Showing 1–39 of 39 results for author: Bowden, M

Uncovering an Interfacial Band Resulting from Orbital Hybridization in Nickelate Heterostructures

Authors: Mingyao Chen, Huimin Liu, Xu He, Minjuan Li, Chi Sin Tang, Mengxia Sun, Krishna Prasad Koirala, Mark E. Bowden, Yangyang Li, Xiongfang Liu, Difan Zhou, Shuo Sun, Mark B. H. Breese, Chuanbing Cai, Yingge Du, Andrew T. S. Wee, Le Wang, Xinmao Yin

Abstract: The interaction of atomic orbitals at the interface of perovskite oxide heterostructures has been investigated for its profound impact on the band structures and electronic properties, giving rise to unique electronic states and a variety of tunable functionalities. In this study, we conducted an extensive investigation of the optical and electronic properties of epitaxial NdNiO3 thin films grown… ▽ More The interaction of atomic orbitals at the interface of perovskite oxide heterostructures has been investigated for its profound impact on the band structures and electronic properties, giving rise to unique electronic states and a variety of tunable functionalities. In this study, we conducted an extensive investigation of the optical and electronic properties of epitaxial NdNiO3 thin films grown on a series of single crystal substrates. Unlike films synthesized on other substrates, NdNiO3 on SrTiO3 (NNO/STO) gives rise to a unique band structure which features an additional unoccupied band situated above the Fermi level. Our comprehensive investigation, which incorporated a wide array of experimental techniques and density functional theory calculations, revealed that the emergence of the interfacial band structure is primarily driven by the orbital hybridization between Ti 3d orbitals of the STO substrate and O 2p orbitals of the NNO thin film. Furthermore, exciton peaks have been detected in the optical spectra of the NNO/STO film, attributable to the pronounced electron-electron (e-e) and electron-hole (e-h) interactions propagating from the STO substrate into the NNO film. These findings underscore the substantial influence of interfacial orbital hybridization on the electronic structure of oxide thin-films, thereby offering key insights into tuning their interfacial properties. △ Less

Submitted 29 April, 2024; originally announced April 2024.

Comments: 26 pages,4 figures

Initial Fulcher band observations from high resolution spectroscopy in the MAST-U divertor

Authors: N. Osborne, K. Verhaegh, M. D. Bowden, T. Wijkamp, N. Lonigro, P. Ryan, E. Pawelec, B. Lipschultz, V. Soukhanovskii, T. van den Biggelaar, the MAST-U team

Abstract: High resolution Fulcher band spectroscopy was used in the MAST-U divertors during Super-X and elongated conventional divertor density ramps with $\text{D}_{2}$ fuelling from the mid-plane high-field side. In the Super-X case (density ramp from Greenwald fraction 0.12 to 0.24), the upper divertor showed ground state rotational temperatures of the $\text{D}_{2}$ molecules increasing from $\sim$6000… ▽ More High resolution Fulcher band spectroscopy was used in the MAST-U divertors during Super-X and elongated conventional divertor density ramps with $\text{D}_{2}$ fuelling from the mid-plane high-field side. In the Super-X case (density ramp from Greenwald fraction 0.12 to 0.24), the upper divertor showed ground state rotational temperatures of the $\text{D}_{2}$ molecules increasing from $\sim$6000 K, starting at the detachment onset, to $\sim$9000 K during deepening detachment. This was correlated with the movement of the Fulcher emission region, which is correlated with the ionisation source. The increase in rotational temperature did not occur near the divertor entrance, where the plasma was still ionising. Qualitative agreement was obtained between the lower and upper divertor. Similar rotational temperatures were obtained in the elongated divertor before the detachment onset, although the increase in rotational temperature during detachment was less clearly observed as less deep detachment was obtained. %In the elongated conventional divertor there was some qualitative agreement of this effect impeded by low signal. The measured vibrational distribution of the upper Fulcher state (first four bands) does not agree with a ground state Boltzmann distribution but shows a different characteristic with an elevated population especially in the $ν= 2$ and $ν= 3$ bands. The populations of the $ν= 2$ and $ν= 3$ band relative to the $ν= 0$ band are roughly proportional to the $\textit{rotational}$ temperature. △ Less

Submitted 25 July, 2023; v1 submitted 29 June, 2023; originally announced June 2023.

Free-Standing Epitaxial SrTiO$_3$ Nanomembranes via Remote Epitaxy using Hybrid Molecular Beam Epitaxy

Authors: Hyo** Yoon, Tristan K. Truttmann, Fengdeng Liu, Bethany E. Matthews, Sooho Choo, Qun Su, Vivek Saraswat, Sebastian Manzo, Michael S. Arnold, Mark E. Bowden, Jason K. Kawasaki, Steven J. Koester, Steven R. Spurgeon, Scott A. Chambers, Bharat Jalan

Abstract: The epitaxial growth of functional materials using a substrate with a graphene layer is a highly desirable method for improving structural quality and obtaining free-standing epitaxial nano-membranes for scientific study, applications, and economical reuse of substrates. However, the aggressive oxidizing conditions typically employed to grow epitaxial perovskite oxides can damage graphene. Here, w… ▽ More The epitaxial growth of functional materials using a substrate with a graphene layer is a highly desirable method for improving structural quality and obtaining free-standing epitaxial nano-membranes for scientific study, applications, and economical reuse of substrates. However, the aggressive oxidizing conditions typically employed to grow epitaxial perovskite oxides can damage graphene. Here, we demonstrate a technique based on hybrid molecular beam epitaxy that does not require an independent oxygen source to achieve epitaxial growth of complex oxides without damaging the underlying graphene. The technique produces films with self-regulating cation stoichiometry control and epitaxial orientation to the oxide substrate. Furthermore, the films can be exfoliated and transferred to foreign substrates while leaving the graphene on the original substrate. These results open the door to future studies of previously unattainable free-standing nano-membranes grown in an adsorption-controlled manner by hybrid molecular beam epitaxy, and has potentially important implications for the commercial application of perovskite oxides in flexible electronics. △ Less

Submitted 17 June, 2022; originally announced June 2022.

Comments: 20 pages, 6 figures

An End-to-End Solution for Named Entity Recognition in eCommerce Search

Authors: Xiang Cheng, Mitchell Bowden, Bhushan Ramesh Bhange, Priyanka Goyal, Thomas Packer, Faizan Javed

Abstract: Named entity recognition (NER) is a critical step in modern search query understanding. In the domain of eCommerce, identifying the key entities, such as brand and product type, can help a search engine retrieve relevant products and therefore offer an engaging shop** experience. Recent research shows promising results on shared benchmark NER tasks using deep learning methods, but there are stil… ▽ More Named entity recognition (NER) is a critical step in modern search query understanding. In the domain of eCommerce, identifying the key entities, such as brand and product type, can help a search engine retrieve relevant products and therefore offer an engaging shop** experience. Recent research shows promising results on shared benchmark NER tasks using deep learning methods, but there are still unique challenges in the industry regarding domain knowledge, training data, and model production. This paper demonstrates an end-to-end solution to address these challenges. The core of our solution is a novel model training framework "TripleLearn" which iteratively learns from three separate training datasets, instead of one training set as is traditionally done. Using this approach, the best model lifts the F1 score from 69.5 to 93.3 on the holdout test data. In our offline experiments, TripleLearn improved the model performance compared to traditional training approaches which use a single set of training data. Moreover, in the online A/B test, we see significant improvements in user engagement and revenue conversion. The model has been live on homedepot.com for more than 9 months, boosting search conversions and revenue. Beyond our application, this TripleLearn framework, as well as the end-to-end process, is model-independent and problem-independent, so it can be generalized to more industrial applications, especially to the eCommerce industry which has similar data foundations and problems. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: Accepted by AAAI IAAI-2021 Highly Innovative Applications of AI track

Hole-Induced Electronic and Optical Transitions in La1-xSrxFeO3 Epitaxial Thin Films

Authors: Le Wang, Yingge Du, Peter V. Sushko, Mark E. Bowden, Kelsey A. Stoerzinger, Steven M. Heald, Mark. D. Scafetta, Tiffany C. Kaspar, Scott. A Chambers

Abstract: We have investigated the electronic and optical properties of epitaxial La1-xSrxFeO3 for x from 0 to 1 prepared by molecular beam epitaxy. Core-level and valence-band x-ray photoemission features monotonically shift to lower binding energy with increasing x, indicating downward movement of the Fermi level toward to the valence band maximum. Both Fe 2p and O 1s spectra broaden to higher binding ene… ▽ More We have investigated the electronic and optical properties of epitaxial La1-xSrxFeO3 for x from 0 to 1 prepared by molecular beam epitaxy. Core-level and valence-band x-ray photoemission features monotonically shift to lower binding energy with increasing x, indicating downward movement of the Fermi level toward to the valence band maximum. Both Fe 2p and O 1s spectra broaden to higher binding energy with increasing x, consistent with delocalization of Sr-induced holes in the Fe 3d/O 2p hybridized valence band. Combining X-ray valence band photoemission and O K-edge x-ray absorption data, we map the evolution of the occupied and unoccupied bands and observe a narrowing of the gap, along with a transfer of state density from just below to just above the Fermi level, resulting from hole do**. In-plane transport measurements confirm that the material becomes a p-type semiconductor at lower do** levels and exhibits a insulator-to-metal transition at x equal to 1. Sub-gap optical transitions revealed by spectroscopic ellipsometry are explained based on insight from theoretical densities of states and first-principles calculations of optical absorption spectra. △ Less

Submitted 27 November, 2018; originally announced November 2018.

