-
Nanometers-thick Ferromagnetic Surface Produced by Laser Cutting of Diamond
Authors:
Annette Setzer,
Pablo D. Esquinazi,
Sergei Buga,
Milena T. Georgieva,
Tilo Reinert,
Tom Venus,
Irina Estrela-Lopis,
Andrei Ivashenko,
Maria Bondarenko,
Winfried Böhlmann,
Jan Meijer
Abstract:
In this work, we demonstrate that cutting diamond crystals with a laser (532~nm wavelength, 0.5~mJ energy, 200~ns pulse duration at 15~kHz) produces a $\lesssim 20~$nm thick surface layer with magnetic order at room temperature. We have measured the magnetic moment of five natural and six CVD diamond crystals of different size, nitrogen content and surface orientations with a SQUID magnetometer. A…
▽ More
In this work, we demonstrate that cutting diamond crystals with a laser (532~nm wavelength, 0.5~mJ energy, 200~ns pulse duration at 15~kHz) produces a $\lesssim 20~$nm thick surface layer with magnetic order at room temperature. We have measured the magnetic moment of five natural and six CVD diamond crystals of different size, nitrogen content and surface orientations with a SQUID magnetometer. A robust ferromagnetic response at 300~K is observed only for crystals that were cut with the laser along the (100) surface orientation. The magnetic signals are much weaker for the (110) and negligible for the (111) orientations. We attribute the magnetic order to the disordered graphite layer produced by the laser at the diamond surface. The ferromagnetic signal vanished after chemical etching or after moderate temperature annealing. The obtained results indicate that laser treatment of diamond may pave the way to create ferromagnetic spots at its surface.
△ Less
Submitted 25 January, 2022; v1 submitted 7 December, 2021;
originally announced December 2021.
-
Magnetization of Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8+δ}$ micrometer thin ring and its depinning line
Authors:
B. Semenenko,
B. C. Camargo,
A. Setzer,
W. Bohlmann,
Y. Kopelevich,
P. D. Esquinazi
Abstract:
We demonstrate a geometrical effect on the depinning line (DL) of the flux line lattice of the Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8+δ}$ high-T$_c$ superconductor (HTSC) micrometer ring. The DL shifts to notably lower temperatures in comparison to bulk crystals and thin flakes of the same sample. The shift is attributed to a decrease in the overall pinning potential due to a double size effect, namely:…
▽ More
We demonstrate a geometrical effect on the depinning line (DL) of the flux line lattice of the Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8+δ}$ high-T$_c$ superconductor (HTSC) micrometer ring. The DL shifts to notably lower temperatures in comparison to bulk crystals and thin flakes of the same sample. The shift is attributed to a decrease in the overall pinning potential due to a double size effect, namely: a) the ring thickness $\sim 1~μ$m being smaller than the pinning correlation length, and b) the increase in the effective London penetration depth of the vortices (Pearl vortices). The large shift of the DL to lower temperatures may influence the suitability of this HTSC for applications in microstrip antennas and THz emitters.
△ Less
Submitted 3 March, 2021;
originally announced March 2021.
-
Evidence for room temperature superconductivity at graphite interfaces
Authors:
Pablo D. Esquinazi,
Christian E. Precker,
Markus Stiller,
Tiago R. S. Cordeiro,
Jose Barzola-Quiquia,
Annette Setzer,
Winfried Böhlmann
Abstract:
In the last 43 years several hints were reported suggesting the existence of granular superconductivity above room temperature in different graphite-based systems. In this paper some of the results are reviewed, giving special attention to those obtained in water and n-heptane treated graphite powders, commercial and natural bulk graphite samples with different characteristics as well as transmiss…
▽ More
In the last 43 years several hints were reported suggesting the existence of granular superconductivity above room temperature in different graphite-based systems. In this paper some of the results are reviewed, giving special attention to those obtained in water and n-heptane treated graphite powders, commercial and natural bulk graphite samples with different characteristics as well as transmission electron microscope (TEM) lamellae. The overall results indicate that superconducting regions exist and are localized at certain internal interfaces of the graphite structure. The existence of the rhombohedral graphite phase in all samples with superconducting-like properties suggests its interfaces with the Bernal phase as a possible origin for the high-temperature superconductivity, as theoretical calculations predict. High precision electrical resistance and magnetization measurements were used to identify a transition at $T_c \gtrsim 350~$K. To check for the existence of true zero resistance paths in the samples we used local magnetic measurements, which results support the existence of superconducting regions at such high temperatures.
△ Less
Submitted 1 September, 2017;
originally announced September 2017.
