-
The prototypical organic-oxide interface: intra-molecular resolution of sexiphenyl on In$_2$O$_3$(111)
Authors:
Margareta Wagner,
Jakob Hofinger,
Martin Setvín,
Lynn A. Boatner,
Michael Schmid,
Ulrike Diebold
Abstract:
The performance of an organic-semiconductor device is critically determined by the geometric alignment, orientation, and ordering of the organic molecules. While an organic multilayer eventually adopts the crystal structure of the organic material, the alignment and configuration at the interface with the substrate/electrode material is essential for charge injection into the organic layer. This w…
▽ More
The performance of an organic-semiconductor device is critically determined by the geometric alignment, orientation, and ordering of the organic molecules. While an organic multilayer eventually adopts the crystal structure of the organic material, the alignment and configuration at the interface with the substrate/electrode material is essential for charge injection into the organic layer. This work focuses on the prototypical organic semiconductor para-sexiphenyl (6P) adsorbed on In$_2$O$_3$(111), the thermodynamically most stable surface of the material that the most common transparent conducting oxide, indium tin oxide (ITO) is based on. The onset of nucleation and formation of the first monolayer are followed with atomically-resolved scanning tunneling microscopy (STM) and non-contact atomic force microscopy (nc-AFM). Annealing to 200$^\circ$C provides sufficient thermal energy for the molecules to orient themselves along the high-symmetry directions of the surface, leading to a single adsorption site. The AFM data suggests a twisted adsorption geometry. With increasing coverage, the 6P molecules first form a loose network with poor long-range order. Eventually the molecules re-orient and form an ordered monolayer. This first monolayer has a densely packed, well-ordered (2$\times$1) structure with one 6P per In$_2$O$_3$(111) substrate unit cell, i.e., a molecular density of 5.64$\times$10$^{13}$ cm$^{-2}$.
△ Less
Submitted 22 August, 2023;
originally announced August 2023.
-
Competing electronic states emerging on polar surfaces
Authors:
Michele Reticcioli,
Zhichang Wang,
Michael Schmid,
Dominik Wrana,
Lynn A. Boatner,
Ulrike Diebold,
Martin Setvin,
Cesare Franchini
Abstract:
Excess charge on polar surfaces of ionic compounds is commonly described by the two-dimensional electron gas (2DEG) model, a homogeneous distribution of charge, spatially-confined in a few atomic layers. Here, by combining scanning probe microscopy with density functional theory calculations, we show that excess charge on the polar TaO$_2$ termination of KTaO$_3$(001) forms more complex electronic…
▽ More
Excess charge on polar surfaces of ionic compounds is commonly described by the two-dimensional electron gas (2DEG) model, a homogeneous distribution of charge, spatially-confined in a few atomic layers. Here, by combining scanning probe microscopy with density functional theory calculations, we show that excess charge on the polar TaO$_2$ termination of KTaO$_3$(001) forms more complex electronic states with different degrees of spatial and electronic localization: charge density waves (CDW) coexist with strongly-localized electron polarons and bipolarons. These surface electronic reconstructions, originating from the combined action of electron-lattice interaction and electronic correlation, are energetically more favorable than the 2DEG solution. They exhibit distinct spectroscopy signals and impact on the surface properties, as manifested by a local suppression of ferroelectric distortions. Controlling the degree of charge ordering and the transition from ferroelectric to paraelectric states could be of great benefit for the generation and transport of carriers in electronic applications.
△ Less
Submitted 1 July, 2022;
originally announced July 2022.
