-
Reduction of Anisotropic Volume Expansion and the Optimization of Specific Charge Capacity in Lithiated Silicon Nanowires
Authors:
Donald C. Boone
Abstract:
This computational research study analyzes the increase of the specific charge capacity that comes with the reduction of the anisotropic volume expansion during lithium ion insertion within silicon nanowires. This research paper is a continuation from previous work that studied the expansion rate and volume increase. It has been determined that when the lithium ion concentration is decreased by re…
▽ More
This computational research study analyzes the increase of the specific charge capacity that comes with the reduction of the anisotropic volume expansion during lithium ion insertion within silicon nanowires. This research paper is a continuation from previous work that studied the expansion rate and volume increase. It has been determined that when the lithium ion concentration is decreased by regulating the amount of Li ion flux, the lithium ions to silicon atoms ratio, represented by x, decreases within the amorphous lithiated silicon (a-LixSi) material. This results in a decrease in the volumetric strain of the lithiated silicon nanowire as well as a reduction in Maxwell stress that was calculated and Youngs elastic module that was measured experimentally using nanoindentation. The conclusion as will be seen is that as there is a decrease in lithium ion concentration there is a corresponding decrease in anisotropic volume and a resulting increase in specific charge capacity. In fact the amplification of the electromagnetic field due to the electron flux that created detrimental effects for a fully lithiated silicon nanowire at x = 3.75 which resulted in over a 300 percent volume expansion becomes beneficial with the decrease in lithium ion flux as x approaches 0.75, which leads to a marginal volume increase of 25 percent. This could lead to the use of crystalline silicon, c-Si, as an anode material that has been demonstrated in many previous research works to be ten times greater charge capacity than carbon base anode material for lithium ion batteries.
△ Less
Submitted 29 February, 2024;
originally announced February 2024.
-
Quantum Coherent States and Path Integral Method to Stochastically Determine the Anisotropic Volume Expansion in Lithiated Silicon Nanowires
Authors:
Donald C Boone
Abstract:
This computational research study will analyze the multi-physics of lithium ion insertion into a silicon nanowire in an attempt to explain the electrochemical kinetics at the nanoscale and quantum level. The electron coherent states and a quantum field version of photon density waves will be the joining theories that will explain the electron-photon interaction within the lithium-silicon lattice s…
▽ More
This computational research study will analyze the multi-physics of lithium ion insertion into a silicon nanowire in an attempt to explain the electrochemical kinetics at the nanoscale and quantum level. The electron coherent states and a quantum field version of photon density waves will be the joining theories that will explain the electron-photon interaction within the lithium-silicon lattice structure. These two quantum particles will be responsible for the photon absorption rate of silicon atoms that are hypothesized to be the leading cause of breaking diatomic silicon covalent bonds that ultimately leads to volume expansion. It will be demonstrated through the combination of Maxwell stress tensor, optical amplification and path integrals that a stochastic analyze using a variety of Poisson distributions that the anisotropic expansion rates in the <110>, <111> and <112> orthogonal directions confirms the findings ascertained in previous works made by other research groups. The computational findings presented in this work are similar to those which were discovered experimentally using transmission electron microscopy (TEM) and simulation models that used density functional theory (DFT) and molecular dynamics (MD). The refractive index and electric susceptibility parameters of lithiated silicon are interwoven in the first principle theoretical equations and appears frequently throughout this research presentation, which should serve to demonstrate the importance of these parameters in the understanding of this component in lithium ion batteries.
△ Less
Submitted 29 February, 2024; v1 submitted 29 February, 2024;
originally announced February 2024.
-
Density Functional Theory Analysis that Explains the Volume Expansion in Prelithiated Silicon Nanowires
Authors:
Donald C. Boone
Abstract:
This research is a theoretical study that simulates the volume expansion of a prelithiated silicon nanowire during lithium ion insertion and the application of an electric current. Utilizing density functional theory (DFT) the ground state energy E_g (x) of prelithiated silicon (Li_xSi) is define as a function of the lithium ion (Li+) concentration (x). As the Li+ are increased, E_g (x) becomes in…
▽ More
This research is a theoretical study that simulates the volume expansion of a prelithiated silicon nanowire during lithium ion insertion and the application of an electric current. Utilizing density functional theory (DFT) the ground state energy E_g (x) of prelithiated silicon (Li_xSi) is define as a function of the lithium ion (Li+) concentration (x). As the Li+ are increased, E_g (x) becomes increasingly stable from x=1.00 through x=2.415 and decreases in stability as the lithium ion concentration becomes x >2.415 until full lithiation of the silicon nanowire is reached at x=3.75. After the determination of the lithiated silicon ground state energies an electric current is applied to the lithiated silicon nanowire at varies Li+ concentrations x. It was discovered that the volume expansion began at approximately x=3.25 and increased to over 300% of the original volume of a pristine silicon nanowire at x=3.75 which at this point was full lithiation. This is in sharp contrast to prior research studies where the ground state energy was not considered. In previous studies the computation of the volume expansion starts approximately at x=0.75 and produces a continuous nonlinear volume expansion until the process was terminated at full lithiation.
