-
Variability in X-ray induced effects in [Rh(COD)Cl]2 with changing experimental parameters
Authors:
Nathalie K. Fernando,
Hanna L. B. Boström,
Claire A. Murray,
Robin L. Owen,
Amber L. Thompson,
Joshua L. Dickerson,
Elspeth F. Garman,
Andrew B. Cairns,
Anna Regoutz
Abstract:
X-ray characterisation methods have undoubtedly enabled cutting-edge advances in all aspects of materials research. Despite the enormous breadth of information that can be extracted from these techniques, the challenge of radiation-induced sample change and damage remains prevalent. This is largely due to the emergence of modern, high-intensity X-ray source technologies and growing potential to ca…
▽ More
X-ray characterisation methods have undoubtedly enabled cutting-edge advances in all aspects of materials research. Despite the enormous breadth of information that can be extracted from these techniques, the challenge of radiation-induced sample change and damage remains prevalent. This is largely due to the emergence of modern, high-intensity X-ray source technologies and growing potential to carry out more complex, longer duration in-situ or in-operando studies. The tunability of synchrotron beamlines enables the routine application of photon energy-dependent experiments. This work explores the structural stability of [Rh(COD)Cl]2, a widely used catalyst and precursor in the chemical industry, across a range of beamline parameters that target X-ray energies of 8 keV, 15 keV, 18 keV and 25 keV, on a powder X-ray diffraction synchrotron beamline at room temperature. Structural changes are discussed with respect to absorbed X-ray dose at each experimental setting associated with the respective photon energy. In addition, the X-ray radiation hardness of the catalyst is discussed, by utilising the diffraction data at the different energies to determine a dose limit, which is often considered in protein crystallography and typically overlooked in small molecule crystallography. This work not only gives fundamental insight into how damage manifests in this organometallic catalyst, but will encourage careful consideration of experimental X-ray parameters before conducting diffraction on similar radiation-sensitive organometallic materials.
△ Less
Submitted 24 August, 2022; v1 submitted 23 August, 2022;
originally announced August 2022.
-
Octahedral tilting in Prussian blue analogues
Authors:
Hanna L. B. Boström,
William R. Brant
Abstract:
Octahedral tilting is key to the structure and functionality of perovskites. Here we show how these distortions manifest in the related Prussian blue analogues (PBAs): cyanide versions of double perovskites with formula A$_x$M[M$^{\prime}$(CN)$_6$]$_{1-y}\Box _y\cdot n$H$_2$O (A = alkali metal, M and M$^{\prime}$ = transition metals, $\Box$ = vacancy/defect). Tilts are favoured by high values of…
▽ More
Octahedral tilting is key to the structure and functionality of perovskites. Here we show how these distortions manifest in the related Prussian blue analogues (PBAs): cyanide versions of double perovskites with formula A$_x$M[M$^{\prime}$(CN)$_6$]$_{1-y}\Box _y\cdot n$H$_2$O (A = alkali metal, M and M$^{\prime}$ = transition metals, $\Box$ = vacancy/defect). Tilts are favoured by high values of $x$ if A = Na or K, whereas the transition metals play a less important role. External hydrostatic pressure can induce tilt transitions nearly irrespective of the stoichiometry, whereas thermal transitions are only reported for $x>1$. Interstitial water can alter the transitions induced by a different stimulus, but (de)hydration \textit{per se} does not lead to tilts. Implications for rational design of critical functionality -- including improper ferroelectricity and electrochemical performance -- are discussed. The results are important for a fundamental understanding of phase transitions as well as for the development of functional materials based on PBAs.
△ Less
Submitted 7 January, 2022;
originally announced January 2022.
-
Hybrid Perovskites, Metal--Organic Frameworks, and Beyond: Unconventional Degrees of Freedom in Molecular Frameworks
Authors:
Hanna L. B. Boström,
Andrew L. Goodwin
Abstract:
The structural degrees of freedom of a material are the various distortions most straightforwardly activated by external stimuli. A highly successful design strategy in materials chemistry involves controlling these individual distortions to produce useful functional responses. In a ferroelectric such as lead titanate, for example, the key degree of freedom involves displacements of Pb$^{2+}$; by…
▽ More
The structural degrees of freedom of a material are the various distortions most straightforwardly activated by external stimuli. A highly successful design strategy in materials chemistry involves controlling these individual distortions to produce useful functional responses. In a ferroelectric such as lead titanate, for example, the key degree of freedom involves displacements of Pb$^{2+}$; by coupling these together, the system interacts with electric fields. An exciting development has been to exploit the interplay between different distortions: $e.g.$ generating polarisation by combining different polyhedral rotations. Thus, degrees of freedom act as geometric `elements' that can be combined to engineer materials with interesting properties. Just as the discovery of new elements diversified chemical space, identifying new types of structural degrees of freedom is a key strategy for develo** new functional materials. In this context, molecular frameworks are a fertile source of unanticipated distortion types, many of which have no parallel in conventional solid-state chemistry. Framework materials are solids whose structures are assembled from nodes and linkers to form scaffolding-like networks. These structures usually contain cavities, which may host additional ions for charge balance. In the well-established systems---such as lead titanate---these components are all atomic, but in molecular frameworks, at least one ion is molecular. Here, we survey the unconventional degrees of freedom introduced through the replacement of atoms by molecules. Our motivation is to understand the role these new distortions play in different materials properties. The various degrees of freedom are summarised and described in the context of experimental examples. We highlight a number of directions for future research, which demonstrate the extraordinary possibilities for this nascent field.