-
An oxygen-rich, tetrahedral surface phase on high-temperature rutile VO$_2$(110)$_\text{T}$ single crystals
Authors:
Margareta Wagner,
Jakub Planer,
Bettina S. J. Heller,
Jens Langer,
Andreas Limbeck,
Lynn A. Boatner,
Hans-Peter Steinrück,
Josef Redinger,
Florian Maier,
Florian Mittendorfer,
Michael Schmid,
Ulrike Diebold
Abstract:
Vanadium dioxide undergoes a metal-insulator transition (MIT) from an insulating (monoclinic) to a metallic (tetragonal) phase close to room temperature, which makes it a promising functional material for many applications, e.g. as chemical sensors. Not much is known about its surface and interface properties, although these are critical in many of its applications. This work presents an atomic-sc…
▽ More
Vanadium dioxide undergoes a metal-insulator transition (MIT) from an insulating (monoclinic) to a metallic (tetragonal) phase close to room temperature, which makes it a promising functional material for many applications, e.g. as chemical sensors. Not much is known about its surface and interface properties, although these are critical in many of its applications. This work presents an atomic-scale investigation of the tetragonal rutile VO$_2$(110)$_\text{T}$ single-crystal surface and reports results obtained with scanning tunneling microscopy (STM), low-energy electron diffraction (LEED) and X-ray photoelectron spectroscopy (XPS), supported by density-functional theory-based (DFT) calculations. The surface reconstructs into an oxygen-rich (2$\times$2) superstructure that coexists with small patches of the underlying, unreconstructed (110)-(1$\times$1) surface. The best structural model for the (2$\times$2) surface termination, conceptually derived from a vanadium pentoxide (001) monolayer, consists of rings of corner-shared tetrahedra. Over a wide range of oxygen chemical potentials this reconstruction is more stable than the unreconstructed (110) surface as well as models proposed in the literature.
△ Less
Submitted 1 July, 2021;
originally announced July 2021.
-
Defect chemistry of Eu dopants in NaI scintillators studied by atomically resolved force microscopy
Authors:
Manuel Ulreich,
Lynn A. Boatner,
Igor Sokolovic,
Michele Reticcioli,
Flora Poelzleitner,
Cesare Franchini,
Michael Schmid,
Ulrike Diebold,
Martin Setvin
Abstract:
Activator impurities and their distribution in the host lattice play a key role in scintillation phenomena. Here a combination of cross-sectional noncontact atomic force microscopy (nc-AFM), X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) was used to study the distribution of Eu2+ dopants in a NaI scintillator activated by 3% of EuI2. Two types of precipitate structures…
▽ More
Activator impurities and their distribution in the host lattice play a key role in scintillation phenomena. Here a combination of cross-sectional noncontact atomic force microscopy (nc-AFM), X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) was used to study the distribution of Eu2+ dopants in a NaI scintillator activated by 3% of EuI2. Two types of precipitate structures were found. First, needle-shaped EuI2 precipitates with a layered structure are likely responsible for scattering the scintillation light. In transparent crystals with good scintillation properties, precipitates with a cubic crystal structure and a size below 4 nm were found. A surprisingly low concentration of point defects was detected in all of the investigated samples. Upon annealing, Eu segregates towards the surface, which results in the formation of an ordered hexagonal overlayer with the EuI2 composition and a pronounced, unidirectional moire pattern.
△ Less
Submitted 30 July, 2019; v1 submitted 5 September, 2018;
originally announced September 2018.
-
Bulk and surface characterization of In$_2$O$_3$(001) single crystals
Authors:
Daniel R. Hagleitner,
Peter Jacobson,
Sara Blomberg,
Karina Schulte,
Edvin Lundgren,
Markus Kubicek,
Jürgen Fleig,
Frank Kubel,
Christoph Puls,
Andreas Limbeck,
Herbert Hutter,
Lynn A. Boatner,
Michael Schmid,
Ulrike Diebold
Abstract:
A comprehensive bulk and surface investigation of high-quality In$_2$O$_3$(001) single crystals is reported. The transparent-yellow, cube-shaped single crystals were grown using the flux method. Inductively coupled plasma mass spectrometry (ICP-MS) reveals small residues of Pb, Mg, and Pt in the crystals. Four-point-probe measurements show a resistivity of 2.0 $\pm$ 0.5 $\times$ 10$^5$ Ω cm, which…
▽ More
A comprehensive bulk and surface investigation of high-quality In$_2$O$_3$(001) single crystals is reported. The transparent-yellow, cube-shaped single crystals were grown using the flux method. Inductively coupled plasma mass spectrometry (ICP-MS) reveals small residues of Pb, Mg, and Pt in the crystals. Four-point-probe measurements show a resistivity of 2.0 $\pm$ 0.5 $\times$ 10$^5$ Ω cm, which translates into a carrier concentration of $\approx$10$^{12}$ cm$^{-3}$. The results from x-ray diffraction (XRD) measurements revise the lattice constant to 10.1150(5) Å from the previously accepted value of 10.117 Å. Scanning tunneling microscopy (STM) images of a reduced (sputtered/annealed) and oxidized (exposure to atomic oxygen at 300 °C) surface show a step height of 5 Å, which indicates a preference for one type of surface termination. The surfaces stay flat without any evidence for macroscopic faceting under any of these preparation conditions. A combination of low-energy ion scattering (LEIS) and atomically resolved STM indicates an indium-terminated surface with small islands of 2.5 Å height under reducing conditions, with a surface structure corresponding to a strongly distorted indium lattice. Scanning tunneling spectroscopy (STS) reveals a pronounced surface state at the Fermi level ($E_F$). Photoelectron spectroscopy (PES) shows additional, deep-lying band gap states, which can be removed by exposure of the surface to atomic oxygen. Oxidation also results in a shoulder at the O 1s core level at a higher binding energy, possibly indicative of a surface peroxide species. A downward band bending of 0.4 eV is observed for the reduced surface, while the band bending of the oxidized surface is of the order of 0.1 eV or less.
