-
Simultaneous Many-Row Activation in Off-the-Shelf DRAM Chips: Experimental Characterization and Analysis
Authors:
Ismail Emir Yuksel,
Yahya Can Tugrul,
F. Nisa Bostanci,
Geraldo F. Oliveira,
A. Giray Yaglikci,
Ataberk Olgun,
Melina Soysal,
Haocong Luo,
Juan Gómez-Luna,
Mohammad Sadrosadati,
Onur Mutlu
Abstract:
We experimentally analyze the computational capability of commercial off-the-shelf (COTS) DRAM chips and the robustness of these capabilities under various timing delays between DRAM commands, data patterns, temperature, and voltage levels. We extensively characterize 120 COTS DDR4 chips from two major manufacturers. We highlight four key results of our study. First, COTS DRAM chips are capable of…
▽ More
We experimentally analyze the computational capability of commercial off-the-shelf (COTS) DRAM chips and the robustness of these capabilities under various timing delays between DRAM commands, data patterns, temperature, and voltage levels. We extensively characterize 120 COTS DDR4 chips from two major manufacturers. We highlight four key results of our study. First, COTS DRAM chips are capable of 1) simultaneously activating up to 32 rows (i.e., simultaneous many-row activation), 2) executing a majority of X (MAJX) operation where X>3 (i.e., MAJ5, MAJ7, and MAJ9 operations), and 3) copying a DRAM row (concurrently) to up to 31 other DRAM rows, which we call Multi-RowCopy. Second, storing multiple copies of MAJX's input operands on all simultaneously activated rows drastically increases the success rate (i.e., the percentage of DRAM cells that correctly perform the computation) of the MAJX operation. For example, MAJ3 with 32-row activation (i.e., replicating each MAJ3's input operands 10 times) has a 30.81% higher average success rate than MAJ3 with 4-row activation (i.e., no replication). Third, data pattern affects the success rate of MAJX and Multi-RowCopy operations by 11.52% and 0.07% on average. Fourth, simultaneous many-row activation, MAJX, and Multi-RowCopy operations are highly resilient to temperature and voltage changes, with small success rate variations of at most 2.13% among all tested operations. We believe these empirical results demonstrate the promising potential of using DRAM as a computation substrate. To aid future research and development, we open-source our infrastructure at https://github.com/CMU-SAFARI/SiMRA-DRAM.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
Amplifying Main Memory-Based Timing Covert and Side Channels using Processing-in-Memory Operations
Authors:
Konstantinos Kanellopoulos,
F. Nisa Bostanci,
Ataberk Olgun,
A. Giray Yaglikci,
Ismail Emir Yuksel,
Nika Mansouri Ghiasi,
Zulal Bingol,
Mohammad Sadrosadati,
Onur Mutlu
Abstract:
The adoption of processing-in-memory (PiM) architectures has been gaining momentum because they provide high performance and low energy consumption by alleviating the data movement bottleneck. Yet, the security of such architectures has not been thoroughly explored. The adoption of PiM solutions provides a new way to directly access main memory, which can be potentially exploited by malicious user…
▽ More
The adoption of processing-in-memory (PiM) architectures has been gaining momentum because they provide high performance and low energy consumption by alleviating the data movement bottleneck. Yet, the security of such architectures has not been thoroughly explored. The adoption of PiM solutions provides a new way to directly access main memory, which can be potentially exploited by malicious user applications. We show that this new way to access main memory opens opportunities for high-throughput timing attack vectors that are hard-to-mitigate without significant performance overhead.
We introduce IMPACT, a set of high-throughput main memory-based timing attacks that leverage characteristics of PiM architectures to establish covert and side channels. IMPACT enables high-throughput communication and private information leakage. To achieve this, IMPACT (i) eliminates expensive cache bypassing steps required by processor-centric main memory and cache-based timing attacks and (ii) leverages the intrinsic parallelism of PiM operations. First, we showcase two covert-channel attack variants that run on the host CPU and leverage PiM architectures to gain direct and fast access to main memory and establish high-throughput communication covert channels. Second, we showcase a side-channel attack on a DNA sequence analysis application that leaks the private characteristics of a user's sample genome by leveraging PiM operations. Our results demonstrate that (i) our covert channels achieve up to 14.16 Mb/s communication throughput, which is 6.38x faster than the state-of-the-art main memory-based covert channels, and (ii) our side-channel attack allows the attacker to determine the properties of a sample genome at a throughput of 7.5 Mb/s with 96% accuracy. We discuss and evaluate several countermeasures for IMPACT to enable secure and robust PiM architectures.
△ Less
Submitted 22 April, 2024; v1 submitted 17 April, 2024;
originally announced April 2024.
-
MIMDRAM: An End-to-End Processing-Using-DRAM System for High-Throughput, Energy-Efficient and Programmer-Transparent Multiple-Instruction Multiple-Data Processing
Authors:
Geraldo F. Oliveira,
Ataberk Olgun,
Abdullah Giray Yağlıkçı,
F. Nisa Bostancı,
Juan Gómez-Luna,
Saugata Ghose,
Onur Mutlu
Abstract:
Processing-using-DRAM (PUD) is a processing-in-memory (PIM) approach that uses a DRAM array's massive internal parallelism to execute very-wide data-parallel operations, in a single-instruction multiple-data (SIMD) fashion. However, DRAM rows' large and rigid granularity limit the effectiveness and applicability of PUD in three ways. First, since applications have varying degrees of SIMD paralleli…
▽ More
Processing-using-DRAM (PUD) is a processing-in-memory (PIM) approach that uses a DRAM array's massive internal parallelism to execute very-wide data-parallel operations, in a single-instruction multiple-data (SIMD) fashion. However, DRAM rows' large and rigid granularity limit the effectiveness and applicability of PUD in three ways. First, since applications have varying degrees of SIMD parallelism, PUD execution often leads to underutilization, throughput loss, and energy waste. Second, most PUD architectures are limited to the execution of parallel map operations. Third, the need to feed the wide DRAM row with tens of thousands of data elements combined with the lack of adequate compiler support for PUD systems create a programmability barrier.
Our goal is to design a flexible PUD system that overcomes the limitations caused by the large and rigid granularity of PUD. To this end, we propose MIMDRAM, a hardware/software co-designed PUD system that introduces new mechanisms to allocate and control only the necessary resources for a given PUD operation. The key idea of MIMDRAM is to leverage fine-grained DRAM (i.e., the ability to independently access smaller segments of a large DRAM row) for PUD computation. MIMDRAM exploits this key idea to enable a multiple-instruction multiple-data (MIMD) execution model in each DRAM subarray.
We evaluate MIMDRAM using twelve real-world applications and 495 multi-programmed application mixes. Our evaluation shows that MIMDRAM provides 34x the performance, 14.3x the energy efficiency, 1.7x the throughput, and 1.3x the fairness of a state-of-the-art PUD framework, along with 30.6x and 6.8x the energy efficiency of a high-end CPU and GPU, respectively. MIMDRAM adds small area cost to a DRAM chip (1.11%) and CPU die (0.6%).
△ Less
Submitted 3 March, 2024; v1 submitted 29 February, 2024;
originally announced February 2024.
-
CoMeT: Count-Min-Sketch-based Row Tracking to Mitigate RowHammer at Low Cost
Authors:
F. Nisa Bostanci,
Ismail Emir Yuksel,
Ataberk Olgun,
Konstantinos Kanellopoulos,
Yahya Can Tugrul,
A. Giray Yaglikci,
Mohammad Sadrosadati,
Onur Mutlu
Abstract:
We propose a new RowHammer mitigation mechanism, CoMeT, that prevents RowHammer bitflips with low area, performance, and energy costs in DRAM-based systems at very low RowHammer thresholds. The key idea of CoMeT is to use low-cost and scalable hash-based counters to track DRAM row activations. CoMeT uses the Count-Min Sketch technique that maps each DRAM row to a group of counters, as uniquely as…
▽ More
We propose a new RowHammer mitigation mechanism, CoMeT, that prevents RowHammer bitflips with low area, performance, and energy costs in DRAM-based systems at very low RowHammer thresholds. The key idea of CoMeT is to use low-cost and scalable hash-based counters to track DRAM row activations. CoMeT uses the Count-Min Sketch technique that maps each DRAM row to a group of counters, as uniquely as possible, using multiple hash functions. When a DRAM row is activated, CoMeT increments the counters mapped to that DRAM row. Because the map** from DRAM rows to counters is not completely unique, activating one row can increment one or more counters mapped to another row. Thus, CoMeT may overestimate, but never underestimates, a DRAM row's activation count. This property of CoMeT allows it to securely prevent RowHammer bitflips while properly configuring its hash functions reduces overestimations. As a result, CoMeT 1) implements substantially fewer counters than the number of DRAM rows in a DRAM bank and 2) does not significantly overestimate a DRAM row's activation count.
