-
Self-assembling clusters of particles on a shrinking liquid surface
Authors:
Xin Li,
Shuchen Zhang,
Mark J. Bowick,
Duanduan Wan
Abstract:
After rainfall, pine needles are observed to float on the surface of small puddles. As the water evaporates, these pine needles exhibit spontaneous self-assembly into distinct clusters. Motivated by this natural phenomenon, we conducted experimental investigations into the dynamic evolution of particles during the shrinkage of a liquid surface. Our experiments revealed that particles tend to aggre…
▽ More
After rainfall, pine needles are observed to float on the surface of small puddles. As the water evaporates, these pine needles exhibit spontaneous self-assembly into distinct clusters. Motivated by this natural phenomenon, we conducted experimental investigations into the dynamic evolution of particles during the shrinkage of a liquid surface. Our experiments revealed that particles tend to aggregate, forming distinct clusters as the liquid boundary shrinks. We systematically examined the emergence of these clusters and explored how their sizes and numbers evolve with changes in packing fraction. Furthermore, we analyze particle rotation during the process and discuss the formation of the final configuration comprising clusters of various orientations. Complementary numerical simulations demonstrate qualitative agreement with our experimental findings. Our study contributes to a better understanding of self-assembly phenomena involving macroscopic particles on shrinking liquid surfaces.
△ Less
Submitted 2 June, 2024; v1 submitted 21 May, 2024;
originally announced May 2024.
-
A bound on the free energy of tensionless membranes
Authors:
Francesco Serafin,
Mark J. Bowick
Abstract:
Using the proof of Willmore's conjecture by Marques and Neves, we conjecture that the free energy of tensionless fluid membranes of arbitrary genus has an upper bound. This implies that the average genus of such a membrane, in equilibrium, is finite, regardless of external constraints. We propose that the Gaussian rigidity may be determined by measuring the relative frequencies of large-genus conf…
▽ More
Using the proof of Willmore's conjecture by Marques and Neves, we conjecture that the free energy of tensionless fluid membranes of arbitrary genus has an upper bound. This implies that the average genus of such a membrane, in equilibrium, is finite, regardless of external constraints. We propose that the Gaussian rigidity may be determined by measuring the relative frequencies of large-genus configurations at low temperature.
△ Less
Submitted 1 August, 2023; v1 submitted 20 July, 2023;
originally announced July 2023.
-
Geometric control of tilt transition dynamics in single-clamped thermalized elastic sheets
Authors:
Roberto Abril Valenzuela,
Paul Z. Hanakata,
Mark J. Bowick
Abstract:
We study the finite-temperature dynamics of thin elastic sheets in a single-clamped cantilever configuration. This system is known to exhibit a tilt transition at which the preferred mean plane of the sheet shifts from horizontal to a plane above or below the horizontal. The resultant thermally roughened two-state (up/down) system possesses rich dynamics on multiple time scales. In the tilted regi…
▽ More
We study the finite-temperature dynamics of thin elastic sheets in a single-clamped cantilever configuration. This system is known to exhibit a tilt transition at which the preferred mean plane of the sheet shifts from horizontal to a plane above or below the horizontal. The resultant thermally roughened two-state (up/down) system possesses rich dynamics on multiple time scales. In the tilted regime, a finite energy barrier separates the spontaneously chosen up state from the inversion-symmetric down state. Molecular dynamics simulations confirm that over a sufficiently long time, such thermalized elastic sheets transition between the two states, residing in each for a finite dwell time. One might expect that temperature is the primary driver for tilt inversion. We find, instead, that the primary control parameter, at fixed tilt order parameter, is the dimensionless and purely geometrical aspect ratio of the clamped width to the total length of the otherwise-free sheet. Using a combination of an effective mean-field theory and Kramers' theory, we derive the transition rate and examine its asymptotic behavior. At length scales beyond a material-dependent thermal length scale, renormalization of the elastic constants qualitatively modifies the temperature response. In particular, the transition is suppressed by thermal fluctuations, enhancing the robustness of the tilted state. We check and supplement these findings with further molecular dynamics simulations for a range of aspect ratios and temperatures.
△ Less
Submitted 5 July, 2023;
originally announced July 2023.
-
Vibrations and tunneling of strained nanoribbons at finite temperature
Authors:
Paul Z. Hanakata,
Sourav S. Bhabesh,
David Yllanes,
David R. Nelson,
Mark J. Bowick
Abstract:
Crystalline sheets (e.g., graphene and transition metal dichalcogenides) liberated from a substrate are a paradigm for materials at criticality because flexural phonons can fluctuate into the third dimension. Although studies of static critical behaviors (e.g., the scale-dependent elastic constants) are plentiful, investigations of dynamics remain limited. Here, we use molecular dynamics to study…
▽ More
Crystalline sheets (e.g., graphene and transition metal dichalcogenides) liberated from a substrate are a paradigm for materials at criticality because flexural phonons can fluctuate into the third dimension. Although studies of static critical behaviors (e.g., the scale-dependent elastic constants) are plentiful, investigations of dynamics remain limited. Here, we use molecular dynamics to study the time dependence of the midpoint (the height center-of-mass) of doubly clamped nanoribbons, as prototypical graphene resonators, under a wide range of temperature and strain conditions. By treating the ribbon midpoint as a Brownian particle confined to a nonlinear potential (which assumes a double-well shape beyond the buckling transition), we formulate an effective theory describing the ribbon's tunneling rate across the two wells and its oscillations inside a given well. We find that, for nanoribbbons compressed above the Euler buckling point and thermalized above a temperature at which the non-linear effects due to thermal fluctuations become significant, the exponential term (the ratio between energy barrier and temperature) depends only on the geometry, but not the temperature, unlike the usual Arrhenius behavior. Moreover, we find that the natural oscillation time for small strain shows a non-trivial scaling $τ_{\rm o}\sim L_0^{\,z}T^{-η/4}$, with $L_0$ being the ribbon length, $z=2-η/2$ being the dynamic critical exponent, $η=0.8$ being the scaling exponent describing scale-dependent elastic constants, and $T$ being the temperature. These unusual scale- and temperature-dependent dynamics thus exhibit dynamic criticality and could be exploited in the development of graphene-based nanoactuators.
△ Less
Submitted 11 May, 2023;
originally announced May 2023.
-
Cell Division and Motility Enable Hexatic Order in Biological Tissues
Authors:
Yiwen Tang,
Siyuan Chen,
Mark J. Bowick,
Dapeng Bi
Abstract:
Biological tissues transform between solid-like and liquid-like states in many fundamental physiological events. Recent experimental observations further suggest that in two-dimensional epithelial tissues these solid-liquid transformations can happen via intermediate states akin to the intermediate hexatic phases observed in equilibrium two-dimensional melting. The hexatic phase is characterized b…
▽ More
Biological tissues transform between solid-like and liquid-like states in many fundamental physiological events. Recent experimental observations further suggest that in two-dimensional epithelial tissues these solid-liquid transformations can happen via intermediate states akin to the intermediate hexatic phases observed in equilibrium two-dimensional melting. The hexatic phase is characterized by quasi-long-range (power-law) orientational order but no translational order, thus endowing some structure to an otherwise structureless fluid. While it has been shown that hexatic order in tissue models can be induced by motility and thermal fluctuations, the role of cell division and apoptosis (birth and death) has remained poorly understood, despite its fundamental biological role. Here we study the effect of cell division and apoptosis on global hexatic order within the framework of the self-propelled Voronoi model of tissue. Although cell division naively destroys order and active motility facilitates deformations, we show that their combined action drives a liquid-hexatic-liquid transformation as the motility increases. The hexatic phase is accessed by the delicate balance of dislocation defect generation from cell division and the active binding of disclination-antidisclination pairs from motility. We formulate a mean-field model to elucidate this competition between cell division and motility and the consequent development of hexatic order.
△ Less
Submitted 7 November, 2023; v1 submitted 28 February, 2023;
originally announced March 2023.
-
Design rules for controlling active topological defects
Authors:
Suraj Shankar,
Luca V. D. Scharrer,
Mark J. Bowick,
M. Cristina Marchetti
Abstract:
Topological defects play a central role in the physics of many materials, including magnets, superconductors and liquid crystals. In active fluids, defects become autonomous particles that spontaneously propel from internal active stresses and drive chaotic flows stirring the fluid. The intimate connection between defect textures and active flow suggests that properties of active materials can be…
▽ More
Topological defects play a central role in the physics of many materials, including magnets, superconductors and liquid crystals. In active fluids, defects become autonomous particles that spontaneously propel from internal active stresses and drive chaotic flows stirring the fluid. The intimate connection between defect textures and active flow suggests that properties of active materials can be engineered by controlling defects, but design principles for their spatiotemporal control remain elusive. Here we propose a symmetry-based additive strategy for using elementary activity patterns, as active topological tweezers, to create, move and braid such defects. By combining theory and simulations, we demonstrate how, at the collective level, spatial activity gradients act like electric fields which, when strong enough, induce an inverted topological polarization of defects, akin to a negative susceptibility dielectric. We harness this feature in a dynamic setting to collectively pattern and transport interacting active defects. Our work establishes an additive framework to sculpt flows and manipulate active defects in both space and time, paving the way to design programmable active and living materials for transport, memory and logic.
