-
Planet Formation by Gas-Assisted Accretion of Small Solids
Authors:
Gennaro D'Angelo,
Peter Bodenheimer
Abstract:
We compute the accretion efficiency of small solids, with radii 1 cm $\le$ Rs $\le$ 10 m, on planets embedded in gaseous disks. Planets have masses 3 $\le$ Mp $\le$ 20 Earth masses (Me) and orbit within 10 AU of a solar-mass star. Disk thermodynamics is modeled via three-dimensional radiation-hydrodynamic calculations that typically resolve the planetary envelopes. Both icy and rocky solids are co…
▽ More
We compute the accretion efficiency of small solids, with radii 1 cm $\le$ Rs $\le$ 10 m, on planets embedded in gaseous disks. Planets have masses 3 $\le$ Mp $\le$ 20 Earth masses (Me) and orbit within 10 AU of a solar-mass star. Disk thermodynamics is modeled via three-dimensional radiation-hydrodynamic calculations that typically resolve the planetary envelopes. Both icy and rocky solids are considered, explicitly modeling their thermodynamic evolution. The maximum efficiencies of 1 $\le$ Rs $\le$ 100 cm particles are generally $\lesssim$ 10%, whereas 10 m solids tend to accrete efficiently or be segregated beyond the planet's orbit. A simplified approach is applied to compute the accretion efficiency of small cores, with masses Mp $\le$ 1 Me and without envelopes, for which efficiencies are approximately proportional to Mp^(2/3). The mass flux of solids, estimated from unperturbed drag-induced drift velocities, provides typical accretion rates dMp/dt $\lesssim$ 1e-5 Mearth/yr. In representative disk models with an initial gas-to-dust mass ratio of 70-100 and total mass of 0.05-0.06 Msun, solids' accretion falls below 1e-6 Mearth/yr after 1-1.5 million years (Myr). The derived accretion rates, as functions of time and planet mass, are applied to formation calculations that compute dust opacity self-consistently with the delivery of solids to the envelope. Assuming dust-to-solid coagulation times of approximately 0.3 Myr and disk lifetimes of approximately 3.5 Myr, heavy-element inventories in the range 3-7 Me require that approximately 90-150 Me of solids cross the planet's orbit. The formation calculations encompass a variety of outcomes, from planets a few times the Earth mass, predominantly composed of heavy elements, to giant planets. The peak luminosities during the epoch of solids' accretion range from $\approx$ 1e-7 to $\approx$ 1e-6 times the solar luminosity.
△ Less
Submitted 4 June, 2024; v1 submitted 8 April, 2024;
originally announced April 2024.
-
Uranus and Neptune as methane planets: producing icy giants from refractory planetesimals
Authors:
Uri Malamud,
Morris Podolak,
Joshua Podolak,
Peter Bodenheimer
Abstract:
Uranus and Neptune are commonly considered ice giants, and it is often assumed that, in addition to a solar mix of hydrogen and helium, they contain roughly twice as much water as rock. This classical picture has led to successful models of their internal structure and has been understood to be compatible with the composition of the solar nebula during their formation (Reynolds and Summers 1965; P…
▽ More
Uranus and Neptune are commonly considered ice giants, and it is often assumed that, in addition to a solar mix of hydrogen and helium, they contain roughly twice as much water as rock. This classical picture has led to successful models of their internal structure and has been understood to be compatible with the composition of the solar nebula during their formation (Reynolds and Summers 1965; Podolak and Cameron 1974; Podolak and Reynolds 1984; Podolak et al. 1995; Nettelmann et al. 2013). However, the dominance of water has been recently questioned (Teanby et al. 2020; Helled and Fortney 2020; Podolak et al. 2022). Planetesimals in the outer solar system are composed mainly of refractory materials, leading to an inconsistency between the icy composition of Uranus and Neptune and the ice-poor planetesimals they accreted during formation (Podolak et al. 2022). Here we elaborate on this problem, and propose a new potential solution. We show that chemical reactions between planetesimals dominated by organic-rich refractory materials and the hydrogen in gaseous atmospheres of protoplanets can form large amounts of methane 'ice'. Uranus and Neptune could thus be compatible with having accreted refractory-dominated planetesimals, while still remaining icy. Using random statistical computer models for a wide parameter space, we show that the resulting methane-rich internal composition could be a natural solution, giving a good match to the size, mass and moment of inertia of Uranus and Neptune, whereas rock-rich models appear to only work if a rocky interior is heavily mixed with hydrogen. Our model predicts a lower than solar hydrogen to helium ratio, which can be tested. We conclude that Uranus, Neptune and similar exoplanets could be methane-rich, and discuss why Jupiter and Saturn cannot.
△ Less
Submitted 10 July, 2024; v1 submitted 19 March, 2024;
originally announced March 2024.
-
Mixing of Condensable Constituents with H-He During the Formation & Evolution of Jupiter
Authors:
David Stevenson,
Peter Bodenheimer,
Jack J. Lissauer,
Gennaro D'Angelo
Abstract:
Simulations of Jupiter's formation are presented that incorporate mixing of H-He with denser material entering the planet as solids. Heavy compounds and gas mix substantially when the planet becomes roughly as massive as Earth, because incoming planetesimals can fully vaporize. Supersaturation of vaporized silicates causes the excess to sink as droplets, but water remains at higher altitudes. Beca…
▽ More
Simulations of Jupiter's formation are presented that incorporate mixing of H-He with denser material entering the planet as solids. Heavy compounds and gas mix substantially when the planet becomes roughly as massive as Earth, because incoming planetesimals can fully vaporize. Supersaturation of vaporized silicates causes the excess to sink as droplets, but water remains at higher altitudes. Because the mean molecular weight decreases rapidly outward, some of the compositional inhomogeneities produced during formation can survive for billions of years. After 4.57 Gyr, our Jupiter model retains compositional gradients; proceeding outwards one finds: i) an inner heavy-element core, the outer part derived from hot supersaturated rain-out; ii) a composition-gradient region, containing most of the heavy elements, where H-He abundance increases outward, reaching about 0.9 mass fraction at 0.3 of the radius, with silicates enhanced relative to water in the lower parts and depleted in the upper parts; iii) a uniform composition region (neglecting He immiscibility) that is enriched over protosolar and contains most of the planet's mass; and iv) an outer region where cloud formation (condensation) of heavy constituents occurs. This radial compositional profile has heavy elements more broadly distributed than predicted by classical formation models, but less diluted than suggested by Juno-constrained gravity models. The compositional gradients in the region containing the bulk of the heavy elements prevent convection, in both our models and those fitting current gravity, resulting in a hot interior where much of the accretion energy remains trapped.
△ Less
Submitted 29 March, 2022; v1 submitted 18 February, 2022;
originally announced February 2022.
-
Models of the in situ formation of detected extrasolar giant planets
Authors:
Peter Bodenheimer,
Olenka Hubickyj,
Jack J. Lissauer
Abstract:
(Abridged) We present numerical simulations of the formation of the planetary companions to 47 UMa, rho CrB, and 51 Peg. They are assumed to have formed in situ according to the basic model that a core formed first by accretion of solid particles, then later it captured substantial amounts of gas from the protoplanetary disk. In most of the calculations we prescribe a constant accretion rate for t…
▽ More
(Abridged) We present numerical simulations of the formation of the planetary companions to 47 UMa, rho CrB, and 51 Peg. They are assumed to have formed in situ according to the basic model that a core formed first by accretion of solid particles, then later it captured substantial amounts of gas from the protoplanetary disk. In most of the calculations we prescribe a constant accretion rate for the solid core. The evolution of the gaseous envelope assumes that: (1) it is in quasi-hydrostatic equilibrium, (2) the gas accretion rate is determined by the requirement that the outer radius of the planet is the place at which the thermal velocity of the gas allows it to reach the boundary of the planet's Hill sphere, (3) the gas accretion rate is limited, moreover, by the prescribed maximum rate at which the nebula can supply the gas, and (4) the growth of the planet stops once it obtains approximately the minimum mass determined from radial velocity measurements. Calculations are carried out through an initial phase during which solid accretion dominates, past the point of crossover when the masses of solid and gaseous material are equal, through the phase of rapid gas accretion, and into the final phase of contraction and cooling at constant mass. Alternative calculations are presented for the case of 47 UMa in which the solid accretion rate is calculated, not assumed, and the dissolution of planetesimals within the gaseous envelope is considered. In all cases there is a short phase of high luminosity (1e-3-1e-2 Lsun) associated with rapid gas accretion. The height and duration of this peak depend on uncertain model parameters. The conclusion is reached that in situ formation of all of these companions is possible under some conditions. However, it is more likely that orbital migration was an important component of the evolution, at least for the planets around rho CrB and 51 Peg.
△ Less
Submitted 9 November, 2021;
originally announced November 2021.
-
Growth of Jupiter: Formation in Disks of Gas and Solids and Evolution to the Present Epoch
Authors:
Gennaro D'Angelo,
Stuart J. Weidenschilling,
Jack J. Lissauer,
Peter Bodenheimer
Abstract:
[Abridged] The formation of Jupiter is modeled via core-nucleated accretion, and the planet's evolution is simulated up to the present epoch. The growth from a small embryo until gas accretion overtakes solids' accretion was presented by D'Angelo et al. (Icarus 2014, 241, 298). Those calculations followed the formation for $4\times 10^{5}$ years, until the heavy-element and H/He masses were…
▽ More
[Abridged] The formation of Jupiter is modeled via core-nucleated accretion, and the planet's evolution is simulated up to the present epoch. The growth from a small embryo until gas accretion overtakes solids' accretion was presented by D'Angelo et al. (Icarus 2014, 241, 298). Those calculations followed the formation for $4\times 10^{5}$ years, until the heavy-element and H/He masses were $M_{Z}\approx 7.3$ and $M_{XY}\approx 0.15$ Earth's masses ($M_{\oplus}$), respectively, and $dM_{XY}/dt\approx dM_{Z}/dt$. The calculation is continued through the phase when $M_{XY}=M_{Z}$, at which age, about $2.4\times 10^{6}$ years, the planet mass is $M_{p}\approx 20\,M_{\oplus}$. About $9\times 10^{5}$ years later, $M_{p}$ is approximately $60\,M_{\oplus}$ and $M_{Z}\approx 16\,M_{\oplus}$. Around this epoch, the contraction of the envelope dictates gas accretion rates a few times $10^{-3}\,M_{\oplus}$ per year, initiating the regime of disk-limited accretion, when the planet's evolution is tied to disk's evolution. Growth is continued by constructing simplified models of accretion disks that evolve through viscous diffusion, winds, and accretion on the planet. Jupiter's formation ends after $\approx 3.4$-$4.2$ Myr, when nebula gas disperses. The young Jupiter is $4.5$-$5.5$ times as voluminous as it is presently and thousands of times as luminous, $\sim 10^{-5}\,L_{\odot}$. The heavy-element mass is $\approx 20\,M_{\oplus}$. The evolution proceeds through the cooling and contraction phase, in isolation except for solar irradiation. After $4570$ Myr, radius and luminosity of the planet are within $10$% of current values. During formation, and soon thereafter, the planet exhibits features, e.g., luminosity and effective temperature, that may probe aspects of the latter stages of formation, if observable. These possibly distinctive features, however, seem to disappear within a few tens of Myr.
