-
Scanning NV magnetometry of focused-electron-beam-deposited cobalt nanomagnets
Authors:
Liza Žaper,
Peter Rickhaus,
Marcus Wyss,
Boris Gross,
Martino Poggio,
Floris Braakman
Abstract:
Focused-electron-beam-induced deposition is a promising technique for patterning nanomagnets for spin qubit control in a single step. We fabricate cobalt nanomagnets in such a process, obtaining cobalt contents and saturation magnetizations comparable to or higher than those typically obtained using electron-beam lithography. We characterize the nanomagnets using transmission electron microscopy a…
▽ More
Focused-electron-beam-induced deposition is a promising technique for patterning nanomagnets for spin qubit control in a single step. We fabricate cobalt nanomagnets in such a process, obtaining cobalt contents and saturation magnetizations comparable to or higher than those typically obtained using electron-beam lithography. We characterize the nanomagnets using transmission electron microscopy and image their stray magnetic field using scanning NV magnetometry, finding good agreement with micromagnetic simulations. The magnetometry reveals the presence of magnetic domains and halo side-deposits, which are common for this fabrication technique. Finally, we estimate dephasing times for electron spin qubits in the presence of disordered stray fields due to these side-deposits.
△ Less
Submitted 23 June, 2023; v1 submitted 11 June, 2023;
originally announced June 2023.
-
Mechanical mode imaging of a high-Q hybrid hBN/Si$_3$N$_4$ resonator
Authors:
David Jaeger,
Francesco Fogliano,
Thibaud Ruelle,
Aris Lafranca,
Floris Braakman,
Martino Poggio
Abstract:
We image and characterize the mechanical modes of a 2D drum resonator made of hBN suspended over a high-stress Si$_3$N$_4$ membrane. Our measurements demonstrate hybridization between various modes of the hBN resonator and those of the Si$_3$N$_4$ membrane. The measured resonance frequencies and spatial profiles of the modes are consistent with finite-element simulations based on an idealized geom…
▽ More
We image and characterize the mechanical modes of a 2D drum resonator made of hBN suspended over a high-stress Si$_3$N$_4$ membrane. Our measurements demonstrate hybridization between various modes of the hBN resonator and those of the Si$_3$N$_4$ membrane. The measured resonance frequencies and spatial profiles of the modes are consistent with finite-element simulations based on an idealized geometry. Spectra of the thermal motion reveal that, depending on the degree of hybridization with modes of the heavier and higher-quality-factor Si$_3$N$_4$ membrane, the quality factors and the motional mass of the hBN drum modes can be shifted by orders of magnitude. This effect could be exploited to engineer hybrid drum/membrane modes that combine the low motional mass of 2D materials with the high quality factor of Si$_3$N$_4$ membranes for optomechanical or sensing applications.
△ Less
Submitted 10 January, 2023;
originally announced January 2023.
-
A compact and versatile cryogenic probe station for quantum device testing
Authors:
Mathieu de Kruijf,
Simon Geyer,
Toni Berger,
Matthias Mergenthaler,
Floris Braakman,
Richard J. Warburton,
Andreas V. Kuhlmann
Abstract:
Fast feedback from cryogenic electrical characterization measurements is key for the development of scalable quantum computing technology. At room temperature, high-throughput device testing is accomplished with a probe-based solution, where electrical probes are repeatedly positioned onto devices for acquiring statistical data. In this work we present a probe station that can be operated from roo…
▽ More
Fast feedback from cryogenic electrical characterization measurements is key for the development of scalable quantum computing technology. At room temperature, high-throughput device testing is accomplished with a probe-based solution, where electrical probes are repeatedly positioned onto devices for acquiring statistical data. In this work we present a probe station that can be operated from room temperature down to below 2$\,$K. Its small size makes it compatible with standard cryogenic measurement setups with a magnet. A large variety of electronic devices can be tested. Here, we demonstrate the performance of the prober by characterizing silicon fin field-effect transistors as a host for quantum dot spin qubits. Such a tool can massively accelerate the design-fabrication-measurement cycle and provide important feedback for process optimization towards building scalable quantum circuits.
△ Less
Submitted 23 December, 2022;
originally announced December 2022.