△ Less
Submitted 2 May, 2024; v1 submitted 1 December, 2022;
originally announced December 2022.
-
The role of non-affine deformations in the elastic behavior of the cellular vertex model
Authors:
Michael F. Staddon,
Arthur Hernandez,
Mark J. Bowick,
Michael Moshe,
M. Cristina Marchetti
Abstract:
The vertex model of epithelia describes the apical surface of a tissue as a tiling of polygonal cells, with a mechanical energy governed by deviations in cell shape from preferred, or target, area, $A_0$, and perimeter, $P_0$. The model exhibits a rigidity transition driven by geometric incompatibility as tuned by the target shape index, $p_0 = P_0 / \sqrt{A_0}$. For…
▽ More
The vertex model of epithelia describes the apical surface of a tissue as a tiling of polygonal cells, with a mechanical energy governed by deviations in cell shape from preferred, or target, area, $A_0$, and perimeter, $P_0$. The model exhibits a rigidity transition driven by geometric incompatibility as tuned by the target shape index, $p_0 = P_0 / \sqrt{A_0}$. For $p_0 > p_*(6) = \sqrt{8 \sqrt{3}} \approx 3.72$, with $p_*(6)$ the perimeter of a regular hexagon of unit area, a cell can simultaneously attain both the preferred area and preferred perimeter. As a result, the tissue is in a mechanically soft compatible state, with zero shear and Young's moduli. For $p_0 < p_*(6)$, it is geometrically impossible for any cell to realize the preferred area and perimeter simultaneously, and the tissue is in an incompatible rigid solid state. Using a mean-field approach, we present a complete analytical calculation of the linear elastic moduli of an ordered vertex model. We analyze a relaxation step that includes non-affine deformations, leading to a softer response than previously reported. The origin of the vanishing shear and Young's moduli in the compatible state is the presence of zero-energy deformations of cell shape. The bulk modulus exhibits a jump discontinuity at the transition and can be lower in the rigid state than in the fluid-like state. The Poisson's ratio can become negative which lowers the bulk and Young's moduli. Our work provides a unified treatment of linear elasticity for the vertex model and demonstrates that this linear response is protocol-dependent.
△ Less
Submitted 11 April, 2023; v1 submitted 30 November, 2022;
originally announced November 2022.
-
Active nematic defects in compressible and incompressible flows
Authors:
Supavit Pokawanvit,
Zhitao Chen,
Zhihong You,
Luiza Angheluta,
M. Cristina Marchetti,
Mark J. Bowick
Abstract:
We study the dynamics of active nematic films on a substrate driven by active flows with or without the incompressible constraint.Through simulations and theoretical analysis, we show that arch patterns are stable in the compressible case, whilst they become unstable under the incompressibility constraint. For compressible flows at high enough activity, stable arches organize themselves into a sme…
▽ More
We study the dynamics of active nematic films on a substrate driven by active flows with or without the incompressible constraint.Through simulations and theoretical analysis, we show that arch patterns are stable in the compressible case, whilst they become unstable under the incompressibility constraint. For compressible flows at high enough activity, stable arches organize themselves into a smectic-like pattern, which induce an associated global polar ordering of $+1/2$ nematic defects. By contrast, divergence-free flows give rise to a local nematic order of the $+1/2$ defects, consisting of anti-aligned pairs of neighboring defects, as established in previous studies.
△ Less
Submitted 28 October, 2022; v1 submitted 27 June, 2022;
originally announced June 2022.
-
Flow around topological defects in active nematic films
Authors:
Jonas Rønning,
M. Cristina Marchetti,
Mark J. Bowick,
Luiza Angheluta
Abstract:
We study the active flow around isolated defects and the self-propulsion velocity of $+1/2$ defects in an active nematic film with both viscous dissipation (with viscosity $η$) and frictional dam** $Γ$ with a substrate. The interplay between these two dissipation mechanisms is controlled by the hydrodynamic dissipation length $\ell_d=\sqrt{η/Γ}$ that screens the flows. For an isolated defect, in…
▽ More
We study the active flow around isolated defects and the self-propulsion velocity of $+1/2$ defects in an active nematic film with both viscous dissipation (with viscosity $η$) and frictional dam** $Γ$ with a substrate. The interplay between these two dissipation mechanisms is controlled by the hydrodynamic dissipation length $\ell_d=\sqrt{η/Γ}$ that screens the flows. For an isolated defect, in the absence of screening from other defects, the size of the vortical flows around the defect is controlled by the system size $R$. In the presence of friction that leads to a finite value of $\ell_d$, the vorticity field decays to zero on the lengthscales larger than $\ell_d$. We show that the self-propulsion velocity of $+1/2$ defects grows with $R$ in small systems where $R<\ell_d$, while in the infinite system limit or when $R\gg \ell_d$, it approaches a constant value determined by $\ell_d$.
△ Less
Submitted 27 January, 2022; v1 submitted 16 November, 2021;
originally announced November 2021.
-
Anomalous elasticity of cellular tissue vertex model
Authors:
Arthur Hernandez,
Michael F. Staddon,
Mark J. Bowick,
M. Cristina Marchetti,
Michael Moshe
Abstract:
Vertex Models, as used to describe cellular tissue, have an energy controlled by deviations of each cell area and perimeter from target values. The constrained nonlinear relation between area and perimeter leads to new mechanical response. Here we provide a mean-field treatment of a highly simplified model: a uniform network of regular polygons with no topological rearrangements. Since all polygon…
▽ More
Vertex Models, as used to describe cellular tissue, have an energy controlled by deviations of each cell area and perimeter from target values. The constrained nonlinear relation between area and perimeter leads to new mechanical response. Here we provide a mean-field treatment of a highly simplified model: a uniform network of regular polygons with no topological rearrangements. Since all polygons deform in the same way, we only need to analyze the ground states and the response to deformations of a single polygon (cell). The model exhibits the known transition between a fluid/compatible state, where the cell can accommodate both target area and perimeter, and a rigid/incompatible state. %The rigid solid-like state has a single gapped ground state. We calculate and measure the mechanical resistance to various deformation protocols and discover that at the onset of rigidity, where a single zero-energy ground-state exists, %We show that in the incompatible state, where a single frustrated ground-state exists, linear elasticity fails to describe the mechanical response to even infinitesimal deformations. In particular we identify a breakdown of reciprocity expressed via different moduli for compressive and tensile loads, implying non-analyticity of the energy functional. We give a pictorial representation in configuration space that reveals that the complex elastic response of the Vertex Model arises from the presence of two distinct sets of reference states (associated with target area and target perimeter).
△ Less
Submitted 20 April, 2022; v1 submitted 21 September, 2021;
originally announced September 2021.
-
Symmetry, Thermodynamics and Topology in Active Matter
Authors:
Mark J. Bowick,
Nikta Fakhri,
M. Cristina Marchetti,
Sriram Ramaswamy
Abstract:
This article summarizes some of the open questions in the field of active matter that have emerged during Active20, a nine-week program held at the Kavli Institute for Theoretical Physics (KITP) in Spring 2020. The article does not provide a review of the field, but rather a personal view of the authors, informed by contributions of all participants, on new directions in active matter research. Th…
▽ More
This article summarizes some of the open questions in the field of active matter that have emerged during Active20, a nine-week program held at the Kavli Institute for Theoretical Physics (KITP) in Spring 2020. The article does not provide a review of the field, but rather a personal view of the authors, informed by contributions of all participants, on new directions in active matter research. The topics highlighted include: the ubiquitous occurrence of spontaneous flows and active turbulence and the theoretical and experimental challenges associated with controlling and harnessing such flows; the role of motile topological defects in ordered states of active matter and their possible biological relevance; the emergence of non-reciprocal effective interactions and the role of chirality in active systems and their intriguing connections to non-Hermitian quantum mechanics; the progress towards a formulation of the thermodynamics of active systems thanks to the feedback between theory and experiments; the impact of the active matter framework on our understanding of the emergent mechanics of biological tissue. These seemingly diverse phenomena all stem from the defining property of active matter - assemblies of self-driven entities that individually break time-reversal symmetry and collectively organize in a rich variety of nonequilibrium states.
△ Less
Submitted 7 August, 2021; v1 submitted 1 July, 2021;
originally announced July 2021.
