-
Numerical Modelling and GNSS Observations of Ionospheric Depletions due to a Small-Lift Launch Vehicle
Authors:
G. W. Bowden,
M. Brown
Abstract:
Space launches produce ionospheric disturbances which can be observed through measurements such as Global Navigation Satellite System signal delays. Here we report observations and numerical simulations of the ionospheric depletion due to a Small-Lift Launch Vehicle. The case examined was the launch of a Rocket Lab Electron at 22:30 UTC on March 22, 2021. Despite the very small launch vehicle, gro…
▽ More
Space launches produce ionospheric disturbances which can be observed through measurements such as Global Navigation Satellite System signal delays. Here we report observations and numerical simulations of the ionospheric depletion due to a Small-Lift Launch Vehicle. The case examined was the launch of a Rocket Lab Electron at 22:30 UTC on March 22, 2021. Despite the very small launch vehicle, ground stations in the Chatham Islands measured decreases in line-of-sight total electron content for navigation satellite signals following the launch. General Circulation Model results indicated ionospheric depletions which were comparable with these measurements. Line-of-sight measurements showed a maximum decrease of $2.7$~TECU in vertical total electron content, compared with a simulated decrease of $2.6$~TECU. Advection of the exhaust plume due to its initial velocity and subsequent effects of neutral winds are identified as some remaining challenges for this form of modelling.
△ Less
Submitted 31 March, 2023;
originally announced March 2023.
-
Analysis of atomic-clock data to constrain variations of fundamental constants
Authors:
Nathaniel Sherrill,
Adam O. Parsons,
Charles F. A. Baynham,
William Bowden,
E. Anne Curtis,
Richard Hendricks,
Ian R. Hill,
Richard Hobson,
Helen S. Margolis,
Billy I. Robertson,
Marco Schioppo,
Krzysztof Szymaniec,
Alexandra Tofful,
Jacob Tunesi,
Rachel M. Godun,
Xavier Calmet
Abstract:
We present a new framework to study the time variation of fundamental constants in a model-independent way. Model independence implies more free parameters than assumed in previous studies. Using data from atomic clocks based on $^{87}$Sr, $^{171}$Yb$^+$ and $^{133}$Cs, we set bounds on parameters controlling the variation of the fine-structure constant, $α$, and the electron-to-proton mass ratio,…
▽ More
We present a new framework to study the time variation of fundamental constants in a model-independent way. Model independence implies more free parameters than assumed in previous studies. Using data from atomic clocks based on $^{87}$Sr, $^{171}$Yb$^+$ and $^{133}$Cs, we set bounds on parameters controlling the variation of the fine-structure constant, $α$, and the electron-to-proton mass ratio, $μ$. We consider variations on timescales ranging from a minute to almost a day. In addition, we use our results to derive some of the tightest limits to date on the parameter space of models of ultralight dark matter and axion-like particles.
△ Less
Submitted 15 December, 2023; v1 submitted 9 February, 2023;
originally announced February 2023.
-
Improving the Q factor of an optical atomic clock using quantum non-demolition measurement
Authors:
William Bowden,
Alvise Vianello,
Ian R Hill,
Marco Schioppo,
Richard Hobson
Abstract:
Quantum non-demolition (QND) measurement is a remarkable tool for the manipulation of quantum systems. It allows specific information to be extracted while still preserving fragile quantum observables of the system. Here we apply cavity-based QND measurement to an optical lattice clock---a type of atomic clock with unrivalled frequency precision---preserving the quantum coherence of the atoms afte…
▽ More
Quantum non-demolition (QND) measurement is a remarkable tool for the manipulation of quantum systems. It allows specific information to be extracted while still preserving fragile quantum observables of the system. Here we apply cavity-based QND measurement to an optical lattice clock---a type of atomic clock with unrivalled frequency precision---preserving the quantum coherence of the atoms after readout with 80\% fidelity. We apply this technique to stabilise the phase of an ultrastable laser to a coherent atomic state via a series of repeated QND measurements. We exploit the improved phase-coherence of the ultrastable laser to interrogate a separate optical lattice clock, using a Ramsey spectroscopy time extended from 300~ms to 2~s. With this technique we maintain 95\% contrast and observe a seven-fold increase in the clock's \emph{Q} factor to $1.7\times10^{15}$.
△ Less
Submitted 21 October, 2020; v1 submitted 20 October, 2020;
originally announced October 2020.
