Showing 1–16 of 16 results for author: Boutin, A

Molecular Simulation of a Zn-Triazamacrocyle Metal-Organic Frameworks Family with Extraframework Anions

Authors: Marta De Toni, François-Xavier Coudert, Selvarengan Paranthaman, Pluton Pullumbi, Anne Boutin, Alain H. Fuchs

Abstract: We report an investigation by means of adsorption experiments and molecular simulation of the behavior of a recently synthesized cationic metal-organic framework. We used a combination of quantum chemistry calculations and classical forcefield-based Grand Canonical Monte Carlo simulations to shed light onto the localization of extra-framework halogenide anions in the material. We also studied the… ▽ More We report an investigation by means of adsorption experiments and molecular simulation of the behavior of a recently synthesized cationic metal-organic framework. We used a combination of quantum chemistry calculations and classical forcefield-based Grand Canonical Monte Carlo simulations to shed light onto the localization of extra-framework halogenide anions in the material. We also studied the adsorption of small gas molecules into the pores of the material using molecular simulation and investigated the coadsorption of binary gas mixtures. △ Less

Submitted 26 April, 2019; originally announced April 2019.

Journal ref: J. Phys. Chem. C, 2012, 116 (4), 2952-2959

The Behavior of Flexible MIL-53(Al) upon CH4 and CO2 Adsorption

Authors: Anne Boutin, François-Xavier Coudert, Marie-Anne Springuel-Huet, Alexander V. Neimark, Gérard Férey, Alain H. Fuchs

Abstract: The use of the osmotic thermodynamic model, combined with a series of methane and carbon dioxide gas adsorption experiments at various temperatures, has allowed shedding some new light on the fascinating phase behavior of flexible MIL-53(Al) metal-organic frameworks. A generic temperature-loading phase diagram has been derived; it is shown that the breathing effect in MIL-53 is a very general phen… ▽ More The use of the osmotic thermodynamic model, combined with a series of methane and carbon dioxide gas adsorption experiments at various temperatures, has allowed shedding some new light on the fascinating phase behavior of flexible MIL-53(Al) metal-organic frameworks. A generic temperature-loading phase diagram has been derived; it is shown that the breathing effect in MIL-53 is a very general phenomenon, which should be observed in a limited temperature range regardless of the guest molecule. In addition, the previously proposed stress model for the structural transitions of MIL-53 is shown to be transferable from xenon to methane adsorption. The stress model also provides a theoretical framework for understanding the existence of lp/np phase mixtures at pressures close to the breathing transition pressure, without having to invoke an inhomogeneous distribution of the adsorbate in the porous sample. △ Less

Submitted 26 April, 2019; originally announced April 2019.

Journal ref: J. Phys. Chem. C, 2010, 114 (50), 22237-22244

Thermodynamics of Guest-Induced Structural Transitions in Hybrid Organic-Inorganic Frameworks

Authors: François-Xavier Coudert, Marie Jeffroy, Alain H. Fuchs, Anne Boutin, Caroline Mellot-Draznieks

Abstract: We provide a general thermodynamic framework for the understanding of guest-induced structural transitions in hybrid organic-inorganic materials. The method is based on the analysis of experimental adsorption isotherms. It allows the determination of the free energy differences between host structures involved in guest-induced transitions, especially hard to obtain experimentally. We discuss the g… ▽ More We provide a general thermodynamic framework for the understanding of guest-induced structural transitions in hybrid organic-inorganic materials. The method is based on the analysis of experimental adsorption isotherms. It allows the determination of the free energy differences between host structures involved in guest-induced transitions, especially hard to obtain experimentally. We discuss the general case of adsorption in flexible materials and show how a few key quantities, such as pore volumes and adsorption affinities, entirely determine the phenomenology of adsorption, including the occurrence of structural transitions. On the basis of adsorption thermodynamics, we then propose a taxonomy of guest-induced structural phase transitions and the corresponding isotherms. In particular, we derive generic conditions for observing a double structural transition upon adsorption, often resulting in a two-step isotherm. Finally, we show the wide applicability and the robustness of the model through three case studies of topical hybrid organic-inorganic frameworks: the hysteretic hydrogen adsorption in Co(1,4-benzenedipyrazolate), the guest-dependent gate-opening in Cu(4,4'-bipyridine)(2,5-dihydroxybenzoate)2 and the CO2-induced "breathing" of hybrid material MIL-53. △ Less