-
Electron-beam lithography of nanostructures at the tips of scanning probe cantilevers
Authors:
Luca Forrer,
Aurèle Kamber,
Armin Knoll,
Martino Poggio,
Floris Braakman
Abstract:
We developed a process to fabricate nanoscale metallic gate electrodes on scanning probe cantilevers, including on the irregular surface of protruding cantilever tips. The process includes a floating-layer technique to coat the cantilevers in electron-beam resist. We demonstrate gate definition through a lift-off process, as well as through an etching process. The cantilevers maintain a high force…
▽ More
We developed a process to fabricate nanoscale metallic gate electrodes on scanning probe cantilevers, including on the irregular surface of protruding cantilever tips. The process includes a floating-layer technique to coat the cantilevers in electron-beam resist. We demonstrate gate definition through a lift-off process, as well as through an etching process. The cantilevers maintain a high force sensitivity after undergoing the patterning process. Our method allows the patterning of nanoscale devices on fragile scanning probes, extending their functionality as sensors.
△ Less
Submitted 23 September, 2022;
originally announced September 2022.
-
A tunable fiber Fabry-Perot cavity for hybrid optomechanics stabilized at 4 K
Authors:
Thibaud Ruelle,
David Jaeger,
Francesco Fogliano,
Floris Braakman,
Martino Poggio
Abstract:
We describe an apparatus for the implementation of hybrid optomechanical systems at 4 K. The platform is based on a high-finesse, micrometer-scale fiber Fabry-Perot cavity, which can be widely tuned using piezoelectric positioners. A mechanical resonator can be positioned within the cavity in the object-in-the-middle configuration by a second set of positioners. A high level of stability is achiev…
▽ More
We describe an apparatus for the implementation of hybrid optomechanical systems at 4 K. The platform is based on a high-finesse, micrometer-scale fiber Fabry-Perot cavity, which can be widely tuned using piezoelectric positioners. A mechanical resonator can be positioned within the cavity in the object-in-the-middle configuration by a second set of positioners. A high level of stability is achieved without sacrificing either performance or tunability, through the combination of a stiff mechanical design, passive vibration isolation, and an active Pound-Drever-Hall feedback lock incorporating a reconfigurable digital filter. The stability of the cavity length is demonstrated to be better than a few picometers over many hours both at room temperature and at 4 K.
△ Less
Submitted 6 May, 2022;
originally announced May 2022.
-
Cross-architecture Tuning of Silicon and SiGe-based Quantum Devices Using Machine Learning
Authors:
B. Severin,
D. T. Lennon,
L. C. Camenzind,
F. Vigneau,
F. Fedele,
D. Jirovec,
A. Ballabio,
D. Chrastina,
G. Isella,
M. de Kruijf,
M. J. Carballido,
S. Svab,
A. V. Kuhlmann,
F. R. Braakman,
S. Geyer,
F. N. M. Froning,
H. Moon,
M. A. Osborne,
D. Sejdinovic,
G. Katsaros,
D. M. Zumbühl,
G. A. D. Briggs,
N. Ares
Abstract:
The potential of Si and SiGe-based devices for the scaling of quantum circuits is tainted by device variability. Each device needs to be tuned to operation conditions. We give a key step towards tackling this variability with an algorithm that, without modification, is capable of tuning a 4-gate Si FinFET, a 5-gate GeSi nanowire and a 7-gate SiGe heterostructure double quantum dot device from scra…
▽ More
The potential of Si and SiGe-based devices for the scaling of quantum circuits is tainted by device variability. Each device needs to be tuned to operation conditions. We give a key step towards tackling this variability with an algorithm that, without modification, is capable of tuning a 4-gate Si FinFET, a 5-gate GeSi nanowire and a 7-gate SiGe heterostructure double quantum dot device from scratch. We achieve tuning times of 30, 10, and 92 minutes, respectively. The algorithm also provides insight into the parameter space landscape for each of these devices. These results show that overarching solutions for the tuning of quantum devices are enabled by machine learning.
△ Less
Submitted 27 July, 2021;
originally announced July 2021.
