Showing 1–28 of 28 results for author: Boucher, J

Euclid. II. The VIS Instrument

Authors: Euclid Collaboration, M. Cropper, A. Al-Bahlawan, J. Amiaux, S. Awan, R. Azzollini, K. Benson, M. Berthe, J. Boucher, E. Bozzo, C. Brockley-Blatt, G. P. Candini, C. Cara, R. A. Chaudery, R. E. Cole, P. Danto, J. Denniston, A. M. Di Giorgio, B. Dryer, J. Endicott, J. -P. Dubois, M. Farina, E. Galli, L. Genolet, J. P. D. Gow , et al. (403 additional authors not shown)

Abstract: This paper presents the specification, design, and development of the Visible Camera (VIS) on the ESA Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg^2 sampled at 0.1" with an array of 609 Megapixels and spatial resolution of 0.18". It will be used to survey approximately 14,000 deg^2 of extragalactic sky to measure the distortion of galaxies in the redshift ran… ▽ More This paper presents the specification, design, and development of the Visible Camera (VIS) on the ESA Euclid mission. VIS is a large optical-band imager with a field of view of 0.54 deg^2 sampled at 0.1" with an array of 609 Megapixels and spatial resolution of 0.18". It will be used to survey approximately 14,000 deg^2 of extragalactic sky to measure the distortion of galaxies in the redshift range z=0.1-1.5 resulting from weak gravitational lensing, one of the two principal cosmology probes of Euclid. With photometric redshifts, the distribution of dark matter can be mapped in three dimensions, and, from how this has changed with look-back time, the nature of dark energy and theories of gravity can be constrained. The entire VIS focal plane will be transmitted to provide the largest images of the Universe from space to date, reaching m_AB>24.5 with S/N >10 in a single broad I_E~(r+i+z) band over a six year survey. The particularly challenging aspects of the instrument are the control and calibration of observational biases, which lead to stringent performance requirements and calibration regimes. With its combination of spatial resolution, calibration knowledge, depth, and area covering most of the extra-Galactic sky, VIS will also provide a legacy data set for many other fields. This paper discusses the rationale behind the VIS concept and describes the instrument design and development before reporting the pre-launch performance derived from ground calibrations and brief results from the in-orbit commissioning. VIS should reach fainter than m_AB=25 with S/N>10 for galaxies of full-width half-maximum of 0.3" in a 1.3" diameter aperture over the Wide Survey, and m_AB>26.4 for a Deep Survey that will cover more than 50 deg^2. The paper also describes how VIS works with the other Euclid components of survey, telescope, and science data processing to extract the cosmological information. △ Less

Submitted 22 May, 2024; originally announced May 2024.

Comments: Paper submitted as part of the A&A special issue `Euclid on Sky', which contains Euclid key reference papers and first results from the Euclid Early Release Observations

Euclid. I. Overview of the Euclid mission

Authors: Euclid Collaboration, Y. Mellier, Abdurro'uf, J. A. Acevedo Barroso, A. Achúcarro, J. Adamek, R. Adam, G. E. Addison, N. Aghanim, M. Aguena, V. Ajani, Y. Akrami, A. Al-Bahlawan, A. Alavi, I. S. Albuquerque, G. Alestas, G. Alguero, A. Allaoui, S. W. Allen, V. Allevato, A. V. Alonso-Tetilla, B. Altieri, A. Alvarez-Candal, A. Amara, L. Amendola , et al. (1086 additional authors not shown)

Abstract: The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14… ▽ More The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14,000 deg^2 of extragalactic sky. In addition to accurate weak lensing and clustering measurements that probe structure formation over half of the age of the Universe, its primary probes for cosmology, these exquisite data will enable a wide range of science. This paper provides a high-level overview of the mission, summarising the survey characteristics, the various data-processing steps, and data products. We also highlight the main science objectives and expected performance. △ Less

Submitted 22 May, 2024; originally announced May 2024.

Comments: Paper submitted as part of the A&A special issue`Euclid on Sky'

Bonus-Malus scale premiums for tweedie's compound poisson models

Authors: Jean-Philippe Boucher, Raïssa Coulibaly

Abstract: Based on the recent paper by Delong et al. (2021), two distributions for the total claims amount (loss cost) are considered: Compound Poisson-gamma (CPG) and Tweedie. Each is used as an underlying distribution in the Bonus-Malus Scale (BMS) model described in the paper by Boucher (2023). The BMS model links the premium of an insurance contract to a function of the insurance experience of the relat… ▽ More Based on the recent paper by Delong et al. (2021), two distributions for the total claims amount (loss cost) are considered: Compound Poisson-gamma (CPG) and Tweedie. Each is used as an underlying distribution in the Bonus-Malus Scale (BMS) model described in the paper by Boucher (2023). The BMS model links the premium of an insurance contract to a function of the insurance experience of the related policy. In other words, the idea is to model the increase and the decrease in premiums for insureds that do or do not file claims. Therefore, our proposed models can be seen as a generalization of the paper of Delong et al. (2021) and an extension of the work of Boucher (2023). We applied our approach to a sample of data from a major insurance company in Canada. Data fit and predictability were analyzed. We showed that the studied models are exciting alternatives to consider from a practical point of view, and that predictive ratemaking models can address some importantpractical considerations. △ Less

Submitted 6 November, 2023; originally announced November 2023.