Our comprehensive evaluations show that CoMeT prevents RowHammer bitflips with an average performance overhead of only 4.01% across 61 benign single-core workloads for a very low RowHammer threshold of 125, normalized to a system with no RowHammer mitigation. CoMeT achieves a good trade-off between performance, energy, and area overheads. Compared to the best-performing state-of-the-art mitigation, CoMeT requires 74.2x less area overhead at the RowHammer threshold 125 and incurs a small performance overhead on average for all RowHammer thresholds. Compared to the best-performing low-area-cost mechanism, at a very low RowHammer threshold of 125, CoMeT improves performance by up to 39.1% while incurring a similar area overhead. CoMeT is openly and freely available at https://github.com/CMU-SAFARI/CoMeT.
△ Less
Submitted 28 February, 2024;
originally announced February 2024.
-
Functionally-Complete Boolean Logic in Real DRAM Chips: Experimental Characterization and Analysis
Authors:
Ismail Emir Yuksel,
Yahya Can Tugrul,
Ataberk Olgun,
F. Nisa Bostanci,
A. Giray Yaglikci,
Geraldo F. Oliveira,
Haocong Luo,
Juan Gómez-Luna,
Mohammad Sadrosadati,
Onur Mutlu
Abstract:
Processing-using-DRAM (PuD) is an emerging paradigm that leverages the analog operational properties of DRAM circuitry to enable massively parallel in-DRAM computation. PuD has the potential to reduce or eliminate costly data movement between processing elements and main memory. Prior works experimentally demonstrate three-input MAJ (MAJ3) and two-input AND and OR operations in commercial off-the-…
▽ More
Processing-using-DRAM (PuD) is an emerging paradigm that leverages the analog operational properties of DRAM circuitry to enable massively parallel in-DRAM computation. PuD has the potential to reduce or eliminate costly data movement between processing elements and main memory. Prior works experimentally demonstrate three-input MAJ (MAJ3) and two-input AND and OR operations in commercial off-the-shelf (COTS) DRAM chips. Yet, demonstrations on COTS DRAM chips do not provide a functionally complete set of operations.
We experimentally demonstrate that COTS DRAM chips are capable of performing 1) functionally-complete Boolean operations: NOT, NAND, and NOR and 2) many-input (i.e., more than two-input) AND and OR operations. We present an extensive characterization of new bulk bitwise operations in 256 off-the-shelf modern DDR4 DRAM chips. We evaluate the reliability of these operations using a metric called success rate: the fraction of correctly performed bitwise operations. Among our 19 new observations, we highlight four major results. First, we can perform the NOT operation on COTS DRAM chips with a 98.37% success rate on average. Second, we can perform up to 16-input NAND, NOR, AND, and OR operations on COTS DRAM chips with high reliability (e.g., 16-input NAND, NOR, AND, and OR with an average success rate of 94.94%, 95.87%, 94.94%, and 95.85%, respectively). Third, data pattern only slightly affects bitwise operations. Our results show that executing NAND, NOR, AND, and OR operations with random data patterns decreases the success rate compared to all logic-1/logic-0 patterns by 1.39%, 1.97%, 1.43%, and 1.98%, respectively. Fourth, bitwise operations are highly resilient to temperature changes, with small success rate fluctuations of at most 1.66% when the temperature is increased from 50C to 95C. We open-source our infrastructure at https://github.com/CMU-SAFARI/FCDRAM
△ Less
Submitted 21 April, 2024; v1 submitted 28 February, 2024;
originally announced February 2024.
-
PULSAR: Simultaneous Many-Row Activation for Reliable and High-Performance Computing in Off-the-Shelf DRAM Chips
Authors:
Ismail Emir Yuksel,
Yahya Can Tugrul,
F. Nisa Bostanci,
Abdullah Giray Yaglikci,
Ataberk Olgun,
Geraldo F. Oliveira,
Melina Soysal,
Haocong Luo,
Juan Gomez Luna,
Mohammad Sadrosadati,
Onur Mutlu
Abstract:
Data movement between the processor and the main memory is a first-order obstacle against improving performance and energy efficiency in modern systems. To address this obstacle, Processing-using-Memory (PuM) is a promising approach where bulk-bitwise operations are performed leveraging intrinsic analog properties within the DRAM array and massive parallelism across DRAM columns. Unfortunately, 1)…
▽ More
Data movement between the processor and the main memory is a first-order obstacle against improving performance and energy efficiency in modern systems. To address this obstacle, Processing-using-Memory (PuM) is a promising approach where bulk-bitwise operations are performed leveraging intrinsic analog properties within the DRAM array and massive parallelism across DRAM columns. Unfortunately, 1) modern off-the-shelf DRAM chips do not officially support PuM operations, and 2) existing techniques of performing PuM operations on off-the-shelf DRAM chips suffer from two key limitations. First, these techniques have low success rates, i.e., only a small fraction of DRAM columns can correctly execute PuM operations because they operate beyond manufacturer-recommended timing constraints, causing these operations to be highly susceptible to noise and process variation. Second, these techniques have limited compute primitives, preventing them from fully leveraging parallelism across DRAM columns and thus hindering their performance benefits.
We propose PULSAR, a new technique to enable high-success-rate and high-performance PuM operations in off-the-shelf DRAM chips. PULSAR leverages our new observation that a carefully crafted sequence of DRAM commands simultaneously activates up to 32 DRAM rows. PULSAR overcomes the limitations of existing techniques by 1) replicating the input data to improve the success rate and 2) enabling new bulk bitwise operations (e.g., many-input majority, Multi-RowInit, and Bulk-Write) to improve the performance.
Our analysis on 120 off-the-shelf DDR4 chips from two major manufacturers shows that PULSAR achieves a 24.18% higher success rate and 121% higher performance over seven arithmetic-logic operations compared to FracDRAM, a state-of-the-art off-the-shelf DRAM-based PuM technique.
△ Less
Submitted 18 March, 2024; v1 submitted 5 December, 2023;
originally announced December 2023.
-
Victima: Drastically Increasing Address Translation Reach by Leveraging Underutilized Cache Resources
Authors:
Konstantinos Kanellopoulos,
Hong Chul Nam,
F. Nisa Bostanci,
Rahul Bera,
Mohammad Sadrosadati,
Rakesh Kumar,
Davide-Basilio Bartolini,
Onur Mutlu
Abstract:
Address translation is a performance bottleneck in data-intensive workloads due to large datasets and irregular access patterns that lead to frequent high-latency page table walks (PTWs). PTWs can be reduced by using (i) large hardware TLBs or (ii) large software-managed TLBs. Unfortunately, both solutions have significant drawbacks: increased access latency, power and area (for hardware TLBs), an…
▽ More
Address translation is a performance bottleneck in data-intensive workloads due to large datasets and irregular access patterns that lead to frequent high-latency page table walks (PTWs). PTWs can be reduced by using (i) large hardware TLBs or (ii) large software-managed TLBs. Unfortunately, both solutions have significant drawbacks: increased access latency, power and area (for hardware TLBs), and costly memory accesses, the need for large contiguous memory blocks, and complex OS modifications (for software-managed TLBs). We present Victima, a new software-transparent mechanism that drastically increases the translation reach of the processor by leveraging the underutilized resources of the cache hierarchy. The key idea of Victima is to repurpose L2 cache blocks to store clusters of TLB entries, thereby providing an additional low-latency and high-capacity component that backs up the last-level TLB and thus reduces PTWs. Victima has two main components. First, a PTW cost predictor (PTW-CP) identifies costly-to-translate addresses based on the frequency and cost of the PTWs they lead to. Second, a TLB-aware cache replacement policy prioritizes kee** TLB entries in the cache hierarchy by considering (i) the translation pressure (e.g., last-level TLB miss rate) and (ii) the reuse characteristics of the TLB entries. Our evaluation results show that in native (virtualized) execution environments Victima improves average end-to-end application performance by 7.4% (28.7%) over the baseline four-level radix-tree-based page table design and by 6.2% (20.1%) over a state-of-the-art software-managed TLB, across 11 diverse data-intensive workloads. Victima (i) is effective in both native and virtualized environments, (ii) is completely transparent to application and system software, and (iii) incurs very small area and power overheads on a modern high-end CPU.
△ Less
Submitted 5 January, 2024; v1 submitted 6 October, 2023;
originally announced October 2023.