△ Less
Submitted 12 April, 2018;
originally announced April 2018.
-
Well-Ordered In Adatoms at the In$_2$O$_3$(111) Surface Created by Fe Deposition
Authors:
Margareta Wagner,
Peter Lackner,
Steffen Seiler,
Stefan Gerhold,
Jacek Osiecki,
Karina Schulte,
Lynn A. Boatner,
Michael Schmid,
Bernd Meyer,
Ulrike Diebold
Abstract:
Metal deposition on oxide surfaces usually results in adatoms, clusters, or islands of the deposited material, where defects in the surface often act as nucleation centers. Here an alternate configuration is reported. After the vapor deposition of Fe on the In$_2$O$_3$(111) surface at room temperature, ordered adatoms are observed with scanning tunneling microscopy. These are identical to the In a…
▽ More
Metal deposition on oxide surfaces usually results in adatoms, clusters, or islands of the deposited material, where defects in the surface often act as nucleation centers. Here an alternate configuration is reported. After the vapor deposition of Fe on the In$_2$O$_3$(111) surface at room temperature, ordered adatoms are observed with scanning tunneling microscopy. These are identical to the In adatoms that form when the sample is reduced by heating in ultrahigh vacuum. Density functional theory (DFT) calculations confirm that Fe interchanges with In in the topmost layer, pushing the excess In atoms to the surface where they arrange as a well-ordered adatom array.
△ Less
Submitted 12 April, 2018;
originally announced April 2018.
-
Ultrafast Carrier Dynamics in VO$_2$ across the Pressure-Induced Insulator-to-Metal Transition
Authors:
Johannes M. Braun,
Harald Schneider,
Manfred Helm,
Rafał Mirek,
Lynn A. Boatner,
Robert E. Marvel,
Richard F. Haglund,
Alexej Pashkin
Abstract:
We utilize near-infrared pump and mid-infrared probe spectroscopy to investigate the ultrafast electronic response of pressurized VO$_2$. Distinct pump-probe signals and a pum** threshold behavior are observed even in the pressure-induced metallic state showing a noticeable amount of localized electronic states. Our results are consistent with a scenario of a bandwidth-controlled Mott-Hubbard tr…
▽ More
We utilize near-infrared pump and mid-infrared probe spectroscopy to investigate the ultrafast electronic response of pressurized VO$_2$. Distinct pump-probe signals and a pum** threshold behavior are observed even in the pressure-induced metallic state showing a noticeable amount of localized electronic states. Our results are consistent with a scenario of a bandwidth-controlled Mott-Hubbard transition.
△ Less
Submitted 29 August, 2017;
originally announced August 2017.
