-
CAGIRE: a wide-field NIR imager for the COLIBRI 1.3 meter robotic telescope
Authors:
Alix Nouvel de la Flèche,
Jean-Luc Atteia,
Jérémie Boy,
Alain Klotz,
Arthur Langlois,
Marie Larrieu,
Romain Mathon,
Hervé Valentin,
Philippe Ambert,
Jean-Claude Clemens,
Damien Dornic,
Eric Kajfasz,
Jean Le Graët,
Olivier Llido,
Aurélia Secroun,
Olivier Boulade,
Ayoub Bounab,
Giacomo Badano,
Olivier Gravrand,
Sébastien Aufranc,
Adrien Lamoure,
Lilian Martineau,
Laurent Rubaldo,
Hervé Geoffray,
François Gonzalez
, et al. (10 additional authors not shown)
Abstract:
The use of high energy transients such as Gamma Ray Bursts (GRBs) as probes of the distant universe relies on the close collaboration between space and ground facilities. In this context, the Sino-French mission SVOM has been designed to combine a space and a ground segment and to make the most of their synergy. On the ground, the 1.3 meter robotic telescope COLIBRI, jointly developed by France an…
▽ More
The use of high energy transients such as Gamma Ray Bursts (GRBs) as probes of the distant universe relies on the close collaboration between space and ground facilities. In this context, the Sino-French mission SVOM has been designed to combine a space and a ground segment and to make the most of their synergy. On the ground, the 1.3 meter robotic telescope COLIBRI, jointly developed by France and Mexico, will quickly point the sources detected by the space hard X-ray imager ECLAIRs, in order to detect and localise their visible/NIR counterpart and alert large telescopes in minutes. COLIBRI is equipped with two visible cameras, called DDRAGO-blue and DDRAGO-red, and an infrared camera, called CAGIRE, designed for the study of high redshift GRBs candidates. Being a low-noise NIR camera mounted at the focus of an alt-azimutal robotic telescope imposes specific requirements on CAGIRE. We describe here the main characteristics of the camera: its optical, mechanical and electronics architecture, the ALFA detector, and the operation of the camera on the telescope. The instrument description is completed by three sections presenting the calibration strategy, an image simulator incorporating known detector effects, and the automatic reduction software for the ramps acquired by the detector. This paper aims at providing an overview of the instrument before its installation on the telescope.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
In-plane gate induced transition asymmetry of spin-resolved Landau levels in InAs-based quantum wells
Authors:
Olivio Chiatti,
Johannes Boy,
Christian Heyn,
Wolfgang Hansen,
Saskia F. Fischer
Abstract:
The cross-over from quasi-two- to quasi-one-dimensional electron transport subject to transverse electric fields and perpendicular magnetic fields are studied in the diffusive to quasiballistic and zero-field to quantum Hall regime. In-plane gates and Hall-bars have been fabricated from an InGaAs/InAlAs/InAs quantum well hosting a 2DEG with carrier density of about 6.8$\times$10$^{11}$ cm$^{-2}$,…
▽ More
The cross-over from quasi-two- to quasi-one-dimensional electron transport subject to transverse electric fields and perpendicular magnetic fields are studied in the diffusive to quasiballistic and zero-field to quantum Hall regime. In-plane gates and Hall-bars have been fabricated from an InGaAs/InAlAs/InAs quantum well hosting a 2DEG with carrier density of about 6.8$\times$10$^{11}$ cm$^{-2}$, mobility of 1.8$\times$10$^5$ cm$^2$/Vs and an effective mass of 0.042$m_e$ after illumination. Magnetotransport measurements at temperatures down to 50 mK and fields up to 12 T yield a high effective Landé-factor of |g$^*$| = 16, enabling the resolution of spin-split subbands at magnetic fields of 2.5 T. In the quantum Hall regime, electrostatic control of an effective constriction width enables steering of the reflection and transmission of edge channels, allowing a separation of fully spin-polarized edge channels at filling factors $ν$ = 1 und $ν$ = 2. A change in the orientation of a transverse in-plane electric field in the constriction shifts the transition between Zeeman-split quantum Hall plateaus by $Δ$B $\approx$ 0.1 T and is consistent with an effective magnetic field of B$_{eff}$ $\approx$ 0.13 T by spin-dependent backscattering, indicating a change in the spin-split density of states.