-
Spontaneous tilt of single-clamped thermal elastic sheets
Authors:
Zhitao Chen,
Duanduan Wan,
Mark J. Bowick
Abstract:
Very thin elastic sheets, even at zero temperature, exhibit nonlinear elastic response by virtue of their dominant bending modes. Their behavior is even richer at finite temperature. Here we use molecular dynamics (MD) to study the vibrations of a thermally fluctuating two-dimensional elastic sheet with one end clamped at its zero-temperature length. We uncover a tilt phase in which the sheet fluc…
▽ More
Very thin elastic sheets, even at zero temperature, exhibit nonlinear elastic response by virtue of their dominant bending modes. Their behavior is even richer at finite temperature. Here we use molecular dynamics (MD) to study the vibrations of a thermally fluctuating two-dimensional elastic sheet with one end clamped at its zero-temperature length. We uncover a tilt phase in which the sheet fluctuates about a mean plane inclined with respect to the horizontal, thus breaking reflection symmetry. We determine the phase behavior as a function of the aspect ratio of the sheet and the temperature. We show that tilt may be viewed as a type of transverse buckling instability induced by clam** coupled to thermal fluctuations and develop an analytic model that predicts the tilted and untilted regions of the phase diagram. Qualitative agreement is found with the MD simulations. Unusual response driven by control of purely geometric quantities like the aspect ratio, as opposed to external fields, offers a very rich playground for two-dimensional mechanical metamaterials.
△ Less
Submitted 29 April, 2021; v1 submitted 23 April, 2021;
originally announced April 2021.
-
Thermal buckling and symmetry breaking in thin ribbons under compression
Authors:
Paul Z. Hanakata,
Sourav S. Bhabesh,
Mark J. Bowick,
David R. Nelson,
David Yllanes
Abstract:
Understanding thin sheets, ranging from the macro to the nanoscale, can allow control of mechanical properties such as deformability. Out-of-plane buckling due to in-plane compression can be a key feature in designing new materials. While thin-plate theory can predict critical buckling thresholds for thin frames and nanoribbons at very low temperatures, a unifying framework to describe the effects…
▽ More
Understanding thin sheets, ranging from the macro to the nanoscale, can allow control of mechanical properties such as deformability. Out-of-plane buckling due to in-plane compression can be a key feature in designing new materials. While thin-plate theory can predict critical buckling thresholds for thin frames and nanoribbons at very low temperatures, a unifying framework to describe the effects of thermal fluctuations on buckling at more elevated temperatures presents subtle difficulties. We develop and test a theoretical approach that includes both an in-plane compression and an out-of-plane perturbing field to describe the mechanics of thermalised ribbons above and below the buckling transition. We show that, once the elastic constants are renormalised to take into account the ribbon's width (in units of the thermal length scale), we can map the physics onto a mean-field treatment of buckling, provided the length is short compared to a ribbon persistence length. Our theoretical predictions are checked by extensive molecular dynamics simulations of thin thermalised ribbons under axial compression.
△ Less
Submitted 11 December, 2020;
originally announced December 2020.
-
The role of fluid flow in the dynamics of active nematic defects
Authors:
Luiza Angheluta,
Zhitao Chen,
M. Cristina Marchetti,
Mark J. Bowick
Abstract:
We adapt the Halperin-Mazenko formalism to analyze two-dimensional active nematics coupled to a generic fluid flow. The governing hydrodynamic equations lead to evolution laws for nematic topological defects and their corresponding density fields. We find that $\pm 1/2$ defects are propelled by the local fluid flow and by the nematic orientation coupled with the flow shear rate. In the overdamped…
▽ More
We adapt the Halperin-Mazenko formalism to analyze two-dimensional active nematics coupled to a generic fluid flow. The governing hydrodynamic equations lead to evolution laws for nematic topological defects and their corresponding density fields. We find that $\pm 1/2$ defects are propelled by the local fluid flow and by the nematic orientation coupled with the flow shear rate. In the overdamped and compressible limit, we recover the previously obtained active self-propulsion of the +1/2 defects. Non-local hydrodynamic effects are primarily significant for incompressible flows, for which it is not possible to eliminate the fluid velocity in favor of the local defect polarization alone. For the case of two defects with opposite charge, the non-local hydrodynamic interaction is mediated by non-reciprocal pressure-gradient forces. Finally, we derive continuum equations for a defect gas coupled to an arbitrary (compressible or incompressible) fluid flow.
△ Less
Submitted 5 December, 2020;
originally announced December 2020.
-
Fluctuations can induce local nematic order and extensile stress in monolayers of motile cells
Authors:
Farzan Vafa,
Mark J. Bowick,
Boris I. Shraiman,
M. Cristina Marchetti
Abstract:
Recent experiments in various cell types have shown that two-dimensional tissues often display local nematic order, with evidence of extensile stresses manifest in the dynamics of topological defects. Using a mesoscopic model where tissue flow is generated by fluctuating traction forces coupled to the nematic order parameter, we show that the resulting tissue dynamics can spontaneously produce loc…
▽ More
Recent experiments in various cell types have shown that two-dimensional tissues often display local nematic order, with evidence of extensile stresses manifest in the dynamics of topological defects. Using a mesoscopic model where tissue flow is generated by fluctuating traction forces coupled to the nematic order parameter, we show that the resulting tissue dynamics can spontaneously produce local nematic order and an extensile internal stress. A key element of the model is the assumption that in the presence of local nematic alignment, cells preferentially crawl along the nematic axis, resulting in anisotropy of fluctuations. Our work shows that activity can drive either extensile or contractile stresses in tissue, depending on the relative strength of the contractility of the cortical cytoskeleton and tractions by cells on the extracellular matrix.
△ Less
Submitted 25 February, 2021; v1 submitted 3 November, 2020;
originally announced November 2020.
-
Topological active matter
Authors:
Suraj Shankar,
Anton Souslov,
Mark J. Bowick,
M. Cristina Marchetti,
Vincenzo Vitelli
Abstract:
Active matter encompasses different nonequilibrium systems in which individual constituents convert energy into non-conservative forces or motion at the microscale. This review provides an elementary introduction to the role of topology in active matter through experimentally relevant examples. Here, the focus lies on topological defects and topologically protected edge modes with an emphasis on t…
▽ More
Active matter encompasses different nonequilibrium systems in which individual constituents convert energy into non-conservative forces or motion at the microscale. This review provides an elementary introduction to the role of topology in active matter through experimentally relevant examples. Here, the focus lies on topological defects and topologically protected edge modes with an emphasis on the distinctive properties they acquire in active media. These paradigmatic examples represent two physically distinct classes of phenomena whose robustness can be traced to a common mathematical origin: the presence of topological invariants. These invariants are typically integer numbers that cannot be changed by continuous deformations of the relevant order parameters or physical parameters of the underlying medium. We first explain the mechanisms whereby topological defects self propel and proliferate in active nematics, leading to collective states which can be manipulated by geometry and patterning. Possible implications for active microfluidics and biological tissues are presented. We then illustrate how the propagation of waves in active fluids and solids is affected by the presence of topological invariants characterizing their dispersion relations. We discuss the relevance of these ideas for the design of robotic metamaterials and the properties of active granular and colloidal systems. Open theoretical and experimental challenges are presented as future research prospects.
△ Less
Submitted 19 July, 2021; v1 submitted 1 October, 2020;
originally announced October 2020.
-
Multi-defect Dynamics in Active Nematics
Authors:
Farzan Vafa,
Mark J. Bowick,
M. Cristina Marchetti,
Boris I. Shraiman
Abstract:
Recent experiments and numerical studies have drawn attention to the dynamics of active nematics. Two-dimensional active nematics flow spontaneously and exhibit spatiotemporal chaotic flows with proliferation of topological defects in the nematic texture. It has been proposed that the dynamics of active nematics can be understood in terms of the dynamics of interacting defects, propelled by active…
▽ More
Recent experiments and numerical studies have drawn attention to the dynamics of active nematics. Two-dimensional active nematics flow spontaneously and exhibit spatiotemporal chaotic flows with proliferation of topological defects in the nematic texture. It has been proposed that the dynamics of active nematics can be understood in terms of the dynamics of interacting defects, propelled by active stress. Previous work has derived effective equations of motion for individual defects as quasi-particles moving in the mean field generated by other defects, but an effective theory governing multi-defect dynamics has remained out of reach. In this paper, we examine the dynamics of 2D active nematics in the limit of strong order and overdamped compressible flow. The activity-induced defect dynamics is formulated as a perturbation of the manifold of quasi-static nematic textures explicitly parameterized by defect positions. This makes it possible to derive a set of coupled ordinary differential equations governing defect (and therefore texture) dynamics. Interestingly, because of the non-orthogonality of textures associated with individual defects, their motion is coupled through a position dependent ``collective mobility" matrix. In addition to the familiar active self-propulsion of the $+1/2$ defect, we obtain new collective effects of activity that can be interpreted in terms of non-central and non-reciprocal interactions between defects.
△ Less
Submitted 6 July, 2020;
originally announced July 2020.