Journal ref: Phys. Rev. Materials 3, 025401 (2019)

Charge transfer and tunable built-in electric fields across semiconductor-crystalline oxide interfaces

Authors: Zheng Hui Lim, Nicholas F. Quackenbush, Aubrey Penn, Matthew Chrysler, Mark Bowden, Zihua Zhu, James M. Ablett, Tien-lin Lee, James M. LeBeau, Joseph C. Woicik, Peter V. Sushko, Scott A. Chambers, Joseph H. Ngai

Abstract: Built-in electric fields across heterojunctions between semiconducting materials underpin the functionality of modern device technologies. Heterojunctions between semiconductors and epitaxially grown crystalline oxides provide a rich setting in which built-in fields can be explored. Here, we present an electrical transport and hard X-ray photoelectron spectroscopy study of epitaxial SrNbxTi1-xO3-δ… ▽ More Built-in electric fields across heterojunctions between semiconducting materials underpin the functionality of modern device technologies. Heterojunctions between semiconductors and epitaxially grown crystalline oxides provide a rich setting in which built-in fields can be explored. Here, we present an electrical transport and hard X-ray photoelectron spectroscopy study of epitaxial SrNbxTi1-xO3-δ / Si heterojunctions. A non-monotonic anomaly in the sheet resistance is observed near room temperature, which is accompanied by a crossover in sign of the Hall resistance. The crossover is consistent with the formation of a hole gas in the Si and the presence of a built-in field. Hard X-ray photoelectron spectroscopy measurements reveal pronounced asymmetric features in both the SrNbxTi1-xO3-δ and Si core-level spectra that we show arise from built-in fields. The extended probe depth of hard X-ray photoelectron spectroscopy enables band bending across the SrNbxTi1-xO3-δ / Si heterojunction to be spatially mapped. Band alignment at the interface and surface depletion in SrNbxTi1-xO3-δ are implicated in the formation of the hole gas and built-in fields. Control of charge transfer and built-in electric fields across semiconductor-crystalline oxide interfaces opens a pathway to novel functional heterojunctions. △ Less

Submitted 10 October, 2018; originally announced October 2018.

Layer-resolved band bending at the n-SrTiO3(001)/p-Ge(001) interface

Authors: Y. Du, P. V. Sushko, S. R. Spurgeon, M. E. Bowden, J. M. Ablett, T. -L. Lee, N. F. Quackenbush, J. C. Woicik, S. A. Chambers

Abstract: The electronic properties of epitaxial heterojunctions consisting of the prototypical perovskite oxide semiconductor,n-SrTiO3 and the high-mobility Group IV semiconductor p-Ge have been investigated. Hard x-ray photoelectron spectroscopy with a new method of analysis has been used to determine band alignment while at the same time quantifying a large built-in potential found to be present within t… ▽ More The electronic properties of epitaxial heterojunctions consisting of the prototypical perovskite oxide semiconductor,n-SrTiO3 and the high-mobility Group IV semiconductor p-Ge have been investigated. Hard x-ray photoelectron spectroscopy with a new method of analysis has been used to determine band alignment while at the same time quantifying a large built-in potential found to be present within the Ge. Accordingly, the built-in potential within the Ge has been mapped in a layer-resolved fashion. Electron transfer from donors in the n-SrTiO3 to the p-Ge creates a space-charge region in the Ge resulting in downward band bending which spans most of the Ge gap. This strong downward band bending facilitates visible-light, photo-generated electron transfer from Ge to STO, favorable to drive the hydrogen evolution reaction associated with water splitting. Ti 2p and Sr 3d core-level line shapes reveal that the STO bands are flat despite the space-charge layer therein. Inclusion of the effect of Ge band bending on band alignment is significant, amounting to a ~0.4 eV reduction in valence band offset compared to the value resulting from using spectra averaged over all layers. Density functional theory allows candidate interface structural models deduced from scanning transmission electron microscopy images to be simulated and structurally optimized. These structures are used to generate multi-slice simulations that reproduce the experimental images quite well. The calculated band offsets for these structures are in good agreement with experiment. △ Less

Submitted 13 August, 2018; originally announced August 2018.

Comments: 29 pages, 10 figures

Journal ref: Phys. Rev. Materials 2, 094602 (2018)

Interface properties and built-in potential profile of a LaCrO$_3$/SrTiO$_3$ superlattice determined by standing-wave excited photoemission spectroscopy

Authors: Shih-Chieh Lin, Cheng-Tai Kuo, Ryan B. Comes, Julien E. Rault, Jean-Pascal Rueff, Slavomir Nemšák, Amina Taleb, Jeffrey B. Kortright, Julia Meyer-Ilse, Eric Gullikson, Peter V. Sushko, Steven R. Spurgeon, Mathias Gehlmann, Mark E. Bowden, Lukasz Plucinski, Scott A. Chambers, Charles S. Fadley

Abstract: LaCrO$_3$ (LCO) / SrTiO$_3$ (STO) heterojunctions are intriguing due to a polar discontinuity along (001), two distinct and controllable interface structures [(LaO)$^+$/(TiO$_2$)$^0$ and (SrO)$^0$/(CrO$_2$)$^-$], and interface-induced polarization. In this study, we have used soft- and hard x-ray standing-wave excited photoemission spectroscopy (SW-XPS) to generate a quantitative determination of… ▽ More LaCrO$_3$ (LCO) / SrTiO$_3$ (STO) heterojunctions are intriguing due to a polar discontinuity along (001), two distinct and controllable interface structures [(LaO)$^+$/(TiO$_2$)$^0$ and (SrO)$^0$/(CrO$_2$)$^-$], and interface-induced polarization. In this study, we have used soft- and hard x-ray standing-wave excited photoemission spectroscopy (SW-XPS) to generate a quantitative determination of the elemental depth profiles and interface properties, band alignments, and the depth distribution of the interface-induced built-in potentials in the two constituent oxides. We observe an alternating charged interface configuration: a positively charged (LaO)$^+$/(TiO$_2$)$^0$ intermediate layer at the LCO$_\textbf{top}$/STO$_\textbf{bottom}$ interface and a negatively charged (SrO)$^0$/(CrO$_2$)$^-$ intermediate layer at the STO$_\textbf{top}$/LCO$_\textbf{bottom}$ interface. Using core-level SW data, we have determined the depth distribution of species, including through the interfaces, and these results are in excellent agreement with scanning transmission electron microscopy and electron energy loss spectroscopy (STEM-EELS) map** of local structure and composition. SW-XPS also enabled deconvolution of the LCO-contributed and STO- contributed matrix-element-weighted density of states (MEWDOSs) from the valence band (VB) spectra for the LCO/STO superlattice (SL). Monitoring the VB edges of the deconvoluted MEWDOS shifts with a change in probing profile, the alternating charge- induced built-in potentials are observed in both constituent oxides. Finally, using a two-step simulation approach involving first core-level binding energy shifts and then valence-band modeling, the built-in potential gradients across the SL are resolved in detail and represented by the depth distribution of VB edges. △ Less

Submitted 31 August, 2018; v1 submitted 27 February, 2018; originally announced February 2018.