△ Less
Submitted 7 February, 2024; v1 submitted 6 February, 2024;
originally announced February 2024.
-
Coherent States of Multilayer Lithiated Graphene utilizing an Electric Vector Potential
Authors:
Donald C Boone
Abstract:
The computational research that will be presented compares the coherent states of multiple layer graphene versus the coherent states of lithium ions diffused within this multilayer graphene. Unlike the prevailing research on graphene coherent states that uses an external magnetic vector potential, this research will utilize an electric vector potential that is inherent from the electron current de…
▽ More
The computational research that will be presented compares the coherent states of multiple layer graphene versus the coherent states of lithium ions diffused within this multilayer graphene. Unlike the prevailing research on graphene coherent states that uses an external magnetic vector potential, this research will utilize an electric vector potential that is inherent from the electron current density that transverses the π-bonds on the graphene surface. The results from this study will display that the electric vector potential produces energies that can lead to coherent states for graphene and lithiated graphene without the necessity of a strong applied magnetic vector potential. Two excited states will be analyzed for each material. The first excited state (n=1) the graphene coherent state energies lags behind the energies of the lithiated graphene coherent state where as the second excited state (n=2) the coherent state energies of graphene exceeds that of the lithiated graphene coherent state.
△ Less
Submitted 3 May, 2024; v1 submitted 3 April, 2023;
originally announced April 2023.
-
Quantum Mechanical Comparison between Lithiated and Sodiated Silicon Nanowires
Authors:
Donald C. Boone
Abstract:
This computational research study will compare the specific charge capacity (SCC) between lithium ions inserted into crystallize silicon (c-Si) nanowires versus sodium ions inserted into amorphous silicon (a-Si) nanowires. It will be demonstrated that the potential energy V(r) within the lithium-silicon nanowire supports a coherent energy state model with discrete electron particles while the sodi…
▽ More
This computational research study will compare the specific charge capacity (SCC) between lithium ions inserted into crystallize silicon (c-Si) nanowires versus sodium ions inserted into amorphous silicon (a-Si) nanowires. It will be demonstrated that the potential energy V(r) within the lithium-silicon nanowire supports a coherent energy state model with discrete electron particles while the sodium-silicon nanowire potential energy will be discovered to be essentially zero and thus the electron current that travels through the sodiated silicon nanowire will be modeled as free electron with wave-like characteristics. This is due to the vast differences in the electric fields of the lithiated and sodiated silicon nanowires where the electric fields are of the order of 10^(+10)V/m and 10^(-15) V/m respectively. The main reason for the great disparity in electric fields are due to the present of optical amplification within lithium ions and the absence of this process within sodium ions. It will be shown that optical amplification develops coherent optical interactions which is the primary reason for the surge of specific charge capacity in the lithiated silicon nanowire. Conversely, the lack of optical amplification is the reason for the incoherent optical interactions within sodium ions which is the reason for the low presence of SCC in sodiated silicon nanowires.
△ Less
Submitted 8 March, 2024; v1 submitted 13 September, 2022;
originally announced September 2022.
-
Second Harmonic Generation in Lithiated Silicon Nanowires: Derivations and Computational Methods
Authors:
Donald C. Boone
Abstract:
This research will examine the computational methods to calculate the nonlinear optical process of second harmonic generation (SHG) that will be hypothesized to be present during lithium ion insertion into silicon nanowires. First it will be determined whether the medium in which SHG is conveyed is non-centrosymmetric or whether the medium is inversion symmetric where SHG as a part of the second-o…
▽ More
This research will examine the computational methods to calculate the nonlinear optical process of second harmonic generation (SHG) that will be hypothesized to be present during lithium ion insertion into silicon nanowires. First it will be determined whether the medium in which SHG is conveyed is non-centrosymmetric or whether the medium is inversion symmetric where SHG as a part of the second-order nonlinear optical phenomenon does not exist. It will be demonstrated that the main interaction that determines SHG is multiphoton absorption on lithium ions. The quantum harmonic oscillator (QHO) is used as the background that generates coherent states for electrons and photons that transverse the length of the silicon nanowire. The matrix elements of the Hamiltonian which represents the energy of the system will be used to calculate the probability density of second-order nonlinear optical interactions which includes collectively SHG, sum-frequency generation (SFG) and difference-frequency generation (DFG). As a result it will be seen that at varies concentrations of lithium ions (Li+) within the crystallized silicon (c-Si) matrix the second-order nonlinear optical process has probabilities substantial enough to create second harmonic generation that could possibly be used for such applications as second harmonic imaging microscopy.
