-
Slow Light Augmented Unbalanced Interferometry for Extreme Enhancement in Sensitivity of Measuring Frequency Shift in a Laser
Authors:
Ruoxi Zhu,
Zifan Zhou,
**yang Li,
Jason Bonacum,
David D. Smith,
Selim M. Shahriar
Abstract:
We demonstrate a slow-light augmented unbalanced Mach-Zehnder interferometer (MZI) which can be used to enhance very significantly the sensitivity of measuring the frequency shift in a laser. The degree of enhancement depends on the group index of the slow-light medium, the degree of imbalance between the physical lengths of the two arms of the MZI, and the spectral width of the laser. For a laser…
▽ More
We demonstrate a slow-light augmented unbalanced Mach-Zehnder interferometer (MZI) which can be used to enhance very significantly the sensitivity of measuring the frequency shift in a laser. The degree of enhancement depends on the group index of the slow-light medium, the degree of imbalance between the physical lengths of the two arms of the MZI, and the spectral width of the laser. For a laser based on a high-finesse cavity, yielding a narrow quantum noise limited spectral width, the group index has to be larger than the finesse in order to achieve enhancement in measurement sensitivity. For the reported results, strong slow-light effect is produced by employing electro-magnetically induced transparency via coherent population trap** in a buffer-gas loaded vapor cell of Rb atoms, with a maximum group index of ~1759. The observed enhancement in sensitivity for a range of group indices agrees well with the theoretical model. The maximum enhancement factor observed is ~22355, and much larger values can be obtained using cold atoms for producing the slow-light effect, for example. The sensitivity of any sensor that relies on measuring the frequency shift of a laser can be enhanced substantially using this technique. These include, but are not limited to, gyroscopes and accelerometers based on a conventional ring laser or a superluminal ring laser, and detectors for virialized ultra-light field dark matter. We also show how similar enhancements can be achieved in a slow-light augmented unbalanced Michelson interferometer.
△ Less
Submitted 8 March, 2024;
originally announced March 2024.
-
Implementation of large momentum transfer without swap** the directions of the Raman beams
Authors:
**yang Li,
Jason Bonacum,
Selim M. Shahriar
Abstract:
Large momentum transfer (LMT) is an important technique for magnifying the phase shift accumulated in an atom interferometer. Existing approaches to implement Raman-transition-based LMT all involve physically swap** the propagation directions of the two counterpropagating Raman beams repeatedly, which could significantly complicate the experimental system. Here, we demonstrate a simpler approach…
▽ More
Large momentum transfer (LMT) is an important technique for magnifying the phase shift accumulated in an atom interferometer. Existing approaches to implement Raman-transition-based LMT all involve physically swap** the propagation directions of the two counterpropagating Raman beams repeatedly, which could significantly complicate the experimental system. Here, we demonstrate a simpler approach for Raman-transition-based LMT that does not involve a physical swap of the directions of the Raman beams. In this approach, both Raman beams are retroreflected, and a Doppler shift induced by a bias velocity of the atoms is used to separate the transition frequencies of the two pairs of counterpropagating Raman beams. Therefore, an effective swap of the directions of the Raman beams can be achieved by shifting the relative frequency between the two Raman beams from the resonant frequency of one pair of the Raman beams to that of the other pair. We demonstrate the use of this technique for LMT-augmented accelerometry using atoms released from a magneto-optic trap.
△ Less
Submitted 9 February, 2024;
originally announced February 2024.
-
Sensitivity and Bandwidth of a Point-Source-Interferometry-based Inertial Measurement Unit Employing Large Momentum Transfer and Launched Atoms
Authors:
**yang Li,
Timothy Kovachy,
Jason Bonacum,
Selim M. Shahriar
Abstract:
We analyze theoretically the sensitivity of accelerometry and rotation sensing with a point source interferometer employing large momentum transfer (LMT) and present a design of an inertial measurement unit (IMU) that can measure rotation around and acceleration along each of the three axes. In this design, the launching technique is used to realize the LMT process without the need to physically c…
▽ More
We analyze theoretically the sensitivity of accelerometry and rotation sensing with a point source interferometer employing large momentum transfer (LMT) and present a design of an inertial measurement unit (IMU) that can measure rotation around and acceleration along each of the three axes. In this design, the launching technique is used to realize the LMT process without the need to physically change directions of the Raman pulses, thus significantly simplifying the apparatus. We also describe an explicit scheme for such an IMU.
△ Less
Submitted 18 June, 2024; v1 submitted 5 February, 2024;
originally announced February 2024.
-
Spin squeezing enhanced dual species atom interferometric accelerometer employing large momentum transfer for precision test of the equivalence principle
Authors:
**yang Li,
Gregório R. M. da Silva,
Schuyler Kain,
Jason Bonacum,
David D. Smith,
Timothy Kovachy,
Selim M. Shahriar
Abstract:
We theoretically investigate the feasibility of applying spin squeezing to a light pulse atom interferometer in the presence of large momentum transfer using off-resonant Raman transitions, in order to enhance the sensitivity of accelerometry close to the Heisenberg limit. We also show how to implement this scheme in a dual-species atom interferometer for precision test of the equivalence principl…
▽ More
We theoretically investigate the feasibility of applying spin squeezing to a light pulse atom interferometer in the presence of large momentum transfer using off-resonant Raman transitions, in order to enhance the sensitivity of accelerometry close to the Heisenberg limit. We also show how to implement this scheme in a dual-species atom interferometer for precision test of the equivalence principle by measuring the Eotvos parameter, and identify the spin squeezing protocol that is best suited for such an experiment. For a space borne platform in low earth orbit, such a scheme may eventually enable the measurement of the Eotvos parameter with a sensitivity of the order of 10^(-20).