-
Shape and size changes of adherent elastic epithelia
Authors:
Benjamin Loewe,
Francesco Serafin,
Suraj Shankar,
Mark J. Bowick,
M. Cristina Marchetti
Abstract:
Epithelial tissues play a fundamental role in various morphogenetic events during development and early embryogenesis. Although epithelial monolayers are often modeled as two-dimensional (2D) elastic surfaces, they distinguish themselves from conventional thin elastic plates in three important ways - the presence of an apical-basal polarity, spatial variability of cellular thickness, and their non…
▽ More
Epithelial tissues play a fundamental role in various morphogenetic events during development and early embryogenesis. Although epithelial monolayers are often modeled as two-dimensional (2D) elastic surfaces, they distinguish themselves from conventional thin elastic plates in three important ways - the presence of an apical-basal polarity, spatial variability of cellular thickness, and their nonequilibrium active nature. Here, we develop a minimal continuum model of a planar epithelial tissue as an active elastic material that incorporates all these features. We start from a full three-dimensional (3D)description of the tissue and derive an effective 2D model that captures, through the curvature of the apical surface, both the apical-basal asymmetry and the spatial geometry of the tissue. Crucially, variations of active stresses across the apical-basal axis lead to active torques that can drive curvature transitions. By identifying four distinct sources of activity, we find that bulk active stresses arising from actomyosin contractility and growth compete with boundary active tensions due to localized actomyosin cables and lamellipodial activity to generate the various states spanning the morphospace of a planar epithelium. Our treatment hence unifies 3D shape deformations through the coupled mechanics of apical curvature change and in-plane expansion/contraction of substrate-adhered tissues. Finally, we discuss the implications of our results for some biologically relevant processes such as tissue folding at the onset of lumen formation.
△ Less
Submitted 11 June, 2020; v1 submitted 10 February, 2020;
originally announced February 2020.
-
Folding pathways to crumpling in thermalized elastic frames
Authors:
D. Yllanes,
D. R. Nelson,
M. J. Bowick
Abstract:
The mechanical properties of thermally excited two-dimensional crystalline membranes can depend dramatically on their geometry and topology. A particularly relevant example is the effect on the crumpling transition of holes in the membrane. Here we use molecular dynamics simulations to study the case of elastic frames (sheets with a single large hole in the center) and find that the system approac…
▽ More
The mechanical properties of thermally excited two-dimensional crystalline membranes can depend dramatically on their geometry and topology. A particularly relevant example is the effect on the crumpling transition of holes in the membrane. Here we use molecular dynamics simulations to study the case of elastic frames (sheets with a single large hole in the center) and find that the system approaches the crumpled phase through a sequence of origami-like folds at decreasing length scales when temperature is increased. We use normal-normal correlation functions to quantify the temperature-dependent number of folds.
△ Less
Submitted 1 October, 2019; v1 submitted 1 July, 2019;
originally announced July 2019.
-
Non-uniform Curvature and Anisotropic Deformation Control Wrinkling Patterns on Tori
Authors:
Xiaoxiao Zhang,
Patrick T. Mather,
Mark J. Bowick,
Teng Zhang
Abstract:
We investigate wrinkling patterns in a tri-layer torus consisting of an expanding thin outer layer, an intermediate soft layer and an inner core with a tunable shear modulus, inspired by pattern formation in developmental biologies, such as follicle pattern formation during the development of chicken embryos. We show from large-scale finite element simulations that hexagonal wrinkling patterns for…
▽ More
We investigate wrinkling patterns in a tri-layer torus consisting of an expanding thin outer layer, an intermediate soft layer and an inner core with a tunable shear modulus, inspired by pattern formation in developmental biologies, such as follicle pattern formation during the development of chicken embryos. We show from large-scale finite element simulations that hexagonal wrinkling patterns form for stiff cores whereas stripe wrinkling patterns develop for soft cores. Hexagons and stripes co-exist to form hybrid patterns for cores with intermediate stiffness. The governing mechanism for the pattern transition is that the stiffness of the inner core controls the degree to which the major radius of the torus expands this has a greater effect on deformation in the long direction as compared to the short direction of the torus. This anisotropic deformation alters stress states in the outer layer which change from biaxial (preferred hexagons) to uniaxial (preferred stripes) compression as the core stiffness is reduced. As the outer layer continues to expand, stripe and hexagon patterns will evolve into Zigzag and segmented labyrinth, respectively. Stripe wrinkles are observed to initiate at the inner surface of the torus while hexagon wrinkles start from the outer surface as a result of curvature-dependent stresses in the torus. We further discuss the effects of elasticities and geometries of the torus on the wrinkling patterns.
△ Less
Submitted 13 June, 2019; v1 submitted 4 January, 2019;
originally announced January 2019.
-
Kirigami mechanics as stress relief by elastic charges
Authors:
Michael Moshe,
Edward Esposito,
Suraj Shankar,
Baris Bircan,
Itai Cohen,
David R. Nelson,
Mark J. Bowick
Abstract:
We develop a geometric approach to understand the mechanics of perforated thin elastic sheets, using the method of strain-dependent image elastic charges. This technique recognizes the buckling response of a hole under external load as a geometrically tuned mechanism of stress relief. We use a diagonally pulled square paper frame as a model system to quantitatively test and validate our approach.…
▽ More
We develop a geometric approach to understand the mechanics of perforated thin elastic sheets, using the method of strain-dependent image elastic charges. This technique recognizes the buckling response of a hole under external load as a geometrically tuned mechanism of stress relief. We use a diagonally pulled square paper frame as a model system to quantitatively test and validate our approach. Specifically, we compare nonlinear force-extension curves and global displacement fields in theory and experiment. We find a strong softening of the force response accompanied by curvature localization at the inner corners of the buckled frame. Counterintuitively, though in complete agreement with our theory, for a range of intermediate hole sizes, wider frames are found to buckle more easily than narrower ones. Upon extending these ideas to many holes, we demonstrate that interacting elastic image charges can provide a useful kirigami design principle to selectively relax stresses in elastic materials.
△ Less
Submitted 2 August, 2018;
originally announced August 2018.
-
Topology and ground state degeneracy of tetrahedral smectic vesicles
Authors:
Francesco Serafin,
Mark J. Bowick,
Sidney R. Nagel
Abstract:
Chemical design of block copolymers makes it possible to create polymer vesicles with tunable microscopic structure. Here we focus on a model of a vesicle made of smectic liquid-crystalline block copolymers at zero temperature. The vesicle assumes a faceted tetrahedral shape and the smectic layers arrange in a stack of parallel straight lines with topological defects localized at the vertices. We…
▽ More
Chemical design of block copolymers makes it possible to create polymer vesicles with tunable microscopic structure. Here we focus on a model of a vesicle made of smectic liquid-crystalline block copolymers at zero temperature. The vesicle assumes a faceted tetrahedral shape and the smectic layers arrange in a stack of parallel straight lines with topological defects localized at the vertices. We counted the number of allowed states at $T=0$. For any fixed shape, we found a two-dimensional countable degeneracy in the smectic pattern depending on the tilt angle between the smectic layers and the edge of the tetrahedral shell. For most values of the tilt angle, the smectic layers contain spiral topological defects. The system can spontaneously break chiral symmetry when the layers organize into spiral patterns, composed of a bound pair of $+1/2$ disclinations. Finally, we suggest possible applications of tetrahedral smectic vesicles in the context of functionalizing defects and the possible consequences of the spiral structures for the rigidity of the vesicle.
△ Less
Submitted 17 December, 2018; v1 submitted 16 July, 2018;
originally announced July 2018.
-
Defect unbinding in active nematics
Authors:
Suraj Shankar,
Sriram Ramaswamy,
M. Cristina Marchetti,
Mark J. Bowick
Abstract:
We formulate the statistical dynamics of topological defects in the active nematic phase, formed in two dimensions by a collection of self-driven particles on a substrate. An important consequence of the non-equilibrium drive is the spontaneous motility of strength +1/2 disclinations. Starting from the hydrodynamic equations of active nematics, we derive an interacting particle description of defe…
▽ More
We formulate the statistical dynamics of topological defects in the active nematic phase, formed in two dimensions by a collection of self-driven particles on a substrate. An important consequence of the non-equilibrium drive is the spontaneous motility of strength +1/2 disclinations. Starting from the hydrodynamic equations of active nematics, we derive an interacting particle description of defects that includes active torques. We show that activity, within perturbation theory, lowers the defect-unbinding transition temperature, determining a critical line in the temperature-activity plane that separates the quasi-long-range ordered (nematic) and disordered (isotropic) phases. Below a critical activity, defects remain bound as rotational noise decorrelates the directed dynamics of +1/2 defects, stabilizing the quasi-long-range ordered nematic state. This activity threshold vanishes at low temperature, leading to a re-entrant transition. At large enough activity, active forces always exceed thermal ones and the perturbative result fails, suggesting that in this regime activity will always disorder the system. Crucially, rotational diffusion being a two-dimensional phenomenon, defect unbinding cannot be described by a simplified one-dimensional model.
△ Less
Submitted 7 September, 2018; v1 submitted 17 April, 2018;
originally announced April 2018.