Submitted 21 April, 2019; originally announced April 2019.

Journal ref: J. Am. Chem. Soc., 2008, 130 (43), 14294-14302

Structure and Dynamics of Solvated Polymers near a Silica Surface: On the Different Roles Played by Solvent

Authors: Elsa Perrin, Martin Schoen, François-Xavier Coudert, Anne Boutin

Abstract: Whereas it is experimentally known that the inclusion of nanoparticles in hydrogels can lead to a mechanical reinforcement, a detailed molecular understanding of the adhesion mechanism is still lacking. Here we use coarse-grained molecular dynamics simulations to investigate the nature of the interface between silica surfaces and solvated polymers. We show how differences in the nature of the poly… ▽ More Whereas it is experimentally known that the inclusion of nanoparticles in hydrogels can lead to a mechanical reinforcement, a detailed molecular understanding of the adhesion mechanism is still lacking. Here we use coarse-grained molecular dynamics simulations to investigate the nature of the interface between silica surfaces and solvated polymers. We show how differences in the nature of the polymer and the polymer--solvent interactions can lead to drastically different behavior of the polymer--surface adhesion. Comparing explicit and implicit solvent models, we conclude that this effect cannot be fully described in an implicit solvent. We highlight the crucial role of polymer solvation for the adsorption of the polymer chain on the silica surface, the significant dynamics of polymer chains on the surface, and details of the modifications in the structure solvated polymer close to the interface. △ Less

Submitted 21 April, 2019; originally announced April 2019.

Journal ref: J. Phys. Chem. B, 2018, 122 (16), 4573-4582

What makes zeolitic imidazolate frameworks hydrophobic or hydrophilic? The impact of geometry and functionalization on water adsorption

Authors: Aurélie U. Ortiz, Alexy P. Freitas, Anne Boutin, Alain H. Fuchs, François-Xavier Coudert

Abstract: We demonstrate, by means of Grand Canonical Monte Carlo simulation on different members of the ZIF family, how topology, geometry, and linker functionalization drastically affect the water adsorption properties of these materials, tweaking the ZIF materials from hydrophobic to hydrophilic. We show that adequate functionalization of the linkers allows one to tune the host-guest interactions, even f… ▽ More We demonstrate, by means of Grand Canonical Monte Carlo simulation on different members of the ZIF family, how topology, geometry, and linker functionalization drastically affect the water adsorption properties of these materials, tweaking the ZIF materials from hydrophobic to hydrophilic. We show that adequate functionalization of the linkers allows one to tune the host-guest interactions, even featuring dual amphiphilic materials whose pore space features both hydrophobic and hydrophilic regions. Starting from an initially hydrophobic material (ZIF-8), various degrees of hydrophilicity could be obtained, with a gradual evolution from a type V adsorption isotherm in the liquid phase to a type I isotherm in the gas phase. This behavior is similar to what was described earlier in families of hydrophobic all-silica zeolites, with hydrophilic "defects" of various strength, such as silanol nests or the presence of extra-framework cations. △ Less

Submitted 20 April, 2019; originally announced April 2019.

