Showing 1–41 of 41 results for author: Bonvin, V

VELOcities of CEpheids (VELOCE) I. High-precision radial velocities of Cepheids

Authors: Richard I. Anderson, Giordano Viviani, Shreeya S. Shetye, Nami Mowlavi, Laurent Eyer, Lovro Palaversa, Berry Holl, Sergi Blanco-Cuaresma, Kateryna Kravchenko, Michał Pawlak, Mauricio Cruz Reyes, Saniya Khan, Henryka E. Netzel, Lisa Löbling, Péter I. Pápics, Andreas Postel, Maroussia Roelens, Zoi T. Spetsieri, Anne Thoul, Jiří Zák, Vivien Bonvin, David V. Martin, Martin Millon, Sophie Saesen, Aurélien Wyttenbach , et al. (5 additional authors not shown)

Abstract: This first VELOCE data release comprises 18,225 high-precision RV measurements of 258 bona fide classical Cepheids on both hemispheres collected mainly between 2010 and 2022, alongside 1161 additional observations of 164 other stars. The median per-observation RV uncertainty is 0.037 km/s, and some reach 0.002 km/s. Non-variable standard stars characterize RV zero-point stability and provide a bas… ▽ More This first VELOCE data release comprises 18,225 high-precision RV measurements of 258 bona fide classical Cepheids on both hemispheres collected mainly between 2010 and 2022, alongside 1161 additional observations of 164 other stars. The median per-observation RV uncertainty is 0.037 km/s, and some reach 0.002 km/s. Non-variable standard stars characterize RV zero-point stability and provide a base for future cross-calibrations. We determined zero-point differences between VELOCE and 31 literature data sets using template fitting and measured linear period changes of 146 Cepheids. Seventy six spectroscopic binary Cepheids and 14 candidates are identified using VELOCE data alone and are investigated in detail in a companion paper (VELOCE II). Several new insights into Cepheid pulsations were obtained, including: a) the most detailed description of the Hertzsprung progression by RVs; b) the identification of double-peaked bumps in the RV curve; c) clear evidence that virtually all Cepheids feature spectroscopic variability signals that lead to modulated RV variability. We identified 36 such stars, of which 4 also exhibit orbital motion. Linear radius variations depend strongly on pulsation period and a steep increase in slope of the $Δ$R/p versus logP-relation is found near 10d, challenging the existence of a tight relation between Baade-Wesselink projection factors and pulsation periods. We investigated the accuracy of RV time series measurements, v$_γ$, and RV amplitudes published in Gaia's DR3 and determined an average offset of 0.65 \pm 0.11 km/s relative to VELOCE. We recommend adopting a single set of template correlation parameters for distinct classes of large-amplitude variable stars to avoid systematic offsets in v$_γ$ among stars belonging to the same class. Peak-to-peak amplitudes of Gaia RVs exhibit significant (16%) dispersion compared to VELOCE. [abridged] △ Less

Submitted 25 April, 2024; v1 submitted 18 April, 2024; originally announced April 2024.

Comments: A&A in press, 46 pages, 35 figures, 20 tables. Some data only available via the CDS at publication. VELOCE DR1 data will be made public in FITS format via zenodo.org at DOI: 10.5281/zenodo.10793507 upon publication of the paper in A&A

Journal ref: A&A 686, A177 (2024)

The Magnificent Five Images of Supernova Refsdal: Time Delay and Magnification Measurements

Authors: Patrick L. Kelly, Steven Rodney, Tommaso Treu, Simon Birrer, Vivien Bonvin, Luc Dessart, Ryan J. Foley, Alexei V. Filippenko, Daniel Gilman, Saurabh Jha, Jens Hjorth, Kaisey Mandel, Martin Millon, Justin Pierel, Stephen Thorp, Adi Zitrin, Tom Broadhurst, Wenlei Chen, Jose M. Diego, Alan Dressler, Or Graur, Mathilde Jauzac, Matthew A. Malkan, Curtis McCully, Masamune Oguri , et al. (6 additional authors not shown)

Abstract: In late 2014, four images of Supernova (SN) "Refsdal," the first known example of a strongly lensed SN with multiple resolved images, were detected in the MACS J1149 galaxy-cluster field. Following the images' discovery, the SN was predicted to reappear within hundreds of days at a new position ~8 arcseconds away in the field. The observed reappearance in late 2015 makes it possible to carry out R… ▽ More In late 2014, four images of Supernova (SN) "Refsdal," the first known example of a strongly lensed SN with multiple resolved images, were detected in the MACS J1149 galaxy-cluster field. Following the images' discovery, the SN was predicted to reappear within hundreds of days at a new position ~8 arcseconds away in the field. The observed reappearance in late 2015 makes it possible to carry out Refsdal's (1964) original proposal to use a multiply imaged SN to measure the Hubble constant H0, since the time delay between appearances should vary inversely with H0. Moreover, the position, brightness, and timing of the reappearance enable a novel test of the blind predictions of galaxy-cluster models, which are typically constrained only by the positions of multiply imaged galaxies. We have developed a new photometry pipeline that uses DOLPHOT to measure the fluxes of the five images of SN Refsdal from difference images. We apply four separate techniques to perform a blind measurement of the relative time delays and magnification ratios (mu_i/mu_1) between the last image SX and the earlier images S1-S4. We measure the relative time delay of SX-S1 to be 376.0+5.6-5.5 days and the relative magnification to be 0.30+0.05-0.03. This corresponds to a 1.5% precision on the time delay and 17% precision for the magnification ratios, and includes uncertainties due to millilensing and microlensing. In an accompanying paper, we place initial and blind constraints on the value of the Hubble constant. △ Less

Submitted 10 May, 2023; originally announced May 2023.

Comments: Published in ApJ. Companion paper presenting H0 constraints published in Science (DOI: 10.1126/science.abh1322)

Constraints on the Hubble constant from Supernova Refsdal's reappearance

Authors: Patrick L. Kelly, Steven Rodney, Tommaso Treu, Masamune Oguri, Wenlei Chen, Adi Zitrin, Simon Birrer, Vivien Bonvin, Luc Dessart, Jose M. Diego, Alexei V. Filippenko, Ryan J. Foley, Daniel Gilman, Jens Hjorth, Mathilde Jauzac, Kaisey Mandel, Martin Millon, Justin Pierel, Keren Sharon, Stephen Thorp, Liliya Williams, Tom Broadhurst, Alan Dressler, Or Graur, Saurabh Jha , et al. (5 additional authors not shown)

Abstract: The gravitationally lensed Supernova Refsdal appeared in multiple images, produced through gravitational lensing by a massive foreground galaxy cluster. After the supernova appeared in 2014, lens models of the galaxy cluster predicted an additional image of the supernova would appear in 2015, which was subsequently observed. We use the time delays between the images to perform a blinded measuremen… ▽ More The gravitationally lensed Supernova Refsdal appeared in multiple images, produced through gravitational lensing by a massive foreground galaxy cluster. After the supernova appeared in 2014, lens models of the galaxy cluster predicted an additional image of the supernova would appear in 2015, which was subsequently observed. We use the time delays between the images to perform a blinded measurement of the expansion rate of the Universe, quantified by the Hubble constant (H0). Using eight cluster lens models, we infer H0 = 64.8 +4.4-4.3 km / s / Mpc, where Mpc is the megaparsec. Using the two models most consistent with the observations, we find H0 = 66.6 +4.1-3.3 km / s / Mpc. The observations are best reproduced by models that assign dark-matter halos to individual galaxies and the overall cluster. △ Less

Submitted 2 September, 2023; v1 submitted 10 May, 2023; originally announced May 2023.

Comments: Published in Science on May 11, 2023; this version updated to reflect minor edits to galley proofs. Companion paper presenting time-delay and relative magnification measurements published in ApJ (DOI: 10.3847/1538-4357/ac4ccb)

Journal ref: Science, Volume 380, Issue 6649, article id. abh1322, May 11, 2023

Hot Exoplanet Atmospheres Resolved with Transit Spectroscopy (HEARTS) VIII. Nondetection of sodium in the atmosphere of the aligned planet KELT-10b

Authors: M. Steiner, O. Attia, D. Ehrenreich, M. Lendl, V. Bourrier, C. Lovis, J. V. Seidel, S. G. Sousa, D. Mounzer, N. Astudillo-Defru, X. Bonfils, V. Bonvin, W. Dethier, K. Heng, B. Lavie, C. Melo, G. Ottoni, F. Pepe, D. Ségransan, A. Wyttenbach

Abstract: We searched for potential atmospheric species in KELT-10b, focusing on sodium doublet lines (Na i; 589 nm) and the Balmer alpha line (H $α$; 656 nm) in the transmission spectrum. Furthermore, we measured the planet-orbital alignment with the spin of its host star. We used the Rossiter-McLaughlin Revolutions technique to analyze the local stellar lines occulted by the planet during its transit. We… ▽ More We searched for potential atmospheric species in KELT-10b, focusing on sodium doublet lines (Na i; 589 nm) and the Balmer alpha line (H $α$; 656 nm) in the transmission spectrum. Furthermore, we measured the planet-orbital alignment with the spin of its host star. We used the Rossiter-McLaughlin Revolutions technique to analyze the local stellar lines occulted by the planet during its transit. We used the standard transmission spectroscopy method to probe the planetary atmosphere, including the correction for telluric lines and the Rossiter-McLaughlin effect on the spectra. We analyzed two new light curves jointly with the public photometry observations. We do not detect signals in the Na i and H $α$ lines within the uncertainty of our measurements. We derive the 3-sigma upper limit of excess absorption due to the planetary atmosphere corresponding to equivalent height Rp to 1.8Rp (Na i) and 1.9Rp (H $α$). The analysis of the Rossiter-McLaughlin effect yields the sky-projected spin-orbit angle of the system $λ$ = -5.2 $\pm$ 3.4 and the stellar projected equatorial velocity $v_{eq} \sin{i_\star}$ = 2.58 $\pm$ 0.12 km/s. Photometry results are compatible within 1 -sigma with previous studies. We found no evidence of Na i and H $α$, within the precision of our data, in the atmosphere of KELT-10b. Our detection limits allow us to rule out the presence of neutral sodium or excited hydrogen in an esca** extended atmosphere around KELT-10b. We cannot confirm the previous detection of Na i at lower altitudes with VLT/UVES. We note, however, that the Rossiter-McLaughlin effect impacts the transmission spectrum on a smaller scale than the previous detection with UVES. Analysis of the planet-occulted stellar lines shows the sky-projected alignment of the system, which is likely truly aligned due to tidal interactions of the planet with its cool (Teff < 6250 K) host star. △ Less

Submitted 10 March, 2023; originally announced March 2023.

Comments: Accepted in A&A

Journal ref: A&A 672, A134 (2023)

Generation and Simulation of Synthetic Datasets with Copulas

Authors: Regis Houssou, Mihai-Cezar Augustin, Efstratios Rappos, Vivien Bonvin, Stephan Robert-Nicoud

Abstract: This paper proposes a new method to generate synthetic data sets based on copula models. Our goal is to produce surrogate data resembling real data in terms of marginal and joint distributions. We present a complete and reliable algorithm for generating a synthetic data set comprising numeric or categorical variables. Applying our methodology to two datasets shows better performance compared to ot… ▽ More This paper proposes a new method to generate synthetic data sets based on copula models. Our goal is to produce surrogate data resembling real data in terms of marginal and joint distributions. We present a complete and reliable algorithm for generating a synthetic data set comprising numeric or categorical variables. Applying our methodology to two datasets shows better performance compared to other methods such as SMOTE and autoencoders. △ Less

Submitted 30 March, 2022; originally announced March 2022.