△ Less
Submitted 14 October, 2020; v1 submitted 10 September, 2020;
originally announced September 2020.
-
Detailed Calculations of the Efficiency of Planetesimal Accretion in the Core-Accretion Model
Authors:
Morris Podolak,
Nader Haghighipour,
Peter Bodenheimer,
Ravit Helled,
Esther Podolak
Abstract:
We present results of a detailed study of the rate of the accretion of planetesimals by a growing proto-Jupiter in the core-accretion model. Using a newly developed code, we accurately combine a detailed three-body trajectory calculation with gas drag experienced during the passage of planetesimals in the protoplanet's envelope. We find that the motion of planetesimals is excited to the extent tha…
▽ More
We present results of a detailed study of the rate of the accretion of planetesimals by a growing proto-Jupiter in the core-accretion model. Using a newly developed code, we accurately combine a detailed three-body trajectory calculation with gas drag experienced during the passage of planetesimals in the protoplanet's envelope. We find that the motion of planetesimals is excited to the extent that encounters with the proto-planetary envelope become so fast that ram pressure breaks up the planetesimals in most encounters. As a result, the accretion rate is largely independent of the planetesimal size and composition. For the case we explored of a planet forming at 5.2 AU from the Sun in a disk with a solid surface density of 6 g/cm^2 (Lozovsky et al. 2017) the accretion rate we compute differs in several respects from that assumed by those authors. We find that only 4-5 M_Earth is accreted in the first 1.5x10^6 years before the onset of rapid gas accretion. Most of the mass, some 10 M_Earth, is accreted simultaneously with this rapid gas accretion. In addition, we find that the mass accretion rate remains small, but non-zero for at least a million years after this point, and an additional 0.3-0.4 M_Earth is accreted during that time. This late accretion, together with a rapid infall of gas could lead to the accreted material being mixed throughout the outer regions, and may account for the enhancement of high-Z material in Jupiter's envelope.
△ Less
Submitted 21 June, 2020; v1 submitted 29 November, 2019;
originally announced November 2019.
-
New Formation Models for the Kepler-36 System
Authors:
Peter Bodenheimer,
David J. Stevenson,
Jack J. Lissauer,
Gennaro D'Angelo
Abstract:
Formation of the planets in the Kepler-36 system is modeled by detailed numerical simulations according to the core-nucleated accretion scenario. The standard model is updated to include the dissolution of accreting rocky planetesimals in the gaseous envelope of the planet, leading to substantial enrichment of the envelope mass in heavy elements and a non-uniform composition with depth. For Kepler…
▽ More
Formation of the planets in the Kepler-36 system is modeled by detailed numerical simulations according to the core-nucleated accretion scenario. The standard model is updated to include the dissolution of accreting rocky planetesimals in the gaseous envelope of the planet, leading to substantial enrichment of the envelope mass in heavy elements and a non-uniform composition with depth. For Kepler-36 c, models involving in situ formation and models involving orbital migration are considered. The results are compared with standard formation models. The calculations include the formation (accretion) phase, as well as the subsequent cooling phase, up to the age of Kepler-36 (7 Gyr). During the latter phase, mass loss induced by stellar XUV radiation is included. In all cases, the results fit the measured mass, 7.84 M$_\oplus$, and radius, 3.68 R$_\oplus$, of Kepler-36 c. Two parameters are varied to obtain these fits: the disk solid surface density at the formation location, and the "efficiency" factor in the XUV mass loss rate. The updated models are hotter and therefore less dense in the silicate portion of the planet and in the overlying layers of H/He, as compared with standard models. The lower densities mean that only about half as much H/He is needed to be accreted to fit the present-day mass and radius constraints. For Kepler-36 b, an updated in situ calculation shows that the entire H/He envelope is lost, early in the cooling phase, in agreement with observation.
△ Less
Submitted 16 October, 2018;
originally announced October 2018.
-
Jupiter's formation and its primordial internal structure
Authors:
Michael Lozovsky,
Ravit Helled,
Eric D. Rosenberg,
Peter Bodenheimer
Abstract:
The composition of Jupiter and the primordial distribution of the heavy elements are determined by its formation history. As a result, in order to constrain the primordial internal structure of Jupiter the growth of the core and the deposition and settling of accreted planetesimals must be followed in detail. In this paper we determine the distribution of the heavy elements in proto-Jupiter and de…
▽ More
The composition of Jupiter and the primordial distribution of the heavy elements are determined by its formation history. As a result, in order to constrain the primordial internal structure of Jupiter the growth of the core and the deposition and settling of accreted planetesimals must be followed in detail. In this paper we determine the distribution of the heavy elements in proto-Jupiter and determine the mass and composition of the core. We find that while the outer envelope of proto-Jupiter is typically convective and has an homogeneous composition, the innermost regions have compositional gradients. In addition, the existence of heavy elements in the envelope leads to much higher internal temperatures (several times 10$^4$ K) than in the case of a hydrogen-helium envelope. The derived core mass depends on the actual definition of the core: if the core is defined as the region in which the heavy-element mass fraction is above some limit (say 0.5), then it can be much more massive ($\sim$ 15 M$_{\oplus}$) and more extended (10\% of the planet's radius) than in the case where the core is just the region with 100\% heavy elements. In the former case Jupiter's core also consists of hydrogen and helium. Our results should be taken into account when constructing internal structure models of Jupiter and when interpreting the upcoming data from the {\it Juno} (NASA) mission.
△ Less
Submitted 6 January, 2017;
originally announced January 2017.
-
In Situ and Ex Situ Formation Models of Kepler 11 Planets
Authors:
Gennaro D'Angelo,
Peter Bodenheimer
Abstract:
We present formation simulations of the six Kepler 11 planets. Models assume either in situ or ex situ assembly, the latter with migration, and are evolved to the estimated age of the system, 8 Gyr. Models combine detailed calculations of both the gaseous envelope and the condensed core structures, including accretion of gas and solids, of the disk's viscous and thermal evolution, including photo-…
▽ More
We present formation simulations of the six Kepler 11 planets. Models assume either in situ or ex situ assembly, the latter with migration, and are evolved to the estimated age of the system, 8 Gyr. Models combine detailed calculations of both the gaseous envelope and the condensed core structures, including accretion of gas and solids, of the disk's viscous and thermal evolution, including photo-evaporation and disk-planet interactions, and of the planets' evaporative mass loss after disk dispersal. Planet-planet interactions are neglected. Both sets of simulations successfully reproduce measured radii, masses, and orbital distances of the planets, except for the radius of Kepler 11b, which loses its entire gaseous envelope shortly after formation. Gaseous (H+He) envelopes account for < 18% of the planet masses, and between 35 and 60% of the planet radii. In situ models predict a very massive inner disk, whose solids' surface density (sigma_Z) varies from over 1e4 to 1e3 g/cm2 at stellocentric distances 0.1 < r < 0.5 AU. Initial gas densities would be in excess of 1e5 g/cm2 if solids formed locally. Given the high disk temperatures (> 1000 K), planetary interiors can only be composed of metals and highly refractory materials. Sequestration of hydrogen by the core and subsequent outgassing is required to account for the observed radius of Kepler 11b. Ex situ models predict a relatively low-mass disk, whose initial sigma_Z varies from 10 to 5 g/cm2 at 0.5 < r < 7 AU and whose initial gas density ranges from 1e3 to 100 g/cm2. All planetary interiors are expected to be rich in H2O, as core assembly mostly occurs exterior to the ice condensation front. Kepler 11b is expected to have a steam atmosphere, and H2O is likely mixed with H+He in the envelopes of the other planets. Results indicate that Kepler 11g may not be more massive than Kepler 11e.
△ Less
Submitted 29 August, 2016; v1 submitted 26 June, 2016;
originally announced June 2016.
-
In Situ Formation and Dynamical Evolution of Hot Jupiter Systems
Authors:
Konstantin Batygin,
Peter H. Bodenheimer,
Gregory P. Laughlin
Abstract:
Hot Jupiters, giant extrasolar planets with orbital periods shorter than ~10 days, have long been thought to form at large radial distances, only to subsequently experience long-range inward migration. Here, we propose that in contrast with this picture, a substantial fraction of the hot Jupiter population formed in situ via the core accretion process. We show that under conditions appropriate to…
▽ More
Hot Jupiters, giant extrasolar planets with orbital periods shorter than ~10 days, have long been thought to form at large radial distances, only to subsequently experience long-range inward migration. Here, we propose that in contrast with this picture, a substantial fraction of the hot Jupiter population formed in situ via the core accretion process. We show that under conditions appropriate to the inner regions of protoplanetary disks, rapid gas accretion can be initiated by Super-Earth type planets, comprising 10-20 Earth masses of refractory composition material. An in situ formation scenario leads to testable consequences, including the expectation that hot Jupiters should frequently be accompanied by additional low-mass planets with periods shorter than ~100 days. Our calculations further demonstrate that dynamical interactions during the early stages of planetary systems' lifetimes should increase the inclinations of such companions, rendering transits rare. High-precision radial velocity monitoring provides the best prospect for their detection.
△ Less
Submitted 3 August, 2016; v1 submitted 30 November, 2015;
originally announced November 2015.
-
Accretion and Evolution of ~2.5 Earth-mass Planets with Voluminous H/He Envelopes
Authors:
Peter Bodenheimer,
Jack J. Lissauer
Abstract:
Formation of planets in the Neptune size range with low-mass, but voluminous, H_2/He gaseous envelopes is modeled by detailed numerical simulations according to the core-nucleated accretion scenario. Formation locations ranging from 0.5 to 4 AU from a star of 1 solar mass are considered. The final planets have heavy-element cores of 2.2--2.5 Earth masses and envelopes in the range 0.037--0.16 Eart…
▽ More
Formation of planets in the Neptune size range with low-mass, but voluminous, H_2/He gaseous envelopes is modeled by detailed numerical simulations according to the core-nucleated accretion scenario. Formation locations ranging from 0.5 to 4 AU from a star of 1 solar mass are considered. The final planets have heavy-element cores of 2.2--2.5 Earth masses and envelopes in the range 0.037--0.16 Earth masses. After the formation process, which lasts 2 Myr or less, the planets evolve at constant mass up to an age of several Gyr. For assumed equilibrium temperatures of 250, 500, and 1000 K, their calculated final radii are compared with those observed by the Kepler spacecraft. For the particular case of Kepler-11 f, we address the question whether it could have formed in situ or whether migration from a formation location farther out in the disk is required.
△ Less
Submitted 5 July, 2014;
originally announced July 2014.