Journal ref: Phys. Chem. Chem. Phys., 2014,16, 9940-9949

Prediction of flexibility of metal-organic frameworks CAU-13 and NOTT-300 by first principles molecular simulations

Authors: Aurélie U. Ortiz, Anne Boutin, François-Xavier Coudert

Abstract: Based on first principles calculations, we predict and characterize the flexibility of two aluminium-based Metal-Organic Frameworks (MOFs), CAU-13 and NOTT-300. Both materials have a wine rack topology similar to that of MIL-53(Al), the archetypal breathing MOF, yet their flexibility has not been demonstrated so far. Based on first principles calculations, we predict and characterize the flexibility of two aluminium-based Metal-Organic Frameworks (MOFs), CAU-13 and NOTT-300. Both materials have a wine rack topology similar to that of MIL-53(Al), the archetypal breathing MOF, yet their flexibility has not been demonstrated so far. △ Less

Submitted 20 April, 2019; originally announced April 2019.

Journal ref: Chem. Commun., 2014,50, 5867-5870

Heterometallic Metal-Organic Frameworks of MOF-5 and UiO-66 Families: Insight from Computational Chemistry

Authors: Fabien Trousselet, Aurélien Archereau, Anne Boutin, François-Xavier Coudert

Abstract: We study the energetic stability and structural features of bimetallic metal-organic frameworks. Such heterometallic MOFs, which can result from partial substitutions between two types of cations, can have specific physical or chemical properties used for example in catalysis or gas adsorption. We work here to provide through computational chemistry a microscopic understanding of bimetallic MOFs a… ▽ More We study the energetic stability and structural features of bimetallic metal-organic frameworks. Such heterometallic MOFs, which can result from partial substitutions between two types of cations, can have specific physical or chemical properties used for example in catalysis or gas adsorption. We work here to provide through computational chemistry a microscopic understanding of bimetallic MOFs and the distribution of cations within their structure. We develop a methodology based on a systematic study of possible cation distributions at all cation ratios by means of quantum chemistry calculations at the density functional theory level. We analyze the energies of the resulting bimetallic frameworks and correlate them with various disorder descriptors (functions of the bimetallic framework topology, regardless of exact atomic positions). We apply our methodology to two families of MOFs known for heterometallicity: MOF-5 (with divalent metal ions) and UiO-66 (with tetravalent metal ions). We observe that bimetallicity is overall more favorable for pairs of cations with sizes very close to each other, owing to a charge transfer mechanism inside secondary building units. For cation pairs with significant mutual size difference, metal mixing is globally less favorable, and the energy signifantly correlates with the coordination environment of linkers, determining their ability to adapt the mixing-induced strains. This effect is particularly strong in the UiO-66 family because of high cluster coordination number. △ Less

Submitted 19 April, 2019; originally announced April 2019.

Journal ref: J. Phys. Chem. C, 2016, 120 (43), 24885-24894

On the use of the IAST method for gas separation studies in porous materials with gate-opening behavior

Authors: Guillaume Fraux, Anne Boutin, Alain H. Fuchs, François-Xavier Coudert

Abstract: Highly flexible nanoporous materials, exhibiting for instance gate opening or breathing behavior, are often presented as candidates for separation processes due to their supposed high adsorption selectivity. But this view, based on "classical" considerations of rigid materials and the use of the Ideal Adsorbed Solution Theory (IAST), does not necessarily hold in the presence of framework deformati… ▽ More Highly flexible nanoporous materials, exhibiting for instance gate opening or breathing behavior, are often presented as candidates for separation processes due to their supposed high adsorption selectivity. But this view, based on "classical" considerations of rigid materials and the use of the Ideal Adsorbed Solution Theory (IAST), does not necessarily hold in the presence of framework deformations. Here, we revisit some results from the published literature and show how proper inclusion of framework flexibility in the osmotic thermodynamic ensemble drastically changes the conclusions, in contrast to what intuition and standard IAST would yield. In all cases, the IAST method does not reproduce the gate-opening behavior in the adsorption of mixtures, and may overestimates the selectivity by up to two orders of magnitude. △ Less

Submitted 4 July, 2018; originally announced July 2018.