△ Less
Submitted 7 February, 2024; v1 submitted 23 December, 2022;
originally announced December 2022.
-
GENESIS: Co-location of Geodetic Techniques in Space
Authors:
Pacôme Delva,
Zuheir Altamimi,
Alejandro Blazquez,
Mathis Blossfeld,
Johannes Böhm,
Pascal Bonnefond,
Jean-Paul Boy,
Sean Bruinsma,
Grzegorz Bury,
Miltiadis Chatzinikos,
Alexandre Couhert,
Clément Courde,
Rolf Dach,
Véronique Dehant,
Simone Dell'Agnello,
Gunnar Elgered,
Werner Enderle,
Pierre Exertier,
Susanne Glaser,
Rüdiger Haas,
Wen Huang,
Urs Hugentobler,
Adrian Jäggi,
Ozgur Karatekin,
Frank G. Lemoine
, et al. (17 additional authors not shown)
Abstract:
Improving and homogenizing time and space reference systems on Earth and, more directly, realizing the Terrestrial Reference Frame (TRF) with an accuracy of 1mm and a long-term stability of 0.1mm/year are relevant for many scientific and societal endeavors. The knowledge of the TRF is fundamental for Earth and navigation sciences. For instance, quantifying sea level change strongly depends on an a…
▽ More
Improving and homogenizing time and space reference systems on Earth and, more directly, realizing the Terrestrial Reference Frame (TRF) with an accuracy of 1mm and a long-term stability of 0.1mm/year are relevant for many scientific and societal endeavors. The knowledge of the TRF is fundamental for Earth and navigation sciences. For instance, quantifying sea level change strongly depends on an accurate determination of the geocenter motion but also of the positions of continental and island reference stations, as well as the ground stations of tracking networks. Also, numerous applications in geophysics require absolute millimeter precision from the reference frame, as for example monitoring tectonic motion or crustal deformation for predicting natural hazards. The TRF accuracy to be achieved represents the consensus of various authorities which has enunciated geodesy requirements for Earth sciences.
Today we are still far from these ambitious accuracy and stability goals for the realization of the TRF. However, a combination and co-location of all four space geodetic techniques on one satellite platform can significantly contribute to achieving these goals. This is the purpose of the GENESIS mission, proposed as a component of the FutureNAV program of the European Space Agency. The GENESIS platform will be a dynamic space geodetic observatory carrying all the geodetic instruments referenced to one another through carefully calibrated space ties. The co-location of the techniques in space will solve the inconsistencies and biases between the different geodetic techniques in order to reach the TRF accuracy and stability goals endorsed by the various international authorities and the scientific community. The purpose of this white paper is to review the state-of-the-art and explain the benefits of the GENESIS mission in Earth sciences, navigation sciences and metrology.
△ Less
Submitted 30 September, 2022;
originally announced September 2022.
-
Flux reconstruction for the NIR camera CAGIRE at the focus of the Colibrí telescope
Authors:
Alix Nouvel de la Flèche,
Jean-Luc Atteia,
Hervé Valentin,
Marie Larrieu,
Jérémie Boy,
Olivier Gravrand,
Olivier Boulade,
Jean-Claude Clemens,
Aurélia Secroun,
Eric Kajfasz,
Olivier Llido,
Stéphane Basa,
François Dolon,
Johan Floriot,
Simona Lombardo,
Adrien Lamoure,
Laurent Rubaldo,
Bruno Fieque,
Julien Roumegoux,
Hervé Geoffray,
Alan M. Watson,
William H. Lee,
Nathaniel Butler
Abstract:
CAGIRE is the near infrared camera of the Colibrí robotic telescope, designed for the follow-up of SVOM alerts. It is based on the ALFA 2k x 2k detector, from the LYNRED French Company, operating in "Up the Ramp" mode. An observation consists in a series of short (1-2 minutes) exposures during which the pixels are read out every 1.3 second, while continuously accumulating charges proportionally to…
▽ More
CAGIRE is the near infrared camera of the Colibrí robotic telescope, designed for the follow-up of SVOM alerts. It is based on the ALFA 2k x 2k detector, from the LYNRED French Company, operating in "Up the Ramp" mode. An observation consists in a series of short (1-2 minutes) exposures during which the pixels are read out every 1.3 second, while continuously accumulating charges proportionally to the received flux. We discuss here the preprocessing of CAGIRE data and a method that can be used to recover the flux received by each pixel from the slope of the ramp.