-
A strontium optical lattice clock with $1 \times 10^{-17}$ uncertainty and measurement of its absolute frequency
Authors:
Richard Hobson,
William Bowden,
Alissa Silva,
Charles F. A. Baynham,
Helen S. Margolis,
Patrick E. G. Baird,
Patrick Gill,
Ian R. Hill
Abstract:
We present a measurement of the absolute frequency of the 5s$^2$ $^1$S$_0$ to 5s5p $^3$P$_0$ transition in $^{87}$Sr, which is a secondary representation of the SI second. We describe the optical lattice clock apparatus used for the measurement, and we focus in detail on how its systematic frequency shifts are evaluated with a total fractional uncertainty of $1 \times 10^{-17}$. Traceability to th…
▽ More
We present a measurement of the absolute frequency of the 5s$^2$ $^1$S$_0$ to 5s5p $^3$P$_0$ transition in $^{87}$Sr, which is a secondary representation of the SI second. We describe the optical lattice clock apparatus used for the measurement, and we focus in detail on how its systematic frequency shifts are evaluated with a total fractional uncertainty of $1 \times 10^{-17}$. Traceability to the International System of Units is provided via comparison to International Atomic Time (TAI). Gathering data over 5- and 15-day periods, with the lattice clock operating on average 74$\%$ of the time, we measure the frequency of the transition to be 429228004229873.1(5) Hz, which corresponds to a fractional uncertainty of $1 \times 10^{-15}$. We describe in detail how this uncertainty arises from the intermediate steps linking the optical frequency standard, through our local time scale UTC(NPL), to an ensemble of primary and secondary frequency standards which steer TAI. The calculated absolute frequency of the transition is in good agreement with recent measurements carried out in other laboratories around the world.
△ Less
Submitted 21 May, 2020;
originally announced May 2020.
-
Numerical simulation of ionospheric depletions resulting from rocket launches using a general circulation model
Authors:
G. W. Bowden,
P. Lorrain,
M. Brown
Abstract:
Rocket exhaust plumes have been observed to cause large-scale depletions of ionospheric plasmas ("ionospheric holes"). In the F-region, charge exchange reactions occur between O^+ ions and exhaust species such as H$_2$O, H$_2$, and CO$_2$ to form ions which then undergo rapid dissociative recombination. The Global Ionosphere-Thermosphere Model (GITM) was extended to include these chemical reaction…
▽ More
Rocket exhaust plumes have been observed to cause large-scale depletions of ionospheric plasmas ("ionospheric holes"). In the F-region, charge exchange reactions occur between O^+ ions and exhaust species such as H$_2$O, H$_2$, and CO$_2$ to form ions which then undergo rapid dissociative recombination. The Global Ionosphere-Thermosphere Model (GITM) was extended to include these chemical reactions and appropriate source terms to represent rocket exhaust plumes. The resulting model was applied to ionospheric depletions resulting from the launches of Jason-3 and FORMOSAT-5 on SpaceX Falcon 9 rockets from Vandenberg Air Force Base. Outputs from the model were compared with GNSS, ionosonde, and satellite Langmuir probe measurements. Simulation indicated that the FORMOSAT-5 launch resulted in a far larger and longer-lived ionospheric depletion than the Jason-3 launch, consistent with observations.
△ Less
Submitted 20 January, 2020;
originally announced January 2020.
-
A mid-infrared magneto-optical trap of metastable strontium for an optical lattice clock
Authors:
Richard Hobson,
William Bowden,
Alvise Vianello,
Ian R. Hill,
Patrick Gill
Abstract:
We report on the realization of a magneto-optical trap (MOT) for metastable strontium operating on the 2.92 $μ$m transition between the energy levels $5s5p~^3\mathrm{P}_2$ and $5s4d~^3\mathrm{D}_3$. The strontium atoms are initially captured in a MOT operating on the 461 nm transition between the energy levels $5s^2~^1\mathrm{S}_0$ and $5s5p~^1\mathrm{P}_1$, prior to being transferred into the met…
▽ More
We report on the realization of a magneto-optical trap (MOT) for metastable strontium operating on the 2.92 $μ$m transition between the energy levels $5s5p~^3\mathrm{P}_2$ and $5s4d~^3\mathrm{D}_3$. The strontium atoms are initially captured in a MOT operating on the 461 nm transition between the energy levels $5s^2~^1\mathrm{S}_0$ and $5s5p~^1\mathrm{P}_1$, prior to being transferred into the metastable MOT and cooled to a final temperature of 6 $μ$K. Challenges arising from aligning the mid-infrared and 461 nm light are mitigated by employing the same pyramid reflector to realize both MOTs. Finally, the 2.92 $μ$m transition is used to realize a full cooling sequence for an optical lattice clock, in which cold samples of $^{87}\mathrm{Sr}$ are loaded into a magic-wavelength optical lattice and initialized in a spin-polarized state to allow high-precision spectroscopy of the $5s^2~^1\mathrm{S}_0$ to $5s5p~^3\mathrm{P}_0$ clock transition.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Cavity-enhanced non-destructive detection of atoms for an optical lattice clock
Authors:
Richard Hobson,
William Bowden,
Alvise Vianello,
Ian R. Hill,
Patrick Gill
Abstract:
We demonstrate a new method of cavity-enhanced non-destructive detection of atoms for a strontium optical lattice clock. The detection scheme is shown to be linear in atom number up to at least 10,000 atoms, to reject technical noise sources, to achieve signal to noise ratio close to the photon shot noise limit, to provide spatially uniform atom-cavity coupling, and to minimize inhomogeneous ac St…
▽ More
We demonstrate a new method of cavity-enhanced non-destructive detection of atoms for a strontium optical lattice clock. The detection scheme is shown to be linear in atom number up to at least 10,000 atoms, to reject technical noise sources, to achieve signal to noise ratio close to the photon shot noise limit, to provide spatially uniform atom-cavity coupling, and to minimize inhomogeneous ac Stark shifts. These features enable detection of atoms with minimal perturbation to the atomic state, a critical step towards realizing an ultra-high-stability, quantum-enhanced optical lattice clock.