△ Less
Submitted 17 October, 2021; v1 submitted 27 September, 2021;
originally announced September 2021.
-
A Photonic Integrated Circuit based Compressive Sensing Radio Frequency Receiver
Authors:
David B. Borlaug,
Steven Estrella,
Carl T. Boone,
George Sefler,
Thomas Justin Shaw,
Angsuman Roy,
Leif Johansson,
George C. Valley
Abstract:
A photonic integrated circuit comprised of an 11 cm multimode speckle waveguide, a 1x32 splitter, and a linear grating coupler array is fabricated and utilized to receive 2 GHz of RF signal bandwidth from 2.5 to 4.5 GHz using a 35 MHz mode locked laser.
A photonic integrated circuit comprised of an 11 cm multimode speckle waveguide, a 1x32 splitter, and a linear grating coupler array is fabricated and utilized to receive 2 GHz of RF signal bandwidth from 2.5 to 4.5 GHz using a 35 MHz mode locked laser.
△ Less
Submitted 21 October, 2020;
originally announced December 2020.
-
A Photonic Integrated Circuit based Compressive Sensing Radio Frequency Receiver Using Waveguide Speckle
Authors:
David B. Borlaug,
Steven Estrella,
Carl Boone,
George A. Sefler,
Thomas Justin Shaw,
Angsuman Roy,
Leif Johansson,
George C. Valley
Abstract:
A photonic integrated circuit (PIC) comprised of an 11 cm multimode speckle waveguide, a 1x32 splitter, and a linear grating coupler array is fabricated and utilized to receive 2 GHz of radio-frequency (RF) signal bandwidth from 2.5 to 4.5 GHz using compressive sensing (CS). Incoming RF signals are modulated onto chirped optical pulses which are input to the multimode waveguide. The multimode wave…
▽ More
A photonic integrated circuit (PIC) comprised of an 11 cm multimode speckle waveguide, a 1x32 splitter, and a linear grating coupler array is fabricated and utilized to receive 2 GHz of radio-frequency (RF) signal bandwidth from 2.5 to 4.5 GHz using compressive sensing (CS). Incoming RF signals are modulated onto chirped optical pulses which are input to the multimode waveguide. The multimode waveguide produces the random projections needed for CS via optical speckle. The time-varying phase and amplitude of two test RF signals between 2.5 and 4.5 GHz are successfully recovered using the standard penalized $l_1$-norm method. The use of a passive PIC serves as an initial step towards the miniaturization of a compressive sensing RF receiver.
△ Less
Submitted 21 July, 2020;
originally announced August 2020.
-
DLTPy: Deep Learning Type Inference of Python Function Signatures using Natural Language Context
Authors:
Casper Boone,
Niels de Bruin,
Arjan Langerak,
Fabian Stelmach
Abstract:
Due to the rise of machine learning, Python is an increasingly popular programming language. Python, however, is dynamically typed. Dynamic ty** has shown to have drawbacks when a project grows, while at the same time it improves developer productivity. To have the benefits of static ty**, combined with high developer productivity, types need to be inferred. In this paper, we present DLTPy: a…
▽ More
Due to the rise of machine learning, Python is an increasingly popular programming language. Python, however, is dynamically typed. Dynamic ty** has shown to have drawbacks when a project grows, while at the same time it improves developer productivity. To have the benefits of static ty**, combined with high developer productivity, types need to be inferred. In this paper, we present DLTPy: a deep learning type inference solution for the prediction of types in function signatures based on the natural language context (identifier names, comments and return expressions) of a function. We found that DLTPy is effective and has a top-3 F1-score of 91.6%. This means that in most of the cases the correct type is within the top-3 predictions. We conclude that natural language contained in comments and return expressions are beneficial to predicting types more accurately. DLTPy does not significantly outperform or underperform the previous work NL2Type for Javascript, but does show that similar prediction is possible for Python.
△ Less
Submitted 2 December, 2019;
originally announced December 2019.