Comments: Main text: 29 pages, 5 figures; Supplementary Information: 20 pages, 10 figures

Journal ref: Phys. Rev. B 98, 165124 (2018)

Ferroelectric metal-oxide-semiconductor capacitors using ultrathin single crystalline SrZrxTi1-xO3

Authors: Reza M. Moghadam, Zhiyong Xiao, Kamyar Ahmadi-Majlan, Everett D. Grimley, Mark Bowden, Phuong-Vu Ong, Scott A. Chambers, James M. Lebeau, Xia Hong, Peter V. Sushko, Joseph H. Ngai

Abstract: The epitaxial growth of multifunctional oxides on semiconductors has opened a pathway to introduce new functionalities to semiconductor device technologies. In particular, ferroelectric materials integrated on semiconductors could lead to low-power field-effect devices that can be used for logic and memory. Essential to realizing such field-effect devices is the development of ferroelectric metal-… ▽ More The epitaxial growth of multifunctional oxides on semiconductors has opened a pathway to introduce new functionalities to semiconductor device technologies. In particular, ferroelectric materials integrated on semiconductors could lead to low-power field-effect devices that can be used for logic and memory. Essential to realizing such field-effect devices is the development of ferroelectric metal-oxide-semiconductor (MOS) capacitors, in which the polarization of a ferroelectric gate is coupled to the surface potential of a semiconducting channel. Here we demonstrate that ferroelectric MOS capacitors can be realized using single crystalline SrZrxTi1-xO3 (x = 0.7) that has been epitaxially grown on Ge. We find that the ferroelectric properties of SrZrxTi1-xO3 are exceptionally robust, as gate layers as thin as 5 nm corresponding to an equivalent-oxide-thickness of just 1.0 nm exhibit a ~ 2 V hysteretic window in the capacitance-voltage characteristics. The development of ferroelectric MOS capacitors with nanoscale gate thicknesses opens new vistas for nanoelectronic devices. △ Less

Submitted 28 February, 2017; originally announced March 2017.

Interface-induced Polarization in SrTiO$_3$-LaCrO$_3$ Superlattices

Authors: Ryan B. Comes, Steven R. Spurgeon, Steve M. Heald, Despoina M. Kepaptsoglou, Lewys Jones, Phuong Vu Ong, Mark E. Bowden, Quentin M. Ramasse, Peter V. Sushko, Scott A. Chambers

Abstract: Epitaxial interfaces and superlattices comprised of polar and non-polar perovskite oxides have generated considerable interest because they possess a range of desirable properties for functional devices. In this work, emergent polarization in superlattices of SrTiO$_3$ (STO) and LaCrO$_3$ (LCO) is demonstrated. By controlling the interfaces between polar LCO and non-polar STO, polarization is indu… ▽ More Epitaxial interfaces and superlattices comprised of polar and non-polar perovskite oxides have generated considerable interest because they possess a range of desirable properties for functional devices. In this work, emergent polarization in superlattices of SrTiO$_3$ (STO) and LaCrO$_3$ (LCO) is demonstrated. By controlling the interfaces between polar LCO and non-polar STO, polarization is induced throughout the STO layers of the superlattice. Using x-ray absorption near-edge spectroscopy and aberration-corrected scanning transmission electron microscopy displacements of the Ti cations off-center within TiO6 octahedra along the superlattice growth direction are measured. This distortion gives rise to built-in potential gradients within the STO and LCO layers, as measured by in situ x-ray photoelectron spectroscopy. Density functional theory models explain the mechanisms underlying this behavior, revealing the existence of both an intrinsic polar distortion and a built-in electric field, which are due to alternately positively and negatively charged interfaces in the superlattice. This study paves the way for controllable polarization for carrier separation in multilayer materials and highlights the crucial role that interface structure plays in governing such behavior. △ Less

Submitted 8 April, 2016; originally announced April 2016.

Comments: 19 pages, 3 figures, supplement: 13 pages, 7 figures, Advanced Materials Interfaces, Early View, 2016

First measurement of muon-neutrino disappearance in NOvA

Authors: P. Adamson, C. Ader, M. Andrews, N. Anfimov, I. Anghel, K. Arms, E. Arrieta-Diaz, A. Aurisano, D. Ayres, C. Backhouse, M. Baird, B. A. Bambah, K. Bays, R. Bernstein, M. Betancourt, V. Bhatnagar, B. Bhuyan, J. Bian, K. Biery, T. Blackburn, V. Bocean, D. Bogert, A. Bolshakova, M. Bowden, C. Bower , et al. (235 additional authors not shown)

Abstract: This paper reports the first measurement using the NOvA detectors of $ν_μ$ disappearance in a $ν_μ$ beam. The analysis uses a 14 kton-equivalent exposure of $2.74 \times 10^{20}$ protons-on-target from the Fermilab NuMI beam. Assuming the normal neutrino mass hierarchy, we measure $Δm^{2}_{32}=(2.52^{+0.20}_{-0.18})\times 10^{-3}$ eV$^{2}$ and $\sin^2θ_{23}$ in the range 0.38-0.65, both at the 68%… ▽ More This paper reports the first measurement using the NOvA detectors of $ν_μ$ disappearance in a $ν_μ$ beam. The analysis uses a 14 kton-equivalent exposure of $2.74 \times 10^{20}$ protons-on-target from the Fermilab NuMI beam. Assuming the normal neutrino mass hierarchy, we measure $Δm^{2}_{32}=(2.52^{+0.20}_{-0.18})\times 10^{-3}$ eV$^{2}$ and $\sin^2θ_{23}$ in the range 0.38-0.65, both at the 68% confidence level, with two statistically-degenerate best fit points at $\sin^2θ_{23} = $ 0.43 and 0.60. Results for the inverted mass hierarchy are also presented. △ Less

Submitted 20 January, 2016; v1 submitted 19 January, 2016; originally announced January 2016.

Comments: 8 pages, 6 figures. Submitted to Phys. Rev. D Rapid Communications

Journal ref: Phys. Rev. D 93 051104 2016

First measurement of electron neutrino appearance in NOvA

Authors: P. Adamson, C. Ader, M. Andrews, N. Anfimov, I. Anghel, K. Arms, E. Arrieta-Diaz, A. Aurisano, D. S. Ayres, C. Backhouse, M. Baird, B. A. Bambah, K. Bays, R. Bernstein, M. Betancourt, V. Bhatnagar, B. Bhuyan, J. Bian, K. Biery, T. Blackburn, V. Bocean, D. Bogert, A. Bolshakova, M. Bowden, C. Bower , et al. (235 additional authors not shown)

Abstract: We report results from the first search for $ν_μ\toν_e$ transitions by the NOvA experiment. In an exposure equivalent to $2.74\times10^{20}$ protons-on-target in the upgraded NuMI beam at Fermilab, we observe 6 events in the Far Detector, compared to a background expectation of $0.99\pm0.11$ (syst.) events based on the Near Detector measurement. A secondary analysis observes 11 events with a backg… ▽ More We report results from the first search for $ν_μ\toν_e$ transitions by the NOvA experiment. In an exposure equivalent to $2.74\times10^{20}$ protons-on-target in the upgraded NuMI beam at Fermilab, we observe 6 events in the Far Detector, compared to a background expectation of $0.99\pm0.11$ (syst.) events based on the Near Detector measurement. A secondary analysis observes 11 events with a background of $1.07\pm0.14$ (syst.). The $3.3σ$ excess of events observed in the primary analysis disfavors $0.1π< δ_{CP} < 0.5π$ in the inverted mass hierarchy at the 90% C.L. △ Less

Submitted 2 May, 2016; v1 submitted 19 January, 2016; originally announced January 2016.

Comments: 7 pages, 4 figures. Minor updates to match version accepted by journal

Report number: FERMILAB-PUB-15-262-ND

Journal ref: Phys. Rev. Lett. 116, 151806 (2016)

Iso-oriented monolayer α-MoO3(010) films epitaxially grown on SrTiO3(001)

Authors: Yingge Du, Guoqiang Li, Erik W. Peterson, **g Zhou, Xin Zhang, Rentao Mu, Zdenek Dohnálek, Mark Bowden, Igor Lyubinetsky, Scott A. Chambers

Abstract: The ability to synthesis well-ordered two-dimensional materials under ultra-high vacuum and directly characterize them by other techniques in-situ can greatly advance our current understanding on their physical and chemical properties. In this paper, we demonstrate that iso-oriented α-MoO3 films with as low as single monolayer thickness can be reproducibly grown on SrTiO3(001) (STO) substrates by… ▽ More The ability to synthesis well-ordered two-dimensional materials under ultra-high vacuum and directly characterize them by other techniques in-situ can greatly advance our current understanding on their physical and chemical properties. In this paper, we demonstrate that iso-oriented α-MoO3 films with as low as single monolayer thickness can be reproducibly grown on SrTiO3(001) (STO) substrates by molecular beam epitaxy ( (010)MoO3 || (001)STO, [100]MoO3 || [100]STO or [010]STO) through a self-limiting process. While one in-plane lattice parameter of the MoO3 is very close to that of the SrTiO3 (aMoO3 = 3.96 Å, aSTO = 3.905 Å), the lattice mismatch along other direction is large (~5%, cMoO3 = 3.70 Å), which leads to relaxation as clearly observed from the splitting of streaks in reflection high-energy electron diffraction (RHEED) patterns. A narrow range in the growth temperature is found to be optimal for the growth of monolayer α-MoO3 films. Increasing deposition time will not lead to further increase in thickness, which is explained by a balance between deposition and thermal desorption due to the weak van der Waals force between α-MoO3 layers. Lowering growth temperature after the initial iso-oriented α-MoO3 monolayer leads to thicker α-MoO3(010) films with excellent crystallinity. △ Less

Submitted 6 November, 2015; originally announced November 2015.