△ Less
Submitted 20 December, 2019;
originally announced December 2019.
-
AION: An Atom Interferometer Observatory and Network
Authors:
L. Badurina,
E. Bentine,
D. Blas,
K. Bongs,
D. Bortoletto,
T. Bowcock,
K. Bridges,
W. Bowden,
O. Buchmueller,
C. Burrage,
J. Coleman,
G. Elertas,
J. Ellis,
C. Foot,
V. Gibson,
M. G. Haehnelt,
T. Harte,
S. Hedges,
R. Hobson,
M. Holynski,
T. Jones,
M. Langlois,
S. Lellouch,
M. Lewicki,
R. Maiolino
, et al. (16 additional authors not shown)
Abstract:
We outline the experimental concept and key scientific capabilities of AION (Atom Interferometer Observatory and Network), a proposed UK-based experimental programme using cold strontium atoms to search for ultra-light dark matter, to explore gravitational waves in the mid-frequency range between the peak sensitivities of the LISA and LIGO/Virgo/ KAGRA/INDIGO/Einstein Telescope/Cosmic Explorer exp…
▽ More
We outline the experimental concept and key scientific capabilities of AION (Atom Interferometer Observatory and Network), a proposed UK-based experimental programme using cold strontium atoms to search for ultra-light dark matter, to explore gravitational waves in the mid-frequency range between the peak sensitivities of the LISA and LIGO/Virgo/ KAGRA/INDIGO/Einstein Telescope/Cosmic Explorer experiments, and to probe other frontiers in fundamental physics. AION would complement other planned searches for dark matter, as well as probe mergers involving intermediate mass black holes and explore early universe cosmology. AION would share many technical features with the MAGIS experimental programme in the US, and synergies would flow from operating AION in a network with this experiment, as well as with other atom interferometer experiments such as MIGA, ZAIGA and ELGAR. Operating AION in a network with other gravitational wave detectors such as LIGO, Virgo and LISA would also offer many synergies.
△ Less
Submitted 8 May, 2020; v1 submitted 26 November, 2019;
originally announced November 2019.
-
A low-noise resonant input transimpedance amplified photodetector
Authors:
William Bowden,
Alvise Vianello,
Richard Hobson
Abstract:
We present the design and characterisation of a low-noise, resonant input transimpedance amplified photodetector. The device operates at a resonance frequency of $90 \,\textrm{MHz}$ and exhibits an input referred current noise of $1.2\,\textrm{pA}/\sqrt{\textrm{Hz}}$---marginally above the the theoretical limit of $1.0\,\textrm{pA}/\sqrt{\textrm{Hz}}$ set by the room temperature Johnson noise of t…
▽ More
We present the design and characterisation of a low-noise, resonant input transimpedance amplified photodetector. The device operates at a resonance frequency of $90 \,\textrm{MHz}$ and exhibits an input referred current noise of $1.2\,\textrm{pA}/\sqrt{\textrm{Hz}}$---marginally above the the theoretical limit of $1.0\,\textrm{pA}/\sqrt{\textrm{Hz}}$ set by the room temperature Johnson noise of the detector's $16\,\textrm{k}Ω$ transimpedance. As a result, the photodetector allows for shot-noise limited operation for input powers exceeding $14\,μ\textrm{W}$ at $461\,\textrm{nm}$ corresponding to a noise equivalent power of $3.5\,\textrm{pW}/\sqrt{\textrm{Hz}}$. The key design feature which enables this performance is a low-noise, common-source JFET amplifier at the input which helps to reduce the input referred noise contribution of the following amplification stages.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
Direct comparisons of European primary and secondary frequency standards via satellite techniques
Authors:
F. Riedel,
A. Al-Masoudi,
E. Benkler,
S. Dörscher,
V. Gerginov,
C. Grebing,
S. Häfner,
N. Huntemann,
B. Lipphardt,
C. Lisdat,
E. Peik,
D. Piester,
C. Sanner,
C. Tamm,
S. Weyers,
H. Denker,
L. Timmen,
C. Voigt,
D. Calonico,
G. Cerretto,
G. A. Costanzo,
F. Levi,
I. Sesia,
J. Achkar,
J. Guèna