Comments: 23 pages, 9 figures, 10 tables

Telematics Combined Actuarial Neural Networks for Cross-Sectional and Longitudinal Claim Count Data

Authors: Francis Duval, Jean-Philippe Boucher, Mathieu Pigeon

Abstract: We present novel cross-sectional and longitudinal claim count models for vehicle insurance built upon the Combined Actuarial Neural Network (CANN) framework proposed by Mario Wüthrich and Michael Merz. The CANN approach combines a classical actuarial model, such as a generalized linear model, with a neural network. This blending of models results in a two-component model comprising a classical reg… ▽ More We present novel cross-sectional and longitudinal claim count models for vehicle insurance built upon the Combined Actuarial Neural Network (CANN) framework proposed by Mario Wüthrich and Michael Merz. The CANN approach combines a classical actuarial model, such as a generalized linear model, with a neural network. This blending of models results in a two-component model comprising a classical regression model and a neural network part. The CANN model leverages the strengths of both components, providing a solid foundation and interpretability from the classical model while harnessing the flexibility and capacity to capture intricate relationships and interactions offered by the neural network. In our proposed models, we use well-known log-linear claim count regression models for the classical regression part and a multilayer perceptron (MLP) for the neural network part. The MLP part is used to process telematics car driving data given as a vector characterizing the driving behavior of each insured driver. In addition to the Poisson and negative binomial distributions for cross-sectional data, we propose a procedure for training our CANN model with a multivariate negative binomial (MVNB) specification. By doing so, we introduce a longitudinal model that accounts for the dependence between contracts from the same insured. Our results reveal that the CANN models exhibit superior performance compared to log-linear models that rely on manually engineered telematics features. △ Less

Submitted 3 December, 2023; v1 submitted 3 August, 2023; originally announced August 2023.

Comments: 30 pages, 10 tables, 6 figures

Enhancing Claim Classification with Feature Extraction from Anomaly-Detection-Derived Routine and Peculiarity Profiles

Authors: Francis Duval, Jean-Philippe Boucher, Mathieu Pigeon

Abstract: Usage-based insurance is becoming the new standard in vehicle insurance; it is therefore relevant to find efficient ways of using insureds' driving data. Applying anomaly detection to vehicles' trip summaries, we develop a method allowing to derive a "routine" and a "peculiarity" anomaly profile for each vehicle. To this end, anomaly detection algorithms are used to compute a routine and a peculia… ▽ More Usage-based insurance is becoming the new standard in vehicle insurance; it is therefore relevant to find efficient ways of using insureds' driving data. Applying anomaly detection to vehicles' trip summaries, we develop a method allowing to derive a "routine" and a "peculiarity" anomaly profile for each vehicle. To this end, anomaly detection algorithms are used to compute a routine and a peculiarity anomaly score for each trip a vehicle makes. The former measures the anomaly degree of the trip compared to the other trips made by the concerned vehicle, while the latter measures its anomaly degree compared to trips made by any vehicle. The resulting anomaly scores vectors are used as routine and peculiarity profiles. Features are then extracted from these profiles, for which we investigate the predictive power in the claim classification framework. Using real data, we find that features extracted from the vehicles' peculiarity profile improve classification. △ Less

Submitted 26 September, 2022; originally announced September 2022.

Comments: 26 pages, 10 figures, 9 tables

How much telematics information do insurers need for claim classification?

Authors: Francis Duval, Jean-Philippe Boucher, Mathieu Pigeon

Abstract: It has been shown several times in the literature that telematics data collected in motor insurance help to better understand an insured's driving risk. Insurers that use this data reap several benefits, such as a better estimate of the pure premium, more segmented pricing and less adverse selection. The flip side of the coin is that collected telematics information is often sensitive and can ther… ▽ More It has been shown several times in the literature that telematics data collected in motor insurance help to better understand an insured's driving risk. Insurers that use this data reap several benefits, such as a better estimate of the pure premium, more segmented pricing and less adverse selection. The flip side of the coin is that collected telematics information is often sensitive and can therefore compromise policyholders' privacy. Moreover, due to their large volume, this type of data is costly to store and hard to manipulate. These factors, combined with the fact that insurance regulators tend to issue more and more recommendations regarding the collection and use of telematics data, make it important for an insurer to determine the right amount of telematics information to collect. In addition to traditional contract information such as the age and gender of the insured, we have access to a telematics dataset where information is summarized by trip. We first derive several features of interest from these trip summaries before building a claim classification model using both traditional and telematics features. By comparing a few classification algorithms, we find that logistic regression with lasso penalty is the most suitable for our problem. Using this model, we develop a method to determine how much information about policyholders' driving should be kept by an insurer. Using real data from a North American insurance company, we find that telematics data become redundant after about 3 months or 4,000 kilometers of observation, at least from a claim classification perspective. △ Less

Submitted 25 October, 2021; v1 submitted 28 May, 2021; originally announced May 2021.