-
Strong spin-orbit interaction and $g$-factor renormalization of hole spins in Ge/Si nanowire quantum dots
Authors:
F. N. M. Froning,
M. J. Rančić,
B. Hetényi,
S. Bosco,
M. K. Rehmann,
A. Li,
E. P. A. M. Bakkers,
F. A. Zwanenburg,
D. Loss,
D. M. Zumbühl,
F. R. Braakman
Abstract:
The spin-orbit interaction lies at the heart of quantum computation with spin qubits, research on topologically non-trivial states, and various applications in spintronics. Hole spins in Ge/Si core/shell nanowires experience a spin-orbit interaction that has been predicted to be both strong and electrically tunable, making them a particularly promising platform for research in these fields. We exp…
▽ More
The spin-orbit interaction lies at the heart of quantum computation with spin qubits, research on topologically non-trivial states, and various applications in spintronics. Hole spins in Ge/Si core/shell nanowires experience a spin-orbit interaction that has been predicted to be both strong and electrically tunable, making them a particularly promising platform for research in these fields. We experimentally determine the strength of spin-orbit interaction of hole spins confined to a double quantum dot in a Ge/Si nanowire by measuring spin-mixing transitions inside a regime of spin-blockaded transport. We find a remarkably short spin-orbit length of $\sim$65 nm, comparable to the quantum dot length and the interdot distance. We additionally observe a large orbital effect of the applied magnetic field on the hole states, resulting in a large magnetic field dependence of the spin-mixing transition energies. Strikingly, together with these orbital effects, the strong spin-orbit interaction causes a significant enhancement of the $g$-factor with magnetic field.The large spin-orbit interaction strength demonstrated is consistent with the predicted direct Rashba spin-orbit interaction in this material system and is expected to enable ultrafast Rabi oscillations of spin qubits and efficient qubit-qubit interactions, as well as provide a platform suitable for studying Majorana zero modes.
△ Less
Submitted 8 July, 2020;
originally announced July 2020.
-
Ultrafast Hole Spin Qubit with Gate-Tunable Spin-Orbit Switch
Authors:
F. N. M. Froning,
L. C. Camenzind,
O. A. H. van der Molen,
A. Li,
E. P. A. M. Bakkers,
D. M. Zumbühl,
F. R. Braakman
Abstract:
A key challenge in quantum computation is the implementation of fast and local qubit control while simultaneously maintaining coherence. Qubits based on hole spins offer, through their strong spin-orbit interaction, a way to implement fast quantum gates. Strikingly, for hole spins in one-dimensional germanium and silicon devices, the spin-orbit interaction has been predicted to be exceptionally st…
▽ More
A key challenge in quantum computation is the implementation of fast and local qubit control while simultaneously maintaining coherence. Qubits based on hole spins offer, through their strong spin-orbit interaction, a way to implement fast quantum gates. Strikingly, for hole spins in one-dimensional germanium and silicon devices, the spin-orbit interaction has been predicted to be exceptionally strong yet highly tunable with gate voltages. Such electrical control would make it possible to switch on demand between qubit idling and manipulation modes. Here, we demonstrate ultrafast and universal quantum control of a hole spin qubit in a germanium/silicon core/shell nanowire, with Rabi frequencies of several hundreds of megahertz, corresponding to spin-flip** times as short as ~1 ns - a new record for a single-spin qubit. Next, we show a large degree of electrical control over the Rabi frequency, Zeeman energy, and coherence time - thus implementing a switch toggling from a rapid qubit manipulation mode to a more coherent idling mode. We identify an exceptionally strong but gate-tunable spin-orbit interaction as the underlying mechanism, with a short associated spin-orbit length that can be tuned over a large range down to 3 nm for holes of heavy-hole mass. Our work demonstrates a spin-orbit qubit switch and establishes hole spin qubits defined in one-dimensional germanium/silicon nanostructures as a fast and highly tunable platform for quantum computation.
△ Less
Submitted 3 March, 2021; v1 submitted 19 June, 2020;
originally announced June 2020.
