Showing 1–50 of 127 results for author: Brüne, C

Sparsifying dimensionality reduction of PDE solution data with Bregman learning

Authors: Tjeerd Jan Heeringa, Christoph Brune, Mengwu Guo

Abstract: Classical model reduction techniques project the governing equations onto a linear subspace of the original state space. More recent data-driven techniques use neural networks to enable nonlinear projections. Whilst those often enable stronger compression, they may have redundant parameters and lead to suboptimal latent dimensionality. To overcome these, we propose a multistep algorithm that induc… ▽ More Classical model reduction techniques project the governing equations onto a linear subspace of the original state space. More recent data-driven techniques use neural networks to enable nonlinear projections. Whilst those often enable stronger compression, they may have redundant parameters and lead to suboptimal latent dimensionality. To overcome these, we propose a multistep algorithm that induces sparsity in the encoder-decoder networks for effective reduction in the number of parameters and additional compression of the latent space. This algorithm starts with sparsely initialized a network and training it using linearized Bregman iterations. These iterations have been very successful in computer vision and compressed sensing tasks, but have not yet been used for reduced-order modelling. After the training, we further compress the latent space dimensionality by using a form of proper orthogonal decomposition. Last, we use a bias propagation technique to change the induced sparsity into an effective reduction of parameters. We apply this algorithm to three representative PDE models: 1D diffusion, 1D advection, and 2D reaction-diffusion. Compared to conventional training methods like Adam, the proposed method achieves similar accuracy with 30% less parameters and a significantly smaller latent space. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Comments: 27 pages, 20 figures, 4 tables

MSC Class: 65K10 (Primary) 68T07; 65D99; 41A63 (Secondary) ACM Class: G.1.6; I.2.6

Solar fusion III: New data and theory for hydrogen-burning stars

Authors: B. Acharya, M. Aliotta, A. B. Balantekin, D. Bemmerer, C. A. Bertulani, A. Best, C. R. Brune, R. Buompane, F. Cavanna, J. W. Chen, J. Colgan, A. Czarnecki, B. Davids, R. J. deBoer, F. Delahaye, R. Depalo, A. García, M. Gatu Johnson, D. Gazit, L. Gialanella, U. Greife, D. Guffanti, A. Guglielmetti, K. Hambleton, W. C. Haxton , et al. (25 additional authors not shown)

Abstract: In stars that lie on the main sequence in the Hertzsprung Russel diagram, like our sun, hydrogen is fused to helium in a number of nuclear reaction chains and series, such as the proton-proton chain and the carbon-nitrogen-oxygen cycles. Precisely determined thermonuclear rates of these reactions lie at the foundation of the standard solar model. This review, the third decadal evaluation of the nu… ▽ More In stars that lie on the main sequence in the Hertzsprung Russel diagram, like our sun, hydrogen is fused to helium in a number of nuclear reaction chains and series, such as the proton-proton chain and the carbon-nitrogen-oxygen cycles. Precisely determined thermonuclear rates of these reactions lie at the foundation of the standard solar model. This review, the third decadal evaluation of the nuclear physics of hydrogen-burning stars, is motivated by the great advances made in recent years by solar neutrino observatories, putting experimental knowledge of the proton-proton chain neutrino fluxes in the few-percent precision range. The basis of the review is a one-week community meeting held in July 2022 in Berkeley, California, and many subsequent digital meetings and exchanges. Each of the relevant reactions of solar and quiescent stellar hydrogen burning is reviewed here, from both theoretical and experimental perspectives. Recommendations for the state of the art of the astrophysical S-factor and its uncertainty are formulated for each of them. Several other topics of paramount importance for the solar model are reviewed, as well: recent and future neutrino experiments, electron screening, radiative opacities, and current and upcoming experimental facilities. In addition to reaction-specific recommendations, also general recommendations are formed. △ Less

Submitted 10 May, 2024; originally announced May 2024.

Comments: 85 pages, 15 figures. To be submitted to Reviews of Modern Physics

Report number: N3AS-24-016

Global Control for Local SO(3)-Equivariant Scale-Invariant Vessel Segmentation

Authors: Patryk Rygiel, Dieuwertje Alblas, Christoph Brune, Kak Khee Yeung, Jelmer M. Wolterink

Abstract: Personalized 3D vascular models can aid in a range of diagnostic, prognostic, and treatment-planning tasks relevant to cardiovascular disease management. Deep learning provides a means to automatically obtain such models. Ideally, a user should have control over the exact region of interest (ROI) to be included in a vascular model, and the model should be watertight and highly accurate. To this en… ▽ More Personalized 3D vascular models can aid in a range of diagnostic, prognostic, and treatment-planning tasks relevant to cardiovascular disease management. Deep learning provides a means to automatically obtain such models. Ideally, a user should have control over the exact region of interest (ROI) to be included in a vascular model, and the model should be watertight and highly accurate. To this end, we propose a combination of a global controller leveraging voxel mask segmentations to provide boundary conditions for vessels of interest to a local, iterative vessel segmentation model. We introduce the preservation of scale- and rotational symmetries in the local segmentation model, leading to generalisation to vessels of unseen sizes and orientations. Combined with the global controller, this enables flexible 3D vascular model building, without additional retraining. We demonstrate the potential of our method on a dataset containing abdominal aortic aneurysms (AAAs). Our method performs on par with a state-of-the-art segmentation model in the segmentation of AAAs, iliac arteries and renal arteries, while providing a watertight, smooth surface segmentation. Moreover, we demonstrate that by adapting the global controller, we can easily extend vessel sections in the 3D model. △ Less

Submitted 22 March, 2024; originally announced March 2024.

Learning a Sparse Representation of Barron Functions with the Inverse Scale Space Flow

Authors: Tjeerd Jan Heeringa, Tim Roith, Christoph Brune, Martin Burger

Abstract: This paper presents a method for finding a sparse representation of Barron functions. Specifically, given an $L^2$ function $f$, the inverse scale space flow is used to find a sparse measure $μ$ minimising the $L^2$ loss between the Barron function associated to the measure $μ$ and the function $f$. The convergence properties of this method are analysed in an ideal setting and in the cases of meas… ▽ More This paper presents a method for finding a sparse representation of Barron functions. Specifically, given an $L^2$ function $f$, the inverse scale space flow is used to find a sparse measure $μ$ minimising the $L^2$ loss between the Barron function associated to the measure $μ$ and the function $f$. The convergence properties of this method are analysed in an ideal setting and in the cases of measurement noise and sampling bias. In an ideal setting the objective decreases strictly monotone in time to a minimizer with $\mathcal{O}(1/t)$, and in the case of measurement noise or sampling bias the optimum is achieved up to a multiplicative or additive constant. This convergence is preserved on discretization of the parameter space, and the minimizers on increasingly fine discretizations converge to the optimum on the full parameter space. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 30 pages, 0 figures

MSC Class: 47A52; 68T07; 65K10; 90C25 ACM Class: I.2.6; F.2.1; G.1.6

SIRE: scale-invariant, rotation-equivariant estimation of artery orientations using graph neural networks

Authors: Dieuwertje Alblas, Julian Suk, Christoph Brune, Kak Khee Yeung, Jelmer M. Wolterink

Abstract: Blood vessel orientation as visualized in 3D medical images is an important descriptor of its geometry that can be used for centerline extraction and subsequent segmentation and visualization. Arteries appear at many scales and levels of tortuosity, and determining their exact orientation is challenging. Recent works have used 3D convolutional neural networks (CNNs) for this purpose, but CNNs are… ▽ More Blood vessel orientation as visualized in 3D medical images is an important descriptor of its geometry that can be used for centerline extraction and subsequent segmentation and visualization. Arteries appear at many scales and levels of tortuosity, and determining their exact orientation is challenging. Recent works have used 3D convolutional neural networks (CNNs) for this purpose, but CNNs are sensitive to varying vessel sizes and orientations. We present SIRE: a scale-invariant, rotation-equivariant estimator for local vessel orientation. SIRE is modular and can generalise due to symmetry preservation. SIRE consists of a gauge equivariant mesh CNN (GEM-CNN) operating on multiple nested spherical meshes with different sizes in parallel. The features on each mesh are a projection of image intensities within the corresponding sphere. These features are intrinsic to the sphere and, in combination with the GEM-CNN, lead to SO(3)-equivariance. Approximate scale invariance is achieved by weight sharing and use of a symmetric maximum function to combine multi-scale predictions. Hence, SIRE can be trained with arbitrarily oriented vessels with varying radii to generalise to vessels with a wide range of calibres and tortuosity. We demonstrate the efficacy of SIRE using three datasets containing vessels of varying scales: the vascular model repository (VMR), the ASOCA coronary artery set, and a set of abdominal aortic aneurysms (AAAs). We embed SIRE in a centerline tracker which accurately tracks AAAs, regardless of the data SIRE is trained with. Moreover, SIRE can be used to track coronary arteries, even when trained only with AAAs. In conclusion, by incorporating SO(3) and scale symmetries, SIRE can determine the orientations of vessels outside of the training domain, forming a robust and data-efficient solution to geometric analysis of blood vessels in 3D medical images. △ Less

Submitted 9 November, 2023; originally announced November 2023.

Comments: Submitted to Medical Image Analysis

Measurement of Charge State Distributions using a Scintillation Screen

Authors: C. Marshall, Z. Meisel, F. Montes, L. Wagner, K. Hermansen, R. Garg, K. A. Chipps, P. Tsintari, N. Dimitrakopoulos, G. P. A. Berg, C. Brune, M. Couder, U. Greife, H. Schatz, M. S. Smith

Abstract: Absolute cross sections measured using electromagnetic devices to separate and detect heavy recoiling ions need to be corrected for charge state fractions. Accurate prediction of charge state distributions using theoretical models is not always a possibility, especially in energy and mass regions where data is sparse. As such, it is often necessary to measure charge state fractions directly. In th… ▽ More Absolute cross sections measured using electromagnetic devices to separate and detect heavy recoiling ions need to be corrected for charge state fractions. Accurate prediction of charge state distributions using theoretical models is not always a possibility, especially in energy and mass regions where data is sparse. As such, it is often necessary to measure charge state fractions directly. In this paper we present a novel method of using a scintillation screen along with a CMOS camera to image the charge dispersed beam after a set of magnetic dipoles. A measurement of the charge state distribution for 88Sr passing through a natural carbon foil is performed. Using a Bayesian model to extract statistically meaningful uncertainties from these images, we find agreement between the new method and a more traditional method using Faraday cups. Future work is need to better understand systematic uncertainties. Our technique offers a viable method to measure charge state distributions. △ Less

Submitted 7 September, 2023; v1 submitted 6 September, 2023; originally announced September 2023.