Journal ref: Adsorption (2018) 24: 233

Crystallization via tubing microfluidics permits both in situ and ex situ X-ray diffraction

Authors: Charline Gerard, Gilles Ferry, Laurent Vuillard, Jean A Boutin, Léonard Chavas, Tiphaine Huet, Nathalie Ferte, Romain Grossier, Nadine Candoni, Stéphane Veesler

Abstract: We used a microfluidic platform to address the problems of obtaining diffraction quality crystals and crystal handling during transfer to the X-ray diffractometer. We optimize crystallization conditions of a pharmaceutical protein and collect X-ray data both in situ and ex situ. We used a microfluidic platform to address the problems of obtaining diffraction quality crystals and crystal handling during transfer to the X-ray diffractometer. We optimize crystallization conditions of a pharmaceutical protein and collect X-ray data both in situ and ex situ. △ Less

Submitted 22 March, 2017; originally announced April 2017.

Novel Porous Polymorphs of Zinc Cyanide with Rich Thermal and Mechanical Behavior

Authors: Fabien Trousselet, Anne Boutin, François-Xavier Coudert

Abstract: We investigate the feasibility of four-connected nets as hypothetical zinc cyanide polymorphs, as well as their thermal and mechanical properties, through quantum chemical calculations and molecular dynamics simulations. We confirm the metastability of the two porous phases recently discovered experimentally (Lapidus, S. H.; et al. J. Am. Chem. Soc. 2013, 135, 7621-7628), suggest the existence of… ▽ More We investigate the feasibility of four-connected nets as hypothetical zinc cyanide polymorphs, as well as their thermal and mechanical properties, through quantum chemical calculations and molecular dynamics simulations. We confirm the metastability of the two porous phases recently discovered experimentally (Lapidus, S. H.; et al. J. Am. Chem. Soc. 2013, 135, 7621-7628), suggest the existence of seven novel porous phases of Zn(CN)2, and show that isotropic negative thermal expansion is a common occurrence among all members of this family of materials, with thermal expansion coefficients close to that of the dense dia-c phase. In constrast, we find a wide variety in the mechanical behavior of these porous structures with framework-dependent anisotropic compressibilities. All porous structures, however, show pressure-induced softening leading to a structural transition at modest pressure. △ Less

Submitted 17 June, 2015; originally announced June 2015.

Comments: Chem. Mater. 2015

Journal ref: Chem. Mater., 2015, 27 (12), 4422-4430

Thermal and mechanical stability of zeolitic imidazolate frameworks polymorphs

Authors: Lila Bouëssel du Bourg, Aurélie U. Ortiz, Anne Boutin, François-Xavier Coudert

Abstract: Theoretical studies on the experimental feasibility of hypothetical Zeolitic Imidazolate Frameworks (ZIF) have focused so far on relative energy of various polymorphs, by energy minimization at the quantum chemical level. We present here a systematic study of stability of 18 ZIFs as a function of temperature and pressure, by molecular dynamics simulations. This approach allows us to better underst… ▽ More Theoretical studies on the experimental feasibility of hypothetical Zeolitic Imidazolate Frameworks (ZIF) have focused so far on relative energy of various polymorphs, by energy minimization at the quantum chemical level. We present here a systematic study of stability of 18 ZIFs as a function of temperature and pressure, by molecular dynamics simulations. This approach allows us to better understand the limited stability of some experimental structures upon solvent or guest removal. We also find that many of the hypothetical ZIFs proposed in the literature are not stable at room temperature. Mechanical and thermal stability criteria thus need to be considered for the prediction of new MOF structures. Finally, we predict a variety of thermal expansion behavior for ZIFs as a function of framework topology, with some materials showing large negative volume thermal expansion. △ Less

Submitted 20 June, 2016; v1 submitted 25 September, 2014; originally announced September 2014.