-
NICER observations of thermonuclear bursts from 4U 1728-34: Detection of oscillations prior to the onset of two bursts
Authors:
Funda Bostanci,
Tugba Boztepe,
Tolga Guver,
Tod E. Strohmayer,
Yuri Cavecchi,
Ersin Gogus,
Diego Altamirano,
Peter Bult,
Deepto Chakrabarty,
Sebastien Guillot,
Gaurava K. Jaisawal,
Christian Malacaria,
Giulio C. Mancuso,
Andrea Sanna,
Jean H. Swank
Abstract:
We present temporal and time-resolved spectral analyses of all the thermonuclear X-ray bursts observed from the neutron star low-mass X-ray binary (LMXB) 4U 1728-34 with NICER from June 2017 to September 2019. In total, we detected 11 X-ray bursts from the source and performed time-resolved spectroscopy. Unlike some of the earlier results for other bursting sources from NICER, our spectral results…
▽ More
We present temporal and time-resolved spectral analyses of all the thermonuclear X-ray bursts observed from the neutron star low-mass X-ray binary (LMXB) 4U 1728-34 with NICER from June 2017 to September 2019. In total, we detected 11 X-ray bursts from the source and performed time-resolved spectroscopy. Unlike some of the earlier results for other bursting sources from NICER, our spectral results indicate that the use of a scaling factor for the persistent emission is not statistically necessary. This is primarily a result of the strong interstellar absorption in the line of sight towards 4U 1728-34, which causes the count rates to be significantly lower at low energies. We also searched for burst oscillations and detected modulations in six different bursts at around the previously known burst oscillation frequency of 363 Hz. Finally, we report the detection of oscillations prior to two bursts at 356 and 359 Hz, respectively. This is the first time in the literature where burst oscillations are detected before the rapid rise in X-ray flux, from any known burster. These oscillations disappear as soon as the burst rise starts and occur at a somewhat lower frequency than the oscillations we detect during the bursts.
△ Less
Submitted 18 September, 2023;
originally announced September 2023.
-
Ramulator 2.0: A Modern, Modular, and Extensible DRAM Simulator
Authors:
Haocong Luo,
Yahya Can Tuğrul,
F. Nisa Bostancı,
Ataberk Olgun,
A. Giray Yağlıkçı,
Onur Mutlu
Abstract:
We present Ramulator 2.0, a highly modular and extensible DRAM simulator that enables rapid and agile implementation and evaluation of design changes in the memory controller and DRAM to meet the increasing research effort in improving the performance, security, and reliability of memory systems. Ramulator 2.0 abstracts and models key components in a DRAM-based memory system and their interactions…
▽ More
We present Ramulator 2.0, a highly modular and extensible DRAM simulator that enables rapid and agile implementation and evaluation of design changes in the memory controller and DRAM to meet the increasing research effort in improving the performance, security, and reliability of memory systems. Ramulator 2.0 abstracts and models key components in a DRAM-based memory system and their interactions into shared interfaces and independent implementations. Doing so enables easy modification and extension of the modeled functions of the memory controller and DRAM in Ramulator 2.0. The DRAM specification syntax of Ramulator 2.0 is concise and human-readable, facilitating easy modifications and extensions. Ramulator 2.0 implements a library of reusable templated lambda functions to model the functionalities of DRAM commands to simplify the implementation of new DRAM standards, including DDR5, LPDDR5, HBM3, and GDDR6. We showcase Ramulator 2.0's modularity and extensibility by implementing and evaluating a wide variety of RowHammer mitigation techniques that require different memory controller design changes. These techniques are added modularly as separate implementations without changing any code in the baseline memory controller implementation. Ramulator 2.0 is rigorously validated and maintains a fast simulation speed compared to existing cycle-accurate DRAM simulators. Ramulator 2.0 is open-sourced under the permissive MIT license at https://github.com/CMU-SAFARI/ramulator2
△ Less
Submitted 28 November, 2023; v1 submitted 21 August, 2023;
originally announced August 2023.
-
TuRaN: True Random Number Generation Using Supply Voltage Underscaling in SRAMs
Authors:
İsmail Emir Yüksel,
Ataberk Olgun,
Behzad Salami,
F. Nisa Bostancı,
Yahya Can Tuğrul,
A. Giray Yağlıkçı,
Nika Mansouri Ghiasi,
Onur Mutlu,
Oğuz Ergin
Abstract:
Prior works propose SRAM-based TRNGs that extract entropy from SRAM arrays. SRAM arrays are widely used in a majority of specialized or general-purpose chips that perform the computation to store data inside the chip. Thus, SRAM-based TRNGs present a low-cost alternative to dedicated hardware TRNGs. However, existing SRAM-based TRNGs suffer from 1) low TRNG throughput, 2) high energy consumption,…
▽ More
Prior works propose SRAM-based TRNGs that extract entropy from SRAM arrays. SRAM arrays are widely used in a majority of specialized or general-purpose chips that perform the computation to store data inside the chip. Thus, SRAM-based TRNGs present a low-cost alternative to dedicated hardware TRNGs. However, existing SRAM-based TRNGs suffer from 1) low TRNG throughput, 2) high energy consumption, 3) high TRNG latency, and 4) the inability to generate true random numbers continuously, which limits the application space of SRAM-based TRNGs. Our goal in this paper is to design an SRAM-based TRNG that overcomes these four key limitations and thus, extends the application space of SRAM-based TRNGs. To this end, we propose TuRaN, a new high-throughput, energy-efficient, and low-latency SRAM-based TRNG that can sustain continuous operation. TuRaN leverages the key observation that accessing SRAM cells results in random access failures when the supply voltage is reduced below the manufacturer-recommended supply voltage. TuRaN generates random numbers at high throughput by repeatedly accessing SRAM cells with reduced supply voltage and post-processing the resulting random faults using the SHA-256 hash function. To demonstrate the feasibility of TuRaN, we conduct SPICE simulations on different process nodes and analyze the potential of access failure for use as an entropy source. We verify and support our simulation results by conducting real-world experiments on two commercial off-the-shelf FPGA boards. We evaluate the quality of the random numbers generated by TuRaN using the widely-adopted NIST standard randomness tests and observe that TuRaN passes all tests. TuRaN generates true random numbers with (i) an average (maximum) throughput of 1.6Gbps (1.812Gbps), (ii) 0.11nJ/bit energy consumption, and (iii) 278.46us latency.
△ Less
Submitted 20 November, 2022;
originally announced November 2022.
-
Sectored DRAM: A Practical Energy-Efficient and High-Performance Fine-Grained DRAM Architecture
Authors:
Ataberk Olgun,
F. Nisa Bostanci,
Geraldo F. Oliveira,
Yahya Can Tugrul,
Rahul Bera,
A. Giray Yaglikci,
Hasan Hassan,
Oguz Ergin,
Onur Mutlu
Abstract:
We propose Sectored DRAM, a new, low-overhead DRAM substrate that reduces wasted energy by enabling fine-grained DRAM data transfers and DRAM row activation. Sectored DRAM leverages two key ideas to enable fine-grained data transfers and row activation at low chip area cost. First, a cache block transfer between main memory and the memory controller happens in a fixed number of clock cycles where…
▽ More
We propose Sectored DRAM, a new, low-overhead DRAM substrate that reduces wasted energy by enabling fine-grained DRAM data transfers and DRAM row activation. Sectored DRAM leverages two key ideas to enable fine-grained data transfers and row activation at low chip area cost. First, a cache block transfer between main memory and the memory controller happens in a fixed number of clock cycles where only a small portion of the cache block (a word) is transferred in each cycle. Sectored DRAM augments the memory controller and the DRAM chip to execute cache block transfers in a variable number of clock cycles based on the workload access pattern with minor modifications to the memory controller's and the DRAM chip's circuitry. Second, a large DRAM row, by design, is already partitioned into smaller independent physically isolated regions. Sectored DRAM provides the memory controller with the ability to activate each such region based on the workload access pattern via small modifications to the DRAM chip's array access circuitry. Activating smaller regions of a large row relaxes DRAM power delivery constraints and allows the memory controller to schedule DRAM accesses faster.
Compared to a system with coarse-grained DRAM, Sectored DRAM reduces the DRAM energy consumption of highly-memory-intensive workloads by up to (on average) 33% (20%) while improving their performance by up to (on average) 36% (17%). Sectored DRAM's DRAM energy savings, combined with its system performance improvement, allows system-wide energy savings of up to 23%. Sectored DRAM's DRAM chip area overhead is 1.7% the area of a modern DDR4 chip. We hope and believe that Sectored DRAM's ideas and results will help to enable more efficient and high-performance memory systems. To this end, we open source Sectored DRAM at https://github.com/CMU-SAFARI/Sectored-DRAM.
△ Less
Submitted 9 June, 2024; v1 submitted 27 July, 2022;
originally announced July 2022.