Comments: 21 pages, 8 figures, 6 tables

Synthetic Dataset Generation of Driver Telematics

Authors: Banghee So, Jean-Philippe Boucher, Emiliano A. Valdez

Abstract: This article describes techniques employed in the production of a synthetic dataset of driver telematics emulated from a similar real insurance dataset. The synthetic dataset generated has 100,000 policies that included observations about driver's claims experience together with associated classical risk variables and telematics-related variables. This work is aimed to produce a resource that can… ▽ More This article describes techniques employed in the production of a synthetic dataset of driver telematics emulated from a similar real insurance dataset. The synthetic dataset generated has 100,000 policies that included observations about driver's claims experience together with associated classical risk variables and telematics-related variables. This work is aimed to produce a resource that can be used to advance models to assess risks for usage-based insurance. It follows a three-stage process using machine learning algorithms. The first stage is simulating values for the number of claims as multiple binary classifications applying feedforward neural networks. The second stage is simulating values for aggregated amount of claims as regression using feedforward neural networks, with number of claims included in the set of feature variables. In the final stage, a synthetic portfolio of the space of feature variables is generated applying an extended $\texttt{SMOTE}$ algorithm. The resulting dataset is evaluated by comparing the synthetic and real datasets when Poisson and gamma regression models are fitted to the respective data. Other visualization and data summarization produce remarkable similar statistics between the two datasets. We hope that researchers interested in obtaining telematics datasets to calibrate models or learning algorithms will find our work valuable. △ Less

Submitted 30 January, 2021; originally announced February 2021.

Comments: 24 pages, 11 figures, 6 tables

MSC Class: 62P05

Cost-sensitive Multi-class AdaBoost for Understanding Driving Behavior with Telematics

Authors: Banghee So, Jean-Philippe Boucher, Emiliano A. Valdez

Abstract: Powered with telematics technology, insurers can now capture a wide range of data, such as distance traveled, how drivers brake, accelerate or make turns, and travel frequency each day of the week, to better decode driver's behavior. Such additional information helps insurers improve risk assessments for usage-based insurance (UBI), an increasingly popular industry innovation. In this article, we… ▽ More Powered with telematics technology, insurers can now capture a wide range of data, such as distance traveled, how drivers brake, accelerate or make turns, and travel frequency each day of the week, to better decode driver's behavior. Such additional information helps insurers improve risk assessments for usage-based insurance (UBI), an increasingly popular industry innovation. In this article, we explore how to integrate telematics information to better predict claims frequency. For motor insurance during a policy year, we typically observe a large proportion of drivers with zero claims, a less proportion with exactly one claim, and far lesser with two or more claims. We introduce the use of a cost-sensitive multi-class adaptive boosting (AdaBoost) algorithm, which we call SAMME.C2, to handle such imbalances. To calibrate SAMME.C2 algorithm, we use empirical data collected from a telematics program in Canada and we find improved assessment of driving behavior with telematics relative to traditional risk variables. We demonstrate our algorithm can outperform other models that can handle class imbalances: SAMME, SAMME with SMOTE, RUSBoost, and SMOTEBoost. The sampled data on telematics were observations during 2013-2016 for which 50,301 are used for training and another 21,574 for testing. Broadly speaking, the additional information derived from vehicle telematics helps refine risk classification of drivers of UBI. △ Less

Submitted 6 July, 2020; originally announced July 2020.

Comments: 27 pages, 9 figures, 10 tables

MSC Class: 62P05

Physics of rowing oars

Authors: Romain Labbé, Jean-Philippe Boucher, Christophe Clanet, Michael Benzaquen

Abstract: In each rowing sport, the oars have their very own characteristics most of the time selected through a long time experience. Here we address experimentally and theoretically the problem of rowing efficiency as function of row lengths and blades sizes. In contrast with previous studies which consider imposed kinematics, we set an imposed force framework which is closer to human constraints. We find… ▽ More In each rowing sport, the oars have their very own characteristics most of the time selected through a long time experience. Here we address experimentally and theoretically the problem of rowing efficiency as function of row lengths and blades sizes. In contrast with previous studies which consider imposed kinematics, we set an imposed force framework which is closer to human constraints. We find that optimal row lengths and blades sizes depend on sports and athletes strength, and provide an optimisation scheme. △ Less

Submitted 11 April, 2019; originally announced April 2019.

Comments: 17 pages, 9 figures

Wave drag on asymmetric bodies

Authors: GP Benham, JP Boucher, R Labbe, M Benzaquen, C Clanet

Abstract: An asymmetric body with a sharp leading edge and a rounded trailing edge produces a smaller wave disturbance moving forwards than backwards, and this is reflected in the wave drag coefficient. This experimental fact is not captured by Michell's theory for wave drag (Michell 1898). In this study, we use a tow-tank experiment to investigate the effects of asymmetry on wave drag, and show that these… ▽ More An asymmetric body with a sharp leading edge and a rounded trailing edge produces a smaller wave disturbance moving forwards than backwards, and this is reflected in the wave drag coefficient. This experimental fact is not captured by Michell's theory for wave drag (Michell 1898). In this study, we use a tow-tank experiment to investigate the effects of asymmetry on wave drag, and show that these effects can be replicated by modifying Michell's theory to include the growth of a symmetry-breaking boundary layer. We show that asymmetry can have either a positive or a negative effect on drag, depending on the depth of motion and the Froude number. △ Less

Submitted 20 February, 2019; originally announced February 2019.