-
Growth of Jupiter: Enhancement of Core Accretion by a Voluminous Low-Mass Envelope
Authors:
Gennaro D'Angelo,
Stuart J. Weidenschilling,
Jack J. Lissauer,
Peter Bodenheimer
Abstract:
We present calculations of the early stages of the formation of Jupiter via core nucleated accretion and gas capture. The core begins as a seed body of about 350 kilometers in radius and orbits in a swarm of planetesimals whose initial radii range from 15 meters to 50 kilometers. The evolution of the swarm accounts for growth and fragmentation, viscous and gravitational stirring, and for drag-assi…
▽ More
We present calculations of the early stages of the formation of Jupiter via core nucleated accretion and gas capture. The core begins as a seed body of about 350 kilometers in radius and orbits in a swarm of planetesimals whose initial radii range from 15 meters to 50 kilometers. The evolution of the swarm accounts for growth and fragmentation, viscous and gravitational stirring, and for drag-assisted migration and velocity dam**. During this evolution, less than 9% of the mass is in planetesimals smaller than 1 kilometer in radius; < ~25% is in planetesimals with radii between 1 and 10 kilometers; and < ~7% is in bodies with radii larger than 100 kilometers. Gas capture by the core substantially enhances the size-dependent cross-section of the planet for accretion of planetesimals. The calculation of dust opacity in the planet's envelope accounts for coagulation and sedimentation of dust particles released as planetesimals are ablated. The calculation is carried out at an orbital semi-major axis of 5.2 AU and the initial solids' surface density is 10 g/cm^2 at that distance. The results give a core mass of nearly 7.3 Earth masses (Mearth) and an envelope mass of approximately 0.15 Mearth after about 4e5 years, at which point the envelope growth rate surpasses that of the core. The same calculation without the envelope yields a core of only about 4.4 Mearth.
△ Less
Submitted 7 August, 2014; v1 submitted 28 May, 2014;
originally announced May 2014.
-
The Formation of Uranus & Neptune: Challenges and Implications For Intermediate-Mass Exoplanets
Authors:
Ravit Helled,
Peter Bodenheimer
Abstract:
In this paper we investigate the formation of Uranus and Neptune, according to the core-nucleated accretion model, considering formation locations ranging from 12 to 30 AU from the Sun, and with various disk solid-surface densities and core accretion rates. It is shown that in order to form Uranus-like and Neptune-like planets in terms of final mass and solid-to-gas ratio, very specific conditions…
▽ More
In this paper we investigate the formation of Uranus and Neptune, according to the core-nucleated accretion model, considering formation locations ranging from 12 to 30 AU from the Sun, and with various disk solid-surface densities and core accretion rates. It is shown that in order to form Uranus-like and Neptune-like planets in terms of final mass and solid-to-gas ratio, very specific conditions are required. We also show that when recently proposed high solid accretion rates are assumed, along with solid surface densities about 10 times those in the minimum-mass solar nebula, the challenge in forming Uranus and Neptune at large radial distances is no longer the formation timescale, but is rather finding agreement with the final mass and composition of these planets. In fact, these conditions are more likely to lead to gas-giant planets. Scattering of planetesimals by the forming planetary core is found to be an important effect at the larger distances. Our study emphasizes how (even slightly) different conditions in the protoplanetary disk and the birth environment of the planetary embryos can lead to the formation of very different planets in terms of final masses and compositions (solid-to-gas ratios), which naturally explains the large diversity of intermediate-mass exoplanets.
△ Less
Submitted 20 April, 2014;
originally announced April 2014.
-
Giant Planet Formation, Evolution, and Internal Structure
Authors:
Ravit Helled,
Peter Bodenheimer,
Morris Podolak,
Aaron Boley,
Farzana Meru,
Sergei Nayakshin,
Jonathan J. Fortney,
Lucio Mayer,
Yann Alibert,
Alan P. Boss
Abstract:
The large number of detected giant exoplanets offers the opportunity to improve our understanding of the formation mechanism, evolution, and interior structure of gas giant planets. The two main models for giant planet formation are core accretion and disk instability. There are substantial differences between these formation models, including formation timescale, favorable formation location, ide…
▽ More
The large number of detected giant exoplanets offers the opportunity to improve our understanding of the formation mechanism, evolution, and interior structure of gas giant planets. The two main models for giant planet formation are core accretion and disk instability. There are substantial differences between these formation models, including formation timescale, favorable formation location, ideal disk properties for planetary formation, early evolution, planetary composition, etc. First, we summarize the two models including their substantial differences, advantages, and disadvantages, and suggest how theoretical models should be connected to available (and future) data. We next summarize current knowledge of the internal structures of solar- and extrasolar- giant planets. Finally, we suggest the next steps to be taken in giant planet exploration.
△ Less
Submitted 5 November, 2013;
originally announced November 2013.
-
Three-Dimensional Radiation-Hydrodynamics Calculations of the Envelopes of Young Planets Embedded in Protoplanetary Disks
Authors:
Gennaro D'Angelo,
Peter Bodenheimer
Abstract:
We perform global three-dimensional (3D) radiation-hydrodynamics calculations of the envelopes surrounding young planetary cores of 5, 10, and 15 Earth masses, located in a protoplanetary disk at 5 and 10 AU from a solar-mass star. We apply a nested-grid technique to resolve the thermodynamics of the disk at the orbital-radius length scale and that of the envelope at the core-radius length scale.…
▽ More
We perform global three-dimensional (3D) radiation-hydrodynamics calculations of the envelopes surrounding young planetary cores of 5, 10, and 15 Earth masses, located in a protoplanetary disk at 5 and 10 AU from a solar-mass star. We apply a nested-grid technique to resolve the thermodynamics of the disk at the orbital-radius length scale and that of the envelope at the core-radius length scale. The gas is modeled as a solar mixture of molecular and atomic hydrogen, helium, and their ions. The equation of state accounts for both gas and radiation, and gas energy includes contributions from rotational and vibrational states of molecular hydrogen and from ionization of atomic species. Dust opacities are computed from first principles, applying the full Mie theory. One-dimensional (1D) calculations of planet formation are used to supplement the 3D calculations by providing energy deposition rates in the envelope due to solids accretion. We compare 1D and 3D envelopes and find that masses and gas accretion rates agree within factors of 2, and so do envelope temperatures. The trajectories of passive tracers are used to define the size of 3D envelopes, resulting in radii much smaller than the Hill radius and smaller than the Bondi radius. The moments of inertia and angular momentum of the envelopes are determined and the rotation rates are derived from the rigid-body approximation, resulting in slow bulk rotation. We find that the polar flattening is < ~0.05. The dynamics of the accretion flow is examined by tracking the motion of tracers that move into the envelope. The anisotropy of this flow is characterized in terms of both its origin and impact site at the envelope surface. Gas merges with the envelope preferentially at mid- to high latitudes.
△ Less
Submitted 6 November, 2013; v1 submitted 8 October, 2013;
originally announced October 2013.
-
Deuterium Burning in Massive Giant Planets and Low-Mass Brown Dwarfs formed by Core-Nucleated Accretion
Authors:
Peter Bodenheimer,
Gennaro D'Angelo,
Jack J. Lissauer,
Jonathan J. Fortney,
Didier Saumon
Abstract:
Formation of bodies near the deuterium-burning limit is considered by detailed numerical simulations according to the core-nucleated giant planet accretion scenario. The objects, with heavy-element cores in the range 5-30 Mearth, are assumed to accrete gas up to final masses of 10-15 Jupiter masses (Mjup). After the formation process, which lasts 1-5 Myr and which ends with a 'cold-start', low-ent…
▽ More
Formation of bodies near the deuterium-burning limit is considered by detailed numerical simulations according to the core-nucleated giant planet accretion scenario. The objects, with heavy-element cores in the range 5-30 Mearth, are assumed to accrete gas up to final masses of 10-15 Jupiter masses (Mjup). After the formation process, which lasts 1-5 Myr and which ends with a 'cold-start', low-entropy configuration, the bodies evolve at constant mass up to an age of several Gyr. Deuterium burning via proton capture is included in the calculation, and we determined the mass, M50, above which more than 50% of the initial deuterium is burned. This often-quoted borderline between giant planets and brown dwarfs is found to depend only slightly on parameters, such as core mass, stellar mass, formation location, solid surface density in the protoplanetary disk, disk viscosity, and dust opacity. The values for M50 fall in the range 11.6-13.6 Mjup, in agreement with previous determinations that do not take the formation process into account. For a given opacity law during the formation process, objects with higher core masses form more quickly. The result is higher entropy in the envelope at the completion of accretion, yielding lower values of M50. For masses above M50, during the deuterium-burning phase, objects expand and increase in luminosity by 1 to 3 orders of magnitude. Evolutionary tracks in the luminosity-versus-time diagram are compared with the observed position of the companion to Beta Pictoris.
△ Less
Submitted 4 May, 2013;
originally announced May 2013.
-
Numerical Evidence for Dark Star Formation: A Comment on "Weakly Interacting Massive Particle Dark Matter and First Stars: Suppression of Fragmentation in Primordial Star Formation" by Smith et al. 2012, ApJ 761, 154
Authors:
Paolo Gondolo,
Katherine Freese,
Douglas Spolyar,
Peter Bodenheimer
Abstract:
(abridged) This comment is intended to show that simulations by Smith et al. (S12) support the Dark Star (DS) scenario and even remove some potential obstacles. Our previous work illustrated that the initial hydrogen densities of the first equilibrium DSs are high, ~10^{17}/cm^3 for the case of 100 GeV WIMPs, with a stellar radius of ~2-3 AU. Subsequent authors have somehow missed the fact that eq…
▽ More
(abridged) This comment is intended to show that simulations by Smith et al. (S12) support the Dark Star (DS) scenario and even remove some potential obstacles. Our previous work illustrated that the initial hydrogen densities of the first equilibrium DSs are high, ~10^{17}/cm^3 for the case of 100 GeV WIMPs, with a stellar radius of ~2-3 AU. Subsequent authors have somehow missed the fact that equilibrium DSs have the high densities they do. S12 have numerically simulated the effect of dark matter annihilation on the contraction of a protostellar gas cloud en route to forming the first stars. They show results at a density ~5 10^{14}/cm^3, slightly higher than the value at which annihilation heating prevails over cooling. However, they are apparently unable to reach the ~10^{17}/cm^3 density of our hydrostatic DS solutions. We are in complete agreement with their physical result that the gas keeps collapsing to densities > 5 10^{14}/cm^3, as it must before equilibrium DSs can form. However we are in disagreement with some of the words in their paper which imply that DSs never come to exist. It seems to us that S12 supports the DS scenario. They use the sink particle approach to treat the gas that collapses to scales smaller than their resolution limit. We argue that their sink is effectively a DS, or contains one. An accretion disk forms as more mass falls onto the sink, and the DS grows. S12 not only confirm our predictions about DS in the range where the simulations apply, but also solve a potential obstruction to DS formation by showing that dark matter annihilation prevents the fragmentation of the collapsing gas. Whereas fragmentation might perturb the dark matter away from the DS and remove its power source, instead S12 show that further sinks, if any, form only far enough away as to leave the DS undisturbed in the comfort of its dark matter surroundings.