-
Isotopic profiles imply strong convective influence on water near the tropical tropopause
Authors:
Maximilien Bolot,
Bernard Legras,
Kaley A. Walker,
Christopher D. Boone,
Peter Bernath,
William G. Read,
Elisabeth J. Moyer
Abstract:
The influence of deep convection on water vapor in the Tropical Tropopause Layer (TTL), the region just below the high ($\sim$18 km), cold tropical tropopause, remains an outstanding question in atmospheric science. Moisture transport to this region is important for climate projections because it drives the formation of local cirrus (ice) clouds, which have a disproportionate impact on the Earth's…
▽ More
The influence of deep convection on water vapor in the Tropical Tropopause Layer (TTL), the region just below the high ($\sim$18 km), cold tropical tropopause, remains an outstanding question in atmospheric science. Moisture transport to this region is important for climate projections because it drives the formation of local cirrus (ice) clouds, which have a disproportionate impact on the Earth's radiative balance. Deep cumulus towers carrying large volumes of ice are known to reach the TTL, but their importance to the water budget has been debated for several decades. We show here that profiles of the isotopic composition of water vapor can provide a quantitative estimate of the convective contribution to TTL moistening. Isotopic measurements from the ACE satellite instrument, in conjunction with ice loads inferred from CALIOP satellite measurements and simple mass-balance modeling, suggest that convection is the dominant source of water vapor in the TTL up to near-tropopause altitudes. The relatively large ice loads inferred from CALIOP satellite measurements can be produced only with significant water sources, and isotopic profiles imply that these sources are predominantly convective ice. Sublimating ice from deep convection appears to increase TTL cirrus by a factor of several over that expected if cirrus production were driven only by large-scale uplift; sensitivity analysis implies that these conclusions are robust for most physically reasonable assumptions. Changes in tropical deep convection in future warmer conditions may thus provide an important climate feedback.
△ Less
Submitted 6 December, 2016;
originally announced December 2016.
-
Nanomechanical detection of the spin Hall effect
Authors:
Joseph A. Boales,
Carl T. Boone,
Pritiraj Mohanty
Abstract:
The spin Hall effect creates a spin current in response to a charge current in a material that has strong spin-orbit coupling. The size of the spin Hall effect in many materials is disputed, requiring independent measurements of the effect. We develop a novel mechanical method to measure the size of the spin Hall effect, relying on the equivalence between spin and angular momentum. The spin curren…
▽ More
The spin Hall effect creates a spin current in response to a charge current in a material that has strong spin-orbit coupling. The size of the spin Hall effect in many materials is disputed, requiring independent measurements of the effect. We develop a novel mechanical method to measure the size of the spin Hall effect, relying on the equivalence between spin and angular momentum. The spin current carries angular momentum, so the flow of angular momentum will result in a mechanical torque on the material. We determine the size and geometry of this torque and demonstrate that it can be measured using a nanomechanical device. Our results show that measurement of the spin Hall effect in this manner is possible and also opens possibilities for actuating nanomechanical systems with spin currents.
△ Less
Submitted 9 May, 2016; v1 submitted 3 September, 2015;
originally announced September 2015.
-
Comparison of spin-orbit torques and spin pum** across NiFe/Pt and NiFe/Cu/Pt interfaces
Authors:
Tianxiang Nan,
Satoru Emori,
Carl T. Boone,
Xinjun Wang,
Trevor M. Oxholm,
John G. Jones,
Brandon M. Howe,
Gail J. Brown,
Nian X. Sun
Abstract:
We experimentally investigate spin-orbit torques and spin pum** in NiFe/Pt bilayers with direct and interrupted interfaces. The dam**-like and field-like torques are simultaneously measured with spin-torque ferromagnetic resonance tuned by a dc bias current, whereas spin pum** is measured electrically through the inverse spin Hall effect using a microwave cavity. Insertion of an atomically t…
▽ More
We experimentally investigate spin-orbit torques and spin pum** in NiFe/Pt bilayers with direct and interrupted interfaces. The dam**-like and field-like torques are simultaneously measured with spin-torque ferromagnetic resonance tuned by a dc bias current, whereas spin pum** is measured electrically through the inverse spin Hall effect using a microwave cavity. Insertion of an atomically thin Cu dusting layer at the interface reduces the dam**-like torque, field-like torque, and spin pum** by nearly the same factor of ~1.4. This finding confirms that the observed spin-orbit torques predominantly arise from diffusive transport of spin current generated by the spin Hall effect. We also find that spin-current scattering at the NiFe/Pt interface contributes to additional enhancement in magnetization dam** that is distinct from spin pum**.
△ Less
Submitted 12 February, 2016; v1 submitted 13 March, 2015;
originally announced March 2015.
-
Quantification of the spin-Hall anti-dam** torque with a resonance spectrometer
Authors:
Satoru Emori,
Tianxiang Nan,
Trevor M. Oxholm,
Carl T. Boone,
John G. Jones,
Brandon M. Howe,
Gail J. Brown,
David E. Budil,
Nian X. Sun
Abstract:
We present a simple technique using a cavity-based resonance spectrometer to quantify the anti-dam** torque due to the spin Hall effect. Modification of ferromagnetic resonance is observed as a function of small DC current in sub-mm-wide strips of bilayers, consisting of magnetically soft FeGaB and strong spin-Hall metal Ta. From the detected current-induced linewidth change, we obtain an effect…
▽ More
We present a simple technique using a cavity-based resonance spectrometer to quantify the anti-dam** torque due to the spin Hall effect. Modification of ferromagnetic resonance is observed as a function of small DC current in sub-mm-wide strips of bilayers, consisting of magnetically soft FeGaB and strong spin-Hall metal Ta. From the detected current-induced linewidth change, we obtain an effective spin Hall angle of 0.08-0.09 independent of the magnetic layer thickness. Our results demonstrate that a sensitive resonance spectrometer can be a general tool to investigate spin Hall effects in various material systems, even those with vanishingly low conductivity and magnetoresistance.