△ Less
Submitted 18 February, 2023; v1 submitted 14 September, 2022;
originally announced September 2022.
-
Multi-axis Accelerometry and Rotation Sensing using a Point Source Atom Interferometer
Authors:
**yang Li,
Gregório R. M. da Silva,
Jason Bonacum,
Timothy Kovachy,
Selim M. Shahriar
Abstract:
A point source atom interferometer (PSI) is a device where atoms are split and recombined by applying a temporal sequence of Raman pulses during the expansion of a cloud of cold atoms behaving approximately as a point source. Unlike a conventional light pulse atom interferometer, the PSI can produce a signal that corresponds to multi-axis rotation only, independent of acceleration. In addition, it…
▽ More
A point source atom interferometer (PSI) is a device where atoms are split and recombined by applying a temporal sequence of Raman pulses during the expansion of a cloud of cold atoms behaving approximately as a point source. Unlike a conventional light pulse atom interferometer, the PSI can produce a signal that corresponds to multi-axis rotation only, independent of acceleration. In addition, it can be used to measure acceleration along one direction, independent of rotation. Here, we describe a modified PSI that can be used to measure multi-axis rotation and multi-axis acceleration. Specifically, this type of PSI can be used to measure two-axes rotation around the directions perpendicular to the light pulses, as well as the acceleration in all three directions, with only one pair of Raman beams. Using two pairs of Raman beams in orthogonal directions sequentially, such a scheme would enable the realization of a complete atom interferometric inertial measurement unit.
△ Less
Submitted 25 March, 2022; v1 submitted 8 March, 2022;
originally announced March 2022.
-
Atomic-Resolution Visualization and Do** Effects of Complex Structures in Intercalated Bilayer Graphene
Authors:
Jason P. Bonacum,
Andrew O'Hara,
De-Liang Bao,
Oleg S. Ovchinnikov,
Yan-Fang Zhang,
Georgy Gordeev,
Sonakshi Arora,
Stephanie Reich,
Juan-Carlos Idrobo,
Richard F. Haglund,
Sokrates T. Pantelides,
Kirill Bolotin
Abstract:
Molecules intercalating two-dimensional (2D) materials form complex structures that have been mostly characterized by spatially averaged techniques. Here we use aberration-corrected scanning transmission electron microscopy and density-functional-theory (DFT) calculations to study the atomic structure of bilayer graphene (BLG) and few-layer graphene (FLG) intercalated with FeCl$_3$. In BLG we disc…
▽ More
Molecules intercalating two-dimensional (2D) materials form complex structures that have been mostly characterized by spatially averaged techniques. Here we use aberration-corrected scanning transmission electron microscopy and density-functional-theory (DFT) calculations to study the atomic structure of bilayer graphene (BLG) and few-layer graphene (FLG) intercalated with FeCl$_3$. In BLG we discover two distinct intercalated structures that we identify as monolayer-FeCl$_3$ and monolayer-FeCl$_2$. The two structures are separated by atomically sharp boundaries and induce large but different free-carrier densities in the graphene layers, $7.1\times10^{13}$ cm$^{-2}$ and $7.1\times10^{13}$ cm$^{-2}$ respectively. In FLG, we observe multiple FeCl$_3$ layers stacked in a variety of possible configurations with respect to one another. Finally, we find that the microscope's electron beam can convert the FeCl$_3$ monolayer into FeOCl monolayers in a rectangular lattice. These results reveal the need for a combination of atomically-resolved microscopy, spectroscopy, and DFT calculations to identify intercalated structures and study their properties.
△ Less
Submitted 2 March, 2019;
originally announced March 2019.
-
Imaging superatomic molecular orbitals in a ${\bf C_{60}}$ molecule through four 800-nm photons
Authors:
G. P. Zhang,
H. P. Zhu,
Y. H. Bai,
J. Bonacum,
X. S. Wu,
Thomas F. George
Abstract:
Superatomic molecular orbitals (SAMO) in C60 are ideal building blocks for functional nanostructures. However, imaging them spatially in the gas phase has been unsuccessful. It is found experimentally that if C60 is excited by an 800-nm laser, the photoelectron casts an anisotropic velocity image, but the image becomes isotropic if excited at a 400-nm wavelength. This diffuse image difference has…
▽ More
Superatomic molecular orbitals (SAMO) in C60 are ideal building blocks for functional nanostructures. However, imaging them spatially in the gas phase has been unsuccessful. It is found experimentally that if C60 is excited by an 800-nm laser, the photoelectron casts an anisotropic velocity image, but the image becomes isotropic if excited at a 400-nm wavelength. This diffuse image difference has been attributed to electron thermal ionization, but more recent experiments (800 nm) reveal a clear non-diffuse image superimposed on the diffuse image, whose origin remains a mystery. Here we show that the non-diffuse anisotropic image is the precursor of the $f$ SAMO. We predict that four 800-nm photons can directly access the $1f$ SAMO, and with one more photon, can image the orbital, with the photoelectron angular distribution having two maxima at 0$^\circ$ and 180$^\circ$ and two humps separated by 56.5$^\circ$. Since two 400-nm photons only resonantly excite the spherical $1s$ SAMO and four 800-nm photon excite the anisotropic $1f$ SAMO, our finding gives a natural explanation of the non-diffuse image difference, complementing the thermal scenario.
△ Less
Submitted 26 April, 2015;
originally announced April 2015.