Uncertainty-based quality assurance of carotid artery wall segmentation in black-blood MRI

Authors: Elina Thibeau-Sutre, Dieuwertje Alblas, Sophie Buurman, Christoph Brune, Jelmer M. Wolterink

Abstract: The application of deep learning models to large-scale data sets requires means for automatic quality assurance. We have previously developed a fully automatic algorithm for carotid artery wall segmentation in black-blood MRI that we aim to apply to large-scale data sets. This method identifies nested artery walls in 3D patches centered on the carotid artery. In this study, we investigate to what… ▽ More The application of deep learning models to large-scale data sets requires means for automatic quality assurance. We have previously developed a fully automatic algorithm for carotid artery wall segmentation in black-blood MRI that we aim to apply to large-scale data sets. This method identifies nested artery walls in 3D patches centered on the carotid artery. In this study, we investigate to what extent the uncertainty in the model predictions for the contour location can serve as a surrogate for error detection and, consequently, automatic quality assurance. We express the quality of automatic segmentations using the Dice similarity coefficient. The uncertainty in the model's prediction is estimated using either Monte Carlo dropout or test-time data augmentation. We found that (1) including uncertainty measurements did not degrade the quality of the segmentations, (2) uncertainty metrics provide a good proxy of the quality of our contours if the center found during the first step is enclosed in the lumen of the carotid artery and (3) they could be used to detect low-quality segmentations at the participant level. This automatic quality assurance tool might enable the application of our model in large-scale data sets. △ Less

Submitted 18 August, 2023; originally announced August 2023.

DFM-X: Augmentation by Leveraging Prior Knowledge of Shortcut Learning

Authors: Shunxin Wang, Christoph Brune, Raymond Veldhuis, Nicola Strisciuglio

Abstract: Neural networks are prone to learn easy solutions from superficial statistics in the data, namely shortcut learning, which impairs generalization and robustness of models. We propose a data augmentation strategy, named DFM-X, that leverages knowledge about frequency shortcuts, encoded in Dominant Frequencies Maps computed for image classification models. We randomly select X% training images of ce… ▽ More Neural networks are prone to learn easy solutions from superficial statistics in the data, namely shortcut learning, which impairs generalization and robustness of models. We propose a data augmentation strategy, named DFM-X, that leverages knowledge about frequency shortcuts, encoded in Dominant Frequencies Maps computed for image classification models. We randomly select X% training images of certain classes for augmentation, and process them by retaining the frequencies included in the DFMs of other classes. This strategy compels the models to leverage a broader range of frequencies for classification, rather than relying on specific frequency sets. Thus, the models learn more deep and task-related semantics compared to their counterpart trained with standard setups. Unlike other commonly used augmentation techniques which focus on increasing the visual variations of training data, our method targets exploiting the original data efficiently, by distilling prior knowledge about destructive learning behavior of models from data. Our experimental results demonstrate that DFM-X improves robustness against common corruptions and adversarial attacks. It can be seamlessly integrated with other augmentation techniques to further enhance the robustness of models. △ Less

Submitted 12 August, 2023; originally announced August 2023.

Comments: Accepted at ICCVW2023

Defocus Blur Synthesis and Deblurring via Interpolation and Extrapolation in Latent Space

Authors: Ioana Mazilu, Shunxin Wang, Sven Dummer, Raymond Veldhuis, Christoph Brune, Nicola Strisciuglio

Abstract: Though modern microscopes have an autofocusing system to ensure optimal focus, out-of-focus images can still occur when cells within the medium are not all in the same focal plane, affecting the image quality for medical diagnosis and analysis of diseases. We propose a method that can deblur images as well as synthesize defocus blur. We train autoencoders with implicit and explicit regularization… ▽ More Though modern microscopes have an autofocusing system to ensure optimal focus, out-of-focus images can still occur when cells within the medium are not all in the same focal plane, affecting the image quality for medical diagnosis and analysis of diseases. We propose a method that can deblur images as well as synthesize defocus blur. We train autoencoders with implicit and explicit regularization techniques to enforce linearity relations among the representations of different blur levels in the latent space. This allows for the exploration of different blur levels of an object by linearly interpolating/extrapolating the latent representations of images taken at different focal planes. Compared to existing works, we use a simple architecture to synthesize images with flexible blur levels, leveraging the linear latent space. Our regularized autoencoders can effectively mimic blur and deblur, increasing data variety as a data augmentation technique and improving the quality of microscopic images, which would be beneficial for further processing and analysis. △ Less

Submitted 28 July, 2023; originally announced July 2023.

Comments: Accepted at CAIP2023

What do neural networks learn in image classification? A frequency shortcut perspective

Authors: Shunxin Wang, Raymond Veldhuis, Christoph Brune, Nicola Strisciuglio

Abstract: Frequency analysis is useful for understanding the mechanisms of representation learning in neural networks (NNs). Most research in this area focuses on the learning dynamics of NNs for regression tasks, while little for classification. This study empirically investigates the latter and expands the understanding of frequency shortcuts. First, we perform experiments on synthetic datasets, designed… ▽ More Frequency analysis is useful for understanding the mechanisms of representation learning in neural networks (NNs). Most research in this area focuses on the learning dynamics of NNs for regression tasks, while little for classification. This study empirically investigates the latter and expands the understanding of frequency shortcuts. First, we perform experiments on synthetic datasets, designed to have a bias in different frequency bands. Our results demonstrate that NNs tend to find simple solutions for classification, and what they learn first during training depends on the most distinctive frequency characteristics, which can be either low- or high-frequencies. Second, we confirm this phenomenon on natural images. We propose a metric to measure class-wise frequency characteristics and a method to identify frequency shortcuts. The results show that frequency shortcuts can be texture-based or shape-based, depending on what best simplifies the objective. Third, we validate the transferability of frequency shortcuts on out-of-distribution (OOD) test sets. Our results suggest that frequency shortcuts can be transferred across datasets and cannot be fully avoided by larger model capacity and data augmentation. We recommend that future research should focus on effective training schemes mitigating frequency shortcut learning. △ Less

Submitted 30 August, 2023; v1 submitted 19 July, 2023; originally announced July 2023.

Comments: Accepted at ICCV2023

Trajectory Generation, Control, and Safety with Denoising Diffusion Probabilistic Models

Authors: Nicolò Botteghi, Federico Califano, Mannes Poel, Christoph Brune

Abstract: We present a framework for safety-critical optimal control of physical systems based on denoising diffusion probabilistic models (DDPMs). The technology of control barrier functions (CBFs), encoding desired safety constraints, is used in combination with DDPMs to plan actions by iteratively denoising trajectories through a CBF-based guided sampling procedure. At the same time, the generated trajec… ▽ More We present a framework for safety-critical optimal control of physical systems based on denoising diffusion probabilistic models (DDPMs). The technology of control barrier functions (CBFs), encoding desired safety constraints, is used in combination with DDPMs to plan actions by iteratively denoising trajectories through a CBF-based guided sampling procedure. At the same time, the generated trajectories are also guided to maximize a future cumulative reward representing a specific task to be optimally executed. The proposed scheme can be seen as an offline and model-based reinforcement learning algorithm resembling in its functionalities a model-predictive control optimization scheme with receding horizon in which the selected actions lead to optimal and safe trajectories. △ Less

Submitted 27 June, 2023; originally announced June 2023.

Embeddings between Barron spaces with higher order activation functions

Authors: Tjeerd Jan Heeringa, Len Spek, Felix Schwenninger, Christoph Brune

Abstract: The approximation properties of infinitely wide shallow neural networks heavily depend on the choice of the activation function. To understand this influence, we study embeddings between Barron spaces with different activation functions. These embeddings are proven by providing push-forward maps on the measures $μ$ used to represent functions $f$. An activation function of particular interest is t… ▽ More The approximation properties of infinitely wide shallow neural networks heavily depend on the choice of the activation function. To understand this influence, we study embeddings between Barron spaces with different activation functions. These embeddings are proven by providing push-forward maps on the measures $μ$ used to represent functions $f$. An activation function of particular interest is the rectified power unit ($\operatorname{RePU}$) given by $\operatorname{RePU}_s(x)=\max(0,x)^s$. For many commonly used activation functions, the well-known Taylor remainder theorem can be used to construct a push-forward map, which allows us to prove the embedding of the associated Barron space into a Barron space with a $\operatorname{RePU}$ as activation function. Moreover, the Barron spaces associated with the $\operatorname{RePU}_s$ have a hierarchical structure similar to the Sobolev spaces $H^m$. △ Less

Submitted 18 June, 2024; v1 submitted 25 May, 2023; originally announced May 2023.

Comments: 21 pages, 1 figure; revision adds extension to fractional RePU and fractional Taylor expansion

MSC Class: 46E35 (Primary) 46E15; 46G12 (Secondary) ACM Class: I.2.6; G.1.9

RDA-INR: Riemannian Diffeomorphic Autoencoding via Implicit Neural Representations

Authors: Sven Dummer, Nicola Strisciuglio, Christoph Brune

Abstract: Diffeomorphic registration frameworks such as Large Deformation Diffeomorphic Metric Map** (LDDMM) are used in computer graphics and the medical domain for atlas building, statistical latent modeling, and pairwise and groupwise registration. In recent years, researchers have developed neural network-based approaches regarding diffeomorphic registration to improve the accuracy and computational e… ▽ More Diffeomorphic registration frameworks such as Large Deformation Diffeomorphic Metric Map** (LDDMM) are used in computer graphics and the medical domain for atlas building, statistical latent modeling, and pairwise and groupwise registration. In recent years, researchers have developed neural network-based approaches regarding diffeomorphic registration to improve the accuracy and computational efficiency of traditional methods. In this work, we focus on a limitation of neural network-based atlas building and statistical latent modeling methods, namely that they either are (i) resolution dependent or (ii) disregard any data/problem-specific geometry needed for proper mean-variance analysis. In particular, we overcome this limitation by designing a novel encoder based on resolution-independent implicit neural representations. The encoder achieves resolution invariance for LDDMM-based statistical latent modeling. Additionally, the encoder adds LDDMM Riemannian geometry to resolution-independent deep learning models for statistical latent modeling. We showcase that the Riemannian geometry aspect improves latent modeling and is required for a proper mean-variance analysis. Furthermore, to showcase the benefit of resolution independence for LDDMM-based data variability modeling, we show that our approach outperforms another neural network-based LDDMM latent code model. Our work paves a way to more research into how Riemannian geometry, shape/image analysis, and deep learning can be combined. △ Less

Submitted 17 March, 2024; v1 submitted 22 May, 2023; originally announced May 2023.