A Claim Score for Dynamic Claim Counts Modeling

Authors: Jean-Philippe Boucher, Mathieu Pigeon

Abstract: We develop a claim score based on the Bonus-Malus approach proposed by [7]. We compare the fit and predictive ability of this new model with various models for of panel count data. In particular, we study in more details a new dynamic model based on the Harvey-Fernandès (HF) approach, which gives different weight to the claims according to their date of occurrence. We show that the HF model has se… ▽ More We develop a claim score based on the Bonus-Malus approach proposed by [7]. We compare the fit and predictive ability of this new model with various models for of panel count data. In particular, we study in more details a new dynamic model based on the Harvey-Fernandès (HF) approach, which gives different weight to the claims according to their date of occurrence. We show that the HF model has serious shortcomings that limit its use in practice. In contrast, the Bonus-Malus model does not have these defects. Instead, it has several interesting properties: interpretability, computational advantages and ease of use in practice. We believe that the flexibility of this new model means that it could be used in many other actuarial contexts. Based on a real database, we show that the proposed model generates the best fit and one of the best predictive capabilities among the other models tested. △ Less

Submitted 14 December, 2018; originally announced December 2018.

Thin or bulky: optimal aspect ratios for ship hulls

Authors: Jean-Philippe Boucher, Romain Labbé, Christophe Clanet, Michael Benzaquen

Abstract: Empirical data reveals a broad variety of hull shapes among the different ship categories. We present a minimal theoretical approach to address the problem of ship hull optimisation. We show that optimal hull aspect ratios result -- at given load and propulsive power -- from a subtle balance between wave drag, pressure drag and skin friction. Slender hulls are more favourable in terms of wave drag… ▽ More Empirical data reveals a broad variety of hull shapes among the different ship categories. We present a minimal theoretical approach to address the problem of ship hull optimisation. We show that optimal hull aspect ratios result -- at given load and propulsive power -- from a subtle balance between wave drag, pressure drag and skin friction. Slender hulls are more favourable in terms of wave drag and pressure drag, while bulky hulls have a smaller wetted surface for a given immersed volume, by that reducing skin friction. We confront our theoretical results to real data and discuss discrepancies in the light of hull designer constraints, such as stability or manoeuvrability. △ Less

Submitted 22 June, 2018; v1 submitted 28 March, 2018; originally announced March 2018.

Comments: 8 pages, 7 figures, 1 table

Journal ref: Phys. Rev. Fluids 3, 074802 (2018)

Phase Diagram and Soliton Picture of an Ideal Spin-Peierls Compound D-F$_{5}$PNN

Authors: Yuji Inagaki, Tatsuya Kawae, Naoko Sakai, Naoyuki Kawame, Takao Goto, Kunio Taguma, Jun Yamauchi, Yasuo Yoshida, Yutaka Fujii, Takashi Kambe, Yuko Hosokoshi, Beatrice Grenier, Jean-Paul Boucher

Abstract: We investigate magnetic properties of an $S$=1/2 quasi-one dimensional organic antiferromagnet, D-F$_{5}$PNN using magnetization measurements taken at temperatures as low as 0.5 K. Three distinct phases were observed consisting of uniform, dimerized (D), and incommensurate (I) spin structures in the magnetic field versus temperature plane, where a significant hysteresis appears between D-I transit… ▽ More We investigate magnetic properties of an $S$=1/2 quasi-one dimensional organic antiferromagnet, D-F$_{5}$PNN using magnetization measurements taken at temperatures as low as 0.5 K. Three distinct phases were observed consisting of uniform, dimerized (D), and incommensurate (I) spin structures in the magnetic field versus temperature plane, where a significant hysteresis appears between D-I transitions in the field scan measurements. A combination of magnon ($S$=1) and soliton ($S$=1/2) excitations have successfully reproduced the observed magnetic susceptibility. In addition, such excitations provide a reasonable interpretation of the temperature dependent electron spin resonance (ESR) spectra. By comparison with the theoretical study, we conclude that D-F$_{5}$PNN is an ideal compound for investigating the spin-Peierls transition. △ Less

Submitted 21 June, 2017; originally announced June 2017.

Technical Design Report for the: PANDA Straw Tube Tracker

Authors: PANDA Collaboration, W. Erni, I. Keshelashvili, B. Krusche, M. Steinacher, Y. Heng, Z. Liu, H. Liu, X. Shen, Q. Wang, H. Xu, A. Aab, M. Albrecht, J. Becker, A. Csapó, F. Feldbauer, M. Fink, P. Friedel, F. H. Heinsius, T. Held, L. Klask, H. Koch, B. Kopf, S. Leiber, M. Leyhe , et al. (451 additional authors not shown)

Abstract: This document describes the technical layout and the expected performance of the Straw Tube Tracker (STT), the main tracking detector of the PANDA target spectrometer. The STT encloses a Micro-Vertex-Detector (MVD) for the inner tracking and is followed in beam direction by a set of GEM-stations. The tasks of the STT are the measurement of the particle momentum from the reconstructed trajectory an… ▽ More This document describes the technical layout and the expected performance of the Straw Tube Tracker (STT), the main tracking detector of the PANDA target spectrometer. The STT encloses a Micro-Vertex-Detector (MVD) for the inner tracking and is followed in beam direction by a set of GEM-stations. The tasks of the STT are the measurement of the particle momentum from the reconstructed trajectory and the measurement of the specific energy-loss for a particle identification. Dedicated simulations with full analysis studies of certain proton-antiproton reactions, identified as being benchmark tests for the whole PANDA scientific program, have been performed to test the STT layout and performance. The results are presented, and the time lines to construct the STT are described. △ Less

Submitted 4 June, 2012; v1 submitted 24 May, 2012; originally announced May 2012.