Radial Autoencoders for Enhanced Anomaly Detection

Authors: Mihai-Cezar Augustin, Vivien Bonvin, Regis Houssou, Efstratios Rappos, Stephan Robert-Nicoud

Abstract: In classification problems, supervised machine-learning methods outperform traditional algorithms, thanks to the ability of neural networks to learn complex patterns. However, in two-class classification tasks like anomaly or fraud detection, unsupervised methods could do even better, because their prediction is not limited to previously learned types of anomalies. An intuitive approach of anomaly… ▽ More In classification problems, supervised machine-learning methods outperform traditional algorithms, thanks to the ability of neural networks to learn complex patterns. However, in two-class classification tasks like anomaly or fraud detection, unsupervised methods could do even better, because their prediction is not limited to previously learned types of anomalies. An intuitive approach of anomaly detection can be based on the distances from the centers of mass of the two respective classes. Autoencoders, although trained without supervision, can also detect anomalies: considering the center of mass of the normal points, reconstructions have now radii, with largest radii most likely indicating anomalous points. Of course, radii-based classification were already possible without interposing an autoencoder. In any space, radial classification can be operated, to some extent. In order to outperform it, we proceed to radial deformations of data (i.e. centric compression or expansions of axes) and autoencoder training. Any autoencoder that makes use of a data center is here baptized a centric autoencoder (cAE). A special type is the cAE trained with a uniformly compressed dataset, named the centripetal autoencoder (cpAE). The new concept is studied here in relation with a schematic artificial dataset, and the derived methods show consistent score improvements. But tested on real banking data, our radial deformation supervised algorithms alone still perform better that cAEs, as expected from most supervised methods; nonetheless, in hybrid approaches, cAEs can be combined with a radial deformation of space, improving its classification score. We expect that centric autoencoders will become irreplaceable objects in anomaly live detection based on geometry, thanks to their ability to stem naturally on geometrical algorithms and to their native capability of detecting unknown anomaly types. △ Less

Submitted 31 March, 2022; v1 submitted 29 March, 2022; originally announced March 2022.

Constraining quasar structure using high-frequency microlensing variations and continuum reverberation

Authors: E. Paic, G. Vernardos, D. Sluse, M. Millon, F. Courbin, J. H. Chan, V. Bonvin

Abstract: Gravitational microlensing is a powerful tool to probe the inner structure of strongly lensed quasars and to constrain parameters of the stellar mass function of lens galaxies. This is done by analysing microlensing light curves between the multiple images of strongly lensed quasars, under the influence of three main variable components: 1- the continuum flux of the source, 2- microlensing by star… ▽ More Gravitational microlensing is a powerful tool to probe the inner structure of strongly lensed quasars and to constrain parameters of the stellar mass function of lens galaxies. This is done by analysing microlensing light curves between the multiple images of strongly lensed quasars, under the influence of three main variable components: 1- the continuum flux of the source, 2- microlensing by stars in the lens galaxy and 3- reverberation of the continuum by the Broad Line Region (BLR). The latter, ignored by state-of-the-art microlensing techniques, can introduce high-frequency variations which we show carry information on the BLR size. We present a new method which includes all these components simultaneously and fits the power spectrum of the data in the Fourier space, rather than the observed light curve itself. In this new framework, we analyse COSMOGRAIL light curves of the two-image system QJ0158-4325 known to display high-frequency variations. Using exclusively the low frequency part of the power spectrum our constraint on the accretion disk radius agrees with the thin disk model estimate and previous work that fit the microlensing light curves in real space. However, if we also take into account the high-frequency variations, the data favour significantly smaller disk sizes than previous microlensing measurements. In this case, our results are in agreement with the thin disk model prediction only if we assume very low mean masses for the microlens population, i.e. <M> = 0.01 $M_\odot$. Eventually, including the differentially microlensed continuum reverberation by the BLR successfully explains the high frequencies without requiring such low mass microlenses. This allows us to measure, for the first time, the size of the BLR using single-band photometric monitoring, $R_{BLR}$ = $1.6^{+1.5}_{-0.8}\times 10^{17}$cm, in agreement with estimates using the BLR size-luminosity relation. △ Less

Submitted 11 October, 2021; originally announced October 2021.

Journal ref: A&A 659, A21 (2022)

HOLISMOKES -- VII. Time-delay measurement of strongly lensed Type Ia supernovae using machine learning

Authors: S. Huber, S. H. Suyu, D. Ghoshdastidar, S. Taubenberger, V. Bonvin, J. H. H. Chan, M. Kromer, U. M. Noebauer, S. A. Sim, L. Leal-Taixé

Abstract: The Hubble constant ($H_0$) is one of the fundamental parameters in cosmology, but there is a heated debate around the $>$4$σ$ tension between the local Cepheid distance ladder and the early Universe measurements. Strongly lensed Type Ia supernovae (LSNe Ia) are an independent and direct way to measure $H_0$, where a time-delay measurement between the multiple supernova (SN) images is required. In… ▽ More The Hubble constant ($H_0$) is one of the fundamental parameters in cosmology, but there is a heated debate around the $>$4$σ$ tension between the local Cepheid distance ladder and the early Universe measurements. Strongly lensed Type Ia supernovae (LSNe Ia) are an independent and direct way to measure $H_0$, where a time-delay measurement between the multiple supernova (SN) images is required. In this work, we present two machine learning approaches for measuring time delays in LSNe Ia, namely, a fully connected neural network (FCNN) and a random forest (RF). For the training of the FCNN and the RF, we simulate mock LSNe Ia from theoretical SN Ia models that include observational noise and microlensing. We test the generalizability of the machine learning models by using a final test set based on empirical LSN Ia light curves not used in the training process, and we find that only the RF provides a low enough bias to achieve precision cosmology; as such, RF is therefore preferred over our FCNN approach for applications to real systems. For the RF with single-band photometry in the $i$ band, we obtain an accuracy better than 1\% in all investigated cases for time delays longer than 15 days, assuming follow-up observations with a 5$σ$ point-source depth of 24.7, a two day cadence with a few random gaps, and a detection of the LSNe Ia 8 to 10 days before peak in the observer frame. In terms of precision, we can achieve an approximately 1.5-day uncertainty for a typical source redshift of $\sim$0.8 on the $i$ band under the same assumptions. To improve the measurement, we find that using three bands, where we train a RF for each band separately and combine them afterward, helps to reduce the uncertainty to $\sim$1.0 day. We have publicly released the microlensed spectra and light curves used in this work. △ Less

Submitted 21 December, 2021; v1 submitted 5 August, 2021; originally announced August 2021.

Comments: 25 pages, 28 figures; accepted for publication in A&A

Journal ref: A&A 658, A157 (2022)

Measuring accretion disk sizes of lensed quasars with microlensing time delay in multi-band light curves

Authors: J. H. H. Chan, K. Rojas, M. Millon, F. Courbin, V. Bonvin, G. Jauffret

Abstract: Time-delay cosmography in strongly lensed quasars offer an independent way of measuring the Hubble constant, $H_0$. However, it has been proposed that the combination of microlensing and source-size effects, also known as microlensing time delay can potentially increase the uncertainty in time-delay measurements as well as lead to a biased time delay. In this work, we first investigate how microle… ▽ More Time-delay cosmography in strongly lensed quasars offer an independent way of measuring the Hubble constant, $H_0$. However, it has been proposed that the combination of microlensing and source-size effects, also known as microlensing time delay can potentially increase the uncertainty in time-delay measurements as well as lead to a biased time delay. In this work, we first investigate how microlensing time delay changes with assumptions on the initial mass function (IMF) and find that the more massive microlenses produce the sharper distributions of microlensing time delays. We also find that the IMF has modest effect on the the magnification probability distributions. Second, we present a new method to measure the color-dependent source size in lensed quasars using the microlensing time delays inferred from multi-band light curves. In practice the relevant observable is the differential microlensing time delays between different bands. We show from simulation using the facility as Vera C. Rubin Observatory that if this differential time delay between bands can be measured with a precision of $0.1$ days in any given lensed image, the disk size can be recovered to within a factor of $2$. If four lensed images are used, our method is able to achieve an unbiased source measurement within error of the order of $20\%$, which is comparable with other techniques. △ Less

Submitted 21 October, 2020; v1 submitted 28 July, 2020; originally announced July 2020.

Comments: 11 pages, 10 figures

Journal ref: A&A 647, A115 (2021)

TDCOSMO II: 6 new time delays in lensed quasars from high-cadence monitoring at the MPIA 2.2m telescope

Authors: M. Millon, F. Courbin, V. Bonvin, E. Buckley-Geer, C. D. Fassnacht, J. Frieman, P. J. Marshall, S. H. Suyu, T. Treu, T. Anguita, V. Motta, A. Agnello, J. H. H. Chan, D. C. -Y Chao, M. Chijani, D. Gilman, K. Gilmore, C. Lemon, J. R. Lucey, A. Melo, E. Paic, K. Rojas, D. Sluse, P. R. Williams, A. Hempel , et al. (3 additional authors not shown)

Abstract: We present six new time-delay measurements obtained from $R_c$-band monitoring data acquired at the Max Planck Institute for Astrophysics (MPIA) 2.2 m telescope at La Silla observatory between October 2016 and February 2020. The lensed quasars HE 0047-1756, WG 0214-2105, DES 0407-5006, 2M 1134-2103, PSJ 1606-2333 and DES 2325-5229 were observed almost daily at high signal-to-noise ratio to obtain… ▽ More We present six new time-delay measurements obtained from $R_c$-band monitoring data acquired at the Max Planck Institute for Astrophysics (MPIA) 2.2 m telescope at La Silla observatory between October 2016 and February 2020. The lensed quasars HE 0047-1756, WG 0214-2105, DES 0407-5006, 2M 1134-2103, PSJ 1606-2333 and DES 2325-5229 were observed almost daily at high signal-to-noise ratio to obtain high-quality light curves where we can record fast and small-amplitude variations of the quasars. We measured time delays between all pairs of multiple images with only one or two seasons of monitoring with the exception of the time delays relative to image D of PSJ 1606-2333. The most precise estimate was obtained for the delay between image A and image B of DES 0407-5006, where $τ_{AB} = -128.4^{+3.5}_{-3.8}$ d (2.8% precision) including systematics due to extrinsic variability in the light curves. For HE 0047-1756, we combined our high-cadence data with measurements from decade-long light curves from previous COSMOGRAIL campaigns, and reach a precision of 0.9 d on the final measurement. The present work demonstrates the feasibility of measuring time delays in lensed quasars in only one or two seasons, provided high signal-to-noise ratio data are obtained at a cadence close to daily. △ Less

Submitted 22 October, 2020; v1 submitted 17 June, 2020; originally announced June 2020.

Comments: 14 pages, 9 figures, 4 Tables, published in A&A

Journal ref: A&A 642, A193 (2020)

Time Delay Lens Modelling Challenge

Authors: X. Ding, T. Treu, S. Birrer, G. C. -F. Chen, J. Coles, P. Denzel, M. Frigo A. Galan, P. J. Marshall, M. Millon, A. More, A. J. Shajib, D. Sluse, H. Tak, D. Xu, M. W. Auger, V. Bonvin, H. Chand, F. Courbin, G. Despali, C. D. Fassnacht, D. Gilman, S. Hilbert, S. R. Kumar, Y. -Y. Lin, J. W. Park , et al. (4 additional authors not shown)

Abstract: In recent years, breakthroughs in methods and data have enabled gravitational time delays to emerge as a very powerful tool to measure the Hubble constant $H_0$. However, published state-of-the-art analyses require of order 1 year of expert investigator time and up to a million hours of computing time per system. Furthermore, as precision improves, it is crucial to identify and mitigate systematic… ▽ More In recent years, breakthroughs in methods and data have enabled gravitational time delays to emerge as a very powerful tool to measure the Hubble constant $H_0$. However, published state-of-the-art analyses require of order 1 year of expert investigator time and up to a million hours of computing time per system. Furthermore, as precision improves, it is crucial to identify and mitigate systematic uncertainties. With this time delay lens modelling challenge we aim to assess the level of precision and accuracy of the modelling techniques that are currently fast enough to handle of order 50 lenses, via the blind analysis of simulated datasets. The results in Rung 1 and Rung 2 show that methods that use only the point source positions tend to have lower precision ($10 - 20\%$) while remaining accurate. In Rung 2, the methods that exploit the full information of the imaging and kinematic datasets can recover $H_0$ within the target accuracy ($ |A| < 2\%$) and precision ($< 6\%$ per system), even in the presence of poorly known point spread function and complex source morphology. A post-unblinding analysis of Rung 3 showed the numerical precision of the ray-traced cosmological simulations to be insufficient to test lens modelling methodology at the percent level, making the results difficult to interpret. A new challenge with improved simulations is needed to make further progress in the investigation of systematic uncertainties. For completeness, we present the Rung 3 results in an appendix, and use them to discuss various approaches to mitigating against similar subtle data generation effects in future blind challenges. △ Less

Submitted 17 February, 2021; v1 submitted 15 June, 2020; originally announced June 2020.