, et al. (24 additional authors not shown)
Abstract:
We carried out a 26-day comparison of five simultaneously operated optical clocks and six atomic fountain clocks located at INRIM, LNE-SYRTE, NPL and PTB by using two satellite-based frequency comparison techniques: broadband Two-Way Satellite Time and Frequency Transfer (TWSTFT) and Global Positioning System Precise Point Positioning (GPS PPP). With an enhanced statistical analysis procedure taki…
▽ More
We carried out a 26-day comparison of five simultaneously operated optical clocks and six atomic fountain clocks located at INRIM, LNE-SYRTE, NPL and PTB by using two satellite-based frequency comparison techniques: broadband Two-Way Satellite Time and Frequency Transfer (TWSTFT) and Global Positioning System Precise Point Positioning (GPS PPP). With an enhanced statistical analysis procedure taking into account correlations and gaps in the measurement data, combined overall uncertainties in the range of $1.8 \times 10^{-16}$ to $3.5 \times 10^{-16}$ for the optical clock comparisons were found. The comparison of the fountain clocks yields results with a maximum relative frequency difference of $6.9 \times 10^{-16}$, and combined overall uncertainties in the range of $4.8 \times 10^{-16}$ to $7.7 \times 10^{-16}$.
△ Less
Submitted 9 October, 2019;
originally announced October 2019.
-
AEDGE: Atomic Experiment for Dark Matter and Gravity Exploration in Space
Authors:
Yousef Abou El-Neaj,
Cristiano Alpigiani,
Sana Amairi-Pyka,
Henrique Araujo,
Antun Balaz,
Angelo Bassi,
Lars Bathe-Peters,
Baptiste Battelier,
Aleksandar Belic,
Elliot Bentine,
Jose Bernabeu,
Andrea Bertoldi,
Robert Bingham,
Diego Blas,
Vasiliki Bolpasi,
Kai Bongs,
Sougato Bose,
Philippe Bouyer,
Themis Bowcock,
William Bowden,
Oliver Buchmueller,
Clare Burrage,
Xavier Calmet,
Benjamin Canuel,
Laurentiu-Ioan Caramete
, et al. (107 additional authors not shown)
Abstract:
We propose in this White Paper a concept for a space experiment using cold atoms to search for ultra-light dark matter, and to detect gravitational waves in the frequency range between the most sensitive ranges of LISA and the terrestrial LIGO/Virgo/KAGRA/INDIGO experiments. This interdisciplinary experiment, called Atomic Experiment for Dark Matter and Gravity Exploration (AEDGE), will also compl…
▽ More
We propose in this White Paper a concept for a space experiment using cold atoms to search for ultra-light dark matter, and to detect gravitational waves in the frequency range between the most sensitive ranges of LISA and the terrestrial LIGO/Virgo/KAGRA/INDIGO experiments. This interdisciplinary experiment, called Atomic Experiment for Dark Matter and Gravity Exploration (AEDGE), will also complement other planned searches for dark matter, and exploit synergies with other gravitational wave detectors. We give examples of the extended range of sensitivity to ultra-light dark matter offered by AEDGE, and how its gravitational-wave measurements could explore the assembly of super-massive black holes, first-order phase transitions in the early universe and cosmic strings. AEDGE will be based upon technologies now being developed for terrestrial experiments using cold atoms, and will benefit from the space experience obtained with, e.g., LISA and cold atom experiments in microgravity.
This paper is based on a submission (v1) in response to the Call for White Papers for the Voyage 2050 long-term plan in the ESA Science Programme. ESA limited the number of White Paper authors to 30. However, in this version (v2) we have welcomed as supporting authors participants in the Workshop on Atomic Experiments for Dark Matter and Gravity Exploration held at CERN: ({\tt https://indico.cern.ch/event/830432/}), as well as other interested scientists, and have incorporated additional material.
△ Less
Submitted 10 October, 2019; v1 submitted 2 August, 2019;
originally announced August 2019.