-
Nonlinear mechanics of thin frames
Authors:
Michael Moshe,
Edward Esposito,
Suraj Shankar,
Baris Bircan,
Itai Cohen,
David R. Nelson,
Mark J. Bowick
Abstract:
The dramatic effect kirigami, such as hole cutting, has on the elastic properties of thin sheets invites a study of the mechanics of thin elastic frames under an external load. Such frames can be thought of as modular elements needed to build any kirigami pattern. Here we develop the technique of elastic charges to address a variety of elastic problems involving thin sheets with perforations, focu…
▽ More
The dramatic effect kirigami, such as hole cutting, has on the elastic properties of thin sheets invites a study of the mechanics of thin elastic frames under an external load. Such frames can be thought of as modular elements needed to build any kirigami pattern. Here we develop the technique of elastic charges to address a variety of elastic problems involving thin sheets with perforations, focusing on frames with sharp corners. We find that holes generate elastic defects (partial disclinations) which act as sources of geometric incompatibility. Numerical and analytic studies are made of three different aspects of loaded frames - the deformed configuration itself, the effective mechanical properties in the form of force-extension curves and the buckling transition triggered by defects. This allows us to understand generic kirigami mechanics in terms of a set of force-dependent elastic charges with long-range interactions.
△ Less
Submitted 15 August, 2018; v1 submitted 24 January, 2018;
originally announced January 2018.
-
Geometric frustration and solid-solid transitions in model 2D tissue
Authors:
Michael Moshe,
Mark J. Bowick,
M. Cristina Marchetti
Abstract:
We study the mechanical behavior of two-dimensional cellular tissues by formulating the continuum limit of discrete vertex models based on an energy that penalizes departures from a target area $A_0$ and a target perimeter $P_0$ for the component cells of the tissue. As the dimensionless target shape index $s_0 = \frac{P_0}{\sqrt{A_0}}$ is varied, we find a transition from a soft elastic regime fo…
▽ More
We study the mechanical behavior of two-dimensional cellular tissues by formulating the continuum limit of discrete vertex models based on an energy that penalizes departures from a target area $A_0$ and a target perimeter $P_0$ for the component cells of the tissue. As the dimensionless target shape index $s_0 = \frac{P_0}{\sqrt{A_0}}$ is varied, we find a transition from a soft elastic regime for compatible target perimeter and area to a stiffer nonlinear elastic regime frustrated by geometric incompatibility. We show that the ground state in the soft regime has a family of degenerate solutions associated with zero modes for the target area and perimeter. The onset of geometric incompatibility at a critical $s_0^c$ lifts this degeneracy. The resultant energy gap leads to a nonlinear elastic response distinct from that obtained in classical elasticity models. We draw an analogy between cellular tissues and anelastic deformations in solids.
△ Less
Submitted 23 March, 2018; v1 submitted 25 August, 2017;
originally announced August 2017.
-
Thermal crumpling of perforated two-dimensional sheets
Authors:
D. Yllanes,
S. S. Bhabesh,
D. R. Nelson,
M. J. Bowick
Abstract:
Thermalized elastic membranes without distant self-avoidance are believed to undergo a crumpling transition when the microscopic bending stiffness is comparable to $kT$, the scale of thermal fluctuations. Most potential physical realizations of such membranes have a bending stiffness well in excess of experimentally achievable temperatures and are therefore unlikely ever to access the crumpling re…
▽ More
Thermalized elastic membranes without distant self-avoidance are believed to undergo a crumpling transition when the microscopic bending stiffness is comparable to $kT$, the scale of thermal fluctuations. Most potential physical realizations of such membranes have a bending stiffness well in excess of experimentally achievable temperatures and are therefore unlikely ever to access the crumpling regime. We propose a mechanism to tune the onset of the crumpling transition by altering the geometry and topology of the sheet itself. We carry out extensive molecular dynamics simulations of perforated sheets with a dense periodic array of holes and observe that the critical temperature is controlled by the total fraction of removed area, independent of the precise arrangement and size of the individual holes. The critical exponents for the perforated membrane are compatible with those of the standard crumpling transition.
△ Less
Submitted 14 November, 2017; v1 submitted 20 May, 2017;
originally announced May 2017.
-
Topological Sound and Flocking on Curved Surfaces
Authors:
Suraj Shankar,
Mark J. Bowick,
M. Cristina Marchetti
Abstract:
Active systems on curved geometries are ubiquitous in the living world. In the presence of curvature orientationally ordered polar flocks are forced to be inhomogeneous, often requiring the presence of topological defects even in the steady state due to the constraints imposed by the topology of the underlying surface. In the presence of spontaneous flow the system additionally supports long-wavel…
▽ More
Active systems on curved geometries are ubiquitous in the living world. In the presence of curvature orientationally ordered polar flocks are forced to be inhomogeneous, often requiring the presence of topological defects even in the steady state due to the constraints imposed by the topology of the underlying surface. In the presence of spontaneous flow the system additionally supports long-wavelength propagating sound modes which get gapped by the curvature of the underlying substrate. We analytically compute the steady state profile of an active polar flock on a two-sphere and a catenoid, and show that curvature and active flow together result in symmetry protected topological modes that get localized to special geodesics on the surface (the equator or the neck respectively). These modes are the analogue of edge states in electronic quantum Hall systems and provide unidirectional channels for information transport in the flock, robust against disorder and backscattering.
△ Less
Submitted 12 September, 2017; v1 submitted 18 April, 2017;
originally announced April 2017.
-
Thermal stiffening of clamped elastic ribbons
Authors:
Duanduan Wan,
David R. Nelson,
Mark J. Bowick
Abstract:
We use molecular dynamics to study the vibrations of a thermally fluctuating two-dimensional elastic membrane clamped at both ends. We directly extract the eigenmodes from resonant peaks in the frequency domain of the time-dependent height and measure the dependence of the corresponding eigenfrequencies on the microscopic bending rigidity of the membrane, taking care also of the subtle role of the…
▽ More
We use molecular dynamics to study the vibrations of a thermally fluctuating two-dimensional elastic membrane clamped at both ends. We directly extract the eigenmodes from resonant peaks in the frequency domain of the time-dependent height and measure the dependence of the corresponding eigenfrequencies on the microscopic bending rigidity of the membrane, taking care also of the subtle role of thermal contraction in generating a tension when the projected area is fixed. At finite temperatures we show that the effective (macroscopic) bending rigidity tends to a constant as the bare bending rigidity vanishes, consistent with theoretical arguments that the large-scale bending rigidity of the membrane arises from a strong thermal renormalization of the microscopic bending rigidity. Experimental realizations include covalently-bonded two-dimensional atomically thin membranes such as graphene and molybdenum disulfide or soft matter systems such as the spectrin skeleton of red blood cells or diblock copolymers.
△ Less
Submitted 6 February, 2017;
originally announced February 2017.
-
Shapes and singularities in triatic liquid crystal vesicles
Authors:
Mark J. Bowick,
Oksana V. Manyuhina,
Francesco Serafin
Abstract:
Determining the equilibrium configuration and shape of curved two-dimensional films with (generalized) liquid crystalline (LC) order is a difficult infinite dimensional problem of direct relevance to the study of generalized polymersomes, soft matter and the fascinating problem of understanding the origin and formation of shape (morphogenesis). The symmetry of the free energy of the LC film being…
▽ More
Determining the equilibrium configuration and shape of curved two-dimensional films with (generalized) liquid crystalline (LC) order is a difficult infinite dimensional problem of direct relevance to the study of generalized polymersomes, soft matter and the fascinating problem of understanding the origin and formation of shape (morphogenesis). The symmetry of the free energy of the LC film being considered and the topology of the surface to be determined often requires that the equilibrium configuration possesses singular structures in the form of topological defects such as disclinations for nematic films. The precise number and type of defect plays a fundamental role in restricting the space of possible equilibrium shapes. Flexible closed vesicles with spherical topology and nematic or smectic order, for example, inevitably possess four elementary strength $+1/2$ disclination defects positioned at the four vertices of a tetrahedral shell. Here we address the problem of determining the equilibrium shape of flexible vesicles with generalized LC order. The order parameter in these cases is an element of $S^1/Z_p$, for any positive integer $p$. We will focus on the case $p =3$, known as triatic LCs. We construct the appropriate order parameter for triatics and find the associated free energy. We then describe the structure of the elementary defects of strength $+1/3$ in flat space. Finally, we prove that sufficiently floppy triatic vesicles with the topology of the 2-sphere equilibrate to octahedral shells with strength $+1/3$ defects at each of the six vertices, independently of scale.
△ Less
Submitted 13 February, 2017; v1 submitted 19 November, 2016;
originally announced November 2016.