△ Less
Submitted 1 September, 2022;
originally announced September 2022.
-
Charge carrier density, mobility and Seebeck coefficient of melt-grown bulk ZnGa2O4 single crystals
Authors:
Johannes Boy,
Martin Handwerg,
Rüdiger Mitdank,
Zbigniew Galazka,
Saskia F. Fischer
Abstract:
The temperature dependence of the charge carrier density, mobility and Seebeck coefficient of melt-grown, bulk ZnGa2O4 single crystals was measured between 10 K and 310 K. The electrical conductivity at room temperature is about s = 286 S/cm due to a high electron concentration of n = 3.26*10^(19) cm^(-3), caused by unintenional do**. The mobility at room temperature is mu = 55 cm^2/Vs, whereas…
▽ More
The temperature dependence of the charge carrier density, mobility and Seebeck coefficient of melt-grown, bulk ZnGa2O4 single crystals was measured between 10 K and 310 K. The electrical conductivity at room temperature is about s = 286 S/cm due to a high electron concentration of n = 3.26*10^(19) cm^(-3), caused by unintenional do**. The mobility at room temperature is mu = 55 cm^2/Vs, whereas the scattering on ionized impurities limits the mobility to mu =62 cm^2/Vs for temperatures lower than 180 K. The Seebeck coefficient relative to aluminum at room temperature is S_(ZnGa2O4-Al) = (-125+-2) muV/K and shows a temperature dependence as expected for degenerate semiconductors. At low temperatures, around 60 K we observed a maximum of the Seebeck coefficient due to the phonon drag effect.
△ Less
Submitted 28 January, 2020;
originally announced January 2020.
-
Temperature dependence of the Seebeck coefficient of epitaxial $β$-Ga$_2$O$_3$ thin films
Authors:
Johannes Boy,
Martin Handwerg,
Robin Ahrling,
Rüdiger Mitdank,
Günter Wagner,
Zbigniew Galazka,
Saskia F. Fischer
Abstract:
The temperature dependence of the Seebeck coefficient of homoepitaxial metal organic vapor phase (MOVPE) grown, silicon doped $β$-Ga$_2$O$_3$ thin films was measured relative to aluminum. For room temperature we found the relative Seebeck coefficient of $S_{β\text{-Ga}_2\text{O}_3\text{-Al}}=(-300\pm20)\;μ$V/K. At high bath temperatures $T>240$ K, the scattering is determined by electron-phonon-in…
▽ More
The temperature dependence of the Seebeck coefficient of homoepitaxial metal organic vapor phase (MOVPE) grown, silicon doped $β$-Ga$_2$O$_3$ thin films was measured relative to aluminum. For room temperature we found the relative Seebeck coefficient of $S_{β\text{-Ga}_2\text{O}_3\text{-Al}}=(-300\pm20)\;μ$V/K. At high bath temperatures $T>240$ K, the scattering is determined by electron-phonon-interaction. At lower bath temperatures between $T=100$ K and $T=300$ K, an increase in the magnitude of the Seebeck coefficient is explained in the frame of Strattons formula. The influence of the different scattering mechanisms on the magnitude of the Seebeck coefficient is discussed and compared with Hall measurement results.