Comments: 34 pages, 27 figures (including subfigures)

MSC Class: 58D05; 53A05; 58B20; 68T07; 62-07; 68U10

A Survey on the Robustness of Computer Vision Models against Common Corruptions

Authors: Shunxin Wang, Raymond Veldhuis, Christoph Brune, Nicola Strisciuglio

Abstract: The performance of computer vision models are susceptible to unexpected changes in input images, known as common corruptions (e.g. noise, blur, illumination changes, etc.), that can hinder their reliability when deployed in real scenarios. These corruptions are not always considered to test model generalization and robustness. In this survey, we present a comprehensive overview of methods that imp… ▽ More The performance of computer vision models are susceptible to unexpected changes in input images, known as common corruptions (e.g. noise, blur, illumination changes, etc.), that can hinder their reliability when deployed in real scenarios. These corruptions are not always considered to test model generalization and robustness. In this survey, we present a comprehensive overview of methods that improve the robustness of computer vision models against common corruptions. We categorize methods into four groups based on the model part and training method addressed: data augmentation, representation learning, knowledge distillation, and network components. We also cover indirect methods for generalization and mitigation of shortcut learning, potentially useful for corruption robustness. We release a unified benchmark framework to compare robustness performance on several datasets, and address the inconsistencies of evaluation in the literature. We provide an experimental overview of the base corruption robustness of popular vision backbones, and show that corruption robustness does not necessarily scale with model size. The very large models (above 100M parameters) gain negligible robustness, considering the increased computational requirements. To achieve generalizable and robust computer vision models, we foresee the need of develo** new learning strategies to efficiently exploit limited data and mitigate unwanted or unreliable learning behaviors. △ Less

Submitted 11 March, 2024; v1 submitted 10 May, 2023; originally announced May 2023.

Probabilistic neural networks for improved analyses with phenomenological models

Authors: C. H. Kim, K. Y. Chae, M. S. Smith, D. W. Bardayan, C. R. Brune, R. J. deBoer, D. Lu, D. Odell

Abstract: Physics models typically contain adjustable parameters to reproduce measured data. While some parameters correspond directly to measured features in the data, others are unobservable. These unobservables can, in some cases, cause ambiguities in the extraction of observables from measured data, or lead to questions on the physical interpretation of fits that require these extra parameters. We propo… ▽ More Physics models typically contain adjustable parameters to reproduce measured data. While some parameters correspond directly to measured features in the data, others are unobservable. These unobservables can, in some cases, cause ambiguities in the extraction of observables from measured data, or lead to questions on the physical interpretation of fits that require these extra parameters. We propose a method based on deep learning to extract values of observables directly from the data without the need for unobservables. The key to our approach is to label the training data for the deep learning model with only the observables. After training, the deep learning model can determine the values of observables from measured data with no ambiguities arising from unobservables. We demonstrate this method on the phenomenological R-matrix that is widely utilized in nuclear physics to extract resonance parameters from cross section data. Our deep learning model based on Transformers successfully predicts nuclear properties from measurements with no need for the channel radius and background pole parameters required in traditional R-matrix analyses. Details and limitations of this method, which may be useful for studies of a wide range of phenomena, are discussed. △ Less

Submitted 8 March, 2024; v1 submitted 4 May, 2023; originally announced May 2023.

Implicit Neural Representations for Modeling of Abdominal Aortic Aneurysm Progression

Authors: Dieuwertje Alblas, Marieke Hofman, Christoph Brune, Kak Khee Yeung, Jelmer M. Wolterink

Abstract: Abdominal aortic aneurysms (AAAs) are progressive dilatations of the abdominal aorta that, if left untreated, can rupture with lethal consequences. Imaging-based patient monitoring is required to select patients eligible for surgical repair. In this work, we present a model based on implicit neural representations (INRs) to model AAA progression. We represent the AAA wall over time as the zero-lev… ▽ More Abdominal aortic aneurysms (AAAs) are progressive dilatations of the abdominal aorta that, if left untreated, can rupture with lethal consequences. Imaging-based patient monitoring is required to select patients eligible for surgical repair. In this work, we present a model based on implicit neural representations (INRs) to model AAA progression. We represent the AAA wall over time as the zero-level set of a signed distance function (SDF), estimated by a multilayer perception that operates on space and time. We optimize this INR using automatically extracted segmentation masks in longitudinal CT data. This network is conditioned on spatiotemporal coordinates and represents the AAA surface at any desired resolution at any moment in time. Using regularization on spatial and temporal gradients of the SDF, we ensure proper interpolation of the AAA shape. We demonstrate the network's ability to produce AAA interpolations with average surface distances ranging between 0.72 and 2.52 mm from images acquired at highly irregular intervals. The results indicate that our model can accurately interpolate AAA shapes over time, with potential clinical value for a more personalised assessment of AAA progression. △ Less

Submitted 2 March, 2023; originally announced March 2023.

Comments: FIMH 2023 (submitted)

SE(3) symmetry lets graph neural networks learn arterial velocity estimation from small datasets

Authors: Julian Suk, Christoph Brune, Jelmer M. Wolterink

Abstract: Hemodynamic velocity fields in coronary arteries could be the basis of valuable biomarkers for diagnosis, prognosis and treatment planning in cardiovascular disease. Velocity fields are typically obtained from patient-specific 3D artery models via computational fluid dynamics (CFD). However, CFD simulation requires meticulous setup by experts and is time-intensive, which hinders large-scale accept… ▽ More Hemodynamic velocity fields in coronary arteries could be the basis of valuable biomarkers for diagnosis, prognosis and treatment planning in cardiovascular disease. Velocity fields are typically obtained from patient-specific 3D artery models via computational fluid dynamics (CFD). However, CFD simulation requires meticulous setup by experts and is time-intensive, which hinders large-scale acceptance in clinical practice. To address this, we propose graph neural networks (GNN) as an efficient black-box surrogate method to estimate 3D velocity fields mapped to the vertices of tetrahedral meshes of the artery lumen. We train these GNNs on synthetic artery models and CFD-based ground truth velocity fields. Once the GNN is trained, velocity estimates in a new and unseen artery can be obtained with 36-fold speed-up compared to CFD. We demonstrate how to construct an SE(3)-equivariant GNN that is independent of the spatial orientation of the input mesh and show how this reduces the necessary amount of training data compared to a baseline neural network. △ Less

Submitted 4 August, 2023; v1 submitted 17 February, 2023; originally announced February 2023.

Comments: First published in "12th International Conference on Functional Imaging and Modeling of the Heart" (FIMH), pp 445-454, 2023 by Springer Nature

Discovering Efficient Periodic Behaviours in Mechanical Systems via Neural Approximators

Authors: Yannik Wotte, Sven Dummer, Nicolò Botteghi, Christoph Brune, Stefano Stramigioli, Federico Califano

Abstract: It is well known that conservative mechanical systems exhibit local oscillatory behaviours due to their elastic and gravitational potentials, which completely characterise these periodic motions together with the inertial properties of the system. The classification of these periodic behaviours and their geometric characterisation are in an on-going secular debate, which recently led to the so-cal… ▽ More It is well known that conservative mechanical systems exhibit local oscillatory behaviours due to their elastic and gravitational potentials, which completely characterise these periodic motions together with the inertial properties of the system. The classification of these periodic behaviours and their geometric characterisation are in an on-going secular debate, which recently led to the so-called eigenmanifold theory. The eigenmanifold characterises nonlinear oscillations as a generalisation of linear eigenspaces. With the motivation of performing periodic tasks efficiently, we use tools coming from this theory to construct an optimization problem aimed at inducing desired closed-loop oscillations through a state feedback law. We solve the constructed optimization problem via gradient-descent methods involving neural networks. Extensive simulations show the validity of the approach. △ Less

Submitted 29 December, 2022; originally announced December 2022.

Mesh Neural Networks for SE(3)-Equivariant Hemodynamics Estimation on the Artery Wall

Authors: Julian Suk, Pim de Haan, Phillip Lippe, Christoph Brune, Jelmer M. Wolterink

Abstract: Computational fluid dynamics (CFD) is a valuable asset for patient-specific cardiovascular-disease diagnosis and prognosis, but its high computational demands hamper its adoption in practice. Machine-learning methods that estimate blood flow in individual patients could accelerate or replace CFD simulation to overcome these limitations. In this work, we consider the estimation of vector-valued qua… ▽ More Computational fluid dynamics (CFD) is a valuable asset for patient-specific cardiovascular-disease diagnosis and prognosis, but its high computational demands hamper its adoption in practice. Machine-learning methods that estimate blood flow in individual patients could accelerate or replace CFD simulation to overcome these limitations. In this work, we consider the estimation of vector-valued quantities on the wall of three-dimensional geometric artery models. We employ group equivariant graph convolution in an end-to-end SE(3)-equivariant neural network that operates directly on triangular surface meshes and makes efficient use of training data. We run experiments on a large dataset of synthetic coronary arteries and find that our method estimates directional wall shear stress (WSS) with an approximation error of 7.6% and normalised mean absolute error (NMAE) of 0.4% while up to two orders of magnitude faster than CFD. Furthermore, we show that our method is powerful enough to accurately predict transient, vector-valued WSS over the cardiac cycle while conditioned on a range of different inflow boundary conditions. These results demonstrate the potential of our proposed method as a plugin replacement for CFD in the personalised prediction of hemodynamic vector and scalar fields. △ Less

Submitted 14 June, 2024; v1 submitted 9 December, 2022; originally announced December 2022.

