Showing 1–5 of 5 results for author: Bolotnov, I A

Interface Capturing Flow Boiling Simulations in a Compact Heat Exchanger

Authors: Anna Iskhakova, Yoshiyuki Kondo, Koichi Tanimoto, Nam T. Dinh, Igor A. Bolotnov

Abstract: High-fidelity flow boiling simulations are conducted in a vertical minichannel with offset strip fins (OSF) using R113 as a working fluid. Finite-element code PHASTA coupled with level set method for interface capturing is employed to model multiple sequential bubble nucleation using transient three-dimensional approach. The code performance is validated against experiments for a single nucleation… ▽ More High-fidelity flow boiling simulations are conducted in a vertical minichannel with offset strip fins (OSF) using R113 as a working fluid. Finite-element code PHASTA coupled with level set method for interface capturing is employed to model multiple sequential bubble nucleation using transient three-dimensional approach. The code performance is validated against experiments for a single nucleation site in a vertical rectangular channel. To test the code performance, the studies for a bubble departing from the wall in a minichannel with OSF are carried out first. Due to low heat flux values applied to the channel (1 kW/m2) contribution from the microlayer is not considered. The influence of surface characteristics such as contact angle and liquid superheat on bubble dynamics are analyzed. Local two-phase heat transfer coefficient is also investigated. To achieve higher void fractions, two conic nucleation cavities are introduced in the same channel with OSF. Observed bubble characteristics (departure diameter, bubble departure frequency) are evaluated and bubble trajectories are presented and analyzed. Local heat transfer coefficient is evaluated for each simulation case. The results show approximately 2.5 times increase in the local heat transfer coefficient when individual bubbles approach the wall. With a smaller bubble nucleation diameter, heat transfer coefficient increases by two times. The current work shows the capability of modeling flow boiling phenomena in such complex geometry as OSF as well as data processing advantages of high-resolution simulations. △ Less

Submitted 18 November, 2022; originally announced November 2022.

Direct Numerical Simulation of Low and Unitary Prandtl Number Fluids in Reactor Downcomer Geometry

Authors: Cheng-Kai Tai, Tri Nguyen, Arsen S. Iskhakov, Elia Merzari, Nam Dinh, Igor A. Bolotnov

Abstract: Buoyancy effect on low-flow condition convective heat transfer of non-conventional coolants, such as liquid metal and molten salts, is a crucial safety factor to advanced reactors under transient or accidental scenarios. The distinct heat transfer characteristics of non-unitary Prandtl fluids and the inherent complexity of the low-flow mixed convection phenomena requires the development of novel t… ▽ More Buoyancy effect on low-flow condition convective heat transfer of non-conventional coolants, such as liquid metal and molten salts, is a crucial safety factor to advanced reactors under transient or accidental scenarios. The distinct heat transfer characteristics of non-unitary Prandtl fluids and the inherent complexity of the low-flow mixed convection phenomena requires the development of novel turbulent and heat transfer models that are adaptive to different spatiotemporal scales involved in the mixed convection heat transfer. In this work, direct numerical simulation of low-flow mixed convection is carried out at low-to-unitary Prandtl numbers that are of industrial interest. Time-averaged statistics, turbulent Prandtl number, as well as time signals are analyzed to investigate mixed convection phenomenon. From the time-averaged statistics, buoyant plume altered velocity boundary layer as well as the intensity of the fluctuation near both walls and channel centerline. Buoyancy effect also rendered different degree of convective heat transfer enhancement and impairment depends on Prandtl and Richardson number. Analysis of time series was conducted on the sodium mixed convection case to emphasize on the low-Pr mixed convection behavior at transition region. Resulting power spectra density and wavelet spectrogram suggests possible large convective structure in transition region. Future work will focus on providing broader data coverage on Pr-Re-Ri parameter space to facilitate more comprehensive analysis of mixed convection. △ Less

Submitted 1 April, 2022; originally announced April 2022.

Direct Numerical Simulation of High Prandtl Number Fluid Flow in the Downcomer of an Advanced Reactor