-
Highly sensitive simple homodyne phase detector for ultrasonic pulse-echo measurements
Authors:
John Grossmann,
Alexey Suslov,
Grace Yong,
Lynn A. Boatner,
Oleksiy Svitelskiy
Abstract:
We have designed and built a modern versatile research-grade instrument for ultrasound pulse-echo probing of the elastic properties of a wide range of materials under laboratory conditions. The heart of the instrument lies in an AD8302 microchip: a gain and phase detector from Analog Devices, Inc. To construct the device, we have implemented a schematic that utilizes the homodyne principle for sig…
▽ More
We have designed and built a modern versatile research-grade instrument for ultrasound pulse-echo probing of the elastic properties of a wide range of materials under laboratory conditions. The heart of the instrument lies in an AD8302 microchip: a gain and phase detector from Analog Devices, Inc. To construct the device, we have implemented a schematic that utilizes the homodyne principle for signal processing instead of the traditional superheterodyne approach. This design allows one to measure phase shifts with high precision and linearity over the entire range of $0-360^\circ$. The system is simple in construction and usage; it makes ultrasound measurements easily accessible to a broad range of researchers. It was tested by measuring the temperature dependence of the ultrasound speed and attenuation in a KTa$_{0.92}$Nb$_{0.08}$O$_{3}$ (KTN) single crystal at a frequency of $\sim$ 40 MHz. The tests were performed in the vicinity of the ferroelectric transitions where the large variations of the speed and attenuation demand a detector with outstanding characteristics. The described detector has a wide dynamic range and allows for measuring in a single run over the whole temperature range of the ferroelectric transitions, rather than just in limited intervals available previously. Moreover, due to the wide dynamic range of the gain measurements and high sensitivity this instrument was able to reveal previously unresolvable features associated with the development of the ferroelectric transitions of KTN crystals.
△ Less
Submitted 22 March, 2016;
originally announced March 2016.
-
Fluctuating defects in the incipient relaxor K$_{1-x}$Li$_x$TaO$_3$ (x=0.02)
Authors:
C. Stock,
P. M. Gehring,
G. Xu,
D. Lamago,
D. Reznik,
M. Russina,
J. Wen,
L. A. Boatner
Abstract:
We report neutron scattering measurements of the structural correlations associated with the apparent relaxor transition in K$_{1-x}$Li$_x$TaO$_3$ for $x=0.02$ (KLT(0.02)). This compound displays a broad and frequency-dependent peak in the dielectric permittivity, which is the accepted hallmark of all relaxors. However, no evidence of elastic diffuse scattering or any soft mode anomaly is observed…
▽ More
We report neutron scattering measurements of the structural correlations associated with the apparent relaxor transition in K$_{1-x}$Li$_x$TaO$_3$ for $x=0.02$ (KLT(0.02)). This compound displays a broad and frequency-dependent peak in the dielectric permittivity, which is the accepted hallmark of all relaxors. However, no evidence of elastic diffuse scattering or any soft mode anomaly is observed in KLT(0.02) [J. Wen et al., Phys. Rev. B 78, 144202 (2008)], a situation that diverges from that in other relaxors such as PbMg$_{1/3}$Nb$_{2/3}$O$_3$. We resolve this dichotomy by showing that the structural correlations associated with the transition in KLT(0.02) are purely dynamic at all temperatures, having a timescale on the order of $\sim$THz. These fluctuations are overdamped, non-propagating, and spatially uncorrelated. Identical measurements made on pure KTaO$_3$ show that they are absent (within experimental error) in the undoped parent material. They exhibit a temperature dependence that correlates well with the dielectric response, which suggests that they are associated with local ferroelectric regions induced by the Li$^+$ do**. The ferroelectric transition that is induced by the introduction of Li$^+$ cations is therefore characterized by quasistatic fluctuations, which represents a stark contrast to the soft harmonic-mode-driven transition observed in conventional perovskite ferroelectrics like PbTiO$_3$. The dynamic, glass-like, structural correlations in KLT(0.02) are much faster than those measured in random-field-based lead-based relaxors, which exhibit a frequency scale of order of $\sim$GHz and are comparatively better correlated spatially. Our results support the view that random fields give rise to the relaxor phenomena, and that the glass-like dynamics observed here characterize a nascent response.
△ Less
Submitted 20 May, 2015;
originally announced May 2015.
-
Dielectric transparency induced by hetero-phase oscillations near the phase transition of relaxor ferroelectrics
Authors:
J. Toulouse,
R. K. Pattnaik,
L. A. Boatner
Abstract:
We report the observation of a "transparency window" in the dielectric resonant absorption spectrum of the relaxor ferroelectric K1-xLixTaO3 (KLT) in the vicinity of its weakly first order transition. This phenomenon is shown to be conceptually similar to the electro-magnetically induced transparency (EIT) phenomenon observed in atomic vapors, which can be modeled classically by a driven master -s…
▽ More
We report the observation of a "transparency window" in the dielectric resonant absorption spectrum of the relaxor ferroelectric K1-xLixTaO3 (KLT) in the vicinity of its weakly first order transition. This phenomenon is shown to be conceptually similar to the electro-magnetically induced transparency (EIT) phenomenon observed in atomic vapors, which can be modeled classically by a driven master -slave oscillator system. In KLT, it reveals the presence of macroscopic hetero-phase fluctuations and provides unique information on the nature and mechanism of the phase transition in relaxors.
