-
Numerical Investigation of the Local Thermo-Chemical State in a Thermo-Acoustically Unstable Dual Swirl Gas Turbine Model Combustor
Authors:
T. Jeremy P. Karpowski,
Federica Ferraro,
Matthias Steinhausen,
Sebastian Popp,
Christoph M. Arndt,
Christian Kraus,
Henning Bockhorn,
Wolfgang Meier,
Christian Hasse
Abstract:
In this work, the thermo-acoustic instabilities of a gas turbine model combustor, the so-called SFB606 combustor, are numerically investigated using Large Eddy Simulation (LES) combined with tabulated chemistry and Artificial Thickened Flame (ATF) approach. The main focus is a detailed analysis of the thermo-acoustic cycle and the accompanied equivalence ratio oscillations and their associated con…
▽ More
In this work, the thermo-acoustic instabilities of a gas turbine model combustor, the so-called SFB606 combustor, are numerically investigated using Large Eddy Simulation (LES) combined with tabulated chemistry and Artificial Thickened Flame (ATF) approach. The main focus is a detailed analysis of the thermo-acoustic cycle and the accompanied equivalence ratio oscillations and their associated convective time delay. In particular, the variations of the thermo-chemical state and flame characteristics over the thermo-acoustic cycle are investigated. For the operating point flame B ($P_{th}=25\,$kW), the burner exhibits thermo-acoustic instabilities with a dominant frequency of 392Hz, the acoustic eigenmode of the inner air inlet duct. These oscillations are accompanied by an equivalence ratio oscillation, which exhibits a convective time delay between the injection in the inner swirler and the flame zone. Two LES, one adiabatic and one accounting for heat losses at the walls by prescribing the wall temperatures from experimental data and Conjugated Heat Transfer (CHT) simulations, are conducted. Results with the enthalpy-dependent table are found to predict the time-averaged flow field in terms of velocity, major species, and temperature with higher accuracy than in the adiabatic case. Further, they indicate, that heat losses should be accounted for to correctly predict the flame position. Subsequently, the thermo-chemical state variations over the thermo-acoustic cycle for the enthalpy-dependant case are analyzed in detail and compared with experimental data in terms of phase-conditioned averaged profiles and conditional averages. An overall good prediction is observed. The results provide a detailed quantitative analysis of the thermo-acoustic feedback mechanism of this burner.
△ Less
Submitted 10 August, 2023;
originally announced August 2023.
-
Combined effects of heat loss and curvature on turbulent flame-wall interaction in a premixed dimethyl ether/air flame
Authors:
Driss Kaddar,
Matthias Steinhausen,
Thorsten Zirwes,
Henning Bockhorn,
Christian Hasse,
Federica Ferraro
Abstract:
This study investigates the effects of curvature on the local heat release rate and mixture fraction during turbulent flame-wall interaction of a lean dimethyl ether/air flame using a fully resolved simulation with a reduced skeletal chemical reaction mechanism and mixture-averaged transport. The region in which turbulent flame-wall interaction affects the flame is found to be restricted to a wall…
▽ More
This study investigates the effects of curvature on the local heat release rate and mixture fraction during turbulent flame-wall interaction of a lean dimethyl ether/air flame using a fully resolved simulation with a reduced skeletal chemical reaction mechanism and mixture-averaged transport. The region in which turbulent flame-wall interaction affects the flame is found to be restricted to a wall distance less than twice the laminar flame thickness. In regions without heat losses, heat release rate and curvature, as well as mixture fraction and curvature, are negatively correlated, which is in accordance with experimental findings. Flame-wall interaction alters the correlation between heat release rate and curvature. An inversion in the sign of the correlation from negative to positive is observed as the flame starts to experience heat losses to the wall. The correlation between mixture fraction and curvature, however, is unaffected by flame-wall interactions and remains negative. Similarly to experimental findings, the investigated turbulent side-wall quenching flame shows both head-on quenching and side-wall quenching-like behavior. The different quenching events are associated with different curvature values in the near-wall region. Furthermore, for medium heat loss, the correlations between heat release rate and curvature are sensitive to the quenching scenario.
△ Less
Submitted 24 February, 2023;
originally announced February 2023.