Comments: Published in "Computers in Biology and Medicine"

Elastic scattering of 3He+4He with SONIK

Authors: S. N. Paneru, C. R. Brune, D. Connolly, D. Odell, M. Poudel, D. R. Phillips, J. Karpesky, B. Davids, C. Ruiz, A. Lennarz, U. Greife, M. Alcorta, R. Giri, M. Lovely, M. Bowry, M. Delgado, N. E. Esker, A. Garnsworthy, C. Seeman, P. Machule, J. Fallis, A. A. Chen, F. Laddaran, A. Firmino, C. Weinerman

Abstract: Measurements of the elastic scattering cross section of 3He and 4He are important in order to improve constraints on theoretical models of 4He(3He,g)7Be, a key reaction in Big Bang nucleosynthesis and solar neutrino production. The astrophysical S-factor for this reaction is a significant source of uncertainty in the standard solar-model prediction of the 7Be and 8B solar neutrino fluxes. The elas… ▽ More Measurements of the elastic scattering cross section of 3He and 4He are important in order to improve constraints on theoretical models of 4He(3He,g)7Be, a key reaction in Big Bang nucleosynthesis and solar neutrino production. The astrophysical S-factor for this reaction is a significant source of uncertainty in the standard solar-model prediction of the 7Be and 8B solar neutrino fluxes. The elastic scattering measurements reported in the literature do not extend to low energies and lack proper uncertainty quantification. A new measurement of the 4He(3He,3He)4He reaction has been made at center-of-mass energies Ec.m. = 0.38-3.13 MeV using the Scattering of Nuclei in Inverse Kinematics (SONIK) scattering chamber: a windowless, extended gas target surrounded by an array of 30 collimated silicon charged particle detectors situated at TRIUMF. This is the first elastic scattering measurement of 3He+4He made below 500 keV and it has greater angular range and better precision than previous measurements. The elastic scattering data were analyzed using both R-matrix and Halo Effective Field Theory (Halo EFT) frameworks, and values of the s-wave scattering length and effective range were extracted. The resulting improvement in knowledge of the s-wave effective-range function at low energies will reduce the overall uncertainty in S34 at solar energies. △ Less

Submitted 26 November, 2022; originally announced November 2022.

Comments: 21 pages, 16 figures

Duality for Neural Networks through Reproducing Kernel Banach Spaces

Authors: Len Spek, Tjeerd Jan Heeringa, Felix Schwenninger, Christoph Brune

Abstract: Reproducing Kernel Hilbert spaces (RKHS) have been a very successful tool in various areas of machine learning. Recently, Barron spaces have been used to prove bounds on the generalisation error for neural networks. Unfortunately, Barron spaces cannot be understood in terms of RKHS due to the strong nonlinear coupling of the weights. This can be solved by using the more general Reproducing Kernel… ▽ More Reproducing Kernel Hilbert spaces (RKHS) have been a very successful tool in various areas of machine learning. Recently, Barron spaces have been used to prove bounds on the generalisation error for neural networks. Unfortunately, Barron spaces cannot be understood in terms of RKHS due to the strong nonlinear coupling of the weights. This can be solved by using the more general Reproducing Kernel Banach spaces (RKBS). We show that these Barron spaces belong to a class of integral RKBS. This class can also be understood as an infinite union of RKHS spaces. Furthermore, we show that the dual space of such RKBSs, is again an RKBS where the roles of the data and parameters are interchanged, forming an adjoint pair of RKBSs including a reproducing kernel. This allows us to construct the saddle point problem for neural networks, which can be used in the whole field of primal-dual optimisation. △ Less

Submitted 10 March, 2023; v1 submitted 9 November, 2022; originally announced November 2022.

First inverse kinematics measurement of resonances in $^7$Be($α,γ$)$^{11}$C relevant to neutrino-driven wind nucleosynthesis using DRAGON

Authors: A. Psaltis, A. A. Chen, R. Longland, D. S. Connolly, C. R. Brune, B. Davids, J. Fallis, R. Giri, U Greife, D. A. Hutcheon, L. Kroll, A. Lennarz, J. Liang, M. Lovely, M. Luo, C. Marshall, S. N. Paneru, A. Parikh, C. Ruiz, A. C. Shotter, M. Williams

Abstract: A possible mechanism to explain the origin of the light $p$-nuclei in the Galaxy is the nucleosynthesis in the proton-rich neutrino-driven wind ejecta of core-collapse supernovae via the $νp$-process. However this production scenario is very sensitive to the underlying supernova dynamics and the nuclear physics input. As far as the nuclear uncertainties are concerned, the breakout from the $pp$-ch… ▽ More A possible mechanism to explain the origin of the light $p$-nuclei in the Galaxy is the nucleosynthesis in the proton-rich neutrino-driven wind ejecta of core-collapse supernovae via the $νp$-process. However this production scenario is very sensitive to the underlying supernova dynamics and the nuclear physics input. As far as the nuclear uncertainties are concerned, the breakout from the $pp$-chains via the $^7$Be($α,γ$)$^{11}$C reaction has been identified as an important link which can influence the nuclear flow and therefore the efficiency of the $νp$-process. However its reaction rate is poorly known over the relevant temperature range, T = 1.5-3 GK. We report on the first direct measurement of two resonances of the $^7$Be($α,γ$)$^{11}$C reaction with previously unknown strengths using an intense radioactive $^7$Be beam from the ISAC facility and the DRAGON recoil separator in inverse kinematics. We have decreased the $^7$Be($α,γ$)$^{11}$C reaction rate uncertainty to $\sim$ 9.4-10.7% over the relevant temperature region. △ Less

Submitted 14 September, 2022; originally announced September 2022.

Comments: 15 pages, 12 figures. Accepted for publication in Phys. Rev. C

Direct measurement of resonances in $^7$Be($α,γ$)$^{11}$C relevant to $νp$-process nucleosynthesis

Authors: A. Psaltis, A. A. Chen, R. Longland, D. S. Connolly, C. R. Brune, B. Davids, J. Fallis, R. Giri, U Greife, D. A. Hutcheon, L. Kroll, A. Lennarz, J. Liang, M. Lovely, M. Luo, C. Marshall, S. N. Paneru, A. Parikh, C. Ruiz, A. C. Shotter, M. Williams

Abstract: We have performed the first direct measurement of two resonances of the $^7$Be($α,γ$)$^{11}$C reaction with unknown strengths using an intense radioactive $^7$Be beam and the DRAGON recoil separator. We report on the first measurement of the 1155 and 1110 keV resonance strengths of $1.73 \pm 0.25(stat.) \pm 0.40(syst.)$ eV and $125 ^{+27}_{-25}(stat.) \pm 15(syst.)$ meV, respectively. The present… ▽ More We have performed the first direct measurement of two resonances of the $^7$Be($α,γ$)$^{11}$C reaction with unknown strengths using an intense radioactive $^7$Be beam and the DRAGON recoil separator. We report on the first measurement of the 1155 and 1110 keV resonance strengths of $1.73 \pm 0.25(stat.) \pm 0.40(syst.)$ eV and $125 ^{+27}_{-25}(stat.) \pm 15(syst.)$ meV, respectively. The present results have reduced the uncertainty in the $^7$Be($α,γ$)$^{11}$C reaction rate to $\sim$ 9.4-10.7% over T = 1.5-3 GK, which is relevant for nucleosynthesis in the neutrino-driven outflows of core-collapse supernovae ($νp$-process). We find no effect of the new, constrained reaction rate on $νp$-process nucleosynthesis. △ Less

Submitted 14 September, 2022; originally announced September 2022.

Comments: 5 pages, 3 figures. Accepted for publication in Phys. Rev. Lett

Unsupervised Representation Learning in Deep Reinforcement Learning: A Review

Authors: Nicolò Botteghi, Mannes Poel, Christoph Brune

Abstract: This review addresses the problem of learning abstract representations of the measurement data in the context of Deep Reinforcement Learning (DRL). While the data are often ambiguous, high-dimensional, and complex to interpret, many dynamical systems can be effectively described by a low-dimensional set of state variables. Discovering these state variables from the data is a crucial aspect for (i)… ▽ More This review addresses the problem of learning abstract representations of the measurement data in the context of Deep Reinforcement Learning (DRL). While the data are often ambiguous, high-dimensional, and complex to interpret, many dynamical systems can be effectively described by a low-dimensional set of state variables. Discovering these state variables from the data is a crucial aspect for (i) improving the data efficiency, robustness, and generalization of DRL methods, (ii) tackling the curse of dimensionality, and (iii) bringing interpretability and insights into black-box DRL. This review provides a comprehensive and complete overview of unsupervised representation learning in DRL by describing the main Deep Learning tools used for learning representations of the world, providing a systematic view of the method and principles, summarizing applications, benchmarks and evaluation strategies, and discussing open challenges and future directions. △ Less

Submitted 1 May, 2024; v1 submitted 27 August, 2022; originally announced August 2022.

Deep Kernel Learning of Dynamical Models from High-Dimensional Noisy Data

Authors: Nicolò Botteghi, Mengwu Guo, Christoph Brune

Abstract: This work proposes a Stochastic Variational Deep Kernel Learning method for the data-driven discovery of low-dimensional dynamical models from high-dimensional noisy data. The framework is composed of an encoder that compresses high-dimensional measurements into low-dimensional state variables, and a latent dynamical model for the state variables that predicts the system evolution over time. The t… ▽ More This work proposes a Stochastic Variational Deep Kernel Learning method for the data-driven discovery of low-dimensional dynamical models from high-dimensional noisy data. The framework is composed of an encoder that compresses high-dimensional measurements into low-dimensional state variables, and a latent dynamical model for the state variables that predicts the system evolution over time. The training of the proposed model is carried out in an unsupervised manner, i.e., not relying on labeled data. Our learning method is evaluated on the motion of a pendulum -- a well studied baseline for nonlinear model identification and control with continuous states and control inputs -- measured via high-dimensional noisy RGB images. Results show that the method can effectively denoise measurements, learn compact state representations and latent dynamical models, as well as identify and quantify modeling uncertainties. △ Less

Submitted 25 November, 2022; v1 submitted 27 August, 2022; originally announced August 2022.

Measurements of the $^{27}{\rm Al}(α,n)$ Thick Target Yield Near Threshold

Authors: K. Brandenburg, G. Hamad, Z. Meisel, C. R. Brune, D. E. Carter, J. Derkin, D. C. Ingram, Y. Jones-Alberty, B. Kenady, T. N. Massey, M. Saxena, D. Soltesz, S. K. Subedi, J. Warren

Abstract: We present results from direct measurements of the $^{27}{\rm Al}(α,n)$ thick target yield from laboratory incident energies $E_α\approx$ 3$-$5~MeV, performed with the $^{3}$HeBF$_{3}$ Giant Barrel (HeBGB) neutron detector at the Edwards Accelerator Laboratory. Our measurements have a small energy cadence in order to address discrepancies and sparseness of thick-target yield data sets existing for… ▽ More We present results from direct measurements of the $^{27}{\rm Al}(α,n)$ thick target yield from laboratory incident energies $E_α\approx$ 3$-$5~MeV, performed with the $^{3}$HeBF$_{3}$ Giant Barrel (HeBGB) neutron detector at the Edwards Accelerator Laboratory. Our measurements have a small energy cadence in order to address discrepancies and sparseness of thick-target yield data sets existing for this energy region. We find general agreement with existing data sets, including yields derived from cross section data, while resolving a discrepancy between existing thick-target yield data sets for $E_α\approx4-5$~MeV. However, for $E_α<3.5$~MeV, our results are substantially lower than previous thick-target yield data and somewhat larger than yields calculated from existing cross section data. Our data complete the energy-range needed for estimates of the $^{27}{\rm Al}(α,n)$ contribution to neutrino and dark matter detector backgrounds and result in increased viability of $^{27}{\rm Al}(α,n)$ as a plasma diagnostic tool at fusion facilities such as the National Ignition Facility. △ Less

Submitted 25 August, 2022; originally announced August 2022.