Comments: 23 pages, 12 figures, 6 tables, MNRAS accepted

Journal ref: MNRAS, (2021), 503, 1096

H0LiCOW XI. A weak lensing measurement of the external convergence in the field of the lensed quasar B1608+656 using HST and Subaru deep imaging

Authors: O. Tihhonova, F. Courbin, D. Harvey, S. Hilbert, A. Peel, C. E. Rusu, C. D. Fassnacht, V. Bonvin, P. J. Marshall, G. Meylan, D. Sluse, S. H. Suyu, T. Treu, K. C. Wong

Abstract: We investigate the environment and line of sight of the H0LiCOW lens B1608+656 using Subaru Suprime-Cam and the Hubble Space Telescope (HST) to perform a weak lensing analysis. We compare three different methods to reconstruct the mass map of the field, i.e. the standard Kaiser-Squires inversion coupled with inpainting and Gaussian or wavelet filtering, and $\tt{Glimpse}$ a method based on sparse… ▽ More We investigate the environment and line of sight of the H0LiCOW lens B1608+656 using Subaru Suprime-Cam and the Hubble Space Telescope (HST) to perform a weak lensing analysis. We compare three different methods to reconstruct the mass map of the field, i.e. the standard Kaiser-Squires inversion coupled with inpainting and Gaussian or wavelet filtering, and $\tt{Glimpse}$ a method based on sparse regularization of the shear field. We find no substantial difference between the 2D mass reconstructions, but we find that the ground-based data is less sensitive to small-scale structures than the space-based observations. Marginalising over the results obtained with all the reconstruction techniques applied to the two available HST filters F606W and F814W, we estimate the external convergence, $κ_{\rm ext}$ at the position of B1608+656 is $κ_{\rm ext} = 0.11^{+0.06}_{-0.04}$, where the error bars corresponds respectively to the 16th and 84th quartiles. This result is compatible with previous estimates using the number-counts technique, suggesting that B1608+656 resides in an over-dense line of sight, but with a completely different technique. Using our mass reconstructions, we also compare the convergence at the position of several groups of galaxies in the field of B1608+656 with the mass measurements using various analytical mass profiles, and find that the weak lensing results favor truncated halo models. △ Less

Submitted 25 May, 2020; originally announced May 2020.

Comments: Accepted MNRAS

HOLISMOKES -- I. Highly Optimised Lensing Investigations of Supernovae, Microlensing Objects, and Kinematics of Ellipticals and Spirals

Authors: S. H. Suyu, S. Huber, R. Cañameras, M. Kromer, S. Schuldt, S. Taubenberger, A. Yıldırım, V. Bonvin, J. H. H. Chan, F. Courbin, U. Nöbauer, S. A. Sim, D. Sluse

Abstract: We present the HOLISMOKES programme on strong gravitational lensing of supernovae as a probe of supernova (SN) physics and cosmology. We investigate the effects of microlensing on early-phase SN Ia spectra using four different SN explosion models, and find that within 10 rest-frame days after SN explosion, distortions of SN Ia spectra due to microlensing are typically negligible ($<$1% distortion… ▽ More We present the HOLISMOKES programme on strong gravitational lensing of supernovae as a probe of supernova (SN) physics and cosmology. We investigate the effects of microlensing on early-phase SN Ia spectra using four different SN explosion models, and find that within 10 rest-frame days after SN explosion, distortions of SN Ia spectra due to microlensing are typically negligible ($<$1% distortion within the 1$σ$ spread, and $\lesssim$10% distortion within the 2$σ$ spread). This shows great prospects of using lensed SNe Ia to obtain intrinsic early-phase SN spectra for deciphering SN Ia progenitors. As a demonstration of the usefulness of lensed SNe Ia for cosmology, we simulate a sample of mock lensed SN Ia systems that are expected to have accurate and precise time-delay measurements in the era of the Rubin Observatory Legacy Survey of Space and Time (LSST). Adopting realistic yet conservative uncertainties on their time-delay distances and lens angular diameter distances (of 6.6% and 5%, respectively), we find that a sample of 20 lensed SNe Ia would allow a constraint on the Hubble constant ($H_0$) with 1.3% uncertainty in the flat $Λ$CDM cosmology. We find a similar constraint on $H_0$ in an open $Λ$CDM cosmology, while the constraint degrades to $3\%$ in a flat $w$CDM cosmology. We anticipate lensed SNe to be an independent and powerful probe of SN physics and cosmology in the upcoming LSST era. △ Less

Submitted 11 November, 2020; v1 submitted 19 February, 2020; originally announced February 2020.

Comments: 15 pages, 14 figures, accepted for publication in A&A

Journal ref: A&A 644, A162 (2020)

COSMOGRAIL XIX: Time delays in 18 strongly lensed quasars from 15 years of optical monitoring

Authors: M. Millon, F. Courbin, V. Bonvin, E. Paic, G. Meylan, M. Tewes, D. Sluse, P. Magain, J. H. H. Chan, A. Galan, R. Joseph, C. Lemon, O. Tihhonova, R. I. Anderson, M. Marmier, B. Chazelas, M. Lendl, A. H. M. J. Triaud, A. Wyttenbach

Abstract: We present the results of 15 years of monitoring lensed quasars, which was conducted by the COSMOGRAIL programme at the Leonhard Euler 1.2m Swiss Telescope. The decade-long light curves of 23 lensed systems are presented for the first time. We complement our data set with other monitoring data available in the literature to measure the time delays in 18 systems, among which nine reach a relative p… ▽ More We present the results of 15 years of monitoring lensed quasars, which was conducted by the COSMOGRAIL programme at the Leonhard Euler 1.2m Swiss Telescope. The decade-long light curves of 23 lensed systems are presented for the first time. We complement our data set with other monitoring data available in the literature to measure the time delays in 18 systems, among which nine reach a relative precision better than 15% for at least one time delay. To achieve this, we developed an automated version of the curve-shifting toolbox PyCS to ensure robust estimation of the time delay in the presence of microlensing, while accounting for the errors due to the imperfect representation of microlensing. We also re-analysed the previously published time delays of RX J1131$-$1231 and HE 0435$-$1223, by adding six and two new seasons of monitoring, respectively, and confirming the previous time-delay measurements. When the time delay measurement is possible, we corrected the light curves of the lensed images from their time delay and present the difference curves to highlight the microlensing signal contained in the data. To date, this is the largest sample of decade-long lens monitoring data, which is useful to measure $H_0$ and the size of quasar accretion discs with microlensing as well as to study quasar variability. △ Less

Submitted 25 August, 2020; v1 submitted 13 February, 2020; originally announced February 2020.

Comments: Published in A&A, 31 pages, 8 figures, 3 Tables

Journal ref: A&A 640, A105 (2020)

A Microlensing Accretion Disk Size Measurement in the Lensed Quasar WFI 2026-4536

Authors: Matthew A. Cornachione, Christopher W. Morgan, Martin Millon, Misty C. Bentz, Frederic Courbin, Vivien Bonvin, Emilio E. Falco

Abstract: We use thirteen seasons of R-band photometry from the 1.2m Leonard Euler Swiss Telescope at La Silla to examine microlensing variability in the quadruply-imaged lensed quasar WFI 2026-4536. The lightcurves exhibit ${\sim}\,0.2\,\text{mag}$ of uncorrelated variability across all epochs and a prominent single feature of ${\sim}\,0.1\,\text{mag}$ within a single season. We analyze this variability to… ▽ More We use thirteen seasons of R-band photometry from the 1.2m Leonard Euler Swiss Telescope at La Silla to examine microlensing variability in the quadruply-imaged lensed quasar WFI 2026-4536. The lightcurves exhibit ${\sim}\,0.2\,\text{mag}$ of uncorrelated variability across all epochs and a prominent single feature of ${\sim}\,0.1\,\text{mag}$ within a single season. We analyze this variability to constrain the size of the quasar's accretion disk. Adopting a nominal inclination of 60$^\text{o}$, we find an accretion disk scale radius of $\log(r_s/\text{cm}) = 15.74^{+0.34}_{-0.29}$ at a rest-frame wavelength of $2043\,\unicode{xC5}$, and we estimate a black hole mass of $\log(M_{\text{BH}}/M_{\odot}) = 9.18^{+0.39}_{-0.34}$, based on the CIV line in VLT spectra. This size measurement is fully consistent with the Quasar Accretion Disk Size - Black Hole Mass relation, providing another system in which the accretion disk is larger than predicted by thin disk theory. △ Less

Submitted 2 January, 2020; v1 submitted 14 November, 2019; originally announced November 2019.

Comments: 26 pages, 8 figures, Appendix with data table, pg 12-25

STRIDES: a 3.9 per cent measurement of the Hubble constant from the strong lens system DES J0408-5354

Authors: A. J. Shajib, S. Birrer, T. Treu, A. Agnello, E. J. Buckley-Geer, J. H. H. Chan, L. Christensen, C. Lemon, H. Lin, M. Millon, J. Poh, C. E. Rusu, D. Sluse, C. Spiniello, G. C. -F. Chen, T. Collett, F. Courbin, C. D. Fassnacht, J. Frieman, A. Galan, D. Gilman, A. More, T. Anguita, M. W. Auger, V. Bonvin , et al. (66 additional authors not shown)

Abstract: We present a blind time-delay cosmographic analysis for the lens system DES J0408$-$5354. This system is extraordinary for the presence of two sets of multiple images at different redshifts, which provide the opportunity to obtain more information at the cost of increased modelling complexity with respect to previously analyzed systems. We perform detailed modelling of the mass distribution for th… ▽ More We present a blind time-delay cosmographic analysis for the lens system DES J0408$-$5354. This system is extraordinary for the presence of two sets of multiple images at different redshifts, which provide the opportunity to obtain more information at the cost of increased modelling complexity with respect to previously analyzed systems. We perform detailed modelling of the mass distribution for this lens system using three band Hubble Space Telescope imaging. We combine the measured time delays, line-of-sight central velocity dispersion of the deflector, and statistically constrained external convergence with our lens models to estimate two cosmological distances. We measure the "effective" time-delay distance corresponding to the redshifts of the deflector and the lensed quasar $D_{Δt}^{\rm eff}=3382^{+146}_{-115}$ Mpc and the angular diameter distance to the deflector $D_{\rm d}=1711^{+376}_{-280}$ Mpc, with covariance between the two distances. From these constraints on the cosmological distances, we infer the Hubble constant $H_0 = 74.2^{+2.7}_{-3.0}$ km s$^{-1}$ Mpc$^{-1}$ assuming a flat $Λ$CDM cosmology and a uniform prior for $Ω_{\rm m}$ as $Ω_{\rm m} \sim \mathcal{U}(0.05, 0.5)$. This measurement gives the most precise constraint on $H_0$ to date from a single lens. Our measurement is consistent with that obtained from the previous sample of six lenses analyzed by the $H_0$ Lenses in COSMOGRAIL's Wellspring (H0LiCOW) collaboration. It is also consistent with measurements of $H_0$ based on the local distance ladder, reinforcing the tension with the inference from early Universe probes, for example, with 2.2$σ$ discrepancy from the cosmic microwave background measurement. △ Less

Submitted 14 April, 2020; v1 submitted 14 October, 2019; originally announced October 2019.