-
Defect driven shapes in nematic droplets: analogies with cell division
Authors:
Marco Leoni,
Oksana V. Manyuhina,
Mark J. Bowick,
M. Cristina Marchetti
Abstract:
Building on the striking similarity between the structure of the spindle during mitosis in living cells and nematic textures in confined liquid crystals, we use a continuum model of two-dimensional nematic liquid crystal droplets, to examine the physical aspects of cell division. The model investigates the interplay between bulk elasticity of the microtubule assembly, described as a nematic liquid…
▽ More
Building on the striking similarity between the structure of the spindle during mitosis in living cells and nematic textures in confined liquid crystals, we use a continuum model of two-dimensional nematic liquid crystal droplets, to examine the physical aspects of cell division. The model investigates the interplay between bulk elasticity of the microtubule assembly, described as a nematic liquid crystal, and surface elasticity of the cell cortex, modelled as a bounding flexible membrane, in controlling cell shape and division. The centrosomes at the spindle poles correspond to the cores of the topological defects required to accommodate nematic order in a closed geometry. We map out the progression of both healthy bipolar and faulty multi-polar division as a function of an effective parameter that incorporates active processes and controls centrosome separation. A robust prediction, independent of energetic considerations, is that the transition from a single cell to daughters cells occurs at critical value of this parameter. Our model additionally suggests that microtubule anchoring at the cell cortex may play an important role for successful bipolar division. This can be tested experimentally by regulating microtubule anchoring.
△ Less
Submitted 11 January, 2017; v1 submitted 15 November, 2016;
originally announced November 2016.
-
Non-Hookean statistical mechanics of clamped graphene ribbons
Authors:
Mark J. Bowick,
Andrej Kosmrlj,
David R. Nelson,
Rastko Sknepnek
Abstract:
Thermally fluctuating sheets and ribbons provide an intriguing forum in which to investigate strong violations of Hooke's Law: large distance elastic parameters are in fact not constant, but instead depend on the macroscopic dimensions. Inspired by recent experiments on free-standing graphene cantilevers, we combine the statistical mechanics of thin elastic plates and large-scale numerical simulat…
▽ More
Thermally fluctuating sheets and ribbons provide an intriguing forum in which to investigate strong violations of Hooke's Law: large distance elastic parameters are in fact not constant, but instead depend on the macroscopic dimensions. Inspired by recent experiments on free-standing graphene cantilevers, we combine the statistical mechanics of thin elastic plates and large-scale numerical simulations to investigate the thermal renormalization of the bending rigidity of graphene ribbons clamped at one end. For ribbons of dimensions $W\times L$ (with $L\geq W$), the macroscopic bending rigidity $κ_R$ determined from cantilever deformations is independent of the width when $W<\ell_\textrm{th}$, where $\ell_\textrm{th}$ is a thermal length scale, as expected. When $W>\ell_\textrm{th}$, however, this thermally renormalized bending rigidity begins to systematically increase, in agreement with the scaling theory, although in our simulations we were not quite able to reach the system sizes necessary to determine the fully developed power law dependence on $W$. When the ribbon length $L > \ell_p$, where $\ell_p$ is the $W$-dependent thermally renormalized ribbon persistence length, we observe a scaling collapse and the beginnings of large scale random walk behavior.
△ Less
Submitted 19 February, 2017; v1 submitted 15 August, 2016;
originally announced August 2016.
-
Stiffening Thermal Membranes by Cutting
Authors:
Emily Russell,
Rastko Sknepnek,
Mark J. Bowick
Abstract:
Two-dimensional crystalline membranes have recently been realized experimentally in such systems as graphene and molybdenum disulfide, sparking a resurgence in interest in their statistical properties. Thermal fluctuations can significantly affect the effective mechanical properties of properly thermalized membranes, renormalizing both bending rigidity and elastic moduli so that in particular they…
▽ More
Two-dimensional crystalline membranes have recently been realized experimentally in such systems as graphene and molybdenum disulfide, sparking a resurgence in interest in their statistical properties. Thermal fluctuations can significantly affect the effective mechanical properties of properly thermalized membranes, renormalizing both bending rigidity and elastic moduli so that in particular they become stiffer to bending than their bare bending rigidity would suggest. We use molecular dynamics simulations to examine how the mechanical behavior of thermalized two-dimensional clamped ribbons (cantilevers) depends on their precise topology and geometry. We find that a simple slit smooths roughness as measured by the variance of height fluctuations. This counterintuitive effect may be due to the counter-posed coupling of the lips of the slit to twist in the intact regions of the ribbon.
△ Less
Submitted 2 June, 2017; v1 submitted 15 December, 2015;
originally announced December 2015.
-
Planar and curved droplet networks
Authors:
Duanduan Wan,
Mark J. Bowick
Abstract:
We study how a two-dimensional square sheet of droplets evolves to the preferred triangular lattice. The rearrangement can be induced either by an impurity seed for flat sheets or by curving the sheet. We analyze the propagation of transformation fronts and the spatial reordering subsequent to the initial perturbation.
We study how a two-dimensional square sheet of droplets evolves to the preferred triangular lattice. The rearrangement can be induced either by an impurity seed for flat sheets or by curving the sheet. We analyze the propagation of transformation fronts and the spatial reordering subsequent to the initial perturbation.
△ Less
Submitted 8 January, 2016; v1 submitted 13 July, 2015;
originally announced July 2015.
-
Shape-shifting droplet networks
Authors:
T. Zhang,
Duanduan Wan,
J. M. Schwarz,
M. J. Bowick
Abstract:
We consider a three-dimensional network of aqueous droplets joined by single lipid bilayers to form a cohesive, tissue-like material. The droplets in these networks can be programmed to have distinct osmolarities so that osmotic gradients generate internal stresses via local fluid flows to cause the network to change shape. We discover, using molecular dynamics simulations, a reversible folding-un…
▽ More
We consider a three-dimensional network of aqueous droplets joined by single lipid bilayers to form a cohesive, tissue-like material. The droplets in these networks can be programmed to have distinct osmolarities so that osmotic gradients generate internal stresses via local fluid flows to cause the network to change shape. We discover, using molecular dynamics simulations, a reversible folding-unfolding process by adding an osmotic interaction with the surrounding environment which necessarily evolves dynamically as the shape of the network changes. This discovery is the next important step towards osmotic robotics in this system. We also explore analytically and numerically how the networks become faceted via buckling and how quasi-one-dimensional networks become three-dimensional.
△ Less
Submitted 11 December, 2015; v1 submitted 5 May, 2015;
originally announced May 2015.
-
Thick smectic shells
Authors:
O. V. Manyuhina,
M. J. Bowick
Abstract:
The known ground state of ultrathin smectic films confined to the surface of a sphere is described by four +1/2 defects assembled on a great circle and a director which follows geodesic lines. Using a simple perturbative approach we show that for thick smectic films on a sphere with planar anchoring this solution breaks down, distorting the smectic layers. The instability happens when the bend ela…
▽ More
The known ground state of ultrathin smectic films confined to the surface of a sphere is described by four +1/2 defects assembled on a great circle and a director which follows geodesic lines. Using a simple perturbative approach we show that for thick smectic films on a sphere with planar anchoring this solution breaks down, distorting the smectic layers. The instability happens when the bend elastic constant exceeds the anchoring strength times the radius of the inner sphere. Above this threshold, the formation of a periodic chevron-like structure, observed experimentally as well, relieves geometric frustration. We quantify the effect of thickness and curvature of smectic shells and provide insight into the wavelength of the observed texture.
△ Less
Submitted 6 April, 2015;
originally announced April 2015.
-
Viral nematics in confined geometries
Authors:
O. V. Manyuhina,
K. B. Lawlor,
M. C. Marchetti,
M. J. Bowick
Abstract:
Motivated by recent experiments on the rod-like virus bacteriophage fd, confined to circular and annular domains, we present a theoretical study of structural transitions in these geometries. Using the continuum theory of nematic liquid crystals, we examine the competition between bulk elasticity and surface anchoring, mediated by the formation of topological defects. We show analytically that bul…
▽ More
Motivated by recent experiments on the rod-like virus bacteriophage fd, confined to circular and annular domains, we present a theoretical study of structural transitions in these geometries. Using the continuum theory of nematic liquid crystals, we examine the competition between bulk elasticity and surface anchoring, mediated by the formation of topological defects. We show analytically that bulk defects are unstable with respect to defects sitting at the boundary. Moreover, in case of an annulus, whose topology does not require the presence of topological defects, under weak anchoring conditions we find that nematic textures with boundary defects are stable compared to the defect free configurations. Thus our simple approach, with no fitting parameters, suggests a possible symmetry breaking mechanism responsible for the formation of one-, two- and three-fold textures under annular confinement.
△ Less
Submitted 19 June, 2015; v1 submitted 21 March, 2015;
originally announced March 2015.