-
Identification of a possible superconducting transition above room temperature in natural graphite crystals
Authors:
Christian E. Precker,
Pablo D. Esquinazi,
Ana Champi,
José Barzola-Quiquia,
Mahsa Zoraghi,
Santiago Muiños-Landin,
Annette Setzer,
Winfried Böhlmann,
Daniel Spemann,
Jan Meijer,
Tom Muenster,
Oliver Baehre,
Gert Kloess,
Henning Beth
Abstract:
Measuring with high precision the electrical resistance of highly ordered natural graphite samples from a Brazil mine, we have identified a transition at $\sim$350~K with $\sim$40~K transition width. The step-like change in temperature of the resistance, its magnetic irreversibility and time dependence after a field change, consistent with trapped flux and flux creep, and the partial magnetic flux…
▽ More
Measuring with high precision the electrical resistance of highly ordered natural graphite samples from a Brazil mine, we have identified a transition at $\sim$350~K with $\sim$40~K transition width. The step-like change in temperature of the resistance, its magnetic irreversibility and time dependence after a field change, consistent with trapped flux and flux creep, and the partial magnetic flux expulsion obtained by magnetization measurements, suggest the existence of granular superconductivity below 350~K. The zero-field virgin state can only be reached again after zero field cooling the sample from above the transition. Paradoxically, the extraordinarily high transition temperature we found for this and several other graphite samples is the reason why this transition remained undetected so far. The existence of well ordered rhombohedral graphite phase in all measured samples has been proved by x-rays diffraction measurements, suggesting its interfaces with the Bernal phase as a possible origin for the high-temperature superconductivity, as theoretical studies predicted. The localization of granular superconductivity at these two dimensional interfaces prevents the observation of a zero resistance state or of a full Meissner state.
△ Less
Submitted 30 June, 2016;
originally announced June 2016.
-
Granular superconductivity below 5~K in SPI-II pyrolytic graphite
Authors:
Ana Ballestar,
Pablo Esquinazi,
Winfried Böhlmann
Abstract:
We have studied the transport properties of transmission electron microscope (TEM) lamellae obtained from a pyrolytic graphite sample of grade B (SPI-II) with electrical contacts at the edges of the graphene layers. The temperature, magnetic field, input current dependence of the resistance as well as the current-voltage characteristic curves are compatible with the existence of granular supercond…
▽ More
We have studied the transport properties of transmission electron microscope (TEM) lamellae obtained from a pyrolytic graphite sample of grade B (SPI-II) with electrical contacts at the edges of the graphene layers. The temperature, magnetic field, input current dependence of the resistance as well as the current-voltage characteristic curves are compatible with the existence of granular superconductivity below 5~K. TEM pictures of the studied lamellae reveal clear differences of the embedded interfaces to those existing in more ordered pyrolytic samples, which appear to be the origin for the relatively lower temperatures at which the granular superconductivity is observed.
△ Less
Submitted 30 December, 2014;
originally announced December 2014.
-
Trace element content and magnetic properties of commercial HOPG samples studied by ion beam microscopy and SQUID magnetometry
Authors:
D. Spemann,
P. Esquinazi,
A. Setzer,
W. Böhlmann
Abstract:
In this study, the impurity concentration and magnetic response of nine highly oriented pyrolytic graphite (HOPG) samples with different grades and from different providers were determined using ion beam microscopy and SQUID magnetometry. Apart from sideface contaminations in the as-received state, bulk contamination of the samples in most cases consists of disk-shaped micron-sized particles made…
▽ More
In this study, the impurity concentration and magnetic response of nine highly oriented pyrolytic graphite (HOPG) samples with different grades and from different providers were determined using ion beam microscopy and SQUID magnetometry. Apart from sideface contaminations in the as-received state, bulk contamination of the samples in most cases consists of disk-shaped micron-sized particles made of Ti and V with an additional Fe contamination around the grain perimeter. The saturation magnetization typically increases with Fe concentration, however, there is no simple correlation between Fe content and magnetic moment. The saturation magnetization of one, respectively six, out of nine samples clearly exceeds the maximum contribution from pure Fe or Fe3C. For most samples the temperature dependence of the remanence decreases linearly with T - a dependence found previously for defect-induced magnetism (DIM) in HOPG. We conclude that apart from magnetic impurities, additional contribution to the ferromagnetic magnetization exists in pristine HOPG in agreement with previous studies. A comparative study between the results of ion beam microscopy and the commonly used EDX analysis shows clearly that EDX is not a reliable method for quantitative trace elemental analysis in graphite, clarifying weaknesses and discrepancies in the element concentrations given in the recent literature.
△ Less
Submitted 19 June, 2014; v1 submitted 11 October, 2013;
originally announced October 2013.