Comments: 32 pages, 17 figures, 10 tables. Accepted by MNRAS

Twisted quasar light curves: implications for continuum reverberation map** of accretion disks

Authors: J. H-H. Chan, M. Millon, V. Bonvin, F. Courbin

Abstract: With the advent of high-cadence and multi-band photometric monitoring facilities, continuum reverberation map** is becoming of increasing importance to measure the physical size of quasar accretion disks. The method is based on the measurement of the time it takes for a signal to propagate from the center to the outer parts of the central engine, assuming the continuum light curve at a given wav… ▽ More With the advent of high-cadence and multi-band photometric monitoring facilities, continuum reverberation map** is becoming of increasing importance to measure the physical size of quasar accretion disks. The method is based on the measurement of the time it takes for a signal to propagate from the center to the outer parts of the central engine, assuming the continuum light curve at a given wavelength has a time shift of the order of a few days with respect to light curves obtained at shorter wavelengths. We show that with high-quality light curves, this assumption is not valid anymore and that light curves at different wavelengths are not only shifted in time but also distorted: in the context of the lamp-post model and thin-disk geometry, the multi-band light curves are in fact convolved by a transfer function whose size increase with wavelength. We illustrate the effect with simulated light curves in the LSST ugrizy bands and examine the impact on the delay measurements when using three different methods, namely JAVELIN, CREAM, and PyCS. We find that current accretion disk sizes estimated from JAVELIN and PyCS are underestimated by $\sim30\%$ and that unbiased measurement are only obtained with methods that properly take the skewed transfer functions into account, as the CREAM code does. With the LSST-like light curves, we expect to achieve measurement errors below $5\%$ with typical 2-day photometric cadence. △ Less

Submitted 6 November, 2019; v1 submitted 18 September, 2019; originally announced September 2019.

Comments: 11 pages, 7 figures

Journal ref: A&A 636, A52 (2020)

Cosmic dissonance: new physics or systematics behind a short sound horizon?

Authors: Nikki Arendse, Radosław J. Wojtak, Adriano Agnello, Geoff C. -F. Chen, Christopher D. Fassnacht, Dominique Sluse, Stefan Hilbert, Martin Millon, Vivien Bonvin, Kenneth C. Wong, Frédéric Courbin, Sherry H. Suyu, Simon Birrer, Tommaso Treu, Leon V. E. Koopmans

Abstract: Persistent tension between low-redshift observations and the Cosmic Microwave Background radiation (CMB), in terms of two fundamental distance scales set by the sound horizon $r_d$ and the Hubble constant $H_0$, suggests new physics beyond the Standard Model or residual systematics. We examine recently updated distance calibrations from Cepheids, gravitational lensing time-delay observations, and… ▽ More Persistent tension between low-redshift observations and the Cosmic Microwave Background radiation (CMB), in terms of two fundamental distance scales set by the sound horizon $r_d$ and the Hubble constant $H_0$, suggests new physics beyond the Standard Model or residual systematics. We examine recently updated distance calibrations from Cepheids, gravitational lensing time-delay observations, and the Tip of the Red Giant Branch. Calibrating the Baryon Acoustic Oscillations (BAO) and Type Ia supernovae with combinations of the distance indicators, we obtain a joint and self-consistent measurement of $H_0$ and $r_d$ at low redshift, independent of cosmological models and CMB inference. In an attempt to alleviate the tension between late-time and CMB-based measurements, we consider four extensions of the standard $Λ$CDM model. The sound horizon from our different measurements is $r_d=(137\pm3^{stat.}\pm2^{syst.})$~Mpc. Depending on the adopted distance indicators, the $combined$ tension in $H_0$ and $r_d$ ranges between 2.3 and 5.1 $σ$. We find that modifications of $Λ$CDM that change the physics after recombination fail to solve the problem, for the reason that they only resolve the tension in $H_0$, while the tension in $r_d$ remains unchanged. Pre-recombination extensions (with early dark energy or the effective number of neutrinos $\rm{N}_{\rm{eff}}=3.24 \pm 0.16$) are allowed by the data, unless the calibration from Cepheids is included. Results from time-delay lenses are consistent with those from distance-ladder calibrations and point to a discrepancy between absolute distance scales measured from the CMB (assuming the standard cosmological model) and late-time observations. New proposals to resolve this tension should be examined with respect to reconciling not only the Hubble constant but also the sound horizon derived from the CMB and other cosmological probes. △ Less

Submitted 13 May, 2020; v1 submitted 17 September, 2019; originally announced September 2019.

Comments: Accepted for publication in A&A; 14 pages, 8 figures, 4 tables

Journal ref: A&A 639, A57 (2020)

H0LiCOW XIII. A 2.4% measurement of $H_{0}$ from lensed quasars: $5.3σ$ tension between early and late-Universe probes

Authors: Kenneth C. Wong, Sherry H. Suyu, Geoff C. -F. Chen, Cristian E. Rusu, Martin Millon, Dominique Sluse, Vivien Bonvin, Christopher D. Fassnacht, Stefan Taubenberger, Matthew W. Auger, Simon Birrer, James H. H. Chan, Frederic Courbin, Stefan Hilbert, Olga Tihhonova, Tommaso Treu, Adriano Agnello, Xuheng Ding, Inh Jee, Eiichiro Komatsu, Anowar J. Shajib, Alessandro Sonnenfeld, Roger D. Blandford, Leon V. E. Koopmans, Philip J. Marshall , et al. (1 additional authors not shown)

Abstract: We present a measurement of the Hubble constant ($H_{0}$) and other cosmological parameters from a joint analysis of six gravitationally lensed quasars with measured time delays. All lenses except the first are analyzed blindly with respect to the cosmological parameters. In a flat $Λ$CDM cosmology, we find $H_{0} = 73.3_{-1.8}^{+1.7}$, a 2.4% precision measurement, in agreement with local measure… ▽ More We present a measurement of the Hubble constant ($H_{0}$) and other cosmological parameters from a joint analysis of six gravitationally lensed quasars with measured time delays. All lenses except the first are analyzed blindly with respect to the cosmological parameters. In a flat $Λ$CDM cosmology, we find $H_{0} = 73.3_{-1.8}^{+1.7}$, a 2.4% precision measurement, in agreement with local measurements of $H_{0}$ from type Ia supernovae calibrated by the distance ladder, but in $3.1σ$ tension with $Planck$ observations of the cosmic microwave background (CMB). This method is completely independent of both the supernovae and CMB analyses. A combination of time-delay cosmography and the distance ladder results is in $5.3σ$ tension with $Planck$ CMB determinations of $H_{0}$ in flat $Λ$CDM. We compute Bayes factors to verify that all lenses give statistically consistent results, showing that we are not underestimating our uncertainties and are able to control our systematics. We explore extensions to flat $Λ$CDM using constraints from time-delay cosmography alone, as well as combinations with other cosmological probes, including CMB observations from $Planck$, baryon acoustic oscillations, and type Ia supernovae. Time-delay cosmography improves the precision of the other probes, demonstrating the strong complementarity. Allowing for spatial curvature does not resolve the tension with $Planck$. Using the distance constraints from time-delay cosmography to anchor the type Ia supernova distance scale, we reduce the sensitivity of our $H_0$ inference to cosmological model assumptions. For six different cosmological models, our combined inference on $H_{0}$ ranges from $\sim73$-$78~\mathrm{km~s^{-1}~Mpc^{-1}}$, which is consistent with the local distance ladder constraints. △ Less

Submitted 5 November, 2019; v1 submitted 10 July, 2019; originally announced July 2019.

Comments: Accepted for publication in MNRAS; 23 pages, 13 figures, 8 tables

A SHARP view of H0LiCOW: $H_{0}$ from three time-delay gravitational lens systems with adaptive optics imaging

Authors: Geoff C. -F. Chen, Christopher D. Fassnacht, Sherry. H. Suyu, Cristian E. Rusu, James H. H. Chan, Kenneth C. Wong, Matthew W. Auger, Stefan Hilbert, Vivien Bonvin, Simon Birrer, Martin Millon, Leon V. E. Koopmans, David J. Lagattuta, John P. McKean, Simona Vegetti, Frederic Courbin, Xuheng Ding, Aleksi Halkola, Inh Jee, Anowar J. Shajib, Dominique Sluse, Alessandro Sonnenfeld, Tommaso Treu

Abstract: We present the measurement of the Hubble Constant, $H_0$, with three strong gravitational lens systems. We describe a blind analysis of both PG1115+080 and HE0435-1223 as well as an extension of our previous analysis of RXJ1131-1231. For each lens, we combine new adaptive optics (AO) imaging from the Keck Telescope, obtained as part of the SHARP AO effort, with Hubble Space Telescope (HST) imaging… ▽ More We present the measurement of the Hubble Constant, $H_0$, with three strong gravitational lens systems. We describe a blind analysis of both PG1115+080 and HE0435-1223 as well as an extension of our previous analysis of RXJ1131-1231. For each lens, we combine new adaptive optics (AO) imaging from the Keck Telescope, obtained as part of the SHARP AO effort, with Hubble Space Telescope (HST) imaging, velocity dispersion measurements, and a description of the line-of-sight mass distribution to build an accurate and precise lens mass model. This mass model is then combined with the COSMOGRAIL measured time delays in these systems to determine $H_{0}$. We do both an AO-only and an AO+HST analysis of the systems and find that AO and HST results are consistent. After unblinding, the AO-only analysis gives $H_{0}=82.8^{+9.4}_{-8.3}~\rm km\,s^{-1}\,Mpc^{-1}$ for PG1115+080, $H_{0}=70.1^{+5.3}_{-4.5}~\rm km\,s^{-1}\,Mpc^{-1}$ for HE0435-1223, and $H_{0}=77.0^{+4.0}_{-4.6}~\rm km\,s^{-1}\,Mpc^{-1}$ for RXJ1131-1231. The joint AO-only result for the three lenses is $H_{0}=75.6^{+3.2}_{-3.3}~\rm km\,s^{-1}\,Mpc^{-1}$. The joint result of the AO+HST analysis for the three lenses is $H_{0}=76.8^{+2.6}_{-2.6}~\rm km\,s^{-1}\,Mpc^{-1}$. All of the above results assume a flat $Λ$ cold dark matter cosmology with a uniform prior on $Ω_{\textrm{m}}$ in [0.05, 0.5] and $H_{0}$ in [0, 150] $\rm km\,s^{-1}\,Mpc^{-1}$. This work is a collaboration of the SHARP and H0LiCOW teams, and shows that AO data can be used as the high-resolution imaging component in lens-based measurements of $H_0$. The full time-delay cosmography results from a total of six strongly lensed systems are presented in a companion paper. △ Less

Submitted 4 July, 2019; originally announced July 2019.

Comments: 33 pages, 23 figures

The Hubble Constant determined through an inverse distance ladder including quasar time delays and Type Ia supernovae

Authors: S. Taubenberger, S. H. Suyu, E. Komatsu, I. Jee, S. Birrer, V. Bonvin, F. Courbin, C. E. Rusu, A. J. Shajib, K. C. Wong

Abstract: Context. The precise determination of the present-day expansion rate of the Universe, expressed through the Hubble constant $H_0$, is one of the most pressing challenges in modern cosmology. Assuming flat $Λ$CDM, $H_0$ inference at high redshift using cosmic-microwave-background data from Planck disagrees at the 4.4$σ$ level with measurements based on the local distance ladder made up of parallaxe… ▽ More Context. The precise determination of the present-day expansion rate of the Universe, expressed through the Hubble constant $H_0$, is one of the most pressing challenges in modern cosmology. Assuming flat $Λ$CDM, $H_0$ inference at high redshift using cosmic-microwave-background data from Planck disagrees at the 4.4$σ$ level with measurements based on the local distance ladder made up of parallaxes, Cepheids and Type Ia supernovae (SNe Ia), often referred to as "Hubble tension". Independent, cosmological-model-insensitive ways to infer $H_0$ are of critical importance. Aims. We apply an inverse-distance-ladder approach, combining strong-lensing time-delay-distance measurements with SN Ia data. By themselves, SNe Ia are merely good relative distance indicators, but by anchoring them to strong gravitational lenses one can obtain an $H_0$ measurement that is relatively insensitive to other cosmological parameters. Methods. A cosmological parameter estimate is performed for different cosmological background models, both for strong-lensing data alone and for the combined lensing + SNe Ia data sets. Results. The cosmological-model dependence of strong-lensing $H_0$ measurements is significantly mitigated through the inverse distance ladder. In combination with SN Ia data, the inferred $H_0$ consistently lies around 73-74 km s$^{-1}$ Mpc$^{-1}$, regardless of the assumed cosmological background model. Our results agree nicely with those from the local distance ladder, but there is a >2$σ$ tension with Planck results, and a ~1.5$σ$ discrepancy with results from an inverse distance ladder including Planck, Baryon Acoustic Oscillations and SNe Ia. Future strong-lensing distance measurements will reduce the uncertainties in $H_0$ from our inverse distance ladder. △ Less

Submitted 31 July, 2019; v1 submitted 29 May, 2019; originally announced May 2019.