△ Less
Submitted 12 March, 2012;
originally announced March 2012.
-
The effect of local dipole moments on the structure and lattice dynamics of K0.98Li0.02TaO3
Authors:
**sheng Wen,
Guangyong Xu,
C. Stock,
P. M. Gehring,
Z. Zhong,
L. A. Boatner,
E. L. Venturini,
G. A. Samara
Abstract:
We present high energy x-ray (67 keV) and neutron scattering measurements on a single crystal of K$_{1-x}$Li$_x$TaO$_3$ for which the Li content ($x=0.02$) is less than $x_c = 0.022$, the critical value below which no structural phase transitions have been reported in zero field. While the crystal lattice does remain cubic down to T=10 K under both zero-field and field-cooled ($E \le 4$ kV/cm) c…
▽ More
We present high energy x-ray (67 keV) and neutron scattering measurements on a single crystal of K$_{1-x}$Li$_x$TaO$_3$ for which the Li content ($x=0.02$) is less than $x_c = 0.022$, the critical value below which no structural phase transitions have been reported in zero field. While the crystal lattice does remain cubic down to T=10 K under both zero-field and field-cooled ($E \le 4$ kV/cm) conditions, indications of crystal symmetry lowering are seen at $T_C=63$ K where the Bragg peak intensity changes significantly. A strong and frequency-dependent dielectric permittivity is observed at ambient pressure, a defining characteristic of relaxors. However an extensive search for static polar nanoregions, which is also widely associated with relaxor materials, detected no evidence of elastic neutron diffuse scattering between 300 K and 10 K. Neutron inelastic scattering methods were used to characterize the transverse acoustic and optic phonons (TA1 and TO1 modes) near the (200) and (002) Bragg peaks. The zone center TO1 mode softens monotonically with cooling but never reaches zero energy in either zero field or in external electric fields of up to 4 kV/cm. These results are consistent with the behavior expected for a dipolar glass in which the local polar moments are frozen and exhibit no long-range order at low temperatures.
△ Less
Submitted 9 October, 2008; v1 submitted 30 June, 2008;
originally announced June 2008.
-
Dielectric properties and lattice dynamics of Ca-doped K$_{0.95}$Li$_{0.05}$TaO$_{3}$
Authors:
S. Wakimoto,
G. A. Samara,
R. K. Grubbs,
E. L. Venturini,
L. A. Boatner,
G. Xu,
G. Shirane,
S. -H. Lee
Abstract:
Relaxor behavior and lattice dynamics have been studied for a single crystal of K$_{1-x}$Li$_x$TaO$_3$ $(x=0.05)$, where a small amount of a Ca impurity ($\sim 15$~ppm) was incorporated. The dielectric measurements revealed Debye-like relaxations with Arrhenius activation energies of 80 and 240 meV that are assigned to Li$^+$ dipoles and the Li$^+$-Li$^+$ dipolar pairs, respectively. In the neut…
▽ More
Relaxor behavior and lattice dynamics have been studied for a single crystal of K$_{1-x}$Li$_x$TaO$_3$ $(x=0.05)$, where a small amount of a Ca impurity ($\sim 15$~ppm) was incorporated. The dielectric measurements revealed Debye-like relaxations with Arrhenius activation energies of 80 and 240 meV that are assigned to Li$^+$ dipoles and the Li$^+$-Li$^+$ dipolar pairs, respectively. In the neutron scattering results, diffuse scattering ridges appear around the nuclear Bragg peaks below $\sim 150$ K and phonon line broadening features start to appear at even higher temperatures suggesting that polar nano-regions (PNR's) start to form at these temperatures. These results are supported by the dielectric data that reveal relaxor behavior starting at $\sim 200$ K on cooling. From analyses of the diffuse intensities, the displacements include a uniform phase shift of all of the atoms in addition to the atomic displacements corresponding to a polarization vector of the transverse optic soft ferroelectric mode, a finding that is analogous to that in the prototypical relaxor material Pb(Mg$_{1/3}$Nb$_{2/3}$)O$_3$.