-
A pyramid MOT with integrated optical cavities as a cold atom platform for an optical lattice clock
Authors:
William Bowden,
Richard Hobson,
Ian R. Hill,
Alvise Vianello,
Marco Schioppo,
Alissa Silva,
Helen S. Margolis,
Patrick E. G. Baird,
Patrick Gill
Abstract:
We realize a two-stage, hexagonal pyramid magneto-optical trap (MOT) with strontium, and demonstrate loading of cold atoms into cavity-enhanced 1D and 2D optical lattice traps, all within a single compact assembly of in-vacuum optics. We show that the device is suitable for high-performance quantum technologies, focusing especially on its intended application as a strontium optical lattice clock.…
▽ More
We realize a two-stage, hexagonal pyramid magneto-optical trap (MOT) with strontium, and demonstrate loading of cold atoms into cavity-enhanced 1D and 2D optical lattice traps, all within a single compact assembly of in-vacuum optics. We show that the device is suitable for high-performance quantum technologies, focusing especially on its intended application as a strontium optical lattice clock. We prepare $2\times 10^4$ spin-polarized atoms of $^{87}$Sr in the optical lattice within 500 ms; we observe a vacuum-limited lifetime of atoms in the lattice of 27 s; and we measure a background DC electric field of 12 Vm$^{-1}$ from stray charges, corresponding to a fractional frequency shift of $(-1.2\times 0.8)\times 10^{-18}$ to the strontium clock transition. When used in combination with careful management of the blackbody radiation environment, the device shows potential as a platform for realizing a compact, robust, transportable optical lattice clock with systematic uncertainty at the $10^{-18}$ level.
△ Less
Submitted 31 July, 2019;
originally announced July 2019.
-
Search for transient variations of the fine structure constant and dark matter using fiber-linked optical atomic clocks
Authors:
B. M. Roberts,
P. Delva,
A. Al-Masoudi,
A. Amy-Klein,
C. Bærentsen,
C. F. A. Baynham,
E. Benkler,
S. Bilicki,
S. Bize,
W. Bowden,
J. Calvert,
V. Cambier,
E. Cantin,
E. A. Curtis,
S. Dörscher,
M. Favier,
F. Frank,
P. Gill,
R. M. Godun,
G. Grosche,
C. Guo,
A. Hees,
I. R. Hill,
R. Hobson,
N. Huntemann
, et al. (29 additional authors not shown)
Abstract:
We search for transient variations of the fine structure constant using data from a European network of fiber-linked optical atomic clocks. By searching for coherent variations in the recorded clock frequency comparisons across the network, we significantly improve the constraints on transient variations of the fine structure constant. For example, we constrain the variation in alpha to <5*10^-17…
▽ More
We search for transient variations of the fine structure constant using data from a European network of fiber-linked optical atomic clocks. By searching for coherent variations in the recorded clock frequency comparisons across the network, we significantly improve the constraints on transient variations of the fine structure constant. For example, we constrain the variation in alpha to <5*10^-17 for transients of duration 10^3 s. This analysis also presents a possibility to search for dark matter, the mysterious substance hypothesised to explain galaxy dynamics and other astrophysical phenomena that is thought to dominate the matter density of the universe. At the current sensitivity level, we find no evidence for dark matter in the form of topological defects (or, more generally, any macroscopic objects), and we thus place constraints on certain potential couplings between the dark matter and standard model particles, substantially improving upon the existing constraints, particularly for large (>~10^4 km) objects.
△ Less
Submitted 8 July, 2019; v1 submitted 4 July, 2019;
originally announced July 2019.
-
Guidelines for develo** optical clocks with $10^{-18}$ fractional frequency uncertainty
Authors:
Moustafa Abdel-Hafiz,
Piotr Ablewski,
Ali Al-Masoudi,
Héctor Álvarez Martínez,
Petr Balling,
Geoffrey Barwood,
Erik Benkler,
Marcin Bober,
Mateusz Borkowski,
William Bowden,
Roman Ciuryło,
Hubert Cybulski,
Alexandre Didier,
Miroslav Doležal,
Sören Dörscher,
Stephan Falke,
Rachel M. Godun,
Ramiz Hamid,
Ian R. Hill,
Richard Hobson,
Nils Huntemann,
Yann Le Coq,
Rodolphe Le Targat,
Thomas Legero,
Thomas Lindvall
, et al. (20 additional authors not shown)
Abstract:
There has been tremendous progress in the performance of optical frequency standards since the first proposals to carry out precision spectroscopy on trapped, single ions in the 1970s. The estimated fractional frequency uncertainty of today's leading optical standards is currently in the $10^{-18}$ range, approximately two orders of magnitude better than that of the best caesium primary frequency…
▽ More
There has been tremendous progress in the performance of optical frequency standards since the first proposals to carry out precision spectroscopy on trapped, single ions in the 1970s. The estimated fractional frequency uncertainty of today's leading optical standards is currently in the $10^{-18}$ range, approximately two orders of magnitude better than that of the best caesium primary frequency standards. This exceptional accuracy and stability is resulting in a growing number of research groups develo** optical clocks. While good review papers covering the topic already exist, more practical guidelines are needed as a complement. The purpose of this document is therefore to provide technical guidance for researchers starting in the field of optical clocks. The target audience includes national metrology institutes (NMIs) wanting to set up optical clocks (or subsystems thereof) and PhD students and postdocs entering the field. Another potential audience is academic groups with experience in atomic physics and atom or ion trap**, but with less experience of time and frequency metrology and optical clock requirements. These guidelines have arisen from the scope of the EMPIR project "Optical clocks with $1 \times 10^{-18}$ uncertainty" (OC18). Therefore, the examples are from European laboratories even though similar work is carried out all over the world. The goal of OC18 was to push the development of optical clocks by improving each of the necessary subsystems: ultrastable lasers, neutral-atom and single-ion traps, and interrogation techniques. This document shares the knowledge acquired by the OC18 project consortium and gives practical guidance on each of these aspects.