△ Less
Submitted 27 April, 2013;
originally announced April 2013.
-
Coupled evolutions of the stellar obliquity, orbital distance, and planet's radius due to the Ohmic dissipation induced in a diamagnetic hot Jupiter around a magnetic T Tauri star
Authors:
Yu-Ling Chang,
Peter H. Bodenheimer,
Pin-Gao Gu
Abstract:
We revisit the calculation of the Ohmic dissipation in a hot Jupiter presented in Laine et al. (2008) by considering more realistic interior structures, stellar obliquity, and the resulting orbital evolution. In this simplified approach, the young hot Jupiter of one Jupiter mass is modelled as a diamagnetic sphere with a finite resistivity, orbiting across tilted stellar magnetic dipole fields in…
▽ More
We revisit the calculation of the Ohmic dissipation in a hot Jupiter presented in Laine et al. (2008) by considering more realistic interior structures, stellar obliquity, and the resulting orbital evolution. In this simplified approach, the young hot Jupiter of one Jupiter mass is modelled as a diamagnetic sphere with a finite resistivity, orbiting across tilted stellar magnetic dipole fields in vacuum. Since the induced Ohmic dissipation occurs mostly near the planet's surface, we find that the dissipation is unable to significantly expand the young hot Jupiter. Nevertheless, the planet inside a small co-rotation orbital radius can undergo orbital decay by the dissipation torque and finally overfill its Roche lobe during the T Tauri star phase. The stellar obliquity can evolve significantly if the magnetic dipole is parallel/anti-parallel to the stellar spin. Our results are validated by the general torque-dissipation relation in the presence of the stellar obliquity. We also run the fiducial model in Laine et al. (2008) and find that the planet's radius is sustained at a nearly constant value by the Ohmic heating, rather than being thermally expanded to the Roche radius as suggested by the authors.
△ Less
Submitted 7 August, 2012; v1 submitted 4 August, 2012;
originally announced August 2012.
-
Formation and Structure of Low Density Exo-Neptunes
Authors:
Leslie A. Rogers,
Peter Bodenheimer,
Jack J. Lissauer,
Sara Seager
Abstract:
Kepler has found hundreds of Neptune-size (2-6 R_Earth) planet candidates within 0.5 AU of their stars. The nature of the vast majority of these planets is not known because their masses have not been measured. Using theoretical models of planet formation, evolution and structure, we explore the range of minimum plausible masses for low-density exo-Neptunes. We focus on highly irradiated planets w…
▽ More
Kepler has found hundreds of Neptune-size (2-6 R_Earth) planet candidates within 0.5 AU of their stars. The nature of the vast majority of these planets is not known because their masses have not been measured. Using theoretical models of planet formation, evolution and structure, we explore the range of minimum plausible masses for low-density exo-Neptunes. We focus on highly irradiated planets with T_eq>=500K. We consider two separate formation pathways for low-mass planets with voluminous atmospheres of light gases: core nucleated accretion and outgassing of hydrogen from dissociated ices. We show that Neptune-size planets at T_eq=500K with masses as small as a few times that of Earth can plausibly be formed core nucleated accretion coupled with subsequent inward migration. We also derive a limiting low-density mass-radius relation for rocky planets with outgassed hydrogen envelopes but no surface water. Rocky planets with outgassed hydrogen envelopes typically have computed radii well below 3 R_Earth. For both planets with H/He envelopes from core nucleated accretion and planets with outgassed hydrogen envelopes, we employ planet interior models to map the range of planet mass--envelope mass--equilibrium temperature parameter space that is consistent with Neptune-size planet radii. Atmospheric mass loss mediates which corners of this parameter space are populated by actual planets and ultimately governs the minimum plausible mass at a specified transit radius. We find that Kepler's 2-6 R_Earth planet candidates at T_eq=500--1000K could potentially have masses less than ~4 M_Earth. Although our quantitative results depend on several assumptions, our qualitative finding that warm Neptune-size planets can have masses substantially smaller than those given by interpolating the masses and radii of planets within our Solar System is robust.
△ Less
Submitted 14 June, 2011;
originally announced June 2011.
-
Evolution of Ohmically Heated Hot Jupiters
Authors:
Konstantin Batygin,
David J. Stevenson,
Peter H. Bodenheimer
Abstract:
We present calculations of thermal evolution of Hot Jupiters with various masses and effective temperatures under Ohmic dissipation. The resulting evolutionary sequences show a clear tendency towards inflated radii for effective temperatures that give rise to significant ionization of alkali metals in the atmosphere, compatible with the trend of the data. The degree of inflation shows that Ohmic d…
▽ More
We present calculations of thermal evolution of Hot Jupiters with various masses and effective temperatures under Ohmic dissipation. The resulting evolutionary sequences show a clear tendency towards inflated radii for effective temperatures that give rise to significant ionization of alkali metals in the atmosphere, compatible with the trend of the data. The degree of inflation shows that Ohmic dissipation, along with the likely variability in heavy element content can account for all of the currently detected radius anomalies. Furthermore, we find that in absence of a massive core, low-mass hot Jupiters can over-flow their Roche-lobes and evaporate on Gyr time-scales, possibly leaving behind small rocky cores.
△ Less
Submitted 22 August, 2012; v1 submitted 19 January, 2011;
originally announced January 2011.
-
Composition of Massive Giant Planets
Authors:
Ravit Helled,
Peter Bodenheimer,
Jack J. Lissauer
Abstract:
The two current models for giant planet formation are core accretion and disk instability. We discuss the core masses and overall planetary enrichment in heavy elements predicted by the two formation models, and show that both models could lead to a large range of final compositions. For example, both can form giant planets with nearly stellar compositions. However, low-mass giant planets, enriche…
▽ More
The two current models for giant planet formation are core accretion and disk instability. We discuss the core masses and overall planetary enrichment in heavy elements predicted by the two formation models, and show that both models could lead to a large range of final compositions. For example, both can form giant planets with nearly stellar compositions. However, low-mass giant planets, enriched in heavy elements compared to their host stars, are more easily explained by the core accretion model. The final structure of the planets, i.e., the distribution of heavy elements, is not firmly constrained in either formation model.
△ Less
Submitted 20 October, 2010;
originally announced October 2010.
-
Supermassive Dark Stars: Detectable in JWST and HST
Authors:
K. Freese,
E. Ruiz,
M. Valluri,
C. Ilie,
D. Spolyar,
P. Bodenheimer
Abstract:
The first stars to form in the history of the universe may have been powered by dark matter annihilation rather than by fusion. This new phase of stellar evolution may have lasted millions to billions of years. These dark stars can grow to be very large, > 10^5 solar masses, and are relatively cool (~10^4 K). They are also very bright, being potentially detectable in the upcoming James Webb Space…
▽ More
The first stars to form in the history of the universe may have been powered by dark matter annihilation rather than by fusion. This new phase of stellar evolution may have lasted millions to billions of years. These dark stars can grow to be very large, > 10^5 solar masses, and are relatively cool (~10^4 K). They are also very bright, being potentially detectable in the upcoming James Webb Space Telescope or even the Hubble Space Telescope. Once the dark matter runs out, the dark stars have a short fusion phase, before collapsing into black holes (BH). The resulting BH could serve as seeds for the (unexplained) supermassive black holes at high redshift and at the centers of galaxies.
△ Less
Submitted 27 June, 2010;
originally announced June 2010.
-
The Effects of Metallicity, and Grain Growth and Settling on the Early Evolution of Gaseous Protoplanets
Authors:
Ravit Helled,
Peter Bodenheimer
Abstract:
Giant protoplanets formed by gravitational instability in the outer regions of circumstellar disks go through an early phase of quasi-static contraction during which radii are large and internal temperatures are low. The main source of opacity in these objects is dust grains. We investigate two problems involving the effect of opacity on the evolution of planets of 3, 5, and 7 M_J. First, we pick…
▽ More
Giant protoplanets formed by gravitational instability in the outer regions of circumstellar disks go through an early phase of quasi-static contraction during which radii are large and internal temperatures are low. The main source of opacity in these objects is dust grains. We investigate two problems involving the effect of opacity on the evolution of planets of 3, 5, and 7 M_J. First, we pick three different overall metallicities for the planet and simply scale the opacity accordingly. We show that higher metallicity results in slower contraction as a result of higher opacity. It is found that the pre-collapse time scale is proportional to the metallicity. In this scenario, survival of giant planets formed by gravitational instability is predicted to be more likely around low-metallicity stars, since they evolve to the point of collapse to small size on shorter time scales. But metal-rich planets, as a result of longer contraction times, have the best opportunity to capture planetesimals and form heavy-element cores. Second, we investigate the effects of opacity reduction as a result of grain growth and settling, for the same three planetary masses and for three different values of overall metallicity. When these processes are included, the pre-collapse time scale is found to be of order 1000 years for the three masses, significantly shorter than the time scale calculated without these effects. In this case the time scale is found to be relatively insensitive to planetary mass and composition. However, the effects of planetary rotation and accretion of gas and dust, which could increase the timescale, are not included in the calculation. The short time scale we find would preclude metal enrichment by planetesimal capture, as well as heavy-element core formation, over a large range of planetary masses and metallicities.
△ Less
Submitted 4 October, 2010; v1 submitted 21 May, 2010;
originally announced May 2010.
-
Formation of Jupiter using opacities based on detailed grain physics
Authors:
Naor Movshovitz,
Peter Bodenheimer,
Morris Podolak,
Jack J. Lissauer
Abstract:
Numerical simulations, based on the core-nucleated accretion model, are presented for the formation of Jupiter at 5.2 AU in 3 primordial disks with three different assumed values of the surface density of solid particles. The grain opacities in the envelope of the protoplanet are computed using a detailed model that includes settling and coagulation of grains and that incorporates a recalculation…
▽ More
Numerical simulations, based on the core-nucleated accretion model, are presented for the formation of Jupiter at 5.2 AU in 3 primordial disks with three different assumed values of the surface density of solid particles. The grain opacities in the envelope of the protoplanet are computed using a detailed model that includes settling and coagulation of grains and that incorporates a recalculation of the grain size distribution at each point in time and space. We generally find lower opacities than the 2% of interstellar values used in previous calculations [Hubickyj, O., Bodenheimer, P., Lissauer, J. J., 2005. Icarus 179, 415--431; Lissauer, J. J., Hubickyj, O., D'Angelo, G., Bodenheimer, P., 2009. Icarus 199, 338-350]. These lower opacities result in more rapid heat loss from and more rapid contraction of the protoplanetary envelope. For a given surface density of solids, the new calculations result in a substantial speedup in formation time as compared with those previous calculations. Formation times are calculated to be 1.0, 1.9, and 4.0 Myr, and solid core masses are found to be 16.8, 8.9, and 4.7 Earth masses, for solid surface densities, sigma, of 10, 6, and 4 grams per squared centimeter, respectively. For sigma=10 and sigma=6 g/cm^2, respectively, these formation times are reduced by more than 50% and more than 80% compared with those in a previously published calculation with the old approximation to the opacity.