Comments: One supporting figure is attached at the end of the manuscript

Infrared Optical Absorption in Low-spin Fe$^{2+}$-doped SrTiO${}_{3}$

Authors: Ryan B. Comes, Tiffany C. Kaspar, Steve M. Heald, Mark E. Bowden, Scott A. Chambers

Abstract: Band gap engineering in SrTiO${}_{3}$ and related titanate perovskites has long been explored due to the intriguing properties of the materials for photocatalysis and photovoltaic applications. A popular approach in the materials chemistry community is to substitutionally dope aliovalent transition metal ions onto the B site in the lattice to alter the valence band. However, in such a scheme there… ▽ More Band gap engineering in SrTiO${}_{3}$ and related titanate perovskites has long been explored due to the intriguing properties of the materials for photocatalysis and photovoltaic applications. A popular approach in the materials chemistry community is to substitutionally dope aliovalent transition metal ions onto the B site in the lattice to alter the valence band. However, in such a scheme there is limited control over the dopant valence, and compensating defects often form. Here we demonstrate a novel technique to controllably synthesize Fe$^{2+}$- and Fe$^{3+}$-doped SrTiO${}_{3}$ thin films without formation of compensating defects by co-do** with La$^{3+}$ ions on the A site. We stabilize Fe$^{2+}$-doped films by do** with two La ions for every Fe dopant, and find that the Fe ions exhibit a low-spin electronic configuration, producing optical transitions in the near infrared regime and degenerate do**. The novel electronic states observed here offer a new avenue for band gap engineering in perovskites for photocatalytic and photovoltaic applications. △ Less

Submitted 20 October, 2015; originally announced October 2015.

Comments: 19 pages, 6 figures; supplemental information: 7 pages, 6 figures

Journal ref: J. Phys.: Condens. Matter 28, 035901 (2016)

Hole-induced insulator-to-metal transition in La1-xSrxCrO3 epitaxial films

Authors: K. H. L Zhang, Y. Du, P. V. Sushko, M. E. Bowden, V. Shutthanandan, S. Sallis, L. F. J. Piper, S. A. Chambers

Abstract: We have investigated the evolution of the electronic properties of La1-xSrxCrO3 (for the full range of x) epitaxial films deposited by molecular beam epitaxy (MBE) using x-ray diffraction, x-ray photoemission spectroscopy, Rutherford backscattering spectrometry, x-ray absorption spectroscopy, electrical transport, and ab initio modeling. LaCrO3 is an antiferromagnetic insulator whereas SrCrO3 is a… ▽ More We have investigated the evolution of the electronic properties of La1-xSrxCrO3 (for the full range of x) epitaxial films deposited by molecular beam epitaxy (MBE) using x-ray diffraction, x-ray photoemission spectroscopy, Rutherford backscattering spectrometry, x-ray absorption spectroscopy, electrical transport, and ab initio modeling. LaCrO3 is an antiferromagnetic insulator whereas SrCrO3 is a metal. Substituting Sr2+ for La3+ in LaCrO3 effectively dopes holes into the top of valence band, leading to Cr4+ (3d2) local electron configurations. Core-level and valence-band features monotonically shift to lower binding energy with increasing x, indicating downward movement of the Fermi level toward the valence band maximum. The material becomes a p-type semiconductor at lower do** levels and an insulator-to-metal transition is observed at x greater than or equal to 0.65, but only when the films are deposited with in-plane compression via lattice-mismatched heteroepitaxy. Valence band x-ray photoemission spectroscopy reveals diminution of electronic state density at the Cr 3d t2g-derived top of the valence band while O K-edge x-ray absorption spectroscopy shows the development of a new unoccupied state above the Fermi level as holes are doped into LaCrO3. The evolution of these bands with Sr concentration is accurately captured using density functional theory with a Hubbard U correction of 3.0 eV (DFT + U). Resistivity data in the semiconducting regime (x less than or equal to 0.50) do not fit perfectly well to either a polaron hop** or band conduction model, but are best interpreted in terms of a hybrid model. The activation energies extracted from these fits are well reproduced by DFT + U. △ Less

Submitted 4 February, 2015; originally announced February 2015.

Visible light carrier generation in co-doped epitaxial titanate films

Authors: Ryan B. Comes, Sergey Y. Smolin, Tiffany C. Kaspar, Ran Gao, Brent A. Apgar, Lane W. Martin, Mark E. Bowden, Jason B. Baxter, Scott A. Chambers

Abstract: Perovskite titanates such as SrTiO$_{3}$ (STO) exhibit a wide range of important functional properties, including high electron mobility, ferroelectricity, and excellent photocatalytic performance. The wide optical band gap of titanates limits their use in these applications, however, making them ill-suited for integration into solar energy harvesting technologies. Our recent work has shown that b… ▽ More Perovskite titanates such as SrTiO$_{3}$ (STO) exhibit a wide range of important functional properties, including high electron mobility, ferroelectricity, and excellent photocatalytic performance. The wide optical band gap of titanates limits their use in these applications, however, making them ill-suited for integration into solar energy harvesting technologies. Our recent work has shown that by do** STO with equal concentrations of La and Cr we can enhance visible light absorption in epitaxial thin films while avoiding any compensating defects. In this work, we explore the optical properties of photoexcited carriers in these films. Using spectroscopic ellipsometry, we show that the Cr$^{3+}$ dopants, which produce electronic states immediately above the top of the O 2p valence band in STO reduce the direct band gap of the material from 3.75 eV to between 2.4 and 2.7 eV depending on do** levels. Transient reflectance spectroscopy measurements are in agreement with the observations from ellipsometry and confirm that optically generated carriers are present for longer than 2 ns. Finally, through photoelectrochemical methylene blue degradation measurements, we show that these co-doped films exhibit enhanced visible light photocatalysis when compared to pure STO. △ Less

Submitted 28 January, 2015; originally announced January 2015.

Comments: 19 pages including supplement, 8 figures (3 main, 5 supplement)

Journal ref: Applied Physics Letters, 106, 092901 (2015)

Mu2e Technical Design Report

Authors: L. Bartoszek, E. Barnes, J. P. Miller, J. Mott, A. Palladino, J. Quirk, B. L. Roberts, J. Crnkovic, V. Polychronakos, V. Tishchenko, P. Yamin, C. -h. Cheng, B. Echenard, K. Flood, D. G. Hitlin, J. H. Kim, T. S. Miyashita, F. C. Porter, M. Röhrken, J. Trevor, R. -Y. Zhu, E. Heckmaier, T. I. Kang, G. Lim, W. Molzon , et al. (238 additional authors not shown)

Abstract: The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the L… ▽ More The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the preliminary design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2 approval. △ Less

Submitted 16 March, 2015; v1 submitted 21 January, 2015; originally announced January 2015.

Comments: compressed file, 888 pages, 621 figures, 126 tables; full resolution available at http://mu2e.fnal.gov; corrected typo in background summary, Table 3.4

Report number: Fermilab-TM-2594 , Fermilab-DESIGN-2014-1

Band-gap engineering at a semiconductor - crystalline oxide interface

Authors: J. Moghadam, K. Ahmadi-Majlan, X. Shen, T. Droubay, M. Bowden, M. Chrysler, D. Su, S. A. Chambers, J. H. Ngai

Abstract: The epitaxial growth of crystalline oxides on semiconductors provides a pathway to introduce new functionalities to semiconductor devices. Key to electrically coupling crystalline oxides with semiconductors to realize functional behavior is controlling the manner in which their bands align at interfaces. Here we apply principles of band gap engineering traditionally used at heterojunctions between… ▽ More The epitaxial growth of crystalline oxides on semiconductors provides a pathway to introduce new functionalities to semiconductor devices. Key to electrically coupling crystalline oxides with semiconductors to realize functional behavior is controlling the manner in which their bands align at interfaces. Here we apply principles of band gap engineering traditionally used at heterojunctions between conventional semiconductors to control the band offset between a single crystalline oxide and a semiconductor. Reactive molecular beam epitaxy is used to realize atomically abrupt and structurally coherent interfaces between SrZr$_{x}$Ti$_{1-x}$O$_3$ and Ge, in which the band-gap of the former is enhanced with Zr content $x$. We present structural and electrical characterization of SrZr$_{x}$Ti$_{1-x}$O$_3$-Ge heterojunctions for $x$ = 0.2 to 0.75 and demonstrate the band offset can be tuned from type-II to type-I, with the latter being verified using photoemission measurements. The type-I band offset provides a platform to integrate the dielectric, ferroelectric and ferromagnetic functionalities of oxides with semiconducting devices. △ Less

Submitted 27 October, 2014; originally announced October 2014.