-
Force sensing with nanowire cantilevers
Authors:
F. R. Braakman,
M. Poggio
Abstract:
Nanometer-scale structures with high aspect ratio such as nanowires and nanotubes combine low mechanical dissipation with high resonance frequencies, making them ideal force transducers and scanning probes in applications requiring the highest sensitivity. Such structures promise record force sensitivities combined with ease of use in scanning probe microscopes. A wide variety of possible material…
▽ More
Nanometer-scale structures with high aspect ratio such as nanowires and nanotubes combine low mechanical dissipation with high resonance frequencies, making them ideal force transducers and scanning probes in applications requiring the highest sensitivity. Such structures promise record force sensitivities combined with ease of use in scanning probe microscopes. A wide variety of possible material compositions and functionalizations is available, allowing for the sensing of various kinds of forces with optimized sensitivity. In addition, nanowires possess quasi-degenerate mechanical mode doublets, which has allowed the demonstration of sensitive vectorial force and mass detection. These developments have driven researchers to use nanowire cantilevers in various force sensing applications, which include imaging of sample surface topography, detection of optomechanical, electrical, and magnetic forces, and magnetic resonance force microscopy. In this review, we discuss the motivation behind using nanowires as force transducers, explain the methods of force sensing with nanowire cantilevers, and give an overview of the experimental progress and future prospects of the field.
△ Less
Submitted 17 January, 2019;
originally announced January 2019.
-
Optimized single-shot laser ablation of concave mirror templates on optical fibers
Authors:
Thibaud Ruelle,
Martino Poggio,
Floris R. Braakman
Abstract:
We realize mirror templates on the tips of optical fibers using a single-shot CO$_2$ laser ablation procedure. We perform a systematic study of the influence of the pulse power, pulse duration, and laser spot size on the radius of curvature, depth, and diameter of the mirror templates. We find that these geometrical characteristics can be tuned to a larger extent than has been previously reported,…
▽ More
We realize mirror templates on the tips of optical fibers using a single-shot CO$_2$ laser ablation procedure. We perform a systematic study of the influence of the pulse power, pulse duration, and laser spot size on the radius of curvature, depth, and diameter of the mirror templates. We find that these geometrical characteristics can be tuned to a larger extent than has been previously reported, and notably observe that compound convex-concave shapes can be obtained. This detailed investigation should help further the understanding of the physics of CO$_2$ laser ablation processes and help improve current models. We additionally identify regimes of ablation parameters that lead to mirror templates with favorable geometries for use in cavity quantum electrodynamics and optomechanics.
△ Less
Submitted 29 October, 2018;
originally announced November 2018.
-
Single, double, and triple quantum dots in Ge/Si nanowires
Authors:
F. N. M. Froning,
M. K. Rehmann,
J. Ridderbos,
M. Brauns,
F. A. Zwanenburg,
A. Li,
E. P. A. M. Bakkers,
D. M. Zumbühl,
F. R. Braakman
Abstract:
We report highly tunable control of holes in Ge/Si core/shell nanowires (NWs). We demonstrate the ability to create single quantum dots (QDs) of various sizes, with low hole occupation numbers and clearly observable excited states. For the smallest dot size we observe indications of single-hole occupation. Moreover, we create double and triple tunnel-coupled quantum dot arrays. In the double quant…
▽ More
We report highly tunable control of holes in Ge/Si core/shell nanowires (NWs). We demonstrate the ability to create single quantum dots (QDs) of various sizes, with low hole occupation numbers and clearly observable excited states. For the smallest dot size we observe indications of single-hole occupation. Moreover, we create double and triple tunnel-coupled quantum dot arrays. In the double quantum dot configuration we observe Pauli spin blockade (PSB). These results open the way to perform hole spin qubit experiments in these devices.
△ Less
Submitted 7 May, 2018;
originally announced May 2018.
-
Coherent two-mode dynamics of a nanowire force sensor
Authors:
Floris R. Braakman,
Nicola Rossi,
Gözde Tütüncüoglu,
Anna Fontcuberta i Morral,
Martino Poggio
Abstract:
Classically coherent dynamics analogous to those of quantum two-level systems are studied in the setting of force sensing. We demonstrate quantitative control over the coupling between two orthogonal mechanical modes of a nanowire cantilever, through measurement of avoided crossings as we deterministically position the nanowire inside an electric field. Furthermore, we demonstrate Rabi oscillation…
▽ More
Classically coherent dynamics analogous to those of quantum two-level systems are studied in the setting of force sensing. We demonstrate quantitative control over the coupling between two orthogonal mechanical modes of a nanowire cantilever, through measurement of avoided crossings as we deterministically position the nanowire inside an electric field. Furthermore, we demonstrate Rabi oscillations between the two mechanical modes in the strong coupling regime. These results give prospects of implementing coherent two-mode control techniques for force sensing signal enhancement.
△ Less
Submitted 2 February, 2018;
originally announced February 2018.