△ Less
Submitted 20 May, 2010;
originally announced May 2010.
-
Gyroscopic pum** of large-scale flows in stellar interiors, and application to Lithium Dip stars
Authors:
Pascale Garaud,
Peter Bodenheimer
Abstract:
The maintenance of large-scale differential rotation in stellar convective regions by rotationally influenced convective stresses also drives large-scale meridional flows by angular--momentum conservation. This process is an example of ``gyroscopic pum**'', and has recently been studied in detail in the solar context. An important question concerns the extent to which these gyroscopically pumped…
▽ More
The maintenance of large-scale differential rotation in stellar convective regions by rotationally influenced convective stresses also drives large-scale meridional flows by angular--momentum conservation. This process is an example of ``gyroscopic pum**'', and has recently been studied in detail in the solar context. An important question concerns the extent to which these gyroscopically pumped meridional flows penetrate into nearby stably stratified (radiative) regions, since they could potentially be an important source of non-local mixing. Here we present an extensive study of the gyroscopic pum** mechanism, using a combination of analytical calculations and numerical simulations both in Cartesian geometry and in spherical geometry. The various methods, when compared with one another, provide physical insight into the process itself, as well as increasingly sophisticated means of estimating the gyroscopic pum** rate. As an example of application, we investigate the effects of this large-scale mixing process on the surface abundances of the light elements Li and Be for stars in the mass range 1.3-1.5 solar masses (so-called ``Li-dip stars''). We find that gyroscopic pum** is a very efficient mechanism for circulating material between the surface and the deep interior, so much in fact that it over-estimates Li and Be depletion by orders of magnitude for stars on the hot side of the dip.However, when the diffusion of chemical species back into the surface convection zone is taken into account, a good fit with observed surface abundances of Li and Be as a function of stellar mass in the Hyades cluster can be found for reasonable choices of model parameters.
△ Less
Submitted 10 May, 2010;
originally announced May 2010.
-
Supermassive Dark Stars: Detectable in JWST
Authors:
Katherine Freese,
Cosmin Ilie,
Douglas Spolyar,
Monica Valluri,
Peter Bodenheimer
Abstract:
The first phase of stellar evolution in the history of the Universe may be Dark Stars, powered by dark matter heating rather than by nuclear fusion. Weakly Interacting Massive Particles, which may be their own antipartners, collect inside the first stars and annihilate to produce a heat source that can power the stars for millions to billions of years. In this paper we show that these objects ca…
▽ More
The first phase of stellar evolution in the history of the Universe may be Dark Stars, powered by dark matter heating rather than by nuclear fusion. Weakly Interacting Massive Particles, which may be their own antipartners, collect inside the first stars and annihilate to produce a heat source that can power the stars for millions to billions of years. In this paper we show that these objects can grow to be supermassive dark stars (SMDS) with masses $\gtrsim (10^5-10^7) \msun$. The growth continues as long as dark matter heating persists, since dark stars are large and cool (surface temperature $\lesssim 5\times 10^4$K) and do not emit enough ionizing photons to prevent further accretion of baryons onto the star. The dark matter may be provided by two mechanisms: (1) gravitational attraction of dark matter particles on a variety of orbits not previously considered, and (2) capture of WIMPs due to elastic scattering. Once the dark matter fuel is exhausted, the SMDS becomes a heavy main sequence star; these stars eventually collapse to form massive black holes that may provide seeds for supermassive black holes in the Universe. SMDS are very bright, with luminosities exceeding $(10^9-10^{11}) L_\odot$. We demonstrate that for several reasonable parameters, these objects will be detectable with JWST. Such an observational discovery would confirm the existence of a new phase of stellar evolution powered by dark matter.
△ Less
Submitted 10 February, 2010;
originally announced February 2010.
-
Metallicity of the Massive Protoplanets Around HR 8799 If Formed by Gravitational Instability
Authors:
R. Helled,
P. Bodenheimer
Abstract:
The final composition of giant planets formed as a result of gravitational instability in the disk gas depends on their ability to capture solid material (planetesimals) during their 'pre-collapse' stage, when they are extended and cold, and contracting quasi-statically. The duration of the pre-collapse stage is inversely proportional roughly to the square of the planetary mass, so massive proto…
▽ More
The final composition of giant planets formed as a result of gravitational instability in the disk gas depends on their ability to capture solid material (planetesimals) during their 'pre-collapse' stage, when they are extended and cold, and contracting quasi-statically. The duration of the pre-collapse stage is inversely proportional roughly to the square of the planetary mass, so massive protoplanets have shorter pre-collapse timescales and therefore limited opportunity for planetesimal capture. The available accretion time for protoplanets with masses of 3, 5, 7, and 10 Jupiter masses is found to be 7.82E4, 2.62E4, 1.17E4 and 5.67E3 years, respectively. The total mass that can be captured by the protoplanets depends on the planetary mass, planetesimal size, the radial distance of the protoplanet from the parent star, and the local solid surface density. We consider three radial distances, 24, 38, and 68 AU, similar to the radial distances of the planets in the system HR 8799, and estimate the mass of heavy elements that can be accreted. We find that for the planetary masses usually adopted for the HR 8799 system, the amount of heavy elements accreted by the planets is small, leaving them with nearly stellar compositions.
△ Less
Submitted 25 November, 2009;
originally announced November 2009.
-
Tidal and Magnetic Interactions between a Hot Jupiter and its Host Star in the Magnetospheric Cavity of a Protoplanetary Disk
Authors:
Shih-Hsin Chang,
Pin-Gao Gu,
Peter Bodenheimer
Abstract:
We present a simplified model to study the orbital evolution of a young hot Jupiter inside the magnetospheric cavity of a proto-planetary disk. The model takes into account the disk locking of stellar spin as well as the tidal and magnetic interactions between the star and the planet. We focus on the orbital evolution starting from the orbit in the 2:1 resonance with the inner edge of the disk,…
▽ More
We present a simplified model to study the orbital evolution of a young hot Jupiter inside the magnetospheric cavity of a proto-planetary disk. The model takes into account the disk locking of stellar spin as well as the tidal and magnetic interactions between the star and the planet. We focus on the orbital evolution starting from the orbit in the 2:1 resonance with the inner edge of the disk, followed by the inward and then outward orbital migration driven by the tidal and magnetic torques as well as the Roche-lobe overflow of the tidally inflated planet. The goal in this paper is to study how the orbital evolution inside the magnetospheric cavity depends on the cavity size, planet mass, and orbital eccentricity. In the present work, we only target the mass range from 0.7 to 2 Jupiter masses. In the case of the large cavity corresponding to the rotational period ~ 7 days, the planet of mass >1 Jupiter mass with moderate initial eccentricities (>~ 0.3) can move to the region < 0.03 AU from its central star in 10^7 years, while the planet of mass <1 Jupiter mass cannot. We estimate the critical eccentricity beyond which the planet of a given mass will overflow its Roche radius and finally lose all of its gas onto the star due to runaway mass loss. In the case of the small cavity corresponding to the rotational period ~ 3 days, all of the simulated planets lose all of their gas even in circular orbits. Our results for the orbital evolution of young hot Jupiters may have the potential to explain the absence of low-mass giant planets inside ~ 0.03 AU from their dwarf stars revealed by transit surveys.
△ Less
Submitted 23 November, 2009;
originally announced November 2009.
-
The Formation of Uranus and Neptune in Solid-Rich Feeding Zones: Connecting Chemistry and Dynamics
Authors:
Sarah E. Dodson-Robinson,
Peter Bodenheimer
Abstract:
The core accretion theory of planet formation has at least two fundamental problems explaining the origins of Uranus and Neptune: (1) dynamical times in the trans-Saturnian solar nebula are so long that core growth can take > 15 Myr, and (2) the onset of runaway gas accretion that begins when cores reach 10 Earth masses necessitates a sudden gas accretion cutoff just as the ice giant cores reach…
▽ More
The core accretion theory of planet formation has at least two fundamental problems explaining the origins of Uranus and Neptune: (1) dynamical times in the trans-Saturnian solar nebula are so long that core growth can take > 15 Myr, and (2) the onset of runaway gas accretion that begins when cores reach 10 Earth masses necessitates a sudden gas accretion cutoff just as the ice giant cores reach critical mass. Both problems may be resolved by allowing the ice giants to migrate outward after their formation in solid-rich feeding zones with planetesimal surface densities well above the minimum-mass solar nebula. We present new simulations of the formation of Uranus and Neptune in the solid-rich disk of Dodson-Robinson et al. (2009) using the initial semimajor axis distribution of the Nice model (Gomes et al. 2005; Morbidelli et al. 2005; Tsiganis et al. 2005), with one ice giant forming at 12 AU and the other at 15 AU. The innermost ice giant reaches its present mass after 3.8-4.0 Myr and the outermost after 5.3-6 Myr, a considerable time decrease from previous one-dimensional simulations (e.g. Pollack et al. 1996). The core masses stay subcritical, eliminating the need for a sudden gas accretion cutoff. Our calculated carbon mass fractions of 22% are in excellent agreement with the ice giant interior models of Podolak et al. (1995) and Marley et al. (1995). Based on the requirement that the ice giant-forming planetesimals contain >10% mass fractions of methane ice, we can reject any solar system formation model that initially places Uranus and Neptune inside the orbit of Saturn. We also demonstrate that a large population of planetesimals must be present in both ice giant feeding zones throughout the lifetime of the gaseous nebula.
△ Less
Submitted 19 November, 2009;
originally announced November 2009.
-
Determination of the Interior Structure of Transiting Planets in Multiple-Planet Systems
Authors:
Konstantin Batygin,
Peter Bodenheimer,
Gregory Laughlin
Abstract:
Tidal dissipation within a short-period transiting extrasolar planet perturbed by a companion object can drive orbital evolution of the system to a so-called tidal fixed point, in which the apsidal lines of the transiting planet and its perturber are aligned, and for which variations in the orbital eccentricities of both planet and perturber are damped out. Significant contributions to the apsid…
▽ More
Tidal dissipation within a short-period transiting extrasolar planet perturbed by a companion object can drive orbital evolution of the system to a so-called tidal fixed point, in which the apsidal lines of the transiting planet and its perturber are aligned, and for which variations in the orbital eccentricities of both planet and perturber are damped out. Significant contributions to the apsidal precession rate are made by the secular planet-planet interaction, by general relativity, and by the gravitational quadropole fields created by the transiting planet's tidal and rotational distortions. The fixed-point orbital eccentricity of the inner planet is therefore a strong function of the planet's interior structure. We illustrate these ideas in the specific context of the recently discovered HAT-P-13 exo-planetary system, and show that one can already glean important insights into the physical properties of the inner transiting planet. We present structural models of the planet, which indicate that its observed radius can be maintained for a one-parameter sequence of models that properly vary core mass and tidal energy dissipation in the interior. We use an octopole-order secular theory of the orbital dynamics to derive the dependence of the inner planet's eccentricity, on its tidal Love number. We find that the currently measured eccentricity, implies 0.116 < k2_{b} < 0.425, 0 M_{Earth}<M_{core}<120 M_{Earth}$, and Q_{b} < 300,000. Improved measurement of the eccentricity will soon allow for far tighter limits to be placed on all three of these quantities, and will provide an unprecedented probe into the interior structure of an extrasolar planet.