Journal ref: APL Materials, 2, 124110 (2014)

Challenges in first-principles NPT molecular dynamics of soft porous crystals: A case study on MIL-53(Ga)

Authors: Volker Haigis, Yacine Belkhodja, François-Xavier Coudert, Rodolphe Vuilleumier, Anne Boutin

Abstract: Soft porous crystals present a challenge to molecular dynamics simulations with flexible size and shape of the simulation cell (i.e., in the NPT ensemble), since their framework responds very sensitively to small external stimuli. Hence, all interactions have to be described very accurately in order to obtain correct equilibrium structures. Here, we report a methodological study on the nanoporous… ▽ More Soft porous crystals present a challenge to molecular dynamics simulations with flexible size and shape of the simulation cell (i.e., in the NPT ensemble), since their framework responds very sensitively to small external stimuli. Hence, all interactions have to be described very accurately in order to obtain correct equilibrium structures. Here, we report a methodological study on the nanoporous metal-organic framework MIL-53(Ga), which undergoes a large-amplitude transition between a narrow- and a large-pore phase upon a change in temperature. Since this system has not been investigated by density functional theory (DFT)-based NPT simulations so far, we carefully check the convergence of the stress tensor with respect to computational parameters. Furthermore, we demonstrate the importance of dispersion interactions and test two different ways of incorporating them into the DFT framework. As a result, we propose two computational schemes which describe accurately the narrow- and the large-pore phase of the material, respectively. These schemes can be used in future work on the delicate interplay between adsorption in the nanopores and structural flexibility of the host material. △ Less

Submitted 19 December, 2014; v1 submitted 16 September, 2014; originally announced September 2014.

Journal ref: J. Chem. Phys. 141, 064703 (2014)

Understanding Adsorption-Induced Structural Transitions in Metal-Organic Frameworks: From the Unit Cell to the Crystal

Authors: Carles Triguero, François-Xavier Coudert, Anne Boutin, Alain H. Fuchs, Alexander V. Neimark

Abstract: Breathing transitions represent recently discovered adsorption-induced structural transformations between large-pore and narrow-pore conformations in bistable metal-organic frameworks, such as MIL-53. We present a multiscale physical mechanism of the dynamics of breathing transitions. We show that due to interplay between host framework elasticity and guest molecule adsorption, these transformatio… ▽ More Breathing transitions represent recently discovered adsorption-induced structural transformations between large-pore and narrow-pore conformations in bistable metal-organic frameworks, such as MIL-53. We present a multiscale physical mechanism of the dynamics of breathing transitions. We show that due to interplay between host framework elasticity and guest molecule adsorption, these transformations on the crystal level occur via layer-by-layer shear. We construct a simple Hamiltonian that describes the physics of host-host and host-guest interactions on the level of unit cells and reduces to one effective dimension due to the long-range elastic cell-cell interactions. We then use this Hamiltonian in Monte Carlo simulations of adsorption-desorption cycles to study how the behavior of unit cells is linked to the transition mechanism at the crystal level through three key physical parameters: the transition energy barrier, the cell-cell elastic coupling, and the system size. △ Less

Submitted 17 June, 2015; v1 submitted 5 November, 2012; originally announced November 2012.

Journal ref: J. Chem. Phys. 137, 184702 (2012)