Comments: accepted for publication on EPJA

Journal ref: Eur. Phys. J. A (2013) 49: 25

Feasibility studies of the time-like proton electromagnetic form factor measurements with PANDA at FAIR

Authors: M. Sudol, M. C. Mora Espi, E. Becheva, J. Boucher, T. Hennino, R. Kunne, D. Marchand, S. Ong, B. Ramstein, J. Van de Wiele, T. Zerguerras, F. Maas, B. Kopf, M. Pelizaeus, M. Steinke, J. Zhong, E. Tomasi-Gustafsson

Abstract: The possibility of measuring the proton electromagnetic form factors in the time-like region at FAIR with the \PANDA detector is discussed. Detailed simulations on signal efficiency for the annihilation of $\bar p +p $ into a lepton pair as well as for the most important background channels have been performed. It is shown that precision measurements of the differential cross section of the reacti… ▽ More The possibility of measuring the proton electromagnetic form factors in the time-like region at FAIR with the \PANDA detector is discussed. Detailed simulations on signal efficiency for the annihilation of $\bar p +p $ into a lepton pair as well as for the most important background channels have been performed. It is shown that precision measurements of the differential cross section of the reaction $\bar p +p \to e^++ e^-$ can be obtained in a wide angular and kinematical range. The individual determination of the moduli of the electric and magnetic proton form factors will be possible up to a value of momentum transfer squared of $q^2\simeq 14$ (GeV/c)$^2$. The total $\bar p +p\to e^++e^-$ cross section will be measured up to $q^2\simeq 28$ (GeV/c)$^2$. The results obtained from simulated events are compared to the existing data. Sensitivity to the two photons exchange mechanism is also investigated. △ Less

Submitted 28 July, 2010; v1 submitted 26 July, 2009; originally announced July 2009.

Comments: 12 pages, 4 tables, 8 figures Revised, added details on simulations, 4 tables, 9 figures

Journal ref: Eur.Phys.J.A44:373-384,2010

Technical Design Report for the PANDA Solenoid and Dipole Spectrometer Magnets

Authors: The PANDA Collaboration, W. Erni, I. Keshelashvili, B. Krusche, M. Steinacher, Y. Heng, Z. Liu, H. Liu, X. Shen, O. Wang, H. Xu, J. Becker, F. Feldbauer, F. -H. Heinsius, T. Held, H. Koch, B. Kopf, M. Pelizaeus, T. Schroeder, M. Steinke, U. Wiedner, J. Zhong, A. Bianconi, M. Bragadireanu, D. Pantea , et al. (387 additional authors not shown)

Abstract: This document is the Technical Design Report covering the two large spectrometer magnets of the PANDA detector set-up. It shows the conceptual design of the magnets and their anticipated performance. It precedes the tender and procurement of the magnets and, hence, is subject to possible modifications arising during this process. This document is the Technical Design Report covering the two large spectrometer magnets of the PANDA detector set-up. It shows the conceptual design of the magnets and their anticipated performance. It precedes the tender and procurement of the magnets and, hence, is subject to possible modifications arising during this process. △ Less

Submitted 1 July, 2009; originally announced July 2009.

Comments: 10 pages, 14MB, accepted by FAIR STI in May 2009, editors: Inti Lehmann (chair), Andrea Bersani, Yuri Lobanov, Jost Luehning, Jerzy Smyrski, Technical Coordiantor: Lars Schmitt, Bernd Lewandowski (deputy), Spokespersons: Ulrich Wiedner, Paola Gianotti (deputy)

Physics Performance Report for PANDA: Strong Interaction Studies with Antiprotons

Authors: PANDA Collaboration, W. Erni, I. Keshelashvili, B. Krusche, M. Steinacher, Y. Heng, Z. Liu, H. Liu, X. Shen, O. Wang, H. Xu, J. Becker, F. Feldbauer, F. -H. Heinsius, T. Held, H. Koch, B. Kopf, M. Pelizaeus, T. Schroeder, M. Steinke, U. Wiedner, J. Zhong, A. Bianconi, M. Bragadireanu, D. Pantea , et al. (391 additional authors not shown)

Abstract: To study fundamental questions of hadron and nuclear physics in interactions of antiprotons with nucleons and nuclei, the universal PANDA detector will be built. Gluonic excitations, the physics of strange and charm quarks and nucleon structure studies will be performed with unprecedented accuracy thereby allowing high-precision tests of the strong interaction. The proposed PANDA detector is a s… ▽ More To study fundamental questions of hadron and nuclear physics in interactions of antiprotons with nucleons and nuclei, the universal PANDA detector will be built. Gluonic excitations, the physics of strange and charm quarks and nucleon structure studies will be performed with unprecedented accuracy thereby allowing high-precision tests of the strong interaction. The proposed PANDA detector is a state-of-the art internal target detector at the HESR at FAIR allowing the detection and identification of neutral and charged particles generated within the relevant angular and energy range. This report presents a summary of the physics accessible at PANDA and what performance can be expected. △ Less

Submitted 23 March, 2009; originally announced March 2009.