-
Burst-Disk Interaction in 4U 1636-536 as observed by NICER
Authors:
Tolga Guver,
Funda Bostanci,
Tugba Boztepe,
Ersin Gogus,
Peter Bult,
Unnati Kashyap,
Manoneeta Chakraborty,
David R. Ballantyne,
Renee Ludlam,
Christian Malacaria,
Gaurava K. Jaisawal,
Tod E. Strohmayer,
Sebastien Guillot
Abstract:
We present the detection of 51 thermonuclear X-ray bursts observed from 4U 1636-536 by the Neutron Star Interior Composition Explorer (NICER) over the course of a three year monitoring campaign. We performed time resolved spectroscopy for 40 of these bursts and showed the existence of a strong soft excess in all the burst spectra. The excess emission can be characterized by the use of a scaling fa…
▽ More
We present the detection of 51 thermonuclear X-ray bursts observed from 4U 1636-536 by the Neutron Star Interior Composition Explorer (NICER) over the course of a three year monitoring campaign. We performed time resolved spectroscopy for 40 of these bursts and showed the existence of a strong soft excess in all the burst spectra. The excess emission can be characterized by the use of a scaling factor (f_a method) to the persistent emission of the source, which is attributed to the increased mass accretion rate on to the neutron star due to Poynting-Robertson drag. The soft excess emission can also be characterized by the use of a model taking into account the reflection of the burst emission off of the accretion disk. We also present time resolved spectral analysis of 5 X-ray bursts simultaneously observed by NICER and AstroSat, which confirm the main results with even greater precision. Finally, we present evidence for Compton cooling using 7 X-ray bursts observed contemporaneously with \nustar, by means of a correlated decrease in the hard X-ray lightcurve of 4U 1636-536 as the bursts start.
△ Less
Submitted 8 July, 2022;
originally announced July 2022.
-
DR-STRaNGe: End-to-End System Design for DRAM-based True Random Number Generators
Authors:
F. Nisa Bostancı,
Ataberk Olgun,
Lois Orosa,
A. Giray Yağlıkçı,
Jeremie S. Kim,
Hasan Hassan,
Oğuz Ergin,
Onur Mutlu
Abstract:
Random number generation is an important task in a wide variety of critical applications including cryptographic algorithms, scientific simulations, and industrial testing tools. True Random Number Generators (TRNGs) produce truly random data by sampling a physical entropy source that typically requires custom hardware and suffers from long latency. To enable high-bandwidth and low-latency TRNGs o…
▽ More
Random number generation is an important task in a wide variety of critical applications including cryptographic algorithms, scientific simulations, and industrial testing tools. True Random Number Generators (TRNGs) produce truly random data by sampling a physical entropy source that typically requires custom hardware and suffers from long latency. To enable high-bandwidth and low-latency TRNGs on commodity devices, recent works propose TRNGs that use DRAM as an entropy source. Although prior works demonstrate promising DRAM-based TRNGs, integration of such mechanisms into real systems poses challenges. We identify three challenges for using DRAM-based TRNGs in current systems: (1) generating random numbers can degrade system performance by slowing down concurrently-running applications due to the interference between RNG and regular memory operations in the memory controller (i.e., RNG interference), (2) this RNG interference can degrade system fairness by unfairly prioritizing applications that intensively use random numbers (i.e., RNG applications), and (3) RNG applications can experience significant slowdowns due to the high RNG latency. We propose DR-STRaNGe, an end-to-end system design for DRAM-based TRNGs that (1) reduces the RNG interference by separating RNG requests from regular requests in the memory controller, (2) improves the system fairness with an RNG-aware memory request scheduler, and (3) hides the large TRNG latencies using a random number buffering mechanism with a new DRAM idleness predictor that accurately identifies idle DRAM periods. We evaluate DR-STRaNGe using a set of 186 multiprogrammed workloads. Compared to an RNG-oblivious baseline system, DR-STRaNGe improves the average performance of non-RNG and RNG applications by 17.9% and 25.1%, respectively. DR-STRaNGe improves average system fairness by 32.1% and reduces average energy consumption by 21%.
△ Less
Submitted 6 June, 2022; v1 submitted 4 January, 2022;
originally announced January 2022.
-
A NICER look at thermonuclear X-ray bursts from Aql X-1
Authors:
Tolga Guver,
Tugba Boztepe,
David R. Ballantyne,
Z. Funda Bostanci,
Peter Bult,
Gaurava K. Jaisawal,
Ersin Gogus,
Tod E. Strohmayer,
Diego Altamirano,
Sebastien Guillot,
Deepto Chakrabarty
Abstract:
We present spectral and temporal properties of all the thermonuclear X-ray bursts observed from Aql X-1 by the Neutron Star Interior and Composition Explorer (NICER) between 2017 July and 2021 April. This is the first systematic investigation of a large sample of type I X-ray bursts from Aql X-1 with improved sensitivity at low energies. We detect 22 X-ray bursts including two short recurrence bur…
▽ More
We present spectral and temporal properties of all the thermonuclear X-ray bursts observed from Aql X-1 by the Neutron Star Interior and Composition Explorer (NICER) between 2017 July and 2021 April. This is the first systematic investigation of a large sample of type I X-ray bursts from Aql X-1 with improved sensitivity at low energies. We detect 22 X-ray bursts including two short recurrence burst events in which the separation was only 451 s and 496 s. We perform time resolved spectroscopy of the bursts using the fixed and scaled background (f_a method) approaches. We show that the use of a scaling factor to the pre-burst emission is the statistically preferred model in about 68% of all the spectra compared to the fixed background approach. Typically the f_a values are clustered around 1-3, but can reach up to 11 in a burst where photospheric radius expansion is observed. Such f_a values indicate a very significant increase in the pre-burst emission especially at around the peak flux moments of the bursts. We show that the use of the f_a factor alters the best fit spectral parameters of the burst emission. Finally, we employed a reflection model instead of scaling the pre-burst emission. We show that reflection models also do fit the spectra and improve the goodness of the fits. In all cases we see that the disc is highly ionized by the burst emission and the fraction of the reprocessed emission to the incident burst flux is typically clustered around 20%.
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
A Study of Open Clusters Frolov 1 and NGC 7510 using CCD UBV Photometry and Gaia DR2 Astrometry
Authors:
T. Yontan,
S. Bilir,
T. Ak,
B. Akbulut,
R. Canbay,
T. Banks,
E. Paunzen,
S. Ak,
Z. F. Bostanci
Abstract:
We present reddening, photometric metallicity, age and distance estimates for the Frolov 1 and NGC 7510 open clusters based on CCD UBV photometric and Gaia data. Photometric observations were collected using the 1-m telescope of the TÜBİTAK National Observatory. Gaia DR2 proper motion data in the direction of two grou**s were used to identify cluster membership. We determined mean proper motion…
▽ More
We present reddening, photometric metallicity, age and distance estimates for the Frolov 1 and NGC 7510 open clusters based on CCD UBV photometric and Gaia data. Photometric observations were collected using the 1-m telescope of the TÜBİTAK National Observatory. Gaia DR2 proper motion data in the direction of two grou**s were used to identify cluster membership. We determined mean proper motion values ($ μ_α\cosδ, μ_δ$) = ($-3.02\pm 0.10$, $-1.75 \pm 0.08$) and ($-3.66 \pm 0.07$, $-2.17 \pm 0.06$) mas yr$^{-1}$ for Frolov 1 and NGC 7510, respectively. We used two-colour diagrams to obtain $E(B-V)$ colour excesses for Frolov 1 and NGC 7510 as $0.65\pm0.06$ and $1.05\pm0.05$ mag, respectively. We derived the photometric metallicity of Frolov 1 as [Fe/H] = 0.03$\pm$0.03 dex and adopted a solar metallicity for NGC 7510. Based on these reddening and metallicities we determined the distance moduli and ages of the clusters via fitting PARSEC isochrones to the cluster colour-magnitude diagrams. Isochrone fitting distances for Frolov 1 and NGC 7510 are $2864 \pm 254$ and $2818 \pm 247$ pc, respectively, which correspond to the ages $35\pm 10$ Myr and $18\pm 6$ Myr. We also calculated mean Gaia distances and compared them with those given in the literature and in this study, concluding that our results are in good agreement with previous work. Finally, we calculated the mass function slopes as being $X=-1.21\pm0.18$ for Frolov 1 and $X=-1.42\pm0.27$ for NGC 7510.
△ Less
Submitted 22 December, 2020;
originally announced December 2020.