Mechanism and kinetics of hydrated electron diffusion

Authors: Kafui A. Tay, François-Xavier Coudert, Anne Boutin

Abstract: Molecular dynamics simulations are used to study the mechanism and kinetics of hydrated electron diffusion. The electron center of mass is found to exhibit Brownian-type behavior with a diffusion coefficient considerably greater than that of the solvent. As previously postulated by both experimental and theoretical works, the instantaneous response of the electron to the librational motions of sur… ▽ More Molecular dynamics simulations are used to study the mechanism and kinetics of hydrated electron diffusion. The electron center of mass is found to exhibit Brownian-type behavior with a diffusion coefficient considerably greater than that of the solvent. As previously postulated by both experimental and theoretical works, the instantaneous response of the electron to the librational motions of surrounding water molecules constitutes the principal mode of motion. The diffusive mechanism can be understood within the traditional framework of transfer diffusion processes, where the diffusive step is akin to the exchange of an extramolecular electron between neighboring water molecules. This is a second-order process with a computed rate constant of 5.0 ps^{-1} at 298 K. In agreement with experiment the electron diffusion exhibits Arrhenius behavior over the temperature range of 298-400 K. We compute an activation energy of 8.9 kJ/mol. Through analysis of Arrhenius plots and the application of a simple random walk model it is demonstrated that the computed rate constant for exchange of an excess electron is indeed the phenomenological rate constant associated with the diffusive process. △ Less

Submitted 4 November, 2012; originally announced November 2012.

Journal ref: J. Chem. Phys. 129, 054505 (2008)

Free energy landscapes for the thermodynamic understanding of adsorption-induced deformations and structural transitions in porous materials

Authors: David Bousquet, François-Xavier Coudert, Anne Boutin

Abstract: Soft porous crystals are flexible metal-organic frameworks that respond to physical stimuli such as temperature, pressure, and gas adsorption by large changes in their structure and unit cell volume. While they have attracted a lot of interest, molecular simulation methods that directly couple adsorption and large structural deformations in an efficient manner are still lacking. We propose here a… ▽ More Soft porous crystals are flexible metal-organic frameworks that respond to physical stimuli such as temperature, pressure, and gas adsorption by large changes in their structure and unit cell volume. While they have attracted a lot of interest, molecular simulation methods that directly couple adsorption and large structural deformations in an efficient manner are still lacking. We propose here a new Monte Carlo simulation method based on non-Boltzmann sampling in (guest loading, volume) space using the Wang-Landau algorithm, and show that it can be used to fully characterize the adsorption properties and the material's response to adsorption at thermodynamic equilibrium. We showcase this new method on a simple model of the MIL-53 family of breathing materials, demonstrating its potential and contrasting it with the pitfalls of direct, Boltzmann simulations. We furthermore propose an explanation for the hysteretic nature of adsorption in terms of free energy barriers between the two metastable host phases. △ Less

Submitted 18 October, 2012; originally announced October 2012.

Journal ref: J. Chem. Phys. 137, 044118 (2012)

Anisotropic Elastic Properties of Flexible Metal-Organic Frameworks: How Soft are Soft Porous Crystals?

Authors: Aurélie U. Ortiz, Anne Boutin, Alain H. Fuchs, François-Xavier Coudert

Abstract: We performed ab initio calculations of the elastic constants of five flexible metal-organic frameworks: MIL-53(Al), MIL-53(Ga), MIL-47 and the square and lozenge structures of DMOF-1. Tensorial analysis of the elastic constants reveal a highly anisotropic elastic behavior, some deformation directions exhibiting very low Young's modulus and shear modulus. This anisotropy can reach a 400:1 ratio bet… ▽ More We performed ab initio calculations of the elastic constants of five flexible metal-organic frameworks: MIL-53(Al), MIL-53(Ga), MIL-47 and the square and lozenge structures of DMOF-1. Tensorial analysis of the elastic constants reveal a highly anisotropic elastic behavior, some deformation directions exhibiting very low Young's modulus and shear modulus. This anisotropy can reach a 400:1 ratio between the most rigid and weakest directions, in stark contrast with the case of non-flexible MOFs such as MOF-5 and ZIF-8. In addition, we show that flexible MOFs can display extremely large negative linear compressibility (NLC). These results uncover the microscopic roots of stimuli-induced structural transitions in flexible MOFs, by linking the local elastic behavior of the material and its multistability. △ Less

Submitted 11 December, 2014; v1 submitted 27 September, 2012; originally announced September 2012.

Journal ref: Phys. Rev. Lett. 109, 195502 (2012)