△ Less
Submitted 13 August, 2019; v1 submitted 27 June, 2019;
originally announced June 2019.
-
Rydberg Electrometry for Optical Lattice Clocks
Authors:
William Bowden,
Richard Hobson,
Paul Huillery,
Patrick Gill,
Matthew P. A. Jones,
Ian R. Hill
Abstract:
Electrometry is performed using Rydberg states to evaluate the quadratic Stark shift of the $5s^2$ $^1\textrm{S}_0-5s5p$ $^3\textrm{P}_0$ clock transition in strontium. By measuring the Stark shift of the highly excited $5s75d\;^1\textrm{D}_2$ state using electromagnetically induced transparency, we characterize the electric field with sufficient precision to provide tight constraints on the syste…
▽ More
Electrometry is performed using Rydberg states to evaluate the quadratic Stark shift of the $5s^2$ $^1\textrm{S}_0-5s5p$ $^3\textrm{P}_0$ clock transition in strontium. By measuring the Stark shift of the highly excited $5s75d\;^1\textrm{D}_2$ state using electromagnetically induced transparency, we characterize the electric field with sufficient precision to provide tight constraints on the systematic shift to the clock transition. Using the theoretically derived, and experimentally verified, polarizability for this Rydberg state we can measure the residual field with an uncertainty well below $1 \textrm{V} \textrm{m}^{-1}$. This resolution allows us to constrain the fractional frequency uncertainty of the quadratic Stark shift of the clock transition to $2\times10^{-20}$.
△ Less
Submitted 6 June, 2017;
originally announced June 2017.
-
Test of special relativity using a fiber network of optical clocks
Authors:
P. Delva,
J. Lodewyck,
S. Bilicki,
E. Bookjans,
G. Vallet,
R. Le Targat,
P. -E. Pottie,
C. Guerlin,
F. Meynadier,
C. Le Poncin-Lafitte,
O. Lopez,
A. Amy-Klein,
W. -K. Lee,
N. Quintin,
C. Lisdat,
A. Al-Masoudi,
S. Dörscher,
C. Grebing,
G. Grosche,
A. Kuhl,
S. Raupach,
U. Sterr,
I. R. Hill,
R. Hobson,
W. Bowden
, et al. (6 additional authors not shown)
Abstract:
Phase compensated optical fiber links enable high accuracy atomic clocks separated by thousands of kilometers to be compared with unprecedented statistical resolution. By searching for a daily variation of the frequency difference between four strontium optical lattice clocks in different locations throughout Europe connected by such links, we improve upon previous tests of time dilation predicted…
▽ More
Phase compensated optical fiber links enable high accuracy atomic clocks separated by thousands of kilometers to be compared with unprecedented statistical resolution. By searching for a daily variation of the frequency difference between four strontium optical lattice clocks in different locations throughout Europe connected by such links, we improve upon previous tests of time dilation predicted by special relativity. We obtain a constraint on the Robertson--Mansouri--Sexl parameter $|α|\lesssim 1.1 \times10^{-8}$ quantifying a violation of time dilation, thus improving by a factor of around two the best known constraint obtained with Ives--Stilwell type experiments, and by two orders of magnitude the best constraint obtained by comparing atomic clocks. This work is the first of a new generation of tests of fundamental physics using optical clocks and fiber links. As clocks improve, and as fiber links are routinely operated, we expect that the tests initiated in this paper will improve by orders of magnitude in the near future.
△ Less
Submitted 12 June, 2017; v1 submitted 13 March, 2017;
originally announced March 2017.
-
A High-Performance, Low-Cost Laser Shutter using a Piezoelectric Cantilever Actuator
Authors:
W. Bowden,
I. R. Hill,
P. E. G. Baird,
P. Gill
Abstract:
We report the design and characterization of an optical shutter based on a piezoelectric cantilever. Compared to conventional electro-magnetic shutters, the device is intrinsically low power and acoustically quiet. The cantilever position is controlled by a high-voltage op-amp circuit for easy tuning of the range of travel, and mechanical slew rate, which enables a factor of 30 reduction in mechan…
▽ More
We report the design and characterization of an optical shutter based on a piezoelectric cantilever. Compared to conventional electro-magnetic shutters, the device is intrinsically low power and acoustically quiet. The cantilever position is controlled by a high-voltage op-amp circuit for easy tuning of the range of travel, and mechanical slew rate, which enables a factor of 30 reduction in mechanical noise compared to a rapidly switched device. We achieve shuttering rise and fall times of 11 $μ$s, corresponding to mechanical slew rates of 1.3 $\textrm{ ms}^{-1}$, with an timing jitter of less than 1 $μ$s. When used to create optical pulses, we achieve minimum pulse durations of 250 $μ$s. The reliability of the shutter was investigated by operating continuously for one week at 10 Hz switching rate. After this period, neither the shutter delay or actuation speed had changed by a notable amount. We also show that the high-voltage electronics can be easily configured as a versatile low-noise, high-bandwidth piezo driver, well-suited to applications in laser frequency control.
