sciences. Unfortunately, the bl…
▽ More
In recent years, neural network based image denoising approaches have revolutionized the analysis of biomedical microscopy data. Self-supervised methods, such as Noise2Void (N2V), are applicable to virtually all noisy datasets, even without dedicated training data being available. Arguably, this facilitated the fast and widespread adoption of N2V throughout the life sciences. Unfortunately, the blind-spot training underlying N2V can lead to rather visible checkerboard artifacts, thereby reducing the quality of final predictions considerably. In this work, we present two modifications to the vanilla N2V setup that both help to reduce the unwanted artifacts considerably. Firstly, we propose a modified network architecture, i.e., using BlurPool instead of MaxPool layers throughout the used U-Net, rolling back the residual U-Net to a non-residual U-Net, and eliminating the skip connections at the uppermost U-Net level. Additionally, we propose new replacement strategies to determine the pixel intensity values that fill in the elected blind-spot pixels. We validate our modifications on a range of microscopy and natural image data. Based on added synthetic noise from multiple noise types and at varying amplitudes, we show that both proposed modifications push the current state-of-the-art for fully self-supervised image denoising.
△ Less
Submitted 21 November, 2022; v1 submitted 15 November, 2022;
originally announced November 2022.
-
Narrow bandwidth active noise control for microphonics rejection in superconducting cavities at LCLS-II
Authors:
Andrea Bellandi,
Julien Branlard,
Jorge Diaz Cruz,
Sebastian Aderhold,
Andrew Benwell,
Axel Brachmann,
Sonya Hoobler,
Alessandro Ratti,
Dan Gonnella,
Janice Nelson,
Ryan Douglas Porter,
Lisa Zacarias
Abstract:
LCLS-II is an X-Ray Free Electron Laser (XFEL) commissioned in 2022, being the first Continuous Wave (CW) hard XFEL in the world to come into operation. To accelerate the electron beam to an energy of $\SI{4}{\giga \eV}$, 280 TESLA type superconducting RF (SRF) cavities are used. A loaded quality factor ($Q_L$) of $4 \times 10^7$ is used to drive the cavities at a power level of a few kilowatts. F…
▽ More
LCLS-II is an X-Ray Free Electron Laser (XFEL) commissioned in 2022, being the first Continuous Wave (CW) hard XFEL in the world to come into operation. To accelerate the electron beam to an energy of $\SI{4}{\giga \eV}$, 280 TESLA type superconducting RF (SRF) cavities are used. A loaded quality factor ($Q_L$) of $4 \times 10^7$ is used to drive the cavities at a power level of a few kilowatts. For this $Q_L$, the RF cavity bandwidth is 32 Hz. Therefore, kee** the cavity resonance frequency within such bandwidth is imperative to avoid a significant increase in the required drive power. In superconducting accelerators, resonance frequency variations are produced by mechanical microphonic vibrations of the cavities. One source of microphonic noise is rotary machinery such as vacuum pumps or HVAC equipment. A possible method to reject these disturbances is to use Narrowband Active Noise Control (NANC) techniques. These techniques were already tested at DESY/CMTB and Cornell/CBETA. This proceeding presents the implementation of a NANC controller adapted to the LCLS-II Low Level RF (LLRF) control system. Tests showing the rejection of LCLS-II microphonic disturbances are also presented.
△ Less
Submitted 11 October, 2022; v1 submitted 28 September, 2022;
originally announced September 2022.