Authors: Tri Nguyen, Elia Merzari, Cheng-Kai Tai, Igor A. Bolotnov

Abstract: The passive safety is a crucial feature of advanced nuclear reactor (Gen IV) design. During loss of power scenarios, the downcomer plays a crucial role. The fluid-flow behavior in the downcomer can involve forced to mixed to natural convection and characterizing the heat transfer for these changing regimes is a daunting challenge. High-resolution heat transfer numerical database can potentially su… ▽ More The passive safety is a crucial feature of advanced nuclear reactor (Gen IV) design. During loss of power scenarios, the downcomer plays a crucial role. The fluid-flow behavior in the downcomer can involve forced to mixed to natural convection and characterizing the heat transfer for these changing regimes is a daunting challenge. High-resolution heat transfer numerical database can potentially support the development of precise and affordable reduced resolution heat transfer models. These models can be designed based on a multiscale hierarchy developed as part of the recently DOE-funded center of excellence for thermal-fluids applications in nuclear energy. In this paper, the downcomer is simplified to heated parallel plates and High Prandtl number fluid (FLiBe) is considered for all simulations. The calculations are performed for a wide range of Richardson number from 0 to 400 at 2 different FLiBe Prandtl numbers (12 and 24) which result in 40 simulated Cases in total. Time averaged and time series statistics as well as Nusselt number correlations are investigated to illuminate the mixed convection behaviors. The calculated database will be instrumental in understanding the flow behaviors in the downcomer. Ultimately, we aimed to evaluate existing heat transfer correlations and some modifications will be proposed for Cases where no satisfactory choice is available. △ Less

Submitted 26 March, 2022; originally announced March 2022.

Comments: arXiv admin note: text overlap with arXiv:2203.06670

Nucleate Boiling Simulation using Interface Tracking Method

Authors: Mengnan Li, Joachim Moortgat, Igor A. Bolotnov

Abstract: The development and validation of 3D multiphase computational fluid dynamics (M-CFD) models and physics-informed data-driven modeling require data of high-quality and high-resolution. Considering the difficulties in acquiring the corresponding experimental data in prototypical conditions, two-phase boiling simulations by Interface Tracking Method (ITM) based models can be used to generate high-res… ▽ More The development and validation of 3D multiphase computational fluid dynamics (M-CFD) models and physics-informed data-driven modeling require data of high-quality and high-resolution. Considering the difficulties in acquiring the corresponding experimental data in prototypical conditions, two-phase boiling simulations by Interface Tracking Method (ITM) based models can be used to generate high-resolution numerical data in a consistent and relatively economical manner. A boiling model is developed in one of the ITM-based multiphase-flow solvers, named PHASTA, to investigate the nucleate boiling phenomenon. The interaction between bubbles forming at adjacent nucleation sites is investigated with this ITM boiling model. Nucleate pool boiling simulations with multiple nucleation sites are presented in this paper and influences of site distance, neighboring bubble size and contact angle effect are investigated. The presented boiling model can conduct boiling simulation on 3D unstructured computational meshes. These simulation results improve our understanding of the physical mechanisms of the nucleate boiling phenomenon and provide high-resolution numerical data for M-CFD validation and advanced boiling model development. △ Less

Submitted 28 August, 2020; originally announced August 2020.

Comments: This paper has been accepted by Nuclear Engineering and Design

Coarse-Grid Computational Fluid Dynamic (CG-CFD) Error Prediction using Machine Learning

Authors: Botros N Hanna, Nam T. Dinh, Robert W. Youngblood, Igor A. Bolotnov

Abstract: Despite the progress in high performance computing, Computational Fluid Dynamics (CFD) simulations are still computationally expensive for many practical engineering applications such as simulating large computational domains and highly turbulent flows. One of the major reasons of the high expense of CFD is the need for a fine grid to resolve phenomena at the relevant scale, and obtain a grid-inde… ▽ More Despite the progress in high performance computing, Computational Fluid Dynamics (CFD) simulations are still computationally expensive for many practical engineering applications such as simulating large computational domains and highly turbulent flows. One of the major reasons of the high expense of CFD is the need for a fine grid to resolve phenomena at the relevant scale, and obtain a grid-independent solution. The fine grid requirements often drive the computational time step size down, which makes long transient problems prohibitively expensive. In the research presented, the feasibility of a Coarse Grid CFD (CG-CFD) approach is investigated by utilizing Machine Learning (ML) algorithms. Relying on coarse grids increases the discretization error. Hence, a method is suggested to produce a surrogate model that predicts the CG-CFD local errors to correct the variables of interest. Given high-fidelity data, a surrogate model is trained to predict the CG-CFD local errors as a function of the coarse grid local features. ML regression algorithms are utilized to construct a surrogate model that relates the local error and the coarse grid features. This method is applied to a three-dimensional flow in a lid driven cubic cavity domain. The performance of the method was assessed by training the surrogate model on the flow full field spatial data and tested on new data (from flows of different Reynolds number and/or computed by different grid sizes). The proposed method maximizes the benefit of the available data and shows potential for a good predictive capability. △ Less

Submitted 25 October, 2017; originally announced October 2017.

Comments: WORKING PAPER (Submitted to Journal of Fluids Engineering, October 2017)