-
First characterization of a novel grain calorimeter: the GRAiNITA prototype
Authors:
Sergey Barsuk,
Oleg Bezshyyko,
Ianina Boyarintseva,
Andrey Boyarintsev,
Dominique Breton,
Hervé Chanal,
Alexander M. Dubovik,
Andrii Kotenko,
Giulia Hull,
Jacques Lefrançois,
Stéphane Monteil,
Marie-Hélène Schune,
Nazar Semkiv,
Irina Tupitsyna,
Mykhailo Yeresko
Abstract:
A novel type of calorimeter based on grains of inorganic scintillating crystal readout by wave length shifting fibers is proposed. The concept and main features as well as the prototype design are introduced and the first results obtained using cosmic rays are presented. The number of photo-electrons generated by cosmic rays muons in the prototype detector is estimated to be of the order of 10000…
▽ More
A novel type of calorimeter based on grains of inorganic scintillating crystal readout by wave length shifting fibers is proposed. The concept and main features as well as the prototype design are introduced and the first results obtained using cosmic rays are presented. The number of photo-electrons generated by cosmic rays muons in the prototype detector is estimated to be of the order of 10000 photo-electrons per GeV, validating the concept of this next-generation shashlik calorimeter.
△ Less
Submitted 12 February, 2024; v1 submitted 12 December, 2023;
originally announced December 2023.
-
Additive manufacturing of a 3D-segmented plastic scintillator detector for tracking and calorimetry of elementary particles
Authors:
Tim Weber,
Andrey Boyarintsev,
Umut Kose,
Boato Li,
Davide Sgalaberna,
Tetiana Sibilieva,
Siddartha Berns,
Eric Boillat,
Albert De Roeck,
Till Dieminger,
Stephen Dolan,
Matthew Franks,
Boris Grynyov,
Sylvain Hugon,
Carsten Jaeschke,
André Rubbia
Abstract:
Plastic-scintillator detectors are devices used for the detection of elementary particles. They provide good particle identification with excellent time resolution, whilst being inexpensive due to the affordability of plastic materials. Particle tracking is achieved by segmenting the scintillator into smaller optically-isolated 3D granular sub-structures which require the integration of multiple t…
▽ More
Plastic-scintillator detectors are devices used for the detection of elementary particles. They provide good particle identification with excellent time resolution, whilst being inexpensive due to the affordability of plastic materials. Particle tracking is achieved by segmenting the scintillator into smaller optically-isolated 3D granular sub-structures which require the integration of multiple types of plastic materials as well as several thousands of tiny holes through a compact volume of several cubic meters. Future particle detectors necessitate larger volumes, possibly with even finer segmentation. However, manufacturing such geometries with current production strategies is challenging, as they involve time-consuming and costly fabrication processes, followed by the assembly of millions of individual parts. The difficulty in scaling up such a workflow can be addressed by additive manufacturing, enabling the construction of complex, monolithic geometries in a single operation. This article presents the fabrication of the first additive manufactured plastic scintillator detector, capable of 3D tracking elementary particles and measuring their stop** power. Its performance is comparable to the state of the art of plastic scintillator detectors. This work paves the way towards a new feasible, time and cost-effective process for the production of future plastic-based scintillator detectors, regardless their size and difficulty in geometry.
△ Less
Submitted 12 June, 2024; v1 submitted 7 December, 2023;
originally announced December 2023.
-
Additive manufacturing of inorganic scintillator-based particle detectors
Authors:
T. Sibilieva,
V. Alekseev,
S. Barsuk,
S. Berns,
E. Boillat,
I. Boiaryntseva,
A. Boyarintsev,
A. Carbone,
A. De Roeck,
S. Dolan,
T. Driuk,
A. Gendotti,
I. Gerasymov,
B. Grynyov,
S. Hugon,
U. Kose,
O. Opolonin,
A. Rubbia,
D. Sgalaberna,
N. Sibilyev,
S. Tretyak,
T. Weber,
J. Wuthrich,
X. Y. Zhao
Abstract:
Inorganic scintillators are widely used for scientific, industrial and medical applications. The development of 3D printing with inorganic scintillators would allow fast creation of detector prototypes for registration of ionizing radiation, such as alpha and beta, gamma particles in thin layers of active material and soft X-ray radiation. This article reports on the technical work and scientific…
▽ More
Inorganic scintillators are widely used for scientific, industrial and medical applications. The development of 3D printing with inorganic scintillators would allow fast creation of detector prototypes for registration of ionizing radiation, such as alpha and beta, gamma particles in thin layers of active material and soft X-ray radiation. This article reports on the technical work and scientific achievements that aimed at develo** a new inorganic scintillation filament to be used for the 3D printing of composite scintillator materials: study and definition of the scintillator composition; development of the methods for the inorganic scintillator filament production and further implementation in the available 3D printing technologies; study of impact of the different 3D printing modes on the material scintillation characteristics. Also, 3D printed scintillators can be used for creation of combined detectors for high-energy physics.
△ Less
Submitted 27 December, 2022;
originally announced December 2022.