-
Metallicity and absolute magnitude calibrations for F-G type main-sequence stars in the Gaia era
Authors:
M. Celebi,
S. Bilir,
S. Ak,
T. Ak,
Z. F. Bostanci,
T. Yontan
Abstract:
In this study, photometric metallicity and absolute magnitude calibrations were derived using F-G spectral type main-sequence stars in the Solar neighbourhood with precise spectroscopic, photometric and Gaia astrometric data for UBV photometry. The sample consists of 504 main-sequence stars covering the temperature, surface gravity and colour index intervals $5300<T_{eff} < 7300$ K, $\log g > 4$ (…
▽ More
In this study, photometric metallicity and absolute magnitude calibrations were derived using F-G spectral type main-sequence stars in the Solar neighbourhood with precise spectroscopic, photometric and Gaia astrometric data for UBV photometry. The sample consists of 504 main-sequence stars covering the temperature, surface gravity and colour index intervals $5300<T_{eff} < 7300$ K, $\log g > 4$ (cgs) and $0.3<(B-V)_0<0.8$ mag, respectively. Stars with relative trigonometric parallax errors $σ_π/π\leq0.01$ were preferred from Gaia DR2 data for the estimation of their $M_V$ absolute magnitudes. In order to obtain calibrations, $(U-B)_0$ and $(B-V)_0$ colour indices of stars were preferred and a multi-variable second order equation was used. Calibrations are valid for main-sequence stars in the metallicity and absolute magnitude ranges $-2<{\rm [Fe/H]}<0.5$ dex and $2.5<M_V<6$ mag, respectively. The mean value and standard deviation of the differences between original and estimated values for the metal abundance and absolute magnitude are $\langleΔ{\rm[Fe/H]}\rangle=0.00\pm0.11$ dex and $\langleΔM_V \rangle=0.00\pm0.22$ mag, respectively. In this work, it has been shown that more precise iron abundance and absolute magnitude values were obtained with the new calibrations, compared to previous calibrations in the literature.
△ Less
Submitted 2 October, 2019;
originally announced October 2019.
-
CCD UBV photometric and Gaia astrometric study of eight open clusters- ASCC 115, Collinder 421, NGC 6793, NGC 7031, NGC 7039, NGC 7086, Roslund 1 and Stock 21
Authors:
T. Yontan,
S. Bilir,
Z. F. Bostanci,
T. Ak,
S. Ak,
T. Guver,
E. Paunzen,
H. Urgup,
M. Celebi,
B. A. Akti,
S. Gokmen
Abstract:
In this study, we carried out CCD UBV photometry of eight open clusters, ASCC 115, Collinder 421, NGC 6793, NGC 7031, NGC 7039, NGC 7086, Roslund 1, Stock 21, and determined their reddening, metallicity, distance, age, and mass functions. We used new Gaia Data Release 2 (DR2) astrometric data to separate cluster member stars from the field stars and obtain precise structural and astrophysical para…
▽ More
In this study, we carried out CCD UBV photometry of eight open clusters, ASCC 115, Collinder 421, NGC 6793, NGC 7031, NGC 7039, NGC 7086, Roslund 1, Stock 21, and determined their reddening, metallicity, distance, age, and mass functions. We used new Gaia Data Release 2 (DR2) astrometric data to separate cluster member stars from the field stars and obtain precise structural and astrophysical parameters. To identify cluster member stars we utilized an unsupervised membership assignment code (UPMASK), which is based on the photometric and astrometric data. The density distributions for the open clusters show good fits with the empirical King model except for Roslund 1 and Stock 21 not having central concentration. The colour excesses and metallicities were derived separately using U-B vs B-V two-colour diagrams. Kee** these parameters as constants, we simultaneously calculated distance moduli and ages of the clusters from V vs B-V and V vs U-B colour-magnitude diagrams using PARSEC theoretical isochrones. Taking into account Gaia DR2 proper motion components and parallaxes of the member stars, we also calculated mean proper motions and distances for the clusters. Distances derived both from isochrone fitting to colour-magnitude diagrams of the clusters and Gaia DR2 trigonometric parallaxes are compatible with each other. Slopes of the mass functions of the eight open clusters are in good agreement with Salpeter (1955) value of 1.35.
△ Less
Submitted 1 September, 2019;
originally announced September 2019.
-
CCD UBV photometric study of five open clusters - Dolidze 36, NGC 6728, NGC 6800, NGC 7209 and Platais 1
Authors:
Z. F. Bostanci,
T. Yontan,
S. Bilir,
T. Ak,
T. Guver,
S. Ak,
E. Paunzen,
C. S. Basaran,
E. Vurgun,
A. B. Akti,
M. Celebi,
H. Urgup
Abstract:
In this study, we present CCD UBV photometry of poorly studied open star clusters, Dolidze 36, NGC 6728, NGC 6800, NGC 7209, and Platais 1, located in the first and second Galactic quadrants. Observations were obtained with T100, the 1-m telescope of the TUBITAK National Observatory. Using photometric data, we determined several astrophysical parameters such as reddening, distance, metallicity and…
▽ More
In this study, we present CCD UBV photometry of poorly studied open star clusters, Dolidze 36, NGC 6728, NGC 6800, NGC 7209, and Platais 1, located in the first and second Galactic quadrants. Observations were obtained with T100, the 1-m telescope of the TUBITAK National Observatory. Using photometric data, we determined several astrophysical parameters such as reddening, distance, metallicity and ages and from them, initial mass functions, integrated magnitudes and colours. We took into account the proper motions of the observed stars to calculate the membership probabilities. The colour excesses and metallicities were determined independently using two-colour diagrams. After obtaining the colour excesses of the clusters Dolidze 36, NGC 6728, NGC 6800, NGC 7209, and Platais 1 as $0.19\pm0.06$, $0.15\pm0.05$, $0.32\pm0.05$, $0.12\pm0.04$, and $0.43\pm0.06$ mag, respectively, the metallicities are found to be $0.00\pm0.09$, $0.02\pm0.11$, $0.03\pm0.07$, $0.01\pm0.08$, and $0.01\pm0.08$ dex, respectively. Furthermore, using these parameters, distance moduli and age of the clusters were also calculated from colour-magnitude diagrams simultaneously using PARSEC theoretical models. The distances to the clusters Dolidze 36, NGC 6728, NGC 6800, NGC 7209, and Platais 1 are $1050\pm90$, $1610\pm190$, $1210\pm150$, $1060\pm 90$, and $1710\pm250$ pc, respectively, while corresponding ages are $400\pm100$, $750\pm150$, $400\pm100$, $600\pm100$, and $175\pm50$ Myr, respectively. Our results are compatible with those found in previous studies. The mass function of each cluster is derived. The slopes of the mass functions of the open clusters range from 1.31 to 1.58, which are in agreement with Salpeter's initial mass function. We also found integrated absolute magnitudes varying from -4.08 to -3.40 for the clusters.
△ Less
Submitted 4 June, 2018;
originally announced June 2018.
-
Metallicity Calibration and Photometric Parallax Estimation: II. SDSS photometry
Authors:
S. Tuncel Guctekin,
S. Bilir,
S. Karaali,
O. Plevne,
S. Ak,
T. Ak,
Z. F. Bostanci
Abstract:
We used the updated [Fe/H] abundances of 168 F-G type dwarfs and calibrated them to a third order polynomial in terms of reduced ultraviolet excess, $δ_{0.41}$ defined with $ugr$ data in the SDSS. We estimated the $M_g$ absolute magnitudes for the same stars via the re-reduced Hipparcos parallaxes and calibrated the absolute magnitude offsets, $ΔM_g$, relative to the intrinsic sequence of Hyades t…
▽ More
We used the updated [Fe/H] abundances of 168 F-G type dwarfs and calibrated them to a third order polynomial in terms of reduced ultraviolet excess, $δ_{0.41}$ defined with $ugr$ data in the SDSS. We estimated the $M_g$ absolute magnitudes for the same stars via the re-reduced Hipparcos parallaxes and calibrated the absolute magnitude offsets, $ΔM_g$, relative to the intrinsic sequence of Hyades to a third order polynomial in terms of $δ_{0.41}$. The ranges of the calibrations are $-2<$[Fe/H]$\leq$0.3 dex and $4<M_g\leq6$ mag. The mean of the residuals and the corresponding standard deviation for the metallicity calibration are 0 and 0.137 mag; while, for the absolute magnitude calibration they are 0 and 0.179 mag, respectively. We applied our procedures to 23,414 dwarf stars in the Galactic field with the Galactic coordinates $85^{\circ}\leq b\leq90^{\circ}$, $0^{\circ}\leq l\leq360^{\circ}$ and size 78 deg$^{2}$. We estimated absolute magnitude $M_g$ dependent vertical metallicity gradients as a function of vertical distance $Z$. The gradients are deep in the range of $0<Z\leq5$ kpc, while they are very small positive numbers beyond $Z=5$ kpc. All dwarfs with $5<M_g\leq6$ mag are thin-disc stars and their distribution shows a mode at $(g-r)_0\approx 0.38$ mag, while the absolute magnitudes $4<M_g\leq5$ are dominated by thick disc and halo stars, i.e. the apparently bright ones ($g_0\leq18$ mag) are thick-disc stars with a mode at $(g-r)_0\sim0.38$ mag, while the halo population is significant in the faint stars ($g_0>18$ mag).