Comments: Accepted to Nuclear Science and Engineering

Low-energy Properties of Electrons and Holes in CuFeS$_2$

Authors: Bjørnulf Brekke, Roman Malyshev, Ingeborg-Helene Svenum, Sverre M. Selbach, Thomas Tybell, Christoph Brüne, Arne Brataas

Abstract: The antiferromagnetic semiconductor CuFeS$_2$ belongs to a magnetic symmetry class that is of interest for spintronics applications. In addition, its crystal lattice is compatible with Si, making it possible to integrate it with non-magnetic semiconducting structures. Therefore, we investigate this material by finding the effective $\boldsymbol{k}\cdot\boldsymbol{p}$ Hamiltonian for the electron-… ▽ More The antiferromagnetic semiconductor CuFeS$_2$ belongs to a magnetic symmetry class that is of interest for spintronics applications. In addition, its crystal lattice is compatible with Si, making it possible to integrate it with non-magnetic semiconducting structures. Therefore, we investigate this material by finding the effective $\boldsymbol{k}\cdot\boldsymbol{p}$ Hamiltonian for the electron- and hole bands. We base this description on \textit{ab initio} calculations and classify the electronic bands by their symmetry. As a result, we find that CuFeS$_2$ exhibits spin-polarized bands and an anomalous Hall effect. Finally, we suggest using cyclotron resonance to verify our proposed effective mass tensors at the conduction band minimum and valence band maximum. △ Less

Submitted 17 August, 2022; originally announced August 2022.

Comments: 13 pages, 8 figures

Report number: QuSpin 2022

Measurements of the $^{96}$Zr($α$,n)$^{99}$Mo cross section for astrophysics and applications

Authors: Gula Hamad, Kristyn Brandenburg, Zach Meisel, Carl R. Brune, Don E. Carter, David C. Ingram, Yenuel Jones-Alberty, Thomas N. Massey, Mansi Saxena, Doug Soltesz, Shiv K. Subedi, Alexander V. Voinov

Abstract: The reaction $^{96}$Zr($α$,n)$^{99}$Mo plays an important role in $ν$-driven wind nucleosynthesis in core-collapse supernovae and is a possible avenue for medical isotope production. Cross section measurements were performed using the activation technique at the Edwards Accelerator Laboratory. Results were analyzed along with world data on the $^{96}{\rm Zr}(α,n)$ cross section and… ▽ More The reaction $^{96}$Zr($α$,n)$^{99}$Mo plays an important role in $ν$-driven wind nucleosynthesis in core-collapse supernovae and is a possible avenue for medical isotope production. Cross section measurements were performed using the activation technique at the Edwards Accelerator Laboratory. Results were analyzed along with world data on the $^{96}{\rm Zr}(α,n)$ cross section and $^{96}{\rm Zr}(α,α)$ differential cross section using large-scale Hauser-Feshbach calculations. We compare our data, previous measurements, and a statistical description of the reaction. We find a larger cross section at low energies compared to prior experimental results, allowing for a larger astrophysical reaction rate. This may impact results of core-collapse supernova $ν$-driven wind nucleosynthesis calculations, but does not significantly alter prior conclusions about $^{99}{\rm Mo}$ production for medical physics applications. The results from our large-scale Hauser-Feshbach calculations demonstrate that phenomenological optical potentials may yet be adequate to describe $(α,n)$ reactions of interest for $ν$-driven wind nucleosynthesis, albeit with regionally-adjusted model parameters. △ Less

Submitted 12 August, 2022; originally announced August 2022.

Comments: accepted to PRC

Going Off-Grid: Continuous Implicit Neural Representations for 3D Vascular Modeling

Authors: Dieuwertje Alblas, Christoph Brune, Kak Khee Yeung, Jelmer M. Wolterink

Abstract: Personalised 3D vascular models are valuable for diagnosis, prognosis and treatment planning in patients with cardiovascular disease. Traditionally, such models have been constructed with explicit representations such as meshes and voxel masks, or implicit representations such as radial basis functions or atomic (tubular) shapes. Here, we propose to represent surfaces by the zero level set of thei… ▽ More Personalised 3D vascular models are valuable for diagnosis, prognosis and treatment planning in patients with cardiovascular disease. Traditionally, such models have been constructed with explicit representations such as meshes and voxel masks, or implicit representations such as radial basis functions or atomic (tubular) shapes. Here, we propose to represent surfaces by the zero level set of their signed distance function (SDF) in a differentiable implicit neural representation (INR). This allows us to model complex vascular structures with a representation that is implicit, continuous, light-weight, and easy to integrate with deep learning algorithms. We here demonstrate the potential of this approach with three practical examples. First, we obtain an accurate and watertight surface for an abdominal aortic aneurysm (AAA) from CT images and show robust fitting from as little as 200 points on the surface. Second, we simultaneously fit nested vessel walls in a single INR without intersections. Third, we show how 3D models of individual arteries can be smoothly blended into a single watertight surface. Our results show that INRs are a flexible representation with potential for minimally interactive annotation and manipulation of complex vascular structures. △ Less

Submitted 16 September, 2022; v1 submitted 29 July, 2022; originally announced July 2022.

Comments: MICCAI STACOM 2022

Super-Resolved Microbubble Localization in Single-Channel Ultrasound RF Signals Using Deep Learning

Authors: Nathan Blanken, Jelmer M. Wolterink, Hervé Delingette, Christoph Brune, Michel Versluis, Guillaume Lajoinie

Abstract: Recently, super-resolution ultrasound imaging with ultrasound localization microscopy (ULM) has received much attention. However, ULM relies on low concentrations of microbubbles in the blood vessels, ultimately resulting in long acquisition times. Here, we present an alternative super-resolution approach, based on direct deconvolution of single-channel ultrasound radio-frequency (RF) signals with… ▽ More Recently, super-resolution ultrasound imaging with ultrasound localization microscopy (ULM) has received much attention. However, ULM relies on low concentrations of microbubbles in the blood vessels, ultimately resulting in long acquisition times. Here, we present an alternative super-resolution approach, based on direct deconvolution of single-channel ultrasound radio-frequency (RF) signals with a one-dimensional dilated convolutional neural network (CNN). This work focuses on low-frequency ultrasound (1.7 MHz) for deep imaging (10 cm) of a dense cloud of monodisperse microbubbles (up to 1000 microbubbles in the measurement volume, corresponding to an average echo overlap of 94%). Data are generated with a simulator that uses a large range of acoustic pressures (5-250 kPa) and captures the full, nonlinear response of resonant, lipid-coated microbubbles. The network is trained with a novel dual-loss function, which features elements of both a classification loss and a regression loss and improves the detection-localization characteristics of the output. Whereas imposing a localization tolerance of 0 yields poor detection metrics, imposing a localization tolerance corresponding to 4% of the wavelength yields a precision and recall of both 0.90. Furthermore, the detection improves with increasing acoustic pressure and deteriorates with increasing microbubble density. The potential of the presented approach to super-resolution ultrasound imaging is demonstrated with a delay-and-sum reconstruction with deconvolved element data. The resulting image shows an order-of-magnitude gain in axial resolution compared to a delay-and-sum reconstruction with unprocessed element data. △ Less

Submitted 9 April, 2022; originally announced April 2022.

Comments: Accepted for publication in IEEE Transactions on Medical Imaging

Performing Bayesian analyses with AZURE2 using BRICK: an application to the ${}^7$Be system

Authors: Daniel Odell, Carl R. Brune, Daniel R. Phillips, Richard James deBoer, Som Nath Paneru

Abstract: Phenomenological $R$-matrix has been a standard framework for the evaluation of resolved resonance cross section data in nuclear physics for many years. It is a powerful method for comparing different types of experimental nuclear data and combining the results of many different experimental measurements in order to gain a better estimation of the true underlying cross sections. Yet a practical ch… ▽ More Phenomenological $R$-matrix has been a standard framework for the evaluation of resolved resonance cross section data in nuclear physics for many years. It is a powerful method for comparing different types of experimental nuclear data and combining the results of many different experimental measurements in order to gain a better estimation of the true underlying cross sections. Yet a practical challenge has always been the estimation of the uncertainty on both the cross sections at the energies of interest and the fit parameters, which can take the form of standard level parameters. Frequentist ($χ^2$-based) estimation has been the norm. In this work, a Markov Chain Monte Carlo sampler, \texttt{emcee}, has been implemented for the $R$-matrix code \texttt{AZURE2}, creating the Bayesian $R$-matrix Inference Code Kit (\texttt{BRICK}). Bayesian uncertainty estimation has then been carried out for a simultaneous $R$-matrix fit of the $^3$He$(α,γ)^7$Be and $^3$He$(α,α)^3$He reactions in order to gain further insight into the fitting of capture and scattering data. Both data sets constrain the values of the bound state $α$-particle asymptotic normalization coefficients in $^7$Be. The analysis highlights the need for low-energy scattering data with well-documented uncertainty information and shows how misleading results can be obtained in its absence. △ Less

Submitted 6 October, 2023; v1 submitted 23 December, 2021; originally announced December 2021.