Comments: 5 pages, 3 figures, A&A letters accepted version

Journal ref: A&A 628, L7 (2019)

H0LiCOW XII. Lens mass model of WFI2033-4723 and blind measurement of its time-delay distance and $H_0$

Authors: Cristian E. Rusu, Kenneth C. Wong, Vivien Bonvin, Dominique Sluse, Sherry H. Suyu, Christopher D. Fassnacht, James H. H. Chan, Stefan Hilbert, Matthew W. Auger, Alessandro Sonnenfeld, Simon Birrer, Frederic Courbin, Tommaso Treu, Geoff C. -F. Chen, Aleksi Halkola, Leon V. E. Koopmans, Philip J. Marshall, Anowar J. Shajib

Abstract: We present the lens mass model of the quadruply-imaged gravitationally lensed quasar WFI2033-4723, and perform a blind cosmographical analysis based on this system. Our analysis combines (1) time-delay measurements from 14 years of data obtained by the COSmological MOnitoring of GRAvItational Lenses (COSMOGRAIL) collaboration, (2) high-resolution $\textit{Hubble Space Telescope}$ imaging, (3) a me… ▽ More We present the lens mass model of the quadruply-imaged gravitationally lensed quasar WFI2033-4723, and perform a blind cosmographical analysis based on this system. Our analysis combines (1) time-delay measurements from 14 years of data obtained by the COSmological MOnitoring of GRAvItational Lenses (COSMOGRAIL) collaboration, (2) high-resolution $\textit{Hubble Space Telescope}$ imaging, (3) a measurement of the velocity dispersion of the lens galaxy based on ESO-MUSE data, and (4) multi-band, wide-field imaging and spectroscopy characterizing the lens environment. We account for all known sources of systematics, including the influence of nearby perturbers and complex line-of-sight structure, as well as the parametrization of the light and mass profiles of the lensing galaxy. After unblinding, we determine the effective time-delay distance to be $4784_{-248}^{+399}~\mathrm{Mpc}$, an average precision of $6.6\%$. This translates to a Hubble constant $H_{0} = 71.6_{-4.9}^{+3.8}~\mathrm{km~s^{-1}~Mpc^{-1}}$, assuming a flat $Λ$CDM cosmology with a uniform prior on $Ω_\mathrm{m}$ in the range [0.05, 0.5]. This work is part of the $H_0$ Lenses in COSMOGRAIL's Wellspring (H0LiCOW) collaboration, and the full time-delay cosmography results from a total of six strongly lensed systems are presented in a companion paper (H0LiCOW XIII). △ Less

Submitted 8 December, 2019; v1 submitted 22 May, 2019; originally announced May 2019.

Comments: Version accepted by MNRAS. 29 pages including appendix, 17 figures, 6 tables. arXiv admin note: text overlap with arXiv:1607.01403

H0LiCOW X: Spectroscopic/imaging survey and galaxy-group identification around the strong gravitational lens system WFI2033-4723

Authors: D. Sluse, C. E. Rusu, C. D. Fassnacht, A. Sonnenfeld, J. Richard, M. W. Auger, L. Coccato, K. C. Wong, S. H. Suyu, T. Treu, A. Agnello, S. Birrer, V. Bonvin, T. Collett, F. Courbin, S. Hilbert, L. V. E. Koopmans, O. Tihhanova, P. J. Marshall, G. Meylan, A. J. Shajib, J. Annis, S. Avila, E. Bertin, D. Brooks , et al. (43 additional authors not shown)

Abstract: Galaxies and galaxy groups located along the line of sight towards gravitationally lensed quasars produce high-order perturbations of the gravitational potential at the lens position. When these perturbation are too large, they can induce a systematic error on $H_0$ of a few-percent if the lens system is used for cosmological inference and the perturbers are not explicitly accounted for in the len… ▽ More Galaxies and galaxy groups located along the line of sight towards gravitationally lensed quasars produce high-order perturbations of the gravitational potential at the lens position. When these perturbation are too large, they can induce a systematic error on $H_0$ of a few-percent if the lens system is used for cosmological inference and the perturbers are not explicitly accounted for in the lens model. In this work, we present a detailed characterization of the environment of the lens system WFI2033-4723 ($z_{\rm src} = 1.662$, $z_{\rm lens}$ = 0.6575), one of the core targets of the H0LICOW project for which we present cosmological inferences in a companion paper (Rusu et al. 2019). We use the Gemini and ESO-Very Large telescopes to measure the spectroscopic redshifts of the brightest galaxies towards the lens, and use the ESO-MUSE integral field spectrograph to measure the velocity-dispersion of the lens ($σ_{\rm {los}}= 250^{+15}_{-21}$ km/s) and of several nearby galaxies. In addition, we measure photometric redshifts and stellar masses of all galaxies down to $i < 23$ mag, mainly based on Dark Energy Survey imaging (DR1). Our new catalog, complemented with literature data, more than doubles the number of known galaxy spectroscopic redshifts in the direct vicinity of the lens, expanding to 116 (64) the number of spectroscopic redshifts for galaxies separated by less than 3 arcmin (2 arcmin) from the lens. Using the flexion-shift as a measure of the amplitude of the gravitational perturbation, we identify 2 galaxy groups and 3 galaxies that require specific attention in the lens models. The ESO MUSE data enable us to measure the velocity-dispersions of three of these galaxies. These results are essential for the cosmological inference analysis presented in Rusu et al. (2019). △ Less

Submitted 6 September, 2019; v1 submitted 21 May, 2019; originally announced May 2019.

Comments: Matches the version accepted for publication by MNRAS. Note that this paper previously appeared as H0LICOW XI

Report number: FERMILAB-PUB-19-168-AE

COSMOGRAIL XVIII: time delays of the quadruply lensed quasar WFI2033-4723

Authors: V. Bonvin, M. Millon, J. H. H. Chan, F. Courbin, C. E. Rusu, D. Sluse, S. H. Suyu, K. C. Wong, C. D. Fassnacht, P. J. Marshall, T. Treu, E. Buckley-Geer, J. Frieman, A. Hempel, S. Kim, R. Lachaume, M. Rabus, D. C. -Y. Chao, M. Chijani, D. Gilman, K. Gilmore, K. Rojas, P. Williams, T. Anguita, C. S. Kochanek , et al. (4 additional authors not shown)

Abstract: We present new measurements of the time delays of WFI2033-4723. The data sets used in this work include 14 years of data taken at the 1.2m Leonhard Euler Swiss telescope, 13 years of data from the SMARTS 1.3m telescope at Las Campanas Observatory and a single year of high-cadence and high-precision monitoring at the MPIA 2.2m telescope. The time delays measured from these different data sets, all… ▽ More We present new measurements of the time delays of WFI2033-4723. The data sets used in this work include 14 years of data taken at the 1.2m Leonhard Euler Swiss telescope, 13 years of data from the SMARTS 1.3m telescope at Las Campanas Observatory and a single year of high-cadence and high-precision monitoring at the MPIA 2.2m telescope. The time delays measured from these different data sets, all taken in the R-band, are in good agreement with each other and with previous measurements from the literature. Combining all the time-delay estimates from our data sets results in Dt_AB = 36.2-0.8+0.7 days (2.1% precision), Dt_AC = -23.3-1.4+1.2 days (5.6%) and Dt_BC = -59.4-1.3+1.3 days (2.2%). In addition, the close image pair A1-A2 of the lensed quasars can be resolved in the MPIA 2.2m data. We measure a time delay consistent with zero in this pair of images. We also explore the prior distributions of microlensing time-delay potentially affecting the cosmological time-delay measurements of WFI2033-4723. There is however no strong indication in our measurements that microlensing time delay is neither present nor absent. This work is part of a H0LiCOW series focusing on measuring the Hubble constant from WFI2033-4723. △ Less

Submitted 20 May, 2019; originally announced May 2019.

Comments: Submitted to Astronomy and Astrophysics

The CORALIE survey for southern extrasolar planets XVIII. Three new massive planets and two low mass brown dwarfs at separation larger than 5 AU

Authors: E. L. Rickman, D. Ségransan, M. Marmier, S. Udry, F. Bouchy, C. Lovis, M. Mayor, F. Pepe, D. Queloz, N. C. Santos, R. Allart, V. Bonvin, P. Bratschi, F. Cersullo, B. Chazelas, A. Choplin, U. Conod, A. Deline, J. -B. Delisle, L. A. Dos Santos, P. Figueira, H. A. C. Giles, M. Girard, B. Lavie, D. Martin , et al. (14 additional authors not shown)

Abstract: Context. Since 1998, a planet-search around main sequence stars within 50~pc in the southern hemisphere has been carried out with the CORALIE spectrograph at La Silla Observatory. Aims. With an observing time span of more than 20 years, the CORALIE survey is able to detect long term trends in data with masses and separations large enough to select ideal targets for direct imaging. Detecting these… ▽ More Context. Since 1998, a planet-search around main sequence stars within 50~pc in the southern hemisphere has been carried out with the CORALIE spectrograph at La Silla Observatory. Aims. With an observing time span of more than 20 years, the CORALIE survey is able to detect long term trends in data with masses and separations large enough to select ideal targets for direct imaging. Detecting these giant companion candidates will allow us to start bridging the gap between radial velocity detected exoplanets and directly imaged planets and brown dwarfs. Methods. Long-term precise Doppler measurements with the CORALIE spectrograph reveal radial velocity signatures of massive planetary companions and brown dwarfs on long-period orbits. Results. In this paper we report the discovery of new companions orbiting HD~181234, HD~13724, HD~25015, HD~92987 and HD~50499. We also report updated orbital parameters for HD~50499b, HD~92788b and HD~98649b. In addition, we confirm the recent detection of HD~92788c. The newly reported companions span a period range of 15.6 to 40.4 years and a mass domain of 2.93 to 26.77 $M_{\mathrm{Jup}}$, the latter of which straddles the nominal boundary between planets and brown dwarfs. Conclusion. We have reported the detection of five new companions and updated parameters of four known extrasolar planets. We identify at least some of these companions to be promising candidates for imaging and further characterisation. △ Less

Submitted 3 April, 2019; v1 submitted 2 April, 2019; originally announced April 2019.