△ Less
Submitted 22 November, 2014;
originally announced November 2014.
-
Recommended isolated-line profile for representing high-resolution spectroscopic transitions (IUPAC Technical Report)
Authors:
Jonathan Tennyson,
Peter F. Bernath,
Alain Campargue,
Attila G. Csaszar,
Ludovic Daumont,
Robert R. Gamache,
Joseph T. Hodges,
Daniel Lisak,
Olga V. Naumenko,
Laurence S. Rothman,
Ha Tran,
Nikolai F. Zobov,
Jeanna Buldyreva,
Chris D. Boone,
Maria Domenica De Vizia,
Livio Gianfrani,
Jean-Michel Hartmann,
Robert McPheat,
Jonathan Murray,
Ngoc Hoa Ngo,
Oleg L. Polyansky,
Damien Weidmann
Abstract:
The report of an IUPAC Task Group, formed in 2011 on "Intensities and line shapes in high-resolution spectra of water isotopologues from experiment and theory" (Project No. 2011-022-2-100), on line profiles of isolated high-resolution rotational-vibrational transitions perturbed by neutral gas-phase molecules is presented. The well-documented inadequacies of the Voigt profile (VP), used almost uni…
▽ More
The report of an IUPAC Task Group, formed in 2011 on "Intensities and line shapes in high-resolution spectra of water isotopologues from experiment and theory" (Project No. 2011-022-2-100), on line profiles of isolated high-resolution rotational-vibrational transitions perturbed by neutral gas-phase molecules is presented. The well-documented inadequacies of the Voigt profile (VP), used almost universally by databases and radiative-transfer codes, to represent pressure effects and Doppler broadening in isolated vibrational-rotational and pure rotational transitions of the water molecule have resulted in the development of a variety of alternative line-profile models. These models capture more of the physics of the influence of pressure on line shapes but, in general, at the price of greater complexity. The Task Group recommends that the partially Correlated quadratic-Speed-Dependent Hard-Collision profile should be adopted as the appropriate model for high-resolution spectroscopy. For simplicity this should be called the Hartmann--Tran profile (HTP). The HTP is sophisticated enough to capture the various collisional contributions to the isolated line shape, can be computed in a straightforward and rapid manner, and reduces to simpler profiles, including the Voigt profile, under certain simplifying assumptions.
△ Less
Submitted 10 October, 2014; v1 submitted 27 September, 2014;
originally announced September 2014.
-
Spin-Scattering Rates in Metallic Thin Films Measured by Ferromagnetic Resonance Dam** Enhanced by Spin-Pum**
Authors:
C. T. Boone,
J. M. Shaw,
H. T. Nembach,
T. J. Silva
Abstract:
We determined the spin-transport properties of Pd and Pt thin films by measuring the increase in ferromagnetic resonance dam** due to spin-pum** in ferromagnetic (FM)-nonferromagnetic metal (NM) multilayers with varying NM thicknesses. The increase in dam** with NM thickness depends strongly on both the spin- and charge-transport properties of the NM, as modeled by diffusion equations that i…
▽ More
We determined the spin-transport properties of Pd and Pt thin films by measuring the increase in ferromagnetic resonance dam** due to spin-pum** in ferromagnetic (FM)-nonferromagnetic metal (NM) multilayers with varying NM thicknesses. The increase in dam** with NM thickness depends strongly on both the spin- and charge-transport properties of the NM, as modeled by diffusion equations that include both momentum- and spin-scattering parameters. We use the analytical solution to the spin-diffusion equations to obtain spin-diffusion lengths for Pt and Pd. By measuring the dependence of conductivity on NM thickness, we correlate the charge- and spin-transport parameters, and validate the applicability of various models for momentum-scattering and spin-scattering rates in these systems: constant, inverse-proportional (Dyakanov-Perel), and linear-proportional (Elliot-Yafet). We confirm previous reports that the spin-scattering time can be shorter than the momentum scattering time in Pt, and the Dyakanov-Perel-like model is the best fit to the data.
△ Less
Submitted 16 June, 2015; v1 submitted 25 August, 2014;
originally announced August 2014.