△ Less
Submitted 19 September, 2016;
originally announced September 2016.
-
A low maintenance Sr optical lattice clock
Authors:
Ian R. Hill,
Richard Hobson,
William Bowden,
Elizabeth M. Bridge,
Sean Donnellan,
E. Anne Curtis,
Patrick Gill
Abstract:
We describe the Sr optical lattice clock apparatus at NPL with particular emphasis on techniques used to increase reliability and minimise the human requirement in its operation. Central to this is a clock-referenced transfer cavity scheme for the stabilisation of cooling and trap** lasers. We highlight several measures to increase the reliability of the clock with a view towards the realisation…
▽ More
We describe the Sr optical lattice clock apparatus at NPL with particular emphasis on techniques used to increase reliability and minimise the human requirement in its operation. Central to this is a clock-referenced transfer cavity scheme for the stabilisation of cooling and trap** lasers. We highlight several measures to increase the reliability of the clock with a view towards the realisation of an optical time-scale. The clock contributed 502 hours of data over a 25 day period (84% uptime) in a recent measurement campaign with several uninterrupted periods of more than 48 hours. An instability of $2\times10^{-17}$ was reached after $10^5$ s of averaging in an interleaved self-comparison of the clock.
△ Less
Submitted 18 February, 2016;
originally announced February 2016.
-
Modified hyper-Ramsey methods for the elimination of probe shifts in optical clocks
Authors:
R. Hobson,
W. Bowden,
S. A. King,
P. E. G. Baird,
I. R. Hill,
P. Gill
Abstract:
We develop a method of modified hyper-Ramsey spectroscopy in optical clocks, achieving complete immunity to the frequency shifts induced by the probing fields themselves. Using particular pulse sequences with tailored phases, frequencies, and durations, we can derive an error signal centered exactly at the unperturbed atomic resonance with a steep discriminant which is robust against variations in…
▽ More
We develop a method of modified hyper-Ramsey spectroscopy in optical clocks, achieving complete immunity to the frequency shifts induced by the probing fields themselves. Using particular pulse sequences with tailored phases, frequencies, and durations, we can derive an error signal centered exactly at the unperturbed atomic resonance with a steep discriminant which is robust against variations in the probe shift. We experimentally investigate the scheme using the magnetically-induced $^1$S$_0- ^3$P$_0$ transition in $^{88}$Sr, demonstrating automatic suppression of a sizeable \num{2e-13} probe Stark shift to below \num{1e-16} even with very large errors in shift compensation.
△ Less
Submitted 3 November, 2015; v1 submitted 27 October, 2015;
originally announced October 2015.
-
An Adaptable Dual Species Effusive Source and Zeeman Slower Design Demonstrated with Rb and Li
Authors:
William Bowden,
Will Gunton,
Mariusz Semczuk,
Kahan Dare,
Kirk W. Madison
Abstract:
We present a dual-species effusive source and Zeeman slower designed to produce slow atomic beams of two elements with a large mass difference and with very different oven temperature requirements. We demonstrate this design for the case of $^6$Li and $^{85}$Rb and achieve MOT loading rates equivalent to that reported in prior work on dual species (Rb+Li) Zeeman slowers operating at the same oven…
▽ More
We present a dual-species effusive source and Zeeman slower designed to produce slow atomic beams of two elements with a large mass difference and with very different oven temperature requirements. We demonstrate this design for the case of $^6$Li and $^{85}$Rb and achieve MOT loading rates equivalent to that reported in prior work on dual species (Rb+Li) Zeeman slowers operating at the same oven temperatures. Key design choices, including thermally separating the effusive sources and using a segmented coil design to enable computer control of the magnetic field profile, ensure that the apparatus can be easily modified to slow other atomic species. By performing the final slowing using the quadruple magnetic field of the MOT, we are able to shorten our Zeeman slower length making for a more compact system without compromising performance. We outline the construction and analyze the emission properties of our effusive sources. We also verify the performance of the source and slower, and we observe sequential loading rates of $8 \times 10^8$ atoms/s for a Rb oven temperature of $120\,^{\circ}$C and $1.5 \times 10^8$ atoms/s for a Li reservoir at $450\,^{\circ}$C, corresponding to reservoir lifetimes for continuous operation of 10 and 4 years respectively.