△ Less
Submitted 1 September, 2017; v1 submitted 24 November, 2016;
originally announced November 2016.
-
Local Stellar Kinematics from RAVE data - VII. Metallicity Gradients from Red Clump Stars
Authors:
O. Onal Tas,
S. Bilir,
G. M. Seabroke,
S. Karaali,
S. Ak,
T. Ak,
Z. F. Bostanci
Abstract:
We investigate the Milky Way Galaxy's radial and vertical metallicity gradients using a sample of 47,406 red clump stars from the RAVE DR4. This sample is more than twice the size of the largest sample in the literature investigating radial and vertical metallicity gradients. The absolute magnitude of Groenewegen (2008) is used to determine distances to our sample stars. The resulting distances ag…
▽ More
We investigate the Milky Way Galaxy's radial and vertical metallicity gradients using a sample of 47,406 red clump stars from the RAVE DR4. This sample is more than twice the size of the largest sample in the literature investigating radial and vertical metallicity gradients. The absolute magnitude of Groenewegen (2008) is used to determine distances to our sample stars. The resulting distances agree with the RAVE DR4 distances Binney et al. (2014) of the same stars. Our photometric method also provides distances to 6185 stars that are not assigned a distance in RAVE DR4. The metallicity gradients are calculated with their current orbital positions ($R_{gc}$ and $Z$) and with their orbital properties (mean Galactocentric distance, $R_{m}$ and $z_{max}$), as a function of the distance to the Galactic plane: d[Fe/H]/d$R_{gc}=$-$0.047\pm0.003$ dex/kpc for $0\leq |Z|\leq0.5$ kpc and d[Fe/H]/d$R_m=$-$0.025\pm0.002$ dex/kpc for $0\leq z_{max}\leq0.5$ kpc. This reaffirms the radial metallicity gradient in the thin disc but highlights that gradients are sensitive to the selection effects caused by the difference between $R_{gc}$ and $R_{m}$. The radial gradient is flat in the distance interval 0.5-1 kpc from the plane and then becomes positive greater than 1 kpc from the plane. The radial metallicity gradients are also eccentricity dependent. We showed that d[Fe/H]/d$R_m=$-$0.089\pm0.010$, -$0.073\pm0.007$, -$0.053\pm0.004$ and -$0.044\pm0.002$ dex/kpc for $e_p\leq0.05$, $e_p\leq0.07$, $e_p\leq0.10$ and $e_p\leq0.20$ sub-samples, respectively, in the distance interval $0\leq z_{max}\leq0.5$ kpc. Similar trend is found for vertical metallicity gradients. Both the radial and vertical metallicity gradients are found to become shallower as the eccentricity of the sample increases. These findings can be used to constrain different formation scenarios of the thick and thin discs.
△ Less
Submitted 24 July, 2016;
originally announced July 2016.
-
CCD UBV Photometry and Kinematics of the Open Cluster NGC 225
Authors:
S. Bilir,
Z. F. Bostanci,
T. Yontan,
T. Guver,
V. Bakis,
T. Ak,
S. Ak,
E. Paunzen,
Z. Eker
Abstract:
We present the results of CCD $UBV$ photometric and spectroscopic observations of the open cluster NGC 225. In order to determine the structural parameters of NGC 225, we calculated the stellar density profile in the cluster's field. We estimated the probabilities of the stars being physical members of the cluster using the existing astrometric data. The most likely members of the cluster were use…
▽ More
We present the results of CCD $UBV$ photometric and spectroscopic observations of the open cluster NGC 225. In order to determine the structural parameters of NGC 225, we calculated the stellar density profile in the cluster's field. We estimated the probabilities of the stars being physical members of the cluster using the existing astrometric data. The most likely members of the cluster were used in the determination of the astrophysical parameters of the cluster. We calculated the mean radial velocity of the cluster as $V_{r}=-8.3\pm 5.0$ km s$^{-1}$ from the optical spectra of eight stars in the cluster's field. Using the U-B vs B-V two-colour diagram and UV excesses of the F-G type main-sequence stars, the reddening and metallicity of NGC 225 were inferred as $E(B-V)=0.151\pm 0.047$ mag and $[Fe/H]=-0.11\pm 0.01$ dex, respectively. We fitted the colour-magnitude diagrams of NGC 225 with the PARSEC isochrones and derived the distance modulus, distance and age of the cluster as $μ_{V}=9.3\pm 0.07$ mag, d=585$\pm$20 pc and $t=900\pm 100$ Myr, respectively. We also estimated the galactic orbital parameters and space velocity components of the cluster and found that the cluster has a slightly eccentric orbit of $e=0.07\pm 0.01$ and an orbital period of $P_{orb}= 255\pm 5$ Myr.
△ Less
Submitted 28 June, 2016;
originally announced June 2016.
-
Metallicity Calibration and Photometric Parallax Estimation: I. UBV photometry
Authors:
S. Tuncel Guctekin,
S. Bilir,
S. Karaali,
S. Ak,
T. Ak,
Z. F. Bostanci
Abstract:
We present metallicity and photometric parallax calibrations for the F and G type dwarfs with photometric, astrometric and spectroscopic data. The sample consists of 168 dwarf stars covering the colour, iron abundance and absolute magnitude intervals $0.30<(B-V)_0<0.68$ mag, $-2.0<[Fe/H]<0.4$ dex and $3.4<M_V<6.0$ mag, respectively. The means and standard deviations of the metallicity and absolute…
▽ More
We present metallicity and photometric parallax calibrations for the F and G type dwarfs with photometric, astrometric and spectroscopic data. The sample consists of 168 dwarf stars covering the colour, iron abundance and absolute magnitude intervals $0.30<(B-V)_0<0.68$ mag, $-2.0<[Fe/H]<0.4$ dex and $3.4<M_V<6.0$ mag, respectively. The means and standard deviations of the metallicity and absolute magnitude residuals are small, i.e. $\langleΔ[Fe/H]_{res}\rangle=0$ and $σ=0.134$ dex, and $\langleΔ(M_V)_{res}\rangle=0$ and $σ=0.174$ mag, respectively, which indicate accurate metallicity and photometric parallax estimations.
△ Less
Submitted 7 May, 2016;
originally announced May 2016.
-
CCD UBV photometry of the open cluster NGC 6819
Authors:
T. Ak,
Z. F. Bostanci,
T. Yontan,
S. Bilir,
T. Guver,
S. Ak,
H. Urgup,
E. Paunzen
Abstract:
We present the results of CCD UBV observations of the open cluster NGC 6819. We calculated the stellar density profile in the cluster's field to determine the structural parameters of NGC 6819. Using the existing astrometric data, we calculated the probabilities of the stars being physical members of the cluster, and used these objects in the determination of the astrophysical parameters of NGC 68…
▽ More
We present the results of CCD UBV observations of the open cluster NGC 6819. We calculated the stellar density profile in the cluster's field to determine the structural parameters of NGC 6819. Using the existing astrometric data, we calculated the probabilities of the stars being physical members of the cluster, and used these objects in the determination of the astrophysical parameters of NGC 6819. We inferred the reddening and metallicity of the cluster as $E(B-V)=0.130\pm0.035$ mag and $[Fe/H]=+0.051\pm 0.020$ dex, respectively, using the U-B vs B-V two-colour diagram and UV excesses of the F-G type main-sequence stars. We fit the colour-magnitude diagrams of NGC6819 with the PARSEC isochrones and derived the distance modula, distance and age of the cluster as $μ_{V}=12.22\pm 0.10$ mag, $d=2309\pm106$ pc and $t=2.4\pm0.2$ Gyr, respectively. The parameters of the galactic orbit estimated for NGC 6819 indicate that the cluster is orbiting in a slightly eccentric orbit of $e=0.06$ with a period of $P_{orb}=142$ Myr. The slope of the mass function estimated for the cluster is close to the one found for the stars in the solar neighbourhood.
△ Less
Submitted 1 March, 2016;
originally announced March 2016.