△ Less
Submitted 28 July, 2009;
originally announced July 2009.
-
Dark Stars: a new look at the First Stars in the Universe
Authors:
Douglas Spolyar,
Peter Bodenheimer,
Katherine Freese,
Palo Gondolo
Abstract:
We have proposed that the first phase of stellar evolution in the history of the Universe may be Dark Stars (DS), powered by dark matter heating rather than by nuclear fusion, and in this paper we examine the history of these DS. The power source is annihilation of Weakly Interacting Massive Particles (WIMPs) which are their own antiparticles. These WIMPs are the best motivated dark matter (DM)…
▽ More
We have proposed that the first phase of stellar evolution in the history of the Universe may be Dark Stars (DS), powered by dark matter heating rather than by nuclear fusion, and in this paper we examine the history of these DS. The power source is annihilation of Weakly Interacting Massive Particles (WIMPs) which are their own antiparticles. These WIMPs are the best motivated dark matter (DM) candidates and may be discovered by ongoing direct or indirect detection searches (e.g. FERMI /GLAST) or at the Large Hadron Collider at CERN. A new stellar phase results, powered by DM annihilation as long as there is DM fuel, from millions to billions of years. We build up the dark stars from the time DM heating becomes the dominant power source, accreting more and more matter onto them. We have included many new effects in the current study, including a variety of particle masses and accretion rates, nuclear burning, feedback mechanisms, and possible repopulation of DM density due to capture. Remarkably, we find that in all these cases, we obtain the same result: the first stars are very large, 500-1000 times as massive as the Sun; as well as puffy (radii 1-10 A.U.), bright ($10^6-10^7 L_\odot$), and cool ($T_{surf} < $10,000 K) during the accretion. These results differ markedly from the standard picture in the absence of DM heating. Hence DS should be observationally distinct from standard Pop III stars. In addition, DS avoid the (unobserved) element enrichment produced by the standard first stars. Once the dark matter fuel is exhausted, the DS becomes a heavy main sequence star; these stars eventually collapse to form massive black holes that may provide seeds for the supermassive black holes and intermediate black holes, and explain ARCADE data.
△ Less
Submitted 18 March, 2009;
originally announced March 2009.
-
Dark Stars: A New Study of the FIrst Stars in the Universe
Authors:
Katherine Freese,
Douglas Spolyar,
Peter Bodenheimer,
Paolo Gondolo
Abstract:
We have proposed that the first phase of stellar evolution in the history of the Universe may be Dark Stars (DS), powered by dark matter heating rather than by nuclear fusion. Weakly Interacting Massive Particles, which may be their own antipartners, collect inside the first stars and annihilate to produce a heat source that can power the stars. A new stellar phase results, a Dark Star, powered…
▽ More
We have proposed that the first phase of stellar evolution in the history of the Universe may be Dark Stars (DS), powered by dark matter heating rather than by nuclear fusion. Weakly Interacting Massive Particles, which may be their own antipartners, collect inside the first stars and annihilate to produce a heat source that can power the stars. A new stellar phase results, a Dark Star, powered by dark matter annihilation as long as there is dark matter fuel, with lifetimes from millions to billions of years. We find that the first stars are very bright ($\sim 10^6 L_\odot$) and cool ($T_{surf} < 10,000$K) during the DS phase, and grow to be very massive (500-1000 times as massive as the Sun). These results differ markedly from the standard picture in the absence of DM heating, in which the maximum mass is about 140$M_\odot$ and the temperatures are much hotter ($T_{surf} > 50,000$K); hence DS should be observationally distinct from standard Pop III stars. Once the dark matter fuel is exhausted, the DS becomes a heavy main sequence star; these stars eventually collapse to form massive black holes that may provide seeds for supermassive black holes observed at early times as well as explanations for recent ARCADE data and for intermediate black holes.
△ Less
Submitted 28 February, 2009;
originally announced March 2009.
-
Dark Stars: Begynnelsen
Authors:
Paolo Gondolo,
Katherine Freese,
Douglas Spolyar,
Anthony Aguirre,
Peter Bodenheimer,
Jeremy A. Sellwood,
Naoki Yoshida
Abstract:
The first phase of stellar evolution in the history of the universe may be Dark Stars, powered by dark matter heating rather than by fusion. Weakly interacting massive particles, which are their own antiparticles, can annihilate and provide an important heat source for the first stars in the universe. This and the following contribution present the story of Dark Stars. In this first part, we des…
▽ More
The first phase of stellar evolution in the history of the universe may be Dark Stars, powered by dark matter heating rather than by fusion. Weakly interacting massive particles, which are their own antiparticles, can annihilate and provide an important heat source for the first stars in the universe. This and the following contribution present the story of Dark Stars. In this first part, we describe the conditions under which dark stars form in the early universe: 1) high dark matter densities, 2) the annihilation products get stuck inside the star, and 3) dark matter heating wins over all other cooling or heating mechanisms.
△ Less
Submitted 28 January, 2009;
originally announced January 2009.
-
Dark Stars: Död och Återuppståndelse
Authors:
Douglas Spolyar,
Katherine Freese,
Paolo Gondolo,
Anthony Aguirre,
Peter Bodenheimer,
Jeremy A. Sellwood,
Naoki Yoshida
Abstract:
The first phase of stellar evolution in the history of the universe may be Dark Stars, powered by dark matter heating rather than by fusion. Weakly interacting massive particles, which are their own antiparticles, can annihilate and provide an important heat source for the first stars in the universe. This and the previous contribution present the story of Dark Stars. In this second part, we des…
▽ More
The first phase of stellar evolution in the history of the universe may be Dark Stars, powered by dark matter heating rather than by fusion. Weakly interacting massive particles, which are their own antiparticles, can annihilate and provide an important heat source for the first stars in the universe. This and the previous contribution present the story of Dark Stars. In this second part, we describe the structure of Dark Stars and predict that they are very massive ($\sim 800 M_\odot$), cool (6000 K), bright ($\sim 10^6 L_\odot$), long-lived ($\sim 10^6$ years), and probable precursors to (otherwise unexplained) supermassive black holes. Later, once the initial dark matter fuel runs out and fusion sets in, dark matter annihilation can predominate again if the scattering cross section is strong enough, so that a Dark Star is born again.
△ Less
Submitted 28 January, 2009;
originally announced January 2009.
-
Discovering the Growth Histories of Exoplanets: The Saturn Analog HD 149026b
Authors:
Sarah E. Dodson-Robinson,
Peter Bodenheimer
Abstract:
The transiting "hot Saturn" HD 149026b, which has the highest mean density of any confirmed planet in the Neptune-Jupiter mass range, has challenged theories of planet formation since its discovery in 2005. Previous investigations could not explain the origin of the planet's 45-110 Earth-mass solid core without invoking catastrophes such as gas giant collisions or heavy planetesimal bombardment…
▽ More
The transiting "hot Saturn" HD 149026b, which has the highest mean density of any confirmed planet in the Neptune-Jupiter mass range, has challenged theories of planet formation since its discovery in 2005. Previous investigations could not explain the origin of the planet's 45-110 Earth-mass solid core without invoking catastrophes such as gas giant collisions or heavy planetesimal bombardment launched by neighboring planets. Here we show that HD 149026b's large core can be successfully explained by the standard core accretion theory of planet formation. The keys to our reconstruction of HD 149026b are (1) applying a model of the solar nebula to describe the protoplanet nursery; (2) placing the planet initially on a long-period orbit at Saturn's heliocentric distance of 9.5 AU; and (3) adjusting the solid mass in the HD 149026 disk to twice that of the solar nebula in accordance with the star's heavy element enrichment. We show that the planet's migration into its current orbit at 0.042 AU is consistent with our formation model. Our study of HD 149026b demonstrates that it is possible to discover the growth history of any planet with a well-defined core mass that orbits a solar-type star.
△ Less
Submitted 16 March, 2009; v1 submitted 5 January, 2009;
originally announced January 2009.
-
Dark Stars: the First Stars in the Universe may be powered by Dark Matter Heating
Authors:
Katherine Freese,
Peter Bodenheimer,
Paolo Gondolo,
Douglas Spolyar
Abstract:
A new line of research on Dark Stars is reviewed, which suggests that the first stars to exist in the universe were powered by dark matter heating rather than by fusion. Weakly Interacting Massive Particles, which may be there own antipartmers, collect inside the first stars and annihilate to produce a heat source that can power the stars. A new stellar phase results, a Dark Star, powered by dar…
▽ More
A new line of research on Dark Stars is reviewed, which suggests that the first stars to exist in the universe were powered by dark matter heating rather than by fusion. Weakly Interacting Massive Particles, which may be there own antipartmers, collect inside the first stars and annihilate to produce a heat source that can power the stars. A new stellar phase results, a Dark Star, powered by dark matter annihilation as long as there is dark matter fuel.
△ Less
Submitted 28 December, 2008;
originally announced December 2008.
-
Models of Jupiter's Growth Incorporating Thermal and Hydrodynamic Constraints
Authors:
Jack J. Lissauer,
Olenka Hubickyj,
Gennaro D'Angelo,
Peter Bodenheimer
Abstract:
[Abridged] We model the growth of Jupiter via core nucleated accretion, applying constraints from hydrodynamical processes that result from the disk-planet interaction. We compute the planet's internal structure using a Henyey-type stellar evolution code. The planet's interactions with the protoplanetary disk are calculated using 3-D hydrodynamic simulations. Previous models of Jupiter's growth…
▽ More
[Abridged] We model the growth of Jupiter via core nucleated accretion, applying constraints from hydrodynamical processes that result from the disk-planet interaction. We compute the planet's internal structure using a Henyey-type stellar evolution code. The planet's interactions with the protoplanetary disk are calculated using 3-D hydrodynamic simulations. Previous models of Jupiter's growth have taken the radius of the planet to be approximately one Hill sphere radius, Rhill. However, 3-D hydrodynamic simulations show that only gas within 0.25Rhill remains bound to the planet, with the more distant gas eventually participating in the shear flow of the protoplanetary disk. Therefore in our new simulations, the planet's outer boundary is placed at the location where gas has the thermal energy to reach the portion of the flow not bound to the planet. We find that the smaller radius increases the time required for planetary growth by ~5%. Thermal pressure limits the rate at which a planet less than a few dozen times as massive as Earth can accumulate gas from the protoplanetary disk, whereas hydrodynamics regulates the growth rate for more massive planets. Within a moderately viscous disk, the accretion rate peaks when the planet's mass is about equal to the mass of Saturn. In a less viscous disk hydrodynamical limits to accretion are smaller, and the accretion rate peaks at lower mass. To account for disk dissipation, we perform some of our simulations of Jupiter's growth within a disk whose surface gas density decreases on a timescale of 3Myr. According to our simulations, proto-Jupiter's distended and thermally-supported envelope was too small to capture the planet's current retinue of irregular satellites as advocated by Pollack et al. (1979).