Comments: 18 pages, 11 figures, accepted to A&A

Journal ref: A&A 625, A71 (2019)

Strongly lensed SNe Ia in the era of LSST: observing cadence for lens discoveries and time-delay measurements

Authors: S. Huber, S. H. Suyu, U. M. Noebauer, V. Bonvin, D. Rothchild, J. H. H. Chan, H. Awan, F. Courbin, M. Kromer, P. Marshall, M. Oguri, T. Ribeiro, The LSST Dark Energy Science Collaboration

Abstract: The upcoming Large Synoptic Survey Telescope (LSST) will detect many strongly lensed Type Ia supernovae (LSNe Ia) for time-delay cosmography. This will provide an independent and direct way for measuring the Hubble constant $H_0$, which is necessary to address the current $4.4 σ$ tension in $H_0$ between the local distance ladder and the early Universe measurements. We present a detailed analysis… ▽ More The upcoming Large Synoptic Survey Telescope (LSST) will detect many strongly lensed Type Ia supernovae (LSNe Ia) for time-delay cosmography. This will provide an independent and direct way for measuring the Hubble constant $H_0$, which is necessary to address the current $4.4 σ$ tension in $H_0$ between the local distance ladder and the early Universe measurements. We present a detailed analysis of different observing strategies for the LSST, and quantify their impact on time-delay measurement between multiple images of LSNe Ia. For this, we produced microlensed mock-LSST light curves for which we estimated the time delay between different images. We find that using only LSST data for time-delay cosmography is not ideal. Instead, we advocate using LSST as a discovery machine for LSNe Ia, enabling time delay measurements from follow-up observations from other instruments in order to increase the number of systems by a factor of 2 to 16 depending on the observing strategy. Furthermore, we find that LSST observing strategies, which provide a good sampling frequency (the mean inter-night gap is around two days) and high cumulative season length (ten seasons with a season length of around 170 days per season), are favored. Rolling cadences subdivide the survey and focus on different parts in different years; these observing strategies trade the number of seasons for better sampling frequency. In our investigation, this leads to half the number of systems in comparison to the best observing strategy. Therefore rolling cadences are disfavored because the gain from the increased sampling frequency cannot compensate for the shortened cumulative season length. We anticipate that the sample of lensed SNe Ia from our preferred LSST cadence strategies with rapid follow-up observations would yield an independent percent-level constraint on $H_0$. △ Less

Submitted 11 October, 2019; v1 submitted 27 February, 2019; originally announced March 2019.

Comments: 25 pages, 22 figures; accepted for publication in A&A

Journal ref: A&A 631, A161 (2019)

Accretion Disk Size Measurement and Time Delays in the Lensed Quasar WFI 2033-4723

Authors: Christopher W. Morgan, Gregory E. Hyer, Vivien Bonvin, Ana M. Mosquera, Matthew Cornachione, Frederic Courbin, Christopher S. Kochanek, Emilio E. Falco

Abstract: We present 13 seasons of $R$-band photometry of the quadruply-lensed quasar WFI 2033-4723 from the 1.3m SMARTS telescope at CTIO and the 1.2m Euler Swiss Telescope at La Silla, in which we detect microlensing variability of $\sim0.2$ mags on a timescale of $\sim$6 years. Using a Bayesian Monte Carlo technique, we analyze the microlensing signal to obtain a measurement of the size of this system's… ▽ More We present 13 seasons of $R$-band photometry of the quadruply-lensed quasar WFI 2033-4723 from the 1.3m SMARTS telescope at CTIO and the 1.2m Euler Swiss Telescope at La Silla, in which we detect microlensing variability of $\sim0.2$ mags on a timescale of $\sim$6 years. Using a Bayesian Monte Carlo technique, we analyze the microlensing signal to obtain a measurement of the size of this system's accretion disk of $\log (r_s/{\rm cm}) = 15.86^{+0.25}_{-0.27}$ at $λ_{rest} = 2481{\rm Å}$, assuming a $60^\circ$ inclination angle. We confirm previous measurements of the BC and AB time delays, and we obtain a tentative measurement of the delay between the closely spaced A1 and A2 images of $Δt_{A1A2} = t_{A1} - t_{A2} = -3.9^{+3.4}_{-2.2}$ days. We conclude with an update to the Quasar Accretion Disk Size - Black Hole Mass Relation, in which we confirm that the accretion disk size predictions from simple thin disk theory are too small. △ Less

Submitted 13 December, 2018; originally announced December 2018.

Comments: 20 pages, 9 figures, Accepted by ApJ

H0LiCOW - IX. Cosmographic analysis of the doubly imaged quasar SDSS 1206+4332 and a new measurement of the Hubble constant

Authors: S. Birrer, T. Treu, C. E. Rusu, V. Bonvin, C. D. Fassnacht, J. H. H. Chan, A. Agnello, A. J. Shajib, G. C. -F. Chen, M. Auger, F. Courbin, S. Hilbert, D. Sluse, S. H. Suyu, K. C. Wong, P. Marshall, B. C. Lemaux, G. Meylan

Abstract: We present a blind time-delay strong lensing (TDSL) cosmographic analysis of the doubly imaged quasar SDSS 1206+4332. We combine the relative time delay between the quasar images, Hubble Space Telescope imaging, the Keck stellar velocity dispersion of the lensing galaxy, and wide-field photometric and spectroscopic data of the field to constrain two angular diameter distance relations. The combine… ▽ More We present a blind time-delay strong lensing (TDSL) cosmographic analysis of the doubly imaged quasar SDSS 1206+4332. We combine the relative time delay between the quasar images, Hubble Space Telescope imaging, the Keck stellar velocity dispersion of the lensing galaxy, and wide-field photometric and spectroscopic data of the field to constrain two angular diameter distance relations. The combined analysis is performed by forward modelling the individual data sets through a Bayesian hierarchical framework, and it is kept blind until the very end to prevent experimenter bias. After unblinding, the inferred distances imply a Hubble constant $H_0 = 68.8^{+5.4}_{-5.1}$ kms$^{-1}$Mpc$^{-1}$, assuming a flat Lambda cold dark matter cosmology with uniform prior on $Ω_{\rm m}$ in [0.05, 0.5]. The precision of our cosmographic measurement with the doubly imaged quasar SDSS 1206+4332 is comparable with those of quadruply imaged quasars and opens the path to perform on selected doubles the same analysis as anticipated for quads. Our analysis is based on a completely independent lensing code than our previous three H0LiCOW systems and the new measurement is fully consistent with those. We provide the analysis scripts paired with the publicly available software to facilitate independent analysis. The consistency between blind measurements with independent codes provides an important sanity check on lens modelling systematics. By combining the likelihoods of the four systems under the same prior, we obtain $H_0 = 72.5^{+2.1}_{-2.3}$kms$^{-1}$Mpc$^{-1}$. This measurement is independent of the distance ladder and other cosmological probes. △ Less

Submitted 24 May, 2019; v1 submitted 4 September, 2018; originally announced September 2018.

Comments: 30 pages, 17 figures, MNRAS published likelihood available here: http://shsuyu.github.io/H0LiCOW/site/notebooks/H0_from_lenses.html, all modeling and analysis scripts available upon request

Impact of the 3D source geometry on time-delay measurements of lensed type-Ia Supernovae

Authors: V. Bonvin, O. Tihhonova, M. Millon, J. H. H. Chan, E. Savary, S. Huber, F. Courbin

Abstract: It has recently been proposed that gravitationally lensed type-Ia supernovae can provide microlensing-free time-delay measurements provided that the measurement is taken during the achromatic expansion phase of the explosion and that color light curves are used rather than single-band light curves. If verified, this would provide both precise and accurate time-delay measurements, making lensed typ… ▽ More It has recently been proposed that gravitationally lensed type-Ia supernovae can provide microlensing-free time-delay measurements provided that the measurement is taken during the achromatic expansion phase of the explosion and that color light curves are used rather than single-band light curves. If verified, this would provide both precise and accurate time-delay measurements, making lensed type-Ia supernovae a new golden standard for time-delay cosmography. However, the 3D geometry of the expanding shell can introduce an additional bias that has not yet been fully explored. In this work, we present and discuss the impact of this effect on time-delay cosmography with lensed supernovae and find that on average it leads to a bias of a few tenths of a day for individual lensed systems. This is negligible in view of the cosmological time delays predicted for typical lensed type-Ia supernovae but not for the specific case of the recently discovered type-Ia supernova iPTF16geu, whose time delays are expected to be smaller than a day. △ Less

Submitted 26 February, 2019; v1 submitted 11 May, 2018; originally announced May 2018.

Comments: 7 pages, 4 figures, published in A&A

Journal ref: A&A 621, A55 (2019)

Constraining the microlensing effect on time delays with new time-delay prediction model in $H_{0}$ measurements

Authors: Geoff C. -F. Chen, James H. H. Chan, Vivien Bonvin, Christopher D. Fassnacht, Karina Rojas, Martin Millon, Fred Courbin, Sherry H. Suyu, Kenneth C. Wong, Dominique Sluse, Tommaso Treu, Anowar J. Shajib, Jen-Wei Hsueh, David J. Lagattuta, Leon V. E. Koopmans, Simona Vegetti, John P. McKean

Abstract: Time-delay strong lensing provides a unique way to directly measure the Hubble constant ($H_{0}$). The precision of the $H_{0}$ measurement depends on the uncertainties in the time-delay measurements, the mass distribution of the main deflector(s), and the mass distribution along the line of sight. Tie and Kochanek (2018) have proposed a new microlensing effect on time delays based on differential… ▽ More Time-delay strong lensing provides a unique way to directly measure the Hubble constant ($H_{0}$). The precision of the $H_{0}$ measurement depends on the uncertainties in the time-delay measurements, the mass distribution of the main deflector(s), and the mass distribution along the line of sight. Tie and Kochanek (2018) have proposed a new microlensing effect on time delays based on differential magnification of the coherent accretion disc variability of the lensed quasar. If real, this effect could significantly broaden the uncertainty on the time delay measurements by up to $30\%$ for lens systems such as PG1115+080, which have relatively short time delays and monitoring over several different epochs. In this paper we develop a new technique that uses the time-delay ratios and simulated microlensing maps within a Bayesian framework in order to limit the allowed combinations of microlensing delays and thus to lessen the uncertainties due to the proposed effect. We show that, under the assumption of Tie and Kochanek (2018), the uncertainty on the time-delay distance ($D_{Δt}$, which is proportional to 1/$H_{0}$) of short time-delay ($\sim18$ days) lens, PG1115+080, increases from $\sim7\%$ to $\sim10\%$ by simultaneously fitting the three time-delay measurements from the three different datasets across twenty years, while in the case of long time-delay ($\sim90$ days) lens, the microlensing effect on time delays is negligible as the uncertainty on $D_{Δt}$ of RXJ1131-1231 only increases from $\sim2.5\%$ to $\sim2.6\%$. △ Less

Submitted 28 August, 2018; v1 submitted 25 April, 2018; originally announced April 2018.

COSMOGRAIL XVII: Time delays for the quadruply imaged quasar PG 1115+080

Authors: V. Bonvin, J. H. H. Chan, M. Millon, K. Rojas, F. Courbin, G. C. -F. Chen, C. D. Fassnacht, E. Paic, M. Tewes, D. C. -Y. Chao, M. Chijani, D. Gilman, K. Gilmore, P. Williams, E. Buckley-Geer, J. Frieman, P. J. Marshall, S. H. Suyu, T. Treu, A. Hempel, S. Kim, R. Lachaume, M. Rabus, T. Anguita, G. Meylan , et al. (2 additional authors not shown)

Abstract: We present time-delay estimates for the quadruply imaged quasar PG 1115+080. Our resuls are based on almost daily observations for seven months at the ESO MPIA 2.2m telescope at La Silla Observatory, reaching a signal-to-noise ratio of about 1000 per quasar image. In addition, we re-analyse existing light curves from the literature that we complete with an additional three seasons of monitoring wi… ▽ More We present time-delay estimates for the quadruply imaged quasar PG 1115+080. Our resuls are based on almost daily observations for seven months at the ESO MPIA 2.2m telescope at La Silla Observatory, reaching a signal-to-noise ratio of about 1000 per quasar image. In addition, we re-analyse existing light curves from the literature that we complete with an additional three seasons of monitoring with the Mercator telescope at La Palma Observatory. When exploring the possible source of bias we consider the so-called microlensing time delay, a potential source of systematic error so far never directly accounted for in previous time-delay publications. In fifteen years of data on PG 1115+080, we find no strong evidence of microlensing time delay. Therefore not accounting for this effect, our time-delay estimates on the individual data sets are in good agreement with each other and with the literature. Combining the data sets, we obtain the most precise time-delay estimates to date on PG 1115+080, with Dt(AB) = 8.3+1.5-1.6 days (18.7% precision), Dt(AC) = 9.9+1.1-1.1 days (11.1%) and Dt(BC) = 18.8+1.6-1.6 days (8.5%). Turning these time delays into cosmological constraints is done in a companion paper that makes use of ground-based Adaptive Optics (AO) with the Keck telescope. △ Less

Submitted 24 April, 2018; originally announced April 2018.