-
Local Stellar Kinematics from RAVE data - VI. Metallicity Gradients Based on the F-G Main-sequence Stars
Authors:
O. Plevne,
T. Ak,
S. Karaali,
S. Bilir,
S. Ak,
Z. F. Bostanci
Abstract:
We estimated iron and metallicity gradients in the radial and vertical directions with the F and G type dwarfs taken from the RAVE DR4 database. The sample defined by the constraints Zmax<=825 pc and ep<=0.10 consists of stars with metal abundances and space velocity components agreeable with the thin-disc stars. The radial iron and metallicity gradients estimated for the vertical distance interva…
▽ More
We estimated iron and metallicity gradients in the radial and vertical directions with the F and G type dwarfs taken from the RAVE DR4 database. The sample defined by the constraints Zmax<=825 pc and ep<=0.10 consists of stars with metal abundances and space velocity components agreeable with the thin-disc stars. The radial iron and metallicity gradients estimated for the vertical distance intervals 0<Zmax<=500 and 500<Zmax<=800 pc are d[Fe/H]/dRm=-0.083(0.030) and d[Fe/H]/dRm=-0.048(0.037 )dex/kpc; and d[M/H]/dRm=-0.063(0.011) and d[M/H]/dRm=-0.028(0.057) dex/kpc, respectively, where Rm is the mean Galactocentric distance. The iron and metallicity gradients for less number of stars at further vertical distances, 800<Zmax<=1500 pc, are mostly positive. Compatible iron and metallicity gradients could be estimated with guiding radius (Rg) for the same vertical distance intervals 0<Zmax<=500 and 500<Zmax<=800 pc, i.e. d[Fe/H]/dRg=-0.083(0.030) and d[Fe/H]/dRg=-0.065(0.039) dex/kpc; d[M/H]/dRg=-0.062(0.018) and d[M/H]/dRg=-0.055(0.045) dex/kpc. F and G type dwarfs on elongated orbits show a complicated radial iron and metallicity gradient distribution in different vertical distance intervals. Significant radial iron and metallicity gradients could be derived neither for the sub-sample stars with Rm<=8 kpc, nor for the ones at larger distances, Rm>8 kpc. The range of the iron and metallicity abundance for the F and G type dwarfs on elongated orbits, [-0.13, -0.01), is similar to the thin-disc stars, while at least half of their space velocity components agree better with those of the thick-disc stars. The vertical iron gradients estimated for the F and G type dwarfs on circular orbits are d[Fe/H]/dZmax=-0.176(0.039) dex/kpc and d[Fe/H]/dZmax=-0.119(0.036) dex/kpc for the intervals Zmax<= 825 and Zmax<=1500 pc, respectively.
△ Less
Submitted 6 October, 2015;
originally announced October 2015.
-
A comprehensive study of the open cluster NGC 6866
Authors:
Z. F. Bostanci,
T. Ak,
T. Yontan,
S. Bilir,
T. Guver,
S. Ak,
O. Cakirli,
O. Ozdarcan,
E. Paunzen,
P. De Cat,
J. N. Fu,
Y. Zhang,
Y. Hou,
G. Li,
Y. Wang,
W. Zhan,
J. Shi,
Y. Wu
Abstract:
We present CCD $UBVRI$ photometry of the field of the open cluster NGC 6866. Structural parameters of the cluster are determined utilizing the stellar density profile of the stars in the field. We calculate the probabilities of the stars being a physical member of the cluster using their astrometric data and perform further analyses using only the most probable members. The reddening and metallici…
▽ More
We present CCD $UBVRI$ photometry of the field of the open cluster NGC 6866. Structural parameters of the cluster are determined utilizing the stellar density profile of the stars in the field. We calculate the probabilities of the stars being a physical member of the cluster using their astrometric data and perform further analyses using only the most probable members. The reddening and metallicity of the cluster were determined by independent methods. The LAMOST spectra and the ultraviolet excess of the F and G type main-sequence stars in the cluster indicate that the metallicity of the cluster is about the solar value. We estimated the reddening $E(B-V)=0.074 \pm 0.050$ mag using the $U-B$ vs $B-V$ two-colour diagram. The distance modula, the distance and the age of NGC 6866 were derived as $μ= 10.60 \pm 0.10$ mag, $d=1189 \pm 75$ pc and $t = 813 \pm 50$ Myr, respectively, by fitting colour-magnitude diagrams of the cluster with the PARSEC isochrones. The Galactic orbit of NGC 6866 indicates that the cluster is orbiting in a slightly eccentric orbit with $e=0.12$. The mass function slope $x=1.35 \pm 0.08$ was derived by using the most probable members of the cluster.
△ Less
Submitted 21 July, 2015;
originally announced July 2015.
-
Short Gamma-Ray Bursts with Extended Emission Observed with Swift/BAT and Fermi/GBM
Authors:
Y. Kaneko,
Z. F. Bostanci,
E. Gogus,
L. Lin
Abstract:
Some short GRBs are followed by longer extended emission, lasting anywhere from ~10 to ~100 s. These short GRBs with extended emission (EE) can possess observational characteristics of both short and long GRBs (as represented by GRB 060614), and the traditional classification based on the observed duration places some of them in the long GRB class. While GRBs with EE pose a challenge to the compac…
▽ More
Some short GRBs are followed by longer extended emission, lasting anywhere from ~10 to ~100 s. These short GRBs with extended emission (EE) can possess observational characteristics of both short and long GRBs (as represented by GRB 060614), and the traditional classification based on the observed duration places some of them in the long GRB class. While GRBs with EE pose a challenge to the compact binary merger scenario, they may therefore provide an important link between short and long duration events. To identify the population of GRBs with EE regardless of their initial classifications, we performed a systematic search of short GRBs with EE using all available data (up to February 2013) of both Swift/BAT and Fermi/GBM. The search identified 16 BAT and 14 GBM detected GRBs with EE, several of which are common events observed with both detectors. We investigated their spectral and temporal properties for both the spikes and the EE, and examined correlations among these parameters. Here we present the results of the systematic search as well as the properties of the identified events. Finally, their properties are also compared with short GRBs with EE observed with BATSE, identified through our previous search effort. We found several strong correlations among parameters, especially when all of the samples were combined. Based on our results, a possible progenitor scenario of two-component jet is discussed.
△ Less
Submitted 5 August, 2015; v1 submitted 19 June, 2015;
originally announced June 2015.
-
CCD UBVRI photometry of NGC 6811
Authors:
T. Yontan,
S. Bilir,
Z. F. Bostancı,
T. Ak,
S. Karaali,
T. Güver,
S. Ak,
S. Duran,
E. Paunzen
Abstract:
We present the results of CCD UBVRI observations of the open cluster NGC 6811 obtained on 18th July 2012 with the 1m telescope at the TÜBİTAK National Observatory (TUG). Using these photometric results, we determine the structural and astrophysical parameters of the cluster. The mean photometric uncertainties are better than 0.02 mag in the V magnitude and B-V, V-R, and V-I colour indices to about…
▽ More
We present the results of CCD UBVRI observations of the open cluster NGC 6811 obtained on 18th July 2012 with the 1m telescope at the TÜBİTAK National Observatory (TUG). Using these photometric results, we determine the structural and astrophysical parameters of the cluster. The mean photometric uncertainties are better than 0.02 mag in the V magnitude and B-V, V-R, and V-I colour indices to about 0.03 mag for U-B among stars brighter than magnitude V=18. Cluster member stars were separated from the field stars using the Galaxia model of Sharma et al. (2011) together with other techniques. The core radius of the cluster is found to be $r_{c}$=3.60 arcmin. The astrophysical parameters were determined simultaneously via Bayesian statistics using the colour-magnitude diagrams V versus B-V, V versus V-I, V versus V-R, and V versus R-I of the cluster. The resulting most likely parameters were further confirmed using independent methods, removing any possible degeneracies. The colour excess, distance modulus, metallicity and the age of the cluster are determined simultaneously as E(B-V)=0.05$\pm$0.01 mag, $μ=10.06\pm0.08$ mag, [M/H]=-0.10$\pm$0.01 dex and t=1.00$\pm$0.05 Gyr, respectively. Distances of five red clump stars which were found to be members of the cluster further confirm our distance estimation.
△ Less
Submitted 12 October, 2014;
originally announced October 2014.
-
Oscillatory behavior of chromospheric fine structures in a network and a semi-active regions
Authors:
Z. F. Bostanci,
A. Gultekin,
N. Al
Abstract:
In the present work, we study the periodicities of oscillations in dark fine structures using observations of a network and a semi-active region close to the solar disk center. We simultaneously obtained spatially high resolution time series of white light images and narrow band images in the H$α$ line using the 2D Göttingen spectrometer, which were based on two Fabry-Perot interferometers and mou…
▽ More
In the present work, we study the periodicities of oscillations in dark fine structures using observations of a network and a semi-active region close to the solar disk center. We simultaneously obtained spatially high resolution time series of white light images and narrow band images in the H$α$ line using the 2D Göttingen spectrometer, which were based on two Fabry-Perot interferometers and mounted in the VTT/Observatorio del Teide/Tenerife. During the observations, the H$α$ line was scanned at 18 wavelength positions with steps of 125 mÅ. We computed series of Doppler and intensity images by subtraction and addition of the H$α$ $\pm$ 0.3 Å and $\pm$ 0.7 Å pairs, sampling the upper chromosphere and the upper photosphere, respectively. Then we obtained power, coherence and phase difference spectra by performing a wavelet analysis to the Doppler fluctuations. Here, we present comparative results of oscillatory properties of dark fine structures seen in a network and a semi-active region.