-
Vectorial scanning force microscopy using a nanowire sensor
Authors:
N. Rossi,
F. R. Braakman,
D. Cadeddu,
D. Vasyukov,
G. Tütüncüoglu,
A. Fontcuberta i Morral,
M. Poggio
Abstract:
Self-assembled nanowire (NW) crystals can be grown into nearly defect-free nanomechanical resonators with exceptional properties, including small motional mass, high resonant frequency, and low dissipation. Furthermore, by virtue of slight asymmetries in geometry, a NW's flexural modes are split into doublets oscillating along orthogonal axes. These characteristics make bottom-up grown NWs extreme…
▽ More
Self-assembled nanowire (NW) crystals can be grown into nearly defect-free nanomechanical resonators with exceptional properties, including small motional mass, high resonant frequency, and low dissipation. Furthermore, by virtue of slight asymmetries in geometry, a NW's flexural modes are split into doublets oscillating along orthogonal axes. These characteristics make bottom-up grown NWs extremely sensitive vectorial force sensors. Here, taking advantage of its adaptability as a scanning probe, we use a single NW to image a sample surface. By monitoring the frequency shift and direction of oscillation of both modes as we scan above the surface, we construct a map of all spatial tip-sample force derivatives in the plane. Finally, we use the NW to image electric force fields distinguishing between forces arising from the NW charge and polarizability. This universally applicable technique enables a form of atomic force microscopy particularly suited to map** the size and direction of weak tip-sample forces.
△ Less
Submitted 4 April, 2016;
originally announced April 2016.
-
A quantum fiber-pigtail
Authors:
Davide Cadeddu,
Jean Teissier,
Floris Braakman,
Niels Gregersen,
Petr Stepanov,
Jean-Michel Gérard,
Julien Claudon,
Richard J. Warburton,
Martino Poggio,
Mathieu Munsch
Abstract:
We present the experimental realization of a quantum fiber-pigtail. The device consists of a semiconductor quantum-dot embedded into a conical photonic wire that is directly connected to the core of a fiber-pigtail. We demonstrate a photon collection efficiency at the output of the fiber of 5.8% and suggest realistic improvements for the implementation of a useful device in the context of quantum…
▽ More
We present the experimental realization of a quantum fiber-pigtail. The device consists of a semiconductor quantum-dot embedded into a conical photonic wire that is directly connected to the core of a fiber-pigtail. We demonstrate a photon collection efficiency at the output of the fiber of 5.8% and suggest realistic improvements for the implementation of a useful device in the context of quantum information. We finally discuss potential applications in scanning probe microscopy.
△ Less
Submitted 22 June, 2015;
originally announced June 2015.
-
Fast Long-Distance Control of Spin Qubits by Photon Assisted Cotunneling
Authors:
Peter Stano,
Jelena Klinovaja,
Floris R. Braakman,
Lieven M. K. Vandersypen,
Daniel Loss
Abstract:
We investigate theoretically the long-distance coupling and spin exchange in an array of quantum dot spin qubits in the presence of microwaves. We find that photon assisted cotunneling is boosted at resonances between photon and energies of virtually occupied excited states and show how to make it spin selective. We identify configurations that enable fast switching and spin echo sequences for eff…
▽ More
We investigate theoretically the long-distance coupling and spin exchange in an array of quantum dot spin qubits in the presence of microwaves. We find that photon assisted cotunneling is boosted at resonances between photon and energies of virtually occupied excited states and show how to make it spin selective. We identify configurations that enable fast switching and spin echo sequences for efficient and non-local manipulation of spin qubits. We devise configurations in which the near-resonantly boosted cotunneling provides non-local coupling which, up to certain limit, does not diminish with distance between the manipulated dots before it decays weakly with inverse distance.
△ Less
Submitted 21 July, 2015; v1 submitted 16 September, 2014;
originally announced September 2014.