△ Less
Submitted 3 August, 2006;
originally announced August 2006.
-
The broad Brillouin doublets and central peak of KTaO_3
Authors:
E. Farhi,
A. K. Tagantsev,
B. Hehlen,
R. Currat,
L. A. Boatner,
E. Courtens
Abstract:
The incipient ferroelectric KTaO3 presents low-T Brillouin spectra anomalies,e.g. a broad central peak (CP), and some additional Brillouin doublets (BD), whose origin is interpreted in terms of phonon-density fluctuation processes. A parameterisation from new extensive high-resolution neutron-scattering measurements is used to show that hydrodynamic second sound from high dam** (compared to BD…
▽ More
The incipient ferroelectric KTaO3 presents low-T Brillouin spectra anomalies,e.g. a broad central peak (CP), and some additional Brillouin doublets (BD), whose origin is interpreted in terms of phonon-density fluctuation processes. A parameterisation from new extensive high-resolution neutron-scattering measurements is used to show that hydrodynamic second sound from high dam** (compared to BD frequency) TA phonons may exist in the crystal. Furthermore, low dam** thermal phonons may scatter light through two-phonon difference processes and appear on the Brillouin spectra either as a sharp or a broader BD, depending on the phonon dam** and group velocity . The comparison between computed anisotropies and experimental measurements favours the second process.
△ Less
Submitted 1 September, 2000;
originally announced September 2000.
-
The Broad Brillouin Doublet and CP of Ktao_3 : Second Sound vs. Two-Phonon Difference Scattering
Authors:
E. Farhi,
A. K. Tagantsev,
B. Hehlen,
R. Currat,
L. A. Boatner,
E. Courtens
Abstract:
Low-T Brillouin spectra of the incipient ferroelectric KTaO3 exhibit a broad central peak (CP), and additional Brillouin doublets (BD), that can both be related to phonon-density fluctuations. On the basis of new high-resolution neutron data obtained of low-lying phonon branches, we analysed the phonon-kinetics mechanisms that are possibly the origin of these unusual features. Firstly, transvers…
▽ More
Low-T Brillouin spectra of the incipient ferroelectric KTaO3 exhibit a broad central peak (CP), and additional Brillouin doublets (BD), that can both be related to phonon-density fluctuations. On the basis of new high-resolution neutron data obtained of low-lying phonon branches, we analysed the phonon-kinetics mechanisms that are possibly the origin of these unusual features. Firstly, transverse acoustic (TA) phonons whose normal dam** is faster than the BD frequency can produce hydrodynamic second sound. Secondly, two-phonon difference scattering from low dam** thermal transverse phonons contribute to the spectra with either a sharp or a broader doublet, depending on the phonon group velocity and anisotropy of dispersion surfaces. The position of the observed sharp doublet is consistent with both mechanisms, but a comparison of the computed and experimental anisotropies favours the second process.
△ Less
Submitted 1 September, 2000;
originally announced September 2000.
-
Low energy phonon spectrum and its parameterization in pure KTaO3 under 80 K
Authors:
E. Farhi,
A. K. Tagantsev,
R. Currat,
B. Hehlen,
E. Courtens,
L. A. Boatner
Abstract:
High resolution data on low energy phonon branches (acoustic and soft optic) along the three principal symmetry axes in pure KTaO3 were obtained by cold neutron inelastic scattering between 10 and 80 K. Additional off-principal axis measurements were performed to characterize the dispersion anisotropy (away from the <100> and <110> axes). The parameters of the phenomenological model proposed by…
▽ More
High resolution data on low energy phonon branches (acoustic and soft optic) along the three principal symmetry axes in pure KTaO3 were obtained by cold neutron inelastic scattering between 10 and 80 K. Additional off-principal axis measurements were performed to characterize the dispersion anisotropy (away from the <100> and <110> axes). The parameters of the phenomenological model proposed by Vaks are refined in order to successfully describe the experimental low temperature (10 < T < 100 K) dispersion curves, over an appreciable reciprocal space volume around the zone center (|q| < 0.25 rlu). The refined model, which involves only 4 temperature-independent adjustable parameters, is intended to serve as a basis for quantitative computations of multiphonon processes.
△ Less
Submitted 1 September, 2000;
originally announced September 2000.