Comments: 15 pages, 6 figures, submitted to A&A. Comments welcome

Journal ref: A&A 616, A183 (2018)

H0LiCOW VIII. A weak lensing measurement of the external convergence in the field of the lensed quasar HE$\,$0435$-$1223

Authors: O. Tihhonova, F. Courbin, D. Harvey, S. Hilbert, C. E. Rusu, C. D. Fassnacht, V. Bonvin, P. J. Marshall, G. Meylan, D. Sluse, S. H. Suyu, T. Treu, K. C. Wong

Abstract: We present a weak gravitational lensing measurement of the external convergence along the line of sight to the quadruply lensed quasar HE$\,$0435$-$1223. Using deep r-band images from Subaru-Suprime-Cam we observe galaxies down to a 3$σ$ limiting magnitude of $\sim 26$ mags resulting in a source galaxy density of 14 galaxies / arcmin$^2$ after redshift-based cuts. Using an inpainting technique and… ▽ More We present a weak gravitational lensing measurement of the external convergence along the line of sight to the quadruply lensed quasar HE$\,$0435$-$1223. Using deep r-band images from Subaru-Suprime-Cam we observe galaxies down to a 3$σ$ limiting magnitude of $\sim 26$ mags resulting in a source galaxy density of 14 galaxies / arcmin$^2$ after redshift-based cuts. Using an inpainting technique and Multi-Scale Entropy filtering algorithm, we find that the region in close proximity to the lens has an estimated external convergence of $κ=-0.012^{+0.020}_{-0.013}$ and is hence marginally under-dense. We also rule out the presence of any halo with a mass greater than $M_{\rm vir}=1.6\times10^{14}h^{-1}M_\odot$ (68$\%$ confidence limit). Our results, consistent with previous studies of this lens, confirm that the intervening mass along the line of sight to HE$\,$0435$-$1223 does not affect significantly the cosmological results inferred from the time delay measurements of that specific object. △ Less

Submitted 23 November, 2017; originally announced November 2017.

Comments: 14 pages, 8 figures, 2 tables

COSMOGRAIL XVI: Time delays for the quadruply imaged quasar DES J0408-5354 with high-cadence photometric monitoring

Authors: F. Courbin, V. Bonvin, E. Buckley-Geer, C. D. Fassnacht, J. Frieman, H. Lin, P. J. Marshall, S. H. Suyu, T. Treu, T. Anguita, V. Motta, G. Meylan, E. Paic, M. Tewes, A. Agnello, D. C. -Y. Chao, M. Chijani, D. Gilman, K. Rojas, P. Williams, A. Hempel, S. Kim, R. Lachaume, M. Rabus, T. M. C. Abbott , et al. (52 additional authors not shown)

Abstract: We present time-delay measurements for the new quadruply imaged quasar DES J0408-5354, the first quadruply imaged quasar found in the Dark Energy Survey (DES). Our result is made possible by implementing a new observational strategy using almost daily observations with the MPIA 2.2m telescope at La Silla observatory and deep exposures reaching a signal-to-noise ratio of about 1000 per quasar image… ▽ More We present time-delay measurements for the new quadruply imaged quasar DES J0408-5354, the first quadruply imaged quasar found in the Dark Energy Survey (DES). Our result is made possible by implementing a new observational strategy using almost daily observations with the MPIA 2.2m telescope at La Silla observatory and deep exposures reaching a signal-to-noise ratio of about 1000 per quasar image. This data quality allows us to catch small photometric variations (a few mmag rms) of the quasar, acting on temporal scales much shorter than microlensing, hence making the time delay measurement very robust against microlensing. In only 7 months we measure very accurately one of the time delays in DES J0408-5354: Dt(AB) = -112.1 +- 2.1 days (1.8%) using only the MPIA 2.2m data. In combination with data taken with the 1.2m Euler Swiss telescope, we also measure two delays involving the D component of the system Dt(AD) = -155.5 +- 12.8 days (8.2%) and Dt(BD) = -42.4 +- 17.6 days (41%), where all the error bars include systematics. Turning these time delays into cosmological constraints will require deep HST imaging or ground-based Adaptive Optics (AO), and information on the velocity field of the lensing galaxy. △ Less

Submitted 10 October, 2017; v1 submitted 28 June, 2017; originally announced June 2017.

Comments: 9 pages, 5 figures, accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 609, A71 (2018)

Models of the strongly lensed quasar DES J0408-5354

Authors: Adriano Agnello, Huan Lin, L. Buckley-Geer, T. Treu, V. Bonvin, F. Courbin, C. Lemon, T. Morishita, A. Amara, M. W. Auger, S. Birrer, J. Chan, T. Collett, A. More, C. D. Fassnacht, J. Frieman, P. J. Marshall, R. G. McMahon, G. Meylan, S. H. Suyu, F. Castander, D. Finley, A. Howell, C. Kochanek, M. Makler , et al. (60 additional authors not shown)

Abstract: We present gravitational lens models of the multiply imaged quasar DES J0408-5354, recently discovered in the Dark Energy Survey (DES) footprint, with the aim of interpreting its remarkable quad-like configuration. We first model the DES single-epoch $grizY$ images as a superposition of a lens galaxy and four point-like objects, obtaining spectral energy distributions (SEDs) and relative positions… ▽ More We present gravitational lens models of the multiply imaged quasar DES J0408-5354, recently discovered in the Dark Energy Survey (DES) footprint, with the aim of interpreting its remarkable quad-like configuration. We first model the DES single-epoch $grizY$ images as a superposition of a lens galaxy and four point-like objects, obtaining spectral energy distributions (SEDs) and relative positions for the objects. Three of the point sources (A,B,D) have SEDs compatible with the discovery quasar spectra, while the faintest point-like image (G2/C) shows significant reddening and a `grey' dimming of $\approx0.8$mag. In order to understand the lens configuration, we fit different models to the relative positions of A,B,D. Models with just a single deflector predict a fourth image at the location of G2/C but considerably brighter and bluer. The addition of a small satellite galaxy ($R_{\rm E}\approx0.2$") in the lens plane near the position of G2/C suppresses the flux of the fourth image and can explain both the reddening and grey dimming. All models predict a main deflector with Einstein radius between $1.7"$ and $2.0",$ velocity dispersion $267-280$km/s and enclosed mass $\approx 6\times10^{11}M_{\odot},$ even though higher resolution imaging data are needed to break residual degeneracies in model parameters. The longest time-delay (B-A) is estimated as $\approx 85$ (resp. $\approx125$) days by models with (resp. without) a perturber near G2/C. The configuration and predicted time-delays of J0408-5354 make it an excellent target for follow-up aimed at understanding the source quasar host galaxy and substructure in the lens, and measuring cosmological parameters. We also discuss some lessons learnt from J0408-5354 on lensed quasar finding strategies, due to its chromaticity and morphology. △ Less

Submitted 1 February, 2017; originally announced February 2017.

Comments: 12 pages, 8 figures, MNRAS subm. 30/01/2017. Based on the discovery results of H~Lin et al. (2017), ApJL subm. This paper has been approved for submission by DES, via Collaboration-Wide Review

H0LiCOW V. New COSMOGRAIL time delays of HE0435-1223: $H_0$ to 3.8% precision from strong lensing in a flat $Λ$CDM model

Authors: V. Bonvin, F. Courbin, S. H. Suyu, P. J. Marshall, C. E. Rusu, D. Sluse, M. Tewes, K. C. Wong, T. Collett, C. D. Fassnacht, T. Treu, M. W. Auger, S. Hilbert, L. V. E. Koopmans, G. Meylan, N. Rumbaugh, A. Sonnenfeld, C. Spiniello

Abstract: We present a new measurement of the Hubble Constant H0 and other cosmological parameters based on the joint analysis of three multiply-imaged quasar systems with measured gravitational time delays. First, we measure the time delay of HE0435-1223 from 13-year light curves obtained as part of the COSMOGRAIL project. Companion papers detail the modeling of the main deflectors and line of sight effect… ▽ More We present a new measurement of the Hubble Constant H0 and other cosmological parameters based on the joint analysis of three multiply-imaged quasar systems with measured gravitational time delays. First, we measure the time delay of HE0435-1223 from 13-year light curves obtained as part of the COSMOGRAIL project. Companion papers detail the modeling of the main deflectors and line of sight effects, and how these data are combined to determine the time-delay distance of HE 0435-1223. Crucially, the measurements are carried out blindly with respect to cosmological parameters in order to avoid confirmation bias. We then combine the time-delay distance of HE0435-1223 with previous measurements from systems B1608+656 and RXJ1131-1231 to create a Time Delay Strong Lensing probe (TDSL). In flat $Λ$CDM with free matter and energy density, we find $H_0$ = 71.9 +2.4 -3.0 km/s/Mpc and $Ω_Λ$ = 0.62 +0.24 -0.35 . This measurement is completely independent of, and in agreement with, the local distance ladder measurements of H0. We explore more general cosmological models combining TDSL with other probes, illustrating its power to break degeneracies inherent to other methods. The TDSL and Planck joint constraints are $H_0$ = 69.2 +1.4 -2.2 km/s/Mpc, $Ω_Λ$ = 0.70 +0.01 -0.01 and $Ω_k$ = 0.003 +0.004 -0.006 in open $Λ$CDM and $H_0$ = 79.0 +4.4 -4.2 km/s/Mpc, $Ω_{de}$ = 0.77 +0.02 -0.03 and $w$ = -1.38 +0.14 -0.16 in flat $w$CDM. Combined with Planck and Baryon Acoustic Oscillation data, when relaxing the constraints on the numbers of relativistic species we find $N_{eff}$ = 3.34 +0.21 -0.21 and when relaxing the total mass of neutrinos we find 0.182 eV. In an open $w$CDM in combination with Planck and CMB lensing we find $H_0$ = 77.9 +5.0 -4.2 km/s/Mpc, $Ω_{de}$ = 0.77 +0.03 -0.03, $Ω_k$ = -0.003 +0.004 -0.004 and $w$ = -1.37 +0.18 -0.23. △ Less

Submitted 25 January, 2017; v1 submitted 6 July, 2016; originally announced July 2016.

Comments: 19 pages, 7 figures, 4 tables. Accepted for publication in MNRAS. Light curves and simulated data can be downloaded at http://www.h0licow.org

MSC Class: 85A40 ACM Class: J.2

H0LiCOW IV. Lens mass model of HE 0435-1223 and blind measurement of its time-delay distance for cosmology

Authors: Kenneth C. Wong, Sherry H. Suyu, Matthew W. Auger, Vivien Bonvin, Frederic Courbin, Christopher D. Fassnacht, Aleksi Halkola, Cristian E. Rusu, Dominique Sluse, Alessandro Sonnenfeld, Tommaso Treu, Thomas E. Collett, Stefan Hilbert, Leon V. E. Koopmans, Philip J. Marshall, Nicholas Rumbaugh

Abstract: Strong gravitational lenses with measured time delays between the multiple images allow a direct measurement of the time-delay distance to the lens, and thus a measure of cosmological parameters, particularly the Hubble constant, $H_{0}$. We present a blind lens model analysis of the quadruply-imaged quasar lens HE 0435-1223 using deep Hubble Space Telescope imaging, updated time-delay measurement… ▽ More Strong gravitational lenses with measured time delays between the multiple images allow a direct measurement of the time-delay distance to the lens, and thus a measure of cosmological parameters, particularly the Hubble constant, $H_{0}$. We present a blind lens model analysis of the quadruply-imaged quasar lens HE 0435-1223 using deep Hubble Space Telescope imaging, updated time-delay measurements from the COSmological MOnitoring of GRAvItational Lenses (COSMOGRAIL), a measurement of the velocity dispersion of the lens galaxy based on Keck data, and a characterization of the mass distribution along the line of sight. HE 0435-1223 is the third lens analyzed as a part of the $H_{0}$ Lenses in COSMOGRAIL's Wellspring (H0LiCOW) project. We account for various sources of systematic uncertainty, including the detailed treatment of nearby perturbers, the parameterization of the galaxy light and mass profile, and the regions used for lens modeling. We constrain the effective time-delay distance to be $D_{Δt} = 2612_{-191}^{+208}~\mathrm{Mpc}$, a precision of 7.6%. From HE 0435-1223 alone, we infer a Hubble constant of $H_{0} = 73.1_{-6.0}^{+5.7}~\mathrm{km~s^{-1}~Mpc^{-1}}$ assuming a flat $Λ$CDM cosmology. The cosmographic inference based on the three lenses analyzed by H0LiCOW to date is presented in a companion paper (H0LiCOW Paper V). △ Less

Submitted 19 December, 2016; v1 submitted 5 July, 2016; originally announced July 2016.