-
Turbulent flame-wall interaction of premixed flames using Quadrature-based Moment Methods (QbMM) and tabulated chemistry: An a priori analysis
Authors:
M. Steinhausen,
T. Zirwes,
F. Ferraro,
S. Popp,
F. Zhang,
H. Bockhorn,
C. Hasse
Abstract:
Presumed probability density function (PDF) and transported PDF methods are commonly applied to model the turbulence chemistry interaction in turbulent reacting flows. However, little focus has been given to the turbulence chemistry interaction PDF closure for flame-wall interaction. In this study, a quasi-DNS of a turbulent premixed, stoichiometric methane-air flame ignited in a fully developed t…
▽ More
Presumed probability density function (PDF) and transported PDF methods are commonly applied to model the turbulence chemistry interaction in turbulent reacting flows. However, little focus has been given to the turbulence chemistry interaction PDF closure for flame-wall interaction. In this study, a quasi-DNS of a turbulent premixed, stoichiometric methane-air flame ignited in a fully developed turbulent channel flow undergoing side-wall quenching is investigated. The objective of this study is twofold. First, the joint PDF of the progress variable and enthalpy that needs to be accounted for in turbulence chemistry interaction closure models is analyzed in the quasi-DNS configuration, both in the core flow and the near-wall region. Secondly, a transported PDF closure model, based on a Conditional Quadrature Method of Moments approach, and a presumed PDF approach are examined in an a priori analysis using the quasi-DNS as a reference both in the context of Reynolds-Averaged Navier Stokes (RANS) and Large-Eddy Simulations (LESs). The analysis of the joint PDF demonstrates the high complexity of the reactive scalar distribution in the near-wall region. Here, a high correlation between the progress variable and enthalpy is found, where the flame propagation and quenching are present simultaneously. The transported PDF approach presented in this work, based on the Conditional Quadrature Method of Moments, accounts for the moments of the joint PDF of progress variable and enthalpy coupled to a Quenching-Flamelet Generated Manifold. In the a priori analysis both turbulence chemistry interaction PDF closure models show a high accuracy in the core flow. In the near-wall region, however, only the Conditional Quadrature Method of Moments approach is suitable to predict the flame structures.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
Flame-vortex interaction during turbulent side-wall quenching and its implications for flamelet manifolds
Authors:
Matthias Steinhausen,
Thorsten Zirwes,
Federica Ferraro,
Arne Scholtissek,
Henning Bockhorn,
Christian Hasse
Abstract:
In this study, the thermochemical state during turbulent flame-wall interaction of a stoichiometric methane-air flame is investigated using a fully resolved simulation with detailed chemistry. The turbulent side-wall quenching flame shows both head-on quenching and side-wall quenching-like behavior that significantly affects the CO formation in the near-wall region. The detailed insights from the…
▽ More
In this study, the thermochemical state during turbulent flame-wall interaction of a stoichiometric methane-air flame is investigated using a fully resolved simulation with detailed chemistry. The turbulent side-wall quenching flame shows both head-on quenching and side-wall quenching-like behavior that significantly affects the CO formation in the near-wall region. The detailed insights from the simulation are used to evaluate a recently proposed flame (tip) vortex interaction mechanism identified from experiments on turbulent side-wall quenching. It describes the entrainment of burnt gases into the fresh gas mixture near the flame's quenching point. The flame behavior and thermochemical states observed in the simulation are similar to the phenomena observed in the experiments. A novel chemistry manifold is presented that accounts for both the effects of flame dilution due to exhaust gas recirculation in the flame vortex interaction area and enthalpy losses to the wall. The manifold is validated in an a-priori analysis using the simulation results as a reference. The incorporation of exhaust gas recirculation effects in the manifold leads to a significantly increased prediction accuracy in the near-wall regions of flame-vortex interactions.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
Modelling the response of a turbulent jet flame to acoustic forcing in a linearized framework using an active flame approach
Authors:
Thomas Ludwig Kaiser,
Gregoire Varillon,
Wolfgang Polifke,
Feichi Zhang,
Thorsten Zirwes,
Henning Bockhorn,
Kilian Oberleithner
Abstract:
This study performs a linear analysis of a turbulent reacting methane-air jet flame, with the goal of predicting the response of the reacting flow to upstream acoustic actuation. Accounting for heat release fluctuations is a vital component when investigating thermoacoustic instabilities and flame noise in a linearized framework. Unlike previous studies this work develops and applies an active fla…
▽ More
This study performs a linear analysis of a turbulent reacting methane-air jet flame, with the goal of predicting the response of the reacting flow to upstream acoustic actuation. Accounting for heat release fluctuations is a vital component when investigating thermoacoustic instabilities and flame noise in a linearized framework. Unlike previous studies this work develops and applies an active flame approach, meaning the heat release oscillations of the flame resulting from the acoustic fluctuations are taken into account. To yield an active flame approach in the linear framework, a combustion model needs to be linearized. It is demonstrated that linearizing Large Eddy Simulation (LES) and Direct Numerical Simulation (DNS) combustion models leads to closure problems, making their application in the linearized framework troublesome. Reynolds-averaged Navier Stokes (RANS) combustion models, however, prove to circumvent this problem, which makes them suitable candidates for this purpose. The RANS combustion models are linearized around the temporal mean flow of the turbulent jet flame, which is obtained by LES. An a priori analysis shows that a linearized RANS-Eddy Break Up (EBU) model is the best suited among all investigated combustion models for the investigated set-up and reproduces with high accuracy the fluctuations in reaction rate obtained in the LES. Furthermore, the linearized governing equations of the flow including the linearized EBU model for the reaction rate are solved for incoming acoustic perturbations. The response modes show that the reaction rate oscillations are caused by Kelvin-Helmholtz vortex rings, which perturb the jet flame. The results are in good agreement with the LES simulations in terms of the mode shapes of both reaction rate and velocity fluctuations.
△ Less
Submitted 1 December, 2022; v1 submitted 24 November, 2022;
originally announced November 2022.