-
Forming a cube from a sphere with tetratic order
Authors:
O. V. Manyuhina,
M. J. Bowick
Abstract:
Composed of square particles, the tetratic phase is characterised by a four-fold symmetry with quasi-long-range orientational order but no translational order. We construct the elastic free energy for tetratics and find a closed form solution for 1/4-disclinations in planar geometry. Applying the same covariant formalism to a sphere we show analytically that within the one elastic constant approxi…
▽ More
Composed of square particles, the tetratic phase is characterised by a four-fold symmetry with quasi-long-range orientational order but no translational order. We construct the elastic free energy for tetratics and find a closed form solution for 1/4-disclinations in planar geometry. Applying the same covariant formalism to a sphere we show analytically that within the one elastic constant approximation eight +1/4-disclinations favor positions defining the vertices of a cube. The interplay between defect-defect interactions and bending energy results in a flattening of the sphere towards superspheroids with the symmetry of a cube.
△ Less
Submitted 26 February, 2015; v1 submitted 10 December, 2014;
originally announced December 2014.
-
Effects of scars on crystalline shell stability under external pressure
Authors:
Duanduan Wan,
Mark J. Bowick,
Rastko Sknepnek
Abstract:
We study how the stability of spherical crystalline shells under external pressure is influenced by the defect structure. In particular, we compare stability for shells with a minimal set of topologically-required defects to shells with extended defect arrays (grain boundary "scars" with non-vanishing net disclination charge). We perform Monte Carlo simulations to compare how shells with and witho…
▽ More
We study how the stability of spherical crystalline shells under external pressure is influenced by the defect structure. In particular, we compare stability for shells with a minimal set of topologically-required defects to shells with extended defect arrays (grain boundary "scars" with non-vanishing net disclination charge). We perform Monte Carlo simulations to compare how shells with and without scars deform quasi-statically under external hydrostatic pressure. We find that the critical pressure at which shells collapse is lowered for scarred configurations that break icosahedral symmetry and raised for scars that preserve icosahedral symmetry. The particular shapes which arise from breaking of an initial icosahedrally-symmetric shell depend on the Föppl-von Kármán number.
△ Less
Submitted 22 October, 2014;
originally announced October 2014.
-
Topology and Dynamics of Active Nematic Vesicles
Authors:
Felix C. Keber,
Etienne Loiseau,
Tim Sanchez,
Stephen J. DeCamp,
Luca Giomi,
Mark J. Bowick,
M. Cristina Marchetti,
Zvonimir Dogic,
Andreas R. Bausch
Abstract:
Engineering synthetic materials that mimic the remarkable complexity of living organisms is a fundamental challenge in science and technology. We study the spatiotemporal patterns that emerge when an active nematicfilm of microtubules and molecular motors is encapsulated within a shape-changing lipid vesicle. Unlike in equilibrium systems, where defects are largely static structures, in active nem…
▽ More
Engineering synthetic materials that mimic the remarkable complexity of living organisms is a fundamental challenge in science and technology. We study the spatiotemporal patterns that emerge when an active nematicfilm of microtubules and molecular motors is encapsulated within a shape-changing lipid vesicle. Unlike in equilibrium systems, where defects are largely static structures, in active nematics defects move spontaneously and can be described as self-propelled particles. The combination of activity, topological constraints and vesicle deformability produces a myriad of dynamical states. We highlight two dynamical modes: a tunable periodic state that oscillates between two defect configurations, and shape-changing vesicles with streaming filopodia-like protrusions. These results demonstrate how biomimetic materials can be obtained when topological constraints are used to control the non-equilibrium dynamics of active matter.
△ Less
Submitted 5 September, 2014;
originally announced September 2014.
-
Defect dynamics in active nematics
Authors:
Luca Giomi,
Mark J. Bowick,
Prashant Mishra,
Rastko Sknepnek,
M. Cristina Marchetti
Abstract:
Topological defects are distinctive signatures of liquid crystals. They profoundly affect the viscoelastic behavior of the fluid by constraining the orientational structure in a way that inevitably requires global changes not achievable with any set of local deformations. In active nematic liquid crystals topological defects not only dictate the global structure of the director, but also act as lo…
▽ More
Topological defects are distinctive signatures of liquid crystals. They profoundly affect the viscoelastic behavior of the fluid by constraining the orientational structure in a way that inevitably requires global changes not achievable with any set of local deformations. In active nematic liquid crystals topological defects not only dictate the global structure of the director, but also act as local sources of motion, behaving as self-propelled particles. In this article we present a detailed analytical and numerical study of the mechanics of topological defects in active nematic liquid crystals.
△ Less
Submitted 26 March, 2014; v1 submitted 20 March, 2014;
originally announced March 2014.
-
On the modeling of endocytosis in yeast
Authors:
T. Zhang,
R. Sknepnek,
M. J. Bowick,
J. M. Schwarz
Abstract:
The cell membrane deforms during endocytosis to surround extracellular material and draw it into the cell. Experiments on endocytosis in yeast all agree that (i) actin polymerizes into a network of filaments exerting active forces on the membrane to deform it and (ii) the large scale membrane deformation is tubular in shape. There are three competing proposals, in contrast, for precisely how the a…
▽ More
The cell membrane deforms during endocytosis to surround extracellular material and draw it into the cell. Experiments on endocytosis in yeast all agree that (i) actin polymerizes into a network of filaments exerting active forces on the membrane to deform it and (ii) the large scale membrane deformation is tubular in shape. There are three competing proposals, in contrast, for precisely how the actin filament network organizes itself to drive the deformation. We use variational approaches and numerical simulations to address this competition by analyzing a meso-scale model of actin-mediated endocytosis in yeast. The meso-scale model breaks up the invagination process into three stages: (i) initiation, where clathrin interacts with the membrane via adaptor proteins, (ii) elongation, where the membrane is then further deformed by polymerizing actin filaments, followed by (iii) pinch-off. Our results suggest that the pinch-off mechanism may be assisted by a pearling-like instability. We rule out two of the three competing proposals for the organization of the actin filament network during the elongation stage. These two proposals could possibly be important in the pinch-off stage, however, where additional actin polymerization helps break off the vesicle. Implications and comparisons with earlier modeling of endocytosis in yeast are discussed.
△ Less
Submitted 4 December, 2014; v1 submitted 31 October, 2013;
originally announced October 2013.
-
Fractionalization of Interstitials in Curved Colloidal Crystals
Authors:
William T. M. Irvine,
Mark J. Bowick,
Paul M. Chaikin
Abstract:
Understanding the out-of equilibrium behaviour of point defects in crystals, yields insights into the nature and fragility of the ordered state, as well as being of great practical importance. In some rare cases defects are spontaneously healed - a one-dimensional crystal formed by a line of identical charged particles, for example, can accommodate an interstitial (extra particle) by a re-adjustin…
▽ More
Understanding the out-of equilibrium behaviour of point defects in crystals, yields insights into the nature and fragility of the ordered state, as well as being of great practical importance. In some rare cases defects are spontaneously healed - a one-dimensional crystal formed by a line of identical charged particles, for example, can accommodate an interstitial (extra particle) by a re-adjusting all particle positions to even out the spacing. In sharp contrast, particles organized into a perfect hexagonal crystal in the plane cannot accommodate an interstitial by a simple re-adjustment of the particle spacing - the interstitial remains instead trapped between lattice sites and diffuses by hop**, leaving the crystal permanently defected. Here we report on the behavior of interstitials in colloidal crystals on curved surfaces. Using optical tweezers operated independently of three dimensional imaging, we insert a colloidal interstitial in a lattice of similar particles on flat and curved (positively and negatively) oil-glycerol interfaces and image the ensuing dynamics. We find that, unlike in flat space, the curved crystals self-heal through a collective rearrangement that re-distributes the increased density associated with the interstitial. The self-healing process can be interpreted in terms of an out of equilibrium interaction of topological defects with each other and with the underlying curvature. Our observations suggest the existence of "particle fractionalization" on curved surface crystals.
△ Less
Submitted 10 October, 2013;
originally announced October 2013.
-
Delaunay Surfaces
Authors:
Enrique Bendito,
Mark J. Bowick,
Agustin Medina
Abstract:
We derive parametrizations of the Delaunay constant mean curvature surfaces of revolution that follow directly from parametrizations of the conics that generate these surfaces via the corresponding roulette. This uniform treatment exploits the natural geometry of the conic (parabolic, elliptic or hyperbolic) and leads to simple expressions for the mean and Gaussian curvatures of the surfaces as we…
▽ More
We derive parametrizations of the Delaunay constant mean curvature surfaces of revolution that follow directly from parametrizations of the conics that generate these surfaces via the corresponding roulette. This uniform treatment exploits the natural geometry of the conic (parabolic, elliptic or hyperbolic) and leads to simple expressions for the mean and Gaussian curvatures of the surfaces as well as the construction of new surfaces.
△ Less
Submitted 24 May, 2013;
originally announced May 2013.