Mu2e Conceptual Design Report

Authors: The Mu2e Project, Collaboration, :, R. J. Abrams, D. Alezander, G. Ambrosio, N. Andreev, C. M. Ankenbrandt, D. M. Asner, D. Arnold, A. Artikov, E. Barnes, L. Bartoszek, R. H. Bernstein, K. Biery, V. Biliyar, R. Bonicalzi, R. Bossert, M. Bowden, J. Brandt, D. N. Brown, J. Budagov, M. Buehler, A. Burov, R. Carcagno , et al. (203 additional authors not shown)

Abstract: Mu2e at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe… ▽ More Mu2e at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the conceptual design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-1 approval, which was granted July 11, 2012. △ Less

Submitted 29 November, 2012; originally announced November 2012.

Comments: 562 pages, 339 figures

Report number: Fermilab-TM-2545

Cation nonstoichiometry and its impact on nucleation, structure and defect formation in complex oxide heteroepitaxy : LaCrO3 on SrTiO3(001)

Authors: L. Qiao, K. H. L. Zhang, M. E. Bowden, V. Shutthanandan, R. Colby, Y. Du, B. Kabius, P. V. Sushko, S. A. Chambers

Abstract: Our ability to design and fabricate electronic devices with reproducible properties using complex oxides is critically dependent on our ability to controllably synthesize these materials in thin-film form. Structure-property relationships are intimately tied to film and interface composition. Here we report on the effects of cation stoichiometry in LaCrO3 heteroepitaxial films prepared using molec… ▽ More Our ability to design and fabricate electronic devices with reproducible properties using complex oxides is critically dependent on our ability to controllably synthesize these materials in thin-film form. Structure-property relationships are intimately tied to film and interface composition. Here we report on the effects of cation stoichiometry in LaCrO3 heteroepitaxial films prepared using molecular beam epitaxy. We show that LaCrO3 films grow pseudomorphically on SrTiO3(001) over a wide range of La-to-Cr atom ratios. However, the growth mode and structural quality are sensitive to the La-to-Cr ratio, with La-rich films being of considerably lower structural quality than Cr-rich films. Cation mixing occurs at the interface for all La-to-Cr ratios investigated, and is not quenched by deposition at ambient temperature. Indiffused La atoms occupy Sr sites in the substrate. The presence of defects in the SrTiO3 substrate is implicated in promoting La indiffusion by comparing the properties of LaCrO3/SrTiO3 with those of LaCrO3/Si, both prepared at ambient temperature. Additionally, pulsed laser deposition is shown to result in more extensive interfacial mixing than molecular beam epitaxy for deposition at ambient temperature on Si. △ Less

Submitted 12 November, 2012; originally announced November 2012.

Comments: 33 pages, 9 figures

Tevatron Beam Position Monitor Upgrade

Authors: G. Annala, B. Banerjee, B. Barker, T. Boes, M. Bowden, C. Briegel, G. Cancelo, G. Duerling, B. Forster, S. Foulkes, B. Haynes, B. Hendricks, T. Kasza, R. Kutschke, R. Mahlum, M. Martens, M. Olson, V. Pavlicek, L. Piccoli, P. Prieto, J. Steimel, K. Treptow, M. Votava, D. Voy, M. Wendt , et al. (2 additional authors not shown)

Abstract: This paper describes the development of a digital-based Beam Position System which was designed, developed, and adapted for the Tevatron during Collider Run II. This paper describes the development of a digital-based Beam Position System which was designed, developed, and adapted for the Tevatron during Collider Run II. △ Less

Submitted 26 September, 2012; originally announced September 2012.

Comments: 20 pp

Report number: FERMILAB-PUB-11-588-AD

Journal ref: JINST 6 (2011) T11005

A simplified and generalized treatment of DES related ciphers

Authors: Liljana Babinkostova, Alyssa M. Bowden, Andrew M. Kimball, Kameryn J. Williams

Abstract: This work is a study of DES-like ciphers where the bitwise exclusive-or (XOR) operation in the underlying Feistel network is replaced by an arbitrary group operation. We construct a two round simplified version of DES that contains all the DES components and show that its set of encryption permutations is not a group under functional composition, it is not a pure cipher and its set of encryption p… ▽ More This work is a study of DES-like ciphers where the bitwise exclusive-or (XOR) operation in the underlying Feistel network is replaced by an arbitrary group operation. We construct a two round simplified version of DES that contains all the DES components and show that its set of encryption permutations is not a group under functional composition, it is not a pure cipher and its set of encryption permutations does not generate the alternating group. We present a non-computational proof that for n\leq6 the set of n-round Feistel permutations over an arbitrary group do not constitute a group under functional composition. △ Less

Submitted 4 June, 2012; v1 submitted 25 May, 2012; originally announced May 2012.

Comments: 24 pages, 2 figures

MSC Class: 20B05; 20B30; 94A60; 11T71; 14G50 ACM Class: E.3

LaCrO3 heteroepitaxy on SrTiO3(001) by molecular beam epitaxy

Authors: L. Qiao, T. C. Droubay, M. E. Bowden, V. Shutthanandan, T. C. Kaspar, S. A. Chambers

Abstract: Stoichiometric, epitaxial LaCrO3 films have been grown on TiO2-terminated SrTiO3(001) substrates by molecular beam epitaxy using O2 as the oxidant. Film growth occurred in a layer-by-layer fashion, giving rise to structurally excellent films and surfaces which preserve the step-terrace structure of the substrate. The critical thickness is in excess of 500 Å. Near-surface Cr(III) is highly suscepti… ▽ More Stoichiometric, epitaxial LaCrO3 films have been grown on TiO2-terminated SrTiO3(001) substrates by molecular beam epitaxy using O2 as the oxidant. Film growth occurred in a layer-by-layer fashion, giving rise to structurally excellent films and surfaces which preserve the step-terrace structure of the substrate. The critical thickness is in excess of 500 Å. Near-surface Cr(III) is highly susceptible to further oxidation to Cr(V), leading to the formation of a disordered phase upon exposure to atomic oxygen. Recovery of the original epitaxial LaCrO3 phase is readily achieved by vacuum annealing. △ Less

Submitted 21 May, 2011; originally announced May 2011.

Comments: 10 pages, 4 figures

The QUaD Galactic Plane Survey II: A Compact Source Catalog

Authors: T. Culverhouse, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, P. G. Castro, S. Church, R. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, C. Pryke, R. Schwarz, C. O'Sullivan, L. Piccirillo, N. Rajguru , et al. (6 additional authors not shown)

Abstract: We present a catalog of compact sources derived from the QUaD Galactic Plane Survey. The survey covers ~800 square degrees of the inner galaxy (|b|<4 degrees) in Stokes I, Q and U parameters at 100 and 150 GHz, with angular resolution 5 and 3.5 arcminutes. 505 unique sources are identified in I, of which 239 are spatially matched between frequency bands, with 50 (216) detected at 100 (150) GHz alo… ▽ More We present a catalog of compact sources derived from the QUaD Galactic Plane Survey. The survey covers ~800 square degrees of the inner galaxy (|b|<4 degrees) in Stokes I, Q and U parameters at 100 and 150 GHz, with angular resolution 5 and 3.5 arcminutes. 505 unique sources are identified in I, of which 239 are spatially matched between frequency bands, with 50 (216) detected at 100 (150) GHz alone; 182 sources are identified as ultracompact HII (UCHII) regions. Approximating the distribution of total intensity source fluxes as a power-law, we find a slope of $γ_{S,100}=-1.8\pm0.4$ at 100 GHz, and $γ_{S,150}=-2.2\pm0.4$ at 150 GHz. Similarly, the power-law index of the source two-point angular correlation function is $γ_{θ,100}=-1.21\pm0.04$ and $γ_{θ,150}=-1.25\pm0.04$. The total intensity spectral index distribution peaks at $α_{I}\sim0.25$, indicating that dust emission is not the only source of radiation produced by these objects between 100 and 150 GHz; free-free radiation is likely significant in the 100 GHz band. Four sources are detected in polarized intensity P, of which three have matching counterparts in I. Three of the polarized sources lie close to the galactic center, Sagittarius A*, Sagittarius B2 and the Galactic Radio Arc, while the fourth is RCW 49, a bright HII region. An extended polarized source, undetected by the source extraction algorithm on account of its $\sim0.5^{\circ}$ size, is identified visually, and is an isolated example of large-scale polarized emission oriented distinctly from the bulk galactic dust polarization. △ Less

Submitted 18 December, 2010; originally announced December 2010.