△ Less
Submitted 17 June, 2014;
originally announced June 2014.
-
Local stellar kinematics from RAVE data: IV. Solar neighbourhood age-metallicity relation
Authors:
S. Duran,
S. Ak,
S. Bilir,
S. Karaali,
T. Ak,
Z. F. Bostanci,
B. Coskunoglu
Abstract:
We investigated the age-metallicity relation using a sample of 5691 F and G type dwarfs from RAVE DR3 by applying several constraints: i) We selected stars with surface gravities log g < 3.8 and effective temperatures in the 5310<T_{eff}(K)<7300 range and obtained a dwarf sample. ii) We plotted the dwarfs in metallicity sub-samples in the T_{eff}-(J-K_s)_0 plane to compare with the corresponding d…
▽ More
We investigated the age-metallicity relation using a sample of 5691 F and G type dwarfs from RAVE DR3 by applying several constraints: i) We selected stars with surface gravities log g < 3.8 and effective temperatures in the 5310<T_{eff}(K)<7300 range and obtained a dwarf sample. ii) We plotted the dwarfs in metallicity sub-samples in the T_{eff}-(J-K_s)_0 plane to compare with the corresponding data of Gonzalez Hernandez & Bonifacio (2009) and identified the ones in agreement. iii) We fitted the reduced dwarf sample obtained from constraints (i) and (ii) to the Padova isochrones and re-identified those which occupy the plane defined by isochrones with ages t < 13 Gyr. iv) Finally, we omitted dwarfs with total velocity errors larger than 10.63 km/s. We estimated the ages using the Bayesian procedure of Jorgensen & Lindegren (2005). The largest age-metallicity slope was found for early F-type dwarfs. We found steeper slopes when we plotted the data as a function of spectral type rather than Galactic population. We noticed a substantial scatter in metallicity distribution at all ages. The metal-rich old dwarfs turned out to be G-type stars which can be interpreted as they migrated from the inner disc or bulge.
△ Less
Submitted 24 June, 2013;
originally announced June 2013.
-
A New Absolute Magnitude Calibration for Red Clump Stars
Authors:
S. Bilir,
T. Ak,
S. Ak,
T. Yontan,
Z. F. Bostanci
Abstract:
We present an M_V absolute magnitude calibration including the B-V colour and [Fe/H] metallicity for the red clump stars in the globular and open clusters with a wide range of metallicities: M_V = 0.627(0.104)(B-V)o+0.046(0.043)[Fe/H]+0.262(0.111). The calibration equation is valid in the ranges 0.42<(B-V)o<1.20 mag, -1.55<[Fe/H]<+0.40 dex and 0.43<M_V<1.03 mag. We found that the consistencies in…
▽ More
We present an M_V absolute magnitude calibration including the B-V colour and [Fe/H] metallicity for the red clump stars in the globular and open clusters with a wide range of metallicities: M_V = 0.627(0.104)(B-V)o+0.046(0.043)[Fe/H]+0.262(0.111). The calibration equation is valid in the ranges 0.42<(B-V)o<1.20 mag, -1.55<[Fe/H]<+0.40 dex and 0.43<M_V<1.03 mag. We found that the consistencies in the comparisons of the distances estimated from the calibration equation in this study both with the distances obtained from trigonometric parallaxes and spectrophotometric analysis demonstrate that reliable precise absolute magnitudes for the clump giants can be estimated from the calibration formula.
△ Less
Submitted 13 March, 2013;
originally announced March 2013.
-
Gamma Ray Bursts with Extended Emission Observed with BATSE
Authors:
Zahide Funda Bostanci,
Yuki Kaneko,
Ersin Gogus
Abstract:
We present the results of our systematic search for extended emission components following initial short gamma-ray burst (GRB) spikes, using Burst and Transient Source Experiment (BATSE) observations. We performed the extended emission search for both short- and long-duration GRBs to unveil the BATSE population of new hybrid class of GRBs similar to GRB 060614. For the identified bursts, we invest…
▽ More
We present the results of our systematic search for extended emission components following initial short gamma-ray burst (GRB) spikes, using Burst and Transient Source Experiment (BATSE) observations. We performed the extended emission search for both short- and long-duration GRBs to unveil the BATSE population of new hybrid class of GRBs similar to GRB 060614. For the identified bursts, we investigate temporal and spectral characteristics of their initial spikes as well as their extended emission. Our results reveal that the fraction of GRBs with extended emission is ~7% of the total number of our BATSE sample. We find that the spectrum of the extended emission is, in general, softer than that of the initial spike, which is in accord with what has been observed in the prototypical bursts, GRB 060614. We also find that the energy fluence of the extended emission varies on a broad range from 0.1 to 40 times of the fluence of the initial spike. We discuss our results in the context of existing physical models, in particular within the two-component jet model.
△ Less
Submitted 8 October, 2012;
originally announced October 2012.
-
Cloud Modeling of a Network Region in H-alpha
Authors:
Z. F. Bostanci
Abstract:
In this paper, we analyze the physical properties of dark mottles in the chromospheric network using two dimensional spectroscopic observations in H-alpha obtained with the Gottingen Fabry-Perot Spectrometer in the Vacuum Tower Telescope at the Observatory del Teide, Tenerife. Cloud modeling was applied to measure the mottles' optical thickness, source function, Doppler width, and line of sight ve…
▽ More
In this paper, we analyze the physical properties of dark mottles in the chromospheric network using two dimensional spectroscopic observations in H-alpha obtained with the Gottingen Fabry-Perot Spectrometer in the Vacuum Tower Telescope at the Observatory del Teide, Tenerife. Cloud modeling was applied to measure the mottles' optical thickness, source function, Doppler width, and line of sight velocity. Using these measurements, the number density of hydrogen atoms in levels 1 and 2, total particle density, electron density, temperature, gas pressure, and mass density parameters were determined with the method of Tsiropoula & Schmieder (1997). We also analyzed the temporal behaviour of a mottle using cloud parameters. Our result shows that it is dominated by 3 minute signals in source function, and 5 minutes or more in velocity.
△ Less
Submitted 2 August, 2011;
originally announced August 2011.
-
Cloud modeling of a quiet solar region in H-alpha
Authors:
Z. F. Bostanci,
N. Al Erdogan
Abstract:
We present chromospheric cloud modeling on the basis of H-alpha profile-sampling images taken with the Interferometric Bidimensional Spectrometer (IBIS) at the Dunn Solar Telescope (DST). We choose the required reference background profile by using theoretical NLTE profile synthesis. The resulting cloud parameters are converted into estimates of physical parameters (temperature and various densi…
▽ More
We present chromospheric cloud modeling on the basis of H-alpha profile-sampling images taken with the Interferometric Bidimensional Spectrometer (IBIS) at the Dunn Solar Telescope (DST). We choose the required reference background profile by using theoretical NLTE profile synthesis. The resulting cloud parameters are converted into estimates of physical parameters (temperature and various densities). Their mean values compare well with the VAL-C model.
△ Less
Submitted 18 January, 2010;
originally announced January 2010.
-
Temporal evolution of mottles observed in H_alpha
Authors:
Z. Funda Bostanci,
Nurol Al Erdogan
Abstract:
In April 2002, H_alpha observations of the solar chromosphere with high spatial and spectral resolution were obtained with the Gottingen Fabry-Perot Spectrometer mounted in the Vacuum Tower Telescope (VTT) at the Observatorio del Teide/Tenerife. In this work, we analyze a short time sequence of a quiet region with chains of mottles. Some physical parameters of dark mottles are determined by usin…
▽ More
In April 2002, H_alpha observations of the solar chromosphere with high spatial and spectral resolution were obtained with the Gottingen Fabry-Perot Spectrometer mounted in the Vacuum Tower Telescope (VTT) at the Observatorio del Teide/Tenerife. In this work, we analyze a short time sequence of a quiet region with chains of mottles. Some physical parameters of dark mottles are determined by using Beckers' cloud model which takes the source function, the Doppler width, and the velocity to be constant within the cloud along the line of sight. Here, we present the results of our study.
△ Less
Submitted 10 February, 2007;
originally announced February 2007.