Deep Learning-Based Carotid Artery Vessel Wall Segmentation in Black-Blood MRI Using Anatomical Priors

Authors: Dieuwertje Alblas, Christoph Brune, Jelmer M. Wolterink

Abstract: Carotid artery vessel wall thickness measurement is an essential step in the monitoring of patients with atherosclerosis. This requires accurate segmentation of the vessel wall, i.e., the region between an artery's lumen and outer wall, in black-blood magnetic resonance (MR) images. Commonly used convolutional neural networks (CNNs) for semantic segmentation are suboptimal for this task as their u… ▽ More Carotid artery vessel wall thickness measurement is an essential step in the monitoring of patients with atherosclerosis. This requires accurate segmentation of the vessel wall, i.e., the region between an artery's lumen and outer wall, in black-blood magnetic resonance (MR) images. Commonly used convolutional neural networks (CNNs) for semantic segmentation are suboptimal for this task as their use does not guarantee a contiguous ring-shaped segmentation. Instead, in this work, we cast vessel wall segmentation as a multi-task regression problem in a polar coordinate system. For each carotid artery in each axial image slice, we aim to simultaneously find two non-intersecting nested contours that together delineate the vessel wall. CNNs applied to this problem enable an inductive bias that guarantees ring-shaped vessel walls. Moreover, we identify a problem-specific training data augmentation technique that substantially affects segmentation performance. We apply our method to segmentation of the internal and external carotid artery wall, and achieve top-ranking quantitative results in a public challenge, i.e., a median Dice similarity coefficient of 0.813 for the vessel wall and median Hausdorff distances of 0.552 mm and 0.776 mm for lumen and outer wall, respectively. Moreover, we show how the method improves over a conventional semantic segmentation approach. These results show that it is feasible to automatically obtain anatomically plausible segmentations of the carotid vessel wall with high accuracy. △ Less

Submitted 2 December, 2021; originally announced December 2021.

Comments: SPIE Medical Imaging 2022

The $^{3}$He BF$_{3}$ Giant Barrel (HeBGB) Neutron Detector

Authors: K. Brandenburg, G. Hamad, Z. Meisel, C. R. Brune, D. E. Carter, T. Danley, J. Derkin, Y. Jones-Alberty, B. Kenady, T. N. Massey, S. Paneru, M. Saxena, D. Soltesz, S. K. Subedi, J. Warren

Abstract: $(α,n)$ reactions play an important role in nuclear astrophysics and applications and are an important background source in neutrino and dark matter detectors. Measurements of total $(α,n)… ▽ More $(α,n)$ reactions play an important role in nuclear astrophysics and applications and are an important background source in neutrino and dark matter detectors. Measurements of total $(α,n)$ cross sections employing direct neutron detection often have a considerable systematic uncertainty associated with the energy-dependent neutron detection efficiency and the unknown initial neutron energy distribution. The $^{3}{\rm He}\,{\rm BF}_{3}$ Giant Barrel (HeBGB) neutron detector was built at the Edwards Accelerator Laboratory at Ohio University to overcome this challenge. HeBGB offers a near-constant neutron detection efficiency of ($7.5\pm 1.2$) \% over the neutron energy range 0.01 MeV -- 9.00 MeV, removing a significant source of systematic uncertainty present in earlier $(α,n)$ cross section measurements. △ Less

Submitted 6 April, 2022; v1 submitted 19 November, 2021; originally announced November 2021.

Mesh convolutional neural networks for wall shear stress estimation in 3D artery models

Authors: Julian Suk, Pim de Haan, Phillip Lippe, Christoph Brune, Jelmer M. Wolterink

Abstract: Computational fluid dynamics (CFD) is a valuable tool for personalised, non-invasive evaluation of hemodynamics in arteries, but its complexity and time-consuming nature prohibit large-scale use in practice. Recently, the use of deep learning for rapid estimation of CFD parameters like wall shear stress (WSS) on surface meshes has been investigated. However, existing approaches typically depend on… ▽ More Computational fluid dynamics (CFD) is a valuable tool for personalised, non-invasive evaluation of hemodynamics in arteries, but its complexity and time-consuming nature prohibit large-scale use in practice. Recently, the use of deep learning for rapid estimation of CFD parameters like wall shear stress (WSS) on surface meshes has been investigated. However, existing approaches typically depend on a hand-crafted re-parametrisation of the surface mesh to match convolutional neural network architectures. In this work, we propose to instead use mesh convolutional neural networks that directly operate on the same finite-element surface mesh as used in CFD. We train and evaluate our method on two datasets of synthetic coronary artery models with and without bifurcation, using a ground truth obtained from CFD simulation. We show that our flexible deep learning model can accurately predict 3D WSS vectors on this surface mesh. Our method processes new meshes in less than 5 [s], consistently achieves a normalised mean absolute error of $\leq$ 1.6 [%], and peaks at 90.5 [%] median approximation accuracy over the held-out test set, comparing favourably to previously published work. This demonstrates the feasibility of CFD surrogate modelling using mesh convolutional neural networks for hemodynamic parameter estimation in artery models. △ Less

Submitted 20 January, 2022; v1 submitted 10 September, 2021; originally announced September 2021.

Comments: (MICCAI 2021) Workshop on Statistical Atlases and Computational Modelling of the Heart (STACOM). The final authenticated version is available on SpringerLink

Towards Autonomous Pipeline Inspection with Hierarchical Reinforcement Learning

Authors: Nicolò Botteghi, Luuk Grefte, Mannes Poel, Beril Sirmacek, Christoph Brune, Edwin Dertien, Stefano Stramigioli

Abstract: Inspection and maintenance are two crucial aspects of industrial pipeline plants. While robotics has made tremendous progress in the mechanic design of in-pipe inspection robots, the autonomous control of such robots is still a big open challenge due to the high number of actuators and the complex manoeuvres required. To address this problem, we investigate the usage of Deep Reinforcement Learning… ▽ More Inspection and maintenance are two crucial aspects of industrial pipeline plants. While robotics has made tremendous progress in the mechanic design of in-pipe inspection robots, the autonomous control of such robots is still a big open challenge due to the high number of actuators and the complex manoeuvres required. To address this problem, we investigate the usage of Deep Reinforcement Learning for achieving autonomous navigation of in-pipe robots in pipeline networks with complex topologies. Moreover, we introduce a hierarchical policy decomposition based on Hierarchical Reinforcement Learning to learn robust high-level navigation skills. We show that the hierarchical structure introduced in the policy is fundamental for solving the navigation task through pipes and necessary for achieving navigation performances superior to human-level control. △ Less

Submitted 8 July, 2021; originally announced July 2021.

Low-Dimensional State and Action Representation Learning with MDP Homomorphism Metrics

Authors: Nicolò Botteghi, Mannes Poel, Beril Sirmacek, Christoph Brune

Abstract: Deep Reinforcement Learning has shown its ability in solving complicated problems directly from high-dimensional observations. However, in end-to-end settings, Reinforcement Learning algorithms are not sample-efficient and requires long training times and quantities of data. In this work, we proposed a framework for sample-efficient Reinforcement Learning that take advantage of state and action re… ▽ More Deep Reinforcement Learning has shown its ability in solving complicated problems directly from high-dimensional observations. However, in end-to-end settings, Reinforcement Learning algorithms are not sample-efficient and requires long training times and quantities of data. In this work, we proposed a framework for sample-efficient Reinforcement Learning that take advantage of state and action representations to transform a high-dimensional problem into a low-dimensional one. Moreover, we seek to find the optimal policy map** latent states to latent actions. Because now the policy is learned on abstract representations, we enforce, using auxiliary loss functions, the lifting of such policy to the original problem domain. Results show that the novel framework can efficiently learn low-dimensional and interpretable state and action representations and the optimal latent policy. △ Less

Submitted 4 July, 2021; originally announced July 2021.

Low Dimensional State Representation Learning with Robotics Priors in Continuous Action Spaces

Authors: Nicolò Botteghi, Khaled Alaa, Mannes Poel, Beril Sirmacek, Christoph Brune, Abeje Mersha, Stefano Stramigioli

Abstract: Autonomous robots require high degrees of cognitive and motoric intelligence to come into our everyday life. In non-structured environments and in the presence of uncertainties, such degrees of intelligence are not easy to obtain. Reinforcement learning algorithms have proven to be capable of solving complicated robotics tasks in an end-to-end fashion without any need for hand-crafted features or… ▽ More Autonomous robots require high degrees of cognitive and motoric intelligence to come into our everyday life. In non-structured environments and in the presence of uncertainties, such degrees of intelligence are not easy to obtain. Reinforcement learning algorithms have proven to be capable of solving complicated robotics tasks in an end-to-end fashion without any need for hand-crafted features or policies. Especially in the context of robotics, in which the cost of real-world data is usually extremely high, reinforcement learning solutions achieving high sample efficiency are needed. In this paper, we propose a framework combining the learning of a low-dimensional state representation, from high-dimensional observations coming from the robot's raw sensory readings, with the learning of the optimal policy, given the learned state representation. We evaluate our framework in the context of mobile robot navigation in the case of continuous state and action spaces. Moreover, we study the problem of transferring what learned in the simulated virtual environment to the real robot without further retraining using real-world data in the presence of visual and depth distractors, such as lighting changes and moving obstacles. △ Less

Submitted 4 July, 2021; originally announced July 2021.

Comments: Paper Accepted at IROS2021. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Learning normal form autoencoders for data-driven discovery of universal,parameter-dependent governing equations

Authors: Manu Kalia, Steven L. Brunton, Hil G. E. Meijer, Christoph Brune, J. Nathan Kutz

Abstract: Complex systems manifest a small number of instabilities and bifurcations that are canonical in nature, resulting in universal pattern forming characteristics as a function of some parametric dependence. Such parametric instabilities are mathematically characterized by their universal un-foldings, or normal form dynamics, whereby a parsimonious model can be used to represent the dynamics. Although… ▽ More Complex systems manifest a small number of instabilities and bifurcations that are canonical in nature, resulting in universal pattern forming characteristics as a function of some parametric dependence. Such parametric instabilities are mathematically characterized by their universal un-foldings, or normal form dynamics, whereby a parsimonious model can be used to represent the dynamics. Although center manifold theory guarantees the existence of such low-dimensional normal forms, finding them has remained a long standing challenge. In this work, we introduce deep learning autoencoders to discover coordinate transformations that capture the underlying parametric dependence of a dynamical system in terms of its canonical normal form, allowing for a simple representation of the parametric dependence and bifurcation structure. The autoencoder constrains the latent variable to adhere to a given normal form, thus allowing it to learn the appropriate coordinate transformation. We demonstrate the method on a number of example problems, showing that it can capture a diverse set of normal forms associated with Hopf, pitchfork, transcritical and/or saddle node bifurcations. This method shows how normal forms can be leveraged as canonical and universal building blocks in deep learning approaches for model discovery and reduced-order modeling. △ Less

Submitted 9 June, 2021; originally announced June 2021.