-
Additive manufacturing of fine-granularity optically-isolated plastic scintillator elements
Authors:
S. Berns,
E. Boillat,
A. Boyarintsev,
A. De Roeck,
S. Dolan,
A. Gendotti,
B. Grynyov,
S. Hugon,
U. Kose,
S. Kovalchuk,
B. Li,
A. Rubbia,
T. Sibilieva,
D. Sgalaberna,
T. Weber,
J. Wuthrich,
X. Y. Zhao
Abstract:
Plastic scintillator detectors are used in high energy physics as well as for diagnostic imaging in medicine, beam monitoring on hadron therapy, muon tomography, dosimetry and many security applications. To combine particle tracking and calorimetry it is necessary to build detectors with three-dimensional granularity, i.e. small voxels of scintillator optically isolated from each other. Recently,…
▽ More
Plastic scintillator detectors are used in high energy physics as well as for diagnostic imaging in medicine, beam monitoring on hadron therapy, muon tomography, dosimetry and many security applications. To combine particle tracking and calorimetry it is necessary to build detectors with three-dimensional granularity, i.e. small voxels of scintillator optically isolated from each other. Recently, the 3DET collaboration demonstrated the possibility to 3D print polystyrene-based scintillators with a light output performance close to that obtained with standard production methods. In this article, after providing a further characterization of the developed scintillators, we show the first matrix of plastic scintillator cubes optically separated by a white reflector material entirely 3D printed with fused deposition modeling. This is a major milestone towards the 3D printing of the first real particle detector. A discussion of the results as well as the next steps in the R&D is also provided.
△ Less
Submitted 16 October, 2022; v1 submitted 22 February, 2022;
originally announced February 2022.
-
Demonstrating a single-block 3D-segmented plastic-scintillator detector
Authors:
A. Boyarintsev,
A. De Roeck,
S. Dolan,
A. Gendotti,
B. Grynyov,
U. Kose,
S. Kovalchuk,
T. Nepokupnaya,
A. Rubbia,
D. Sgalaberna,
T. Sibilieva,
X. Y. Zhao
Abstract:
Three-dimensional finely grained plastic scintillator detectors bring many advantages in particle detectors, allowing a massive active target which enables a high-precision tracking of interaction products, excellent calorimetry and a sub-nanosecond time resolution. Whilst such detectors can be scaled up to several-tonnes, as required by future neutrino experiments, a relatively long production ti…
▽ More
Three-dimensional finely grained plastic scintillator detectors bring many advantages in particle detectors, allowing a massive active target which enables a high-precision tracking of interaction products, excellent calorimetry and a sub-nanosecond time resolution. Whilst such detectors can be scaled up to several-tonnes, as required by future neutrino experiments, a relatively long production time, where each single plastic-scintillator element is independently manufactured and machined, together with potential challenges in the assembly, complicates their realisation. In this manuscript we propose a novel design for 3D granular scintillator detectors where O($1~\text{cm}^3$) cubes are efficiently glued in a single block of scintillator after being produced via cast polymerization, which can enable rapid and cost-efficient detector construction. This work could become particularly relevant for the detectors of the next-generation long-baseline neutrino-oscillation experiments, such as DUNE, Hyper-Kamiokande and ESSnuB.
△ Less
Submitted 27 October, 2021; v1 submitted 26 August, 2021;
originally announced August 2021.
-
A novel polystyrene-based scintillator production process involving additive manufacturing
Authors:
S. Berns,
A. Boyarintsev,
S. Hugon,
U. Kose,
D. Sgalaberna,
A. De Roeck,
A. Lebedynskiy,
T. Sibilieva,
P. Zhmurin
Abstract:
Plastic scintillator detectors are widely used in particle physics thanks to the very good particle identification, tracking capabilities and time resolution. However, new experimental challenges and the need for enhanced performance require the construction of detector geometries that are complicated using the current production techniques. In this article we propose a new production technique ba…
▽ More
Plastic scintillator detectors are widely used in particle physics thanks to the very good particle identification, tracking capabilities and time resolution. However, new experimental challenges and the need for enhanced performance require the construction of detector geometries that are complicated using the current production techniques. In this article we propose a new production technique based on additive manufacturing that aims to 3D print polystyrene-based scintillator. The production process and the results of the scintillation light output measurement of the 3D-printed scintillator are reported.
△ Less
Submitted 19 November, 2020;
originally announced November 2020.
-
Production of 82Se enriched Zinc Selenide (ZnSe) crystals for the study of neutrinoless double beta decay
Authors:
I. Dafinei,
S. Nagorny,
S. Pirro,
L. Cardani,
M. Clemenza,
F. Ferroni,
M. Laubenstein,
S. Nisi,
L. Pattavina,
K. Schaeffner,
M. L. di Vacri,
A. Boyarintsev,
I. Breslavskii,
S. Galkin,
A. Lalayants,
I. Rybalka,
V. Zvereva,
M. Enculescu
Abstract:
High purity Zinc Selenide (ZnSe) crystals are produced starting from elemental Zn and Se to be used for the search of the neutrinoless double beta decay (0νDBD) of 82Se. In order to increase the number of emitting nuclides, enriched 82Se is used. Dedicated production lines for the synthesis and conditioning of the Zn82Se powder in order to make it suitable for crystal growth were assembled complia…
▽ More
High purity Zinc Selenide (ZnSe) crystals are produced starting from elemental Zn and Se to be used for the search of the neutrinoless double beta decay (0νDBD) of 82Se. In order to increase the number of emitting nuclides, enriched 82Se is used. Dedicated production lines for the synthesis and conditioning of the Zn82Se powder in order to make it suitable for crystal growth were assembled compliant with radio-purity constraints specific to rare event physics experiments. Besides routine check of impurities concentration, high sensitivity measurements are made for radio-isotope concentrations in raw materials, reactants, consumables, ancillaries and intermediary products used for ZnSe crystals production. Indications are given on the crystals perfection and how it is achieved. Since very expensive isotopically enriched material (82Se) is used, a special attention is given for acquiring the maximum yield in the mass balance of all production stages. Production and certification protocols are presented and resulting ready-to-use Zn82Se crystals are described.
△ Less
Submitted 20 February, 2017;
originally announced February 2017.