-
TAPAS, a web-based service of atmospheric transmission computation for astronomy
Authors:
J. L. Bertaux,
R. Lallement,
S. Ferron,
C. Boone,
R. Bodichon
Abstract:
Spectra of astronomical targets acquired from ground-based instruments are affected by the atmospheric transmission. The authors and their institutes are develo** a web-based service, TAPAS (Transmissions of the AtmosPhere for AStromomical data). This service, freely available, is developed and maintained within the atmospheric ETHER data center. TAPAS computes the atmospheric transmission in th…
▽ More
Spectra of astronomical targets acquired from ground-based instruments are affected by the atmospheric transmission. The authors and their institutes are develo** a web-based service, TAPAS (Transmissions of the AtmosPhere for AStromomical data). This service, freely available, is developed and maintained within the atmospheric ETHER data center. TAPAS computes the atmospheric transmission in the line-of-sight to the target indicated by the user. The user files a request indicating the time, ground location, and either the equatorial coordinates of the target or the Zenith Angle of the line-of sight (LOS). The actual atmospheric profile (temperature, pressure, humidity, ozone content) at that time and place is retrieved from the ETHER atmospheric data base (from a combination of ECMWF meteorological field and other informations), and the atmospheric transmission is computed from LBLRTM software and HITRAN data base for a number of gases: O2, H2O, O3, CO2, and Rayleigh extinction. The first purpose of TAPAS output is to allow identification of observed spectral features as being from atmospheric or astrophysical origin. The returned transmission may also serve for characterizing the spectrometer in wavelength scale and Instrument Line Spectral Function (ILSF) by comparing one observed spectrum of an atmospheric feature to the transmission. Finally, the TOA (Top Of Atmosphere) spectrum may be obtained either by division of the observed spectrum by the computed transmission or other techniques developed on purpose. The obtention of transmissions for individual species allows more potentialities and better adjustments to the data. In this paper, we describe briefly the mechanism of computation of the atmospheric transmissions, and we show some results for O2 and H2O atmospheric absorption. The wavelength range is presently 500-2500 nm. The address is http://ether.ipsl.jussieu.fr/tapas/
△ Less
Submitted 17 November, 2013;
originally announced November 2013.
-
Precise determination of the spectroscopic g-factor using broadband ferromagnetic resonance spectroscopy
Authors:
Justin M. Shaw,
Hans T. Nembach,
T. J. Silva,
Carl T. Boone
Abstract:
We demonstrate that the spectroscopic g-factor can be determined with high precision and accuracy by broadband ferromagnetic resonance measurements and applying an asymptotic analysis to the data. Spectroscopic data used to determine the g-factor is always obtained over a finite range of frequencies, which can result in significant errors in the fitted values of the spectroscopic g-factor. We show…
▽ More
We demonstrate that the spectroscopic g-factor can be determined with high precision and accuracy by broadband ferromagnetic resonance measurements and applying an asymptotic analysis to the data. Spectroscopic data used to determine the g-factor is always obtained over a finite range of frequencies, which can result in significant errors in the fitted values of the spectroscopic g-factor. We show that by applying an asymptotic analysis to broadband datasets, precise values of the intrinsic g-factor can be determined with errors well below 1 %, even when the exact form of the Kittel equation (which describes the relationship between the frequency and resonance field) is unknown. We demonstrate this methodology with measured data obtained for sputtered Ni80Fe20 ("Permalloy") thin films of varied thicknesses, where we determine the bulk g-factor value to be 2.109 +/- 0.003. Such an approach is further validated by application to simulated data that includes both noise and an anisotropy that is not included in the Kittel equation that was used in the analysis. Finally, we show a correlation of thickness and interface structure to the magnitude of the asymptotic behavior, which provide insight into additional mechanisms that may induce deviations from the Kittel equation.
△ Less
Submitted 28 October, 2013;
originally announced October 2013.
-
Spin transport parameters in metallic multilayers determined by ferromagnetic resonance measurements of spin pum**
Authors:
C. T. Boone,
H. T. Nembach,
J. M. Shaw,
T. J. Silva
Abstract:
We measured spin transport in nonferromagnetic (NM) metallic multilayers from the contribution to dam** due to spin pum** from a ferromagnetic Co90Fe10 thin film. The multilayer stack consisted of NM1/NM2/Co90Fe10(2 nm)/NM2/NM3 with varying NM materials and thicknesses. Using conventional theory for one dimensional diffusive spin transport in metals, we show that the effective dam** due to s…
▽ More
We measured spin transport in nonferromagnetic (NM) metallic multilayers from the contribution to dam** due to spin pum** from a ferromagnetic Co90Fe10 thin film. The multilayer stack consisted of NM1/NM2/Co90Fe10(2 nm)/NM2/NM3 with varying NM materials and thicknesses. Using conventional theory for one dimensional diffusive spin transport in metals, we show that the effective dam** due to spin pum** can be strongly affected by the spin transport properties of each NM in the multilayer, which permits the use of dam** measurements to accurately determine the spin transport properties of the various NM layers in the full five-layer stack. We find that due to its high electrical resistivity, amorphous Ta is a poor spin conductor, in spite of a short spin-diffusion length of 1.0 nm, and that Pt is an excellent spin conductor by virtue of its low electrical resistivity and a spin diffusion length of only 0.5 nm. Spin Hall effect measurements may have underestimated the spin Hall angle in Pt by assuming a much longer spin diffusion length.