Comments: 18 pages, 7 figures

MSC Class: 37G05

How Bayesian methods can improve $R$-matrix analyses of data: the example of the $dt$ Reaction

Authors: Daniel Odell, Carl Brune, Daniel Phillips

Abstract: The $^3{\rm H}(d,n)^4{\rm He}$ reaction is of significant interest in nuclear astrophysics and nuclear applications. It is an important, early step in big-bang nucleosynthesis and a key process in nuclear fusion reactors. We use one- and two-level $R$-matrix approximations to analyze data on the cross section for this reaction at center-of-mass energies below 215 keV. We critically examine the dat… ▽ More The $^3{\rm H}(d,n)^4{\rm He}$ reaction is of significant interest in nuclear astrophysics and nuclear applications. It is an important, early step in big-bang nucleosynthesis and a key process in nuclear fusion reactors. We use one- and two-level $R$-matrix approximations to analyze data on the cross section for this reaction at center-of-mass energies below 215 keV. We critically examine the data sets using a Bayesian statistical model that allows for both common-mode and additional point-to-point uncertainties. We use Markov Chain Monte Carlo sampling to evaluate this $R$-matrix-plus-statistical model and find two-level $R$-matrix results that are stable with respect to variations in the channel radii. The $S$ factor at 40 keV evaluates to $25.36(19)$ MeV b (68% credibility interval). We discuss our Bayesian analysis in detail and provide guidance for future applications of Bayesian methods to $R$-matrix analyses. We also discuss possible paths to further reduction of the $S$-factor uncertainty. △ Less

Submitted 8 June, 2021; v1 submitted 13 May, 2021; originally announced May 2021.

Determination of the $^{60}$Zn level density from neutron evaporation spectra

Authors: D. Soltesz, M. A. A. Mamun, A. V. Voinov, Z. Meisel, B. A. Brown, C. R. Brune, S. M. Grimes, H. Hadizadeh, M. Hornish, T. N. Massey, J. E. O'Donnell, W. E. Ormand

Abstract: Nuclear reactions of interest for astrophysics and applications often rely on statistical model calculations for nuclear reaction rates, particularly for nuclei far from $β$-stability. However, statistical model parameters are often poorly constrained, where experimental constraints are particularly sparse for exotic nuclides. For example, our understanding of the breakout from the NiCu cycle in t… ▽ More Nuclear reactions of interest for astrophysics and applications often rely on statistical model calculations for nuclear reaction rates, particularly for nuclei far from $β$-stability. However, statistical model parameters are often poorly constrained, where experimental constraints are particularly sparse for exotic nuclides. For example, our understanding of the breakout from the NiCu cycle in the astrophysical rp-process is currently limited by uncertainties in the statistical properties of the proton-rich nucleus $^{60}$Zn. We have determined the nuclear level density of $^{60}$Zn using neutron evaporation spectra from $^{58}$Ni($^3$He, n) measured at the Edwards Accelerator Laboratory. We compare our results to a number of theoretical predictions, including phenomenological, microscopic, and shell model based approaches. Notably, we find the $^{60}$Zn level density is somewhat lower than expected for excitation energies populated in the $^{59}$Cu(p,$γ$)$^{60}$Zn reaction under rp-process conditions. This includes a level density plateau from roughly 5-6 MeV excitation energy, which is counter to the usual expectation of exponential growth and all theoretical predictions that we explore. A determination of the spin-distribution at the relevant excitation energies in $^{60}$Zn is needed to confirm that the Hauser-Feshbach formalism is appropriate for the $^{59}$Cu(p,$γ$)$^{60}$Zn reaction rate at X-ray burst temperatures. △ Less

Submitted 9 January, 2021; originally announced January 2021.

Comments: 10 pages, 8 figures

Journal ref: Physical Review C, 103, 015802 (2021)

International Workshop on Next Generation Gamma-Ray Source

Authors: C. R. Howell, M. W. Ahmed, A. Afanasev, D. Alesini, J. R. M. Annand, A. Aprahamian, D. L. Balabanski, S. V. Benson, A. Bernstein, C. R. Brune, J. Byrd, B. E. Carlsten, A. E. Champagne, S. Chattopadhyay, D. Davis, E. J. Downie, M. J. Durham, G. Feldman, H. Gao, C. G. R. Geddes, H. W. Griesshammer, R. Hajima, H. Hao, D. Hornidge, J. Isaak , et al. (28 additional authors not shown)

Abstract: A workshop on The Next Generation Gamma-Ray Sources sponsored by the Office of Nuclear Physics at the Department of Energy, was held November 17--19, 2016 in Bethesda, Maryland. The goals of the workshop were to identify basic and applied research opportunities at the frontiers of nuclear physics that would be made possible by the beam capabilities of an advanced laser Compton beam facility. To an… ▽ More A workshop on The Next Generation Gamma-Ray Sources sponsored by the Office of Nuclear Physics at the Department of Energy, was held November 17--19, 2016 in Bethesda, Maryland. The goals of the workshop were to identify basic and applied research opportunities at the frontiers of nuclear physics that would be made possible by the beam capabilities of an advanced laser Compton beam facility. To anchor the scientific vision to realistically achievable beam specifications using proven technologies, the workshop brought together experts in the fields of electron accelerators, lasers, and optics to examine the technical options for achieving the beam specifications required by the most compelling parts of the proposed research programs. An international assembly of participants included current and prospective $γ$-ray beam users, accelerator and light-source physicists, and federal agency program managers. Sessions were organized to foster interactions between the beam users and facility developers, allowing for information sharing and mutual feedback between the two groups. The workshop findings and recommendations are summarized in this whitepaper. △ Less

Submitted 19 December, 2020; originally announced December 2020.

Low Dimensional State Representation Learning with Reward-shaped Priors

Authors: Nicolò Botteghi, Ruben Obbink, Daan Geijs, Mannes Poel, Beril Sirmacek, Christoph Brune, Abeje Mersha, Stefano Stramigioli

Abstract: Reinforcement Learning has been able to solve many complicated robotics tasks without any need for feature engineering in an end-to-end fashion. However, learning the optimal policy directly from the sensory inputs, i.e the observations, often requires processing and storage of a huge amount of data. In the context of robotics, the cost of data from real robotics hardware is usually very high, thu… ▽ More Reinforcement Learning has been able to solve many complicated robotics tasks without any need for feature engineering in an end-to-end fashion. However, learning the optimal policy directly from the sensory inputs, i.e the observations, often requires processing and storage of a huge amount of data. In the context of robotics, the cost of data from real robotics hardware is usually very high, thus solutions that achieve high sample-efficiency are needed. We propose a method that aims at learning a map** from the observations into a lower-dimensional state space. This map** is learned with unsupervised learning using loss functions shaped to incorporate prior knowledge of the environment and the task. Using the samples from the state space, the optimal policy is quickly and efficiently learned. We test the method on several mobile robot navigation tasks in a simulation environment and also on a real robot. △ Less

Submitted 7 January, 2021; v1 submitted 29 July, 2020; originally announced July 2020.

Comments: Paper Accepted at ICPR2020

Report number: 978-1-7281-8808-9

Journal ref: Conference Proceedings 25th International Conference on Pattern Recognition (ICPR), 1, 2021, 3736-3743

Spectroscopic factors, overlaps, and isospin symmetry from an $R$-matrix point of view

Authors: Carl R. Brune

Abstract: Background: Spectroscopic factors, overlaps, and isospin symmetry are often used in conjunction with single-particle wave functions for the phenomenological analysis of nuclear structure and reactions. Many differing prescriptions for connecting these quantities to physically relevant asymptotic normalization constants or widths are available in the literature, but their relationship and degree of… ▽ More Background: Spectroscopic factors, overlaps, and isospin symmetry are often used in conjunction with single-particle wave functions for the phenomenological analysis of nuclear structure and reactions. Many differing prescriptions for connecting these quantities to physically relevant asymptotic normalization constants or widths are available in the literature, but their relationship and degree of validity are not always clear. Purpose: This paper derives relationships among the above quantities of interest using well-defined methodology and starting assumptions. Method: $R$-matrix theory is used as the primary tool to interoperate between the quantities of interest to this work. Particular attention is paid to effects arising from beyond the nuclear surface, where isospin symmetry is strongly violated. Results: Relationships among the quantities of interest are derived. Example applications of these methods to mirror levels in nucleon+${}^{12}{\rm C}$, nucleon+${}^{16}{\rm O}$, and nucleon+${}^{26}{\rm Al}$ are presented. A new approach to multi-level mirror symmetry is derived and applied to the first three $2^+$ states of ${}^{18}{\rm O}$ and ${}^{18}{\rm Ne}$. Conclusions: The relationship between the quantities of interest is clarified and certain procedures are recommended. It is found that the asymptotic normalization constant of the second $2^+$ state in ${}^{18}{\rm Ne}$ deduced from the mirror state in ${}^{18}{\rm O}$ is significantly larger than found in previous work. This finding has the effect of increasing the ${}^{17}{\rm F}(p,γ){}^{18}{\rm Ne}$ reaction rate in novae. △ Less

Submitted 2 October, 2020; v1 submitted 15 June, 2020; originally announced June 2020.

Comments: 27 pages, 10 figures

Journal ref: Phys. Rev. C 102, 034328 (2020)

Secondary $γ$-ray decays from the partial-wave $T$ matrix with an $R$-matrix application to ${}^{15}{\rm N}(p,α_1γ){}^{12}{\rm C}$

Authors: Carl R. Brune, R. James deBoer

Abstract: The secondary $γ$ rays emitted following a nuclear reaction are often relatively straightforward to detect experimentally. Despite the large volume of such data, a practical formalism for describing these $γ$ rays in terms of partial-wave $T$-matrix elements has never been given. The partial-wave formalism is applicable when $R$-matrix methods are used to describe the reaction in question. This pa… ▽ More The secondary $γ$ rays emitted following a nuclear reaction are often relatively straightforward to detect experimentally. Despite the large volume of such data, a practical formalism for describing these $γ$ rays in terms of partial-wave $T$-matrix elements has never been given. The partial-wave formalism is applicable when $R$-matrix methods are used to describe the reaction in question. This paper supplies the needed framework, and it is demonstrated by the application to the ${}^{15}{\rm N}(p,α_1γ){}^{12}{\rm C}$ reaction. △ Less

Submitted 1 September, 2020; v1 submitted 5 April, 2020; originally announced April 2020.