Comments: 30 pages, 19 figures, two catalogs; submitted to ApJS; maps and catalogs downloadable from <http://find.spa.umn.edu/quad/quad_galactic>

The D0 Silicon Microstrip Tracker

Authors: S. N. Ahmed, R. Angstadt, M. Aoki, B. Åsman, S. Austin, L. Bagby, E. Barberis, P. Baringer, A. Bean, A. Bischoff, F. Blekman, T. A. Bolton, C. Boswell, M. Bowden, F. Browning, D. Buchholz, S. Burdin, D. Butler, H. Cease, S. Choi, A. R. Clark, J. Clutter, A. Cooper, W. E. Cooper, M. Corcoran , et al. (109 additional authors not shown)

Abstract: This paper describes the mechanical design, the readout chain, the production, testing and the installation of the Silicon Microstrip Tracker of the D0 experiment at the Fermilab Tevatron collider. In addition, description of the performance of the detector during the experiment data collection between 2001 and 2010 is provided. This paper describes the mechanical design, the readout chain, the production, testing and the installation of the Silicon Microstrip Tracker of the D0 experiment at the Fermilab Tevatron collider. In addition, description of the performance of the detector during the experiment data collection between 2001 and 2010 is provided. △ Less

Submitted 5 May, 2010; originally announced May 2010.

Report number: FERMILAB-PUB-10-101

Journal ref: Nucl.Instrum.Meth.A634:8-46,2011

The QUaD Galactic Plane Survey 1: Maps And Analysis of Diffuse Emission

Authors: T. Culverhouse, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, P. G. Castro, S. Church, R. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, R. Schwarz, C. O' Sullivan, L. Piccirillo, C. Pryke, N. Rajguru , et al. (6 additional authors not shown)

Abstract: We present a survey of ~800 square degrees of the galactic plane observed with the QUaD telescope. The primary product of the survey are maps of Stokes I, Q and U parameters at 100 and 150 GHz, with spatial resolution 5 and 3.5 arcminutes respectively. Two regions are covered, spanning approximately 245-295 and 315-5 degrees in galactic longitude l, and -4<b<+4 degrees in galactic latitude b. At 0… ▽ More We present a survey of ~800 square degrees of the galactic plane observed with the QUaD telescope. The primary product of the survey are maps of Stokes I, Q and U parameters at 100 and 150 GHz, with spatial resolution 5 and 3.5 arcminutes respectively. Two regions are covered, spanning approximately 245-295 and 315-5 degrees in galactic longitude l, and -4<b<+4 degrees in galactic latitude b. At 0.02 degree square pixel size, the median sensitivity is 74 and 107 kJy/sr at 100 GHz and 150 GHz respectively in I, and 98 and 120 kJy/sr for Q and U. In total intensity, we find an average spectral index of 2.35+/-0.01 (stat) +/- 0.02 (sys) for |b|<1 degree, indicative of emission components other than thermal dust. A comparison to published dust, synchrotron and free-free models implies an excess of emission in the 100 GHz QUaD band, while better agreement is found at 150 GHz. A smaller excess is observed when comparing QUaD 100 GHz data to WMAP 5-year W band; in this case the excess is likely due to the wider bandwidth of QUaD. Combining the QUaD and WMAP data, a two-component spectral fit to the inner galactic plane (|b|<1 degree) yields mean spectral indices of -0.32 +/- 0.03 and 2.84 +/- 0.03; the former is interpreted as a combination of the spectral indices of synchrotron, free-free and dust, while the second is attributed largely to the thermal dust continuum. In the same galactic latitude range, the polarization data show a high degree of alignment perpendicular to the expected galactic magnetic field direction, and exhibit mean polarization fraction 1.38+/-0.08 (stat) +/-0.1 (sys) % at 100 GHz and 1.70 +/- 0.06 (stat) +/- 0.1 (sys) % at 150GHz. We find agreement in polarization fraction between QUaD 100 GHz and WMAP W band, the latter giving 1.1 +/- 0.4 %. △ Less

Submitted 18 December, 2010; v1 submitted 8 January, 2010; originally announced January 2010.

Comments: 19 pages, 21 figures, accepted for publication in ApJ; new revision includes tests of spectral line contribution. The maps analyzed in this paper are available for public download at http://find.spa.umn.edu/quad/quad_galactic/

Journal ref: The Astrophysical Journal, Vol. 722, Issue 2, pp. 1057-1077 (2010)

Parameter Estimation from Improved Measurements of the CMB from QUaD

Authors: QUaD collaboration, S. Gupta, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, P. G. Castro, S. Church, T. Culverhouse, R. B. Friedman, K. Ganga, W. K. Gear, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, C. O'Sullivan, L. Piccirillo, C. Pryke, N. Rajguru , et al. (7 additional authors not shown)

Abstract: We evaluate the contribution of cosmic microwave background (CMB) polarization spectra to cosmological parameter constraints. We produce cosmological parameters using high-quality CMB polarization data from the ground-based QUaD experiment and demonstrate for the majority of parameters that there is significant improvement on the constraints obtained from satellite CMB polarization data. We split… ▽ More We evaluate the contribution of cosmic microwave background (CMB) polarization spectra to cosmological parameter constraints. We produce cosmological parameters using high-quality CMB polarization data from the ground-based QUaD experiment and demonstrate for the majority of parameters that there is significant improvement on the constraints obtained from satellite CMB polarization data. We split a multi-experiment CMB dataset into temperature and polarization subsets and show that the best-fit confidence regions for the LCDM 6-parameter cosmological model are consistent with each other, and that polarization data reduces the confidence regions on all parameters. We provide the best limits on parameters from QUaD EE/BB polarization data and we find best-fit parameters from the multi-experiment CMB dataset using the optimal pivot scale of k_p=0.013 Mpc-1 to be {omch2, ombh2, H_0, A_s, n_s, tau}= {0.113, 0.0224, 70.6, 2.29 times 10^-9, 0.960, 0.086}. △ Less

Submitted 27 May, 2010; v1 submitted 9 September, 2009; originally announced September 2009.

Comments: 7 pages, 5 figures, updated to reflect published version, minor changes to spelling and format

Journal ref: Astrophys.J.716:1040-1046, 2010

Characterization of the Millimeter-Wave Polarization of Centaurus A with QUaD

Authors: M. Zemcov, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, P. G. Castro, S. Church, T. Culverhouse, R. B. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, C. O'Sullivan, L. Piccirillo, C. Pryke, N. Rajguru , et al. (6 additional authors not shown)

Abstract: Centaurus (Cen) A represents one of the best candidates for an isolated, compact, highly polarized source that is bright at typical cosmic microwave background (CMB) experiment frequencies. We present measurements of the 4 degree by 2 degree region centered on Cen A with QUaD, a CMB polarimeter whose absolute polarization angle is known to 0.5 degrees. Simulations are performed to assess the effec… ▽ More Centaurus (Cen) A represents one of the best candidates for an isolated, compact, highly polarized source that is bright at typical cosmic microwave background (CMB) experiment frequencies. We present measurements of the 4 degree by 2 degree region centered on Cen A with QUaD, a CMB polarimeter whose absolute polarization angle is known to 0.5 degrees. Simulations are performed to assess the effect of misestimation of the instrumental parameters on the final measurement and systematic errors due to the field's background structure and temporal variability from Cen A's nuclear region are determined. The total (Q, U) of the inner lobe region is (1.00 +/- 0.07 (stat.) +/- 0.04 (sys.), -1.72 +/- 0.06 +/- 0.05) Jy at 100 GHz and (0.80 +/- 0.06 +/- 0.06, -1.40 +/- 0.07 +/- 0.08) Jy at 150 GHz, leading to polarization angles and total errors of -30.0 +/- 1.1 degrees and -29.1 +/- 1.7 degrees. These measurements will allow the use of Cen A as a polarized calibration source for future millimeter experiments. △ Less

Submitted 29 July, 2010; v1 submitted 17 August, 2009; originally announced August 2009.