△ Less
Submitted 6 December, 2018;
originally announced December 2018.
-
Transport Properties and Finite Size Effects in $β$-Ga$_2$O$_3$ Thin Films
Authors:
Robin Ahrling,
Johannes Boy,
Martin Handwerg,
Olivio Chiatti,
Rüdiger Mitdank,
Günter Wagner,
Zbigniew Galazka,
Saskia F. Fischer
Abstract:
Thin films of the wide band gap semiconductor $β$-Ga$_2$O$_3$ have a high potential for applications in transparent electronics and high power devices. However, the role of interfaces remains to be explored. Here, we report on fundamental limits of transport properties in thin films. The conductivities, Hall densities and mobilities in thin homoepitaxially MOVPE grown \mbox{(100)-orientated $β$-Ga…
▽ More
Thin films of the wide band gap semiconductor $β$-Ga$_2$O$_3$ have a high potential for applications in transparent electronics and high power devices. However, the role of interfaces remains to be explored. Here, we report on fundamental limits of transport properties in thin films. The conductivities, Hall densities and mobilities in thin homoepitaxially MOVPE grown \mbox{(100)-orientated $β$-Ga$_2$O$_3$} films were measured as a function of temperature and film thickness. At room temperature, the electron mobilities ((115$\pm$10) $\mathrm{\frac{cm^2}{Vs}}$) in thicker films (> 150 nm) are comparable to the best of bulk. However, the mobility is strongly reduced by more than two orders of magnitude with decreasing film thickness ((5.5$\pm$0.5) $\mathrm{\frac{cm^2}{Vs}}$ for a 28 nm thin film). We find that the commonly applied classical Fuchs-Sondheimer model does not explain the contribution of electron scattering at the film surfaces sufficiently. Instead, by applying an electron wave model by Bergmann, a contribution to the mobility suppression due to the large de Broglie wavelength in $β$-Ga$_2$O$_3$ is proposed as a limiting quantum mechanical size effect.
△ Less
Submitted 27 September, 2018; v1 submitted 1 August, 2018;
originally announced August 2018.
-
The Effect of Extremist Violence on Hateful Speech Online
Authors:
Alexandra Olteanu,
Carlos Castillo,
Jeremy Boy,
Kush R. Varshney
Abstract:
User-generated content online is shaped by many factors, including endogenous elements such as platform affordances and norms, as well as exogenous elements, in particular significant events. These impact what users say, how they say it, and when they say it. In this paper, we focus on quantifying the impact of violent events on various types of hate speech, from offensive and derogatory to intimi…
▽ More
User-generated content online is shaped by many factors, including endogenous elements such as platform affordances and norms, as well as exogenous elements, in particular significant events. These impact what users say, how they say it, and when they say it. In this paper, we focus on quantifying the impact of violent events on various types of hate speech, from offensive and derogatory to intimidation and explicit calls for violence. We anchor this study in a series of attacks involving Arabs and Muslims as perpetrators or victims, occurring in Western countries, that have been covered extensively by news media. These attacks have fueled intense policy debates around immigration in various fora, including online media, which have been marred by racist prejudice and hateful speech. The focus of our research is to model the effect of the attacks on the volume and type of hateful speech on two social media platforms, Twitter and Reddit. Among other findings, we observe that extremist violence tends to lead to an increase in online hate speech, particularly on messages directly advocating violence. Our research has implications for the way in which hate speech online is monitored and suggests ways in which it could be fought.
△ Less
Submitted 16 April, 2018;
originally announced April 2018.