Comments: 216 pages

Technical Design Report for PANDA Electromagnetic Calorimeter (EMC)

Authors: PANDA Collaboration, W. Erni, I. Keshelashvili, B. Krusche, M. Steinacher, Y. Heng, Z. Liu, H. Liu, X. Shen, O. Wang, H. Xu, J. Becker, F. Feldbauer, F. -H. Heinsius, T. Held, H. Koch, B. Kopf, M. Pelizaeus, T. Schroeder, M. Steinke, U. Wiedner, J. Zhong, A. Bianconi, M. Bragadireanu, D. Pantea , et al. (387 additional authors not shown)

Abstract: This document presents the technical layout and the envisaged performance of the Electromagnetic Calorimeter (EMC) for the PANDA target spectrometer. The EMC has been designed to meet the physics goals of the PANDA experiment, which is being developed for the Facility for Antiproton and Ion Research (FAIR) at Darmstadt, Germany. The performance figures are based on extensive prototype tests and… ▽ More This document presents the technical layout and the envisaged performance of the Electromagnetic Calorimeter (EMC) for the PANDA target spectrometer. The EMC has been designed to meet the physics goals of the PANDA experiment, which is being developed for the Facility for Antiproton and Ion Research (FAIR) at Darmstadt, Germany. The performance figures are based on extensive prototype tests and radiation hardness studies. The document shows that the EMC is ready for construction up to the front-end electronics interface. △ Less

Submitted 7 October, 2008; originally announced October 2008.

Comments: 199 pages, submitted to FAIR STI on July 1st 2008, Editors: Fritz-Herbert Heinsius, Bertram Kopf, Bernd Lewandowski (Deputy Technical Coordinator), Herbert Löhner, Rainer Novotny (Project Coordinator), Klaus Peters, Philippe Rosier, Lars Schmitt (Technical Coordinator), Alexander Vasiliev; Spokespersons: Ulrich Wiedner, Paola Gianotti (deputy)

Ordering and Excitations in the Field-Induced Magnetic Phase of Cs_3Cr_2Br_9

Authors: B. Grenier, Y. Inagaki, L. P. Regnault, A. Wildes, T. Asano, Y. Ajiro, E. Lhotel, C. Paulsen, T. Ziman, J. P. Boucher

Abstract: Field-induced magnetic order has been investigated in detail in the interacting spin 3/2 dimer system Cs_3Cr_2Br_9. Elastic and inelastic neutron scattering measurements were performed up to H = 6 T, well above the critical field H_c1 = 1.5 T. The ordering displays incommensurabilities and a large hysteresis before a commensurate structure is reached. This structure is fully determined. Surprisi… ▽ More Field-induced magnetic order has been investigated in detail in the interacting spin 3/2 dimer system Cs_3Cr_2Br_9. Elastic and inelastic neutron scattering measurements were performed up to H = 6 T, well above the critical field H_c1 = 1.5 T. The ordering displays incommensurabilities and a large hysteresis before a commensurate structure is reached. This structure is fully determined. Surprisingly, the lowest excitation branch never closes. Above H_c1, the gap increases slowly with field. An analysis in terms of projected pseudo-spin is given. △ Less

Submitted 8 March, 2004; originally announced March 2004.

Comments: 4 pages, 4 figures, to appear in Physical Review Letters

Elementary Excitations in Quantum Antiferromagnetic Chains: Dyons, Spinons and Breathers

Authors: T. Asano, H. Nojiri, Y. Inagaki, Y. Ajiro, L. P. Regnault, J. P. Boucher

Abstract: Considering experimental results obtained on three prototype compounds, TMMC, CsCoCl3 (or CsCoBr3) and Cu Benzoate, we discuss the importance of non-linear excitations in the physics of quantum (and classical) antiferromagnetic spin chains. Considering experimental results obtained on three prototype compounds, TMMC, CsCoCl3 (or CsCoBr3) and Cu Benzoate, we discuss the importance of non-linear excitations in the physics of quantum (and classical) antiferromagnetic spin chains. △ Less

Submitted 17 January, 2002; originally announced January 2002.

Comments: Invited at the International Symposium on Cooperative Phenomena of Assembled Metal Complexes, November 15-17, 2001, Osaka, Japan

Dzyaloshinski-Moriya Interaction in the 2D Spin Gap System SrCu2(BO3)2

Authors: O. Cepas, K. Kakurai, L. P. Regnault, T. Ziman, J. P. Boucher, N. Aso, M. Nishi, H. Kageyama, Y. Ueda

Abstract: The Dzyaloshinski-Moriya interaction partially lifts the magnetic frustration of the spin-1/2 oxide SrCu2(BO3)2. It explains the fine structure of the excited triplet state and its unusual magnetic field dependence, as observed in previous ESR and new neutron inelastic scattering experiments. We claim that it is mainly responsible for the dispersion. We propose also a new mechanism for the obser… ▽ More The Dzyaloshinski-Moriya interaction partially lifts the magnetic frustration of the spin-1/2 oxide SrCu2(BO3)2. It explains the fine structure of the excited triplet state and its unusual magnetic field dependence, as observed in previous ESR and new neutron inelastic scattering experiments. We claim that it is mainly responsible for the dispersion. We propose also a new mechanism for the observed ESR transitions forbidden by standard selection rules, that relies on an instantaneous Dzyaloshinski-Moriya interaction induced by spin-phonon couplings. △ Less

Submitted 27 November, 2001; v1 submitted 4 June, 2001; originally announced June 2001.