Comments: Accepted for publication in MNRAS; 22 pages, 9 figures, 6 tables

H0LiCOW II. Spectroscopic survey and galaxy-group identification of the strong gravitational lens system HE0435-1223

Authors: D. Sluse, A. Sonnenfeld, N. Rumbaugh, C. E. Rusu, C. D. Fassnacht, T. Treu, S. H. Suyu, K. C. Wong, M. W. Auger, V. Bonvin, T. Collett, F. Courbin, S. Hilbert, L. V. E. Koopmans, P. J. Marshall, G. Meylan, C. Spiniello, M. Tewes

Abstract: Galaxies located in the environment or on the line of sight towards gravitational lenses can significantly affect lensing observables, and can lead to systematic errors on the measurement of $H_0$ from the time-delay technique. We present the results of a systematic spectroscopic identification of the galaxies in the field of view of the lensed quasar HE0435-1223, using the W. M. Keck, Gemini and… ▽ More Galaxies located in the environment or on the line of sight towards gravitational lenses can significantly affect lensing observables, and can lead to systematic errors on the measurement of $H_0$ from the time-delay technique. We present the results of a systematic spectroscopic identification of the galaxies in the field of view of the lensed quasar HE0435-1223, using the W. M. Keck, Gemini and ESO-Very Large telescopes. Our new catalog triples the number of known galaxy redshifts in the vicinity of the lens, expanding to 102 the number of measured redshifts for galaxies separated by less than 3 arcmin from the lens. We complement our catalog with literature data to gather redshifts up to 15 arcmin from the lens, and search for galaxy groups or clusters projected towards HE0435-1223. We confirm that the lens is a member of a small group that includes at least 12 galaxies, and find 8 other group candidates near the line of sight of the lens. The flexion shift, namely the shift of lensed images produced by high order perturbation of the lens potential, is calculated for each galaxy/group and used to identify which objects produce the largest perturbation of the lens potential. This analysis demonstrates that i) at most three of the five brightest galaxies projected within 12 arcsec of the lens need to be explicitly used in the lens models, and ii) the groups can be treated in the lens model as an external tidal field (shear) contribution. △ Less

Submitted 24 January, 2017; v1 submitted 1 July, 2016; originally announced July 2016.

Comments: Version revised to address referee's comments, submitted to MNRAS, 21 pages (incl. Appendix). Data associated to the paper available from the H0LICOW website www.h0licow.org

H0LiCOW I. $H_0$ Lenses in COSMOGRAIL's Wellspring: Program Overview

Authors: S. H. Suyu, V. Bonvin, F. Courbin, C. D. Fassnacht, C. E. Rusu, D. Sluse, T. Treu, K. C. Wong, M. W. Auger, X. Ding, S. Hilbert, P. J. Marshall, N. Rumbaugh, A. Sonnenfeld, M. Tewes, O. Tihhonova, A. Agnello, R. D. Blandford, G. C. -F. Chen, T. Collett, L. V. E. Koopmans, K. Liao, G. Meylan, C. Spiniello

Abstract: Strong gravitational lens systems with time delays between the multiple images allow measurements of time-delay distances, which are primarily sensitive to the Hubble constant that is key to probing dark energy, neutrino physics, and the spatial curvature of the Universe, as well as discovering new physics. We present H0LiCOW ($H_0$ Lenses in COSMOGRAIL's Wellspring), a program that aims to measur… ▽ More Strong gravitational lens systems with time delays between the multiple images allow measurements of time-delay distances, which are primarily sensitive to the Hubble constant that is key to probing dark energy, neutrino physics, and the spatial curvature of the Universe, as well as discovering new physics. We present H0LiCOW ($H_0$ Lenses in COSMOGRAIL's Wellspring), a program that aims to measure $H_0$ with $<3.5\%$ uncertainty from five lens systems (B1608+656, RXJ1131-1231, HE0435-1223, WFI2033-4723 and HE1104-1805). We have been acquiring (1) time delays through COSMOGRAIL and Very Large Array monitoring, (2) high-resolution Hubble Space Telescope imaging for the lens mass modeling, (3) wide-field imaging and spectroscopy to characterize the lens environment, and (4) moderate-resolution spectroscopy to obtain the stellar velocity dispersion of the lenses for mass modeling. In cosmological models with one-parameter extension to flat $Λ$CDM, we expect to measure $H_0$ to $<3.5\%$ in most models, spatial curvature $Ω_{\rm k}$ to 0.004, $w$ to 0.14, and the effective number of neutrino species to 0.2 (1$σ$ uncertainties) when combined with current CMB experiments. These are, respectively, a factor of $\sim15$, $\sim2$, and $\sim1.5$ tighter than CMB alone. Our data set will further enable us to study the stellar initial mass function of the lens galaxies, and the co-evolution of supermassive black holes and their host galaxies. This program will provide a foundation for extracting cosmological distances from the hundreds of time-delay lenses that are expected to be discovered in current and future surveys. △ Less

Submitted 22 January, 2017; v1 submitted 30 June, 2016; originally announced July 2016.

Comments: 16 pages, 3 figures, submitted to MNRAS and revised based on referee's comments

Computational issues in chemo-dynamical modelling of the formation and evolution of galaxies

Authors: Yves Revaz, Alexis Arnaudon, Matthew Nichols, Vivien Bonvin, Pascale Jablonka

Abstract: Chemo-dynamical N-body simulations are an essential tool for understanding the formation and evolution of galaxies. As the number of observationally determined stellar abundances continues to climb, these simulations are able to provide new constraints on the early star formaton history and chemical evolution inside both the Milky Way and Local Group dwarf galaxies. Here, we aim to reproduce the l… ▽ More Chemo-dynamical N-body simulations are an essential tool for understanding the formation and evolution of galaxies. As the number of observationally determined stellar abundances continues to climb, these simulations are able to provide new constraints on the early star formaton history and chemical evolution inside both the Milky Way and Local Group dwarf galaxies. Here, we aim to reproduce the low $α$-element scatter observed in metal-poor stars. We first demonstrate that as stellar particles inside simulations drop below a mass threshold, increases in the resolution produce an unacceptably large scatter as one particle is no longer a good approximation of an entire stellar population. This threshold occurs at around $10^3\,\rm{M_\odot}$, a mass limit easily reached in current (and future) simulations. By simulating the Sextans and Fornax dwarf spheroidal galaxies we show that this increase in scatter at high resolutions arises from stochastic supernovae explosions. In order to reduce this scatter down to the observed value, we show the necessity of introducing a metal mixing scheme into particle-based simulations. The impact of the method used to inject the metals into the surrounding gas is also discussed. We finally summarise the best approach for accurately reproducing the scatter in simulations of both Local Group dwarf galaxies and in the Milky Way. △ Less

Submitted 8 January, 2016; originally announced January 2016.

Comments: 23 pages, 18 figures, accepted for publication in Astronomy and Astrophysics

COSMOGRAIL: the COSmological MOnitoring of GRAvItational Lenses XV. Assessing the achievability and precision of time-delay measurements

Authors: V. Bonvin, M. Tewes, F. Courbin, T. Kuntzer, D. Sluse, G. Meylan

Abstract: COSMOGRAIL is a long-term photometric monitoring of gravitationally lensed QSOs aimed at implementing Refsdal's time-delay method to measure cosmological parameters, in particular H0. Given long and well sampled light curves of strongly lensed QSOs, time-delay measurements require numerical techniques whose quality must be assessed. To this end, and also in view of future monitoring programs or su… ▽ More COSMOGRAIL is a long-term photometric monitoring of gravitationally lensed QSOs aimed at implementing Refsdal's time-delay method to measure cosmological parameters, in particular H0. Given long and well sampled light curves of strongly lensed QSOs, time-delay measurements require numerical techniques whose quality must be assessed. To this end, and also in view of future monitoring programs or surveys such as the LSST, a blind signal processing competition named Time Delay Challenge 1 (TDC1) was held in 2014. The aim of the present paper, which is based on the simulated light curves from the TDC1, is double. First, we test the performance of the time-delay measurement techniques currently used in COSMOGRAIL. Second, we analyse the quantity and quality of the harvest of time delays obtained from the TDC1 simulations. To achieve these goals, we first discover time delays through a careful inspection of the light curves via a dedicated visual interface. Our measurement algorithms can then be applied to the data in an automated way. We show that our techniques have no significant biases, and yield adequate uncertainty estimates resulting in reduced chi2 values between 0.5 and 1.0. We provide estimates for the number and precision of time-delay measurements that can be expected from future time-delay monitoring campaigns as a function of the photometric signal-to-noise ratio and of the true time delay. We make our blind measurements on the TDC1 data publicly available △ Less

Submitted 27 January, 2016; v1 submitted 24 June, 2015; originally announced June 2015.

Comments: 11 pages, 8 figures, published in Astronomy & Astrophysics

Journal ref: A&A 585, A88 (2016)

Strong Lens Time Delay Challenge: II. Results of TDC1

Authors: Kai Liao, Tommaso Treu, Phil Marshall, Christopher D. Fassnacht, Nick Rumbaugh, Gregory Dobler, Amir Aghamousa, Vivien Bonvin, Frederic Courbin, Alireza Hojjati, Neal Jackson, Vinay Kashyap, S. Rathna Kumar, Eric Linder, Kaisey Mandel, Xiao-Li Meng, Georges Meylan, Leonidas A. Moustakas, Tushar P. Prabhu, Andrew Romero-Wolf, Arman Shafieloo, Aneta Siemiginowska, Chelliah S. Stalin, Hyungsuk Tak, Malte Tewes , et al. (1 additional authors not shown)

Abstract: We present the results of the first strong lens time delay challenge. The motivation, experimental design, and entry level challenge are described in a companion paper. This paper presents the main challenge, TDC1, which consisted of analyzing thousands of simulated light curves blindly. The observational properties of the light curves cover the range in quality obtained for current targeted effor… ▽ More We present the results of the first strong lens time delay challenge. The motivation, experimental design, and entry level challenge are described in a companion paper. This paper presents the main challenge, TDC1, which consisted of analyzing thousands of simulated light curves blindly. The observational properties of the light curves cover the range in quality obtained for current targeted efforts (e.g.,~COSMOGRAIL) and expected from future synoptic surveys (e.g.,~LSST), and include simulated systematic errors. \nteamsA\ teams participated in TDC1, submitting results from \nmethods\ different method variants. After a describing each method, we compute and analyze basic statistics measuring accuracy (or bias) $A$, goodness of fit $χ^2$, precision $P$, and success rate $f$. For some methods we identify outliers as an important issue. Other methods show that outliers can be controlled via visual inspection or conservative quality control. Several methods are competitive, i.e., give $|A|<0.03$, $P<0.03$, and $χ^2<1.5$, with some of the methods already reaching sub-percent accuracy. The fraction of light curves yielding a time delay measurement is typically in the range $f = $20--40\%. It depends strongly on the quality of the data: COSMOGRAIL-quality cadence and light curve lengths yield significantly higher $f$ than does sparser sampling. Taking the results of TDC1 at face value, we estimate that LSST should provide around 400 robust time-delay measurements, each with $P<0.03$ and $|A|<0.01$, comparable to current lens modeling uncertainties. In terms of observing strategies, we find that $A$ and $f$ depend mostly on season length, while P depends mostly on cadence and campaign duration. △ Less

Submitted 11 December, 2014; v1 submitted 3 September, 2014; originally announced September 2014.

Comments: referee's comments incorporated; to appear in ApJ

Journal ref: 2015, ApJ, 800, 11