-
Beam Polarization at the ILC: the Physics Impact and the Accelerator Solutions
Authors:
B. Aurand,
I. Bailey,
C. Bartels,
A. Brachmann,
J. Clarke,
A. Hartin,
J. Hauptman,
C. Helebrant,
S. Hesselbach,
D. Kafer,
J. List,
W. Lorenzon,
I. Marchesini,
K. Monig,
K. C. Moffeit,
G. Moortgat-Pick,
S. Riemann,
A. Schalicke,
P. Schuler,
P. Starovoitov,
A. Ushakov,
U. Velte,
J. Wittschen,
M. Woods
Abstract:
In this contribution accelerator solutions for polarized beams and their impact on physics measurements are discussed. Focus are physics requirements for precision polarimetry near the interaction point and their realization with polarized sources. Based on the ILC baseline programme as described in the Reference Design Report (RDR), recent developments are discussed and evaluated taking into ac…
▽ More
In this contribution accelerator solutions for polarized beams and their impact on physics measurements are discussed. Focus are physics requirements for precision polarimetry near the interaction point and their realization with polarized sources. Based on the ILC baseline programme as described in the Reference Design Report (RDR), recent developments are discussed and evaluated taking into account physics runs at beam energies between 100 GeV and 250 GeV, as well as calibration runs on the Z-pole and options as the 1TeV upgrade and GigaZ.
△ Less
Submitted 17 March, 2009;
originally announced March 2009.
-
Status of the ATF extraction line laser-wire
Authors:
Nicolas Delerue,
Fred Gannaway,
David Howell,
Grahame Blair,
Gary Boorman,
Chafik Driouichi,
Stewart Boogert,
Alexander Aryshev,
Pavel Karataev,
Nobuhiro Terunuma,
Junji Urakawa,
Axel Brachmann,
Joe Frisch,
Marc Ross
Abstract:
A new laser-wire is being installed in the extraction line of the ATF at KEK. This device aims at demonstrating that laser-wires can be used to measure micrometre scale beam size.
A new laser-wire is being installed in the extraction line of the ATF at KEK. This device aims at demonstrating that laser-wires can be used to measure micrometre scale beam size.
△ Less
Submitted 18 January, 2006;
originally announced January 2006.
-
The role of polarized positrons and electrons in revealing fundamental interactions at the Linear Collider
Authors:
G. Moortgat-Pick,
T. Abe,
G. Alexander,
B. Ananthanarayan,
A. A. Babich,
V. Bharadwaj,
D. Barber,
A. Bartl,
A. Brachmann,
S. Chen,
J. Clarke,
J. E. Clendenin,
J. Dainton,
K. Desch,
M. Diehl,
B. Dobos,
T. Dorland,
H. Eberl,
J. Ellis,
K. Flöttmann,
H. Fraas,
F. Franco-Sollova,
F. Franke,
A. Freitas,
J. Goodson
, et al. (49 additional authors not shown)
Abstract:
The proposed International Linear Collider (ILC) is well-suited for discovering physics beyond the Standard Model and for precisely unraveling the structure of the underlying physics. The physics return can be maximized by the use of polarized beams. This report shows the paramount role of polarized beams and summarizes the benefits obtained from polarizing the positron beam, as well as the elec…
▽ More
The proposed International Linear Collider (ILC) is well-suited for discovering physics beyond the Standard Model and for precisely unraveling the structure of the underlying physics. The physics return can be maximized by the use of polarized beams. This report shows the paramount role of polarized beams and summarizes the benefits obtained from polarizing the positron beam, as well as the electron beam. The physics case for this option is illustrated explicitly by analyzing reference reactions in different physics scenarios. The results show that positron polarization, combined with the clean experimental environment provided by the linear collider, allows to improve strongly the potential of searches for new particles and the identification of their dynamics, which opens the road to resolve shortcomings of the Standard Model. The report also presents an overview of possible designs for polarizing both beams at the ILC, as well as for measuring their polarization.
△ Less
Submitted 1 July, 2005;
originally announced July 2005.