Comments: 5 pages, 4 figures, symmetries clarified, added references, (v3) correct address

Journal ref: Phys. Rev. Lett. 87, 167205 (2001)

Charge Ordering and Spin Dynamics in NaV2O5

Authors: B. Grenier, O. Cepas, L. P. Regnault, J. E. Lorenzo, T. Ziman, J. P. Boucher, A. Hiess, T. Chatterji, J. Jegoudez, A. Revcolevschi

Abstract: We report high-resolution neutron inelastic scattering experiments on the spin excitations of NaV2O5. Below Tc, two branches associated with distinct energy gaps are identified. From the dispersion and intensity of the spin excitation modes, we deduce the precise zig-zag charge distribution on the ladder rungs and the corresponding charge order (about 0.6). We argue that the spin gaps observed i… ▽ More We report high-resolution neutron inelastic scattering experiments on the spin excitations of NaV2O5. Below Tc, two branches associated with distinct energy gaps are identified. From the dispersion and intensity of the spin excitation modes, we deduce the precise zig-zag charge distribution on the ladder rungs and the corresponding charge order (about 0.6). We argue that the spin gaps observed in the low-T phase of this compound are primarily due to the charge transfer. △ Less

Submitted 25 April, 2001; v1 submitted 3 July, 2000; originally announced July 2000.

Comments: 4 pages, 5 figures, to appear in Phys. Rev. Lett

Possible Localized Modes in the Uniform Quantum Heisenberg Chains of Sr2CuO3

Authors: J. P. Boucher, M. Takigawa

Abstract: A model of mobile-bond defects is tentatively proposed to analyze the "anomalies" observed on the NMR spectrum of the quantum Heisenberg chains of Sr2CuO3. A bond-defect is a local change in the exchange coupling. It results in a local alternating magnetization (LAM), which when the defect moves, creates a flip** process of the local field seen by each nuclear spin. At low temperature, when th… ▽ More A model of mobile-bond defects is tentatively proposed to analyze the "anomalies" observed on the NMR spectrum of the quantum Heisenberg chains of Sr2CuO3. A bond-defect is a local change in the exchange coupling. It results in a local alternating magnetization (LAM), which when the defect moves, creates a flip** process of the local field seen by each nuclear spin. At low temperature, when the overlap of the LAM becomes large, the defects form a periodic structure, which extends over almost all the chains. In that regime, the density of bond-defects decreases linearly with T. △ Less

Submitted 6 April, 2000; originally announced April 2000.

Comments: 4 pages + 3 figures. To appear in Physical Review B

ESR investigation on the Breather mode and the Spinon-Breather dynamical crossover in Cu Benzoate

Authors: T. Asano, H. Nojiri, Y. Inagaki, J. P. Boucher, T. Sakon, Y. Ajiro, M. Motokawa

Abstract: A new elementary-excitation, the so called "breather excitation", is observed directly by millimeter-submillimeter wave electron spin resonance (ESR) in the Heisenberg quantum spin-chain Cu benzoate, in which a field-induced gap is found recently by specific heat and neutron scattering measurements. Distinct anomalies were found in line width and in resonance field around the "dynamical crossove… ▽ More A new elementary-excitation, the so called "breather excitation", is observed directly by millimeter-submillimeter wave electron spin resonance (ESR) in the Heisenberg quantum spin-chain Cu benzoate, in which a field-induced gap is found recently by specific heat and neutron scattering measurements. Distinct anomalies were found in line width and in resonance field around the "dynamical crossover" regime between the gap-less spinon-regime and the gapped breather-regime. When the temperature becomes sufficiently lower than the energy gap, a new ESR-line with very narrow line-width is found, which is the manifestation of the breather excitation. The non-linear field dependence of the resonance field agrees well with the theoretical formula of the first breather-excitation proposed by Oshikawa and Affleck. The present work establishes experimentally for the first time that a sine-Gordon model is applicable to explain spin dynamics in a S=1/2 Heisenberg spin chain subjected to staggered field even in high fields. △ Less

Submitted 21 November, 1999; v1 submitted 7 November, 1999; originally announced November 1999.

Comments: Revtex, 4 pages, 4 figures, submitted to Phys. Rev. Lett

Journal ref: Phys. Rev. Lett., 84 (2000) 5880

Soliton Lattices in the Incommensurate Spin-Peierls Phase: Local Distortions and Magnetizations

Authors: Goetz S. Uhrig, Friedhelm Schoenfeld, Jean-Paul Boucher, Mladen Horvatic

Abstract: It is shown that nonadiabatic fluctuations of the soliton lattice in the spin-Peierls system CuGeO_3 lead to an important reduction of the NMR line widths. These fluctuations are the zero-point motion of the massless phasonic excitations. Furthermore, we show that the discrepancy of X-ray and NMR soliton widths can be understood as the difference between a distortive and a magnetic width. Their… ▽ More It is shown that nonadiabatic fluctuations of the soliton lattice in the spin-Peierls system CuGeO_3 lead to an important reduction of the NMR line widths. These fluctuations are the zero-point motion of the massless phasonic excitations. Furthermore, we show that the discrepancy of X-ray and NMR soliton widths can be understood as the difference between a distortive and a magnetic width. Their ratio is controlled by the frustration of the spin system. By this work, theoretical and experimental results can be reconciled in two important points. △ Less

Submitted 19 February, 1999; originally announced February 1999.