△ Less
Submitted 27 November, 2020;
originally announced November 2020.
-
Hidden Diversity of Vacancy Networks in Prussian Blue Analogues
Authors:
Arkadiy Simonov,
Trees De Baerdemaeker,
Hanna L. B. Boström,
María Laura Ríos Gómez,
Harry J. Gray,
Dmitry Chernyshov,
Alexey Bosak,
Hans-Beat Bürgi,
Andrew L. Goodwin
Abstract:
Prussian blue analogues (PBAs) are a broad and important family of microporous inorganic solids, famous for their gas storage, metal-ion immobilisation, proton conduction, and stimuli-dependent magnetic, electronic and optical properties. The family also includes the widely-used double-metal cyanide (DMC) catalysts and the topical hexacyanoferrate/hexacyanomanganate (HCF/HCM) battery materials. Ce…
▽ More
Prussian blue analogues (PBAs) are a broad and important family of microporous inorganic solids, famous for their gas storage, metal-ion immobilisation, proton conduction, and stimuli-dependent magnetic, electronic and optical properties. The family also includes the widely-used double-metal cyanide (DMC) catalysts and the topical hexacyanoferrate/hexacyanomanganate (HCF/HCM) battery materials. Central to the various physical properties of PBAs is the ability to transport mass reversibly, a process made possible by structural vacancies. Normally presumed random, vacancy arrangements are actually crucially important because they control the connectivity of the micropore network, and hence diffusivity and adsorption profiles. The long-standing obstacle to characterising PBA vacancy networks has always been the relative inaccessibility of single-crystal samples. Here we report the growth of single crystals of a range of PBAs. By measuring and interpreting their X-ray diffuse scattering patterns, we identify for the first time a striking diversity of non-random vacancy arrangements that is hidden from conventional crystallographic analysis of powder samples. Moreover, we show that this unexpected phase complexity can be understood in terms of a remarkably simple microscopic model based on local rules of electroneutrality and centrosymmetry. The hidden phase boundaries that emerge demarcate vacancy-network polymorphs with profoundly different micropore characteristics. Our results establish a clear foundation for correlated defect engineering in PBAs as a means of controlling storage capacity, anisotropy, and transport efficiency.
△ Less
Submitted 28 August, 2019;
originally announced August 2019.
-
Recipes for improper ferroelectricity in hybrid perovskites
Authors:
Hanna L B Boström,
Mark S Senn,
Andrew L Goodwin
Abstract:
The central goal of crystal engineering is to develop precise control over material function \emph{via} rational design of structure. A particularly successful realisation of this paradigm is the example of hybrid improper ferroelectricity in layered perovskite materials, where cation vacancies and cooperative octahedral tilts combine to break inversion symmetry. However, in the more chemically di…
▽ More
The central goal of crystal engineering is to develop precise control over material function \emph{via} rational design of structure. A particularly successful realisation of this paradigm is the example of hybrid improper ferroelectricity in layered perovskite materials, where cation vacancies and cooperative octahedral tilts combine to break inversion symmetry. However, in the more chemically diverse and technologically relevant family of inorganic ABX$_3$ perovskites, symmetry conspires to render hybrid coupling to polar distortions impossible. In this study, we use group-theoretical analysis to uncover a profound enhancement of the number of improper ferroelectric coupling schemes available to \emph{molecular} perovskites. This enhancement arises because molecular substitution on the A- and/or X-site significantly diversifies the range of distortions possible. Not only do our insights rationalise the emergence of polarisation in a number of previously-studied materials, but we identify the fundamental importance of molecular degrees of freedom at the A-site, which are much more straightforwardly controlled from a synthetic viewpoint than are lattice, charge and orbital degrees of freedom. We envisage that the crystal design principles we develop here will be enable targeted synthesis of a large family of new acentric functional materials.
△ Less
Submitted 4 December, 2017;
originally announced December 2017.