-
Surface atmospheric pressure excitation of the translational mode of the inner core
Authors:
Séverine Rosat,
J. -P. Boy,
Yves Rogister
Abstract:
Using hourly atmospheric surface pressure field from ECMWF (European Centre for Medium-Range Weather Forecasts) and from NCEP (National Centers for Environmental Prediction) Climate Forecast System Reanalysis (CFSR) models, we show that atmospheric pressure fluctuations excite the translational oscillation of the inner core, the so-called Slichter mode, to the sub-nanogal level at the Earth surfac…
▽ More
Using hourly atmospheric surface pressure field from ECMWF (European Centre for Medium-Range Weather Forecasts) and from NCEP (National Centers for Environmental Prediction) Climate Forecast System Reanalysis (CFSR) models, we show that atmospheric pressure fluctuations excite the translational oscillation of the inner core, the so-called Slichter mode, to the sub-nanogal level at the Earth surface. The computation is performed using a normal-mode formalism for a spherical, self-gravitating anelastic PREM-like Earth model. We determine the statistical response in the form of power spectral densities of the degree-one spherical harmonic components of the observed pressure field. Both hypotheses of inverted and non-inverted barometer for the ocean response to pressure forcing are considered. Based on previously computed noise levels, we show that the surface excitation amplitude is below the limit of detection of the superconducting gravimeters, making the Slichter mode detection a challenging instrumental task for the near future.
△ Less
Submitted 10 January, 2014;
originally announced January 2014.
-
Atmospheric pressure loading for routine data analysis
Authors:
L. Petrov,
J. -P. Boy
Abstract:
We have computed 3-D displacements induced by atmospheric pressure loading from 6-hourly surface pressure field from NCEP (National Center for Environmental Predictions) Reanalysis data for all Very Long Baseline Interferometry) and SLR (Satellite Laser Ranging) stations. We have quantitatively estimated the error budget our time series of pressure loading and found that the errors are below 15%…
▽ More
We have computed 3-D displacements induced by atmospheric pressure loading from 6-hourly surface pressure field from NCEP (National Center for Environmental Predictions) Reanalysis data for all Very Long Baseline Interferometry) and SLR (Satellite Laser Ranging) stations. We have quantitatively estimated the error budget our time series of pressure loading and found that the errors are below 15%. We validated our loading series by comparing them with a dataset of 3.5 million VLBI observations for the period of 1980--2003. We have shown that the amount of power which is present in the loading time series, but does not present in the VLBI data is, on average, only 5%. We have also succeeded, for the first time, to detect horizontal displacements caused by atmospheric loading. The correction of atmospheric loading in VLBI data allows a significant reduction of baseline repeatability, except for the annual component.
△ Less
Submitted 22 January, 2004;
originally announced January 2004.
-
Study of the atmospheric pressure loading signal in VLBI observations
Authors:
Leonid Petrov,
Jean-Paul Boy
Abstract:
Redistribution of air masses due to atmospheric circulation causes loading deformation of the Earth's crust which can be as large as 20 mm for the vertical component and 3 mm for horizontal components. Rigorous computation of site displacements caused by pressure loading requires knowledge of the surface pressure field over the entire Earth surface. A procedure for computing 3-D displacements of…
▽ More
Redistribution of air masses due to atmospheric circulation causes loading deformation of the Earth's crust which can be as large as 20 mm for the vertical component and 3 mm for horizontal components. Rigorous computation of site displacements caused by pressure loading requires knowledge of the surface pressure field over the entire Earth surface. A procedure for computing 3-D displacements of geodetic sites of interest using a 6-hourly pressure field from the NCEP numerical weather models and the Ponte and Ray [2002] model of atmospheric tides is presented. We investigated possible error sources and found that the errors of our pressure loading time series are below the 15% level. We validated our model by estimating the admittance factors of the pressure loading time series using a dataset of 3.5 million VLBI observations from 1980 to 2002. The admittance factors averaged over all sites are 0.95 -+ 0.02 for the vertical displacement and 1.00 -+ 0.07 for the horizontal displacements. For the first time horizontal displacements caused by atmospheric pressure loading have been detected. The closeness of these admittance factors to unity allows us to conclude that on average our model quantitatively agrees with the observations within the error budget of the model. At the same time we found that the model is not accurate for several stations which are near a coast or in mountain regions. We conclude that our model is suitable for routine data reduction of space geodesy observations.
△ Less
Submitted 19 November, 2003;
originally announced November 2003.