-
Granular superconductivity at room temperature in bulk highly oriented pyrolytic graphite samples
Authors:
T. Scheike,
P. Esquinazi,
A. Setzer,
W. Böhlmann
Abstract:
We have studied the magnetic response of two bulk highly oriented pyrolytic graphite (HOPG) samples with different internal microstructure. For the sample with well defined interfaces, parallel to the graphene layers, the temperature and magnetic field hysteresis are similar to those found recently in water-treated graphite powders. The observed behavior indicates the existence of granular superco…
▽ More
We have studied the magnetic response of two bulk highly oriented pyrolytic graphite (HOPG) samples with different internal microstructure. For the sample with well defined interfaces, parallel to the graphene layers, the temperature and magnetic field hysteresis are similar to those found recently in water-treated graphite powders. The observed behavior indicates the existence of granular superconductivity above room temperature in agreement with previous reports in other graphite samples. The granular superconductivity behavior is observed only for fields normal to the embedded interfaces, whereas no relevant hysteresis in temperature or field is observed for fields applied parallel to them. Increasing the temperature above $\sim 400$ K changes irreversibly the hysteretic response of the sample.
△ Less
Submitted 18 January, 2013;
originally announced January 2013.
-
Can do** graphite trigger room temperature superconductivity? Evidence for granular high-temperature superconductivity in water-treated graphite powder
Authors:
T. Scheike,
W. Böhlmann,
P. Esquinazi,
J. Barzola-Quiquia,
A. Ballestar,
A. Setzer
Abstract:
Trying to dope graphite flakes we found that the magnetization of pure, several tens of micrometers grain size graphite powder and after a simple treatment with pure water shows clear and reproducible granular superconducting behavior with a critical temperature above 300K. The observed magnetic characteristics as a function of temperature, magnetic field and time, provide evidence for weakly coup…
▽ More
Trying to dope graphite flakes we found that the magnetization of pure, several tens of micrometers grain size graphite powder and after a simple treatment with pure water shows clear and reproducible granular superconducting behavior with a critical temperature above 300K. The observed magnetic characteristics as a function of temperature, magnetic field and time, provide evidence for weakly coupled grains through Josephson interaction, revealing the existence of superconducting vortices.
△ Less
Submitted 10 September, 2012;
originally announced September 2012.
-
Large local Hall effect in pin-hole dominated multigraphene spin-valves
Authors:
P. K. Muduli,
J. Barzola-Quiquia,
S. Dusari,
Ana Ballestar,
F. Bern,
W. Bohlmann,
P. Esquinazi
Abstract:
We report local and non-local measurements in pin-hole dominated mesoscopic multigraphene spin-valves. Local spin-valve measurements show spurious switching behavior in resistance during magnetic field swee** similar to the signal observed due to spin-injection into multigraphene. The switching behavior has been explained in terms of local Hall effect due to thickness irregularity of the tunnel…
▽ More
We report local and non-local measurements in pin-hole dominated mesoscopic multigraphene spin-valves. Local spin-valve measurements show spurious switching behavior in resistance during magnetic field swee** similar to the signal observed due to spin-injection into multigraphene. The switching behavior has been explained in terms of local Hall effect due to thickness irregularity of the tunnel barrier. Local Hall effect appears due to large local magnetostatic field produced at the roughness in the AlO$_x$ tunnel barrier. The effect of this local Hall effect is found to reduce as temperature is increased above 75 K. The strong local Hall effect hinders spin-injection into multigraphene resulting in no spin signal in non-local measurements.
△ Less
Submitted 23 July, 2012; v1 submitted 10 November, 2011;
originally announced November 2011.
-
Enhancement of the ferromagnetic order of graphite after sulphuric acid treatment
Authors:
J. Barzola-Quiquia,
W. Böhlmann,
P. Esquinazi,
A. Schadewitz,
A. Ballestar,
S. Dusari,
L. Schultze-Nobre,
B. Kersting
Abstract:
We have studied the changes in the ferromagnetic behavior of graphite powder and graphite flakes after treatment with diluted sulphuric acid. We show that this kind of acid treatment enhances substantially the ferromagnetic magnetization of virgin graphite micrometer size powder as well as in graphite flakes. The anisotropic magnetoresistance (AMR) amplitude at 300 K measured in a micrometer size…
▽ More
We have studied the changes in the ferromagnetic behavior of graphite powder and graphite flakes after treatment with diluted sulphuric acid. We show that this kind of acid treatment enhances substantially the ferromagnetic magnetization of virgin graphite micrometer size powder as well as in graphite flakes. The anisotropic magnetoresistance (AMR) amplitude at 300 K measured in a micrometer size thin graphite flake after acid treatment reaches values comparable to polycrystalline cobalt.
△ Less
Submitted 5 April, 2011;
originally announced April 2011.