△ Less
Submitted 24 January, 2013;
originally announced January 2013.
-
Mode- and size-dependent Landau-Lifshitz dam** in magnetic nanostructures: Evidence for non-local dam**
Authors:
Hans T. Nembach,
Justin M. Shaw,
Carl T. Boone,
T. J. Silva
Abstract:
We demonstrate a strong dependence of the effective dam** on the nanomagnet size and the particular spin-wave mode that can be explained by the theory of intralayer transverse-spin-pum**. The effective Landau-Lifshitz dam** is measured optically in individual, isolated nanomagnets as small as 100 nm. The measurements are accomplished by use of a novel heterodyne magneto-optical microwave mic…
▽ More
We demonstrate a strong dependence of the effective dam** on the nanomagnet size and the particular spin-wave mode that can be explained by the theory of intralayer transverse-spin-pum**. The effective Landau-Lifshitz dam** is measured optically in individual, isolated nanomagnets as small as 100 nm. The measurements are accomplished by use of a novel heterodyne magneto-optical microwave microscope with unprecedented sensitivity. Experimental data reveal multiple standing spin-wave modes that we identify by use of micromagnetic modeling as having either localized or delocalized character, described generically as end- and center-modes. The dam** parameter of the two modes depends on both the size of the nanomagnet as well as the particular spin-wave mode that is excited, with values that are enhanced by as much as 40% relative to that measured for an extended film. Contrary to expectations based on the ad hoc consideration of lithography-induced edge damage, the dam** for the end-mode decreases as the size of the nanomagnet decreases. The data agree with the theory for dam** caused by the flow of intralayer transverse spin-currents driven by the magnetization curvature. These results have serious implications for the performance of nanoscale spintronic devices such as spin-torque-transfer magnetic random access memory.
△ Less
Submitted 14 March, 2013; v1 submitted 30 October, 2012;
originally announced October 2012.
-
Stochastic resonance of a nanomagnet excited by spin transfer torque
Authors:
Xiao Cheng,
Carl T. Boone,
Jian Zhu,
I. N. Krivorotov
Abstract:
Spin transfer torque from spin-polarized electrical current can excite large-amplitude magnetization dynamics in metallic ferromagnets of nanoscale dimensions. Since magnetic anisotropy energies of nanomagnets are comparable to the thermal energy scale, temperature can have a profound effect on the dynamics of a nanomagnet driven by spin transfer torque. Here we report the observation of unusual…
▽ More
Spin transfer torque from spin-polarized electrical current can excite large-amplitude magnetization dynamics in metallic ferromagnets of nanoscale dimensions. Since magnetic anisotropy energies of nanomagnets are comparable to the thermal energy scale, temperature can have a profound effect on the dynamics of a nanomagnet driven by spin transfer torque. Here we report the observation of unusual types of microwave-frequency nonlinear magnetization dynamics co-excited by alternating spin transfer torque and thermal fluctuations. In these dynamics, temperature amplifies the amplitude of GHz-range precession of magnetization and enables excitation of highly nonlinear dynamical states of magnetization by weak alternating spin transfer torque. We explain these thermally activated dynamics in terms of non-adiabatic stochastic resonance of magnetization driven by spin transfer torque. This type of magnetic stochastic resonance may find use in sensitive nanometer-scale microwave signal detectors.
△ Less
Submitted 18 December, 2009;
originally announced December 2009.
-
Magnetic Domain Wall Pum** by Spin Transfer Torque
Authors:
Carl T. Boone,
Ilya N. Krivorotov
Abstract:
We show that spin transfer torque from direct spin-polarized current applied parallel to a magnetic domain wall (DW) induces DW motion in a direction independent of the current polarity. This unidirectional response of the DW to spin torque enables DW pum**: long-range DW displacement driven by alternating current. Our numerical simulations reveal that DW pum** can be resonantly amplified th…
▽ More
We show that spin transfer torque from direct spin-polarized current applied parallel to a magnetic domain wall (DW) induces DW motion in a direction independent of the current polarity. This unidirectional response of the DW to spin torque enables DW pum**: long-range DW displacement driven by alternating current. Our numerical simulations reveal that DW pum** can be resonantly amplified through excitation of internal degrees of freedom of the DW by the current.
△ Less
Submitted 18 December, 2009;
originally announced December 2009.
-
Rapid Domain Wall Motion in Permalloy Nanowires Excited by Spin-Polarized Current Applied Perpendicular to the Nanowire
Authors:
C. T. Boone,
J. A. Katine,
M. Carey,
J. R. Childress,
X. Cheng,
I. N. Krivorotov
Abstract:
We study domain wall (DW) dynamics in permalloy nanowires excited by alternating spin-polarized current applied perpendicular to the nanowire. Spin torque ferromagnetic resonance measurements reveal that DW oscillations at a pinning site in the nanowire can be excited with velocities as high as 800 m/s at current densities below 10$^7$ A/cm$^2$.