Comments: 9 pages, 8 figures, v2 matches version published in ApJ

Journal ref: ApJ 710:1541-1550, 2010

Improved measurements of the temperature and polarization of the CMB from QUaD

Authors: The QUaD collaboration, M. L. Brown, P. Ade, J. Bock, M. Bowden, G. Cahill, P. G. Castro, S. Church, T. Culverhouse, R. B. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, C. O'Sullivan, L. Piccirillo, C. Pryke, N. Rajguru , et al. (7 additional authors not shown)

Abstract: We present an improved analysis of the final dataset from the QUaD experiment. Using an improved technique to remove ground contamination, we double the effective sky area and hence increase the precision of our CMB power spectrum measurements by ~30% versus that previously reported. In addition, we have improved our modeling of the instrument beams and have reduced our absolute calibration unce… ▽ More We present an improved analysis of the final dataset from the QUaD experiment. Using an improved technique to remove ground contamination, we double the effective sky area and hence increase the precision of our CMB power spectrum measurements by ~30% versus that previously reported. In addition, we have improved our modeling of the instrument beams and have reduced our absolute calibration uncertainty from 5% to 3.5% in temperature. The robustness of our results is confirmed through extensive jackknife tests and by way of the agreement we find between our two fully independent analysis pipelines. For the standard 6-parameter LCDM model, the addition of QUaD data marginally improves the constraints on a number of cosmological parameters over those obtained from the WMAP experiment alone. The impact of QUaD data is significantly greater for a model extended to include either a running in the scalar spectral index, or a possible tensor component, or both. Adding both the QUaD data and the results from the ACBAR experiment, the uncertainty in the spectral index running is reduced by ~25% compared to WMAP alone, while the upper limit on the tensor-to-scalar ratio is reduced from r < 0.48 to r < 0.33 (95% c.l). This is the strongest limit on tensors to date from the CMB alone. We also use our polarization measurements to place constraints on parity violating interactions to the surface of last scattering, constraining the energy scale of Lorentz violating interactions to < 1.5 x 10^{-43} GeV (68% c.l.). Finally, we place a robust upper limit on the strength of the lensing B-mode signal. Assuming a single flat band power between l = 200 and l = 2000, we constrain the amplitude of B-modes to be < 0.57 micro-K^2 (95% c.l.). △ Less

Submitted 29 October, 2009; v1 submitted 5 June, 2009; originally announced June 2009.

Comments: 23 pages, 19 figures, updated to reflect published version

Journal ref: Astrophys.J.705:978-999,2009

Small Angular Scale Measurements of the CMB Temperature Power Spectrum from QUaD

Authors: QUaD collaboration, R. B. Friedman, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, P. G. Castro, S. Church, T. Culverhouse, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, C. O' Sullivan, L. Piccirillo, C. Pryke, N. Rajguru , et al. (7 additional authors not shown)

Abstract: We present measurements of the cosmic microwave background (CMB) radiation temperature anisotropy in the multipole range 2000<ell<3000 from the QUaD telescope's second and third observing seasons. After masking the brightest point sources our results are consistent with the primary LCDM expectation alone. We estimate the contribution of residual (un-masked) radio point sources using a model cali… ▽ More We present measurements of the cosmic microwave background (CMB) radiation temperature anisotropy in the multipole range 2000<ell<3000 from the QUaD telescope's second and third observing seasons. After masking the brightest point sources our results are consistent with the primary LCDM expectation alone. We estimate the contribution of residual (un-masked) radio point sources using a model calibrated to our own bright source observations, and a full simulation of the source finding and masking procedure. Including this contribution slightly improves the chi^2. We also fit a standard SZ template to the bandpowers and see no strong evidence of an SZ contribution, which is as expected for sigma_8 approx 0.8. △ Less

Submitted 30 June, 2009; v1 submitted 27 January, 2009; originally announced January 2009.

Comments: 5 pages, 5 figures, updated beam model, full data release available online (see text), accepted to ApJL

Journal ref: Astrophys.J.700:L187-L191,2009

Cosmological Parameters from the QUaD CMB polarization experiment

Authors: QUaD collaboration, P. G. Castro, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, S. Church, T. Culverhouse, R. B. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, C. Pryke, R. Schwarz, C. O'Sullivan, L. Piccirillo , et al. (7 additional authors not shown)

Abstract: In this paper we present a parameter estimation analysis of the polarization and temperature power spectra from the second and third season of observations with the QUaD experiment. QUaD has for the first time detected multiple acoustic peaks in the E-mode polarization spectrum with high significance. Although QUaD-only parameter constraints are not competitive with previous results for the stan… ▽ More In this paper we present a parameter estimation analysis of the polarization and temperature power spectra from the second and third season of observations with the QUaD experiment. QUaD has for the first time detected multiple acoustic peaks in the E-mode polarization spectrum with high significance. Although QUaD-only parameter constraints are not competitive with previous results for the standard 6-parameter LCDM cosmology, they do allow meaningful polarization-only parameter analyses for the first time. In a standard 6-parameter LCDM analysis we find the QUaD TT power spectrum to be in good agreement with previous results. However, the QUaD polarization data shows some tension with LCDM. The origin of this 1 to 2 sigma tension remains unclear, and may point to new physics, residual systematics or simple random chance. We also combine QUaD with the five-year WMAP data set and the SDSS Luminous Red Galaxies 4th data release power spectrum, and extend our analysis to constrain individual isocurvature mode fractions, constraining cold dark matter density, alpha(cdmi)<0.11 (95 % CL), neutrino density, alpha(ndi)<0.26 (95 % CL), and neutrino velocity, alpha(nvi)<0.23 (95 % CL), modes. Our analysis sets a benchmark for future polarization experiments. △ Less

Submitted 7 January, 2009; originally announced January 2009.

Comments: 8 pages, 5 figures, submitted to ApJ

Journal ref: Astrophys.J.701:857-864,2009

Parity violation constraints using 2006-2007 QUaD CMB polarization spectra

Authors: QUaD Collaboration, E. Y. S. Wu, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, P. G. Castro, S. Church, T. Culverhouse, R. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, L. Piccirillo, C. Pryke, N. Rajguru , et al. (7 additional authors not shown)

Abstract: We constrain parity-violating interactions to the surface of last scattering using spectra from the QUaD experiment's second and third seasons of observations by searching for a possible systematic rotation of the polarization directions of CMB photons. We measure the rotation angle due to such a possible "cosmological birefringence" to be 0.55 deg. +/- 0.82 deg. (random) +/- 0.5 deg. (systemati… ▽ More We constrain parity-violating interactions to the surface of last scattering using spectra from the QUaD experiment's second and third seasons of observations by searching for a possible systematic rotation of the polarization directions of CMB photons. We measure the rotation angle due to such a possible "cosmological birefringence" to be 0.55 deg. +/- 0.82 deg. (random) +/- 0.5 deg. (systematic) using QUaD's 100 and 150 GHz TB and EB spectra over the multipole range 200 < l < 2000, consistent with null, and constrain Lorentz violating interactions to < 2^-43 GeV (68% confidence limit). This is the best constraint to date on electrodynamic parity violation on cosmological scales. △ Less

Submitted 1 April, 2009; v1 submitted 4 November, 2008; originally announced November 2008.

Comments: 4 pages, 2 figures, accepted to Physical Review Letters. Improved method, updated result and clarified language

Journal ref: Phys.Rev.Lett.102:161302,2009

QUaD: A High-Resolution Cosmic Microwave Background Polarimeter

Authors: QUaD collaboration, J. R. Hinderks, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, J. E. Carlstrom, P. G. Castro, S. Church, T. Culverhouse, R. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Harris, V. Haynes, B. G. Keating, J. Kovac, E. Kirby, A. E. Lange, E. Leitch, O. E. Mallie, S. Melhuish, Y. Memari , et al. (14 additional authors not shown)

Abstract: We describe the QUaD experiment, a millimeter-wavelength polarimeter designed to observe the Cosmic Microwave Background (CMB) from a site at the South Pole. The experiment comprises a 2.64 m Cassegrain telescope equipped with a cryogenically cooled receiver containing an array of 62 polarization-sensitive bolometers. The focal plane contains pixels at two different frequency bands, 100 GHz and… ▽ More We describe the QUaD experiment, a millimeter-wavelength polarimeter designed to observe the Cosmic Microwave Background (CMB) from a site at the South Pole. The experiment comprises a 2.64 m Cassegrain telescope equipped with a cryogenically cooled receiver containing an array of 62 polarization-sensitive bolometers. The focal plane contains pixels at two different frequency bands, 100 GHz and 150 GHz, with angular resolutions of 5 arcmin and 3.5 arcmin, respectively. The high angular resolution allows observation of CMB temperature and polarization anisotropies over a wide range of scales. The instrument commenced operation in early 2005 and collected science data during three successive Austral winter seasons of observation. △ Less

Submitted 29 April, 2009; v1 submitted 14 May, 2008; originally announced May 2008.