Comments: 9 pages, 5 figures included, Revtex submitted to Physical Review B

Journal ref: Phys. Rev. B 60, 9468 (1999)

Spin Dynamics in the Magnetic Chains Arrays of Sr14Cu24O41: a Neutron Inelastic scattering Investigation

Authors: L. P. Regnault, J. P. Boucher, H. Moudden, J. E. Lorenzo, A. Hiess, U. Ammerahl, G. Dhalenne, A. Revcolevschi

Abstract: Below about 150 K, the spin arrangement in the chain arrays of Sr14Cu24O41 is shown to develop in two dimensions (2D). Both the correlations and the dispersion of the observed elementary excitations agree well with a model of interacting dimers. Along the chains, the intra- and inter-dimer distances are equal to 2 and about 3 times the distance (c) between neighboring Cu ions. While the intra-di… ▽ More Below about 150 K, the spin arrangement in the chain arrays of Sr14Cu24O41 is shown to develop in two dimensions (2D). Both the correlations and the dispersion of the observed elementary excitations agree well with a model of interacting dimers. Along the chains, the intra- and inter-dimer distances are equal to 2 and about 3 times the distance (c) between neighboring Cu ions. While the intra-dimer coupling is J about 10 meV, the inter-dimer couplings along and between the chains are of comparable strenght, J// about -1.1 meV and Jperp about 1.7 meV, respectively. This remarkable 2D arrangement satisfies the formal Cu valence of the undoped compound. Our data suggest also that it is associated with a relative sliding of one chain with respect to the next one, which, as T decreases, develops in the chain direction. A qualitative analysis shows that nearest inter-dimer spin correlations are ferromagnetic, which, in such a 2D structure, could well result from frustration effects. △ Less

Submitted 1 September, 1998; originally announced September 1998.

Comments: 4 pages, 5 figures, submitted to Phys.Rev.B, date of receipt 29 June 1998

Thermodynamic Properties of the Spin-1/2 Antiferromagnetic ladder Cu2(C2H12N2)2Cl4 under Magnetic Field

Authors: R. Calemczuk, J. Riera, D. Poilblanc, J. -P. Boucher, G. Chaboussant, L. Levy, O. Piovesana

Abstract: Specific heat ($C_V$) measurements in the spin-1/2 Cu$_2$(C$_2$H$_{12}$N$_2$)$_2$Cl$_4$ system under a magnetic field up to $H=8.25 T$ are reported and compared to the results of numerical calculations based on the 2-leg antiferromagnetic Heisenberg ladder. While the temperature dependences of both the susceptibility and the low field specific heat are accurately reproduced by this model, deviat… ▽ More Specific heat ($C_V$) measurements in the spin-1/2 Cu$_2$(C$_2$H$_{12}$N$_2$)$_2$Cl$_4$ system under a magnetic field up to $H=8.25 T$ are reported and compared to the results of numerical calculations based on the 2-leg antiferromagnetic Heisenberg ladder. While the temperature dependences of both the susceptibility and the low field specific heat are accurately reproduced by this model, deviations are observed below the critical field $H_{C1}$ at which the spin gap closes. In this Quantum High Field phase, the contribution of the low-energy quantum fluctuations are stronger than in the Heisenberg ladder model. We argue that this enhancement can be attributed to dynamical lattice fluctuations. Finally, we show that such a Heisenberg ladder, for $H>H_{C1}$, is unstable, when coupled to the 3D lattice, against a lattice distortion. These results provide an alternative explanation for the observed low temperature ($T_C\sim 0.5K$ -- $0.8K$) phase (previously interpreted as a 3D magnetic ordering) as a new type of incommensurate gapped state. △ Less

Submitted 22 May, 1998; v1 submitted 19 May, 1998; originally announced May 1998.

Comments: Minor changes, list of authors completed

A magnetic model for the incommensurate I phase of spin-Peierls systems

Authors: G. S. Uhrig, F. Schoenfeld, J. P. Boucher

Abstract: A magnetic model is proposed for describing the incommensurate I phase of spin-Peierls systems. Based on the harmonicity of the lattice distortion, its main ingredient is that the distortion of the lattice adjusts to the average magnetization such that the system is always gapful. The presence of dynamical incommensurabilities in the fluctuation spectra is also predicted. Recent experimental res… ▽ More A magnetic model is proposed for describing the incommensurate I phase of spin-Peierls systems. Based on the harmonicity of the lattice distortion, its main ingredient is that the distortion of the lattice adjusts to the average magnetization such that the system is always gapful. The presence of dynamical incommensurabilities in the fluctuation spectra is also predicted. Recent experimental results for CuGeO_3 obtained by NMR, ESR and light scattering absorption are well understood within this model. △ Less

Submitted 22 April, 1998; originally announced April 1998.

Comments: 8 pages, 3 figures, Latex with EPL style files all included

Report number: MHTHP-22041998

Journal ref: Europhys. Lett., 41, pp. 431-436 (1998)