△ Less
Submitted 28 October, 2008;
originally announced October 2008.
-
Saturn Forms by Core Accretion in 3.4 Myr
Authors:
Sarah E. Dodson-Robinson,
Peter Bodenheimer,
Gregory Laughlin,
Karen Willacy,
Neal J. Turner,
C. A. Beichman
Abstract:
We present two new in situ core accretion simulations of Saturn with planet formation timescales of 3.37 Myr (model S0) and 3.48 Myr (model S1), consistent with observed protostellar disk lifetimes. In model S0, we assume rapid grain settling reduces opacity due to grains from full interstellar values (Podolak 2003). In model S1, we do not invoke grain settling, instead assigning full interstell…
▽ More
We present two new in situ core accretion simulations of Saturn with planet formation timescales of 3.37 Myr (model S0) and 3.48 Myr (model S1), consistent with observed protostellar disk lifetimes. In model S0, we assume rapid grain settling reduces opacity due to grains from full interstellar values (Podolak 2003). In model S1, we do not invoke grain settling, instead assigning full interstellar opacities to grains in the envelope. Surprisingly, the two models produce nearly identical formation timescales and core/atmosphere mass ratios. We therefore observe a new manifestation of core accretion theory: at large heliocentric distances, the solid core growth rate (limited by Keplerian orbital velocity) controls the planet formation timescale. We argue that this paradigm should apply to Uranus and Neptune as well.
△ Less
Submitted 1 October, 2008;
originally announced October 2008.
-
Dark Stars: Dark Matter in the First Stars leads to a New Phase of Stellar Evolution
Authors:
Katherine Freese,
Douglas Spolyar,
Anthony Aguirre,
Peter Bodenheimer,
Paolo Gondolo,
J. A. Sellwood,
Naoki Yoshida
Abstract:
The first phase of stellar evolution in the history of the universe may be Dark Stars, powered by dark matter heating rather than by fusion. Weakly interacting massive particles, which are their own antiparticles, can annihilate and provide an important heat source for the first stars in the the universe. This talk presents the story of these Dark Stars. We make predictions that the first stars…
▽ More
The first phase of stellar evolution in the history of the universe may be Dark Stars, powered by dark matter heating rather than by fusion. Weakly interacting massive particles, which are their own antiparticles, can annihilate and provide an important heat source for the first stars in the the universe. This talk presents the story of these Dark Stars. We make predictions that the first stars are very massive ($\sim 800 M_\odot$), cool (6000 K), bright ($\sim 10^6 L_\odot$), long-lived ($\sim 10^6$ years), and probable precursors to (otherwise unexplained) supermassive black holes. Later, once the initial DM fuel runs out and fusion sets in, DM annihilation can predominate again if the scattering cross section is strong enough, so that a Dark Star is born again.
△ Less
Submitted 4 August, 2008;
originally announced August 2008.
-
Ice Lines, Planetesimal Composition and Solid Surface Density in the Solar Nebula
Authors:
Sarah E. Dodson-Robinson,
Karen Willacy,
Peter Bodenheimer,
Neal J. Turner,
C. A. Beichman
Abstract:
To date, there is no core accretion simulation that can successfully account for the formation of Uranus or Neptune within the observed 2-3 Myr lifetimes of protoplanetary disks. Since solid accretion rate is directly proportional to the available planetesimal surface density, one way to speed up planet formation is to take a full accounting of all the planetesimal-forming solids present in the…
▽ More
To date, there is no core accretion simulation that can successfully account for the formation of Uranus or Neptune within the observed 2-3 Myr lifetimes of protoplanetary disks. Since solid accretion rate is directly proportional to the available planetesimal surface density, one way to speed up planet formation is to take a full accounting of all the planetesimal-forming solids present in the solar nebula. By combining a viscously evolving protostellar disk with a kinetic model of ice formation, we calculate the solid surface density in the solar nebula as a function of heliocentric distance and time. We find three effects that strongly favor giant planet formation: (1) a decretion flow that brings mass from the inner solar nebula to the giant planet-forming region, (2) recent lab results (Collings et al. 2004) showing that the ammonia and water ice lines should coincide, and (3) the presence of a substantial amount of methane ice in the trans-Saturnian region. Our results show higher solid surface densities than assumed in the core accretion models of Pollack et al. (1996) by a factor of 3 to 4 throughout the trans-Saturnian region. We also discuss the location of ice lines and their movement through the solar nebula, and provide new constraints on the possible initial disk configurations from gravitational stability arguments.
△ Less
Submitted 4 December, 2008; v1 submitted 23 June, 2008;
originally announced June 2008.
-
Stellar Structure of Dark Stars: a first phase of Stellar Evolution due to Dark Matter Annihilation
Authors:
Katherine Freese,
Peter Bodenheimer,
Douglas Spolyar,
Paolo Gondolo
Abstract:
Dark Stars are the very first phase of stellar evolution in the history of the universe: the first stars to form (typically at redshifts $z \sim 10-50$) are powered by heating from dark matter (DM) annihilation instead of fusion (if the DM is made of particles which are their own antiparticles). We find equilibrium polytropic configurations for these stars; we start from the time DM heating beco…
▽ More
Dark Stars are the very first phase of stellar evolution in the history of the universe: the first stars to form (typically at redshifts $z \sim 10-50$) are powered by heating from dark matter (DM) annihilation instead of fusion (if the DM is made of particles which are their own antiparticles). We find equilibrium polytropic configurations for these stars; we start from the time DM heating becomes important ($M \sim 1-10 M_\odot$) and build up the star via accretion up to 1000 M$_\odot$. The dark stars, with an assumed particle mass of 100 GeV, are found to have luminosities of a few times $10^6$ L$_\odot$, surface temperatures of 4000--10,000 K, radii $\sim 10^{14}$ cm, lifetimes of at least $ 0.5$ Myr, and are predicted to show lines of atomic and molecular hydrogen. Dark stars look quite different from standard metal-free stars without DM heating: they are far more massive (e.g. $\sim 800 M_\odot$ for 100 GeV WIMPs), cooler, and larger, and can be distinguished in future observations, possibly even by JWST or TMT.
△ Less
Submitted 21 September, 2008; v1 submitted 3 June, 2008;
originally announced June 2008.
-
On the Luminosity of Young Jupiters
Authors:
M. S. Marley,
J. J. Fortney,
O. Hubickyj,
P. Bodenheimer,
J. J. Lissauer
Abstract:
Traditional thermal evolution models of giant planets employ arbitrary initial conditions selected more for computational expediency than physical accuracy. Since the initial conditions are eventually forgotten by the evolving planet, this approach is valid for mature planets, if not young ones. To explore the evolution at young ages of jovian mass planets we have employed model planets created…
▽ More
Traditional thermal evolution models of giant planets employ arbitrary initial conditions selected more for computational expediency than physical accuracy. Since the initial conditions are eventually forgotten by the evolving planet, this approach is valid for mature planets, if not young ones. To explore the evolution at young ages of jovian mass planets we have employed model planets created by one implementation of the core accretion mechanism as initial conditions for evolutionary calculations. We find that young jovian planets are smaller, cooler, and several to 100 times less luminous than predicted by earlier models. Furthermore the time interval during which the young jupiters are fainter than expected depends on the mass of planet. Jupiter mass planets (1 M_J) align with the conventional model luminosity in as little at 20 million years, but 10 M_J planets can take up to 1 billion years to match commonly cited luminosities, given our implementation of the core accretion mechanism. If our assumptions, especially including our treatment of the accretion shock, are correct, then young jovian planets are substantially fainter at young ages than currently believed. These results have important consequences both for detection strategies and for assigning masses to young jovian planets based on observed luminosities.
△ Less
Submitted 27 September, 2006;
originally announced September 2006.
-
Silicon and Nickel Enrichment in Planet-Host Stars: Observations and Implications for the Core-Accretion Theory of Planet Formation
Authors:
Sarah E. Robinson,
Gregory Laughlin,
Peter Bodenheimer,
Debra Fischer
Abstract:
We present evidence that stars with planets exhibit statistically significant silicon and nickel enrichment over the general metal-rich population. We also present simulations which predict silicon enhancement of planet hosts within the context of the core-accretion hypothesis for giant planet formation. Because silicon and oxygen are both alpha elements, [Si/Fe] traces [O/Fe], so the silicon en…
▽ More
We present evidence that stars with planets exhibit statistically significant silicon and nickel enrichment over the general metal-rich population. We also present simulations which predict silicon enhancement of planet hosts within the context of the core-accretion hypothesis for giant planet formation. Because silicon and oxygen are both alpha elements, [Si/Fe] traces [O/Fe], so the silicon enhancement in planet hosts predicts that these stars are oxygen-rich as well. We present new numerical simulations of planet formation by core accretion that establish the timescale on which a Jovian planet reaches rapid gas accretion, t_rga, as a function of solid surface density sigma_solid: (t_rga / 1 Myr) = (sigma_solid / 25.0 g cm^{-2})^{-1.44}. This relation enables us to construct Monte Carlo simulations that predict the fraction of star-disk systems that form planets as a function of [Fe/H], [Si/Fe], disk mass, outer disk radius and disk lifetime. Our simulations reproduce both the known planet-metallicity correlation and the planet-silicon correlation reported in this paper. The simulations predict that 16% of Solar-type stars form Jupiter-mass planets, in agreement with 12% predicted from extrapolation of the observed planet frequency-semimajor axis distribution. Although a simple interpretation of core accretion predicts that the planet-silicon correlation should be much stronger than the planet-nickel correlation, we observe the same degree of silicon and nickel enhancement in planet hosts. If this result persists once more planets have been discovered, it might indicate a complexity in the chemistry of planet formation beyond the simple accumulation of solids in the core accretion theory.
△ Less
Submitted 27 January, 2006;
originally announced January 2006.