△ Less
Submitted 2 November, 2015; v1 submitted 24 September, 2015;
originally announced September 2015.
-
Calculation of continuum dam** of Alfvén eigenmodes in 2D and 3D cases
Authors:
G. W. Bowden,
M. J. Hole,
A. Könies
Abstract:
In ideal MHD, shear Alfvén eigenmodes may experience dissipationless dam** due to resonant interaction with the shear Alfvén continuum. This continuum dam** can make a significant contribution to the overall growth/decay rate of shear Alfvén eigenmodes, with consequent implications for fast ion transport. One method for calculating continuum dam** is to solve the MHD eigenvalue problem over…
▽ More
In ideal MHD, shear Alfvén eigenmodes may experience dissipationless dam** due to resonant interaction with the shear Alfvén continuum. This continuum dam** can make a significant contribution to the overall growth/decay rate of shear Alfvén eigenmodes, with consequent implications for fast ion transport. One method for calculating continuum dam** is to solve the MHD eigenvalue problem over a suitable contour in the complex plane, thereby satisfying the causality condition. Such an approach can be implemented in three-dimensional ideal MHD codes which use the Galerkin method. Analytic functions can be fitted to numerical data for equilibrium quantities in order to determine the value of these quantities along the complex contour. This approach requires less resolution than the established technique of calculating dam** as resistivity vanishes and is thus more computationally efficient. The complex contour method has been applied to the three-dimensional finite element ideal MHD code CKA . In this paper we discuss the application of the complex contour technique to calculate the continuum dam** of global modes in tokamak as well as torsatron, W7X and H1-NF stellarator cases. To the authors' knowledge these stellarator calculations represent the first calculation of continuum dam** for eigenmodes in fully three-dimensional equilibria. The continuum dam** of global modes in W7X and H1-NF stellarator configurations investigated is found to depend sensitively on coupling to numerous poloidal and toroidal harmonics.
△ Less
Submitted 8 July, 2015;
originally announced July 2015.
-
A singular finite element technique for calculating continuum dam** of Alfvén eigenmodes
Authors:
George W. Bowden,
Matthew J. Hole
Abstract:
Dam** due to continuum resonances can be calculated using dissipation-less ideal magnetohydrodynamics (MHD) provided that the poles due to these resonances are properly treated. We describe a singular finite element technique for calculating the continuum dam** of Alfvén waves. A Frobenius expansion is used to determine appropriate finite element basis functions on an inner region surrounding…
▽ More
Dam** due to continuum resonances can be calculated using dissipation-less ideal magnetohydrodynamics (MHD) provided that the poles due to these resonances are properly treated. We describe a singular finite element technique for calculating the continuum dam** of Alfvén waves. A Frobenius expansion is used to determine appropriate finite element basis functions on an inner region surrounding a pole due to the continuum resonance. The location of the pole due to the continuum resonance and mode frequency are calculated iteratively using a Galerkin method. This method is used to find the complex frequency and mode structure of a toroidicity-induced Alfvén eigenmode (TAE) in a large aspect ratio circular tokamak and are shown to agree closely with a complex contour technique.
△ Less
Submitted 26 November, 2014;
originally announced November 2014.
-
Anomalous Behavior of Dark States in Quantum Gases of 6Li
Authors:
Mariusz Semczuk,
Will Gunton,
William Bowden,
Kirk W. ~Madison
Abstract:
We create atom-molecule dark states in a degenerate Fermi gas of 6Li in both weakly and strongly interacting regimes using two-photon Raman scattering to couple fermion pairs to bound molecular states in the ground singlet and triplet potential. Near the unitarity point in the BEC-BCS crossover regime, the atom number revival height associated with the dark state abruptly and unexpectedly decrease…
▽ More
We create atom-molecule dark states in a degenerate Fermi gas of 6Li in both weakly and strongly interacting regimes using two-photon Raman scattering to couple fermion pairs to bound molecular states in the ground singlet and triplet potential. Near the unitarity point in the BEC-BCS crossover regime, the atom number revival height associated with the dark state abruptly and unexpectedly decreases and remains low for magnetic fields below the Feshbach resonance center at 832.2~G. With a weakly interacting Fermi gas at 0~G we perform precision dark-state spectroscopy of the least-bound vibrational levels of the lowest singlet and triplet potentials. From these spectra, we obtain binding energies of the $v''=9$, $N''=0$ level of the $a(1^3Σ_{u}^+)$ potential and the $v''=38$, $N''=0$ level of the $X(1^1Σ_{g}^+)$ potential with absolute uncertainty as low as $20$ kHz. For the triplet potential we resolve the molecular hyperfine structure.
△ Less
Submitted 29 July, 2014;
originally announced July 2014.