-
Nonlinear motion and mechanical mixing in as-grown GaAs nanowires
Authors:
F. R. Braakman,
D. Cadeddu,
G. Tütüncüoglu,
F. Matteini,
D. Rüffer,
A. Fontcuberta i Morral,
M. Poggio
Abstract:
We report nonlinear behavior in the motion of driven nanowire cantilevers. The nonlinearity can be described by the Duffing equation and is used to demonstrate mechanical mixing of two distinct excitation frequencies. Furthermore, we demonstrate that the nonlinearity can be used to amplify a signal at a frequency close to the mechanical resonance of the nanowire oscillator. Up to 26 dB of amplitud…
▽ More
We report nonlinear behavior in the motion of driven nanowire cantilevers. The nonlinearity can be described by the Duffing equation and is used to demonstrate mechanical mixing of two distinct excitation frequencies. Furthermore, we demonstrate that the nonlinearity can be used to amplify a signal at a frequency close to the mechanical resonance of the nanowire oscillator. Up to 26 dB of amplitude gain are demonstrated in this way.
△ Less
Submitted 23 June, 2014;
originally announced June 2014.
-
Electrical control of a long-lived spin qubit in a Si/SiGe quantum dot
Authors:
E. Kawakami,
P. Scarlino,
D. R. Ward,
F. R. Braakman,
D. E. Savage,
M. G. Lagally,
Mark Friesen,
S. N. Coppersmith,
M. A. Eriksson,
L. M. K. Vandersypen
Abstract:
Nanofabricated quantum bits permit large-scale integration but usually suffer from short coherence times due to interactions with their solid-state environment. The outstanding challenge is to engineer the environment so that it minimally affects the qubit, but still allows qubit control and scalability. Here we demonstrate a long-lived single-electron spin qubit in a Si/SiGe quantum dot with all-…
▽ More
Nanofabricated quantum bits permit large-scale integration but usually suffer from short coherence times due to interactions with their solid-state environment. The outstanding challenge is to engineer the environment so that it minimally affects the qubit, but still allows qubit control and scalability. Here we demonstrate a long-lived single-electron spin qubit in a Si/SiGe quantum dot with all-electrical two-axis control. The spin is driven by resonant microwave electric fields in a transverse magnetic field gradient from a local micromagnet, and the spin state is read out in single-shot mode. Electron spin resonance occurs at two closely spaced frequencies, which we attribute to two valley states. Thanks to the weak hyperfine coupling in silicon, Ramsey and Hahn echo decay timescales of 1us and 40us, respectively, are observed. This is almost two orders of magnitude longer than the intrinsic timescales in III-V quantum dots, while gate operation times are comparable to those achieved in GaAs. This places the single-qubit rotations in the fault-tolerant regime and strongly raises the prospects of quantum information processing based on quantum dots.
△ Less
Submitted 22 April, 2014;
originally announced April 2014.
-
Dynamics of spin-flip photon-assisted tunneling
Authors:
F. R. Braakman,
J. Danon,
L. R. Schreiber,
W. Wegscheider,
L. M. K. Vandersypen
Abstract:
We present time-resolved measurements of spin-flip photon-assisted tunneling and spin-flip relaxation in a doubly occupied double quantum dot. The photon-assisted excitation rate as a function of magnetic field indicates that spin-orbit coupling is the dominant mechanism behind the spin-flip under the present conditions. We are able to extract the resulting effective `spin-flip tunneling' energy,…
▽ More
We present time-resolved measurements of spin-flip photon-assisted tunneling and spin-flip relaxation in a doubly occupied double quantum dot. The photon-assisted excitation rate as a function of magnetic field indicates that spin-orbit coupling is the dominant mechanism behind the spin-flip under the present conditions. We are able to extract the resulting effective `spin-flip tunneling' energy, which is found to be three orders of magnitude smaller than the regular spin-conserving tunneling energy. We also measure the relaxation and dephasing times of a qubit formed out of two two-electron states with different spin and charge configurations.
△ Less
Submitted 5 January, 2014;
originally announced January 2014.
-
Photon- and phonon-assisted tunneling in the three-dimensional charge stability diagram of a triple quantum dot array
Authors:
Floris R. Braakman,
Pierre Barthelemy,
Christian Reichl,
Werner Wegscheider,
Lieven M. K. Vandersypen
Abstract:
We report both photon- and phonon-assisted tunneling transitions in a linear array of three quantum dots, which can only be understood by considering the full three-dimensionality of the charge stability diagram. Such tunneling transitions potentially contribute to leakage of qubits defined in this system. A detailed understanding of these transitions is important as they become more abundant and…
▽ More
We report both photon- and phonon-assisted tunneling transitions in a linear array of three quantum dots, which can only be understood by considering the full three-dimensionality of the charge stability diagram. Such tunneling transitions potentially contribute to leakage of qubits defined in this system. A detailed understanding of these transitions is important as they become more abundant and complex to analyze as quantum dot arrays are scaled up.