-
Formation of Giant Planets by Concurrent Accretion of Solids and Gas inside an Anti-Cyclonic Vortex
Authors:
Hubert Klahr,
Peter Bodenheimer
Abstract:
We study the formation of a giant gas planet by the core--accretion gas--capture process, with numerical simulations, under the assumption that the planetary core forms in the center of an anti-cyclonic vortex. The presence of the vortex concentrates particles of centimeter to meter size from the surrounding disk, and speeds up the core formation process. Assuming that a planet of Jupiter mass i…
▽ More
We study the formation of a giant gas planet by the core--accretion gas--capture process, with numerical simulations, under the assumption that the planetary core forms in the center of an anti-cyclonic vortex. The presence of the vortex concentrates particles of centimeter to meter size from the surrounding disk, and speeds up the core formation process. Assuming that a planet of Jupiter mass is forming at 5 AU from the star, the vortex enhancement results in considerably shorter formation times than are found in standard core--accretion gas--capture simulations. Also, formation of a gas giant is possible in a disk with mass comparable to that of the minimum mass solar nebula.
△ Less
Submitted 19 October, 2005; v1 submitted 17 October, 2005;
originally announced October 2005.
-
Young Jupiters are Faint: New Models of the Early Evolution of Giant Planets
Authors:
J. J. Fortney,
M. S. Marley,
O. Hubickyj,
P. Bodenheimer,
J. J. Lissauer
Abstract:
Here we show preliminary calculations of the cooling and contraction of a 2 MJ planet. These calculations, which are being extended to 1-10 MJ, differ from other published "cooling tracks" in that they include a core accretion-gas capture formation scenario, the leading theory for the formation of gas giant planets. We find that the initial post-accretionary intrinsic luminosity of the planet is…
▽ More
Here we show preliminary calculations of the cooling and contraction of a 2 MJ planet. These calculations, which are being extended to 1-10 MJ, differ from other published "cooling tracks" in that they include a core accretion-gas capture formation scenario, the leading theory for the formation of gas giant planets. We find that the initial post-accretionary intrinsic luminosity of the planet is ~3 times less than previously published models which use arbitrary initial conditions. These differences last a few tens of millions of years. Young giant planets are intrinsically fainter than has been previously appreciated. We also discuss how uncertainties in atmospheric chemistry and the duration of the formation time of giant planets lead to challenges in deriving planetary physical properties from comparison with tabulated model values.
△ Less
Submitted 30 September, 2005;
originally announced October 2005.
-
The N2K Consortium. II. A Transiting Hot Saturn Around HD 149026 With a Large Dense Core
Authors:
B. Sato,
D. A. Fischer,
G. W. Henry,
G. Laughlin,
R. P. Butler,
G. W. Marcy,
S. S. Vogt,
P. Bodenheimer,
S. Ida,
E. Toyota,
A. Wolf,
J. A. Valenti,
L. J. Boyd,
J. A. Johnson,
J. T. Wright,
M. Ammons,
S. Robinson,
J. Strader,
C. McCarthy,
K. L. Tah,
D. Minniti
Abstract:
Doppler measurements from Subaru and Keck have revealed radial velocity variations in the V=8.15, G0IV star HD 149026 consistent with a Saturn-Mass planet in a 2.8766 day orbit. Photometric observations at Fairborn Observatory have detected three complete transit events with depths of 0.003 mag at the predicted times of conjunction. HD 149026 is now the second brightest star with a transiting ex…
▽ More
Doppler measurements from Subaru and Keck have revealed radial velocity variations in the V=8.15, G0IV star HD 149026 consistent with a Saturn-Mass planet in a 2.8766 day orbit. Photometric observations at Fairborn Observatory have detected three complete transit events with depths of 0.003 mag at the predicted times of conjunction. HD 149026 is now the second brightest star with a transiting extrasolar planet. The mass of the star, based on interpolation of stellar evolutionary models, is 1.3 +/- 0.1 solar masses; together with the Doppler amplitude, K=43.3 m s^-1, we derive a planet mass Msin(i)=0.36 Mjup, and orbital radius of 0.042 AU. HD 149026 is chromospherically inactive and metal-rich with spectroscopically derived [Fe/H]=+0.36, Teff=6147 K, log g=4.26 and vsin(i)=6.0 km s^-1. Based on Teff and the stellar luminosity of 2.72 Lsun, we derive a stellar radius of 1.45 Rsun. Modeling of the three photometric transits provides an orbital inclination of 85.3 +/- 1.0 degrees and (including the uncertainty in the stellar radius) a planet radius of 0.725 +/- 0.05 Rjup. Models for this planet mass and radius suggest the presence of a ~67 Mearth core composed of elements heavier than hydrogen and helium. This substantial planet core would be difficult to construct by gravitational instability.
△ Less
Submitted 30 June, 2005;
originally announced July 2005.
-
Formation of giant planets in disks with different metallicities
Authors:
Kacper Kornet,
Peter Bodenheimer,
Michal Rozyczka,
Tomasz F. Stepinski
Abstract:
We present the first results from simulations of processes leading to planet formation in protoplanetary disks with different metallicities. For a given metallicity, we construct a two-dimensional grid of disk models with different initial masses and radii ($M_0$, $R_0$). For each disk, we follow the evolution of gas and solids from an early evolutionary stage, when all solids are in the form of…
▽ More
We present the first results from simulations of processes leading to planet formation in protoplanetary disks with different metallicities. For a given metallicity, we construct a two-dimensional grid of disk models with different initial masses and radii ($M_0$, $R_0$). For each disk, we follow the evolution of gas and solids from an early evolutionary stage, when all solids are in the form of small dust grains, to the stage when most solids have condensed into planetesimals. Then, based on the core accretion - gas capture scenario, we estimate the planet-bearing capability of the environment defined by the final planetesimal swarm and the still evolving gaseous component of the disk. We define the probability of planet-formation, $P_p$, as the normalized fractional area in the ($M_0$, $\log R_0$) plane populated by disks that have formed planets inside 5 AU. With such a definition, and under the assumption that the population of planets discovered at $R$ $<$ 5 AU is not significantly contaminated by planets that have migrated from $R$ $>$ 5 AU, our results agree fairly well with the observed dependence between the probability that a star harbors a planet and the star's metal content. The agreement holds for the disk viscosity parameter $α$ ranging from $10^{-3}$ to $10^{-2}$, and it becomes much poorer when the redistribution of solids relative to the gas is not allowed for during the evolution of model disks.
△ Less
Submitted 5 October, 2004;
originally announced October 2004.
-
Core-Accretion Model Predicts Few Jovian-Mass Planets Orbiting Red Dwarfs
Authors:
Gregory Laughlin,
Peter Bodenheimer,
Fred C. Adams
Abstract:
The favored theoretical explanation for giant planet formation -- in both our solar system and others -- is the core accretion model (although it still has some serious difficulties). In this scenario, planetesimals accumulate to build up planetary cores, which then accrete nebular gas. With current opacity estimates for protoplanetary envelopes, this model predicts the formation of Jupiter-mass…
▽ More
The favored theoretical explanation for giant planet formation -- in both our solar system and others -- is the core accretion model (although it still has some serious difficulties). In this scenario, planetesimals accumulate to build up planetary cores, which then accrete nebular gas. With current opacity estimates for protoplanetary envelopes, this model predicts the formation of Jupiter-mass planets in 2--3 Myr at 5 AU around solar-mass stars, provided that the surface density of solids is enhanced over that of the minimum-mass solar nebula (by a factor of a few). Working within the core-accretion paradigm, this paper presents theoretical calculations which show that the formation of Jupiter-mass planets orbiting M dwarf stars is seriously inhibited at all radial locations (in sharp contrast to solar-type stars). Planet detection programs sensitive to companions of M dwarfs will test this prediction in the near future.
△ Less
Submitted 15 July, 2004;
originally announced July 2004.
-
The Internal Structural Adjustment due to Tidal Heating of Short-Period Inflated Giant Planets
Authors:
Pin-Gao Gu,
Peter H. Bodenheimer,
Douglas N. C. Lin
Abstract:
Several short-period Jupiter-mass planets have been discovered around nearby solar-type stars. During the circularization of their orbits, the dissipation of tidal disturbance by their host stars heats the interior and inflates the sizes of these planets. Based on a series of internal structure calculations for giant planets, we examine the physical processes which determine their luminosity-rad…
▽ More
Several short-period Jupiter-mass planets have been discovered around nearby solar-type stars. During the circularization of their orbits, the dissipation of tidal disturbance by their host stars heats the interior and inflates the sizes of these planets. Based on a series of internal structure calculations for giant planets, we examine the physical processes which determine their luminosity-radius relation. In order for young or intensely heated gas giant planets to attain quasi-hydrostatic equilibria, with sizes comparable to or larger than two Jupiter radii, their interiors must have sufficiently high temperature and low density such that degeneracy effects are relatively weak compared to those in a mature and compact Jupiter. Consequently, the polytropic index monotonically increases whereas the central temperature increases and then decreases with the planets' size. These effects, along with a temperature-sensitive opacity for the radiative surface layers of giant planets, cause the power index of the luminosity's dependence on radius to decrease with increasing radius. For planets larger than twice Jupiter's radius, this index is sufficiently small that they become unstable to tidal inflation. We make comparisons between cases of uniform heating and cases in which the heating is concentrated in various locations within the giant planet. Based on these results we suggest that accurate measurement of the sizes of close-in young Jupiters can be used to probe their internal structure under the influence of tidal heating.
△ Less
Submitted 2 March, 2004;
originally announced March 2004.
-
On the Surface Heating of Synchronously-Spinning Short-Period Jovian Planets
Authors:
Andreas Burkert,
Douglas Lin,
Peter Bodenheimer,
Chris Jones,
Harold Yorke
Abstract:
We consider the atmospheric flow on short-period extra-solar planets through two-dimensional numerical simulations of hydrodynamics with radiation transfer. One side is always exposed to the irradiation from the host star. The other is always in shadow. The temperature of the day side is determined by the equilibrium which the planetary atmosphere establishes with stellar radiation. Part of the…
▽ More
We consider the atmospheric flow on short-period extra-solar planets through two-dimensional numerical simulations of hydrodynamics with radiation transfer. One side is always exposed to the irradiation from the host star. The other is always in shadow. The temperature of the day side is determined by the equilibrium which the planetary atmosphere establishes with stellar radiation. Part of the thermal energy deposited on the day side is advected to the night side by a current. The radiation transfer, the night-side temperature distribution and by this the spectroscopic signature of the planet are sensitive functions of the atmospheric opacity. If the atmosphere contains grains with an abundanceand size distribution comparable to that of the interstellar medium, shallow heating occurs on the day side and the night side cools well below the day side. The temperature difference decreases as the abundance of grains is reduced. A simple analytic model of the dissipation of the circulation flow and associated kinetic heating is considered. This heating effect occurs mostly near the photosphere, not deep enough to significantly affect the size of planets. We show that the surface irradiation suppresses convection near the photospheric region on the day side. In some cases convection zones appear near the surface on the night side. This structural modification may influence the response and dissipation of tidal disturbances and alter the circularization and synchronization time scales.
△ Less
Submitted 18 December, 2003;
originally announced December 2003.