Comments: 23 pages, author list and text updated to reflect published version

Journal ref: Astrophys.J.692:1221-1246,2009

Second and third season QUaD CMB temperature and polarization power spectra

Authors: QUaD collaboration, C. Pryke, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, P. G. Castro, S. Church, T. Culverhouse, R. Friedman, K. Ganga, W. K. Gear, S. Gupta, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, Y. Memari, J. A. Murphy, A. Orlando, R. Schwarz, C. O'Sullivan, L. Piccirillo , et al. (7 additional authors not shown)

Abstract: We report results from the second and third seasons of observation with the QUaD experiment. Angular power spectra of the Cosmic Microwave Background are derived for both temperature and polarization at both 100 GHz and 150 GHz, and as cross frequency spectra. All spectra are subjected to an extensive set of jackknife tests to probe for possible systematic contamination. For the implemented data… ▽ More We report results from the second and third seasons of observation with the QUaD experiment. Angular power spectra of the Cosmic Microwave Background are derived for both temperature and polarization at both 100 GHz and 150 GHz, and as cross frequency spectra. All spectra are subjected to an extensive set of jackknife tests to probe for possible systematic contamination. For the implemented data cuts and processing technique such contamination is undetectable. We analyze the difference map formed between the 100 and 150 GHz bands and find no evidence of foreground contamination in polarization. The spectra are then combined to form a single set of results which are shown to be consistent with the prevailing LCDM model. The sensitivity of the polarization results is considerably better than that of any previous experiment -- for the first time multiple acoustic peaks are detected in the E-mode power spectrum at high significance. △ Less

Submitted 24 February, 2009; v1 submitted 14 May, 2008; originally announced May 2008.

Comments: 24 pages, 23 figures, updated to reflect published version

Journal ref: Astrophys.J.692:1247-1270,2009

First season QUaD CMB temperature and polarization power spectra

Authors: QUaD Collaboration, P. Ade, J. Bock, M. Bowden, M. L. Brown, G. Cahill, J. E. Carlstrom, P. G. Castro, S. Church, T. Culverhouse, R. Friedman, K. Ganga, W. K. Gear, J. Hinderks, J. Kovac, A. E. Lange, E. Leitch, S. J. Melhuish, J. A. Murphy, A. Orlando, R. Schwarz, C. O'Sullivan, L. Piccirillo, C. Pryke, N. Rajguru , et al. (5 additional authors not shown)

Abstract: QUaD is a bolometric CMB polarimeter sited at the South Pole, operating at frequencies of 100 and 150 GHz. In this paper we report preliminary results from the first season of operation (austral winter 2005). All six CMB power spectra are presented derived as cross spectra between the 100 and 150 GHz maps using 67 days of observation in a low foreground region of approximately 60 square degrees.… ▽ More QUaD is a bolometric CMB polarimeter sited at the South Pole, operating at frequencies of 100 and 150 GHz. In this paper we report preliminary results from the first season of operation (austral winter 2005). All six CMB power spectra are presented derived as cross spectra between the 100 and 150 GHz maps using 67 days of observation in a low foreground region of approximately 60 square degrees. This data is a small fraction of the data acquired to date. The measured spectra are consistent with the LCDM cosmological model. We perform jackknife tests which indicate that the observed signal has negligible contamination from instrumental systematics. In addition by using a frequency jackknife we find no evidence for foreground contamination. △ Less

Submitted 16 May, 2007; originally announced May 2007.

Comments: 7 pages, 5 figures, submitted to ApJ

Journal ref: Astrophys.J.674:22-28, 2008

Scientific optimization of a ground-based CMB polarization experiment

Authors: M. Bowden, A. N. Taylor, K. M. Ganga, P. A. R. Ade, J. J. Bock, G. Cahill, J. E. Carlstrom, S. E. Church, W. K. Gear, J. R. Hinderks, W. Hu, B. G. Keating, J. Kovac, A . E. Lange, E. M. Leitch, O. E. Mallie, S. J. Melhuish, J. A. Murphy, L. Piccirillo, C. Pryke, B. A. Rusholme, C. O'Sullivan, K. Thompson

Abstract: We investigate the science goals achievable with the upcoming generation of ground-based Cosmic Microwave Background polarization experiments and calculate the optimal sky coverage for such an experiment including the effects of foregrounds. We find that with current technology an E-mode measurement will be sample-limited, while a B-mode measurement will be detector-noise-limited. We conclude th… ▽ More We investigate the science goals achievable with the upcoming generation of ground-based Cosmic Microwave Background polarization experiments and calculate the optimal sky coverage for such an experiment including the effects of foregrounds. We find that with current technology an E-mode measurement will be sample-limited, while a B-mode measurement will be detector-noise-limited. We conclude that a 300 sq deg survey is an optimal compromise for a two-year experiment to measure both E and B-modes, and that ground-based polarization experiments can make an important contribution to B-mode surveys. Focusing on one particular experiment, QUaD, a proposed bolometric polarimeter operating from the South Pole, we find that a ground-based experiment can make a high significance measurement of the acoustic peaks in the E-mode spectrum, and will be able to detect the gravitational lensing signal in the B-mode spectrum. Such an experiment could also directly detect the gravitational wave component of the B-mode spectrum if the amplitude of the signal is close to current upper limits. We also investigate how a ground-based experiment can improve constraints on the cosmological parameters. We estimate that by combining two years of QUaD data with the four-year WMAP data, an optimized ground-based polarization experiment can improve constraints on cosmological parameters by a factor of two. If the foreground contamination can be reduced, the measurement of the tensor-to-scalar ratio can be improved by up to a factor of six over that obtainable from WMAP alone. △ Less

Submitted 1 March, 2004; v1 submitted 23 September, 2003; originally announced September 2003.

Comments: 17 pages, 11 figures replaced with version accepted by MNRAS

Journal ref: Mon.Not.Roy.Astron.Soc.349:321,2004

The Universality of the Quantum Fourier Transform in Forming the Basis of Quantum Computing Algorithms

Authors: Charles M. Bowden, Goong Chen, Zijian Diao, Andreas Klappenecker

Abstract: The quantum Fourier transform (QFT) is a powerful tool in quantum computing. The main ingredients of QFT are formed by the Walsh-Hadamard transform H and phase shifts P(.), both of which are 2x2 unitary matrices as operators on the two-dimensional 1-qubit space. In this paper, we show that H and P(.) suffice to generate the unitary group U(2) and, consequently, through controlled-U operations an… ▽ More The quantum Fourier transform (QFT) is a powerful tool in quantum computing. The main ingredients of QFT are formed by the Walsh-Hadamard transform H and phase shifts P(.), both of which are 2x2 unitary matrices as operators on the two-dimensional 1-qubit space. In this paper, we show that H and P(.) suffice to generate the unitary group U(2) and, consequently, through controlled-U operations and their concatenations, the entire unitary group U(2^n) on n-qubits can be generated. Since any quantum computing algorithm in an n-qubit quantum computer is based on operations by matrices in U(2^n), in this sense we have the universality of the QFT. △ Less

Submitted 31 July, 2000; originally announced July 2000.

Comments: 12 pages, 3 figures, submitted to SIAM Journal on Computing

Effects of Local Fields on Spontaneous Emission in Dielectric Media

Authors: Michael E. Crenshaw, Charles M. Bowden

Abstract: The local-field renormalization of the spontaneous emission rate in a dielectric is explicitly obtained from a fully microscopic quantum-electrodynamical, many-body derivation of Langevin-Bloch operator equations for two-level atoms embedded in an absorptive and dispersive, linear dielectric host. We find that the dielectric local-field enhancement of the spontaneous emission rate is smaller tha… ▽ More The local-field renormalization of the spontaneous emission rate in a dielectric is explicitly obtained from a fully microscopic quantum-electrodynamical, many-body derivation of Langevin-Bloch operator equations for two-level atoms embedded in an absorptive and dispersive, linear dielectric host. We find that the dielectric local-field enhancement of the spontaneous emission rate is smaller than indicated by previous studies. △ Less

Submitted 26 April, 2000; originally announced April 2000.

Novel Scheme for Universal Quantum Computation

Authors: C. M. Bowden, S. D. Pethel

Abstract: A scenario for realization of a quantum computer is proposed consisting of spatially distributed q-bits fabricated in a host structure where nuclear spin-spin coupling is mediated by laser pulse controlled electron-nuclear transferred hyperfine (superhyperfine) Fermi contact interaction. Operations illustrating entanglement, nonlocality, and quantum control logic operations are presented and dis… ▽ More A scenario for realization of a quantum computer is proposed consisting of spatially distributed q-bits fabricated in a host structure where nuclear spin-spin coupling is mediated by laser pulse controlled electron-nuclear transferred hyperfine (superhyperfine) Fermi contact interaction. Operations illustrating entanglement, nonlocality, and quantum control logic operations are presented and discussed. The notion of universality of quantum computation is introduced and the irreducible conditions are presented. It is demonstrated that the proposed generic scenario for realization of a quantum computer fulfills these conditions. △ Less

Submitted 1 December, 1999; originally announced December 1999.

Comments: 5 figures