We study domain wall (DW) dynamics in permalloy nanowires excited by alternating spin-polarized current applied perpendicular to the nanowire. Spin torque ferromagnetic resonance measurements reveal that DW oscillations at a pinning site in the nanowire can be excited with velocities as high as 800 m/s at current densities below 10$^7$ A/cm$^2$.
△ Less
Submitted 3 March, 2010; v1 submitted 9 September, 2009;
originally announced September 2009.
-
Resonant Nonlinear Dam** of Quantized Spin Waves in Ferromagnetic Nanowires
Authors:
Carl Boone,
Jordan Katine,
Jeff Childress,
Vasil Tiberkevich,
Andrei Slavin,
Jian Zhu,
Xiao Cheng,
Ilya Krivorotov
Abstract:
We use spin torque ferromagnetic resonance to measure the spectral properties of dipole-exchange spin waves in permalloy nanowires. Our measurements reveal that geometric confinement has a profound effect on the dam** of spin waves in the nanowire geometry. The dam** parameter of the lowest-energy quantized spin wave mode depends on applied magnetic field in a resonant way and exhibits a max…
▽ More
We use spin torque ferromagnetic resonance to measure the spectral properties of dipole-exchange spin waves in permalloy nanowires. Our measurements reveal that geometric confinement has a profound effect on the dam** of spin waves in the nanowire geometry. The dam** parameter of the lowest-energy quantized spin wave mode depends on applied magnetic field in a resonant way and exhibits a maximum at a field that increases with decreasing nanowire width. This enhancement of dam** originates from a nonlinear resonant three-magnon confluence process allowed at a particular bias field value determined by quantization of the spin wave spectrum in the nanowire geometry.
△ Less
Submitted 15 October, 2009; v1 submitted 28 May, 2009;
originally announced May 2009.
-
Origin of the Inverse Spin Switch Effect in Superconducting Spin Valves
Authors:
J. Zhu,
X. Cheng,
C. Boone,
I. N. Krivorotov
Abstract:
The resistance of a ferromagnet/superconductor/ferromagnet (F/S/F) spin valve near its superconducting transition temperature, $T_c$, depends on the state of magnetization of the F layers. This phenomenon, known as spin switch effect (SSE), manifests itself as a resistance difference between parallel ($R_P$) and antiparallel ($R_{AP}$) configurations of the F layers. Both standard (…
▽ More
The resistance of a ferromagnet/superconductor/ferromagnet (F/S/F) spin valve near its superconducting transition temperature, $T_c$, depends on the state of magnetization of the F layers. This phenomenon, known as spin switch effect (SSE), manifests itself as a resistance difference between parallel ($R_P$) and antiparallel ($R_{AP}$) configurations of the F layers. Both standard ($R_{P}>R_{AP}$) and inverse ($R_{P}<R_{AP}$) SSE have been observed in different superconducting spin valve systems, but the origin of the inverse SSE was not understood. Here we report observation of a coexistence of the standard and inverse SSE in Ni$_{81}$Fe$_{19}$/Nb/Ni$_{81}$Fe$_{19}$/Ir$_{25}$Mn$_{75}$ spin valves. Our measurements reveal that the inverse SSE arises from a dissipative flow of vortices induced by stray magnetic fields from magnetostatically coupled Néel domain wall pairs in the F layers.
△ Less
Submitted 28 February, 2009;
originally announced March 2009.
-
Experimental Test of Analytic Theory of Spin Torque Oscillator Dynamics
Authors:
C. Boone,
J. A. Katine,
J. R. Childress,
J. Zhu,
X. Cheng,
I. N. Krivorotov
Abstract:
We make measurements of power spectral density of the microwave voltage emitted by a spin torque nano-oscillator (STNO) and compare our experimental results to predictions of an analytic theory of a single-mode STNO dynamics by V. S. Tiberkevich, A. N. Slavin, J. V. Kim,[Phys. Rev. B 78, 092401 (2008)]. We find that a complete set of the oscillator spectral properties: power, frequency, spectral…
▽ More
We make measurements of power spectral density of the microwave voltage emitted by a spin torque nano-oscillator (STNO) and compare our experimental results to predictions of an analytic theory of a single-mode STNO dynamics by V. S. Tiberkevich, A. N. Slavin, J. V. Kim,[Phys. Rev. B 78, 092401 (2008)]. We find that a complete set of the oscillator spectral properties: power, frequency, spectral line width and line shape as functions of current are self-consistently described by the analytic theory for moderate amplitudes of oscillations (< 70 degrees).
△ Less
Submitted 2 December, 2008; v1 submitted 2 December, 2008;
originally announced December 2008.