-
Compositional nanodomain formation in hybrid formate perovskites
Authors:
Edwina A. Donlan,
Hanna L. B. Boström,
Harry S. Geddes,
Emily M. Reynolds,
Andrew L. Goodwin
Abstract:
We report the synthesis and structural characterisation of three mixed-metal formate perovskite families [C(NH$_2$)$_3$]M$_{1-x}$Cu$_x$(HCOO)$_3$ (M = Mn, Zn, Mg). Using a combination of infrared spectroscopy, non-negative matrix factorization, and reverse Monte Carlo refinement, we show that the Mn- and Zn-containing compounds support compositional nanodomains resembling the polar nanoregions of…
▽ More
We report the synthesis and structural characterisation of three mixed-metal formate perovskite families [C(NH$_2$)$_3$]M$_{1-x}$Cu$_x$(HCOO)$_3$ (M = Mn, Zn, Mg). Using a combination of infrared spectroscopy, non-negative matrix factorization, and reverse Monte Carlo refinement, we show that the Mn- and Zn-containing compounds support compositional nanodomains resembling the polar nanoregions of conventional relaxor ferroelectrics. The M = Mg family exhibits a miscibility gap that we suggest reflects the limiting behaviour of nanodomain formation.
△ Less
Submitted 4 September, 2017;
originally announced September 2017.
-
Negative thermal expansion and metallophilicity in Cu$_3$[Co(CN)$_6$]
Authors:
Adam F. Sapnik,
Xiaofei Liu,
Hanna L. B. Boström,
Chloe S. Coates,
Alistair R. Overy,
Emily M. Reynolds,
Alexandre Tkatchenko,
Andrew L. Goodwin
Abstract:
We report the synthesis and structural characterisation of the molecular framework copper(I) hexacyanocobaltate(III), Cu$_3$[Co(CN)$_6$], which we find to be isostructural to H$_3$[Co(CN)$_6$] and the colossal negative thermal expansion material Ag$_3$[Co(CN)$_6$]. Using synchrotron X-ray powder diffraction measurements, we find strong positive and negative thermal expansion behaviour respectively…
▽ More
We report the synthesis and structural characterisation of the molecular framework copper(I) hexacyanocobaltate(III), Cu$_3$[Co(CN)$_6$], which we find to be isostructural to H$_3$[Co(CN)$_6$] and the colossal negative thermal expansion material Ag$_3$[Co(CN)$_6$]. Using synchrotron X-ray powder diffraction measurements, we find strong positive and negative thermal expansion behaviour respectively perpendicular and parallel to the trigonal crystal axis: $α_a$ = 25.4(5)\,MK$^{-1}$ and $α_c$ = $-$43.5(8)\,MK$^{-1}$. These opposing effects collectively result in a volume expansivity $α_V$ = 7.4(11)\,MK$^{-1}$ that is remarkably small for an anisotropic molecular framework. This thermal response is discussed in the context of the behaviour of the analogous H- and Ag-containing systems. We make use of density-functional theory with many-body dispersion interactions (DFT+MBD) to demonstrate that Cu$\ldots$Cu metallophilic (`cuprophilic') interactions are significantly weaker in Cu$_3$[Co(CN)$_6$] than Ag$\ldots$Ag interactions in Ag$_3$[Co(CN)$_6$], but that this lowering of energy scale counterintuitively translates to a more moderate---rather than enhanced---degree of structural flexibility. The same conclusion is drawn from consideration of a simple lattice dynamical model, which we also present here. Our results demonstrate that strong interactions can actually be exploited in the design of ultra-responsive materials if those interactions are set up to act in tension.
△ Less
Submitted 23 February, 2017;
originally announced February 2017.
-
Columnar Shifts as Symmetry-Breaking Degrees of Freedom in Molecular Perovskites
Authors:
Hanna L. B. Boström,
Joshua A. Hill,
Andrew L. Goodwin
Abstract:
We introduce columnar shifts---collective rigid-body translations---as a structural degree of freedom relevant to the phase behaviour of molecular perovskites ABX$_{\textrm3}$ (X = molecular anion). Like the well-known octahedral tilts of conventional perovskites, shifts also preserve the octahedral coordination geometry of the B-site cation in molecular perovskites, and so are predisposed to infl…
▽ More
We introduce columnar shifts---collective rigid-body translations---as a structural degree of freedom relevant to the phase behaviour of molecular perovskites ABX$_{\textrm3}$ (X = molecular anion). Like the well-known octahedral tilts of conventional perovskites, shifts also preserve the octahedral coordination geometry of the B-site cation in molecular perovskites, and so are predisposed to influencing the low-energy dynamics and displacive phase transitions of these topical systems. We present a qualitative overview of the interplay between shift activation and crystal symmetry breaking, and introduce a generalised terminology to allow characterisation of simple shift distortions, drawing analogy to the "Glazer notation" for octahedral tilts. We apply our approach to the interpretation of a representative selection of azide and formate perovskite structures, and discuss the implications for functional exploitation of shift degrees of freedom in negative thermal expansion materials and hybrid ferroelectrics.
△ Less
Submitted 18 August, 2016;
originally announced August 2016.