-
Polarized Electrons for Linear Colliders
Authors:
J. E. Clendenin,
A. Brachmann,
E. L. Garwin,
R. E. Kirby,
D. -A. Luh,
T. Maruyama,
C. Y. Prescott,
J. C. Sheppard,
J. Turner,
R. Prepost
Abstract:
Future electron-positron linear colliders require a highly polarized electron beam with a pulse structure that depends primarily on whether the acceleration utilizes warm or superconducting rf structures. The International Linear Collider (ILC) will use cold structures for the main linac. It is shown that a dc-biased polarized photoelectron source such as successfully used for the SLC can meet t…
▽ More
Future electron-positron linear colliders require a highly polarized electron beam with a pulse structure that depends primarily on whether the acceleration utilizes warm or superconducting rf structures. The International Linear Collider (ILC) will use cold structures for the main linac. It is shown that a dc-biased polarized photoelectron source such as successfully used for the SLC can meet the charge requirements for the ILC micropulse with a polarization approaching 90%.
△ Less
Submitted 17 December, 2004;
originally announced December 2004.
-
A systematic study of polarized electron emission from strained GaAs/GaAsP superlattice photocathodes
Authors:
T. Maruyama,
D. -A. Luh,
A. Brachmann,
J. E. Clendenin,
E. L. Garwin,
S. Harvey,
J. Jiang,
R. E. Kirby,
C. Y. Prescott,
R. Prepost,
A. M. Moy
Abstract:
Spin-polarized electron photoemission has been studied for GaAs/GaAs$_{1-x}$P$_x$ strained superlattice cathodes grown by gas-source molecular beam epitaxy. The superlattice structural parameters are systematically varied to optimize the photoemission characteristics. The heavy-hole and light-hole transitions are reproducibly observed in quantum efficiency spectra, enabling direct measurement of…
▽ More
Spin-polarized electron photoemission has been studied for GaAs/GaAs$_{1-x}$P$_x$ strained superlattice cathodes grown by gas-source molecular beam epitaxy. The superlattice structural parameters are systematically varied to optimize the photoemission characteristics. The heavy-hole and light-hole transitions are reproducibly observed in quantum efficiency spectra, enabling direct measurement of the band energies and the energy splitting. Electron-spin polarization as high as 86% with over 1% quantum efficiency has been observed.
△ Less
Submitted 16 December, 2004;
originally announced December 2004.
-
Atomic Hydrogen Cleaning of Polarized GaAs Photocathodes
Authors:
T. Maruyama,
D. -A. Luh,
A. Brachmann,
J. E. Clendenin,
E. L. Garwin,
S. Harvey,
R. E. Kirby,
C. Y. Prescott,
R. Prepost
Abstract:
Atomic hydrogen cleaning followed by heat cleaning at 450$^\circ$C was used to prepare negative-electron-affinity GaAs photocathodes. When hydrogen ions were eliminated, quantum efficiencies of 15% were obtained for bulk GaAs cathodes, higher than the results obtained using conventional 600$^\circ$C heat cleaning. The low-temperature cleaning technique was successfully applied to thin, strained…
▽ More
Atomic hydrogen cleaning followed by heat cleaning at 450$^\circ$C was used to prepare negative-electron-affinity GaAs photocathodes. When hydrogen ions were eliminated, quantum efficiencies of 15% were obtained for bulk GaAs cathodes, higher than the results obtained using conventional 600$^\circ$C heat cleaning. The low-temperature cleaning technique was successfully applied to thin, strained GaAs cathodes used for producing highly polarized electrons. No depolarization was observed even when the optimum cleaning time of about 30 seconds was extended by a factor of 100.
△ Less
Submitted 16 December, 2004;
originally announced December 2004.