-
Crystalline Particle Packings on Constant Mean Curvature (Delaunay) Surfaces
Authors:
Enrique Bendito,
Mark J. Bowick,
Agustin Medina,
Zhenwei Yao
Abstract:
We investigate the structure of crystalline particle arrays on constant mean curvature (CMC) surfaces of revolution. Such curved crystals have been realized physically by creating charge-stabilized colloidal arrays on liquid capillary bridges. CMC surfaces of revolution, classified by Charles Delaunay in 1841, include the 2-sphere, the cylinder, the vanishing mean curvature catenoid (a minimal sur…
▽ More
We investigate the structure of crystalline particle arrays on constant mean curvature (CMC) surfaces of revolution. Such curved crystals have been realized physically by creating charge-stabilized colloidal arrays on liquid capillary bridges. CMC surfaces of revolution, classified by Charles Delaunay in 1841, include the 2-sphere, the cylinder, the vanishing mean curvature catenoid (a minimal surface) and the richer and less investigated unduloid and nodoid. We determine numerically candidate ground state configurations for 1000 point-like particles interacting with a pairwise-repulsive dipole-dipole interaction potential. We mimic stretching of capillary bridges by determining the equilibrium configurations of particles arrayed on a sequence of Delaunay surfaces obtained by increasing or decreasing the height at constant volume starting from a given initial surface, either a fat cylinder or a square cylinder. In this case the stretching process takes one through a complicated sequence of Delaunay surfaces each with different geometrical parameters including the aspect ratio, mean curvature and maximal Gaussian curvature. Unduloids, catenoids and nodoids all appear in this process. Defect motifs in the ground state evolve from dislocations at the boundary to dislocations in the interior to pleats and scars in the interior and then isolated 7-fold disclinations in the interior as the capillary bridge narrows at the waist (equator) and the maximal (negative) Gaussian curvature grows. We also check theoretical predictions that the isolated disclinations are present in the ground state when the surface contains a geodesic disc with integrated Gaussian curvature exceeding -pi/3. Finally we explore minimal energy configurations on sets of slices of a given Delaunay surface and obtain configurations and defect motifs consistent with those seen in stretching.
△ Less
Submitted 14 July, 2013; v1 submitted 7 May, 2013;
originally announced May 2013.
-
Defect annihilation and proliferation in active nematics
Authors:
Luca Giomi,
Mark J. Bowick,
Xu Ma,
M. Cristina Marchetti
Abstract:
Liquid crystals inevitably possess topological defect excitations generated through boundary conditions, applied fields or in quenches to the ordered phase. In equilibrium pairs of defects coarsen and annihilate as the uniform ground state is approached. Here we show that defects in active liquid crystals exhibit profoundly different behavior, depending on the degree of activity and its contractil…
▽ More
Liquid crystals inevitably possess topological defect excitations generated through boundary conditions, applied fields or in quenches to the ordered phase. In equilibrium pairs of defects coarsen and annihilate as the uniform ground state is approached. Here we show that defects in active liquid crystals exhibit profoundly different behavior, depending on the degree of activity and its contractile or extensile character. While contractile systems enhance the annihilation dynamics of passive systems, extensile systems act to drive defects apart so that they swarm around in the manner of topologically well-characterized self-propelled particles. We develop a simple analytical model for the defect dynamics which reproduces the key features of both the numerical solutions and recent experiments on microtuble-kinesin assemblies.
△ Less
Submitted 4 June, 2013; v1 submitted 19 March, 2013;
originally announced March 2013.
-
Molecular Tilt on Monolayer-Protected Nanoparticles
Authors:
Luca Giomi,
Mark J. Bowick,
Xu Ma,
Apala Majumdar
Abstract:
The structure of the tilted phase of monolayer-protected nanoparticles is investigated by means of a simple Ginzburg-Landau model. The theory contains two dimensionless parameters representing the preferential tilt angle and the ratio epsilon between the energy cost due to spatial variations in the tilt of the coating molecules and that of the van der Waals interactions which favors uniform tilt.…
▽ More
The structure of the tilted phase of monolayer-protected nanoparticles is investigated by means of a simple Ginzburg-Landau model. The theory contains two dimensionless parameters representing the preferential tilt angle and the ratio epsilon between the energy cost due to spatial variations in the tilt of the coating molecules and that of the van der Waals interactions which favors uniform tilt. We analyze the model for both spherical and octahedral particles. On spherical particles, we find a transition from a tilted phase, at small epsilon, to a phase where the molecules spontaneously align along the surface normal and tilt disappears. Octahedral particles have an additional phase at small epsilon characterized by the presence of six topological defects. These defective configurations provide preferred sites for the chemical functionalization of monolayer-protected nanoparticles via place-exchange reactions and their consequent linking to form molecules and bulk materials.
△ Less
Submitted 9 November, 2011;
originally announced November 2011.
-
The Electric Double Layer Structure Around Charged Spherical Interfaces
Authors:
Zhenwei Yao,
Mark J. Bowick,
Xu Ma
Abstract:
We derive a formally simple approximate analytical solution to the Poisson-Boltzmann equation for the spherical system via a geometric map**. Its regime of applicability in the parameter space of the spherical radius and the surface potential is determined, and its superiority over the linearized solution is demonstrated.
We derive a formally simple approximate analytical solution to the Poisson-Boltzmann equation for the spherical system via a geometric map**. Its regime of applicability in the parameter space of the spherical radius and the surface potential is determined, and its superiority over the linearized solution is demonstrated.
△ Less
Submitted 31 January, 2012; v1 submitted 24 October, 2011;
originally announced October 2011.
-
Morphology of Nematic and Smectic Vesicles
Authors:
Xiangjun Xing,
Homin Shin,
Mark J. Bowick,
Zhenwei Yao,
Lin Jia,
Min-Hui Li
Abstract:
Recent experiments on vesicles formed from block copolymers with liquid-crystalline side-chains reveal a rich variety of vesicle morphologies. The additional internal order ("structure") developed by these self-assembled block copolymer vesicles can lead to significantly deformed vesicles as a result of the delicate interplay between two-dimensional ordering and vesicle shape. The inevitable topol…
▽ More
Recent experiments on vesicles formed from block copolymers with liquid-crystalline side-chains reveal a rich variety of vesicle morphologies. The additional internal order ("structure") developed by these self-assembled block copolymer vesicles can lead to significantly deformed vesicles as a result of the delicate interplay between two-dimensional ordering and vesicle shape. The inevitable topological defects in structured vesicles of spherical topology also play an essential role in controlling the final vesicle morphology. Here we develop a minimal theoretical model for the morphology of the membrane structure with internal nematic/smectic order. Using both analytic and numerical approaches, we show that the possible low free energy morphologies include nano-size cylindrical micelles (nano-fibers), faceted tetrahedral vesicles, and ellipsoidal vesicles, as well as cylindrical vesicles. The tetrahedral vesicle is a particularly fascinating example of a faceted liquid-crystalline membrane. Faceted liquid vesicles may lead to the design of supra-molecular structures with tetrahedral symmetry and new classes of nano-carriers.
△ Less
Submitted 24 August, 2011;
originally announced August 2011.
-
Self-Propulsion of Droplets by Spatially-Varying Roughness
Authors:
Zhenwei Yao,
Mark J. Bowick
Abstract:
Under partial wetting conditions, making a substrate uniformly rougher enhances the wetting characteristics of the corresponding smooth substrate {--} hydrophilic systems become even more hydrophilic and hydrophobic systems even more hydrophobic. Here we show that spatial texturing of the roughness may lead to spontaneous propulsion of droplets. Individual droplets are driven toward regions of max…
▽ More
Under partial wetting conditions, making a substrate uniformly rougher enhances the wetting characteristics of the corresponding smooth substrate {--} hydrophilic systems become even more hydrophilic and hydrophobic systems even more hydrophobic. Here we show that spatial texturing of the roughness may lead to spontaneous propulsion of droplets. Individual droplets are driven toward regions of maximal roughness for intrinsically hydrophilic systems and toward regions of minimal roughness for intrinsically hydrophobic systems. Spatial texturing can be achieved by wrinkling the substrate with sinusoidal grooves whose wavelength varies in one direction (inhomogeneous wrinkling) or lithographically etching a radial pattern of fractal (Koch curve) grooves on the substrate. Richer energy landscapes for droplet trajectories can be designed by combining roughness texturing with chemical or material patterning of the substrate.
△ Less
Submitted 27 June, 2011;
originally announced June 2011.
-
Crystalline Order on Catenoidal Capillary Bridges
Authors:
Mark J. Bowick,
Zhenwei Yao
Abstract:
We study the defect structure of crystalline particle arrays on negative Gaussian curvature capillary bridges with vanishing mean curvature (catenoids). The threshold aspect ratio for the appearance of isolated disclinations is found and the optimal positions for dislocations determined. We also discuss the transition from isolated disclinations to scars as particle number and aspect ratio are var…
▽ More
We study the defect structure of crystalline particle arrays on negative Gaussian curvature capillary bridges with vanishing mean curvature (catenoids). The threshold aspect ratio for the appearance of isolated disclinations is found and the optimal positions for dislocations determined. We also discuss the transition from isolated disclinations to scars as particle number and aspect ratio are varied.
△ Less
Submitted 20 December, 2010;
originally announced December 2010.