Comments: 7 pages, 1 figure

Journal ref: Phys. Rev. C 102, 024628 (2020)

Constraining the destruction rate of $^{40}$K in stellar nucleosynthesis through the study of the $^{40}$Ar(p,n)$^{40}$K reaction

Authors: P. Gastis, G. Perdikakis, J. Dissanayake, P. Tsintari, I. Sultana, C. R. Brune, T. N. Massey, Z. Meisel, A. V. Voinov, K. Brandenburg, T. Danley, R. Giri, Y. Jones-Alberty, S. Paneru, D. Soltesz, S. Subedi

Abstract: 40K plays a significant role in the radiogenic heating of earth-like exoplanets, which can affect the development of a habitable environment on their surfaces. The initial amount of 40K in the interior of these planets depends on the composition of the interstellar clouds from which they formed. Within this context, nuclear reactions that regulate the production of 40K during stellar evolution can… ▽ More 40K plays a significant role in the radiogenic heating of earth-like exoplanets, which can affect the development of a habitable environment on their surfaces. The initial amount of 40K in the interior of these planets depends on the composition of the interstellar clouds from which they formed. Within this context, nuclear reactions that regulate the production of 40K during stellar evolution can play a critical role. In this study, we constrain for the first time the astrophysical reaction rate of 40K(n,p)40Ar, which is responsible for the destruction of 40K during stellar nucleosynthesis. We performed differential cross-section measurements on the 40Ar(p,n)40K reaction, for six energies in the center-of-mass between 3.2 and 4.0 MeV and various angles between 0-deg and 135-deg. The experiment took place at the Edwards Accelerator Laboratory at Ohio University using the beam swinger target location and a standard neutron time-of-flight technique. The total and partial cross-sections varied with energy due to the contribution from isobaric analog states and Ericson type fluctuations. The energy-averaged neutron angular distributions were symmetrical relative to 90-deg and consistent with the theoretical predictions of the statistical model. Based on the experimental data, local transmission coefficients were extracted and were used to calculate the astrophysical reaction rates of 40Ar(p,n)40K and 40K(n,p)40Ar reactions. Our results support that the destruction rate of 40K in massive stars via the 40K(n,p)40Ar reaction is larger compared to previous estimates. This result directly affects the predicted stellar yields of 40K from nucleosynthesis, which is a critical input parameter for the galactic chemical evolution models that are currently employed for the study of significant properties of exoplanets. △ Less

Submitted 18 March, 2020; v1 submitted 30 January, 2020; originally announced January 2020.

Comments: 20 pages, 16 figures, submitted to PRC (revised manuscript after referee's review)

Journal ref: Phys. Rev. C 101, 055805 (2020)

Learned SVD: solving inverse problems via hybrid autoencoding

Authors: Yoeri E. Boink, Christoph Brune

Abstract: Our world is full of physics-driven data where effective map**s between data manifolds are desired. There is an increasing demand for understanding combined model-based and data-driven methods. We propose a nonlinear, learned singular value decomposition (L-SVD), which combines autoencoders that simultaneously learn and connect latent codes for desired signals and given measurements. We provide… ▽ More Our world is full of physics-driven data where effective map**s between data manifolds are desired. There is an increasing demand for understanding combined model-based and data-driven methods. We propose a nonlinear, learned singular value decomposition (L-SVD), which combines autoencoders that simultaneously learn and connect latent codes for desired signals and given measurements. We provide a convergence analysis for a specifically structured L-SVD that acts as a regularisation method. In a more general setting, we investigate the topic of model reduction via data dimensionality reduction to obtain a regularised inversion. We present a promising direction for solving inverse problems in cases where the underlying physics are not fully understood or have very complex behaviour. We show that the building blocks of learned inversion maps can be obtained automatically, with improved performance upon classical methods and better interpretability than black-box methods. △ Less

Submitted 29 September, 2020; v1 submitted 20 December, 2019; originally announced December 2019.

From bound states to the continuum

Authors: Calvin W. Johnson, Kristina D. Launey, Naftali Auerbach, Sonia Bacca, Bruce R. Barrett, Carl Brune, Mark A. Caprio, Pierre Descouvemont, W. H. Dickhoff, Charlotte Elster, Patrick J. Fasano, Kevin Fossez, Heiko Hergert, Morten Hjorth-Jensen, Linda Hlophe, Baishan Hu, Rodolfo M. Id Betan, Andrea Idini, Sebastian König, Konstantinos Kravvaris, Dean Lee, ** Lei, Alexis Mercenne, Rodrigo Navarro Perez, Witold Nazarewicz , et al. (13 additional authors not shown)

Abstract: This white paper reports on the discussions of the 2018 Facility for Rare Isotope Beams Theory Alliance (FRIB-TA) topical program "From bound states to the continuum: Connecting bound state calculations with scattering and reaction theory". One of the biggest and most important frontiers in nuclear theory today is to construct better and stronger bridges between bound state calculations and calcul… ▽ More This white paper reports on the discussions of the 2018 Facility for Rare Isotope Beams Theory Alliance (FRIB-TA) topical program "From bound states to the continuum: Connecting bound state calculations with scattering and reaction theory". One of the biggest and most important frontiers in nuclear theory today is to construct better and stronger bridges between bound state calculations and calculations in the continuum, especially scattering and reaction theory, as well as teasing out the influence of the continuum on states near threshold. This is particularly challenging as many-body structure calculations typically use a bound state basis, while reaction calculations more commonly utilize few-body continuum approaches. The many-body bound state and few-body continuum methods use different language and emphasize different properties. To build better foundations for these bridges, we present an overview of several bound state and continuum methods and, where possible, point to current and possible future connections. △ Less

Submitted 16 November, 2020; v1 submitted 1 December, 2019; originally announced December 2019.

Comments: 48 pages, 23 figures; paper from the FRIB Theory Alliance Workshop on "From Bound States to the Continuum", June 11-22, 2018

Journal ref: J. Phys. G: Nucl. Part. Phys. 47 123001 (2020)

A Partially Learned Algorithm for Joint Photoacoustic Reconstruction and Segmentation

Authors: Yoeri E. Boink, Srirang Manohar, Christoph Brune

Abstract: In an inhomogeneously illuminated photoacoustic image, important information like vascular geometry is not readily available when only the initial pressure is reconstructed. To obtain the desired information, algorithms for image segmentation are often applied as a post-processing step. In this work, we propose to jointly acquire the photoacoustic reconstruction and segmentation, by modifying a re… ▽ More In an inhomogeneously illuminated photoacoustic image, important information like vascular geometry is not readily available when only the initial pressure is reconstructed. To obtain the desired information, algorithms for image segmentation are often applied as a post-processing step. In this work, we propose to jointly acquire the photoacoustic reconstruction and segmentation, by modifying a recently developed partially learned algorithm based on a convolutional neural network. We investigate the stability of the algorithm against changes in initial pressures and photoacoustic system settings. These insights are used to develop an algorithm that is robust to input and system settings. Our approach can easily be applied to other imaging modalities and can be modified to perform other high-level tasks different from segmentation. The method is validated on challenging synthetic and experimental photoacoustic tomography data in limited angle and limited view scenarios. It is computationally less expensive than classical iterative methods and enables higher quality reconstructions and segmentations than state-of-the-art learned and non-learned methods. △ Less

Submitted 18 June, 2019; originally announced June 2019.

Comments: "copyright 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works."

Proximity Induced Superconductivity in CdTe-HgTe Core-Shell Nanowires

Authors: Jan Hajer, Maximilian Kessel, Christoph Brüne, Martin P. Stehno, Hartmut Buhmann, Laurens W. Molenkamp

Abstract: In this letter we report on proximity superconductivity induced in CdTe-HgTe core-shell nanowires, a quasi-one-dimensional heterostructure of the topological insulator HgTe. We demonstrate a Josephson supercurrent in our nanowires contacted with superconducting Al leads. The observation of a sizable $I_c R_n$ product, a positive excess current and multiple Andreev reflections up to fourth order fu… ▽ More In this letter we report on proximity superconductivity induced in CdTe-HgTe core-shell nanowires, a quasi-one-dimensional heterostructure of the topological insulator HgTe. We demonstrate a Josephson supercurrent in our nanowires contacted with superconducting Al leads. The observation of a sizable $I_c R_n$ product, a positive excess current and multiple Andreev reflections up to fourth order further indicate a high interface quality of the junctions. △ Less

Submitted 23 May, 2019; originally announced May 2019.

Comments: Accepted for publication in Nano Letters

$s$-wave scattering lengths for the $^7$Be+p system from an $\textit{R}$-matrix analysis

Authors: S. N. Paneru, C. R. Brune, R. Giri, R. J. Livesay, U. Greife, J. C. Blackmon, D. W. Bardayan, K. A. Chipps, B. Davids, D. S. Connolly, K. Y. Chae, A. E. Champagne, C. Deibel, K. L. Jones, M. S. Johnson, R. L. Kozub, Z. Ma, C. D. Nesaraja, S. D. Pain, F. Sarazin, J. F. Shriner Jr., D. W. Stracener, M. S. Smith, J. S. Thomas, D. W. Visser , et al. (1 additional authors not shown)

Abstract: The astrophysical $S$-factor for the radiative proton capture reaction on $^7$Be ($S_{17}$) at low energies is affected by the $s$-wave scattering lengths. We report the measurement of elastic and inelastic scattering cross sections for the $^7$Be+p system in the center-of-mass energy range 0.474 - 2.740 MeV and center-of-mass angular range of 70$^\circ$- 150$^\circ$. A radioactive $^7$Be beam pro… ▽ More The astrophysical $S$-factor for the radiative proton capture reaction on $^7$Be ($S_{17}$) at low energies is affected by the $s$-wave scattering lengths. We report the measurement of elastic and inelastic scattering cross sections for the $^7$Be+p system in the center-of-mass energy range 0.474 - 2.740 MeV and center-of-mass angular range of 70$^\circ$- 150$^\circ$. A radioactive $^7$Be beam produced at Oak Ridge National Laboratory's (ORNL) Holifield Radioactive Ion Beam Facility was accelerated and bombarded a thin polypropylene (CH$_{2}$)$_\text n$ target. Scattered ions were detected in the segmented Silicon Detector Array. Using an $\textit{R}$-matrix analysis of ORNL and Louvain-la-Neuve cross section data, the $s$-wave scattering lengths for channel spins 1 and 2 were determined to be 17.34$^{+1.11}_{-1.33}$ and -3.18$^{+0.55}_{-0.50}$ fm, respectively. The uncertainty in the $s$-wave scattering lengths reported in this work is smaller by a factor of 5-8 compared to the previous measurement, which may reduce the overall uncertainty in $S_{17}$ at zero energy. The level structure of $^8$B is discussed based upon the results from this work. Evidence for the existence of 0$^+$ and 2$^+$ levels in $^8$B at 1.9 and 2.21 MeV, respectively, is observed. △ Less

Submitted 7 May, 2019; v1 submitted 1 February, 2019; originally announced February 2019.

Journal ref: Phys. Rev. C 99, 045807 (2019)