-
Recent Progress at SLAC Extracting High Charge from Highly-Polarized Photocathodes for Future-Collider Applications
Authors:
J. E. Clendenin,
A. Brachmann,
E. L. Garwin,
S. Harvey,
J. Jiang,
R. E. Kirby,
D. -A. Luh,
T. Maruyama,
R. Prepost,
C. Y. Prescott,
J. L. Turner
Abstract:
Future colliders such as NLC and JLC will require a highly-polarized macropulse with charge that is more than an order of magnitude beyond that which could be produced for the SLC. The maximum charge from the SLC uniformly-doped GaAs photocathode was limited by the surface charge limit (SCL). The SCL effect can be overcome by using an extremely high (>1019 cm-3) surface dopant concentration. Whe…
▽ More
Future colliders such as NLC and JLC will require a highly-polarized macropulse with charge that is more than an order of magnitude beyond that which could be produced for the SLC. The maximum charge from the SLC uniformly-doped GaAs photocathode was limited by the surface charge limit (SCL). The SCL effect can be overcome by using an extremely high (>1019 cm-3) surface dopant concentration. When combined with a medium dopant concentration in the majority of the active layer (to avoid depolarization), the surface concentration has been found to degrade during normal heat cleaning (1 hour at 600 C). The Be dopant as typically used in an MBE-grown superlattice cathode is especially susceptible to this effect compared to Zn or C dopant. Some relief can be found by lowering the cleaning temperature, but the long-term general solution appears to be atomic hydrogen cleaning.
△ Less
Submitted 21 January, 2004;
originally announced January 2004.
-
The SLAC Polarized Electron Source
Authors:
J. E. Clendenin,
A. Brachmann,
T. Galetto,
D. -A. Luh,
T. Maruyama,
J. Sodja,
J. L. Turner
Abstract:
The SLAC PES, developed in the early 1990s for the SLC, has been in continuous use since 1992, during which time it has undergone numerous upgrades. The upgrades include improved cathodes with their matching laser systems, modified activation techniques and better diagnostics. The source itself and its performance with these upgrades will be described with special attention given to recent high-…
▽ More
The SLAC PES, developed in the early 1990s for the SLC, has been in continuous use since 1992, during which time it has undergone numerous upgrades. The upgrades include improved cathodes with their matching laser systems, modified activation techniques and better diagnostics. The source itself and its performance with these upgrades will be described with special attention given to recent high-intensity long-pulse operation for the E-158 fixed-target parity-violating experiment.
△ Less
Submitted 1 November, 2002;
originally announced November 2002.
-
SLAC's Polarized Electron Source Laser System and Minimization of Electron Beam Helicity Correlations for the E-158 Parity Violation Experiment
Authors:
T. B. Humensky,
R. Alley,
A. Brachmann,
M. J. Browne,
G. D. Cates,
J. Clendenin,
J. deLamare,
J. Frisch,
T. Galetto,
E. W. Hughes,
K. S. Kumar,
P. Mastromarino,
J. Sodja,
P. A. Souder,
J. Turner,
M. Woods
Abstract:
SLAC E-158 is an experiment designed to make the first measurement of parity violation in Moller scattering. E-158 will measure the right-left cross-section asymmetry, A_LR^Moller, in the elastic scattering of a 45-GeV polarized electron beam off unpolarized electrons in a liquid hydrogen target. E-158 plans to measure the expected Standard Model asymmetry of ~10^-7 to an accuracy of better than…
▽ More
SLAC E-158 is an experiment designed to make the first measurement of parity violation in Moller scattering. E-158 will measure the right-left cross-section asymmetry, A_LR^Moller, in the elastic scattering of a 45-GeV polarized electron beam off unpolarized electrons in a liquid hydrogen target. E-158 plans to measure the expected Standard Model asymmetry of ~10^-7 to an accuracy of better than 10^-8. To make this measurement, the polarized electron source requires for operation an intense circularly polarized laser beam and the ability to quickly switch between right- and left-helicity polarization states with minimal right-left helicity-correlated asymmetries in the resulting beam parameters (intensity, position, angle, spot size, and energy), ^beam A_LR's. This laser beam is produced by a unique SLAC-designed flashlamp-pumped Ti:Sapphire laser and is propagated through a carefully designed set of polarization optics. We analyze the transport of nearly circularly polarized light through the optical system and identify several mechanisms that generate ^beam A_LR's. We show that the dominant effects depend linearly on particular polarization phase shifts in the optical system. We present the laser system design and a discussion of the suppression and control of ^beam A_LR's. We also present results on beam performance from engineering and physics runs for E-158.
△ Less
Submitted 19 September, 2002; v1 submitted 18 September, 2002;
originally announced September 2002.