△ Less
Submitted 11 March, 2013;
originally announced March 2013.
-
Long-range coherent coupling in a quantum dot array
Authors:
Floris R. Braakman,
Pierre Barthelemy,
Christian Reichl,
Werner Wegscheider,
Lieven M. K. Vandersypen
Abstract:
Controlling long-range quantum correlations is central to quantum computation and simulation. In quantum dot arrays, experiments so far rely on nearest-neighbour couplings only, and inducing long-range correlations requires sequential local operations. Here we show that two distant sites can be tunnel coupled directly. The coupling is mediated by virtual occupation of an intermediate site, with a…
▽ More
Controlling long-range quantum correlations is central to quantum computation and simulation. In quantum dot arrays, experiments so far rely on nearest-neighbour couplings only, and inducing long-range correlations requires sequential local operations. Here we show that two distant sites can be tunnel coupled directly. The coupling is mediated by virtual occupation of an intermediate site, with a strength that is controlled via the energy detuning of this site. It permits a single charge to oscillate coherently between the outer sites of a triple dot array without passing through the middle, as demonstrated through the observation of Landau-Zener-Stückelberg interference. The long-range coupling significantly improves the prospects of fault-tolerant quantum computation using quantum dot arrays and opens up new avenues for performing quantum simulations in nanoscale devices.
△ Less
Submitted 5 March, 2013;
originally announced March 2013.
-
Coupling molecular spin states by photon-assisted tunneling
Authors:
L. R. Schreiber,
F. R. Braakman,
T. Meunier,
V. Calado,
J. Danon,
J. M. Taylor,
W. Wegscheider,
L. M. K. Vandersypen
Abstract:
Artificial molecules containing just one or two electrons provide a powerful platform for studies of orbital and spin quantum dynamics in nanoscale devices. A well-known example of these dynamics is tunneling of electrons between two coupled quantum dots triggered by microwave irradiation. So far, these tunneling processes have been treated as electric dipole-allowed spin-conserving events. Here w…
▽ More
Artificial molecules containing just one or two electrons provide a powerful platform for studies of orbital and spin quantum dynamics in nanoscale devices. A well-known example of these dynamics is tunneling of electrons between two coupled quantum dots triggered by microwave irradiation. So far, these tunneling processes have been treated as electric dipole-allowed spin-conserving events. Here we report that microwaves can also excite tunneling transitions between states with different spin. In this work, the dominant mechanism responsible for violation of spin conservation is the spin-orbit interaction. These transitions make it possible to perform detailed microwave spectroscopy of the molecular spin states of an artificial hydrogen molecule and open up the possibility of realizing full quantum control of a two spin system via microwave excitation.
△ Less
Submitted 27 October, 2010;
originally announced October 2010.
-
Impedance model for the polarization-dependent optical absorption of superconducting single-photon detectors
Authors:
E. F. C. Driessen,
F. R. Braakman,
E. M. Reiger,
S. N. Dorenbos,
V. Zwiller,
M. J. A. de Dood
Abstract:
We measured the single-photon detection efficiency of NbN superconducting single photon detectors as a function of the polarization state of the incident light for different wavelengths in the range from 488 nm to 1550 nm. The polarization contrast varies from ~5% at 488 nm to ~30% at 1550 nm, in good agreement with numerical calculations. We use an optical-impedance model to describe the absorp…
▽ More
We measured the single-photon detection efficiency of NbN superconducting single photon detectors as a function of the polarization state of the incident light for different wavelengths in the range from 488 nm to 1550 nm. The polarization contrast varies from ~5% at 488 nm to ~30% at 1550 nm, in good agreement with numerical calculations. We use an optical-impedance model to describe the absorption for polarization parallel to the wires of the detector. For lossy NbN films, the absorption can be kept constant by kee** the product of layer thickness and filling factor constant. As a consequence, we find that the maximum possible absorption is independent of filling factor. By illuminating the detector through the substrate, an absorption efficiency of ~70% can be reached for a detector on Si or GaAs, without the need for an optical cavity.
△ Less
Submitted 30 January, 2009;
originally announced January 2009.
